Transformative Soundscape Design: Proven Strategies for Smooth Volume Fading and Elevating with Adobe After Effects

How to Fade In and Fade Out Audio in Adobe After Effects

Benjamin Arango

Mar 27, 2024• Proven solutions

Many of us get the first association when Adobe After Effects is mentioned: stunning motion graphics and breathtaking visual effects. Very few people think of audio editing when they talk about AE, even though this application offers a simple way to add Fade in and fade out effects to audio files used in soundtracks.

However, you will need to have at least basic video and sound editing skills to fade in and fade out audio files in AE since the app doesn’t offer a preset that you can drag and drop to the timeline. So, in this article, we will show how to create the Fade in and fade out effects in Adobe After Effects in just a few simple steps.

Read More to Get: Best Audio Mixer Software to Trim Your Sound Easily >>

Adding the Fade In and Fade Out Effects to Audio Files in AE

Step 1: Check audio waveform in After Effects

Once you’ve created a new project in AE and you’ve imported the audio files you’d like to include in the soundtrack of the video you’re making, you should place that audio file on the timeline. Click on the arrow located next to the audio file, then click on the Audio arrow that will be displayed under the file, and finally click on the Waveform arrow. This will enable you to see the waveform of the audio file you’d like to edit on the timeline and allow you to add Fade in and fade out effects with more precision. The file you added to your composition will be displayed as a layer in the Composition tab located in the lower-left region of the software’s interface.

Step 2: Add a keyframe to the audio file

The next thing you will have to do is place the playhead at the exact location where you want the Fade In effect to start. In most cases, Fade effects are added at the starting point of the audio file, so you should position the playhead at the beginning of the timeline or zero seconds. You will be able to see a stopwatch next to the Audio Levels option located in the Composition tab. Click on it to add the first keyframe and assign a negative value to the Audio Level setting. -100db or -50db values will make the audio file silent, and you can pick either based on how long you want the Fade in effect to last. If you don’t know how to use keyframes in After Effects, this article will give you some info .

You may also like: 15 Free After Effects Templates to Power up Your Video

Step 3: Complete Fade out/in audio in After Effects

Move the playhead to the location where you want the effect to end and add another keyframe by clicking on the ‘Add or remove keyframe at current time’ icon. Set the Audio Level value to 0db, and that is it. You’ve created the Fade in effect. Keep in mind that you can use more than two keyframes to fade in audio, enabling you to increase the audio level gradually. The process of creating the Fade effect requires you to add a keyframe that has a 0db value a few seconds before the clip ends and then add another keyframe at the very end of the audio file that has -50 or -100db audio level value.

Tips For Making Better Fade In and Fade Out Effects

The process of creating a fade in or a fade out effect in AE is quite simple, but it is up to you to discover creative ways of using these effects. Here are a few tips that can help you use these audio effects more creatively.

1. Avoid Hard Cuts

A high pitch sound at the very begging of a new sequence can ruin your soundtrack and ultimately the entire video, so in case you’ve cut an audio file at the location where the sound peaks, you can apply a fade in effect to make the transition between two audio files softer.

You may also like: How to Cut Video in After Effects

2. Be Mindful of Audio Compression

Audio compression is a process that reduces loud sounds and amplifies quiet sounds, resulting from the audio file’s dynamic range being compressed. In most cases, you won’t notice the effects of audio compression, but if you compress an audio file too much, you might get some unwanted side effects if you add a fade out effect to that file. That’s why it is best to rely on the default audio compression features a video or audio editing app offers.

3. Use the Fade In and Fade Out Effects Creatively

Besides opening and closing scenes, you can also use the Fade in and fade out effects to mix two different tracks while the shot is still in progress. Fade out one track, make it look like a scene is ending, and then introduce a new theme that changes the mood of that scene. The important thing is to avoid reducing the audio level all the way to -100db because you might end up creating silence in a scene that disrupts the flow of an entire video.

Conclusion

Fading in or fading out audio files in Adobe After Effects doesn’t require much effort, as you have to add a few keyframes to the file and adjust the Audio Level value. However, finding the best way to improve the quality of your soundtrack by applying these effects may take some practice. Do you often add Fade in and fade out audio effects in AE? Leave a comment below and share your experiences with us.

If you want to fade in/out audio easily, we recommend using Filmora . It is designed for people who wish to edit professional videos with simple-to-use features. Besides Fade in/out audio in Filmora, you can automatically sync audio to video. Download it now to have a try (free)!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Many of us get the first association when Adobe After Effects is mentioned: stunning motion graphics and breathtaking visual effects. Very few people think of audio editing when they talk about AE, even though this application offers a simple way to add Fade in and fade out effects to audio files used in soundtracks.

However, you will need to have at least basic video and sound editing skills to fade in and fade out audio files in AE since the app doesn’t offer a preset that you can drag and drop to the timeline. So, in this article, we will show how to create the Fade in and fade out effects in Adobe After Effects in just a few simple steps.

Read More to Get: Best Audio Mixer Software to Trim Your Sound Easily >>

Adding the Fade In and Fade Out Effects to Audio Files in AE

Step 1: Check audio waveform in After Effects

Once you’ve created a new project in AE and you’ve imported the audio files you’d like to include in the soundtrack of the video you’re making, you should place that audio file on the timeline. Click on the arrow located next to the audio file, then click on the Audio arrow that will be displayed under the file, and finally click on the Waveform arrow. This will enable you to see the waveform of the audio file you’d like to edit on the timeline and allow you to add Fade in and fade out effects with more precision. The file you added to your composition will be displayed as a layer in the Composition tab located in the lower-left region of the software’s interface.

Step 2: Add a keyframe to the audio file

The next thing you will have to do is place the playhead at the exact location where you want the Fade In effect to start. In most cases, Fade effects are added at the starting point of the audio file, so you should position the playhead at the beginning of the timeline or zero seconds. You will be able to see a stopwatch next to the Audio Levels option located in the Composition tab. Click on it to add the first keyframe and assign a negative value to the Audio Level setting. -100db or -50db values will make the audio file silent, and you can pick either based on how long you want the Fade in effect to last. If you don’t know how to use keyframes in After Effects, this article will give you some info .

You may also like: 15 Free After Effects Templates to Power up Your Video

Step 3: Complete Fade out/in audio in After Effects

Move the playhead to the location where you want the effect to end and add another keyframe by clicking on the ‘Add or remove keyframe at current time’ icon. Set the Audio Level value to 0db, and that is it. You’ve created the Fade in effect. Keep in mind that you can use more than two keyframes to fade in audio, enabling you to increase the audio level gradually. The process of creating the Fade effect requires you to add a keyframe that has a 0db value a few seconds before the clip ends and then add another keyframe at the very end of the audio file that has -50 or -100db audio level value.

Tips For Making Better Fade In and Fade Out Effects

The process of creating a fade in or a fade out effect in AE is quite simple, but it is up to you to discover creative ways of using these effects. Here are a few tips that can help you use these audio effects more creatively.

1. Avoid Hard Cuts

A high pitch sound at the very begging of a new sequence can ruin your soundtrack and ultimately the entire video, so in case you’ve cut an audio file at the location where the sound peaks, you can apply a fade in effect to make the transition between two audio files softer.

You may also like: How to Cut Video in After Effects

2. Be Mindful of Audio Compression

Audio compression is a process that reduces loud sounds and amplifies quiet sounds, resulting from the audio file’s dynamic range being compressed. In most cases, you won’t notice the effects of audio compression, but if you compress an audio file too much, you might get some unwanted side effects if you add a fade out effect to that file. That’s why it is best to rely on the default audio compression features a video or audio editing app offers.

3. Use the Fade In and Fade Out Effects Creatively

Besides opening and closing scenes, you can also use the Fade in and fade out effects to mix two different tracks while the shot is still in progress. Fade out one track, make it look like a scene is ending, and then introduce a new theme that changes the mood of that scene. The important thing is to avoid reducing the audio level all the way to -100db because you might end up creating silence in a scene that disrupts the flow of an entire video.

Conclusion

Fading in or fading out audio files in Adobe After Effects doesn’t require much effort, as you have to add a few keyframes to the file and adjust the Audio Level value. However, finding the best way to improve the quality of your soundtrack by applying these effects may take some practice. Do you often add Fade in and fade out audio effects in AE? Leave a comment below and share your experiences with us.

If you want to fade in/out audio easily, we recommend using Filmora . It is designed for people who wish to edit professional videos with simple-to-use features. Besides Fade in/out audio in Filmora, you can automatically sync audio to video. Download it now to have a try (free)!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Many of us get the first association when Adobe After Effects is mentioned: stunning motion graphics and breathtaking visual effects. Very few people think of audio editing when they talk about AE, even though this application offers a simple way to add Fade in and fade out effects to audio files used in soundtracks.

However, you will need to have at least basic video and sound editing skills to fade in and fade out audio files in AE since the app doesn’t offer a preset that you can drag and drop to the timeline. So, in this article, we will show how to create the Fade in and fade out effects in Adobe After Effects in just a few simple steps.

Read More to Get: Best Audio Mixer Software to Trim Your Sound Easily >>

Adding the Fade In and Fade Out Effects to Audio Files in AE

Step 1: Check audio waveform in After Effects

Once you’ve created a new project in AE and you’ve imported the audio files you’d like to include in the soundtrack of the video you’re making, you should place that audio file on the timeline. Click on the arrow located next to the audio file, then click on the Audio arrow that will be displayed under the file, and finally click on the Waveform arrow. This will enable you to see the waveform of the audio file you’d like to edit on the timeline and allow you to add Fade in and fade out effects with more precision. The file you added to your composition will be displayed as a layer in the Composition tab located in the lower-left region of the software’s interface.

Step 2: Add a keyframe to the audio file

The next thing you will have to do is place the playhead at the exact location where you want the Fade In effect to start. In most cases, Fade effects are added at the starting point of the audio file, so you should position the playhead at the beginning of the timeline or zero seconds. You will be able to see a stopwatch next to the Audio Levels option located in the Composition tab. Click on it to add the first keyframe and assign a negative value to the Audio Level setting. -100db or -50db values will make the audio file silent, and you can pick either based on how long you want the Fade in effect to last. If you don’t know how to use keyframes in After Effects, this article will give you some info .

You may also like: 15 Free After Effects Templates to Power up Your Video

Step 3: Complete Fade out/in audio in After Effects

Move the playhead to the location where you want the effect to end and add another keyframe by clicking on the ‘Add or remove keyframe at current time’ icon. Set the Audio Level value to 0db, and that is it. You’ve created the Fade in effect. Keep in mind that you can use more than two keyframes to fade in audio, enabling you to increase the audio level gradually. The process of creating the Fade effect requires you to add a keyframe that has a 0db value a few seconds before the clip ends and then add another keyframe at the very end of the audio file that has -50 or -100db audio level value.

Tips For Making Better Fade In and Fade Out Effects

The process of creating a fade in or a fade out effect in AE is quite simple, but it is up to you to discover creative ways of using these effects. Here are a few tips that can help you use these audio effects more creatively.

1. Avoid Hard Cuts

A high pitch sound at the very begging of a new sequence can ruin your soundtrack and ultimately the entire video, so in case you’ve cut an audio file at the location where the sound peaks, you can apply a fade in effect to make the transition between two audio files softer.

You may also like: How to Cut Video in After Effects

2. Be Mindful of Audio Compression

Audio compression is a process that reduces loud sounds and amplifies quiet sounds, resulting from the audio file’s dynamic range being compressed. In most cases, you won’t notice the effects of audio compression, but if you compress an audio file too much, you might get some unwanted side effects if you add a fade out effect to that file. That’s why it is best to rely on the default audio compression features a video or audio editing app offers.

3. Use the Fade In and Fade Out Effects Creatively

Besides opening and closing scenes, you can also use the Fade in and fade out effects to mix two different tracks while the shot is still in progress. Fade out one track, make it look like a scene is ending, and then introduce a new theme that changes the mood of that scene. The important thing is to avoid reducing the audio level all the way to -100db because you might end up creating silence in a scene that disrupts the flow of an entire video.

Conclusion

Fading in or fading out audio files in Adobe After Effects doesn’t require much effort, as you have to add a few keyframes to the file and adjust the Audio Level value. However, finding the best way to improve the quality of your soundtrack by applying these effects may take some practice. Do you often add Fade in and fade out audio effects in AE? Leave a comment below and share your experiences with us.

If you want to fade in/out audio easily, we recommend using Filmora . It is designed for people who wish to edit professional videos with simple-to-use features. Besides Fade in/out audio in Filmora, you can automatically sync audio to video. Download it now to have a try (free)!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Many of us get the first association when Adobe After Effects is mentioned: stunning motion graphics and breathtaking visual effects. Very few people think of audio editing when they talk about AE, even though this application offers a simple way to add Fade in and fade out effects to audio files used in soundtracks.

However, you will need to have at least basic video and sound editing skills to fade in and fade out audio files in AE since the app doesn’t offer a preset that you can drag and drop to the timeline. So, in this article, we will show how to create the Fade in and fade out effects in Adobe After Effects in just a few simple steps.

Read More to Get: Best Audio Mixer Software to Trim Your Sound Easily >>

Adding the Fade In and Fade Out Effects to Audio Files in AE

Step 1: Check audio waveform in After Effects

Once you’ve created a new project in AE and you’ve imported the audio files you’d like to include in the soundtrack of the video you’re making, you should place that audio file on the timeline. Click on the arrow located next to the audio file, then click on the Audio arrow that will be displayed under the file, and finally click on the Waveform arrow. This will enable you to see the waveform of the audio file you’d like to edit on the timeline and allow you to add Fade in and fade out effects with more precision. The file you added to your composition will be displayed as a layer in the Composition tab located in the lower-left region of the software’s interface.

Step 2: Add a keyframe to the audio file

The next thing you will have to do is place the playhead at the exact location where you want the Fade In effect to start. In most cases, Fade effects are added at the starting point of the audio file, so you should position the playhead at the beginning of the timeline or zero seconds. You will be able to see a stopwatch next to the Audio Levels option located in the Composition tab. Click on it to add the first keyframe and assign a negative value to the Audio Level setting. -100db or -50db values will make the audio file silent, and you can pick either based on how long you want the Fade in effect to last. If you don’t know how to use keyframes in After Effects, this article will give you some info .

You may also like: 15 Free After Effects Templates to Power up Your Video

Step 3: Complete Fade out/in audio in After Effects

Move the playhead to the location where you want the effect to end and add another keyframe by clicking on the ‘Add or remove keyframe at current time’ icon. Set the Audio Level value to 0db, and that is it. You’ve created the Fade in effect. Keep in mind that you can use more than two keyframes to fade in audio, enabling you to increase the audio level gradually. The process of creating the Fade effect requires you to add a keyframe that has a 0db value a few seconds before the clip ends and then add another keyframe at the very end of the audio file that has -50 or -100db audio level value.

Tips For Making Better Fade In and Fade Out Effects

The process of creating a fade in or a fade out effect in AE is quite simple, but it is up to you to discover creative ways of using these effects. Here are a few tips that can help you use these audio effects more creatively.

1. Avoid Hard Cuts

A high pitch sound at the very begging of a new sequence can ruin your soundtrack and ultimately the entire video, so in case you’ve cut an audio file at the location where the sound peaks, you can apply a fade in effect to make the transition between two audio files softer.

You may also like: How to Cut Video in After Effects

2. Be Mindful of Audio Compression

Audio compression is a process that reduces loud sounds and amplifies quiet sounds, resulting from the audio file’s dynamic range being compressed. In most cases, you won’t notice the effects of audio compression, but if you compress an audio file too much, you might get some unwanted side effects if you add a fade out effect to that file. That’s why it is best to rely on the default audio compression features a video or audio editing app offers.

3. Use the Fade In and Fade Out Effects Creatively

Besides opening and closing scenes, you can also use the Fade in and fade out effects to mix two different tracks while the shot is still in progress. Fade out one track, make it look like a scene is ending, and then introduce a new theme that changes the mood of that scene. The important thing is to avoid reducing the audio level all the way to -100db because you might end up creating silence in a scene that disrupts the flow of an entire video.

Conclusion

Fading in or fading out audio files in Adobe After Effects doesn’t require much effort, as you have to add a few keyframes to the file and adjust the Audio Level value. However, finding the best way to improve the quality of your soundtrack by applying these effects may take some practice. Do you often add Fade in and fade out audio effects in AE? Leave a comment below and share your experiences with us.

If you want to fade in/out audio easily, we recommend using Filmora . It is designed for people who wish to edit professional videos with simple-to-use features. Besides Fade in/out audio in Filmora, you can automatically sync audio to video. Download it now to have a try (free)!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Separate Sounds From Images: IMovie’s Methodology for Mac Computers

How to Separate Audio from Video in iMovie on Mac?

Liza Brown

Oct 26, 2023• Proven solutions

Apple’s video editing program, iMovie, is a popular choice. By removing background noise and raising audio levels of quiet clips, iMovie may likewise modify and enhance the audio of a project.

iMovie gives you the basic, no-frills editing tools you need to make a movie out of a collection of video clips. Without using videotape, you can easily browse from scene to scene and save your edits and changes in digital format. The end product is a high-quality digital video movie that you can save as a QuickTime file or dump back to digital videotape.

Now let’s look at how to separate audio from video in iMovie on Mac.

• Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac
• Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie
• Part 3. FAQs about Separating Audio from Video in iMovie

Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac

The iMovie program is capable of producing high-quality movies and videos. If you’re dealing with a video that includes both sound and pictures, you may want to split the two at some point.

To separate audio from video in iMovie on Mac, just open the video and follow the steps below.

Step 1. Remove the audio clip from the video

In your iMovie timeline, find the clip that contains both video and audio.

Right-click the clip or hold Control and click it. You can also go to the menu bar and choose Detach Audio.

The audio from that clip will then show as its own “clip” in green below the video. The little line on the left, however, confirms that the video and audio are still connected. This implies that if you delete the video, you’ll lose the audio as well. As a result, you’ll either need to move the audio clip somewhere else in your video or place it in the Background Music Well at the bottom of the timeline.

Simply select, drag, and drop the green audio clip where you want it. It will be in the background of all other noises in your movie if you set it in the Background Music Well.

Step 2. Get rid of the video

You can remove the video by clicking it and utilizing one of these techniques after you disconnect the audio and unlink it from the video.

Select Delete from the shortcut menu by right-clicking.

Or hold Control while clicking and selecting Delete.

Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie

Want to extract the music file from a video clip’s audio and visual tracks? Or do you want to add another audio file to the video frame? In this part, you’ll learn how to easily separate audio from video and create your own MP3s with iMovie’s alternative - Wondershare Filmora. It’s a powerful video editing software available on both Mac and Windows.

You can make your own MP3 file of the amazing piece of music for enjoyment on the move, whether it’s from a music video, TV show, or concert footage. To separate your audio from your video, follow the steps outlined below.

Step 1. Import your media files into Filmora

To enter the editing mode, run the software and select the 16:9 or 4:3 ratio that best suits your demands. Then select Import to import video clips, audio, or photographs from your computer’s file folder.

It’s worth noting that this tool is highly compatible with a variety of formats, allowing you to edit them frame by frame while maintaining the original quality. Drag and drop videos onto the timeline after they’ve been imported. All files in the timeline are combined without any gaps by default.

Step 2. Separate the audio and video with a single click

Select “Detach Audio” from the context menu of the video file from which you wish to extract the audio track. You’ll see an audio file appearing on the audio track right away. Yes, this is the source video’s actual audio file.

You’ve successfully detached the audio track from the video file.

Step 3. Save the video or audio that has been split

Because the audio and video tracks have been split, you may simply delete the audio or video track you don’t need and replace it with the new one. Then press “Export” to save the audio track as an MP3 file, or go straight to the “iPod” preset to listen on the move.

You should first save the split video frame or audio track to a project file on your hard disk if you wish to save it separately in a new file. Reload the project file that contains the video frame after you’ve finished exporting the audio track, and then export it to a new video file.

Part 3. FAQs about Separating Audio from Video in iMovie

To learn more about separating audio from video in iMovie, you can check the FAQs below.

1. Is it possible to split audio and video in iMovie?

Yes, you certainly can. Select the video clip you want to separate after you’ve imported it into iMovie. Select “Detach Audio” from the context menu by right-clicking. You can now remove one of the tracks (audio or video), relocate it to a different location in the movie timeline, or alter it.

2. In iMovie, what does “detach audio” do?

The video clip’s audio is deleted, and an audio-only clip (with a green bar) is inserted below the video clip. The audio clip can now be linked to any other clip in your movie, or it can be relocated to the background music section.

3. How can I remove the original audio (from the camera) and lock the new audio to the video so that I don’t have to deal with two different parts (video and audio) when editing?

Make a movie in iMovie that simply mixes all the audio and visuals. You can align the video by listening to it or looking at the waveforms. After it’s all lined up, go into the clip inspector and turn off the video track’s volume. To maintain as much quality as feasible, SHARE/EXPORT using QuickTime and choose Apple Intermediate Codec as your codec. This will link the secondary audio and video tracks together. Now, into an Event, import the movie you just made in iMovie. You may now combine audio and video editing.

4. Is it feasible to simply take the video’s audio and save it as a sound file?

If you have other clips in the timeline, you can detach the audio and copy and paste it around, but if you want all the audio from a clip or set of clips, put them in a project and make a custom QT export and export “Sound to AIFF file”. Drag that into another movie clip or import it as an audio track in iTunes.

5. How do I get the audio from the clip to detach so that I may remove it and record fresh audio over it?

Only in the project timeline, not in the event pane, can you disconnect audio from a clip.

6. In iMovie for Mac, how can I mute a video?

Click the Create New button in iMovie to start a new project. From the resulting dropdown menu, pick Movie. Select the video you wish to mute by clicking the Import Media option. Drag and drop the video onto the timeline once it’s been imported. Right-click on the video in the timeline and choose Detach Audio from the dropdown menu.

The audio and video will be separated or detached as a result of this. Remove the audio from the video that you separated or disconnected in the previous step. The audio file (or layer) is located just beneath the video file on your timeline. Then you can either delete it by right-clicking on it and selecting Delete from the dropdown menu, or by simply clicking on it. It will be highlighted in yellow to indicate that it has been selected. And then press the delete key.

7. How do I view and download a preview?

By clicking the play button next to the Share button, you may see a preview of the video. The video can then be downloaded to your computer by selecting Download Video from the dropdown menu after hitting the Publish button.

Alternatively, you can share it directly from the app to other social media platforms. Apart from removing audio from videos, Animaker also includes other video editing tools that you’ll need to modify your videos for social media and your website.

Wrap Up

As seen in this instructional article, iMovie has countless amazing features as a video editor on Mac . Separating audio from a video is one of those interesting features on iMovie.

If a video has music, sounds, or voices that you’d like to separate from the video, following the above-listed steps is an easy way to do just that. One thing to always remember is to keep the app open while exporting.

And if iMovie can’t meet your need, don’t worry. Wondershare Filmora can be your better choice.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Oct 26, 2023• Proven solutions

Apple’s video editing program, iMovie, is a popular choice. By removing background noise and raising audio levels of quiet clips, iMovie may likewise modify and enhance the audio of a project.

iMovie gives you the basic, no-frills editing tools you need to make a movie out of a collection of video clips. Without using videotape, you can easily browse from scene to scene and save your edits and changes in digital format. The end product is a high-quality digital video movie that you can save as a QuickTime file or dump back to digital videotape.

Now let’s look at how to separate audio from video in iMovie on Mac.

• Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac
• Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie
• Part 3. FAQs about Separating Audio from Video in iMovie

Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac

The iMovie program is capable of producing high-quality movies and videos. If you’re dealing with a video that includes both sound and pictures, you may want to split the two at some point.

To separate audio from video in iMovie on Mac, just open the video and follow the steps below.

Step 1. Remove the audio clip from the video

In your iMovie timeline, find the clip that contains both video and audio.

Right-click the clip or hold Control and click it. You can also go to the menu bar and choose Detach Audio.

The audio from that clip will then show as its own “clip” in green below the video. The little line on the left, however, confirms that the video and audio are still connected. This implies that if you delete the video, you’ll lose the audio as well. As a result, you’ll either need to move the audio clip somewhere else in your video or place it in the Background Music Well at the bottom of the timeline.

Simply select, drag, and drop the green audio clip where you want it. It will be in the background of all other noises in your movie if you set it in the Background Music Well.

Step 2. Get rid of the video

You can remove the video by clicking it and utilizing one of these techniques after you disconnect the audio and unlink it from the video.

Select Delete from the shortcut menu by right-clicking.

Or hold Control while clicking and selecting Delete.

Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie

Want to extract the music file from a video clip’s audio and visual tracks? Or do you want to add another audio file to the video frame? In this part, you’ll learn how to easily separate audio from video and create your own MP3s with iMovie’s alternative - Wondershare Filmora. It’s a powerful video editing software available on both Mac and Windows.

You can make your own MP3 file of the amazing piece of music for enjoyment on the move, whether it’s from a music video, TV show, or concert footage. To separate your audio from your video, follow the steps outlined below.

Step 1. Import your media files into Filmora

To enter the editing mode, run the software and select the 16:9 or 4:3 ratio that best suits your demands. Then select Import to import video clips, audio, or photographs from your computer’s file folder.

It’s worth noting that this tool is highly compatible with a variety of formats, allowing you to edit them frame by frame while maintaining the original quality. Drag and drop videos onto the timeline after they’ve been imported. All files in the timeline are combined without any gaps by default.

Step 2. Separate the audio and video with a single click

Select “Detach Audio” from the context menu of the video file from which you wish to extract the audio track. You’ll see an audio file appearing on the audio track right away. Yes, this is the source video’s actual audio file.

You’ve successfully detached the audio track from the video file.

Step 3. Save the video or audio that has been split

Because the audio and video tracks have been split, you may simply delete the audio or video track you don’t need and replace it with the new one. Then press “Export” to save the audio track as an MP3 file, or go straight to the “iPod” preset to listen on the move.

You should first save the split video frame or audio track to a project file on your hard disk if you wish to save it separately in a new file. Reload the project file that contains the video frame after you’ve finished exporting the audio track, and then export it to a new video file.

Part 3. FAQs about Separating Audio from Video in iMovie

To learn more about separating audio from video in iMovie, you can check the FAQs below.

1. Is it possible to split audio and video in iMovie?

Yes, you certainly can. Select the video clip you want to separate after you’ve imported it into iMovie. Select “Detach Audio” from the context menu by right-clicking. You can now remove one of the tracks (audio or video), relocate it to a different location in the movie timeline, or alter it.

2. In iMovie, what does “detach audio” do?

The video clip’s audio is deleted, and an audio-only clip (with a green bar) is inserted below the video clip. The audio clip can now be linked to any other clip in your movie, or it can be relocated to the background music section.

3. How can I remove the original audio (from the camera) and lock the new audio to the video so that I don’t have to deal with two different parts (video and audio) when editing?

Make a movie in iMovie that simply mixes all the audio and visuals. You can align the video by listening to it or looking at the waveforms. After it’s all lined up, go into the clip inspector and turn off the video track’s volume. To maintain as much quality as feasible, SHARE/EXPORT using QuickTime and choose Apple Intermediate Codec as your codec. This will link the secondary audio and video tracks together. Now, into an Event, import the movie you just made in iMovie. You may now combine audio and video editing.

4. Is it feasible to simply take the video’s audio and save it as a sound file?

If you have other clips in the timeline, you can detach the audio and copy and paste it around, but if you want all the audio from a clip or set of clips, put them in a project and make a custom QT export and export “Sound to AIFF file”. Drag that into another movie clip or import it as an audio track in iTunes.

5. How do I get the audio from the clip to detach so that I may remove it and record fresh audio over it?

Only in the project timeline, not in the event pane, can you disconnect audio from a clip.

6. In iMovie for Mac, how can I mute a video?

Click the Create New button in iMovie to start a new project. From the resulting dropdown menu, pick Movie. Select the video you wish to mute by clicking the Import Media option. Drag and drop the video onto the timeline once it’s been imported. Right-click on the video in the timeline and choose Detach Audio from the dropdown menu.

The audio and video will be separated or detached as a result of this. Remove the audio from the video that you separated or disconnected in the previous step. The audio file (or layer) is located just beneath the video file on your timeline. Then you can either delete it by right-clicking on it and selecting Delete from the dropdown menu, or by simply clicking on it. It will be highlighted in yellow to indicate that it has been selected. And then press the delete key.

7. How do I view and download a preview?

By clicking the play button next to the Share button, you may see a preview of the video. The video can then be downloaded to your computer by selecting Download Video from the dropdown menu after hitting the Publish button.

Alternatively, you can share it directly from the app to other social media platforms. Apart from removing audio from videos, Animaker also includes other video editing tools that you’ll need to modify your videos for social media and your website.

Wrap Up

As seen in this instructional article, iMovie has countless amazing features as a video editor on Mac . Separating audio from a video is one of those interesting features on iMovie.

If a video has music, sounds, or voices that you’d like to separate from the video, following the above-listed steps is an easy way to do just that. One thing to always remember is to keep the app open while exporting.

And if iMovie can’t meet your need, don’t worry. Wondershare Filmora can be your better choice.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Oct 26, 2023• Proven solutions

Apple’s video editing program, iMovie, is a popular choice. By removing background noise and raising audio levels of quiet clips, iMovie may likewise modify and enhance the audio of a project.

iMovie gives you the basic, no-frills editing tools you need to make a movie out of a collection of video clips. Without using videotape, you can easily browse from scene to scene and save your edits and changes in digital format. The end product is a high-quality digital video movie that you can save as a QuickTime file or dump back to digital videotape.

Now let’s look at how to separate audio from video in iMovie on Mac.

• Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac
• Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie
• Part 3. FAQs about Separating Audio from Video in iMovie

Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac

The iMovie program is capable of producing high-quality movies and videos. If you’re dealing with a video that includes both sound and pictures, you may want to split the two at some point.

To separate audio from video in iMovie on Mac, just open the video and follow the steps below.

Step 1. Remove the audio clip from the video

In your iMovie timeline, find the clip that contains both video and audio.

Right-click the clip or hold Control and click it. You can also go to the menu bar and choose Detach Audio.

The audio from that clip will then show as its own “clip” in green below the video. The little line on the left, however, confirms that the video and audio are still connected. This implies that if you delete the video, you’ll lose the audio as well. As a result, you’ll either need to move the audio clip somewhere else in your video or place it in the Background Music Well at the bottom of the timeline.

Simply select, drag, and drop the green audio clip where you want it. It will be in the background of all other noises in your movie if you set it in the Background Music Well.

Step 2. Get rid of the video

You can remove the video by clicking it and utilizing one of these techniques after you disconnect the audio and unlink it from the video.

Select Delete from the shortcut menu by right-clicking.

Or hold Control while clicking and selecting Delete.

Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie

Want to extract the music file from a video clip’s audio and visual tracks? Or do you want to add another audio file to the video frame? In this part, you’ll learn how to easily separate audio from video and create your own MP3s with iMovie’s alternative - Wondershare Filmora. It’s a powerful video editing software available on both Mac and Windows.

You can make your own MP3 file of the amazing piece of music for enjoyment on the move, whether it’s from a music video, TV show, or concert footage. To separate your audio from your video, follow the steps outlined below.

Step 1. Import your media files into Filmora

To enter the editing mode, run the software and select the 16:9 or 4:3 ratio that best suits your demands. Then select Import to import video clips, audio, or photographs from your computer’s file folder.

It’s worth noting that this tool is highly compatible with a variety of formats, allowing you to edit them frame by frame while maintaining the original quality. Drag and drop videos onto the timeline after they’ve been imported. All files in the timeline are combined without any gaps by default.

Step 2. Separate the audio and video with a single click

Select “Detach Audio” from the context menu of the video file from which you wish to extract the audio track. You’ll see an audio file appearing on the audio track right away. Yes, this is the source video’s actual audio file.

You’ve successfully detached the audio track from the video file.

Step 3. Save the video or audio that has been split

Because the audio and video tracks have been split, you may simply delete the audio or video track you don’t need and replace it with the new one. Then press “Export” to save the audio track as an MP3 file, or go straight to the “iPod” preset to listen on the move.

You should first save the split video frame or audio track to a project file on your hard disk if you wish to save it separately in a new file. Reload the project file that contains the video frame after you’ve finished exporting the audio track, and then export it to a new video file.

Part 3. FAQs about Separating Audio from Video in iMovie

To learn more about separating audio from video in iMovie, you can check the FAQs below.

1. Is it possible to split audio and video in iMovie?

Yes, you certainly can. Select the video clip you want to separate after you’ve imported it into iMovie. Select “Detach Audio” from the context menu by right-clicking. You can now remove one of the tracks (audio or video), relocate it to a different location in the movie timeline, or alter it.

2. In iMovie, what does “detach audio” do?

The video clip’s audio is deleted, and an audio-only clip (with a green bar) is inserted below the video clip. The audio clip can now be linked to any other clip in your movie, or it can be relocated to the background music section.

3. How can I remove the original audio (from the camera) and lock the new audio to the video so that I don’t have to deal with two different parts (video and audio) when editing?

Make a movie in iMovie that simply mixes all the audio and visuals. You can align the video by listening to it or looking at the waveforms. After it’s all lined up, go into the clip inspector and turn off the video track’s volume. To maintain as much quality as feasible, SHARE/EXPORT using QuickTime and choose Apple Intermediate Codec as your codec. This will link the secondary audio and video tracks together. Now, into an Event, import the movie you just made in iMovie. You may now combine audio and video editing.

4. Is it feasible to simply take the video’s audio and save it as a sound file?

If you have other clips in the timeline, you can detach the audio and copy and paste it around, but if you want all the audio from a clip or set of clips, put them in a project and make a custom QT export and export “Sound to AIFF file”. Drag that into another movie clip or import it as an audio track in iTunes.

5. How do I get the audio from the clip to detach so that I may remove it and record fresh audio over it?

Only in the project timeline, not in the event pane, can you disconnect audio from a clip.

6. In iMovie for Mac, how can I mute a video?

Click the Create New button in iMovie to start a new project. From the resulting dropdown menu, pick Movie. Select the video you wish to mute by clicking the Import Media option. Drag and drop the video onto the timeline once it’s been imported. Right-click on the video in the timeline and choose Detach Audio from the dropdown menu.

The audio and video will be separated or detached as a result of this. Remove the audio from the video that you separated or disconnected in the previous step. The audio file (or layer) is located just beneath the video file on your timeline. Then you can either delete it by right-clicking on it and selecting Delete from the dropdown menu, or by simply clicking on it. It will be highlighted in yellow to indicate that it has been selected. And then press the delete key.

7. How do I view and download a preview?

By clicking the play button next to the Share button, you may see a preview of the video. The video can then be downloaded to your computer by selecting Download Video from the dropdown menu after hitting the Publish button.

Alternatively, you can share it directly from the app to other social media platforms. Apart from removing audio from videos, Animaker also includes other video editing tools that you’ll need to modify your videos for social media and your website.

Wrap Up

As seen in this instructional article, iMovie has countless amazing features as a video editor on Mac . Separating audio from a video is one of those interesting features on iMovie.

If a video has music, sounds, or voices that you’d like to separate from the video, following the above-listed steps is an easy way to do just that. One thing to always remember is to keep the app open while exporting.

And if iMovie can’t meet your need, don’t worry. Wondershare Filmora can be your better choice.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Oct 26, 2023• Proven solutions

Apple’s video editing program, iMovie, is a popular choice. By removing background noise and raising audio levels of quiet clips, iMovie may likewise modify and enhance the audio of a project.

iMovie gives you the basic, no-frills editing tools you need to make a movie out of a collection of video clips. Without using videotape, you can easily browse from scene to scene and save your edits and changes in digital format. The end product is a high-quality digital video movie that you can save as a QuickTime file or dump back to digital videotape.

Now let’s look at how to separate audio from video in iMovie on Mac.

• Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac
• Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie
• Part 3. FAQs about Separating Audio from Video in iMovie

Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac

The iMovie program is capable of producing high-quality movies and videos. If you’re dealing with a video that includes both sound and pictures, you may want to split the two at some point.

To separate audio from video in iMovie on Mac, just open the video and follow the steps below.

Step 1. Remove the audio clip from the video

In your iMovie timeline, find the clip that contains both video and audio.

Right-click the clip or hold Control and click it. You can also go to the menu bar and choose Detach Audio.

The audio from that clip will then show as its own “clip” in green below the video. The little line on the left, however, confirms that the video and audio are still connected. This implies that if you delete the video, you’ll lose the audio as well. As a result, you’ll either need to move the audio clip somewhere else in your video or place it in the Background Music Well at the bottom of the timeline.

Simply select, drag, and drop the green audio clip where you want it. It will be in the background of all other noises in your movie if you set it in the Background Music Well.

Step 2. Get rid of the video

You can remove the video by clicking it and utilizing one of these techniques after you disconnect the audio and unlink it from the video.

Select Delete from the shortcut menu by right-clicking.

Or hold Control while clicking and selecting Delete.

Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie

Want to extract the music file from a video clip’s audio and visual tracks? Or do you want to add another audio file to the video frame? In this part, you’ll learn how to easily separate audio from video and create your own MP3s with iMovie’s alternative - Wondershare Filmora. It’s a powerful video editing software available on both Mac and Windows.

You can make your own MP3 file of the amazing piece of music for enjoyment on the move, whether it’s from a music video, TV show, or concert footage. To separate your audio from your video, follow the steps outlined below.

Step 1. Import your media files into Filmora

To enter the editing mode, run the software and select the 16:9 or 4:3 ratio that best suits your demands. Then select Import to import video clips, audio, or photographs from your computer’s file folder.

It’s worth noting that this tool is highly compatible with a variety of formats, allowing you to edit them frame by frame while maintaining the original quality. Drag and drop videos onto the timeline after they’ve been imported. All files in the timeline are combined without any gaps by default.

Step 2. Separate the audio and video with a single click

Select “Detach Audio” from the context menu of the video file from which you wish to extract the audio track. You’ll see an audio file appearing on the audio track right away. Yes, this is the source video’s actual audio file.

You’ve successfully detached the audio track from the video file.

Step 3. Save the video or audio that has been split

Because the audio and video tracks have been split, you may simply delete the audio or video track you don’t need and replace it with the new one. Then press “Export” to save the audio track as an MP3 file, or go straight to the “iPod” preset to listen on the move.

You should first save the split video frame or audio track to a project file on your hard disk if you wish to save it separately in a new file. Reload the project file that contains the video frame after you’ve finished exporting the audio track, and then export it to a new video file.

Part 3. FAQs about Separating Audio from Video in iMovie

To learn more about separating audio from video in iMovie, you can check the FAQs below.

1. Is it possible to split audio and video in iMovie?

Yes, you certainly can. Select the video clip you want to separate after you’ve imported it into iMovie. Select “Detach Audio” from the context menu by right-clicking. You can now remove one of the tracks (audio or video), relocate it to a different location in the movie timeline, or alter it.

2. In iMovie, what does “detach audio” do?

The video clip’s audio is deleted, and an audio-only clip (with a green bar) is inserted below the video clip. The audio clip can now be linked to any other clip in your movie, or it can be relocated to the background music section.

3. How can I remove the original audio (from the camera) and lock the new audio to the video so that I don’t have to deal with two different parts (video and audio) when editing?

Make a movie in iMovie that simply mixes all the audio and visuals. You can align the video by listening to it or looking at the waveforms. After it’s all lined up, go into the clip inspector and turn off the video track’s volume. To maintain as much quality as feasible, SHARE/EXPORT using QuickTime and choose Apple Intermediate Codec as your codec. This will link the secondary audio and video tracks together. Now, into an Event, import the movie you just made in iMovie. You may now combine audio and video editing.

4. Is it feasible to simply take the video’s audio and save it as a sound file?

If you have other clips in the timeline, you can detach the audio and copy and paste it around, but if you want all the audio from a clip or set of clips, put them in a project and make a custom QT export and export “Sound to AIFF file”. Drag that into another movie clip or import it as an audio track in iTunes.

5. How do I get the audio from the clip to detach so that I may remove it and record fresh audio over it?

Only in the project timeline, not in the event pane, can you disconnect audio from a clip.

6. In iMovie for Mac, how can I mute a video?

Click the Create New button in iMovie to start a new project. From the resulting dropdown menu, pick Movie. Select the video you wish to mute by clicking the Import Media option. Drag and drop the video onto the timeline once it’s been imported. Right-click on the video in the timeline and choose Detach Audio from the dropdown menu.

The audio and video will be separated or detached as a result of this. Remove the audio from the video that you separated or disconnected in the previous step. The audio file (or layer) is located just beneath the video file on your timeline. Then you can either delete it by right-clicking on it and selecting Delete from the dropdown menu, or by simply clicking on it. It will be highlighted in yellow to indicate that it has been selected. And then press the delete key.

7. How do I view and download a preview?

By clicking the play button next to the Share button, you may see a preview of the video. The video can then be downloaded to your computer by selecting Download Video from the dropdown menu after hitting the Publish button.

Alternatively, you can share it directly from the app to other social media platforms. Apart from removing audio from videos, Animaker also includes other video editing tools that you’ll need to modify your videos for social media and your website.

Wrap Up

As seen in this instructional article, iMovie has countless amazing features as a video editor on Mac . Separating audio from a video is one of those interesting features on iMovie.

If a video has music, sounds, or voices that you’d like to separate from the video, following the above-listed steps is an easy way to do just that. One thing to always remember is to keep the app open while exporting.

And if iMovie can’t meet your need, don’t worry. Wondershare Filmora can be your better choice.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

“Zoom Vocal Personalization: A List of Top 6 Techniques for Humor-Enhanced Public Speaking”

After the outbreak of the Corona Virus (COVID-19), social life was disrupted. Whether it was school or offices, everything was closed as technology has evolved a lot, so all the offices and educational institutes were shifted to online mode. Zoom is the platform that played a vital role and is still being used widely for online work and studies.

These Zoom meetings often get boring, and you lose interest in it. Do you want to enjoy your Zoom meetings? If ‘Yes,’ then this could be done easily by using a Zoom voice changer. Don’t worry if you don’t know much about voice changers for Zoom because you will learn a lot from the article below.

Try AI Voice Changer

For Win 7 or later (64-bit)

Try AI Voice Changer

For macOS 10.12 or later

Part 1. 6 Best Voice Changer for Zoom in 2022

Are you irritated by the same Zoom meetings? If so, then we might have a solution for you. They are software that can help you change your voice for Zoom meetings. The Zoom voice changer makes your daily meetings fun which helps you learn and work better. We have selected top-notch voice-changing software, and a brief description of this software is shared below.

1. VoiceMod

VoiceMod is a real-time voice changer for Zoom, which can help you change the pitch and tone of your voice as you speak. VoiceMod has a pre-loaded range of voices like robot, alien, and sound after-effects that can make your Zoom meetings enjoyable. It has all the impeccable qualities that make it a good voice changer for Zoom. Moreover, VoiceMod easily integrates with different applications.

VoiceMod provides the easiest user interface that even newbies can use easily. Despite having a simple yet attractive interface, the performance is not compromised; it is top quality. VoiceMod has easy on-screen navigation. It installs a virtual audio driver which instantly changes your voice.

Key Features

• VoiceMod offers the user to record and add their voices, but the format for the recording should be WAV or MP3.
• It offers the usage of pre-recorded voices along with sound after effects available in the extensive built-in library.
• VoiceMod has the simplest way for the setup. It takes no more than 5 minutes to set up the modulator on the device being used.

2. AV Voice changer

AV Voice Changer is a great Zoom Voice Changer. It is popular among consumers because of its intuitive interface and impeccable features. It is the best option for Zoom meetings because it integrates with Zoom perfectly.

AV Voice Changer allows the user to alter their voices and make them unrecognizable to the people who know them. It is more of a voice modulator with sound recording and editing capabilities. AV Voice Changer has access to both 32-bit and 64-bit sound qualities.

Key Features

• AV Voice Changer has more than 30 voice effects, of which 17 are non-human. Along with this, 40 plug-in audio effects and 70 background effects are also available.
• The voice changer has a built-in voice recorder and also an editor. These can help you make custom sound effects.
• AV Voice Changer allows the user to change their voice by using multiple parameters and different voice effect combinations.

3. Clownfish

Clownfish is a known and popular voice changer for Zoom. There are multiple kinds of voices offered by the voice changer. The offered voices include Robotic, Atari, baby voices, etc. Using Clownfish as a voice changer for Zoom can make your Zoom meetings fun and interesting. Clownfish is compatible with both 32-bit and 64-bit audio inputs.

Clownfish can cancel and control the background voices that can be heard. The external plugins allow users to produce new sound effects of high quality. Clownfish is open-source software that is compatible with Windows and all kinds of applications.

Key Features

• Clownfish have a unique capability that converts text into voice. The voice can be of your choice chosen from the available pre-sets.
• You can use the voice changer without any endowment as it is installed in the system, which then clears the hesitation of errors.
• Clownfish also offers a built-in audio player along with Virtual Sound Technology (VST), and both are compatible with each other.

4. MorphVOX

MorphVOX is considered a popular voice changer for a Zoom with cool features. It offers both free and paid versions. The non-paid version of MorphVOX has three options for voice changes. It offers ready-to-use voice modulation that is male, female, and child voice. On the contrary, the premium version has a vast range of voices that can be used.

MorphVOX has a retro user interface as compared to current times as it has not been changed since it was launched. It has the capability to record sound in WAV format. MorphVOX also has a background noise filter that is handy for when you are using the devices’ in-built microphone. MorphVOX is a high-quality voice changer software.

Key Features

• MorphVOX perfectly integrates with Zoom. Importantly, it occupies minimal CPU usage as it has low bandwidth.
• Artificial background sounds can be added from the built-in library or can be added by the user to make the Zoom meeting experience better.
• Also, MorphVOX Voice Changer allows the consumer to customize and use mouse and joystick for common functions.

5. Voicemeeter

Voicemeeter is an audio mixing application with a Virtual Audio Device. It is used as Virtual I/O to mix and also manage audios. Voicemeeter can mix audio from different audio sources or different audio devices. Voicemeeter is made for professionals and also for people with little technical knowledge.

Voicemeeter being a Zoom voice changer, is considered as an advanced level of audio mixer. It lets the user adjust the pitch, making a significant difference in one’s voice.

Key Features

• Voicemeeter is free-to-use software available for consumers’ use; along with this, it can customize voices for Zoom.
• It supports various formats, including ASIO, MME, Direct-X, KS, WASAPI, and others.
• Voicemeeter allows a 64-bit version and a 32-bit version of audio quality to its users. Interestingly, it is installed quickly despite providing such facilities.

6. Voxal Voice Changer

Voxal Voice Changer is free software recommended to use as a voice changer for Zoom. It enables the user to modify and alter the pitch of their voices. Voxal Voice Changer has no shortage of sound effects and voice types that can be easily used. It has female voices that can make people fool by thinking that you might be an angel.

Voxal Voice Changer offers to change pre-recorded audios along with real-time voice changing. It has comparatively smooth performance as compared to others. You can upload audio from the device and morph it according to your desire.

Key Features

• Voxal Voice Changer allows you to add echo, reverb, and other after-effects alongside voice-changing facilitations.
• It can automatically configure the settings according to the platform that it is being used on which Zoom meeting is held.
• The user interface is simple yet attractive. It has almost all effect chains available on the main interface for consumer ease.

Closing words

The above-written article gave you the voice changers that will help you make boring Zoom meetings funny. Voice changers for Zoom are the gateway to fun and entertainment. They are the software that changes your voice and makes your Zoom meetings interesting. We shared 6 different and unique voice changers for your help.

Try AI Voice Changer

For Win 7 or later (64-bit)

Try AI Voice Changer

For macOS 10.12 or later

Part 1. 6 Best Voice Changer for Zoom in 2022

Are you irritated by the same Zoom meetings? If so, then we might have a solution for you. They are software that can help you change your voice for Zoom meetings. The Zoom voice changer makes your daily meetings fun which helps you learn and work better. We have selected top-notch voice-changing software, and a brief description of this software is shared below.

1. VoiceMod

VoiceMod is a real-time voice changer for Zoom, which can help you change the pitch and tone of your voice as you speak. VoiceMod has a pre-loaded range of voices like robot, alien, and sound after-effects that can make your Zoom meetings enjoyable. It has all the impeccable qualities that make it a good voice changer for Zoom. Moreover, VoiceMod easily integrates with different applications.

VoiceMod provides the easiest user interface that even newbies can use easily. Despite having a simple yet attractive interface, the performance is not compromised; it is top quality. VoiceMod has easy on-screen navigation. It installs a virtual audio driver which instantly changes your voice.

Key Features

• VoiceMod offers the user to record and add their voices, but the format for the recording should be WAV or MP3.
• It offers the usage of pre-recorded voices along with sound after effects available in the extensive built-in library.
• VoiceMod has the simplest way for the setup. It takes no more than 5 minutes to set up the modulator on the device being used.

2. AV Voice changer

AV Voice Changer is a great Zoom Voice Changer. It is popular among consumers because of its intuitive interface and impeccable features. It is the best option for Zoom meetings because it integrates with Zoom perfectly.

AV Voice Changer allows the user to alter their voices and make them unrecognizable to the people who know them. It is more of a voice modulator with sound recording and editing capabilities. AV Voice Changer has access to both 32-bit and 64-bit sound qualities.

Key Features

• AV Voice Changer has more than 30 voice effects, of which 17 are non-human. Along with this, 40 plug-in audio effects and 70 background effects are also available.
• The voice changer has a built-in voice recorder and also an editor. These can help you make custom sound effects.
• AV Voice Changer allows the user to change their voice by using multiple parameters and different voice effect combinations.

3. Clownfish

Clownfish is a known and popular voice changer for Zoom. There are multiple kinds of voices offered by the voice changer. The offered voices include Robotic, Atari, baby voices, etc. Using Clownfish as a voice changer for Zoom can make your Zoom meetings fun and interesting. Clownfish is compatible with both 32-bit and 64-bit audio inputs.

Clownfish can cancel and control the background voices that can be heard. The external plugins allow users to produce new sound effects of high quality. Clownfish is open-source software that is compatible with Windows and all kinds of applications.

Key Features

• Clownfish have a unique capability that converts text into voice. The voice can be of your choice chosen from the available pre-sets.
• You can use the voice changer without any endowment as it is installed in the system, which then clears the hesitation of errors.
• Clownfish also offers a built-in audio player along with Virtual Sound Technology (VST), and both are compatible with each other.

4. MorphVOX

MorphVOX is considered a popular voice changer for a Zoom with cool features. It offers both free and paid versions. The non-paid version of MorphVOX has three options for voice changes. It offers ready-to-use voice modulation that is male, female, and child voice. On the contrary, the premium version has a vast range of voices that can be used.

MorphVOX has a retro user interface as compared to current times as it has not been changed since it was launched. It has the capability to record sound in WAV format. MorphVOX also has a background noise filter that is handy for when you are using the devices’ in-built microphone. MorphVOX is a high-quality voice changer software.

Key Features

• MorphVOX perfectly integrates with Zoom. Importantly, it occupies minimal CPU usage as it has low bandwidth.
• Artificial background sounds can be added from the built-in library or can be added by the user to make the Zoom meeting experience better.
• Also, MorphVOX Voice Changer allows the consumer to customize and use mouse and joystick for common functions.

5. Voicemeeter

Voicemeeter is an audio mixing application with a Virtual Audio Device. It is used as Virtual I/O to mix and also manage audios. Voicemeeter can mix audio from different audio sources or different audio devices. Voicemeeter is made for professionals and also for people with little technical knowledge.

Voicemeeter being a Zoom voice changer, is considered as an advanced level of audio mixer. It lets the user adjust the pitch, making a significant difference in one’s voice.

Key Features

• Voicemeeter is free-to-use software available for consumers’ use; along with this, it can customize voices for Zoom.
• It supports various formats, including ASIO, MME, Direct-X, KS, WASAPI, and others.
• Voicemeeter allows a 64-bit version and a 32-bit version of audio quality to its users. Interestingly, it is installed quickly despite providing such facilities.

6. Voxal Voice Changer

Voxal Voice Changer is free software recommended to use as a voice changer for Zoom. It enables the user to modify and alter the pitch of their voices. Voxal Voice Changer has no shortage of sound effects and voice types that can be easily used. It has female voices that can make people fool by thinking that you might be an angel.

Voxal Voice Changer offers to change pre-recorded audios along with real-time voice changing. It has comparatively smooth performance as compared to others. You can upload audio from the device and morph it according to your desire.

Key Features

• Voxal Voice Changer allows you to add echo, reverb, and other after-effects alongside voice-changing facilitations.
• It can automatically configure the settings according to the platform that it is being used on which Zoom meeting is held.
• The user interface is simple yet attractive. It has almost all effect chains available on the main interface for consumer ease.

Closing words

The above-written article gave you the voice changers that will help you make boring Zoom meetings funny. Voice changers for Zoom are the gateway to fun and entertainment. They are the software that changes your voice and makes your Zoom meetings interesting. We shared 6 different and unique voice changers for your help.

Try AI Voice Changer

For Win 7 or later (64-bit)

Try AI Voice Changer

For macOS 10.12 or later

Part 1. 6 Best Voice Changer for Zoom in 2022

Are you irritated by the same Zoom meetings? If so, then we might have a solution for you. They are software that can help you change your voice for Zoom meetings. The Zoom voice changer makes your daily meetings fun which helps you learn and work better. We have selected top-notch voice-changing software, and a brief description of this software is shared below.

1. VoiceMod

VoiceMod is a real-time voice changer for Zoom, which can help you change the pitch and tone of your voice as you speak. VoiceMod has a pre-loaded range of voices like robot, alien, and sound after-effects that can make your Zoom meetings enjoyable. It has all the impeccable qualities that make it a good voice changer for Zoom. Moreover, VoiceMod easily integrates with different applications.

VoiceMod provides the easiest user interface that even newbies can use easily. Despite having a simple yet attractive interface, the performance is not compromised; it is top quality. VoiceMod has easy on-screen navigation. It installs a virtual audio driver which instantly changes your voice.

Key Features

• VoiceMod offers the user to record and add their voices, but the format for the recording should be WAV or MP3.
• It offers the usage of pre-recorded voices along with sound after effects available in the extensive built-in library.
• VoiceMod has the simplest way for the setup. It takes no more than 5 minutes to set up the modulator on the device being used.

2. AV Voice changer

AV Voice Changer is a great Zoom Voice Changer. It is popular among consumers because of its intuitive interface and impeccable features. It is the best option for Zoom meetings because it integrates with Zoom perfectly.

AV Voice Changer allows the user to alter their voices and make them unrecognizable to the people who know them. It is more of a voice modulator with sound recording and editing capabilities. AV Voice Changer has access to both 32-bit and 64-bit sound qualities.

Key Features

• AV Voice Changer has more than 30 voice effects, of which 17 are non-human. Along with this, 40 plug-in audio effects and 70 background effects are also available.
• The voice changer has a built-in voice recorder and also an editor. These can help you make custom sound effects.
• AV Voice Changer allows the user to change their voice by using multiple parameters and different voice effect combinations.

3. Clownfish

Clownfish is a known and popular voice changer for Zoom. There are multiple kinds of voices offered by the voice changer. The offered voices include Robotic, Atari, baby voices, etc. Using Clownfish as a voice changer for Zoom can make your Zoom meetings fun and interesting. Clownfish is compatible with both 32-bit and 64-bit audio inputs.

Clownfish can cancel and control the background voices that can be heard. The external plugins allow users to produce new sound effects of high quality. Clownfish is open-source software that is compatible with Windows and all kinds of applications.

Key Features

• Clownfish have a unique capability that converts text into voice. The voice can be of your choice chosen from the available pre-sets.
• You can use the voice changer without any endowment as it is installed in the system, which then clears the hesitation of errors.
• Clownfish also offers a built-in audio player along with Virtual Sound Technology (VST), and both are compatible with each other.

4. MorphVOX

MorphVOX is considered a popular voice changer for a Zoom with cool features. It offers both free and paid versions. The non-paid version of MorphVOX has three options for voice changes. It offers ready-to-use voice modulation that is male, female, and child voice. On the contrary, the premium version has a vast range of voices that can be used.

MorphVOX has a retro user interface as compared to current times as it has not been changed since it was launched. It has the capability to record sound in WAV format. MorphVOX also has a background noise filter that is handy for when you are using the devices’ in-built microphone. MorphVOX is a high-quality voice changer software.

Key Features

• MorphVOX perfectly integrates with Zoom. Importantly, it occupies minimal CPU usage as it has low bandwidth.
• Artificial background sounds can be added from the built-in library or can be added by the user to make the Zoom meeting experience better.
• Also, MorphVOX Voice Changer allows the consumer to customize and use mouse and joystick for common functions.

5. Voicemeeter

Voicemeeter is an audio mixing application with a Virtual Audio Device. It is used as Virtual I/O to mix and also manage audios. Voicemeeter can mix audio from different audio sources or different audio devices. Voicemeeter is made for professionals and also for people with little technical knowledge.

Voicemeeter being a Zoom voice changer, is considered as an advanced level of audio mixer. It lets the user adjust the pitch, making a significant difference in one’s voice.

Key Features

• Voicemeeter is free-to-use software available for consumers’ use; along with this, it can customize voices for Zoom.
• It supports various formats, including ASIO, MME, Direct-X, KS, WASAPI, and others.
• Voicemeeter allows a 64-bit version and a 32-bit version of audio quality to its users. Interestingly, it is installed quickly despite providing such facilities.

6. Voxal Voice Changer

Voxal Voice Changer is free software recommended to use as a voice changer for Zoom. It enables the user to modify and alter the pitch of their voices. Voxal Voice Changer has no shortage of sound effects and voice types that can be easily used. It has female voices that can make people fool by thinking that you might be an angel.

Voxal Voice Changer offers to change pre-recorded audios along with real-time voice changing. It has comparatively smooth performance as compared to others. You can upload audio from the device and morph it according to your desire.

Key Features

• Voxal Voice Changer allows you to add echo, reverb, and other after-effects alongside voice-changing facilitations.
• It can automatically configure the settings according to the platform that it is being used on which Zoom meeting is held.
• The user interface is simple yet attractive. It has almost all effect chains available on the main interface for consumer ease.

Closing words

The above-written article gave you the voice changers that will help you make boring Zoom meetings funny. Voice changers for Zoom are the gateway to fun and entertainment. They are the software that changes your voice and makes your Zoom meetings interesting. We shared 6 different and unique voice changers for your help.

Try AI Voice Changer

For Win 7 or later (64-bit)

Try AI Voice Changer

For macOS 10.12 or later

Part 1. 6 Best Voice Changer for Zoom in 2022

Are you irritated by the same Zoom meetings? If so, then we might have a solution for you. They are software that can help you change your voice for Zoom meetings. The Zoom voice changer makes your daily meetings fun which helps you learn and work better. We have selected top-notch voice-changing software, and a brief description of this software is shared below.

1. VoiceMod

VoiceMod is a real-time voice changer for Zoom, which can help you change the pitch and tone of your voice as you speak. VoiceMod has a pre-loaded range of voices like robot, alien, and sound after-effects that can make your Zoom meetings enjoyable. It has all the impeccable qualities that make it a good voice changer for Zoom. Moreover, VoiceMod easily integrates with different applications.

VoiceMod provides the easiest user interface that even newbies can use easily. Despite having a simple yet attractive interface, the performance is not compromised; it is top quality. VoiceMod has easy on-screen navigation. It installs a virtual audio driver which instantly changes your voice.

Key Features

• VoiceMod offers the user to record and add their voices, but the format for the recording should be WAV or MP3.
• It offers the usage of pre-recorded voices along with sound after effects available in the extensive built-in library.
• VoiceMod has the simplest way for the setup. It takes no more than 5 minutes to set up the modulator on the device being used.

2. AV Voice changer

AV Voice Changer is a great Zoom Voice Changer. It is popular among consumers because of its intuitive interface and impeccable features. It is the best option for Zoom meetings because it integrates with Zoom perfectly.

AV Voice Changer allows the user to alter their voices and make them unrecognizable to the people who know them. It is more of a voice modulator with sound recording and editing capabilities. AV Voice Changer has access to both 32-bit and 64-bit sound qualities.

Key Features

• AV Voice Changer has more than 30 voice effects, of which 17 are non-human. Along with this, 40 plug-in audio effects and 70 background effects are also available.
• The voice changer has a built-in voice recorder and also an editor. These can help you make custom sound effects.
• AV Voice Changer allows the user to change their voice by using multiple parameters and different voice effect combinations.

3. Clownfish

Clownfish is a known and popular voice changer for Zoom. There are multiple kinds of voices offered by the voice changer. The offered voices include Robotic, Atari, baby voices, etc. Using Clownfish as a voice changer for Zoom can make your Zoom meetings fun and interesting. Clownfish is compatible with both 32-bit and 64-bit audio inputs.

Clownfish can cancel and control the background voices that can be heard. The external plugins allow users to produce new sound effects of high quality. Clownfish is open-source software that is compatible with Windows and all kinds of applications.

Key Features

• Clownfish have a unique capability that converts text into voice. The voice can be of your choice chosen from the available pre-sets.
• You can use the voice changer without any endowment as it is installed in the system, which then clears the hesitation of errors.
• Clownfish also offers a built-in audio player along with Virtual Sound Technology (VST), and both are compatible with each other.

4. MorphVOX

MorphVOX is considered a popular voice changer for a Zoom with cool features. It offers both free and paid versions. The non-paid version of MorphVOX has three options for voice changes. It offers ready-to-use voice modulation that is male, female, and child voice. On the contrary, the premium version has a vast range of voices that can be used.

MorphVOX has a retro user interface as compared to current times as it has not been changed since it was launched. It has the capability to record sound in WAV format. MorphVOX also has a background noise filter that is handy for when you are using the devices’ in-built microphone. MorphVOX is a high-quality voice changer software.

Key Features

• MorphVOX perfectly integrates with Zoom. Importantly, it occupies minimal CPU usage as it has low bandwidth.
• Artificial background sounds can be added from the built-in library or can be added by the user to make the Zoom meeting experience better.
• Also, MorphVOX Voice Changer allows the consumer to customize and use mouse and joystick for common functions.

5. Voicemeeter

Voicemeeter is an audio mixing application with a Virtual Audio Device. It is used as Virtual I/O to mix and also manage audios. Voicemeeter can mix audio from different audio sources or different audio devices. Voicemeeter is made for professionals and also for people with little technical knowledge.

Voicemeeter being a Zoom voice changer, is considered as an advanced level of audio mixer. It lets the user adjust the pitch, making a significant difference in one’s voice.

Key Features

• Voicemeeter is free-to-use software available for consumers’ use; along with this, it can customize voices for Zoom.
• It supports various formats, including ASIO, MME, Direct-X, KS, WASAPI, and others.
• Voicemeeter allows a 64-bit version and a 32-bit version of audio quality to its users. Interestingly, it is installed quickly despite providing such facilities.

6. Voxal Voice Changer

Voxal Voice Changer is free software recommended to use as a voice changer for Zoom. It enables the user to modify and alter the pitch of their voices. Voxal Voice Changer has no shortage of sound effects and voice types that can be easily used. It has female voices that can make people fool by thinking that you might be an angel.

Voxal Voice Changer offers to change pre-recorded audios along with real-time voice changing. It has comparatively smooth performance as compared to others. You can upload audio from the device and morph it according to your desire.

Key Features

• Voxal Voice Changer allows you to add echo, reverb, and other after-effects alongside voice-changing facilitations.
• It can automatically configure the settings according to the platform that it is being used on which Zoom meeting is held.
• The user interface is simple yet attractive. It has almost all effect chains available on the main interface for consumer ease.

Closing words

The above-written article gave you the voice changers that will help you make boring Zoom meetings funny. Voice changers for Zoom are the gateway to fun and entertainment. They are the software that changes your voice and makes your Zoom meetings interesting. We shared 6 different and unique voice changers for your help.

Also read: