The Essential Guide to Equalizing Audio Volumes in VLC Media Player

How To Normalize Volume in VLC

How to normalize volume, why should we do it, and what is it after all? – these are the questions when it comes to editing our audio files, as well as the video clips we tend to change the sound of. So, first of all, the volume normalization is pretty much explained as follows: The process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. If it is a little bit difficult to understand, we have to highlight that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

But, why bother at all and why not leave it the way it is? Well, the answer to this is almost the same as on why editing exists in general, right? Things are not perfect! This is the fact that prompts us to make our video clips and audio better, improve it at least on the level which can get us the right amount of viewers and listeners. Everyone have had some pain listening to several podcasts, when the volume was too high or too low, or there were so much background noise that the whole recording was hurting the ears of a person! People will not convert to being loyal subscribers, viewers and listeners if their user experience is not favored. So, it is in our best interest to serve their best interest, with a little bit of editing.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

In the first case, you might have somewhat quite voice recording, and would like to make it better without changing its dynamic range, while making it as loud as possible. And when it comes to matching volumes, it is logical that you need to manipulate your editing this way in case you have a group of audio files, each or some of them are at different volumes, so, understandably, if not necessarily, you would like to make them come closer to the same volume.

So, until we give you the step-by step guide on how to normalize your volume in VLC player, we also need to inform you about audio normalization types. Here, generally, we come across three of them: a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. Last but not least, RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

Using any of this, making it better to listen to your voice, without people being annoyed and their ears becoming exhausting with what you have to offer, you will be making it enjoyable for them and easy to come back to your content, as they will not be obliged to change the volume on their own audio players. Instead, their experience with you will be calm and effortless, which you are aiming to achieve.

So, not, what about VLC? – this is a very popular media player, favorite for a lot of people all around the world, so you should already be quite familiar with what it is, at least by having streamed videos and movies there. Speaking more of what it represents, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and additionally, the program can stream from popular websites such as Disney+, Hulu, Netflix, and so on.

As if it was not enough, you can do simple video and audio editing in VLC Media Player, which a lot of people are unaware of! For example, you can easily trim and cut videos. So, as it happens, we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. Sooo… How to do that? Because, actually, it is so simple that you might be surprised you didn’t know about this earlier. To learn how to normalize volume in VLC, follow this simple guideline:

First, of course, as every time working with any software, you need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, you will need to check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, you can Save.

This is not something perfect, because it’s so simple to do and actually what it does is just help adjust the general volume, so it leaves the specifics alone.

But, it might be the case that you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC. So, you can do more with the Audio Effects menu there. And the steps are as follows:

First, on your VLC player, find Tools and then, in the menu, go to Preferences. The window will open, and there you need to select All in Show settings – actually it is a little bit hard to find because this is in the bottom left corner of the window. From there, you will need to navigate to Audio, and then, a little below, click on Filters and highlight it. The checkbox next to the Dynamic range compressor will probably be unchecked – so, check in it.

Next, see where Compressor is in the left panel? Select it. And now, you are free to make the changes to the levels as you see fit.

Here, if you are a little bit overwhelmed with the wide range of options to work on, you can just concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Don’t underestimate Attack time and release time, either. They graduate the changes to ramp them up at first, then down again, rather than initiating them immediately. So, if you set them to your liking as well, this will ensure that you have a more fluid transition in and out of the scene and there are less sudden, sometimes scary volume changes.

Therefore, you are now equipped with the most information you will need to normalize volume in VLC Player – so free to give it a go, play around with the different settings and carry out the best result imaginable for you!

How to normalize audio in Wondershare Filmora?

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor , but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

Free Download For macOS 10.14 or later

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Comprehensive Roadmap to Superior Music Video Creation

In this modern age of the internet, you can find many social media and messaging apps. These apps are great for being in touch with your friends, meeting new people, and becoming a content creator. For example, while you can share videos of others, you can also create videos of your own for sharing online. But to make a video of pictures with music, you will need a music video generator.

Part 1 Music Video Editor Software for PC

Those who have a computer will be glad to know that adding music to a video should be fairly easy. Not only are most modern PCs quite powerful for such basic video editing tasks, but you can also find a wide range of video editor software for PC out there.

Fortunately, you can still find a few powerful video editors for PCs that are entirely free to use. One such great option is Filmora which is considered one of the best free-to-use video editors. Despite being free to use, it offers almost all the functions and features of most other paid video editors. It comes with advanced video effects, color grading options, keyframing support, green screen support, motion tracking options, a sound design panel, and much more.

As a result, you can also use it for basic tasks like adding music to video files without any issues as shown in these steps:

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More about Filmora>

● Start by opening Filmora on your computer and making a new project in it.

● Now, add all of the video files in the timeline that you want to edit for adding music.

● Here, you can find an option to browse, find, and open the music tracks that you want to add to your videos.

● If you do not know how to download music on laptops or desktop PCs, you may not be able to add music using this method.

● Thankfully, you can then go to the Filmora Media Library, where you can find more than 50 music tracks. These music tracks are completely free to use for adding to your videos.

● Once you have selected the right music track using either of these methods, you can find it in the project library.

● You can also double click on the audio track to adjust its volume, pitch, keyframes, and various other settings and options.

● Once done, you can export the video in any format to add music to your videos successfully.

Part 2 Online Video Editor with Music

If you want to learn how to edit music into a video, but you do not have a powerful computer, it can be an issue. This is because most entry-level computers and older computers won’t be able to run a heavy tempo music video with effects that require a powerful computer. Fortunately, you can still edit videos on your computer to add music to them. Thanks to the wide range of online video editors out there, you can do this. As a result, you can make a video with pictures and music online using any web browser.

Since almost everyone wants to edit videos and music in them, you can find all kinds of online video editors. While some are paid, almost all others are entirely free to use. And if you are editing videos online using a web browser, likely, you are not familiar with video editors. As a result, it is also quite important to ensure that any given online video editor is also easy to use. After keeping all of these factors in mind, the Add Audio in Video tool by Online Converter is a great option.

● You have to first open the Add Audio in Video tool in any web browser of your choice.

● After opening this website, click on the Choose File option under the Video section. Then, browse and find the video file that you want to edit for adding music.

● Once the right video file is selected, you need to click on the Choose File option under the Audio File section. Then, like the video file, browse and choose the audio file you want to add to your video.

● Now, change the Options toggle to Replace Audio in Video or as you prefer. You can also change the Volume and Position options as desired.

● Finally, click on the Add button to insert music into your video file. Once the video is edited and music has been added, you can then download it on your computer right away.

Part 3 Free Music Video Editor App

Even though online video editors do not require a powerful computer, you will still need a computer for using them. And since not everyone has a computer, this can be a huge issue for many users. However, if you upload video files on social media websites, you certainly have a smartphone with you. In that case, you will be glad to know that you can even edit videos on your mobile device. This is made possible thanks to the various free music video editor app options.

While there are many video editors for mobile devices, the Mast Music Video Status Maker is a great option for most. It offers a wide range of templates, video effects, music tracks, stickers, color filters, etc. And since it also has an easy-to-use interface, it is one of the best music video animation maker apps for mobile devices. Even though it is quite straightforward to insert video and audio files in this app for combining them, you can go through the following instructions if you are confused:

● Inside the Mast Music Video Status Maker app, you can find the Add button to import all of your video files.

● Once that is done, go to the Music icon tab, where you can find a wide range of popular music tracks.

● If you want, you can also import music files from your smartphone.

● After that, add the music file under your video file and adjust its position.

● At last, save the video on your phone to share it on any social media platform of your choice.

Conclusion

You can find video files on all kinds of online social media platforms. These are great for both entertainment and for learning new things online. Moreover, sharing videos with your friends can also be a great way to connect with them. Although, to ensure that you are sharing high-quality videos, you must use a music adder to video tool. Even a high-quality video won’t look the same without the right music.

02 [Online Video Editor with Music](#Part 2)

03 [Free Music Video Editor App](#Part 3)