Learn How To Fix Distorted Audio Using Different Methods

Create High-Quality Video - Wondershare Filmora

An easy and powerful YouTube video editor

Numerous video and audio effects to choose from

Detailed tutorials are provided by the official channel

Try It Free Try It Free

So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.

In this article

01 What Causes Distorted Audio?

02 How To Fix Distorted Audio Using Different Methods

What Causes Distorted Audio?

Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.

1. Recording Environment

Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.

When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.

2. Touching the Mic While Recording

If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.

3. Using the Wrong Mic

A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.

Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.

4. Positioning Your Microphones Incorrectly

You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.

5. Faulty Equipment

Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.

How To Fix Distorted Audio Using Different Methods

You can fix distorted audio using various methods. They include:

Method 1: How To Fix Distorted Audio in Audacity

Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.

1. Open the audio file by dragging and dropping it into Audacity.
2. Select the distorted part and click on the Effect option. Then, select Noise Reduction.

1. The Noise Reduction window will open.

1. Now, click on Noise Profile, and Audacity will know what to filter out.
2. Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
3. Hit preview to check the audio, then the Click OK button.

If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.

Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.

1. To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”

1. Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
2. Once you have set the values, hit the Preview button to check the audio. Then, click on OK.

That is how to fix distorted audio using Audacity.

You May Be Interested In

• 7 Best Audacity Alternatives for Android
• How to use Audacity for Podcasts

How To Fix Distorted Audio in Garageband

Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:

1. Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
2. Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
3. Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
4. Click the Edit tab to activate it, and a list of effects will pop up.
5. Select Distortion from the list, and you’ll see a drop-down menu.
6. Next, select the None option to remove distortion.

If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.

Method 3: How To Fix Distorted Audio in Windows 10

Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:

• When upgrading your computer from an older version to a new one
• In case your computer gets corrupted with a virus
• If your computer or device doesn’t the right sound drivers

So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.

1. Reinstall drivers

1. Right-click the start button and choose device manager.
2. Navigate through sound, video, and game controllers.
3. Click on the Details tab.
4. Select hardware Ids from the drop-down menu.

1. Copy and first the first value of drivers in your browser and search the internet.

1. Open the official site and download the correct driver。
2. Install and restart your PC。

2. Update drivers

1. Right-click on the start button.
2. Scroll to the sound, video, and game controllers option.
3. Right-click on the sound device and select uninstall the device.

1. Restart your PC after the uninstall process is finished.
2. Open the device manager.
3. Select and click on the scan for hardware changes option.

Windows will automatically install a new version of sound drivers

3. Run Windows Audio Troubleshooter

1. To use this method, open Start and click the cog-like icon. This will open the Settings app.
2. Select Update & security.
3. Choose Troubleshoot in the left pane.
4. Expand the Playing Audio by clicking it.
5. Hit the Run the troubleshooter button, then follow the further instructions.

4. Take Exclusive Control of Your Device Option by Disabling Allow Applications

1. Navigate to the notification area and right-click on the sound icon. Open Playback devices.
2. Next, right-click on the default Playback Device, then open Properties.
3. Choose the Advanced tab option.
4. Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.

When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.

Try It Free Try It Free

So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.

In this article

01 What Causes Distorted Audio?

02 How To Fix Distorted Audio Using Different Methods

What Causes Distorted Audio?

Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.

1. Recording Environment

Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.

When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.

2. Touching the Mic While Recording

If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.

3. Using the Wrong Mic

A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.

Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.

4. Positioning Your Microphones Incorrectly

You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.

5. Faulty Equipment

Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.

How To Fix Distorted Audio Using Different Methods

You can fix distorted audio using various methods. They include:

Method 1: How To Fix Distorted Audio in Audacity

Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.

1. Open the audio file by dragging and dropping it into Audacity.
2. Select the distorted part and click on the Effect option. Then, select Noise Reduction.

1. The Noise Reduction window will open.

1. Now, click on Noise Profile, and Audacity will know what to filter out.
2. Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
3. Hit preview to check the audio, then the Click OK button.

If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.

Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.

1. To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”

1. Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
2. Once you have set the values, hit the Preview button to check the audio. Then, click on OK.

That is how to fix distorted audio using Audacity.

You May Be Interested In

• 7 Best Audacity Alternatives for Android
• How to use Audacity for Podcasts

How To Fix Distorted Audio in Garageband

Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:

1. Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
2. Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
3. Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
4. Click the Edit tab to activate it, and a list of effects will pop up.
5. Select Distortion from the list, and you’ll see a drop-down menu.
6. Next, select the None option to remove distortion.

If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.

Method 3: How To Fix Distorted Audio in Windows 10

Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:

• When upgrading your computer from an older version to a new one
• In case your computer gets corrupted with a virus
• If your computer or device doesn’t the right sound drivers

So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.

1. Reinstall drivers

1. Right-click the start button and choose device manager.
2. Navigate through sound, video, and game controllers.
3. Click on the Details tab.
4. Select hardware Ids from the drop-down menu.

1. Copy and first the first value of drivers in your browser and search the internet.

1. Open the official site and download the correct driver。
2. Install and restart your PC。

2. Update drivers

1. Right-click on the start button.
2. Scroll to the sound, video, and game controllers option.
3. Right-click on the sound device and select uninstall the device.

1. Restart your PC after the uninstall process is finished.
2. Open the device manager.
3. Select and click on the scan for hardware changes option.

Windows will automatically install a new version of sound drivers

3. Run Windows Audio Troubleshooter

1. To use this method, open Start and click the cog-like icon. This will open the Settings app.
2. Select Update & security.
3. Choose Troubleshoot in the left pane.
4. Expand the Playing Audio by clicking it.
5. Hit the Run the troubleshooter button, then follow the further instructions.

4. Take Exclusive Control of Your Device Option by Disabling Allow Applications

1. Navigate to the notification area and right-click on the sound icon. Open Playback devices.
2. Next, right-click on the default Playback Device, then open Properties.
3. Choose the Advanced tab option.
4. Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.

When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.

Try It Free Try It Free

So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.

In this article

01 What Causes Distorted Audio?

02 How To Fix Distorted Audio Using Different Methods

What Causes Distorted Audio?

Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.

1. Recording Environment

Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.

When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.

2. Touching the Mic While Recording

If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.

3. Using the Wrong Mic

A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.

Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.

4. Positioning Your Microphones Incorrectly

You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.

5. Faulty Equipment

Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.

How To Fix Distorted Audio Using Different Methods

You can fix distorted audio using various methods. They include:

Method 1: How To Fix Distorted Audio in Audacity

Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.

1. Open the audio file by dragging and dropping it into Audacity.
2. Select the distorted part and click on the Effect option. Then, select Noise Reduction.

1. The Noise Reduction window will open.

1. Now, click on Noise Profile, and Audacity will know what to filter out.
2. Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
3. Hit preview to check the audio, then the Click OK button.

If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.

Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.

1. To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”

1. Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
2. Once you have set the values, hit the Preview button to check the audio. Then, click on OK.

That is how to fix distorted audio using Audacity.

You May Be Interested In

• 7 Best Audacity Alternatives for Android
• How to use Audacity for Podcasts

How To Fix Distorted Audio in Garageband

Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:

1. Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
2. Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
3. Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
4. Click the Edit tab to activate it, and a list of effects will pop up.
5. Select Distortion from the list, and you’ll see a drop-down menu.
6. Next, select the None option to remove distortion.

If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.

Method 3: How To Fix Distorted Audio in Windows 10

Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:

• When upgrading your computer from an older version to a new one
• In case your computer gets corrupted with a virus
• If your computer or device doesn’t the right sound drivers

So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.

1. Reinstall drivers

1. Right-click the start button and choose device manager.
2. Navigate through sound, video, and game controllers.
3. Click on the Details tab.
4. Select hardware Ids from the drop-down menu.

1. Copy and first the first value of drivers in your browser and search the internet.

1. Open the official site and download the correct driver。
2. Install and restart your PC。

2. Update drivers

1. Right-click on the start button.
2. Scroll to the sound, video, and game controllers option.
3. Right-click on the sound device and select uninstall the device.

1. Restart your PC after the uninstall process is finished.
2. Open the device manager.
3. Select and click on the scan for hardware changes option.

Windows will automatically install a new version of sound drivers

3. Run Windows Audio Troubleshooter

1. To use this method, open Start and click the cog-like icon. This will open the Settings app.
2. Select Update & security.
3. Choose Troubleshoot in the left pane.
4. Expand the Playing Audio by clicking it.
5. Hit the Run the troubleshooter button, then follow the further instructions.

4. Take Exclusive Control of Your Device Option by Disabling Allow Applications

1. Navigate to the notification area and right-click on the sound icon. Open Playback devices.
2. Next, right-click on the default Playback Device, then open Properties.
3. Choose the Advanced tab option.
4. Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.

When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.

Try It Free Try It Free

So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.

In this article

01 What Causes Distorted Audio?

02 How To Fix Distorted Audio Using Different Methods

What Causes Distorted Audio?

Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.

1. Recording Environment

Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.

When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.

2. Touching the Mic While Recording

If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.

3. Using the Wrong Mic

A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.

Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.

4. Positioning Your Microphones Incorrectly

You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.

5. Faulty Equipment

Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.

How To Fix Distorted Audio Using Different Methods

You can fix distorted audio using various methods. They include:

Method 1: How To Fix Distorted Audio in Audacity

Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.

1. Open the audio file by dragging and dropping it into Audacity.
2. Select the distorted part and click on the Effect option. Then, select Noise Reduction.

1. The Noise Reduction window will open.

1. Now, click on Noise Profile, and Audacity will know what to filter out.
2. Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
3. Hit preview to check the audio, then the Click OK button.

If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.

Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.

1. To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”

1. Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
2. Once you have set the values, hit the Preview button to check the audio. Then, click on OK.

That is how to fix distorted audio using Audacity.

You May Be Interested In

• 7 Best Audacity Alternatives for Android
• How to use Audacity for Podcasts

How To Fix Distorted Audio in Garageband

Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:

1. Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
2. Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
3. Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
4. Click the Edit tab to activate it, and a list of effects will pop up.
5. Select Distortion from the list, and you’ll see a drop-down menu.
6. Next, select the None option to remove distortion.

If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.

Method 3: How To Fix Distorted Audio in Windows 10

Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:

• When upgrading your computer from an older version to a new one
• In case your computer gets corrupted with a virus
• If your computer or device doesn’t the right sound drivers

So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.

1. Reinstall drivers

1. Right-click the start button and choose device manager.
2. Navigate through sound, video, and game controllers.
3. Click on the Details tab.
4. Select hardware Ids from the drop-down menu.

1. Copy and first the first value of drivers in your browser and search the internet.

1. Open the official site and download the correct driver。
2. Install and restart your PC。

2. Update drivers

1. Right-click on the start button.
2. Scroll to the sound, video, and game controllers option.
3. Right-click on the sound device and select uninstall the device.

1. Restart your PC after the uninstall process is finished.
2. Open the device manager.
3. Select and click on the scan for hardware changes option.

Windows will automatically install a new version of sound drivers

3. Run Windows Audio Troubleshooter

1. To use this method, open Start and click the cog-like icon. This will open the Settings app.
2. Select Update & security.
3. Choose Troubleshoot in the left pane.
4. Expand the Playing Audio by clicking it.
5. Hit the Run the troubleshooter button, then follow the further instructions.

4. Take Exclusive Control of Your Device Option by Disabling Allow Applications

1. Navigate to the notification area and right-click on the sound icon. Open Playback devices.
2. Next, right-click on the default Playback Device, then open Properties.
3. Choose the Advanced tab option.
4. Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.

When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.

Tips for Synchronizing Volumes Across Tracks Using the VLC Media Player

How To Normalize Volume in VLC

How to normalize volume, why should we do it, and what is it after all? – these are the questions when it comes to editing our audio files, as well as the video clips we tend to change the sound of. So, first of all, the volume normalization is pretty much explained as follows: The process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. If it is a little bit difficult to understand, we have to highlight that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

But, why bother at all and why not leave it the way it is? Well, the answer to this is almost the same as on why editing exists in general, right? Things are not perfect! This is the fact that prompts us to make our video clips and audio better, improve it at least on the level which can get us the right amount of viewers and listeners. Everyone have had some pain listening to several podcasts, when the volume was too high or too low, or there were so much background noise that the whole recording was hurting the ears of a person! People will not convert to being loyal subscribers, viewers and listeners if their user experience is not favored. So, it is in our best interest to serve their best interest, with a little bit of editing.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

In the first case, you might have somewhat quite voice recording, and would like to make it better without changing its dynamic range, while making it as loud as possible. And when it comes to matching volumes, it is logical that you need to manipulate your editing this way in case you have a group of audio files, each or some of them are at different volumes, so, understandably, if not necessarily, you would like to make them come closer to the same volume.

So, until we give you the step-by step guide on how to normalize your volume in VLC player, we also need to inform you about audio normalization types. Here, generally, we come across three of them: a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. Last but not least, RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

Using any of this, making it better to listen to your voice, without people being annoyed and their ears becoming exhausting with what you have to offer, you will be making it enjoyable for them and easy to come back to your content, as they will not be obliged to change the volume on their own audio players. Instead, their experience with you will be calm and effortless, which you are aiming to achieve.

So, not, what about VLC? – this is a very popular media player, favorite for a lot of people all around the world, so you should already be quite familiar with what it is, at least by having streamed videos and movies there. Speaking more of what it represents, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and additionally, the program can stream from popular websites such as Disney+, Hulu, Netflix, and so on.

As if it was not enough, you can do simple video and audio editing in VLC Media Player, which a lot of people are unaware of! For example, you can easily trim and cut videos. So, as it happens, we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. Sooo… How to do that? Because, actually, it is so simple that you might be surprised you didn’t know about this earlier. To learn how to normalize volume in VLC, follow this simple guideline:

First, of course, as every time working with any software, you need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, you will need to check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, you can Save.

This is not something perfect, because it’s so simple to do and actually what it does is just help adjust the general volume, so it leaves the specifics alone.

But, it might be the case that you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC. So, you can do more with the Audio Effects menu there. And the steps are as follows:

First, on your VLC player, find Tools and then, in the menu, go to Preferences. The window will open, and there you need to select All in Show settings – actually it is a little bit hard to find because this is in the bottom left corner of the window. From there, you will need to navigate to Audio, and then, a little below, click on Filters and highlight it. The checkbox next to the Dynamic range compressor will probably be unchecked – so, check in it.

Next, see where Compressor is in the left panel? Select it. And now, you are free to make the changes to the levels as you see fit.

Here, if you are a little bit overwhelmed with the wide range of options to work on, you can just concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Don’t underestimate Attack time and release time, either. They graduate the changes to ramp them up at first, then down again, rather than initiating them immediately. So, if you set them to your liking as well, this will ensure that you have a more fluid transition in and out of the scene and there are less sudden, sometimes scary volume changes.

Therefore, you are now equipped with the most information you will need to normalize volume in VLC Player – so free to give it a go, play around with the different settings and carry out the best result imaginable for you!

How to normalize audio in Wondershare Filmora?

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor , but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

The Ultimate AVS Companion: A Deep Dive Into Audio Editing Tools, Key Traits, Reviews & Options to Consider

You might have tried using the audio editor for fun. Have you ever tried using a fun kind of audio editor for both professional and non-professional purposes? We have an option for you! AVS Audio Editor is editing software that is used for fun as well as professional reasons. It is a great editor because of its features and ease of working.

You can use any audio editor to make your content better, but in this case of the article, we will be discussing AVS Audio Editor Software. Read the review and enjoy!

In this article

01 AVS Audio Editor Product Details

02 Key Features of AVS Audio Editor

03 Pros and Cons of AVS Audio Editor

04 How to Use AVS Audio Editor?

05 Alternatives for AVS Audio Editor

Part 1. AVS Audio Editor Product Details

What is AVS Audio Editor ? It is multi-functional audio editing software. You can use it to do basic editing like cut, paste, trim and merge different audio tracks. The editor allows the user to use multiple audio formats, including WMA, MP2, etc. AVS Audio Editor portable has a built-in audio equalizer which allows for editing volumes and performing Noise Reduction along with it.

AVS Audio Editor is also an audio recorder. It has around 20 effects and filters that the user can choose from. Moreover, you can use the AVS sound editor to extract audio from videos and use them for different purposes.

Recommend System Requirements

Operating System	Windows 7/10/11, Windows 8.x
Processor	Dual-Core (Intel i3 or AMD Equitant)
RAM	2GB or Higher
Video	Windows 7/10/11, Windows 8.x compatible video card
Sound	Windows 7/10/11, Windows 8.x compatible sound card
File Size	47.32 MB

Part 2. Key Features of AVS Audio Editor

AVS Audio Editor portable is a brilliant choice for editing and transforming your audio files. The reason behind this is the features and editing options that one can avail of from this editor. If you are not aware of much of its features, then this section will prove helpful for you. Let’s talk about some features that you can get from AVS Audio Editor.

· Editing Options

What diverse editing options do you get from AVS Audio Editor? Well, you can easily Trim, Cut, Join, Delete, Split audio files. Moreover, mixing different audio tracks and blending them is also offered by this editor.

· Effects

AVS editor is a great editing option because of the effects it offers. While editing with AVS Audio Editor, don’t forget to try its sound effects like Echo, Chorus, Reverb, etc. In addition to that, use its Remove Noise, Change Sound Bitrate, Equalizer options.

· View Options

Do you know how many different view options AVS Audio Editor offers? After you open the tool, head to the View section from the top menu bar, you will see 3 different view options. With AVS editor, view your files in Waveform, Spectral View, and also Envelope View.

Part 3. Pros and Cons of AVS Audio Editor

Now that you know about AVS Audio Editor and its features, are you excited to learn something else about it? Well, the following section of this article will shed light on the pros and cons that you get if you use this editor. Let’s start!

Benefits

• If we talk about the ease of using this audio editor and its customer service quality, AVS Audio Editor is a 4-star audio editor.
• Do you love to create your ringtones? For anyone who loves to use customized ringtones, try AVS Audio Editor portable.
• This audio editor is perfect for enhancing audio quality, even from cassette tape recordings. Moreover, you can trim files with an AVS editor.
• Want to know the best thing about AVS Audio Editor? It offers a Text-to-Speech feature where you can get the natural-sounding voice of your written text.

Drawback

• The biggest downside of this audio editor is that AVS Audio Editor does not support Mac and Linux systems.

Part 4. How to Use AVS Audio Editor?

Do you have any idea how easy it is to use AVS Audio Editor? From easy editing, you can achieve audio files edited like professionals. If you are scared of using the editor for the first time, try these steps that are shared for your assistance. Let’s get started!

Step 1: Start by installing and launching the audio editor on your device. After that, you should import the media file. For that, tap on the ‘Open’ button to import from your device. Or else, you can also use the ‘Import from Video’ option.

Step 2: As soon as the file has been imported to the editor, you should start the editing by accessing the ‘Edit’ tab. Different editing options like audio cut, mix, etc., are offered by AVS audio editor, which you can easily avail. You can also convert sample type.

Step 3: Are you ready to know about the different effects that you get from this editor? Well, AVS editor provides some stunning options like Amplify, AutoCorrect, Noise Removal, Delete Silence, Normalize, Compress, and much more. Head to the ‘Effects’ tab to access these options.

Step 4: After the fun and all the editing is over, save the final file. You can either save by hitting on the ‘Save’ icon. Or else, the file can also be saved by tapping on the ‘File’ tab and selecting the ‘Save’ option.

Part 5. Alternatives for AVS Audio Editor

AVS Audio Editor might not be used by some people due to some issues. There are alternatives for this editor as well. We are discussing two different alternatives for AVS Audio Editor. The two discussed editors are the best options available in the market that can replace AVS editors.

MixPad Multitrack Recording Software

MixPad is an intuitive and easy audio editing software. You can use it on Windows and macOS supported devices. It can mix an unlimited number of audio and can record new audio as well. You can use pre-recorded tracks for editing and mixing purposes. It has a built-in library full of sound effects and music. MixPad supports uploading to social media platforms; along with that, it supports audio in multiple formats.

Adobe Audition

Adobe Audition is a top-notch audio editing software. You can use it for editing along with recording audio. It allows you to merge different tracks and remix them as per your needs. Audition also allows the users to restore and repair audios. You can use the editor to achieve professional finishing even if you are not a professional. Adobe Audition is a powerful software to work with.

Final Thoughts

After reading this detailed review on AVS Audio Editor, what have you learned? This article talked about the audio editor, its features, and a guideline for its steps has also been shared. If we ask you to name another great audio editor, can you? You probably don’t know about Wondershare Filmora Audio Editor if you can’t answer this question. Filmora is a great and powerful audio editor with so many different features.

If we talk about its features, you will never turn back to ordinary editors. The unmatched editor comes with features like Audio Ducking, Audio Equalizer, Audio Denoise, and so much more. You can name the feature, and Filmora has it. Some basic editing tools include Trim, Split, Cut, Adjust Audio, etc. You should surely look into this tool while managing your audio if you look forward to a seamless experience.

02 Key Features of AVS Audio Editor

03 Pros and Cons of AVS Audio Editor

04 How to Use AVS Audio Editor?

05 Alternatives for AVS Audio Editor

Part 1. AVS Audio Editor Product Details

What is AVS Audio Editor ? It is multi-functional audio editing software. You can use it to do basic editing like cut, paste, trim and merge different audio tracks. The editor allows the user to use multiple audio formats, including WMA, MP2, etc. AVS Audio Editor portable has a built-in audio equalizer which allows for editing volumes and performing Noise Reduction along with it.

AVS Audio Editor is also an audio recorder. It has around 20 effects and filters that the user can choose from. Moreover, you can use the AVS sound editor to extract audio from videos and use them for different purposes.

Recommend System Requirements

Operating System	Windows 7/10/11, Windows 8.x
Processor	Dual-Core (Intel i3 or AMD Equitant)
RAM	2GB or Higher
Video	Windows 7/10/11, Windows 8.x compatible video card
Sound	Windows 7/10/11, Windows 8.x compatible sound card
File Size	47.32 MB

Part 2. Key Features of AVS Audio Editor

AVS Audio Editor portable is a brilliant choice for editing and transforming your audio files. The reason behind this is the features and editing options that one can avail of from this editor. If you are not aware of much of its features, then this section will prove helpful for you. Let’s talk about some features that you can get from AVS Audio Editor.

· Editing Options

What diverse editing options do you get from AVS Audio Editor? Well, you can easily Trim, Cut, Join, Delete, Split audio files. Moreover, mixing different audio tracks and blending them is also offered by this editor.

· Effects

AVS editor is a great editing option because of the effects it offers. While editing with AVS Audio Editor, don’t forget to try its sound effects like Echo, Chorus, Reverb, etc. In addition to that, use its Remove Noise, Change Sound Bitrate, Equalizer options.

· View Options

Do you know how many different view options AVS Audio Editor offers? After you open the tool, head to the View section from the top menu bar, you will see 3 different view options. With AVS editor, view your files in Waveform, Spectral View, and also Envelope View.

Part 3. Pros and Cons of AVS Audio Editor

Now that you know about AVS Audio Editor and its features, are you excited to learn something else about it? Well, the following section of this article will shed light on the pros and cons that you get if you use this editor. Let’s start!

Benefits

• If we talk about the ease of using this audio editor and its customer service quality, AVS Audio Editor is a 4-star audio editor.
• Do you love to create your ringtones? For anyone who loves to use customized ringtones, try AVS Audio Editor portable.
• This audio editor is perfect for enhancing audio quality, even from cassette tape recordings. Moreover, you can trim files with an AVS editor.
• Want to know the best thing about AVS Audio Editor? It offers a Text-to-Speech feature where you can get the natural-sounding voice of your written text.

Drawback

• The biggest downside of this audio editor is that AVS Audio Editor does not support Mac and Linux systems.

Part 4. How to Use AVS Audio Editor?

Do you have any idea how easy it is to use AVS Audio Editor? From easy editing, you can achieve audio files edited like professionals. If you are scared of using the editor for the first time, try these steps that are shared for your assistance. Let’s get started!

Step 1: Start by installing and launching the audio editor on your device. After that, you should import the media file. For that, tap on the ‘Open’ button to import from your device. Or else, you can also use the ‘Import from Video’ option.

Step 2: As soon as the file has been imported to the editor, you should start the editing by accessing the ‘Edit’ tab. Different editing options like audio cut, mix, etc., are offered by AVS audio editor, which you can easily avail. You can also convert sample type.

Step 3: Are you ready to know about the different effects that you get from this editor? Well, AVS editor provides some stunning options like Amplify, AutoCorrect, Noise Removal, Delete Silence, Normalize, Compress, and much more. Head to the ‘Effects’ tab to access these options.

Step 4: After the fun and all the editing is over, save the final file. You can either save by hitting on the ‘Save’ icon. Or else, the file can also be saved by tapping on the ‘File’ tab and selecting the ‘Save’ option.

Part 5. Alternatives for AVS Audio Editor

AVS Audio Editor might not be used by some people due to some issues. There are alternatives for this editor as well. We are discussing two different alternatives for AVS Audio Editor. The two discussed editors are the best options available in the market that can replace AVS editors.

MixPad Multitrack Recording Software

MixPad is an intuitive and easy audio editing software. You can use it on Windows and macOS supported devices. It can mix an unlimited number of audio and can record new audio as well. You can use pre-recorded tracks for editing and mixing purposes. It has a built-in library full of sound effects and music. MixPad supports uploading to social media platforms; along with that, it supports audio in multiple formats.

Adobe Audition

Adobe Audition is a top-notch audio editing software. You can use it for editing along with recording audio. It allows you to merge different tracks and remix them as per your needs. Audition also allows the users to restore and repair audios. You can use the editor to achieve professional finishing even if you are not a professional. Adobe Audition is a powerful software to work with.

Final Thoughts

After reading this detailed review on AVS Audio Editor, what have you learned? This article talked about the audio editor, its features, and a guideline for its steps has also been shared. If we ask you to name another great audio editor, can you? You probably don’t know about Wondershare Filmora Audio Editor if you can’t answer this question. Filmora is a great and powerful audio editor with so many different features.

If we talk about its features, you will never turn back to ordinary editors. The unmatched editor comes with features like Audio Ducking, Audio Equalizer, Audio Denoise, and so much more. You can name the feature, and Filmora has it. Some basic editing tools include Trim, Split, Cut, Adjust Audio, etc. You should surely look into this tool while managing your audio if you look forward to a seamless experience.

02 Key Features of AVS Audio Editor

03 Pros and Cons of AVS Audio Editor

04 How to Use AVS Audio Editor?

05 Alternatives for AVS Audio Editor

Part 1. AVS Audio Editor Product Details

What is AVS Audio Editor ? It is multi-functional audio editing software. You can use it to do basic editing like cut, paste, trim and merge different audio tracks. The editor allows the user to use multiple audio formats, including WMA, MP2, etc. AVS Audio Editor portable has a built-in audio equalizer which allows for editing volumes and performing Noise Reduction along with it.

AVS Audio Editor is also an audio recorder. It has around 20 effects and filters that the user can choose from. Moreover, you can use the AVS sound editor to extract audio from videos and use them for different purposes.

Recommend System Requirements

Operating System	Windows 7/10/11, Windows 8.x
Processor	Dual-Core (Intel i3 or AMD Equitant)
RAM	2GB or Higher
Video	Windows 7/10/11, Windows 8.x compatible video card
Sound	Windows 7/10/11, Windows 8.x compatible sound card
File Size	47.32 MB

Part 2. Key Features of AVS Audio Editor

AVS Audio Editor portable is a brilliant choice for editing and transforming your audio files. The reason behind this is the features and editing options that one can avail of from this editor. If you are not aware of much of its features, then this section will prove helpful for you. Let’s talk about some features that you can get from AVS Audio Editor.

· Editing Options

What diverse editing options do you get from AVS Audio Editor? Well, you can easily Trim, Cut, Join, Delete, Split audio files. Moreover, mixing different audio tracks and blending them is also offered by this editor.

· Effects

AVS editor is a great editing option because of the effects it offers. While editing with AVS Audio Editor, don’t forget to try its sound effects like Echo, Chorus, Reverb, etc. In addition to that, use its Remove Noise, Change Sound Bitrate, Equalizer options.

· View Options

Do you know how many different view options AVS Audio Editor offers? After you open the tool, head to the View section from the top menu bar, you will see 3 different view options. With AVS editor, view your files in Waveform, Spectral View, and also Envelope View.

Part 3. Pros and Cons of AVS Audio Editor

Now that you know about AVS Audio Editor and its features, are you excited to learn something else about it? Well, the following section of this article will shed light on the pros and cons that you get if you use this editor. Let’s start!

Benefits

• If we talk about the ease of using this audio editor and its customer service quality, AVS Audio Editor is a 4-star audio editor.
• Do you love to create your ringtones? For anyone who loves to use customized ringtones, try AVS Audio Editor portable.
• This audio editor is perfect for enhancing audio quality, even from cassette tape recordings. Moreover, you can trim files with an AVS editor.
• Want to know the best thing about AVS Audio Editor? It offers a Text-to-Speech feature where you can get the natural-sounding voice of your written text.

Drawback

• The biggest downside of this audio editor is that AVS Audio Editor does not support Mac and Linux systems.

Part 4. How to Use AVS Audio Editor?

Do you have any idea how easy it is to use AVS Audio Editor? From easy editing, you can achieve audio files edited like professionals. If you are scared of using the editor for the first time, try these steps that are shared for your assistance. Let’s get started!

Step 1: Start by installing and launching the audio editor on your device. After that, you should import the media file. For that, tap on the ‘Open’ button to import from your device. Or else, you can also use the ‘Import from Video’ option.

Step 2: As soon as the file has been imported to the editor, you should start the editing by accessing the ‘Edit’ tab. Different editing options like audio cut, mix, etc., are offered by AVS audio editor, which you can easily avail. You can also convert sample type.

Step 3: Are you ready to know about the different effects that you get from this editor? Well, AVS editor provides some stunning options like Amplify, AutoCorrect, Noise Removal, Delete Silence, Normalize, Compress, and much more. Head to the ‘Effects’ tab to access these options.

Step 4: After the fun and all the editing is over, save the final file. You can either save by hitting on the ‘Save’ icon. Or else, the file can also be saved by tapping on the ‘File’ tab and selecting the ‘Save’ option.

Part 5. Alternatives for AVS Audio Editor

AVS Audio Editor might not be used by some people due to some issues. There are alternatives for this editor as well. We are discussing two different alternatives for AVS Audio Editor. The two discussed editors are the best options available in the market that can replace AVS editors.

MixPad Multitrack Recording Software

MixPad is an intuitive and easy audio editing software. You can use it on Windows and macOS supported devices. It can mix an unlimited number of audio and can record new audio as well. You can use pre-recorded tracks for editing and mixing purposes. It has a built-in library full of sound effects and music. MixPad supports uploading to social media platforms; along with that, it supports audio in multiple formats.

Adobe Audition

Adobe Audition is a top-notch audio editing software. You can use it for editing along with recording audio. It allows you to merge different tracks and remix them as per your needs. Audition also allows the users to restore and repair audios. You can use the editor to achieve professional finishing even if you are not a professional. Adobe Audition is a powerful software to work with.

Final Thoughts

After reading this detailed review on AVS Audio Editor, what have you learned? This article talked about the audio editor, its features, and a guideline for its steps has also been shared. If we ask you to name another great audio editor, can you? You probably don’t know about Wondershare Filmora Audio Editor if you can’t answer this question. Filmora is a great and powerful audio editor with so many different features.

If we talk about its features, you will never turn back to ordinary editors. The unmatched editor comes with features like Audio Ducking, Audio Equalizer, Audio Denoise, and so much more. You can name the feature, and Filmora has it. Some basic editing tools include Trim, Split, Cut, Adjust Audio, etc. You should surely look into this tool while managing your audio if you look forward to a seamless experience.

02 Key Features of AVS Audio Editor

03 Pros and Cons of AVS Audio Editor

04 How to Use AVS Audio Editor?

05 Alternatives for AVS Audio Editor

Part 1. AVS Audio Editor Product Details

What is AVS Audio Editor ? It is multi-functional audio editing software. You can use it to do basic editing like cut, paste, trim and merge different audio tracks. The editor allows the user to use multiple audio formats, including WMA, MP2, etc. AVS Audio Editor portable has a built-in audio equalizer which allows for editing volumes and performing Noise Reduction along with it.

AVS Audio Editor is also an audio recorder. It has around 20 effects and filters that the user can choose from. Moreover, you can use the AVS sound editor to extract audio from videos and use them for different purposes.

Recommend System Requirements

Operating System	Windows 7/10/11, Windows 8.x
Processor	Dual-Core (Intel i3 or AMD Equitant)
RAM	2GB or Higher
Video	Windows 7/10/11, Windows 8.x compatible video card
Sound	Windows 7/10/11, Windows 8.x compatible sound card
File Size	47.32 MB

Part 2. Key Features of AVS Audio Editor

AVS Audio Editor portable is a brilliant choice for editing and transforming your audio files. The reason behind this is the features and editing options that one can avail of from this editor. If you are not aware of much of its features, then this section will prove helpful for you. Let’s talk about some features that you can get from AVS Audio Editor.

· Editing Options

What diverse editing options do you get from AVS Audio Editor? Well, you can easily Trim, Cut, Join, Delete, Split audio files. Moreover, mixing different audio tracks and blending them is also offered by this editor.

· Effects

AVS editor is a great editing option because of the effects it offers. While editing with AVS Audio Editor, don’t forget to try its sound effects like Echo, Chorus, Reverb, etc. In addition to that, use its Remove Noise, Change Sound Bitrate, Equalizer options.

· View Options

Do you know how many different view options AVS Audio Editor offers? After you open the tool, head to the View section from the top menu bar, you will see 3 different view options. With AVS editor, view your files in Waveform, Spectral View, and also Envelope View.

Part 3. Pros and Cons of AVS Audio Editor

Now that you know about AVS Audio Editor and its features, are you excited to learn something else about it? Well, the following section of this article will shed light on the pros and cons that you get if you use this editor. Let’s start!

Benefits

• If we talk about the ease of using this audio editor and its customer service quality, AVS Audio Editor is a 4-star audio editor.
• Do you love to create your ringtones? For anyone who loves to use customized ringtones, try AVS Audio Editor portable.
• This audio editor is perfect for enhancing audio quality, even from cassette tape recordings. Moreover, you can trim files with an AVS editor.
• Want to know the best thing about AVS Audio Editor? It offers a Text-to-Speech feature where you can get the natural-sounding voice of your written text.

Drawback

• The biggest downside of this audio editor is that AVS Audio Editor does not support Mac and Linux systems.

Part 4. How to Use AVS Audio Editor?

Do you have any idea how easy it is to use AVS Audio Editor? From easy editing, you can achieve audio files edited like professionals. If you are scared of using the editor for the first time, try these steps that are shared for your assistance. Let’s get started!

Step 1: Start by installing and launching the audio editor on your device. After that, you should import the media file. For that, tap on the ‘Open’ button to import from your device. Or else, you can also use the ‘Import from Video’ option.

Step 2: As soon as the file has been imported to the editor, you should start the editing by accessing the ‘Edit’ tab. Different editing options like audio cut, mix, etc., are offered by AVS audio editor, which you can easily avail. You can also convert sample type.

Step 3: Are you ready to know about the different effects that you get from this editor? Well, AVS editor provides some stunning options like Amplify, AutoCorrect, Noise Removal, Delete Silence, Normalize, Compress, and much more. Head to the ‘Effects’ tab to access these options.

Step 4: After the fun and all the editing is over, save the final file. You can either save by hitting on the ‘Save’ icon. Or else, the file can also be saved by tapping on the ‘File’ tab and selecting the ‘Save’ option.

Part 5. Alternatives for AVS Audio Editor

AVS Audio Editor might not be used by some people due to some issues. There are alternatives for this editor as well. We are discussing two different alternatives for AVS Audio Editor. The two discussed editors are the best options available in the market that can replace AVS editors.

MixPad Multitrack Recording Software

MixPad is an intuitive and easy audio editing software. You can use it on Windows and macOS supported devices. It can mix an unlimited number of audio and can record new audio as well. You can use pre-recorded tracks for editing and mixing purposes. It has a built-in library full of sound effects and music. MixPad supports uploading to social media platforms; along with that, it supports audio in multiple formats.

Adobe Audition

Adobe Audition is a top-notch audio editing software. You can use it for editing along with recording audio. It allows you to merge different tracks and remix them as per your needs. Audition also allows the users to restore and repair audios. You can use the editor to achieve professional finishing even if you are not a professional. Adobe Audition is a powerful software to work with.

Final Thoughts

After reading this detailed review on AVS Audio Editor, what have you learned? This article talked about the audio editor, its features, and a guideline for its steps has also been shared. If we ask you to name another great audio editor, can you? You probably don’t know about Wondershare Filmora Audio Editor if you can’t answer this question. Filmora is a great and powerful audio editor with so many different features.

If we talk about its features, you will never turn back to ordinary editors. The unmatched editor comes with features like Audio Ducking, Audio Equalizer, Audio Denoise, and so much more. You can name the feature, and Filmora has it. Some basic editing tools include Trim, Split, Cut, Adjust Audio, etc. You should surely look into this tool while managing your audio if you look forward to a seamless experience.

Also read: