The Premier Selection of Zero-Cost Sound Balancers

When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!

So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.

With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.

Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.

As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!

So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.

Wondershare Filmora X

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

The Premier List of Windows-Compatible Automatic Speech Recognition Systems

Recently, technology has increased exponentially, and people are always on the computer, writing, or doing other tasks. People get tired of typing documents or clicking while playing a game at certain times. Or, some people are just too slow at typing to get any work done on time. This is where the speech to text software comes in.

Thanks to the advancements in technology, a speech to text software can be used to transcribe or convert audio to text. There is a multitude of such tools available online or as downloadable software.

Let us discuss some of the best tools to convert audio to text.

Top Recommendation: Wondershare Filmora

Wondershare Filmora Speech to Text is quite different with other STT service providers. Other STT platforms/stages require you to use the application to convert speech-to-text, save, and export into other third-party software. However, Wondershare Filmora allows you to directly convert your speech-to-text on an ongoing production. For example, you can convert speech into subtitles during a video production on Wondershare Filmora.

What’s more, now Filmora’s STT feature supports direct transcription of bilingual subtitles with up to 27 languages of transcription in Filmora version 13.

Top Adavantages of Filmora:

• 1. Support direct transcription of bilingual subtitles.
• 2. Allow to transcribe video speech to text in one click.
• 3. Boost editing efficiency by applying the STT feature.

Best STT Software for Windows

Save plenty of time on transcribing subtitles and boost your editing efficiency by applying Filmora Speech-To-Text.

Try STT Now Try STT Now Try STT Now

Best 10 Speech to Text Software for Windows

As every speech to text converter comes with a different set of key features and sometimes drawbacks, it is wise to review a few and choose the one that seems most suitable. Here is a list of the top 10 speech to text converters.

• 1. Windows Dictation
• 2. Window’s Speech Recognition
• 3. Dragon Professional Individual
• 4. Google Docs Voice Typing
• 5. NaturalReader
• 6. Braina Pro
• 7. Speechnotes
• 8. Sobolsoft
• 9. Bear File Converter
• 10. Voice Finger

1. Windows Dictation

Price: Free

Using the in-built Speech Recognition, Windows dictation easily converts everything you speak into text. It is super easy to use, and there are a variety of commands that can be used to control the text and write without accessing the keyboard and with stunning accuracy. To initiate this speech to text software, press **Windows icon+**H and enable the settings’ online speech recognition toggle. A toolbar will appear with a microphone icon. Say Start Dictating and click on the microphone to convert audio to text. By saying Stop Dictating, you can finish the process. However, you will need to have an active internet connection to use this dictator.

2. Window’s Speech Recognition (WSR)

Price: Free

Windows users can enjoy this voice-to-text software already built-in in the system and needs a quick and straightforward activation method to start. Through Window’s Speech Recognition software, users can convert audio to text on various programs, browsers, or applications. This can be used to open or close programs, set calendars, or even search and start a song. To activate, enter Windows Speech Recognition in the search bar. Go through the steps to help your computer recognize your voice, and you’re good to go.

3. Dragon Professional Individual

Price: $500 for professional and enterprise version/$49.99 for the basic version

As the name suggests, this speech to text software is a highly professional tool to make a writer’s life easier. It has loads of editing commands and 160 words per minute typing speed. It offers almost 99% accuracy and works on various programs as well as on the browser. After installation, you can easily activate and convert audio to text. Pre-recorded audios containing a single speaker can also be quickly transcribed through this tool.

4. Google Docs Voice Typing

Price: Free

The Google speech to text software is in-built in the Google Docs available on the browser. With this free and remarkable tool, you can work faster without having to type in anything. It has around 100 voice commands that help you make edits and formatting. Whether you want to enter bullet points, change lines, or underline a word, this voice to text software by Google is an excellent choice. It is available on the web, but it cannot be downloaded. To use this, hop onto Google Docs and click on Tools, tap on Voice Typing. Then, allow microphone use and start speaking.

5. NaturalReader

Price: Personal:$99.50(one-time payment)

NaturalReader is the kind of speech to text software that can read or narrate a variety of text and multiple document formats so that users do not have to strain their eyes. It helps to convert text into audio files such as MP3. You can even change the pronunciation of a word as you like. NaturalReader offers an online version, as well as a downloadable edition. A free version is also available, but with limited features.

6. Braina Pro

Price: $169/lifetime(limited time offer) or $59/annually

Braina Pro is not just a speech to text converter; rather, it works as a complete virtual assistant. It can set alarms, open or close files, or complete a multitude of tasks on your computer. This software also boasts a mobile app that can be used to control your PC without having to access it physically. Braina Pro supports more than 90 languages. But, you will need an active internet connection to do so. Just subscribe and download the app, open it and click on the microphone icon. Click and say ‘Enter dictation mode‘ and start using it.

7. Speechnotes

Price: Free

A very efficient and powerful speech to text converter is the Speechnotes tool. It is easily accessible as there is no need to download, register, or subscribe. By opening the Speechnotes online link on Chrome, you can click on the microphone icon and start dictating to convert audio to text. There are numerous, frequently used commands and shortcuts displayed on the left side of the screen. What’s more, Speechnotes automatically capitalizes sentence starters and autosaves documents. After completion, the text can be directly saved to the local files or exported to Google Drive.

8. Sobolsoft

Price: Free(500 minutes/month)

With Sobolsoft, you can easily and seamlessly convert audio to text files and save them. The free version allows 500 mins of audio conversion every month. After installation, you can upload the audio files and click on convert to start the process. Also, multiple audio files can be uploaded and converted to text simultaneously. After transcription, the text can be edited and saved. However, only MP3 files can be converted through this speech to text software.

9. Bear File Converter

Price: Free

Bear File Converter is a comprehensive tool that offers a variety of services, including the speech to text converter. It is available online for free use. You can upload audio files that are no more than 3 megabytes in size and click on convert. This speech-to-text software supports the audio file formats supported by this speech to text software are MP3, OGG, WAV, WMA, and many more. You can also add audio files URL. Just click convert to start the process. The files are saved to the device in a word file.

10. Voice Finger

Price: $9.99

Voice Finger is an extremely powerful yet easy-to-use speech to text software that makes all kinds of computer tasks easier. With this tool, you can enjoy hands-free gaming or complete tasks without even touching the mouse. All clicks and holding special keys is also easily done by Voice Finger. This voice to text software is the ultimate solution for gamers or those with extensive writing tasks as it makes everything effortless. Whether you want to move the cursor, type documents, or click to shoot in a game, Voice Finger has got you covered. Just download the software and start using it. A free version is also available.

Conclusion

Before you go on to subscribe or purchase a random speech to text software, it is advisable to weigh out a few suitable options and then choose the one that best fits your needs. If you want to use the voice to text software while you are on the go and don’t have access to an internet connection, remember to check whether it works offline or not.

You can read our rendition of the quick review on the top speech to text software tools that can help save time and effort while maximizing productivity.

KwiCut

Transform Long Videos into Short Ones Instantly

Turn long videos into viral clips. Effortlessly transform lengthy videos into engaging, shareable clips.

Get Started Now

Download For Free

Best STT Software for Windows

Save plenty of time on transcribing subtitles and boost your editing efficiency by applying Filmora Speech-To-Text.

Try STT Now Try STT Now Try STT Now

Best 10 Speech to Text Software for Windows

As every speech to text converter comes with a different set of key features and sometimes drawbacks, it is wise to review a few and choose the one that seems most suitable. Here is a list of the top 10 speech to text converters.

• 1. Windows Dictation
• 2. Window’s Speech Recognition
• 3. Dragon Professional Individual
• 4. Google Docs Voice Typing
• 5. NaturalReader
• 6. Braina Pro
• 7. Speechnotes
• 8. Sobolsoft
• 9. Bear File Converter
• 10. Voice Finger

1. Windows Dictation

Price: Free

Using the in-built Speech Recognition, Windows dictation easily converts everything you speak into text. It is super easy to use, and there are a variety of commands that can be used to control the text and write without accessing the keyboard and with stunning accuracy. To initiate this speech to text software, press **Windows icon+**H and enable the settings’ online speech recognition toggle. A toolbar will appear with a microphone icon. Say Start Dictating and click on the microphone to convert audio to text. By saying Stop Dictating, you can finish the process. However, you will need to have an active internet connection to use this dictator.

2. Window’s Speech Recognition (WSR)

Price: Free

Windows users can enjoy this voice-to-text software already built-in in the system and needs a quick and straightforward activation method to start. Through Window’s Speech Recognition software, users can convert audio to text on various programs, browsers, or applications. This can be used to open or close programs, set calendars, or even search and start a song. To activate, enter Windows Speech Recognition in the search bar. Go through the steps to help your computer recognize your voice, and you’re good to go.

3. Dragon Professional Individual

Price: $500 for professional and enterprise version/$49.99 for the basic version

As the name suggests, this speech to text software is a highly professional tool to make a writer’s life easier. It has loads of editing commands and 160 words per minute typing speed. It offers almost 99% accuracy and works on various programs as well as on the browser. After installation, you can easily activate and convert audio to text. Pre-recorded audios containing a single speaker can also be quickly transcribed through this tool.

4. Google Docs Voice Typing

Price: Free

The Google speech to text software is in-built in the Google Docs available on the browser. With this free and remarkable tool, you can work faster without having to type in anything. It has around 100 voice commands that help you make edits and formatting. Whether you want to enter bullet points, change lines, or underline a word, this voice to text software by Google is an excellent choice. It is available on the web, but it cannot be downloaded. To use this, hop onto Google Docs and click on Tools, tap on Voice Typing. Then, allow microphone use and start speaking.

5. NaturalReader

Price: Personal:$99.50(one-time payment)

NaturalReader is the kind of speech to text software that can read or narrate a variety of text and multiple document formats so that users do not have to strain their eyes. It helps to convert text into audio files such as MP3. You can even change the pronunciation of a word as you like. NaturalReader offers an online version, as well as a downloadable edition. A free version is also available, but with limited features.

6. Braina Pro

Price: $169/lifetime(limited time offer) or $59/annually

Braina Pro is not just a speech to text converter; rather, it works as a complete virtual assistant. It can set alarms, open or close files, or complete a multitude of tasks on your computer. This software also boasts a mobile app that can be used to control your PC without having to access it physically. Braina Pro supports more than 90 languages. But, you will need an active internet connection to do so. Just subscribe and download the app, open it and click on the microphone icon. Click and say ‘Enter dictation mode‘ and start using it.

7. Speechnotes

Price: Free

A very efficient and powerful speech to text converter is the Speechnotes tool. It is easily accessible as there is no need to download, register, or subscribe. By opening the Speechnotes online link on Chrome, you can click on the microphone icon and start dictating to convert audio to text. There are numerous, frequently used commands and shortcuts displayed on the left side of the screen. What’s more, Speechnotes automatically capitalizes sentence starters and autosaves documents. After completion, the text can be directly saved to the local files or exported to Google Drive.

8. Sobolsoft

Price: Free(500 minutes/month)

With Sobolsoft, you can easily and seamlessly convert audio to text files and save them. The free version allows 500 mins of audio conversion every month. After installation, you can upload the audio files and click on convert to start the process. Also, multiple audio files can be uploaded and converted to text simultaneously. After transcription, the text can be edited and saved. However, only MP3 files can be converted through this speech to text software.

9. Bear File Converter

Price: Free

Bear File Converter is a comprehensive tool that offers a variety of services, including the speech to text converter. It is available online for free use. You can upload audio files that are no more than 3 megabytes in size and click on convert. This speech-to-text software supports the audio file formats supported by this speech to text software are MP3, OGG, WAV, WMA, and many more. You can also add audio files URL. Just click convert to start the process. The files are saved to the device in a word file.

10. Voice Finger

Price: $9.99

Voice Finger is an extremely powerful yet easy-to-use speech to text software that makes all kinds of computer tasks easier. With this tool, you can enjoy hands-free gaming or complete tasks without even touching the mouse. All clicks and holding special keys is also easily done by Voice Finger. This voice to text software is the ultimate solution for gamers or those with extensive writing tasks as it makes everything effortless. Whether you want to move the cursor, type documents, or click to shoot in a game, Voice Finger has got you covered. Just download the software and start using it. A free version is also available.

Conclusion

Before you go on to subscribe or purchase a random speech to text software, it is advisable to weigh out a few suitable options and then choose the one that best fits your needs. If you want to use the voice to text software while you are on the go and don’t have access to an internet connection, remember to check whether it works offline or not.

You can read our rendition of the quick review on the top speech to text software tools that can help save time and effort while maximizing productivity.

KwiCut

Transform Long Videos into Short Ones Instantly

Turn long videos into viral clips. Effortlessly transform lengthy videos into engaging, shareable clips.

Get Started Now

Download For Free

Best STT Software for Windows

Save plenty of time on transcribing subtitles and boost your editing efficiency by applying Filmora Speech-To-Text.

Try STT Now Try STT Now Try STT Now

Best 10 Speech to Text Software for Windows

As every speech to text converter comes with a different set of key features and sometimes drawbacks, it is wise to review a few and choose the one that seems most suitable. Here is a list of the top 10 speech to text converters.

• 1. Windows Dictation
• 2. Window’s Speech Recognition
• 3. Dragon Professional Individual
• 4. Google Docs Voice Typing
• 5. NaturalReader
• 6. Braina Pro
• 7. Speechnotes
• 8. Sobolsoft
• 9. Bear File Converter
• 10. Voice Finger

1. Windows Dictation

Price: Free

Using the in-built Speech Recognition, Windows dictation easily converts everything you speak into text. It is super easy to use, and there are a variety of commands that can be used to control the text and write without accessing the keyboard and with stunning accuracy. To initiate this speech to text software, press **Windows icon+**H and enable the settings’ online speech recognition toggle. A toolbar will appear with a microphone icon. Say Start Dictating and click on the microphone to convert audio to text. By saying Stop Dictating, you can finish the process. However, you will need to have an active internet connection to use this dictator.

2. Window’s Speech Recognition (WSR)

Price: Free

Windows users can enjoy this voice-to-text software already built-in in the system and needs a quick and straightforward activation method to start. Through Window’s Speech Recognition software, users can convert audio to text on various programs, browsers, or applications. This can be used to open or close programs, set calendars, or even search and start a song. To activate, enter Windows Speech Recognition in the search bar. Go through the steps to help your computer recognize your voice, and you’re good to go.

3. Dragon Professional Individual

Price: $500 for professional and enterprise version/$49.99 for the basic version

As the name suggests, this speech to text software is a highly professional tool to make a writer’s life easier. It has loads of editing commands and 160 words per minute typing speed. It offers almost 99% accuracy and works on various programs as well as on the browser. After installation, you can easily activate and convert audio to text. Pre-recorded audios containing a single speaker can also be quickly transcribed through this tool.

4. Google Docs Voice Typing

Price: Free

The Google speech to text software is in-built in the Google Docs available on the browser. With this free and remarkable tool, you can work faster without having to type in anything. It has around 100 voice commands that help you make edits and formatting. Whether you want to enter bullet points, change lines, or underline a word, this voice to text software by Google is an excellent choice. It is available on the web, but it cannot be downloaded. To use this, hop onto Google Docs and click on Tools, tap on Voice Typing. Then, allow microphone use and start speaking.

5. NaturalReader

Price: Personal:$99.50(one-time payment)

NaturalReader is the kind of speech to text software that can read or narrate a variety of text and multiple document formats so that users do not have to strain their eyes. It helps to convert text into audio files such as MP3. You can even change the pronunciation of a word as you like. NaturalReader offers an online version, as well as a downloadable edition. A free version is also available, but with limited features.

6. Braina Pro

Price: $169/lifetime(limited time offer) or $59/annually

Braina Pro is not just a speech to text converter; rather, it works as a complete virtual assistant. It can set alarms, open or close files, or complete a multitude of tasks on your computer. This software also boasts a mobile app that can be used to control your PC without having to access it physically. Braina Pro supports more than 90 languages. But, you will need an active internet connection to do so. Just subscribe and download the app, open it and click on the microphone icon. Click and say ‘Enter dictation mode‘ and start using it.

7. Speechnotes

Price: Free

A very efficient and powerful speech to text converter is the Speechnotes tool. It is easily accessible as there is no need to download, register, or subscribe. By opening the Speechnotes online link on Chrome, you can click on the microphone icon and start dictating to convert audio to text. There are numerous, frequently used commands and shortcuts displayed on the left side of the screen. What’s more, Speechnotes automatically capitalizes sentence starters and autosaves documents. After completion, the text can be directly saved to the local files or exported to Google Drive.

8. Sobolsoft

Price: Free(500 minutes/month)

With Sobolsoft, you can easily and seamlessly convert audio to text files and save them. The free version allows 500 mins of audio conversion every month. After installation, you can upload the audio files and click on convert to start the process. Also, multiple audio files can be uploaded and converted to text simultaneously. After transcription, the text can be edited and saved. However, only MP3 files can be converted through this speech to text software.

9. Bear File Converter

Price: Free

Bear File Converter is a comprehensive tool that offers a variety of services, including the speech to text converter. It is available online for free use. You can upload audio files that are no more than 3 megabytes in size and click on convert. This speech-to-text software supports the audio file formats supported by this speech to text software are MP3, OGG, WAV, WMA, and many more. You can also add audio files URL. Just click convert to start the process. The files are saved to the device in a word file.

10. Voice Finger

Price: $9.99

Voice Finger is an extremely powerful yet easy-to-use speech to text software that makes all kinds of computer tasks easier. With this tool, you can enjoy hands-free gaming or complete tasks without even touching the mouse. All clicks and holding special keys is also easily done by Voice Finger. This voice to text software is the ultimate solution for gamers or those with extensive writing tasks as it makes everything effortless. Whether you want to move the cursor, type documents, or click to shoot in a game, Voice Finger has got you covered. Just download the software and start using it. A free version is also available.

Conclusion

Before you go on to subscribe or purchase a random speech to text software, it is advisable to weigh out a few suitable options and then choose the one that best fits your needs. If you want to use the voice to text software while you are on the go and don’t have access to an internet connection, remember to check whether it works offline or not.

You can read our rendition of the quick review on the top speech to text software tools that can help save time and effort while maximizing productivity.

KwiCut

Transform Long Videos into Short Ones Instantly

Turn long videos into viral clips. Effortlessly transform lengthy videos into engaging, shareable clips.

Get Started Now

Download For Free

Best STT Software for Windows

Save plenty of time on transcribing subtitles and boost your editing efficiency by applying Filmora Speech-To-Text.

Try STT Now Try STT Now Try STT Now

Best 10 Speech to Text Software for Windows

As every speech to text converter comes with a different set of key features and sometimes drawbacks, it is wise to review a few and choose the one that seems most suitable. Here is a list of the top 10 speech to text converters.

• 1. Windows Dictation
• 2. Window’s Speech Recognition
• 3. Dragon Professional Individual
• 4. Google Docs Voice Typing
• 5. NaturalReader
• 6. Braina Pro
• 7. Speechnotes
• 8. Sobolsoft
• 9. Bear File Converter
• 10. Voice Finger

1. Windows Dictation

Price: Free

Using the in-built Speech Recognition, Windows dictation easily converts everything you speak into text. It is super easy to use, and there are a variety of commands that can be used to control the text and write without accessing the keyboard and with stunning accuracy. To initiate this speech to text software, press **Windows icon+**H and enable the settings’ online speech recognition toggle. A toolbar will appear with a microphone icon. Say Start Dictating and click on the microphone to convert audio to text. By saying Stop Dictating, you can finish the process. However, you will need to have an active internet connection to use this dictator.

2. Window’s Speech Recognition (WSR)

Price: Free

Windows users can enjoy this voice-to-text software already built-in in the system and needs a quick and straightforward activation method to start. Through Window’s Speech Recognition software, users can convert audio to text on various programs, browsers, or applications. This can be used to open or close programs, set calendars, or even search and start a song. To activate, enter Windows Speech Recognition in the search bar. Go through the steps to help your computer recognize your voice, and you’re good to go.

3. Dragon Professional Individual

Price: $500 for professional and enterprise version/$49.99 for the basic version

As the name suggests, this speech to text software is a highly professional tool to make a writer’s life easier. It has loads of editing commands and 160 words per minute typing speed. It offers almost 99% accuracy and works on various programs as well as on the browser. After installation, you can easily activate and convert audio to text. Pre-recorded audios containing a single speaker can also be quickly transcribed through this tool.

4. Google Docs Voice Typing

Price: Free

The Google speech to text software is in-built in the Google Docs available on the browser. With this free and remarkable tool, you can work faster without having to type in anything. It has around 100 voice commands that help you make edits and formatting. Whether you want to enter bullet points, change lines, or underline a word, this voice to text software by Google is an excellent choice. It is available on the web, but it cannot be downloaded. To use this, hop onto Google Docs and click on Tools, tap on Voice Typing. Then, allow microphone use and start speaking.

5. NaturalReader

Price: Personal:$99.50(one-time payment)

NaturalReader is the kind of speech to text software that can read or narrate a variety of text and multiple document formats so that users do not have to strain their eyes. It helps to convert text into audio files such as MP3. You can even change the pronunciation of a word as you like. NaturalReader offers an online version, as well as a downloadable edition. A free version is also available, but with limited features.

6. Braina Pro

Price: $169/lifetime(limited time offer) or $59/annually

Braina Pro is not just a speech to text converter; rather, it works as a complete virtual assistant. It can set alarms, open or close files, or complete a multitude of tasks on your computer. This software also boasts a mobile app that can be used to control your PC without having to access it physically. Braina Pro supports more than 90 languages. But, you will need an active internet connection to do so. Just subscribe and download the app, open it and click on the microphone icon. Click and say ‘Enter dictation mode‘ and start using it.

7. Speechnotes

Price: Free

A very efficient and powerful speech to text converter is the Speechnotes tool. It is easily accessible as there is no need to download, register, or subscribe. By opening the Speechnotes online link on Chrome, you can click on the microphone icon and start dictating to convert audio to text. There are numerous, frequently used commands and shortcuts displayed on the left side of the screen. What’s more, Speechnotes automatically capitalizes sentence starters and autosaves documents. After completion, the text can be directly saved to the local files or exported to Google Drive.

8. Sobolsoft

Price: Free(500 minutes/month)

With Sobolsoft, you can easily and seamlessly convert audio to text files and save them. The free version allows 500 mins of audio conversion every month. After installation, you can upload the audio files and click on convert to start the process. Also, multiple audio files can be uploaded and converted to text simultaneously. After transcription, the text can be edited and saved. However, only MP3 files can be converted through this speech to text software.

9. Bear File Converter

Price: Free

Bear File Converter is a comprehensive tool that offers a variety of services, including the speech to text converter. It is available online for free use. You can upload audio files that are no more than 3 megabytes in size and click on convert. This speech-to-text software supports the audio file formats supported by this speech to text software are MP3, OGG, WAV, WMA, and many more. You can also add audio files URL. Just click convert to start the process. The files are saved to the device in a word file.

10. Voice Finger

Price: $9.99

Voice Finger is an extremely powerful yet easy-to-use speech to text software that makes all kinds of computer tasks easier. With this tool, you can enjoy hands-free gaming or complete tasks without even touching the mouse. All clicks and holding special keys is also easily done by Voice Finger. This voice to text software is the ultimate solution for gamers or those with extensive writing tasks as it makes everything effortless. Whether you want to move the cursor, type documents, or click to shoot in a game, Voice Finger has got you covered. Just download the software and start using it. A free version is also available.

Conclusion

Before you go on to subscribe or purchase a random speech to text software, it is advisable to weigh out a few suitable options and then choose the one that best fits your needs. If you want to use the voice to text software while you are on the go and don’t have access to an internet connection, remember to check whether it works offline or not.

You can read our rendition of the quick review on the top speech to text software tools that can help save time and effort while maximizing productivity.

KwiCut

Transform Long Videos into Short Ones Instantly

Turn long videos into viral clips. Effortlessly transform lengthy videos into engaging, shareable clips.

Get Started Now

Download For Free

Streamlined Audio Alteration: Techniques for Manipulating Speed & Pitch on the Internet

If you have downloaded an audio story and you find out that the audio speed is rather slow which is making it sound boring, you can change the speed without downloading any software. Similarly, you downloaded a podcast where the speaker is speaking fast and you need to slow down the speed. That is where an audio speed changer online where you can change speed of any audio file easily.

When you change the speed, the pitch of the audio also changes simultaneously. Therefore, most audio speed changing tools are actually speed and pitch changers. However, there are certain audio speed changing tools where you can change speed without changing pitch. Apart from the online audio speed and pitcher charger tools, we have also provided you an audio speed changer software for your requirements.

1. Music Speed Changer

Music Speed Changer is an audio speed and pitch changer that lets you change speed as well as pitch independently. The user interface is quite appealing and you can make the changes and play the audio to check the changes. You can set a loop between any two points on the audio spectrum. Here are the key features of Music Speed Changer.

• Change speed(tempo) and pitch independently.
• Intuitive controls and save changes instantly.
• Make a loop by marking specific points.
• Listen to the changes instantly.

How to change audio speed and pitch with Music Speed Changer?

Step 1. Visit https://app.musicspeedchanger.com on your browser.

Step 2. Click on ‘Choose Audio File’ button to select your audio file.

Step 3. Use the sliders for changing speed(tempo) and pitch accordingly.

Step 4. Play the audio to check the changes and click on Save icon for downloading the modified audio file.

2. Audio Alter

If you have an audio file with an unusual file format such as WAC or OGG, Audio Alter has the best set of audio tools. If you want to change speed, you have to choose Tempo changer. If you want to change pitch, you have to choose audio pitch changer. Besides, there are other useful tools such as equalizer, volume changer, noise reducer and much more. Along with MP3 audio files, you can change speed for WAV, FLAC, OGG audio files. Here are the key features of Audio Alter.

• Individual tools for changing speed and pitch.
• Drag and drop audio file as well as browser from hard drive.
• Supports MP3, WAV, FLAC, OGG audio file formats.
• Live listen to the changes in the audio.

How to change audio speed or pitch with Audio Alter?

Step 1. Visit “audioalter.com/tempo” to change speed or “audioalter.com/pitch-shifter“ to change pitch on your web browser.

Step 2. Click on Browse computer button and select the audio file. Otherwise, drag and drop the audio file directly.

Step 3. Use the slider, you can change the speed or pitch.

Step 4. You can turn on the checkbox “Preserve Pitch” to change audio speed without changing pitch.

Step 5. You can play and check the changes and finally, click on Submit button to process the audio file.

3. Audio Speed Changer

Audio Speed Changer is one of the most popular audio pitch changer online as well as speed changer online tools. There are different sources from which you can upload audio files starting from your hard drive and cloud storage to websites through URLs. You can change speed by percentage as well as change pitch by semitones. Audio Speed Changer is also available as an app and you can opt for Audio Speed Changer Pro for added features. Here are the key features of Audio Speed Changer.

• Change the pitch and speed independently.
• Better processing via time-based and frequency-based methods.
• Save the modified audio file in MP3 or MA4 format.
• Step-by-step interface enables hassle-free operation.

How to change audio speed with Audio Speed Changer?

Step 1. Visit “www.audiospeedchanger.com” from the web browser.

Step 2. Click on Choose File button and select the audio file. If you want to refer to any website’s audio file, you can mention the URL as well.

Step 3. Change pitch and speed as per requirements.

Step 4. Select MP3 and M4A file format to save as the output file.

Step 5. Select the processing method and click on Convert Now button.

Bonus: Change Audio Speed With A Professional Software

If you are looking for a professional editor to tweak the speed, pitch, as well as various other audio properties, we recommend Wondershare Filmora. It is a video editor with inbuilt audio editor. You can even record video and audio on the software and you can trim out useless audio parts as well as sync audio with video perfectly. Most importantly, you can import and export audio files in different file formats. Here are the steps to change audio speed with Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Download and install Wondershare Filmora.

Step 2: Go to File menu and then go Import Media and select Import Media Files option.

Step 3: Import the audio file from your hard drive and it will appear under Project Media folder on Filmora. You need to drag and drop the audio file on audio timeline.

Step 4: Click on Speedometer icon and select the preset speed.

Step 5: If you want a custom speed, click on Custom Speed and set speed according to your requirements.

Step 6: Play the audio file to get satisfied with the changes, click on Export to save the file in preferred file format.

Conclusion

Change audio speed generally changes the pitch of the audio. However, you may want to change speed and pitch separately and independently. That is why we have selected the best audio speed and pitch changers where you can adjust the parameters as per your requirements. You can use these online tools on computer as well as smartphone. We have also recommended Wondershare Filmora for professional audio editing of various audio parameters.

How to change audio speed and pitch with Music Speed Changer?

Step 1. Visit https://app.musicspeedchanger.com on your browser.

Step 2. Click on ‘Choose Audio File’ button to select your audio file.

Step 3. Use the sliders for changing speed(tempo) and pitch accordingly.

Step 4. Play the audio to check the changes and click on Save icon for downloading the modified audio file.

2. Audio Alter

If you have an audio file with an unusual file format such as WAC or OGG, Audio Alter has the best set of audio tools. If you want to change speed, you have to choose Tempo changer. If you want to change pitch, you have to choose audio pitch changer. Besides, there are other useful tools such as equalizer, volume changer, noise reducer and much more. Along with MP3 audio files, you can change speed for WAV, FLAC, OGG audio files. Here are the key features of Audio Alter.

• Individual tools for changing speed and pitch.
• Drag and drop audio file as well as browser from hard drive.
• Supports MP3, WAV, FLAC, OGG audio file formats.
• Live listen to the changes in the audio.

How to change audio speed or pitch with Audio Alter?

Step 1. Visit “audioalter.com/tempo” to change speed or “audioalter.com/pitch-shifter“ to change pitch on your web browser.

Step 2. Click on Browse computer button and select the audio file. Otherwise, drag and drop the audio file directly.

Step 3. Use the slider, you can change the speed or pitch.

Step 4. You can turn on the checkbox “Preserve Pitch” to change audio speed without changing pitch.

Step 5. You can play and check the changes and finally, click on Submit button to process the audio file.

3. Audio Speed Changer

Audio Speed Changer is one of the most popular audio pitch changer online as well as speed changer online tools. There are different sources from which you can upload audio files starting from your hard drive and cloud storage to websites through URLs. You can change speed by percentage as well as change pitch by semitones. Audio Speed Changer is also available as an app and you can opt for Audio Speed Changer Pro for added features. Here are the key features of Audio Speed Changer.

• Change the pitch and speed independently.
• Better processing via time-based and frequency-based methods.
• Save the modified audio file in MP3 or MA4 format.
• Step-by-step interface enables hassle-free operation.

How to change audio speed with Audio Speed Changer?

Step 1. Visit “www.audiospeedchanger.com” from the web browser.

Step 2. Click on Choose File button and select the audio file. If you want to refer to any website’s audio file, you can mention the URL as well.

Step 3. Change pitch and speed as per requirements.

Step 4. Select MP3 and M4A file format to save as the output file.

Step 5. Select the processing method and click on Convert Now button.

Bonus: Change Audio Speed With A Professional Software

If you are looking for a professional editor to tweak the speed, pitch, as well as various other audio properties, we recommend Wondershare Filmora. It is a video editor with inbuilt audio editor. You can even record video and audio on the software and you can trim out useless audio parts as well as sync audio with video perfectly. Most importantly, you can import and export audio files in different file formats. Here are the steps to change audio speed with Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Download and install Wondershare Filmora.

Step 2: Go to File menu and then go Import Media and select Import Media Files option.

Step 3: Import the audio file from your hard drive and it will appear under Project Media folder on Filmora. You need to drag and drop the audio file on audio timeline.

Step 4: Click on Speedometer icon and select the preset speed.

Step 5: If you want a custom speed, click on Custom Speed and set speed according to your requirements.

Step 6: Play the audio file to get satisfied with the changes, click on Export to save the file in preferred file format.

Conclusion

Change audio speed generally changes the pitch of the audio. However, you may want to change speed and pitch separately and independently. That is why we have selected the best audio speed and pitch changers where you can adjust the parameters as per your requirements. You can use these online tools on computer as well as smartphone. We have also recommended Wondershare Filmora for professional audio editing of various audio parameters.

How to change audio speed and pitch with Music Speed Changer?

Step 1. Visit https://app.musicspeedchanger.com on your browser.

Step 2. Click on ‘Choose Audio File’ button to select your audio file.

Step 3. Use the sliders for changing speed(tempo) and pitch accordingly.

Step 4. Play the audio to check the changes and click on Save icon for downloading the modified audio file.

2. Audio Alter

If you have an audio file with an unusual file format such as WAC or OGG, Audio Alter has the best set of audio tools. If you want to change speed, you have to choose Tempo changer. If you want to change pitch, you have to choose audio pitch changer. Besides, there are other useful tools such as equalizer, volume changer, noise reducer and much more. Along with MP3 audio files, you can change speed for WAV, FLAC, OGG audio files. Here are the key features of Audio Alter.

• Individual tools for changing speed and pitch.
• Drag and drop audio file as well as browser from hard drive.
• Supports MP3, WAV, FLAC, OGG audio file formats.
• Live listen to the changes in the audio.

How to change audio speed or pitch with Audio Alter?

Step 1. Visit “audioalter.com/tempo” to change speed or “audioalter.com/pitch-shifter“ to change pitch on your web browser.

Step 2. Click on Browse computer button and select the audio file. Otherwise, drag and drop the audio file directly.

Step 3. Use the slider, you can change the speed or pitch.

Step 4. You can turn on the checkbox “Preserve Pitch” to change audio speed without changing pitch.

Step 5. You can play and check the changes and finally, click on Submit button to process the audio file.

3. Audio Speed Changer

Audio Speed Changer is one of the most popular audio pitch changer online as well as speed changer online tools. There are different sources from which you can upload audio files starting from your hard drive and cloud storage to websites through URLs. You can change speed by percentage as well as change pitch by semitones. Audio Speed Changer is also available as an app and you can opt for Audio Speed Changer Pro for added features. Here are the key features of Audio Speed Changer.

• Change the pitch and speed independently.
• Better processing via time-based and frequency-based methods.
• Save the modified audio file in MP3 or MA4 format.
• Step-by-step interface enables hassle-free operation.

How to change audio speed with Audio Speed Changer?

Step 1. Visit “www.audiospeedchanger.com” from the web browser.

Step 2. Click on Choose File button and select the audio file. If you want to refer to any website’s audio file, you can mention the URL as well.

Step 3. Change pitch and speed as per requirements.

Step 4. Select MP3 and M4A file format to save as the output file.

Step 5. Select the processing method and click on Convert Now button.

Bonus: Change Audio Speed With A Professional Software

If you are looking for a professional editor to tweak the speed, pitch, as well as various other audio properties, we recommend Wondershare Filmora. It is a video editor with inbuilt audio editor. You can even record video and audio on the software and you can trim out useless audio parts as well as sync audio with video perfectly. Most importantly, you can import and export audio files in different file formats. Here are the steps to change audio speed with Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Download and install Wondershare Filmora.

Step 2: Go to File menu and then go Import Media and select Import Media Files option.

Step 3: Import the audio file from your hard drive and it will appear under Project Media folder on Filmora. You need to drag and drop the audio file on audio timeline.

Step 4: Click on Speedometer icon and select the preset speed.

Step 5: If you want a custom speed, click on Custom Speed and set speed according to your requirements.

Step 6: Play the audio file to get satisfied with the changes, click on Export to save the file in preferred file format.

Conclusion

Change audio speed generally changes the pitch of the audio. However, you may want to change speed and pitch separately and independently. That is why we have selected the best audio speed and pitch changers where you can adjust the parameters as per your requirements. You can use these online tools on computer as well as smartphone. We have also recommended Wondershare Filmora for professional audio editing of various audio parameters.

How to change audio speed and pitch with Music Speed Changer?

Step 1. Visit https://app.musicspeedchanger.com on your browser.

Step 2. Click on ‘Choose Audio File’ button to select your audio file.

Step 3. Use the sliders for changing speed(tempo) and pitch accordingly.

Step 4. Play the audio to check the changes and click on Save icon for downloading the modified audio file.

2. Audio Alter

If you have an audio file with an unusual file format such as WAC or OGG, Audio Alter has the best set of audio tools. If you want to change speed, you have to choose Tempo changer. If you want to change pitch, you have to choose audio pitch changer. Besides, there are other useful tools such as equalizer, volume changer, noise reducer and much more. Along with MP3 audio files, you can change speed for WAV, FLAC, OGG audio files. Here are the key features of Audio Alter.

• Individual tools for changing speed and pitch.
• Drag and drop audio file as well as browser from hard drive.
• Supports MP3, WAV, FLAC, OGG audio file formats.
• Live listen to the changes in the audio.

How to change audio speed or pitch with Audio Alter?

Step 1. Visit “audioalter.com/tempo” to change speed or “audioalter.com/pitch-shifter“ to change pitch on your web browser.

Step 2. Click on Browse computer button and select the audio file. Otherwise, drag and drop the audio file directly.

Step 3. Use the slider, you can change the speed or pitch.

Step 4. You can turn on the checkbox “Preserve Pitch” to change audio speed without changing pitch.

Step 5. You can play and check the changes and finally, click on Submit button to process the audio file.

3. Audio Speed Changer

Audio Speed Changer is one of the most popular audio pitch changer online as well as speed changer online tools. There are different sources from which you can upload audio files starting from your hard drive and cloud storage to websites through URLs. You can change speed by percentage as well as change pitch by semitones. Audio Speed Changer is also available as an app and you can opt for Audio Speed Changer Pro for added features. Here are the key features of Audio Speed Changer.

• Change the pitch and speed independently.
• Better processing via time-based and frequency-based methods.
• Save the modified audio file in MP3 or MA4 format.
• Step-by-step interface enables hassle-free operation.

How to change audio speed with Audio Speed Changer?

Step 1. Visit “www.audiospeedchanger.com” from the web browser.

Step 2. Click on Choose File button and select the audio file. If you want to refer to any website’s audio file, you can mention the URL as well.

Step 3. Change pitch and speed as per requirements.

Step 4. Select MP3 and M4A file format to save as the output file.

Step 5. Select the processing method and click on Convert Now button.

Bonus: Change Audio Speed With A Professional Software

If you are looking for a professional editor to tweak the speed, pitch, as well as various other audio properties, we recommend Wondershare Filmora. It is a video editor with inbuilt audio editor. You can even record video and audio on the software and you can trim out useless audio parts as well as sync audio with video perfectly. Most importantly, you can import and export audio files in different file formats. Here are the steps to change audio speed with Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Download and install Wondershare Filmora.

Step 2: Go to File menu and then go Import Media and select Import Media Files option.

Step 3: Import the audio file from your hard drive and it will appear under Project Media folder on Filmora. You need to drag and drop the audio file on audio timeline.

Step 4: Click on Speedometer icon and select the preset speed.

Step 5: If you want a custom speed, click on Custom Speed and set speed according to your requirements.

Step 6: Play the audio file to get satisfied with the changes, click on Export to save the file in preferred file format.

Conclusion

Change audio speed generally changes the pitch of the audio. However, you may want to change speed and pitch separately and independently. That is why we have selected the best audio speed and pitch changers where you can adjust the parameters as per your requirements. You can use these online tools on computer as well as smartphone. We have also recommended Wondershare Filmora for professional audio editing of various audio parameters.

Also read: