“DaVinci Resolve’s Aural Alchemy: Transforming Unprocessed Audio Through Normalization”

How To Normalize Audio In DaVinci Resolve

It happens a lot of times that we are not satisfied with several details our videos and audios contain, and we need to edit them. One of the most common problems we face is that our volumes are not normalized, and we need to take some extra time in order to achieve the best result for our audiences. Even with little or no knowledge about this very specific topic, we need to inform ourselves and find the solutions, make our videos more watch-able and our audios more listen-able, so to say.

There are several ways the audio normalization is achieved. One type is called peak normalization, helping adjust the recording based on the highest signal level present in the recording; the second is loudness normalization, adjusting the recording based on perceived loudness. RMS (Root-Mean-Square) changes the value of all the samples, where their average electrical volume overall is a specified level.

Mostly, there are two reasons why we should give audio normalization a try. You need to decide yourself, what is your reason and expected outcome when you use audio normalization. First is when your aim is to get the maximum volume, but the second boils down to matching different volumes with each other.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

More concretely, in general, audio normalization is when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, “the norm” for the project. It means that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

You can have the desired result using different kinds of software. Nowadays, a lot of programs offer you the tool which facilitates this process. So, one of them would be DaVinci Resolve, which we are going to discuss in this article.

What is DaVinci Resolve? The description goes: “DaVinci Resolve is the world’s only solution that combines editing, color correction, visual effects, motion graphics and audio post production all in one software tool!” so, let’s discover what this software can do to help us balance the audio!

So, how to balance your audio in DaVinci Resolve? We are going to discuss everything step by step – how to set your target loudness level, how to monitor the loudness, and how you can use the automation feature.

Well, of course, have the program installed and opened. Then, add your video with the audio you want to edit or the audio separately, if that’s what you are aiming to do.

The first step you need to make is to set your target loudness level – for this, find the little settings button on the right bottom of the program and click on it. Now, go down to the Fairlight menu and change the Target Loudness Level. If you are doing the audio normalization for the Youtube content, then it is recommended to set it to -14 LUFS.

Next, you are going to head to the Fairlight page and make sure that your meters are open. the loudness meter is on the right top of the layout of the program, and it goes from +9 to -15 LUFS.

Here, zero represents exactly what our target loudness level is, in this case, as you remember, we set it to -14 LUFS. So, ensure that our loudness is as close as zero as possible on the meter, but you can also make it lower, such as -3. Whenever you play, you will be able to see that there are some numbers popping up to the right of the meter.

The first one, you’ll find, is Short – constantly changing, indicating how far above or below the target loudness level you are at a given time. Short Max tells you how far above or below your target loudness level the loudest point of your video is. Range is a measure of your quietest pick to your loudest peak, and the last one is Integrated – it gives you the overall loudness of your video in relation to your target loudness level. Integrated is the number we aim to keep around -3 or 0.

We can use our main slider (next to the sequence on the right) to make our video louder or quieter until we hit that target loudness level.

Also, there is an automation tool that can help you dial in your loudness. In order to access this feature, find a red icon, looking like a wave with kind of a key frames.

Next, open up your Index (on the far top panel, a little bit from the left), and make sure you are in the tracks menu in your editing index.

What you want to do is to make your main track visible on the timeline, so hit on the eyeball next to your main and go to your timeline, where you will expand your main track until you see your Loudness History options.

Here, you will need to check in the box next to Integrated and turn on the Loudness History. This will show the integrated loudness level, adjust your main track’s volume accordingly, so you are below the zero line. And, that’s actually it!

How to normalize audio in Wondershare Filmora X?

Even though doing this with the help of DaVinci Resolve is really helpful, and, let’s say, sophisticated, you might find it a little complicated, in case you were not so familiar with video/audio editing. So, we would like you to have some information about what alternative you can turn to, and in this case, it’s worth bringing up a software - Wondershare Filmora X . With it, you will find that the same task can be carried out wonderfully. It is also a video editor, but it is one of the easiest to use in the word, supported by Mac and Windows. Filmora offers a great, neat, user-friendly interface, and helps you understand the very basics of editing. Actually, it has not been long since Wondershare Filmora X introduced the feature to normalize the audio. So, you might want download the latest version of Filmora X and start following along the steps we are going to provide for you to understand how audio normalization works on Filmora X .

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

After having installed and opened a software, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now, you can see on the graphic that the noises are of different levels from each other. This makes us understand why we need to balance our audio files whenever we are aiming for a good listening experience for our audiences.

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

Now, after clicking on it, you can just wait and the normalization will be completed soon.

When it happens, you will be able to see on the graphics that the volumes are almost on the same level, moreover, listening to it, your ears will “understand” that there is no longer apparent difference between how they sound. So, let’s hope you are happy with the result – in this case, you can save the file you just normalized!

So, in this article, we learned one or two things about normalizing volumes and its types, why and how it is done, and how do it in DaVinci Resolve as well as in Wondershare Filmora X. we hope the guidelines will serve you in the best way and from now on, you will be able to create great sounds!

Free Download For macOS 10.14 or later

After having installed and opened a software, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now, you can see on the graphic that the noises are of different levels from each other. This makes us understand why we need to balance our audio files whenever we are aiming for a good listening experience for our audiences.

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

Now, after clicking on it, you can just wait and the normalization will be completed soon.

When it happens, you will be able to see on the graphics that the volumes are almost on the same level, moreover, listening to it, your ears will “understand” that there is no longer apparent difference between how they sound. So, let’s hope you are happy with the result – in this case, you can save the file you just normalized!

So, in this article, we learned one or two things about normalizing volumes and its types, why and how it is done, and how do it in DaVinci Resolve as well as in Wondershare Filmora X. we hope the guidelines will serve you in the best way and from now on, you will be able to create great sounds!

“Starting with iMovie: Step-by-Step Guide to Incorporating Soundtracks”

Tutorials for Beginners: How to Add Audio to iMovie

Liza Brown

Jan 23, 2024• Proven solutions

iMovie is a video editing software program made by Apple. Capabilities include tools to alter and optimize video color settings, trim and pivot video clips, smooth shaky pictures, add video animations, and change the pace of recordings. you can also edit and enhance a project’s audio by eliminating background noise and increasing the audio levels of quiet segments. Or enjoy your films like never before with iMovie for iOS and macOS. It’s simple to search through your footage and make Hollywood-style trailers and gorgeous 4K-resolution movies.

You may even begin editing on your iPhone or iPad and finish on your Mac. It’s never been easier to implement it in the movies, whether you’re using a Mac or an iOS smartphone. Simply select your clips and then add titles, music, and effects. iMovie even supports 4K video, allowing you to create amazing cinema-quality videos. That’s all there is to it, ladies and gentlemen.

Create professional-looking films using iMovie even if you don’t have a degree in editing. Add images and videos to projects with a single click, cut clips with your finger, create flawless transitions, and fade sounds like a pro. Choose from 13 unique video filters to give a dramatic touch to your movie. Make your film look like it’s from the silent era, a classic western, or a fun comic book. Applying filters to specific segments or your entire video, as well as adjusting the strength, is straightforward on your iPhone or iPad. Slow down action pictures to make them more interesting. Allow viewers to soar across scenes by accelerating them. Alternatively, use picture-in-picture and split-screen techniques to give your school report a broadcast vibe.

In this tutorial, we’ll show you how to add audio to iMovie via different methods. Here we go.

If you want to add audio to video via your android phone , check this out.

Part 1. How to Add Audio to iMovie on iPhone/iPad?

Step #1. In your iMovie project, tap the ADD MEDIA (+ Symbol) button.

Step #2. Then, choose AUDIO.

You will now be given three options. Soundtracks, My Music, and Songs in iCloud. Make your choice.

To listen to a soundtrack, tap it. If a soundtrack is muted, press it to download it first, and then hit it again to preview it.

Step #3. To add a soundtrack to your project, hit the Add Audio icon next to it. iMovie will automatically insert the music at the beginning of the project and adjust it to match the duration of the project.

Adding sound effects

When you add a sound effect, it is linked to the video clip above it in the timeline. When you move the video clip, the sound effect moves with it. This differs from soundtracks, which are separate from the video segments in your production.

Scroll the timeline with your project open until the play head (the white vertical line) appears where you wish to add the sound effect.

To browse the built-in sound effects, press the Add Media button, then Audio, then Sound Effects.

To hear a sound effect, tap it.

Tap the Add Audio button next to the sound effect to add it.

Step #4. Adjust the volume of the clip

After you’ve added sound to your iMovie project, you may change the level of audio clips to achieve the ideal sound mix, or change the level of video clips that have sound. To change the volume of an audio or video clip, select it in the timeline, click the Volume button at the bottom of the window, and then drag the slider to raise or decrease the volume. When you completely reduce the volume of a clip, a Mute symbol displays on the clip in the timeline.

Part 2. How to Add Audio to iMovie on Mac?

iMovie for Mac comes with a library of music and sound clips that you may use in your project. In addition to sound effects such as rain and footsteps, iMovie includes audio clips such as ambiances and jingles.

Step #1. With your project open, go to the top of the browser and select Audio, followed by Sound Effects in the sidebar on the left. To access the Media Browser, you may need to click the Media Browser button.

Step #2. Hover the pointer over a jingle or sound clip in the list to preview it, and then click the play button next to the sound clip. You may also preview a song or sound clip by selecting it, clicking on the waveform at the top of the media browser, and then pressing the Spacebar.

Step #3. Drag jingles or other audio clips to the music well, represented by the musical note icon in the timeline, to create background music for your film. The video clips in the timeline have no effect on the audio in the music well.

Step #4. To add music or sound effects to a video clip, drag it under the video clip until a bar linking the clips appears. When you move the connected video clip, the audio follows.

Part 3. How to Add Audio to iMovie from iTunes?

If you want to add songs such as M4P music and Apple Music from iTunes to iMovie but discover that all of the music is protected, all you need is the Sidify Apple Music Converter. Sidify Apple Music Converter enables you to download music without quality loss. One of Sidify’s distinctive advantages is its ability to remove protection at an extremely quick rate – up to 20 times faster than any other similar program. The software’s user interface is straightforward. The program is simple to use even for inexperienced users. In this section, we’ll teach you how to add M4P music and Apple Music to an iMovie project as background music.

What you’ll need:

• A Mac or Windows computer running macOS or Windows OS
• The most recent version of iTunes
• Sidify Apple Music Converter is available
• Sidify Apple Music Converter can now play Apple Music

Launch Sidify Apple Music Converter, click the + button, and all the tunes you’ve downloaded from Apple Music will appear in the adding music window, as seen below. Select the song to be converted and click OK.

Step 1. Select a file type

A setting window would appear after clicking the setting button or the little gear icon on the upper right of the Sidify interface. You may select an output format such as MP3, M4A, WAV, FLAC, or AIFF, as well as a conversion speed of up to 10X and an output quality of up to 320 Kbps. Furthermore, the output path can be changed if necessary.

Step 2. Begin the conversion

Once all of the files have been added to the queue and all of the settings have been completed, click the Convert button.

Step 3. Find the best-converted music files for iMovie

Now, on your Mac computer, click the Menu button to locate the converted iTunes Music files in the target folder. The music may then be readily added to an iMovie project just like any other standard audio file.

Part 4. How to Add Audio to iMovie from Spotify?

Offline playback is possible with a Spotify Premium membership. You may save songs, playlists, or albums to listen to later. The essential element to remember is that Spotify music, whether online or offline, can only be accessed through the Spotify application. To put it another way, you do not have permission to import Spotify music into other third-party software programs. It comes with iMovie and other video editing software.

Step #1. Import music from Spotify into AudFree. The AudFree Spotify converter must be compatible with the Spotify app. When you run AudFree program from your computer’s desktop, Spotify will immediately load. You may now begin to uncover preferred Spotify tunes to add to iMovie. Import them into AudFree by copying and pasting or dragging and dropping.

Step #2. Set the output format and other preferences for iMovie. MP3, WAV, M4A, and AIFF are all supported by iMovie. You may go to the top menu and select ‘Preferences’ > ‘Convert’. A setting window will appear. You may select one of the iMovie-supported audio formats as the output format in the window. You can also change the output parameters.

Step #3. Spotify tracks may be converted for use in iMovie. To begin the download, click the ‘Convert’ button in the bottom-right corner of the main screen. AudFree program will download Spotify music to target iMovie files at up to 5X quicker speeds. You should disable your antivirus or firewall to make the converting process more stable.

Part 5. The Best Alternative to iMovie on Mac

Although iMovie has the amazing features anyone could wish to work with when crafting an interesting content, it has been seen to be limited in some ways. This is why Wondershare Filmora is the best alternative to iMovie. Filmora allows you to swiftly adjust audio effects and edit sound, ensuring that your demands are met.

Wrap Up

iMovie is an essential video editing tool, and that’s all there is to do when it comes to adding audio to iMovie videos.

iMovie, on the other hand, is limited if you want to test out new capabilities like editing films with amazing effects. This is where Filmora may come in handy in such cases.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Jan 23, 2024• Proven solutions

iMovie is a video editing software program made by Apple. Capabilities include tools to alter and optimize video color settings, trim and pivot video clips, smooth shaky pictures, add video animations, and change the pace of recordings. you can also edit and enhance a project’s audio by eliminating background noise and increasing the audio levels of quiet segments. Or enjoy your films like never before with iMovie for iOS and macOS. It’s simple to search through your footage and make Hollywood-style trailers and gorgeous 4K-resolution movies.

You may even begin editing on your iPhone or iPad and finish on your Mac. It’s never been easier to implement it in the movies, whether you’re using a Mac or an iOS smartphone. Simply select your clips and then add titles, music, and effects. iMovie even supports 4K video, allowing you to create amazing cinema-quality videos. That’s all there is to it, ladies and gentlemen.

Create professional-looking films using iMovie even if you don’t have a degree in editing. Add images and videos to projects with a single click, cut clips with your finger, create flawless transitions, and fade sounds like a pro. Choose from 13 unique video filters to give a dramatic touch to your movie. Make your film look like it’s from the silent era, a classic western, or a fun comic book. Applying filters to specific segments or your entire video, as well as adjusting the strength, is straightforward on your iPhone or iPad. Slow down action pictures to make them more interesting. Allow viewers to soar across scenes by accelerating them. Alternatively, use picture-in-picture and split-screen techniques to give your school report a broadcast vibe.

In this tutorial, we’ll show you how to add audio to iMovie via different methods. Here we go.

If you want to add audio to video via your android phone , check this out.

Part 1. How to Add Audio to iMovie on iPhone/iPad?

Step #1. In your iMovie project, tap the ADD MEDIA (+ Symbol) button.

Step #2. Then, choose AUDIO.

You will now be given three options. Soundtracks, My Music, and Songs in iCloud. Make your choice.

To listen to a soundtrack, tap it. If a soundtrack is muted, press it to download it first, and then hit it again to preview it.

Step #3. To add a soundtrack to your project, hit the Add Audio icon next to it. iMovie will automatically insert the music at the beginning of the project and adjust it to match the duration of the project.

Adding sound effects

When you add a sound effect, it is linked to the video clip above it in the timeline. When you move the video clip, the sound effect moves with it. This differs from soundtracks, which are separate from the video segments in your production.

Scroll the timeline with your project open until the play head (the white vertical line) appears where you wish to add the sound effect.

To browse the built-in sound effects, press the Add Media button, then Audio, then Sound Effects.

To hear a sound effect, tap it.

Tap the Add Audio button next to the sound effect to add it.

Step #4. Adjust the volume of the clip

After you’ve added sound to your iMovie project, you may change the level of audio clips to achieve the ideal sound mix, or change the level of video clips that have sound. To change the volume of an audio or video clip, select it in the timeline, click the Volume button at the bottom of the window, and then drag the slider to raise or decrease the volume. When you completely reduce the volume of a clip, a Mute symbol displays on the clip in the timeline.

Part 2. How to Add Audio to iMovie on Mac?

iMovie for Mac comes with a library of music and sound clips that you may use in your project. In addition to sound effects such as rain and footsteps, iMovie includes audio clips such as ambiances and jingles.

Step #1. With your project open, go to the top of the browser and select Audio, followed by Sound Effects in the sidebar on the left. To access the Media Browser, you may need to click the Media Browser button.

Step #2. Hover the pointer over a jingle or sound clip in the list to preview it, and then click the play button next to the sound clip. You may also preview a song or sound clip by selecting it, clicking on the waveform at the top of the media browser, and then pressing the Spacebar.

Step #3. Drag jingles or other audio clips to the music well, represented by the musical note icon in the timeline, to create background music for your film. The video clips in the timeline have no effect on the audio in the music well.

Step #4. To add music or sound effects to a video clip, drag it under the video clip until a bar linking the clips appears. When you move the connected video clip, the audio follows.

Part 3. How to Add Audio to iMovie from iTunes?

If you want to add songs such as M4P music and Apple Music from iTunes to iMovie but discover that all of the music is protected, all you need is the Sidify Apple Music Converter. Sidify Apple Music Converter enables you to download music without quality loss. One of Sidify’s distinctive advantages is its ability to remove protection at an extremely quick rate – up to 20 times faster than any other similar program. The software’s user interface is straightforward. The program is simple to use even for inexperienced users. In this section, we’ll teach you how to add M4P music and Apple Music to an iMovie project as background music.

What you’ll need:

• A Mac or Windows computer running macOS or Windows OS
• The most recent version of iTunes
• Sidify Apple Music Converter is available
• Sidify Apple Music Converter can now play Apple Music

Launch Sidify Apple Music Converter, click the + button, and all the tunes you’ve downloaded from Apple Music will appear in the adding music window, as seen below. Select the song to be converted and click OK.

Step 1. Select a file type

A setting window would appear after clicking the setting button or the little gear icon on the upper right of the Sidify interface. You may select an output format such as MP3, M4A, WAV, FLAC, or AIFF, as well as a conversion speed of up to 10X and an output quality of up to 320 Kbps. Furthermore, the output path can be changed if necessary.

Step 2. Begin the conversion

Once all of the files have been added to the queue and all of the settings have been completed, click the Convert button.

Step 3. Find the best-converted music files for iMovie

Now, on your Mac computer, click the Menu button to locate the converted iTunes Music files in the target folder. The music may then be readily added to an iMovie project just like any other standard audio file.

Part 4. How to Add Audio to iMovie from Spotify?

Offline playback is possible with a Spotify Premium membership. You may save songs, playlists, or albums to listen to later. The essential element to remember is that Spotify music, whether online or offline, can only be accessed through the Spotify application. To put it another way, you do not have permission to import Spotify music into other third-party software programs. It comes with iMovie and other video editing software.

Step #1. Import music from Spotify into AudFree. The AudFree Spotify converter must be compatible with the Spotify app. When you run AudFree program from your computer’s desktop, Spotify will immediately load. You may now begin to uncover preferred Spotify tunes to add to iMovie. Import them into AudFree by copying and pasting or dragging and dropping.

Step #2. Set the output format and other preferences for iMovie. MP3, WAV, M4A, and AIFF are all supported by iMovie. You may go to the top menu and select ‘Preferences’ > ‘Convert’. A setting window will appear. You may select one of the iMovie-supported audio formats as the output format in the window. You can also change the output parameters.

Step #3. Spotify tracks may be converted for use in iMovie. To begin the download, click the ‘Convert’ button in the bottom-right corner of the main screen. AudFree program will download Spotify music to target iMovie files at up to 5X quicker speeds. You should disable your antivirus or firewall to make the converting process more stable.

Part 5. The Best Alternative to iMovie on Mac

Although iMovie has the amazing features anyone could wish to work with when crafting an interesting content, it has been seen to be limited in some ways. This is why Wondershare Filmora is the best alternative to iMovie. Filmora allows you to swiftly adjust audio effects and edit sound, ensuring that your demands are met.

Wrap Up

iMovie is an essential video editing tool, and that’s all there is to do when it comes to adding audio to iMovie videos.

iMovie, on the other hand, is limited if you want to test out new capabilities like editing films with amazing effects. This is where Filmora may come in handy in such cases.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Jan 23, 2024• Proven solutions

iMovie is a video editing software program made by Apple. Capabilities include tools to alter and optimize video color settings, trim and pivot video clips, smooth shaky pictures, add video animations, and change the pace of recordings. you can also edit and enhance a project’s audio by eliminating background noise and increasing the audio levels of quiet segments. Or enjoy your films like never before with iMovie for iOS and macOS. It’s simple to search through your footage and make Hollywood-style trailers and gorgeous 4K-resolution movies.

You may even begin editing on your iPhone or iPad and finish on your Mac. It’s never been easier to implement it in the movies, whether you’re using a Mac or an iOS smartphone. Simply select your clips and then add titles, music, and effects. iMovie even supports 4K video, allowing you to create amazing cinema-quality videos. That’s all there is to it, ladies and gentlemen.

Create professional-looking films using iMovie even if you don’t have a degree in editing. Add images and videos to projects with a single click, cut clips with your finger, create flawless transitions, and fade sounds like a pro. Choose from 13 unique video filters to give a dramatic touch to your movie. Make your film look like it’s from the silent era, a classic western, or a fun comic book. Applying filters to specific segments or your entire video, as well as adjusting the strength, is straightforward on your iPhone or iPad. Slow down action pictures to make them more interesting. Allow viewers to soar across scenes by accelerating them. Alternatively, use picture-in-picture and split-screen techniques to give your school report a broadcast vibe.

In this tutorial, we’ll show you how to add audio to iMovie via different methods. Here we go.

If you want to add audio to video via your android phone , check this out.

Part 1. How to Add Audio to iMovie on iPhone/iPad?

Step #1. In your iMovie project, tap the ADD MEDIA (+ Symbol) button.

Step #2. Then, choose AUDIO.

You will now be given three options. Soundtracks, My Music, and Songs in iCloud. Make your choice.

To listen to a soundtrack, tap it. If a soundtrack is muted, press it to download it first, and then hit it again to preview it.

Step #3. To add a soundtrack to your project, hit the Add Audio icon next to it. iMovie will automatically insert the music at the beginning of the project and adjust it to match the duration of the project.

Adding sound effects

When you add a sound effect, it is linked to the video clip above it in the timeline. When you move the video clip, the sound effect moves with it. This differs from soundtracks, which are separate from the video segments in your production.

Scroll the timeline with your project open until the play head (the white vertical line) appears where you wish to add the sound effect.

To browse the built-in sound effects, press the Add Media button, then Audio, then Sound Effects.

To hear a sound effect, tap it.

Tap the Add Audio button next to the sound effect to add it.

Step #4. Adjust the volume of the clip

After you’ve added sound to your iMovie project, you may change the level of audio clips to achieve the ideal sound mix, or change the level of video clips that have sound. To change the volume of an audio or video clip, select it in the timeline, click the Volume button at the bottom of the window, and then drag the slider to raise or decrease the volume. When you completely reduce the volume of a clip, a Mute symbol displays on the clip in the timeline.

Part 2. How to Add Audio to iMovie on Mac?

iMovie for Mac comes with a library of music and sound clips that you may use in your project. In addition to sound effects such as rain and footsteps, iMovie includes audio clips such as ambiances and jingles.

Step #1. With your project open, go to the top of the browser and select Audio, followed by Sound Effects in the sidebar on the left. To access the Media Browser, you may need to click the Media Browser button.

Step #2. Hover the pointer over a jingle or sound clip in the list to preview it, and then click the play button next to the sound clip. You may also preview a song or sound clip by selecting it, clicking on the waveform at the top of the media browser, and then pressing the Spacebar.

Step #3. Drag jingles or other audio clips to the music well, represented by the musical note icon in the timeline, to create background music for your film. The video clips in the timeline have no effect on the audio in the music well.

Step #4. To add music or sound effects to a video clip, drag it under the video clip until a bar linking the clips appears. When you move the connected video clip, the audio follows.

Part 3. How to Add Audio to iMovie from iTunes?

If you want to add songs such as M4P music and Apple Music from iTunes to iMovie but discover that all of the music is protected, all you need is the Sidify Apple Music Converter. Sidify Apple Music Converter enables you to download music without quality loss. One of Sidify’s distinctive advantages is its ability to remove protection at an extremely quick rate – up to 20 times faster than any other similar program. The software’s user interface is straightforward. The program is simple to use even for inexperienced users. In this section, we’ll teach you how to add M4P music and Apple Music to an iMovie project as background music.

What you’ll need:

• A Mac or Windows computer running macOS or Windows OS
• The most recent version of iTunes
• Sidify Apple Music Converter is available
• Sidify Apple Music Converter can now play Apple Music

Launch Sidify Apple Music Converter, click the + button, and all the tunes you’ve downloaded from Apple Music will appear in the adding music window, as seen below. Select the song to be converted and click OK.

Step 1. Select a file type

A setting window would appear after clicking the setting button or the little gear icon on the upper right of the Sidify interface. You may select an output format such as MP3, M4A, WAV, FLAC, or AIFF, as well as a conversion speed of up to 10X and an output quality of up to 320 Kbps. Furthermore, the output path can be changed if necessary.

Step 2. Begin the conversion

Once all of the files have been added to the queue and all of the settings have been completed, click the Convert button.

Step 3. Find the best-converted music files for iMovie

Now, on your Mac computer, click the Menu button to locate the converted iTunes Music files in the target folder. The music may then be readily added to an iMovie project just like any other standard audio file.

Part 4. How to Add Audio to iMovie from Spotify?

Offline playback is possible with a Spotify Premium membership. You may save songs, playlists, or albums to listen to later. The essential element to remember is that Spotify music, whether online or offline, can only be accessed through the Spotify application. To put it another way, you do not have permission to import Spotify music into other third-party software programs. It comes with iMovie and other video editing software.

Step #1. Import music from Spotify into AudFree. The AudFree Spotify converter must be compatible with the Spotify app. When you run AudFree program from your computer’s desktop, Spotify will immediately load. You may now begin to uncover preferred Spotify tunes to add to iMovie. Import them into AudFree by copying and pasting or dragging and dropping.

Step #2. Set the output format and other preferences for iMovie. MP3, WAV, M4A, and AIFF are all supported by iMovie. You may go to the top menu and select ‘Preferences’ > ‘Convert’. A setting window will appear. You may select one of the iMovie-supported audio formats as the output format in the window. You can also change the output parameters.

Step #3. Spotify tracks may be converted for use in iMovie. To begin the download, click the ‘Convert’ button in the bottom-right corner of the main screen. AudFree program will download Spotify music to target iMovie files at up to 5X quicker speeds. You should disable your antivirus or firewall to make the converting process more stable.

Part 5. The Best Alternative to iMovie on Mac

Although iMovie has the amazing features anyone could wish to work with when crafting an interesting content, it has been seen to be limited in some ways. This is why Wondershare Filmora is the best alternative to iMovie. Filmora allows you to swiftly adjust audio effects and edit sound, ensuring that your demands are met.

Wrap Up

iMovie is an essential video editing tool, and that’s all there is to do when it comes to adding audio to iMovie videos.

iMovie, on the other hand, is limited if you want to test out new capabilities like editing films with amazing effects. This is where Filmora may come in handy in such cases.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Jan 23, 2024• Proven solutions

iMovie is a video editing software program made by Apple. Capabilities include tools to alter and optimize video color settings, trim and pivot video clips, smooth shaky pictures, add video animations, and change the pace of recordings. you can also edit and enhance a project’s audio by eliminating background noise and increasing the audio levels of quiet segments. Or enjoy your films like never before with iMovie for iOS and macOS. It’s simple to search through your footage and make Hollywood-style trailers and gorgeous 4K-resolution movies.

You may even begin editing on your iPhone or iPad and finish on your Mac. It’s never been easier to implement it in the movies, whether you’re using a Mac or an iOS smartphone. Simply select your clips and then add titles, music, and effects. iMovie even supports 4K video, allowing you to create amazing cinema-quality videos. That’s all there is to it, ladies and gentlemen.

Create professional-looking films using iMovie even if you don’t have a degree in editing. Add images and videos to projects with a single click, cut clips with your finger, create flawless transitions, and fade sounds like a pro. Choose from 13 unique video filters to give a dramatic touch to your movie. Make your film look like it’s from the silent era, a classic western, or a fun comic book. Applying filters to specific segments or your entire video, as well as adjusting the strength, is straightforward on your iPhone or iPad. Slow down action pictures to make them more interesting. Allow viewers to soar across scenes by accelerating them. Alternatively, use picture-in-picture and split-screen techniques to give your school report a broadcast vibe.

In this tutorial, we’ll show you how to add audio to iMovie via different methods. Here we go.

If you want to add audio to video via your android phone , check this out.

Part 1. How to Add Audio to iMovie on iPhone/iPad?

Step #1. In your iMovie project, tap the ADD MEDIA (+ Symbol) button.

Step #2. Then, choose AUDIO.

You will now be given three options. Soundtracks, My Music, and Songs in iCloud. Make your choice.

To listen to a soundtrack, tap it. If a soundtrack is muted, press it to download it first, and then hit it again to preview it.

Step #3. To add a soundtrack to your project, hit the Add Audio icon next to it. iMovie will automatically insert the music at the beginning of the project and adjust it to match the duration of the project.

Adding sound effects

When you add a sound effect, it is linked to the video clip above it in the timeline. When you move the video clip, the sound effect moves with it. This differs from soundtracks, which are separate from the video segments in your production.

Scroll the timeline with your project open until the play head (the white vertical line) appears where you wish to add the sound effect.

To browse the built-in sound effects, press the Add Media button, then Audio, then Sound Effects.

To hear a sound effect, tap it.

Tap the Add Audio button next to the sound effect to add it.

Step #4. Adjust the volume of the clip

After you’ve added sound to your iMovie project, you may change the level of audio clips to achieve the ideal sound mix, or change the level of video clips that have sound. To change the volume of an audio or video clip, select it in the timeline, click the Volume button at the bottom of the window, and then drag the slider to raise or decrease the volume. When you completely reduce the volume of a clip, a Mute symbol displays on the clip in the timeline.

Part 2. How to Add Audio to iMovie on Mac?

iMovie for Mac comes with a library of music and sound clips that you may use in your project. In addition to sound effects such as rain and footsteps, iMovie includes audio clips such as ambiances and jingles.

Step #1. With your project open, go to the top of the browser and select Audio, followed by Sound Effects in the sidebar on the left. To access the Media Browser, you may need to click the Media Browser button.

Step #2. Hover the pointer over a jingle or sound clip in the list to preview it, and then click the play button next to the sound clip. You may also preview a song or sound clip by selecting it, clicking on the waveform at the top of the media browser, and then pressing the Spacebar.

Step #3. Drag jingles or other audio clips to the music well, represented by the musical note icon in the timeline, to create background music for your film. The video clips in the timeline have no effect on the audio in the music well.

Step #4. To add music or sound effects to a video clip, drag it under the video clip until a bar linking the clips appears. When you move the connected video clip, the audio follows.

Part 3. How to Add Audio to iMovie from iTunes?

If you want to add songs such as M4P music and Apple Music from iTunes to iMovie but discover that all of the music is protected, all you need is the Sidify Apple Music Converter. Sidify Apple Music Converter enables you to download music without quality loss. One of Sidify’s distinctive advantages is its ability to remove protection at an extremely quick rate – up to 20 times faster than any other similar program. The software’s user interface is straightforward. The program is simple to use even for inexperienced users. In this section, we’ll teach you how to add M4P music and Apple Music to an iMovie project as background music.

What you’ll need:

• A Mac or Windows computer running macOS or Windows OS
• The most recent version of iTunes
• Sidify Apple Music Converter is available
• Sidify Apple Music Converter can now play Apple Music

Launch Sidify Apple Music Converter, click the + button, and all the tunes you’ve downloaded from Apple Music will appear in the adding music window, as seen below. Select the song to be converted and click OK.

Step 1. Select a file type

A setting window would appear after clicking the setting button or the little gear icon on the upper right of the Sidify interface. You may select an output format such as MP3, M4A, WAV, FLAC, or AIFF, as well as a conversion speed of up to 10X and an output quality of up to 320 Kbps. Furthermore, the output path can be changed if necessary.

Step 2. Begin the conversion

Once all of the files have been added to the queue and all of the settings have been completed, click the Convert button.

Step 3. Find the best-converted music files for iMovie

Now, on your Mac computer, click the Menu button to locate the converted iTunes Music files in the target folder. The music may then be readily added to an iMovie project just like any other standard audio file.

Part 4. How to Add Audio to iMovie from Spotify?

Offline playback is possible with a Spotify Premium membership. You may save songs, playlists, or albums to listen to later. The essential element to remember is that Spotify music, whether online or offline, can only be accessed through the Spotify application. To put it another way, you do not have permission to import Spotify music into other third-party software programs. It comes with iMovie and other video editing software.

Step #1. Import music from Spotify into AudFree. The AudFree Spotify converter must be compatible with the Spotify app. When you run AudFree program from your computer’s desktop, Spotify will immediately load. You may now begin to uncover preferred Spotify tunes to add to iMovie. Import them into AudFree by copying and pasting or dragging and dropping.

Step #2. Set the output format and other preferences for iMovie. MP3, WAV, M4A, and AIFF are all supported by iMovie. You may go to the top menu and select ‘Preferences’ > ‘Convert’. A setting window will appear. You may select one of the iMovie-supported audio formats as the output format in the window. You can also change the output parameters.

Step #3. Spotify tracks may be converted for use in iMovie. To begin the download, click the ‘Convert’ button in the bottom-right corner of the main screen. AudFree program will download Spotify music to target iMovie files at up to 5X quicker speeds. You should disable your antivirus or firewall to make the converting process more stable.

Part 5. The Best Alternative to iMovie on Mac

Although iMovie has the amazing features anyone could wish to work with when crafting an interesting content, it has been seen to be limited in some ways. This is why Wondershare Filmora is the best alternative to iMovie. Filmora allows you to swiftly adjust audio effects and edit sound, ensuring that your demands are met.

Wrap Up

iMovie is an essential video editing tool, and that’s all there is to do when it comes to adding audio to iMovie videos.

iMovie, on the other hand, is limited if you want to test out new capabilities like editing films with amazing effects. This is where Filmora may come in handy in such cases.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

“MP3 Speech-to-Text Conversion Explained: 3 Streamlined Online Approaches (2023 Edition)”

How to Convert MP3 to Text Online [4 Easy Ways]

Shanoon Cox

Mar 27, 2024• Proven solutions

People all over the world use audio and video records. Many people’s lives are made simpler by translating these recordings to text format, which is nothing more than transcription. Let’s start by looking at why people convert mp3 to text.

It is no more difficult to track exact details in an mp3 file collected during a conference, telephone conversation, meeting, or broadcasting. You will have quick access to the files if you use a transcribed text. When you transcribe a recording, you will translate, arrange, and store the data for later reference.

Further, this article will address 4 easy ways that can transcribe mp3 to text, keep reading!

• Method 1: Convert MP3 to Text Online by Media.io
• Method 2: Convert MP3 to Text Online by Veed.io
• Method 3: Convert MP3 to text online by Amberscript
• Method 4: Convert MP3 to text online by Sonix
• Bonus tip: Add text to your video with Wondershare Filmora

---

Method 2: Convert MP3 to Text Online by Veed.io

Would you like to ease your continuous struggle of concentrating on recordings? Well, then convert your MP3 to a text file and transcribe the speech as your way out. A big thanks to VEED! The online auto transcription tool from VEED is quick, accessible, and clear to use. Veed.io is compatible with Video files, WAVs, OGGs, M4As, which you can transcribe to text with a couple of clicks.

Here are three simple steps to converting an MP3 to text using the handy online mp3 to text converter Veed.io.

Step 1: Launch Veed.io

Start by launching the online converter Veed.io on your browser.

Step 2: Upload your MP3 file

To get started, click on Upload a file to import your MP3 file from your device to the online converter or simply drag and drop the file. You can also choose from the other upload options available such as Dropbox, YouTube link, or record.

Step 3: Convert to text

From the edit menu on the left, go to Subtitles, tap on the Auto Transcribe option, pick your language, and hit Start. You can also choose to add manual subtitles or upload a subtitle file.

Step 4: Download the transcribed file

Once your file is transcribed to text, hit Export and select your required preset from the Preset dropdown. Finally, tap on Export video to save the file to your device.

What are the benefits of using this mp3 to text converter?

At the touch of a button, you can convert audio to text.

• Fast

You can transcribe your audio in a couple of seconds with VEED, avoiding your hours of endless writing.

• Simple

You can change every line and word to ensure that the transcription is just everything you want.

• Adaptable

This audio transcription platform is used to make clear transcripts, descriptions, or individual transcript files.

---

Method 3: Convert MP3 to text online by Amberscript

Ambertrasncipt is an excellent mp3 to text converter with speech recognition technology. The software allows you to transcribe audio to text automatically in just a few steps. Here’s a quick tutorial on how you can transcribe mp3 to text using Amberscript.

Step 1: Upload a file

Open Amberscript on your browser to get started. Next, click on Choose File to upload your audio file or drag and drop the file on the main interface.

Step 2: Transcribe mp3 to text

For automatic transcription, select Transcription and further choose Automatic under the select service menu. You can also choose to add manual subtitles. Finally, hit Order to start the transcription process.

Step 3: Transfer

After the transcription process is completed, preview and save your transcript. To save the file to your device, hit Export and choose from the available export options such as Text, Subtitles, or audio.

What are the benefits of using this mp3 to text converter?

• Simple

Find essential sections of your text quickly by searching through them.

• SEO-friendly

Use your text to boost your content’s search engine ranking.

• Edit

You can’t change what was said once the audio has been captured. That isn’t a problem with text analysis.

To conduct qualitative research, you’ll need a transcript.

• Research

To conduct qualitative research, you’ll need a transcript.

• Translate

With text, translating your document becomes much more straightforward.

• Quickly

Text is much faster and simpler to operate.

---

Method 4: Convert MP3 to text online by Sonix

With Sonix you can transcribe, edit, highlight, timestamp, and even translate your transcript in 3 to 4 minutes. Just follow these simple steps and you can convert mp3 to text easily.

Step 1: Sign up for free

First, launch the online tool and sign up for a free account on Sonix or sign in if you have an existing account.

Step 2: Upload your audio file

Drag and drop your MP3 Audio File file (*.MP3) from your PC or import from Google Drive, Dropbox, or YouTube.

Step 3: Convert mp3 to text

Now, select your desired language from the Language dropdown and tap on Transcribe to start the transcription.

Step 4: Edit the transcript

After the transcription process is completed, use the Sonix AudioText Editor to polish your transcript. Simply type in your browser to correct any words.

Step 5: Export

Once all the edits are made, select Export. To save a text version of your MP3 file, choose ‘Text file (.txt)’ from the options list and hit Download.

---

Bonus tip: Add text to your video with Wondershare Filmora

Adding text to your video is the perfect way to connect with your audience on another level. Whether you want to add an exciting intro, ending credits, or captions to tell your story, Wondershare Filmora lets you do just anything. Filmora is a handy and professional video editor that comes loaded with creative editing tools. It offers a variety of text templates with fancy fonts and stunning transitions you can choose from.

What’s more? Using Filmora is very easy, thanks to its intuitive interface. To inspire you, here is a quick guide on how you can add fancy texts to enhance your video.

Step 1: Import a video to the Filmora timeline

Open the Wondershare Filmora tool and hit New Project. On the main screen, open the Import dropdown and select Import media files to import your video. Now drag the video onto the timeline to start editing.

Step 2: Choose a text template

On the Edit menu at the top, go to Titles. From the available presets, you can choose from the cover opener, ending credits, subtitles and lower thirds. Double click a template to preview it, and select the one you like. Then drag the selected template to the timeline.

Step 3: Edit your text

To edit your custom text, double-click the Text thumbnail on the timeline. Now on the text editor panel, customize your font, color, alignment, and size of your text. Or you can choose a built in text style from the text style library. Further, go to the Animation tab, to add special animations to your text.

Now you can either click ok to save the edits or choose the Advanced option to enter the advanced editing panel. Here you can customize the text with elements, shapes, text boxes, and shadows. You can also adjust the duration of your text as you like.

Step 4: Export your video with titles

Once all the edits are completed, tap the Export button on the top right corner. Then give your video a name, select where you want to save it, choose a resolution, and again hit Export.

CONCLUSION

Converting audio to text is not anymore a menial task and does not require human transcribers sitting all day long to listen to audio files. The automatic online transcription apps and platforms allow anyone to convert mp3 to text extremely fast and efficiently. You can transcribe any audio file just like a native speaker with 99 percent accuracy without knowing much about the process.

This strategy can benefit students, professionals, and others who want to consume information but find it hard to concentrate or remember things.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

People all over the world use audio and video records. Many people’s lives are made simpler by translating these recordings to text format, which is nothing more than transcription. Let’s start by looking at why people convert mp3 to text.

It is no more difficult to track exact details in an mp3 file collected during a conference, telephone conversation, meeting, or broadcasting. You will have quick access to the files if you use a transcribed text. When you transcribe a recording, you will translate, arrange, and store the data for later reference.

Further, this article will address 4 easy ways that can transcribe mp3 to text, keep reading!

• Method 1: Convert MP3 to Text Online by Media.io
• Method 2: Convert MP3 to Text Online by Veed.io
• Method 3: Convert MP3 to text online by Amberscript
• Method 4: Convert MP3 to text online by Sonix
• Bonus tip: Add text to your video with Wondershare Filmora

---

Method 2: Convert MP3 to Text Online by Veed.io

Would you like to ease your continuous struggle of concentrating on recordings? Well, then convert your MP3 to a text file and transcribe the speech as your way out. A big thanks to VEED! The online auto transcription tool from VEED is quick, accessible, and clear to use. Veed.io is compatible with Video files, WAVs, OGGs, M4As, which you can transcribe to text with a couple of clicks.

Here are three simple steps to converting an MP3 to text using the handy online mp3 to text converter Veed.io.

Step 1: Launch Veed.io

Start by launching the online converter Veed.io on your browser.

Step 2: Upload your MP3 file

To get started, click on Upload a file to import your MP3 file from your device to the online converter or simply drag and drop the file. You can also choose from the other upload options available such as Dropbox, YouTube link, or record.

Step 3: Convert to text

From the edit menu on the left, go to Subtitles, tap on the Auto Transcribe option, pick your language, and hit Start. You can also choose to add manual subtitles or upload a subtitle file.

Step 4: Download the transcribed file

Once your file is transcribed to text, hit Export and select your required preset from the Preset dropdown. Finally, tap on Export video to save the file to your device.

What are the benefits of using this mp3 to text converter?

At the touch of a button, you can convert audio to text.

• Fast

You can transcribe your audio in a couple of seconds with VEED, avoiding your hours of endless writing.

• Simple

You can change every line and word to ensure that the transcription is just everything you want.

• Adaptable

This audio transcription platform is used to make clear transcripts, descriptions, or individual transcript files.

---

Method 3: Convert MP3 to text online by Amberscript

Ambertrasncipt is an excellent mp3 to text converter with speech recognition technology. The software allows you to transcribe audio to text automatically in just a few steps. Here’s a quick tutorial on how you can transcribe mp3 to text using Amberscript.

Step 1: Upload a file

Open Amberscript on your browser to get started. Next, click on Choose File to upload your audio file or drag and drop the file on the main interface.

Step 2: Transcribe mp3 to text

For automatic transcription, select Transcription and further choose Automatic under the select service menu. You can also choose to add manual subtitles. Finally, hit Order to start the transcription process.

Step 3: Transfer

After the transcription process is completed, preview and save your transcript. To save the file to your device, hit Export and choose from the available export options such as Text, Subtitles, or audio.

What are the benefits of using this mp3 to text converter?

• Simple

Find essential sections of your text quickly by searching through them.

• SEO-friendly

Use your text to boost your content’s search engine ranking.

• Edit

You can’t change what was said once the audio has been captured. That isn’t a problem with text analysis.

To conduct qualitative research, you’ll need a transcript.

• Research

To conduct qualitative research, you’ll need a transcript.

• Translate

With text, translating your document becomes much more straightforward.

• Quickly

Text is much faster and simpler to operate.

---

Method 4: Convert MP3 to text online by Sonix

With Sonix you can transcribe, edit, highlight, timestamp, and even translate your transcript in 3 to 4 minutes. Just follow these simple steps and you can convert mp3 to text easily.

Step 1: Sign up for free

First, launch the online tool and sign up for a free account on Sonix or sign in if you have an existing account.

Step 2: Upload your audio file

Drag and drop your MP3 Audio File file (*.MP3) from your PC or import from Google Drive, Dropbox, or YouTube.

Step 3: Convert mp3 to text

Now, select your desired language from the Language dropdown and tap on Transcribe to start the transcription.

Step 4: Edit the transcript

After the transcription process is completed, use the Sonix AudioText Editor to polish your transcript. Simply type in your browser to correct any words.

Step 5: Export

Once all the edits are made, select Export. To save a text version of your MP3 file, choose ‘Text file (.txt)’ from the options list and hit Download.

---

Bonus tip: Add text to your video with Wondershare Filmora

Adding text to your video is the perfect way to connect with your audience on another level. Whether you want to add an exciting intro, ending credits, or captions to tell your story, Wondershare Filmora lets you do just anything. Filmora is a handy and professional video editor that comes loaded with creative editing tools. It offers a variety of text templates with fancy fonts and stunning transitions you can choose from.

What’s more? Using Filmora is very easy, thanks to its intuitive interface. To inspire you, here is a quick guide on how you can add fancy texts to enhance your video.

Step 1: Import a video to the Filmora timeline

Open the Wondershare Filmora tool and hit New Project. On the main screen, open the Import dropdown and select Import media files to import your video. Now drag the video onto the timeline to start editing.

Step 2: Choose a text template

On the Edit menu at the top, go to Titles. From the available presets, you can choose from the cover opener, ending credits, subtitles and lower thirds. Double click a template to preview it, and select the one you like. Then drag the selected template to the timeline.

Step 3: Edit your text

To edit your custom text, double-click the Text thumbnail on the timeline. Now on the text editor panel, customize your font, color, alignment, and size of your text. Or you can choose a built in text style from the text style library. Further, go to the Animation tab, to add special animations to your text.

Now you can either click ok to save the edits or choose the Advanced option to enter the advanced editing panel. Here you can customize the text with elements, shapes, text boxes, and shadows. You can also adjust the duration of your text as you like.

Step 4: Export your video with titles

Once all the edits are completed, tap the Export button on the top right corner. Then give your video a name, select where you want to save it, choose a resolution, and again hit Export.

CONCLUSION

Converting audio to text is not anymore a menial task and does not require human transcribers sitting all day long to listen to audio files. The automatic online transcription apps and platforms allow anyone to convert mp3 to text extremely fast and efficiently. You can transcribe any audio file just like a native speaker with 99 percent accuracy without knowing much about the process.

This strategy can benefit students, professionals, and others who want to consume information but find it hard to concentrate or remember things.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

People all over the world use audio and video records. Many people’s lives are made simpler by translating these recordings to text format, which is nothing more than transcription. Let’s start by looking at why people convert mp3 to text.

It is no more difficult to track exact details in an mp3 file collected during a conference, telephone conversation, meeting, or broadcasting. You will have quick access to the files if you use a transcribed text. When you transcribe a recording, you will translate, arrange, and store the data for later reference.

Further, this article will address 4 easy ways that can transcribe mp3 to text, keep reading!

• Method 1: Convert MP3 to Text Online by Media.io
• Method 2: Convert MP3 to Text Online by Veed.io
• Method 3: Convert MP3 to text online by Amberscript
• Method 4: Convert MP3 to text online by Sonix
• Bonus tip: Add text to your video with Wondershare Filmora

---

Method 2: Convert MP3 to Text Online by Veed.io

Would you like to ease your continuous struggle of concentrating on recordings? Well, then convert your MP3 to a text file and transcribe the speech as your way out. A big thanks to VEED! The online auto transcription tool from VEED is quick, accessible, and clear to use. Veed.io is compatible with Video files, WAVs, OGGs, M4As, which you can transcribe to text with a couple of clicks.

Here are three simple steps to converting an MP3 to text using the handy online mp3 to text converter Veed.io.

Step 1: Launch Veed.io

Start by launching the online converter Veed.io on your browser.

Step 2: Upload your MP3 file

To get started, click on Upload a file to import your MP3 file from your device to the online converter or simply drag and drop the file. You can also choose from the other upload options available such as Dropbox, YouTube link, or record.

Step 3: Convert to text

From the edit menu on the left, go to Subtitles, tap on the Auto Transcribe option, pick your language, and hit Start. You can also choose to add manual subtitles or upload a subtitle file.

Step 4: Download the transcribed file

Once your file is transcribed to text, hit Export and select your required preset from the Preset dropdown. Finally, tap on Export video to save the file to your device.

What are the benefits of using this mp3 to text converter?

At the touch of a button, you can convert audio to text.

• Fast

You can transcribe your audio in a couple of seconds with VEED, avoiding your hours of endless writing.

• Simple

You can change every line and word to ensure that the transcription is just everything you want.

• Adaptable

This audio transcription platform is used to make clear transcripts, descriptions, or individual transcript files.

---

Method 3: Convert MP3 to text online by Amberscript

Ambertrasncipt is an excellent mp3 to text converter with speech recognition technology. The software allows you to transcribe audio to text automatically in just a few steps. Here’s a quick tutorial on how you can transcribe mp3 to text using Amberscript.

Step 1: Upload a file

Open Amberscript on your browser to get started. Next, click on Choose File to upload your audio file or drag and drop the file on the main interface.

Step 2: Transcribe mp3 to text

For automatic transcription, select Transcription and further choose Automatic under the select service menu. You can also choose to add manual subtitles. Finally, hit Order to start the transcription process.

Step 3: Transfer

After the transcription process is completed, preview and save your transcript. To save the file to your device, hit Export and choose from the available export options such as Text, Subtitles, or audio.

What are the benefits of using this mp3 to text converter?

• Simple

Find essential sections of your text quickly by searching through them.

• SEO-friendly

Use your text to boost your content’s search engine ranking.

• Edit

You can’t change what was said once the audio has been captured. That isn’t a problem with text analysis.

To conduct qualitative research, you’ll need a transcript.

• Research

To conduct qualitative research, you’ll need a transcript.

• Translate

With text, translating your document becomes much more straightforward.

• Quickly

Text is much faster and simpler to operate.

---

Method 4: Convert MP3 to text online by Sonix

With Sonix you can transcribe, edit, highlight, timestamp, and even translate your transcript in 3 to 4 minutes. Just follow these simple steps and you can convert mp3 to text easily.

Step 1: Sign up for free

First, launch the online tool and sign up for a free account on Sonix or sign in if you have an existing account.

Step 2: Upload your audio file

Drag and drop your MP3 Audio File file (*.MP3) from your PC or import from Google Drive, Dropbox, or YouTube.

Step 3: Convert mp3 to text

Now, select your desired language from the Language dropdown and tap on Transcribe to start the transcription.

Step 4: Edit the transcript

After the transcription process is completed, use the Sonix AudioText Editor to polish your transcript. Simply type in your browser to correct any words.

Step 5: Export

Once all the edits are made, select Export. To save a text version of your MP3 file, choose ‘Text file (.txt)’ from the options list and hit Download.

---

Bonus tip: Add text to your video with Wondershare Filmora

Adding text to your video is the perfect way to connect with your audience on another level. Whether you want to add an exciting intro, ending credits, or captions to tell your story, Wondershare Filmora lets you do just anything. Filmora is a handy and professional video editor that comes loaded with creative editing tools. It offers a variety of text templates with fancy fonts and stunning transitions you can choose from.

What’s more? Using Filmora is very easy, thanks to its intuitive interface. To inspire you, here is a quick guide on how you can add fancy texts to enhance your video.

Step 1: Import a video to the Filmora timeline

Open the Wondershare Filmora tool and hit New Project. On the main screen, open the Import dropdown and select Import media files to import your video. Now drag the video onto the timeline to start editing.

Step 2: Choose a text template

On the Edit menu at the top, go to Titles. From the available presets, you can choose from the cover opener, ending credits, subtitles and lower thirds. Double click a template to preview it, and select the one you like. Then drag the selected template to the timeline.

Step 3: Edit your text

To edit your custom text, double-click the Text thumbnail on the timeline. Now on the text editor panel, customize your font, color, alignment, and size of your text. Or you can choose a built in text style from the text style library. Further, go to the Animation tab, to add special animations to your text.

Now you can either click ok to save the edits or choose the Advanced option to enter the advanced editing panel. Here you can customize the text with elements, shapes, text boxes, and shadows. You can also adjust the duration of your text as you like.

Step 4: Export your video with titles

Once all the edits are completed, tap the Export button on the top right corner. Then give your video a name, select where you want to save it, choose a resolution, and again hit Export.

CONCLUSION

Converting audio to text is not anymore a menial task and does not require human transcribers sitting all day long to listen to audio files. The automatic online transcription apps and platforms allow anyone to convert mp3 to text extremely fast and efficiently. You can transcribe any audio file just like a native speaker with 99 percent accuracy without knowing much about the process.

This strategy can benefit students, professionals, and others who want to consume information but find it hard to concentrate or remember things.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

People all over the world use audio and video records. Many people’s lives are made simpler by translating these recordings to text format, which is nothing more than transcription. Let’s start by looking at why people convert mp3 to text.

It is no more difficult to track exact details in an mp3 file collected during a conference, telephone conversation, meeting, or broadcasting. You will have quick access to the files if you use a transcribed text. When you transcribe a recording, you will translate, arrange, and store the data for later reference.

Further, this article will address 4 easy ways that can transcribe mp3 to text, keep reading!

• Method 1: Convert MP3 to Text Online by Media.io
• Method 2: Convert MP3 to Text Online by Veed.io
• Method 3: Convert MP3 to text online by Amberscript
• Method 4: Convert MP3 to text online by Sonix
• Bonus tip: Add text to your video with Wondershare Filmora

---

Method 2: Convert MP3 to Text Online by Veed.io

Would you like to ease your continuous struggle of concentrating on recordings? Well, then convert your MP3 to a text file and transcribe the speech as your way out. A big thanks to VEED! The online auto transcription tool from VEED is quick, accessible, and clear to use. Veed.io is compatible with Video files, WAVs, OGGs, M4As, which you can transcribe to text with a couple of clicks.

Here are three simple steps to converting an MP3 to text using the handy online mp3 to text converter Veed.io.

Step 1: Launch Veed.io

Start by launching the online converter Veed.io on your browser.

Step 2: Upload your MP3 file

To get started, click on Upload a file to import your MP3 file from your device to the online converter or simply drag and drop the file. You can also choose from the other upload options available such as Dropbox, YouTube link, or record.

Step 3: Convert to text

From the edit menu on the left, go to Subtitles, tap on the Auto Transcribe option, pick your language, and hit Start. You can also choose to add manual subtitles or upload a subtitle file.

Step 4: Download the transcribed file

Once your file is transcribed to text, hit Export and select your required preset from the Preset dropdown. Finally, tap on Export video to save the file to your device.

What are the benefits of using this mp3 to text converter?

At the touch of a button, you can convert audio to text.

• Fast

You can transcribe your audio in a couple of seconds with VEED, avoiding your hours of endless writing.

• Simple

You can change every line and word to ensure that the transcription is just everything you want.

• Adaptable

This audio transcription platform is used to make clear transcripts, descriptions, or individual transcript files.

---

Method 3: Convert MP3 to text online by Amberscript

Ambertrasncipt is an excellent mp3 to text converter with speech recognition technology. The software allows you to transcribe audio to text automatically in just a few steps. Here’s a quick tutorial on how you can transcribe mp3 to text using Amberscript.

Step 1: Upload a file

Open Amberscript on your browser to get started. Next, click on Choose File to upload your audio file or drag and drop the file on the main interface.

Step 2: Transcribe mp3 to text

For automatic transcription, select Transcription and further choose Automatic under the select service menu. You can also choose to add manual subtitles. Finally, hit Order to start the transcription process.

Step 3: Transfer

After the transcription process is completed, preview and save your transcript. To save the file to your device, hit Export and choose from the available export options such as Text, Subtitles, or audio.

What are the benefits of using this mp3 to text converter?

• Simple

Find essential sections of your text quickly by searching through them.

• SEO-friendly

Use your text to boost your content’s search engine ranking.

• Edit

You can’t change what was said once the audio has been captured. That isn’t a problem with text analysis.

To conduct qualitative research, you’ll need a transcript.

• Research

To conduct qualitative research, you’ll need a transcript.

• Translate

With text, translating your document becomes much more straightforward.

• Quickly

Text is much faster and simpler to operate.

---

Method 4: Convert MP3 to text online by Sonix

With Sonix you can transcribe, edit, highlight, timestamp, and even translate your transcript in 3 to 4 minutes. Just follow these simple steps and you can convert mp3 to text easily.

Step 1: Sign up for free

First, launch the online tool and sign up for a free account on Sonix or sign in if you have an existing account.

Step 2: Upload your audio file

Drag and drop your MP3 Audio File file (*.MP3) from your PC or import from Google Drive, Dropbox, or YouTube.

Step 3: Convert mp3 to text

Now, select your desired language from the Language dropdown and tap on Transcribe to start the transcription.

Step 4: Edit the transcript

After the transcription process is completed, use the Sonix AudioText Editor to polish your transcript. Simply type in your browser to correct any words.

Step 5: Export

Once all the edits are made, select Export. To save a text version of your MP3 file, choose ‘Text file (.txt)’ from the options list and hit Download.

---

Bonus tip: Add text to your video with Wondershare Filmora

Adding text to your video is the perfect way to connect with your audience on another level. Whether you want to add an exciting intro, ending credits, or captions to tell your story, Wondershare Filmora lets you do just anything. Filmora is a handy and professional video editor that comes loaded with creative editing tools. It offers a variety of text templates with fancy fonts and stunning transitions you can choose from.

What’s more? Using Filmora is very easy, thanks to its intuitive interface. To inspire you, here is a quick guide on how you can add fancy texts to enhance your video.

Step 1: Import a video to the Filmora timeline

Open the Wondershare Filmora tool and hit New Project. On the main screen, open the Import dropdown and select Import media files to import your video. Now drag the video onto the timeline to start editing.

Step 2: Choose a text template

On the Edit menu at the top, go to Titles. From the available presets, you can choose from the cover opener, ending credits, subtitles and lower thirds. Double click a template to preview it, and select the one you like. Then drag the selected template to the timeline.

Step 3: Edit your text

To edit your custom text, double-click the Text thumbnail on the timeline. Now on the text editor panel, customize your font, color, alignment, and size of your text. Or you can choose a built in text style from the text style library. Further, go to the Animation tab, to add special animations to your text.

Now you can either click ok to save the edits or choose the Advanced option to enter the advanced editing panel. Here you can customize the text with elements, shapes, text boxes, and shadows. You can also adjust the duration of your text as you like.

Step 4: Export your video with titles

Once all the edits are completed, tap the Export button on the top right corner. Then give your video a name, select where you want to save it, choose a resolution, and again hit Export.

CONCLUSION

Converting audio to text is not anymore a menial task and does not require human transcribers sitting all day long to listen to audio files. The automatic online transcription apps and platforms allow anyone to convert mp3 to text extremely fast and efficiently. You can transcribe any audio file just like a native speaker with 99 percent accuracy without knowing much about the process.

This strategy can benefit students, professionals, and others who want to consume information but find it hard to concentrate or remember things.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Also read: