The Path to a New Sonic Presence: Innovative Approaches to Vocal Adaptation

Some people prefer to hide their identity by changing their voices. The fact that every person has a unique and distinct voice makes it hard for anyone to find out if you are the same or a different person. The question here is that how can you change your voice?

Various ways could be used to get this done. The article understudy will talk about different practices to change your voice, and we will also discuss voice changers with effects to change your voice. If you want to learn about changing your voice, then let’s get started!

In this article

01 What Factors Make Your Sound Unique and Special?

02 How to Change Your Voice in Practice?

03 How to Change Your Voice with Voice Changer Apps?

Part 1. What Factors Make Your Sound Unique and Special?

Naturally, a person’s voice changes with time. Although time is not only the reason, the environment also plays an essential role in changing voice. The environment has a significant effect on the way someone walks, talks, or even how someone acts on something. There are various factors upon which your voice sounds unique and special; some of these factors are briefly discussed below:

1. Gender

Females have small vocal cords as compared to males since birth. Then at puberty, the rise in the testosterone level causes the larynx to enlarge, and that changes your voice. Over time, the vocal cords thicken and tighten, which creates a vibration in sound along with deeper resonance. For females, the cords do not get tight, which results in a high pitch in the female voice.

2. Structure of Anomalies

The structure of anomalies is referred to as cleft palates deviated spectrum. Anomalies affect the clearness that is in a person’s voice. The structure of one’s voice can be altered by the age, overall health, cleanliness, and emotional state of a person. Alongside the texture of sound, pitch and timbre can also change your voice.

3. Body Structure

Bodyweight plays a vital role in changing voice. Obese men produce excessive estrogen that causes a rise in their voices. On the contrary, obese women have excessive testosterone that makes their voice deeper than others. Being obese makes the breath control better that results in generating a raspy sound.

4. Height

Underweight people have less endurance which increases the chance of injury to vocal cords. In comparison, heightened people have comparatively bigger lungs and larger lower airways, causing them to produce deeper voices compared to short people.

5. Heredity

Heredity and genetics play an important role in shaping your voice as it is a part of your anatomy too. Genetics is why you might find people from the same family have similar voices. Sound is made by the vocal cords that are in the larynx. The larynx is given a genetic code, which alters itself over time. These alterations, as a reaction, change your voice.

Part 2. How to Change Your Voice in Practice?

There are multiple reasons why someone wants to change their voice. Someone might not be satisfied with their low pitch voice or want to have a deeper voice. At the same time, you might also want to change your voice to any frictional character. Or you might want to change your voice to Morgan freeman too.

The real question is ‘Can you change your voice?’. Yes, it is possible. There are a lot of ways to do it, but they differ in complexity and effectiveness. You can either use any voice changer, or else you can also choose the natural way, which is a long-term approach. A few ways to change your voice in practice are discussed below:

Change the Way you Talk

Expressions change the emotions that affect the voice. Nasal and non-nasal voices differ as the nasal voices have a higher pitch as compared to non-nasal sounds. Changing the accent also affects the voice. The voice apparently stays the same, but the hearings of words change to make others feel the change of voice—for example, American and British accents.

Taking Care of Vocal Cords

Taking care of vocal cords can help change your voice. Smoking causes loss of voice and lowers the range of voice. Screaming can damage the vocal cords that automatically affects the voice. Breathing in polluted air not only changes the voice but also damages the vocal cords.

Vocal Exercises

There are some exercises that relax the vocal cords. These exercises include massaging the throat to loosen tense muscles, humming, taking deep breaths. Another exercise is loosening the jaw by opening it wide and closing it gently. Lip buzzing, yawning, and tongue trills are also considered exercises for vocal cords that can change your voice.

Part 3. How to Change Your Voice with Voice Changer Apps?

As we mentioned earlier that there are various ways to change your voice. Now that we have talked about some factors to sound unique and some practices to change your voice, it’s time to learn about voice changer apps. So, are you ready to learn about voice changers with effects to change your voice?

Windows & Mac Voice Changer Apps

When we talk about voice changer apps, different apps are available for Windows, and Mac. These applications provide different and unique features, making it fun to use the voice changer. Using a voice changer with effects can add different sound effects to your voice and modify it.

Moreover, voice changer apps allow you to change your voice on various gaming platforms. Not just this, but you can also have fun because some voice changers work perfectly with Zoom Meetings, Google Meet, etc. Let us share some great voice changers with you.

• AV Voice Changer
• MorphVox
• Clownfish Voice Changer
• VoiceMod

Android & iOS Voice Changer Apps

For mobile users, there is a wide range of amazing voice changers. Both Android and iOS users can enjoy the services and benefit from the voice-changing apps. You can record your voice and then add cool effects to it. Or else, you can listen and choose your favorite sound effect and then record your voice.

Do you want to know an exciting thing? Well, with these voice changers, you can prank you’re your friends and family by adding different voice effects and having fun. Let us share a few Android voice changers:

• MagicCall
• Prank Dial

What about iOS users? Don’t worry; given below are the voice changers that are best for iOS devices:

• Voice Changer Plus
• Call Voice Changer – IntCall

The Bottom Line

After reading this article, pranking your friends and speaking with a unique voice will never be a problem for you. We have discussed in detail various factors that aid in making you sound unique. Moreover, we also shared some practices that can completely change your voice.

02 How to Change Your Voice in Practice?

03 How to Change Your Voice with Voice Changer Apps?

Part 1. What Factors Make Your Sound Unique and Special?

Naturally, a person’s voice changes with time. Although time is not only the reason, the environment also plays an essential role in changing voice. The environment has a significant effect on the way someone walks, talks, or even how someone acts on something. There are various factors upon which your voice sounds unique and special; some of these factors are briefly discussed below:

1. Gender

Females have small vocal cords as compared to males since birth. Then at puberty, the rise in the testosterone level causes the larynx to enlarge, and that changes your voice. Over time, the vocal cords thicken and tighten, which creates a vibration in sound along with deeper resonance. For females, the cords do not get tight, which results in a high pitch in the female voice.

2. Structure of Anomalies

The structure of anomalies is referred to as cleft palates deviated spectrum. Anomalies affect the clearness that is in a person’s voice. The structure of one’s voice can be altered by the age, overall health, cleanliness, and emotional state of a person. Alongside the texture of sound, pitch and timbre can also change your voice.

3. Body Structure

Bodyweight plays a vital role in changing voice. Obese men produce excessive estrogen that causes a rise in their voices. On the contrary, obese women have excessive testosterone that makes their voice deeper than others. Being obese makes the breath control better that results in generating a raspy sound.

4. Height

Underweight people have less endurance which increases the chance of injury to vocal cords. In comparison, heightened people have comparatively bigger lungs and larger lower airways, causing them to produce deeper voices compared to short people.

5. Heredity

Heredity and genetics play an important role in shaping your voice as it is a part of your anatomy too. Genetics is why you might find people from the same family have similar voices. Sound is made by the vocal cords that are in the larynx. The larynx is given a genetic code, which alters itself over time. These alterations, as a reaction, change your voice.

Part 2. How to Change Your Voice in Practice?

There are multiple reasons why someone wants to change their voice. Someone might not be satisfied with their low pitch voice or want to have a deeper voice. At the same time, you might also want to change your voice to any frictional character. Or you might want to change your voice to Morgan freeman too.

The real question is ‘Can you change your voice?’. Yes, it is possible. There are a lot of ways to do it, but they differ in complexity and effectiveness. You can either use any voice changer, or else you can also choose the natural way, which is a long-term approach. A few ways to change your voice in practice are discussed below:

Change the Way you Talk

Expressions change the emotions that affect the voice. Nasal and non-nasal voices differ as the nasal voices have a higher pitch as compared to non-nasal sounds. Changing the accent also affects the voice. The voice apparently stays the same, but the hearings of words change to make others feel the change of voice—for example, American and British accents.

Taking Care of Vocal Cords

Taking care of vocal cords can help change your voice. Smoking causes loss of voice and lowers the range of voice. Screaming can damage the vocal cords that automatically affects the voice. Breathing in polluted air not only changes the voice but also damages the vocal cords.

Vocal Exercises

There are some exercises that relax the vocal cords. These exercises include massaging the throat to loosen tense muscles, humming, taking deep breaths. Another exercise is loosening the jaw by opening it wide and closing it gently. Lip buzzing, yawning, and tongue trills are also considered exercises for vocal cords that can change your voice.

Part 3. How to Change Your Voice with Voice Changer Apps?

As we mentioned earlier that there are various ways to change your voice. Now that we have talked about some factors to sound unique and some practices to change your voice, it’s time to learn about voice changer apps. So, are you ready to learn about voice changers with effects to change your voice?

Windows & Mac Voice Changer Apps

When we talk about voice changer apps, different apps are available for Windows, and Mac. These applications provide different and unique features, making it fun to use the voice changer. Using a voice changer with effects can add different sound effects to your voice and modify it.

Moreover, voice changer apps allow you to change your voice on various gaming platforms. Not just this, but you can also have fun because some voice changers work perfectly with Zoom Meetings, Google Meet, etc. Let us share some great voice changers with you.

• AV Voice Changer
• MorphVox
• Clownfish Voice Changer
• VoiceMod

Android & iOS Voice Changer Apps

For mobile users, there is a wide range of amazing voice changers. Both Android and iOS users can enjoy the services and benefit from the voice-changing apps. You can record your voice and then add cool effects to it. Or else, you can listen and choose your favorite sound effect and then record your voice.

Do you want to know an exciting thing? Well, with these voice changers, you can prank you’re your friends and family by adding different voice effects and having fun. Let us share a few Android voice changers:

• MagicCall
• Prank Dial

What about iOS users? Don’t worry; given below are the voice changers that are best for iOS devices:

• Voice Changer Plus
• Call Voice Changer – IntCall

The Bottom Line

After reading this article, pranking your friends and speaking with a unique voice will never be a problem for you. We have discussed in detail various factors that aid in making you sound unique. Moreover, we also shared some practices that can completely change your voice.

02 How to Change Your Voice in Practice?

03 How to Change Your Voice with Voice Changer Apps?

Part 1. What Factors Make Your Sound Unique and Special?

Naturally, a person’s voice changes with time. Although time is not only the reason, the environment also plays an essential role in changing voice. The environment has a significant effect on the way someone walks, talks, or even how someone acts on something. There are various factors upon which your voice sounds unique and special; some of these factors are briefly discussed below:

1. Gender

Females have small vocal cords as compared to males since birth. Then at puberty, the rise in the testosterone level causes the larynx to enlarge, and that changes your voice. Over time, the vocal cords thicken and tighten, which creates a vibration in sound along with deeper resonance. For females, the cords do not get tight, which results in a high pitch in the female voice.

2. Structure of Anomalies

The structure of anomalies is referred to as cleft palates deviated spectrum. Anomalies affect the clearness that is in a person’s voice. The structure of one’s voice can be altered by the age, overall health, cleanliness, and emotional state of a person. Alongside the texture of sound, pitch and timbre can also change your voice.

3. Body Structure

Bodyweight plays a vital role in changing voice. Obese men produce excessive estrogen that causes a rise in their voices. On the contrary, obese women have excessive testosterone that makes their voice deeper than others. Being obese makes the breath control better that results in generating a raspy sound.

4. Height

Underweight people have less endurance which increases the chance of injury to vocal cords. In comparison, heightened people have comparatively bigger lungs and larger lower airways, causing them to produce deeper voices compared to short people.

5. Heredity

Heredity and genetics play an important role in shaping your voice as it is a part of your anatomy too. Genetics is why you might find people from the same family have similar voices. Sound is made by the vocal cords that are in the larynx. The larynx is given a genetic code, which alters itself over time. These alterations, as a reaction, change your voice.

Part 2. How to Change Your Voice in Practice?

There are multiple reasons why someone wants to change their voice. Someone might not be satisfied with their low pitch voice or want to have a deeper voice. At the same time, you might also want to change your voice to any frictional character. Or you might want to change your voice to Morgan freeman too.

The real question is ‘Can you change your voice?’. Yes, it is possible. There are a lot of ways to do it, but they differ in complexity and effectiveness. You can either use any voice changer, or else you can also choose the natural way, which is a long-term approach. A few ways to change your voice in practice are discussed below:

Change the Way you Talk

Expressions change the emotions that affect the voice. Nasal and non-nasal voices differ as the nasal voices have a higher pitch as compared to non-nasal sounds. Changing the accent also affects the voice. The voice apparently stays the same, but the hearings of words change to make others feel the change of voice—for example, American and British accents.

Taking Care of Vocal Cords

Taking care of vocal cords can help change your voice. Smoking causes loss of voice and lowers the range of voice. Screaming can damage the vocal cords that automatically affects the voice. Breathing in polluted air not only changes the voice but also damages the vocal cords.

Vocal Exercises

There are some exercises that relax the vocal cords. These exercises include massaging the throat to loosen tense muscles, humming, taking deep breaths. Another exercise is loosening the jaw by opening it wide and closing it gently. Lip buzzing, yawning, and tongue trills are also considered exercises for vocal cords that can change your voice.

Part 3. How to Change Your Voice with Voice Changer Apps?

As we mentioned earlier that there are various ways to change your voice. Now that we have talked about some factors to sound unique and some practices to change your voice, it’s time to learn about voice changer apps. So, are you ready to learn about voice changers with effects to change your voice?

Windows & Mac Voice Changer Apps

When we talk about voice changer apps, different apps are available for Windows, and Mac. These applications provide different and unique features, making it fun to use the voice changer. Using a voice changer with effects can add different sound effects to your voice and modify it.

Moreover, voice changer apps allow you to change your voice on various gaming platforms. Not just this, but you can also have fun because some voice changers work perfectly with Zoom Meetings, Google Meet, etc. Let us share some great voice changers with you.

• AV Voice Changer
• MorphVox
• Clownfish Voice Changer
• VoiceMod

Android & iOS Voice Changer Apps

For mobile users, there is a wide range of amazing voice changers. Both Android and iOS users can enjoy the services and benefit from the voice-changing apps. You can record your voice and then add cool effects to it. Or else, you can listen and choose your favorite sound effect and then record your voice.

Do you want to know an exciting thing? Well, with these voice changers, you can prank you’re your friends and family by adding different voice effects and having fun. Let us share a few Android voice changers:

• MagicCall
• Prank Dial

What about iOS users? Don’t worry; given below are the voice changers that are best for iOS devices:

• Voice Changer Plus
• Call Voice Changer – IntCall

The Bottom Line

After reading this article, pranking your friends and speaking with a unique voice will never be a problem for you. We have discussed in detail various factors that aid in making you sound unique. Moreover, we also shared some practices that can completely change your voice.

02 How to Change Your Voice in Practice?

03 How to Change Your Voice with Voice Changer Apps?

Part 1. What Factors Make Your Sound Unique and Special?

Naturally, a person’s voice changes with time. Although time is not only the reason, the environment also plays an essential role in changing voice. The environment has a significant effect on the way someone walks, talks, or even how someone acts on something. There are various factors upon which your voice sounds unique and special; some of these factors are briefly discussed below:

1. Gender

Females have small vocal cords as compared to males since birth. Then at puberty, the rise in the testosterone level causes the larynx to enlarge, and that changes your voice. Over time, the vocal cords thicken and tighten, which creates a vibration in sound along with deeper resonance. For females, the cords do not get tight, which results in a high pitch in the female voice.

2. Structure of Anomalies

The structure of anomalies is referred to as cleft palates deviated spectrum. Anomalies affect the clearness that is in a person’s voice. The structure of one’s voice can be altered by the age, overall health, cleanliness, and emotional state of a person. Alongside the texture of sound, pitch and timbre can also change your voice.

3. Body Structure

Bodyweight plays a vital role in changing voice. Obese men produce excessive estrogen that causes a rise in their voices. On the contrary, obese women have excessive testosterone that makes their voice deeper than others. Being obese makes the breath control better that results in generating a raspy sound.

4. Height

Underweight people have less endurance which increases the chance of injury to vocal cords. In comparison, heightened people have comparatively bigger lungs and larger lower airways, causing them to produce deeper voices compared to short people.

5. Heredity

Heredity and genetics play an important role in shaping your voice as it is a part of your anatomy too. Genetics is why you might find people from the same family have similar voices. Sound is made by the vocal cords that are in the larynx. The larynx is given a genetic code, which alters itself over time. These alterations, as a reaction, change your voice.

Part 2. How to Change Your Voice in Practice?

There are multiple reasons why someone wants to change their voice. Someone might not be satisfied with their low pitch voice or want to have a deeper voice. At the same time, you might also want to change your voice to any frictional character. Or you might want to change your voice to Morgan freeman too.

The real question is ‘Can you change your voice?’. Yes, it is possible. There are a lot of ways to do it, but they differ in complexity and effectiveness. You can either use any voice changer, or else you can also choose the natural way, which is a long-term approach. A few ways to change your voice in practice are discussed below:

Change the Way you Talk

Expressions change the emotions that affect the voice. Nasal and non-nasal voices differ as the nasal voices have a higher pitch as compared to non-nasal sounds. Changing the accent also affects the voice. The voice apparently stays the same, but the hearings of words change to make others feel the change of voice—for example, American and British accents.

Taking Care of Vocal Cords

Taking care of vocal cords can help change your voice. Smoking causes loss of voice and lowers the range of voice. Screaming can damage the vocal cords that automatically affects the voice. Breathing in polluted air not only changes the voice but also damages the vocal cords.

Vocal Exercises

There are some exercises that relax the vocal cords. These exercises include massaging the throat to loosen tense muscles, humming, taking deep breaths. Another exercise is loosening the jaw by opening it wide and closing it gently. Lip buzzing, yawning, and tongue trills are also considered exercises for vocal cords that can change your voice.

Part 3. How to Change Your Voice with Voice Changer Apps?

As we mentioned earlier that there are various ways to change your voice. Now that we have talked about some factors to sound unique and some practices to change your voice, it’s time to learn about voice changer apps. So, are you ready to learn about voice changers with effects to change your voice?

Windows & Mac Voice Changer Apps

When we talk about voice changer apps, different apps are available for Windows, and Mac. These applications provide different and unique features, making it fun to use the voice changer. Using a voice changer with effects can add different sound effects to your voice and modify it.

Moreover, voice changer apps allow you to change your voice on various gaming platforms. Not just this, but you can also have fun because some voice changers work perfectly with Zoom Meetings, Google Meet, etc. Let us share some great voice changers with you.

• AV Voice Changer
• MorphVox
• Clownfish Voice Changer
• VoiceMod

Android & iOS Voice Changer Apps

For mobile users, there is a wide range of amazing voice changers. Both Android and iOS users can enjoy the services and benefit from the voice-changing apps. You can record your voice and then add cool effects to it. Or else, you can listen and choose your favorite sound effect and then record your voice.

Do you want to know an exciting thing? Well, with these voice changers, you can prank you’re your friends and family by adding different voice effects and having fun. Let us share a few Android voice changers:

• MagicCall
• Prank Dial

What about iOS users? Don’t worry; given below are the voice changers that are best for iOS devices:

• Voice Changer Plus
• Call Voice Changer – IntCall

The Bottom Line

After reading this article, pranking your friends and speaking with a unique voice will never be a problem for you. We have discussed in detail various factors that aid in making you sound unique. Moreover, we also shared some practices that can completely change your voice.

Simplifying Vocal Alterations: The Audacity Technique

What does free open source audio software mean? Audacity voice changer is the answer. Along with being free, it is a cross-platform software, which means that it can be used with different software packages. Audacity is easy to use multi-track audio editing and recording software.

It has a simple and clean-looking interface for better user understandability. Audacity has plug-in support for multiple audio formats like LV2, AU, and VST. We will further discuss Audacity as an audio voice changer, and how to use the software under various conditions will also be discussed in the article.

In this article

01 How Can You Use Voice Changer in Audacity?

02 How to Change Pitch in Audacity?

03 How to Change Male Voice to Female Voice with Audacity?

04 How to Create Robot Voice in Audacity?

Part 1. How Can You Use Voice Changer in Audacity?

Voice changers are also commonly referred to as voice enhancers, which can completely change and transform your voice. You can pull pranks on friends with voice changers if you are bored. If you want to hide your identity, you can modify your voice and do that. With voice changers, you can change the tone and the pitch of your voice and add various voice effects.

Voice changer comes with a wide range of sound effects ranging from baby sound, kid, male, female, monster, demon, animal sounds, and a lot more than this. Some great voice changers include AV Voice Changer , MorphVOX Voice Changer , Voicemod , Clownfish Voice Changer , and others. Do you know that these voice changers can be used with Audacity? Let’s tell you how.

Step 1: If you are interested in using a voice changer in Audacity, start by downloading your favorite voice changer to your PC. Once done, install it and after successful installation, launch it.

Step 2: As we have mentioned earlier that you are offered various voice effects in voice changers, so after launching it, select your preferred voice effect, whether it be a baby voice, animal voice, or celebrity voice.

Step 3: On the other side, launch Audacity on your PC. Once it opens, you will see the top menu; just below that, a microphone icon will be seen. Tap on that icon so that the drop-down menu appears, there select the name of your voice changer.

Part 2. How to Change Pitch in Audacity?

Audacity, the audio voice changer, offers a ‘Change Pitch’ feature with which you can change the pitch of the audio without damaging its tempo. You can separately change the speed. With this feature, you can also adjust and play with the frequency and semitones.

The audio editor also features to estimate the starting pitch; for instance, if A3 is a quiet note, followed by a large and loud note like C4, Audacity will detect C4. In case both notes have the same volume, Audacity will detect A3. With Audacity, you also get the ‘To’ and ‘From’ controls if you plan to change the pitch manually. To learn more about changing pitch, follow the steps below:

Step 1: For changing pitch in Audacity, start by launching the software. After launching, you can either record the audio or else, from the ‘File’ section, you can also ‘Open’ any file from your device.

Step 2: Audacity lets you change the pitch of a whole file or else for a small portion as well. Now, to change the pitch of a small portion, click and drag the mouse along the recording. Or else, click on the name of the track to select it completely.

Step 3: After this, head over to the top menu and click on the ‘Effect’ section. A drop-down menu list will appear, locate and select the ‘Change Pitch’ option. You can either use the sliders to adjust the pitch or else write the percentage to change.

Step 4: You can preview the file and check how it sounds once done. When you are satisfied, hit the ‘OK’ button to save the changes. You can also adjust the Speed and Tempo of the track.

Part 3. How to Change Male Voice to Female Voice with Audacity?

The most fun voice transformation is from low pitch to higher pitch. In general, modifying the male voice to a female voice, as the male pitch has a negative value and changing it to a positive pitch, modifies your voice to a female voice. What else could be better to use than the amazing Audacity voice changer? Let’s share the steps that will help you change your male voice to female.

Step 1: First, start by opening the Audacity audio editor. Once it has launched successfully, you should import the audio file. You can record audio with Audacity. Along with this, you can also import files from your device from the ‘File’ section, followed by the ‘Open’ option.

Step 2: After your audio track is visible on the timeline, you have to select the part of the file that you want to edit. You can easily select it by clicking and dragging the mouse. If not this, you can also work with the whole track; for this, simply click on the track name to select it.

Step 3: After you are satisfied with the selection, head to the top menu and select the ‘Effects’ options. A drop-down list appears after this, and you have to look for the ‘Change Pitch’ option and select it.

Step 4: Normally, you can adjust the pitch by taking help from the sliders, but you can also change the pitch manually by adding a percentage. The male pitch originally will have a negative value; change it and set a positive value. You can keep changing until you are satisfied.

Step 5: Lastly, don’t forget to save the changes by hitting the ‘OK’ button at the button and saving the file to your respective device.

Part 4. How to Create Robot Voice in Audacity?

As we have mentioned, Audacity is an audio voice changer, so you must know that Audacity also can change your voice into a robotic voice. Among the different voices, the robot voice sounds interesting, and it’s fun to create. If you are excited to learn to create robot voice in Audacity, follow the guiding steps shared below:

Step 1: For creating an extraordinary robotic voice, start by launching Audacity on your device. After it opens, it’s time to record your voice to create a robot voice. Or else, head to the ‘File’ tab and import your audio file from your device to Audacity from the ‘Open’ option.

Step 2: After this, to start the editing, you need a stereo track on the timeline. For doing this, navigate ‘Tracks’ from the top menu and click on it. Next, hover on the ‘Add New’ option to open its sub-menu. You will see the ‘Stereo Track’ option, select it, and copy-paste the audio file in the new section.

Step 3: Let’s start with the fun part, the editing and adjusting different features. Start by opening the ‘Effects’ tab, and from the long list of options, select ‘Echo.’ There, you can enter the ‘Delay Time’ and change other fields as well.

Step 4: Preview the audio and move on to the next setting. Open the ‘Effects’ section and look for the ‘Change Pitch’ option. You can change and adjust the pitch according to your desire and preview the file again.

Step 5: For creating a robot voice, you can also set the tempo. For that, head to the ‘Change Tempo’ option under the ‘Effects’ section and set the value to minus. Keep adjusting the different effects until you get your perfect robot voice.

Bottom Line

Audacity is not only a great audio editor; it is also a stunning audio voice changer. The software comes with a lot of effects that can completely transform your voice to an unrecognizable level. You can sound like a robot, male, female, and whatever you want with Audacity voice changer. Do you know any video editor that offers sound effects?

If you don’t know, let us introduce Wondershare Filmora Video Editor . This wonderous software is loaded with many editing features to create the best videos. Not only trim, cut, crop, but the software also offers you features like split-screen, chroma key background, keyframing, color match, motion tracking, and whatnot.

Apart from this, this video editor is a hub for cool sound effects and editing elements from its media library, Filmstock. You get a wide range of sound effects, titles, transitions, and many more elements.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 How to Change Pitch in Audacity?

03 How to Change Male Voice to Female Voice with Audacity?

04 How to Create Robot Voice in Audacity?

Part 1. How Can You Use Voice Changer in Audacity?

Voice changers are also commonly referred to as voice enhancers, which can completely change and transform your voice. You can pull pranks on friends with voice changers if you are bored. If you want to hide your identity, you can modify your voice and do that. With voice changers, you can change the tone and the pitch of your voice and add various voice effects.

Voice changer comes with a wide range of sound effects ranging from baby sound, kid, male, female, monster, demon, animal sounds, and a lot more than this. Some great voice changers include AV Voice Changer , MorphVOX Voice Changer , Voicemod , Clownfish Voice Changer , and others. Do you know that these voice changers can be used with Audacity? Let’s tell you how.

Step 1: If you are interested in using a voice changer in Audacity, start by downloading your favorite voice changer to your PC. Once done, install it and after successful installation, launch it.

Step 2: As we have mentioned earlier that you are offered various voice effects in voice changers, so after launching it, select your preferred voice effect, whether it be a baby voice, animal voice, or celebrity voice.

Step 3: On the other side, launch Audacity on your PC. Once it opens, you will see the top menu; just below that, a microphone icon will be seen. Tap on that icon so that the drop-down menu appears, there select the name of your voice changer.

Part 2. How to Change Pitch in Audacity?

Audacity, the audio voice changer, offers a ‘Change Pitch’ feature with which you can change the pitch of the audio without damaging its tempo. You can separately change the speed. With this feature, you can also adjust and play with the frequency and semitones.

The audio editor also features to estimate the starting pitch; for instance, if A3 is a quiet note, followed by a large and loud note like C4, Audacity will detect C4. In case both notes have the same volume, Audacity will detect A3. With Audacity, you also get the ‘To’ and ‘From’ controls if you plan to change the pitch manually. To learn more about changing pitch, follow the steps below:

Step 1: For changing pitch in Audacity, start by launching the software. After launching, you can either record the audio or else, from the ‘File’ section, you can also ‘Open’ any file from your device.

Step 2: Audacity lets you change the pitch of a whole file or else for a small portion as well. Now, to change the pitch of a small portion, click and drag the mouse along the recording. Or else, click on the name of the track to select it completely.

Step 3: After this, head over to the top menu and click on the ‘Effect’ section. A drop-down menu list will appear, locate and select the ‘Change Pitch’ option. You can either use the sliders to adjust the pitch or else write the percentage to change.

Step 4: You can preview the file and check how it sounds once done. When you are satisfied, hit the ‘OK’ button to save the changes. You can also adjust the Speed and Tempo of the track.

Part 3. How to Change Male Voice to Female Voice with Audacity?

The most fun voice transformation is from low pitch to higher pitch. In general, modifying the male voice to a female voice, as the male pitch has a negative value and changing it to a positive pitch, modifies your voice to a female voice. What else could be better to use than the amazing Audacity voice changer? Let’s share the steps that will help you change your male voice to female.

Step 1: First, start by opening the Audacity audio editor. Once it has launched successfully, you should import the audio file. You can record audio with Audacity. Along with this, you can also import files from your device from the ‘File’ section, followed by the ‘Open’ option.

Step 2: After your audio track is visible on the timeline, you have to select the part of the file that you want to edit. You can easily select it by clicking and dragging the mouse. If not this, you can also work with the whole track; for this, simply click on the track name to select it.

Step 3: After you are satisfied with the selection, head to the top menu and select the ‘Effects’ options. A drop-down list appears after this, and you have to look for the ‘Change Pitch’ option and select it.

Step 4: Normally, you can adjust the pitch by taking help from the sliders, but you can also change the pitch manually by adding a percentage. The male pitch originally will have a negative value; change it and set a positive value. You can keep changing until you are satisfied.

Step 5: Lastly, don’t forget to save the changes by hitting the ‘OK’ button at the button and saving the file to your respective device.

Part 4. How to Create Robot Voice in Audacity?

As we have mentioned, Audacity is an audio voice changer, so you must know that Audacity also can change your voice into a robotic voice. Among the different voices, the robot voice sounds interesting, and it’s fun to create. If you are excited to learn to create robot voice in Audacity, follow the guiding steps shared below:

Step 1: For creating an extraordinary robotic voice, start by launching Audacity on your device. After it opens, it’s time to record your voice to create a robot voice. Or else, head to the ‘File’ tab and import your audio file from your device to Audacity from the ‘Open’ option.

Step 2: After this, to start the editing, you need a stereo track on the timeline. For doing this, navigate ‘Tracks’ from the top menu and click on it. Next, hover on the ‘Add New’ option to open its sub-menu. You will see the ‘Stereo Track’ option, select it, and copy-paste the audio file in the new section.

Step 3: Let’s start with the fun part, the editing and adjusting different features. Start by opening the ‘Effects’ tab, and from the long list of options, select ‘Echo.’ There, you can enter the ‘Delay Time’ and change other fields as well.

Step 4: Preview the audio and move on to the next setting. Open the ‘Effects’ section and look for the ‘Change Pitch’ option. You can change and adjust the pitch according to your desire and preview the file again.

Step 5: For creating a robot voice, you can also set the tempo. For that, head to the ‘Change Tempo’ option under the ‘Effects’ section and set the value to minus. Keep adjusting the different effects until you get your perfect robot voice.

Bottom Line

Audacity is not only a great audio editor; it is also a stunning audio voice changer. The software comes with a lot of effects that can completely transform your voice to an unrecognizable level. You can sound like a robot, male, female, and whatever you want with Audacity voice changer. Do you know any video editor that offers sound effects?

If you don’t know, let us introduce Wondershare Filmora Video Editor . This wonderous software is loaded with many editing features to create the best videos. Not only trim, cut, crop, but the software also offers you features like split-screen, chroma key background, keyframing, color match, motion tracking, and whatnot.

Apart from this, this video editor is a hub for cool sound effects and editing elements from its media library, Filmstock. You get a wide range of sound effects, titles, transitions, and many more elements.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 How to Change Pitch in Audacity?

03 How to Change Male Voice to Female Voice with Audacity?

04 How to Create Robot Voice in Audacity?

Part 1. How Can You Use Voice Changer in Audacity?

Voice changers are also commonly referred to as voice enhancers, which can completely change and transform your voice. You can pull pranks on friends with voice changers if you are bored. If you want to hide your identity, you can modify your voice and do that. With voice changers, you can change the tone and the pitch of your voice and add various voice effects.

Voice changer comes with a wide range of sound effects ranging from baby sound, kid, male, female, monster, demon, animal sounds, and a lot more than this. Some great voice changers include AV Voice Changer , MorphVOX Voice Changer , Voicemod , Clownfish Voice Changer , and others. Do you know that these voice changers can be used with Audacity? Let’s tell you how.

Step 1: If you are interested in using a voice changer in Audacity, start by downloading your favorite voice changer to your PC. Once done, install it and after successful installation, launch it.

Step 2: As we have mentioned earlier that you are offered various voice effects in voice changers, so after launching it, select your preferred voice effect, whether it be a baby voice, animal voice, or celebrity voice.

Step 3: On the other side, launch Audacity on your PC. Once it opens, you will see the top menu; just below that, a microphone icon will be seen. Tap on that icon so that the drop-down menu appears, there select the name of your voice changer.

Part 2. How to Change Pitch in Audacity?

Audacity, the audio voice changer, offers a ‘Change Pitch’ feature with which you can change the pitch of the audio without damaging its tempo. You can separately change the speed. With this feature, you can also adjust and play with the frequency and semitones.

The audio editor also features to estimate the starting pitch; for instance, if A3 is a quiet note, followed by a large and loud note like C4, Audacity will detect C4. In case both notes have the same volume, Audacity will detect A3. With Audacity, you also get the ‘To’ and ‘From’ controls if you plan to change the pitch manually. To learn more about changing pitch, follow the steps below:

Step 1: For changing pitch in Audacity, start by launching the software. After launching, you can either record the audio or else, from the ‘File’ section, you can also ‘Open’ any file from your device.

Step 2: Audacity lets you change the pitch of a whole file or else for a small portion as well. Now, to change the pitch of a small portion, click and drag the mouse along the recording. Or else, click on the name of the track to select it completely.

Step 3: After this, head over to the top menu and click on the ‘Effect’ section. A drop-down menu list will appear, locate and select the ‘Change Pitch’ option. You can either use the sliders to adjust the pitch or else write the percentage to change.

Step 4: You can preview the file and check how it sounds once done. When you are satisfied, hit the ‘OK’ button to save the changes. You can also adjust the Speed and Tempo of the track.

Part 3. How to Change Male Voice to Female Voice with Audacity?

The most fun voice transformation is from low pitch to higher pitch. In general, modifying the male voice to a female voice, as the male pitch has a negative value and changing it to a positive pitch, modifies your voice to a female voice. What else could be better to use than the amazing Audacity voice changer? Let’s share the steps that will help you change your male voice to female.

Step 1: First, start by opening the Audacity audio editor. Once it has launched successfully, you should import the audio file. You can record audio with Audacity. Along with this, you can also import files from your device from the ‘File’ section, followed by the ‘Open’ option.

Step 2: After your audio track is visible on the timeline, you have to select the part of the file that you want to edit. You can easily select it by clicking and dragging the mouse. If not this, you can also work with the whole track; for this, simply click on the track name to select it.

Step 3: After you are satisfied with the selection, head to the top menu and select the ‘Effects’ options. A drop-down list appears after this, and you have to look for the ‘Change Pitch’ option and select it.

Step 4: Normally, you can adjust the pitch by taking help from the sliders, but you can also change the pitch manually by adding a percentage. The male pitch originally will have a negative value; change it and set a positive value. You can keep changing until you are satisfied.

Step 5: Lastly, don’t forget to save the changes by hitting the ‘OK’ button at the button and saving the file to your respective device.

Part 4. How to Create Robot Voice in Audacity?

As we have mentioned, Audacity is an audio voice changer, so you must know that Audacity also can change your voice into a robotic voice. Among the different voices, the robot voice sounds interesting, and it’s fun to create. If you are excited to learn to create robot voice in Audacity, follow the guiding steps shared below:

Step 1: For creating an extraordinary robotic voice, start by launching Audacity on your device. After it opens, it’s time to record your voice to create a robot voice. Or else, head to the ‘File’ tab and import your audio file from your device to Audacity from the ‘Open’ option.

Step 2: After this, to start the editing, you need a stereo track on the timeline. For doing this, navigate ‘Tracks’ from the top menu and click on it. Next, hover on the ‘Add New’ option to open its sub-menu. You will see the ‘Stereo Track’ option, select it, and copy-paste the audio file in the new section.

Step 3: Let’s start with the fun part, the editing and adjusting different features. Start by opening the ‘Effects’ tab, and from the long list of options, select ‘Echo.’ There, you can enter the ‘Delay Time’ and change other fields as well.

Step 4: Preview the audio and move on to the next setting. Open the ‘Effects’ section and look for the ‘Change Pitch’ option. You can change and adjust the pitch according to your desire and preview the file again.

Step 5: For creating a robot voice, you can also set the tempo. For that, head to the ‘Change Tempo’ option under the ‘Effects’ section and set the value to minus. Keep adjusting the different effects until you get your perfect robot voice.

Bottom Line

Audacity is not only a great audio editor; it is also a stunning audio voice changer. The software comes with a lot of effects that can completely transform your voice to an unrecognizable level. You can sound like a robot, male, female, and whatever you want with Audacity voice changer. Do you know any video editor that offers sound effects?

If you don’t know, let us introduce Wondershare Filmora Video Editor . This wonderous software is loaded with many editing features to create the best videos. Not only trim, cut, crop, but the software also offers you features like split-screen, chroma key background, keyframing, color match, motion tracking, and whatnot.

Apart from this, this video editor is a hub for cool sound effects and editing elements from its media library, Filmstock. You get a wide range of sound effects, titles, transitions, and many more elements.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 How to Change Pitch in Audacity?

03 How to Change Male Voice to Female Voice with Audacity?

04 How to Create Robot Voice in Audacity?

Part 1. How Can You Use Voice Changer in Audacity?

Voice changers are also commonly referred to as voice enhancers, which can completely change and transform your voice. You can pull pranks on friends with voice changers if you are bored. If you want to hide your identity, you can modify your voice and do that. With voice changers, you can change the tone and the pitch of your voice and add various voice effects.

Voice changer comes with a wide range of sound effects ranging from baby sound, kid, male, female, monster, demon, animal sounds, and a lot more than this. Some great voice changers include AV Voice Changer , MorphVOX Voice Changer , Voicemod , Clownfish Voice Changer , and others. Do you know that these voice changers can be used with Audacity? Let’s tell you how.

Step 1: If you are interested in using a voice changer in Audacity, start by downloading your favorite voice changer to your PC. Once done, install it and after successful installation, launch it.

Step 2: As we have mentioned earlier that you are offered various voice effects in voice changers, so after launching it, select your preferred voice effect, whether it be a baby voice, animal voice, or celebrity voice.

Step 3: On the other side, launch Audacity on your PC. Once it opens, you will see the top menu; just below that, a microphone icon will be seen. Tap on that icon so that the drop-down menu appears, there select the name of your voice changer.

Part 2. How to Change Pitch in Audacity?

Audacity, the audio voice changer, offers a ‘Change Pitch’ feature with which you can change the pitch of the audio without damaging its tempo. You can separately change the speed. With this feature, you can also adjust and play with the frequency and semitones.

The audio editor also features to estimate the starting pitch; for instance, if A3 is a quiet note, followed by a large and loud note like C4, Audacity will detect C4. In case both notes have the same volume, Audacity will detect A3. With Audacity, you also get the ‘To’ and ‘From’ controls if you plan to change the pitch manually. To learn more about changing pitch, follow the steps below:

Step 1: For changing pitch in Audacity, start by launching the software. After launching, you can either record the audio or else, from the ‘File’ section, you can also ‘Open’ any file from your device.

Step 2: Audacity lets you change the pitch of a whole file or else for a small portion as well. Now, to change the pitch of a small portion, click and drag the mouse along the recording. Or else, click on the name of the track to select it completely.

Step 3: After this, head over to the top menu and click on the ‘Effect’ section. A drop-down menu list will appear, locate and select the ‘Change Pitch’ option. You can either use the sliders to adjust the pitch or else write the percentage to change.

Step 4: You can preview the file and check how it sounds once done. When you are satisfied, hit the ‘OK’ button to save the changes. You can also adjust the Speed and Tempo of the track.

Part 3. How to Change Male Voice to Female Voice with Audacity?

The most fun voice transformation is from low pitch to higher pitch. In general, modifying the male voice to a female voice, as the male pitch has a negative value and changing it to a positive pitch, modifies your voice to a female voice. What else could be better to use than the amazing Audacity voice changer? Let’s share the steps that will help you change your male voice to female.

Step 1: First, start by opening the Audacity audio editor. Once it has launched successfully, you should import the audio file. You can record audio with Audacity. Along with this, you can also import files from your device from the ‘File’ section, followed by the ‘Open’ option.

Step 2: After your audio track is visible on the timeline, you have to select the part of the file that you want to edit. You can easily select it by clicking and dragging the mouse. If not this, you can also work with the whole track; for this, simply click on the track name to select it.

Step 3: After you are satisfied with the selection, head to the top menu and select the ‘Effects’ options. A drop-down list appears after this, and you have to look for the ‘Change Pitch’ option and select it.

Step 4: Normally, you can adjust the pitch by taking help from the sliders, but you can also change the pitch manually by adding a percentage. The male pitch originally will have a negative value; change it and set a positive value. You can keep changing until you are satisfied.

Step 5: Lastly, don’t forget to save the changes by hitting the ‘OK’ button at the button and saving the file to your respective device.

Part 4. How to Create Robot Voice in Audacity?

As we have mentioned, Audacity is an audio voice changer, so you must know that Audacity also can change your voice into a robotic voice. Among the different voices, the robot voice sounds interesting, and it’s fun to create. If you are excited to learn to create robot voice in Audacity, follow the guiding steps shared below:

Step 1: For creating an extraordinary robotic voice, start by launching Audacity on your device. After it opens, it’s time to record your voice to create a robot voice. Or else, head to the ‘File’ tab and import your audio file from your device to Audacity from the ‘Open’ option.

Step 2: After this, to start the editing, you need a stereo track on the timeline. For doing this, navigate ‘Tracks’ from the top menu and click on it. Next, hover on the ‘Add New’ option to open its sub-menu. You will see the ‘Stereo Track’ option, select it, and copy-paste the audio file in the new section.

Step 3: Let’s start with the fun part, the editing and adjusting different features. Start by opening the ‘Effects’ tab, and from the long list of options, select ‘Echo.’ There, you can enter the ‘Delay Time’ and change other fields as well.

Step 4: Preview the audio and move on to the next setting. Open the ‘Effects’ section and look for the ‘Change Pitch’ option. You can change and adjust the pitch according to your desire and preview the file again.

Step 5: For creating a robot voice, you can also set the tempo. For that, head to the ‘Change Tempo’ option under the ‘Effects’ section and set the value to minus. Keep adjusting the different effects until you get your perfect robot voice.

Bottom Line

Audacity is not only a great audio editor; it is also a stunning audio voice changer. The software comes with a lot of effects that can completely transform your voice to an unrecognizable level. You can sound like a robot, male, female, and whatever you want with Audacity voice changer. Do you know any video editor that offers sound effects?

If you don’t know, let us introduce Wondershare Filmora Video Editor . This wonderous software is loaded with many editing features to create the best videos. Not only trim, cut, crop, but the software also offers you features like split-screen, chroma key background, keyframing, color match, motion tracking, and whatnot.

Apart from this, this video editor is a hub for cool sound effects and editing elements from its media library, Filmstock. You get a wide range of sound effects, titles, transitions, and many more elements.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

The Ultimate Process: Rewiring Audio in Film Projects

Video editing is inclusive of editing the audio track. You may be working on background scores, original soundtracks, and different kinds of sound effects. These tasks would need you to edit or replace audio in the video. You may have to mix other audio tracks to have one score. From sound engineering to finely editing every track being mixed, it is an ever expanding and exciting technical niche that will depend largely on a plethora of tools, so in this article, we will let you how to replace audio in video with 2 methods by using Filmora and Windows Movie Maker.

In this article

01 How to replace audio in video with Filmora

02 How to change audio in video with Windows Movie Maker

Part 1: How to replace audio in video with Filmora

The first method, let us explore how you can replace audio in video with Wondershare Filmora.

To begin with, get a free trial copy of Wondershare Filmora .

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1. Import file

Open the application and click ‘ Import once you have downloaded and installed Wondershare Filmora. Please search for the relevant video you wish to edit and load it from the hard disk or the specific folder. You can select multiple videos using ‘ctrl’ and clicking on the chosen files.

Step 2. Drag and drop to the video Timeline

The videos selected will be displayed as thumbnails. Choose a video, hit and click without releasing the click and drag the chosen video to the Video Timeline.

Step 3. Remove the original sound of the video

Right-click on it, and you would see the option of “Audio detach.” Click on it, and the audio file will detach from the video file and get added to Music Timeline.

Press “Delete” on your keyboard, and you will get rid of it. You can save this video without the audio, and you would only have the visuals, unimpaired and unaffected in any way, without the sound.

Step 4. Add a new audio track

You can add a new audio track to the video by choosing royalty sound or music from the Filmora library or importing any audio you like.

Part 2: How to change audio in video with Windows Movie Maker

The second method, Apart from replacing audio by Filmora, you can also make it by Windows Movie Maker. Though it is discontinued to develop a new version, you can still use it in Windows 7. Below are the steps to replace audio in Windows Movie Maker .

Step 1: Import video

First, download and run it. Click Add videos and photos to import video.

Step 2: Turn off the original sound

Click Edit tab > Video volume to turn off the sound by draging the slider to the left.

Step 3: Add audio to video

Click Add music to import the targeted music to Windows Movie Maker. You can select Add music or Add music at the current point.

Step 4: Save project

Click the file icon in the top left corner to save the video. Choose Save movie to export the targeted file.

Wondershare Filmora allows you to replace easily and edit the audio in the video

Unfortunately, no application by default on your desktop or laptop, phone, or tablet would get this done. To replace audio in the video, you would need the help of state of the art software. Fortunately, you have Wondershare Filmora at your disposal.

With Wondershare Filmora, you can replace audio in the video, mute audio, detach the audio, and add audio. You can eliminate background noise, organic noise, sound effects, address the sync problem in a video file, and edit the audio in a video without any extensive training or expertise.

• It has a user-friendly interface which makes things simple even for amateurs.
• It supports all common video and audio formats, including WMV, MOV, FLV, MTS, MP4, etc.
• You can move audio, replace it or add new audio to the video without worrying about general loss, which is loss of quality.
• You can export the edited video with the new or edited audio to various devices, including the cloud and social media sites.
• Compatible with Windows (including Windows 8) & Mac OS X (10.6 and above).

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 How to change audio in video with Windows Movie Maker

Part 1: How to replace audio in video with Filmora

The first method, let us explore how you can replace audio in video with Wondershare Filmora.

To begin with, get a free trial copy of Wondershare Filmora .

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1. Import file

Open the application and click ‘ Import once you have downloaded and installed Wondershare Filmora. Please search for the relevant video you wish to edit and load it from the hard disk or the specific folder. You can select multiple videos using ‘ctrl’ and clicking on the chosen files.

Step 2. Drag and drop to the video Timeline

The videos selected will be displayed as thumbnails. Choose a video, hit and click without releasing the click and drag the chosen video to the Video Timeline.

Step 3. Remove the original sound of the video

Right-click on it, and you would see the option of “Audio detach.” Click on it, and the audio file will detach from the video file and get added to Music Timeline.

Press “Delete” on your keyboard, and you will get rid of it. You can save this video without the audio, and you would only have the visuals, unimpaired and unaffected in any way, without the sound.

Step 4. Add a new audio track

You can add a new audio track to the video by choosing royalty sound or music from the Filmora library or importing any audio you like.

Part 2: How to change audio in video with Windows Movie Maker

The second method, Apart from replacing audio by Filmora, you can also make it by Windows Movie Maker. Though it is discontinued to develop a new version, you can still use it in Windows 7. Below are the steps to replace audio in Windows Movie Maker .

Step 1: Import video

First, download and run it. Click Add videos and photos to import video.

Step 2: Turn off the original sound

Click Edit tab > Video volume to turn off the sound by draging the slider to the left.

Step 3: Add audio to video

Click Add music to import the targeted music to Windows Movie Maker. You can select Add music or Add music at the current point.

Step 4: Save project

Click the file icon in the top left corner to save the video. Choose Save movie to export the targeted file.

Wondershare Filmora allows you to replace easily and edit the audio in the video

Unfortunately, no application by default on your desktop or laptop, phone, or tablet would get this done. To replace audio in the video, you would need the help of state of the art software. Fortunately, you have Wondershare Filmora at your disposal.

With Wondershare Filmora, you can replace audio in the video, mute audio, detach the audio, and add audio. You can eliminate background noise, organic noise, sound effects, address the sync problem in a video file, and edit the audio in a video without any extensive training or expertise.

• It has a user-friendly interface which makes things simple even for amateurs.
• It supports all common video and audio formats, including WMV, MOV, FLV, MTS, MP4, etc.
• You can move audio, replace it or add new audio to the video without worrying about general loss, which is loss of quality.
• You can export the edited video with the new or edited audio to various devices, including the cloud and social media sites.
• Compatible with Windows (including Windows 8) & Mac OS X (10.6 and above).

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 How to change audio in video with Windows Movie Maker

Part 1: How to replace audio in video with Filmora

The first method, let us explore how you can replace audio in video with Wondershare Filmora.

To begin with, get a free trial copy of Wondershare Filmora .

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1. Import file

Open the application and click ‘ Import once you have downloaded and installed Wondershare Filmora. Please search for the relevant video you wish to edit and load it from the hard disk or the specific folder. You can select multiple videos using ‘ctrl’ and clicking on the chosen files.

Step 2. Drag and drop to the video Timeline

The videos selected will be displayed as thumbnails. Choose a video, hit and click without releasing the click and drag the chosen video to the Video Timeline.

Step 3. Remove the original sound of the video

Right-click on it, and you would see the option of “Audio detach.” Click on it, and the audio file will detach from the video file and get added to Music Timeline.

Press “Delete” on your keyboard, and you will get rid of it. You can save this video without the audio, and you would only have the visuals, unimpaired and unaffected in any way, without the sound.

Step 4. Add a new audio track

You can add a new audio track to the video by choosing royalty sound or music from the Filmora library or importing any audio you like.

Part 2: How to change audio in video with Windows Movie Maker

The second method, Apart from replacing audio by Filmora, you can also make it by Windows Movie Maker. Though it is discontinued to develop a new version, you can still use it in Windows 7. Below are the steps to replace audio in Windows Movie Maker .

Step 1: Import video

First, download and run it. Click Add videos and photos to import video.

Step 2: Turn off the original sound

Click Edit tab > Video volume to turn off the sound by draging the slider to the left.

Step 3: Add audio to video

Click Add music to import the targeted music to Windows Movie Maker. You can select Add music or Add music at the current point.

Step 4: Save project

Click the file icon in the top left corner to save the video. Choose Save movie to export the targeted file.

Wondershare Filmora allows you to replace easily and edit the audio in the video

Unfortunately, no application by default on your desktop or laptop, phone, or tablet would get this done. To replace audio in the video, you would need the help of state of the art software. Fortunately, you have Wondershare Filmora at your disposal.

With Wondershare Filmora, you can replace audio in the video, mute audio, detach the audio, and add audio. You can eliminate background noise, organic noise, sound effects, address the sync problem in a video file, and edit the audio in a video without any extensive training or expertise.

• It has a user-friendly interface which makes things simple even for amateurs.
• It supports all common video and audio formats, including WMV, MOV, FLV, MTS, MP4, etc.
• You can move audio, replace it or add new audio to the video without worrying about general loss, which is loss of quality.
• You can export the edited video with the new or edited audio to various devices, including the cloud and social media sites.
• Compatible with Windows (including Windows 8) & Mac OS X (10.6 and above).

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 How to change audio in video with Windows Movie Maker

Part 1: How to replace audio in video with Filmora

The first method, let us explore how you can replace audio in video with Wondershare Filmora.

To begin with, get a free trial copy of Wondershare Filmora .

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1. Import file

Open the application and click ‘ Import once you have downloaded and installed Wondershare Filmora. Please search for the relevant video you wish to edit and load it from the hard disk or the specific folder. You can select multiple videos using ‘ctrl’ and clicking on the chosen files.

Step 2. Drag and drop to the video Timeline

The videos selected will be displayed as thumbnails. Choose a video, hit and click without releasing the click and drag the chosen video to the Video Timeline.

Step 3. Remove the original sound of the video

Right-click on it, and you would see the option of “Audio detach.” Click on it, and the audio file will detach from the video file and get added to Music Timeline.

Press “Delete” on your keyboard, and you will get rid of it. You can save this video without the audio, and you would only have the visuals, unimpaired and unaffected in any way, without the sound.

Step 4. Add a new audio track

You can add a new audio track to the video by choosing royalty sound or music from the Filmora library or importing any audio you like.

Part 2: How to change audio in video with Windows Movie Maker

The second method, Apart from replacing audio by Filmora, you can also make it by Windows Movie Maker. Though it is discontinued to develop a new version, you can still use it in Windows 7. Below are the steps to replace audio in Windows Movie Maker .

Step 1: Import video

First, download and run it. Click Add videos and photos to import video.

Step 2: Turn off the original sound

Click Edit tab > Video volume to turn off the sound by draging the slider to the left.

Step 3: Add audio to video

Click Add music to import the targeted music to Windows Movie Maker. You can select Add music or Add music at the current point.

Step 4: Save project

Click the file icon in the top left corner to save the video. Choose Save movie to export the targeted file.

Wondershare Filmora allows you to replace easily and edit the audio in the video

Unfortunately, no application by default on your desktop or laptop, phone, or tablet would get this done. To replace audio in the video, you would need the help of state of the art software. Fortunately, you have Wondershare Filmora at your disposal.

With Wondershare Filmora, you can replace audio in the video, mute audio, detach the audio, and add audio. You can eliminate background noise, organic noise, sound effects, address the sync problem in a video file, and edit the audio in a video without any extensive training or expertise.

• It has a user-friendly interface which makes things simple even for amateurs.
• It supports all common video and audio formats, including WMV, MOV, FLV, MTS, MP4, etc.
• You can move audio, replace it or add new audio to the video without worrying about general loss, which is loss of quality.
• You can export the edited video with the new or edited audio to various devices, including the cloud and social media sites.
• Compatible with Windows (including Windows 8) & Mac OS X (10.6 and above).

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Also read: