The Complete Guide to Professional Audio Editing with Sony Vegas [2023 Edition]

Sony Vegas Audio Editor: How to Edit Audio in Vegas Pro

Benjamin Arango

Mar 27, 2024• Proven solutions

Being the most commonly used professional video editing tool, Sony (Magix) Vegas Pro provides complete control over audio files inside every project. If you are new to this platform then following details will help you to get complete information about how to edit audio volume, apply unique effects, remove noise and adjust fade in as well as fade out options for projects.

You May Also Like: How to Edit YouTube Audio >>

Sony (Magix) Vegas Audio Editor: How to edit audio in Vegas Pro

This tutorial is divided into 6 different sections that contain complete details about all possible audio track adjustments and customization options.

• Section 1: Edit volume for audio track
• Section 2: Fade in and Fade Out
• Section 3: Speed up or Slow down
• Section 4: Reverse audio clip
• Section 5: Noise Removal
• Section 6: Apply unique Audio Effects

Section 1: Edit volume for audio track

First of all you need to import your desired audio file to timeline of Vegas Pro; it can be done by using drag and drop option directly. On Vegas timeline you will find so many sound adjustment options that appear on audio track header.

• Mute the Audio Track: Press M

• Manage volume control for all events of loaded track: Use Volume Slider switch that is denoted by dB.
• Pan Slider: It is possible to make adjustments for audio pan using a slider named as Center. Users can slide it to left side or right side as per audio project requirements.

Note:

1. Put on your headphone to better verify the output result.

2. To reset the volume, just double click on the options.

Those who want to control volume separately for different portions of audio file can go to Audio Envelop (go Insert > Audio Envelopes)and then make all essential settings as:

Mute: A blue line is visible on timeline at your selected audio event, simply double click over it for addition of a specific point and then right click for mute adjustments. From appeared drop down menu you can select muted or not muted and the adjustments will be effective on right side of event point.

Volume: Check the deep blue line on selected event and then double click over it for addition of a marking point. Drag this point up or down for appropriate volume settings and use right click option for additional adjustments.

Pan: Pan Adjustments can be done using red lien control over event. Double click over it and move the point up or down to set pan at specific range. Use right click button for advanced options.

Section 2: Fade in and Fade Out

Some professional settings to audio project can be made using fade in/out options. Users can pull the fade adjust curser to any direction for easy customization.

Hover your cursor on the audio event in timeline, you will find the fade in/out offset handle at the up side corner of the audio event. Pull the Fade in/out offset handle as long as you want:

Section 3: Speed up or Slow down

If you want to change the speed of specific portions of your audio project then hold CTRL button and then start moving your curser over Trim Event handle. If you drag it to right side then it will directly speed up your audio clip and dragging to left side will automatically reduce speed.

Section 4: Reverse audio clip

One can easily reverse his selected audio clip; simply right click over it and then choose Reverse option from drop down menu; it will help to move audio frames in reverse order.

Section 5: Noise Removal

One classic feature of Vegas Pro is its Sound Restoration in Audio FX control. But it does not work as good compared to Audacity. Check this article to see how to remove noise from audio using Sony Vegas Pro & Audacity.

Or check this video tutorial below:

Section 6: Apply unique Audio Effects

If you want to add specific effects to your audio files then use two simple methods on Vegas Pro with its Audio FX tool: One is to add effects on entire video file and second option is to make changes to specific layers of audio project. Use these steps to achieve great results:

To entire audio layer

To an individual portion of the audio layer

Step 1: First of all go to Track Description Box and then press the Track FX icon, an audio track FX will soon appear on your device screen. The three basic controls are always activated, that are Track Compressor, Track EQ and Track Noise Gate.

For additional personalization you need to use plug-in chain button from right corner.

Step 2: Now select any desired effect from list that can make your audio track more impressive and press Add; once applied then hit OK.

Step 3: Make required adjustments with the help of slider or users can also open the drop down box on screen for selection of present templates as per need.

Recommendation

The Vegas Pro is rated as a professional editing software tool due to its advanced user interface, high price range and availability on Mac devices only. If you are searching for some video editing tools that can work on Windows as well as Mac devices then Wondershare Filmora is one of the best options for you all.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Being the most commonly used professional video editing tool, Sony (Magix) Vegas Pro provides complete control over audio files inside every project. If you are new to this platform then following details will help you to get complete information about how to edit audio volume, apply unique effects, remove noise and adjust fade in as well as fade out options for projects.

You May Also Like: How to Edit YouTube Audio >>

Sony (Magix) Vegas Audio Editor: How to edit audio in Vegas Pro

This tutorial is divided into 6 different sections that contain complete details about all possible audio track adjustments and customization options.

• Section 1: Edit volume for audio track
• Section 2: Fade in and Fade Out
• Section 3: Speed up or Slow down
• Section 4: Reverse audio clip
• Section 5: Noise Removal
• Section 6: Apply unique Audio Effects

Section 1: Edit volume for audio track

First of all you need to import your desired audio file to timeline of Vegas Pro; it can be done by using drag and drop option directly. On Vegas timeline you will find so many sound adjustment options that appear on audio track header.

• Mute the Audio Track: Press M

• Manage volume control for all events of loaded track: Use Volume Slider switch that is denoted by dB.
• Pan Slider: It is possible to make adjustments for audio pan using a slider named as Center. Users can slide it to left side or right side as per audio project requirements.

Note:

1. Put on your headphone to better verify the output result.

2. To reset the volume, just double click on the options.

Those who want to control volume separately for different portions of audio file can go to Audio Envelop (go Insert > Audio Envelopes)and then make all essential settings as:

Mute: A blue line is visible on timeline at your selected audio event, simply double click over it for addition of a specific point and then right click for mute adjustments. From appeared drop down menu you can select muted or not muted and the adjustments will be effective on right side of event point.

Volume: Check the deep blue line on selected event and then double click over it for addition of a marking point. Drag this point up or down for appropriate volume settings and use right click option for additional adjustments.

Pan: Pan Adjustments can be done using red lien control over event. Double click over it and move the point up or down to set pan at specific range. Use right click button for advanced options.

Section 2: Fade in and Fade Out

Some professional settings to audio project can be made using fade in/out options. Users can pull the fade adjust curser to any direction for easy customization.

Hover your cursor on the audio event in timeline, you will find the fade in/out offset handle at the up side corner of the audio event. Pull the Fade in/out offset handle as long as you want:

Section 3: Speed up or Slow down

If you want to change the speed of specific portions of your audio project then hold CTRL button and then start moving your curser over Trim Event handle. If you drag it to right side then it will directly speed up your audio clip and dragging to left side will automatically reduce speed.

Section 4: Reverse audio clip

One can easily reverse his selected audio clip; simply right click over it and then choose Reverse option from drop down menu; it will help to move audio frames in reverse order.

Section 5: Noise Removal

One classic feature of Vegas Pro is its Sound Restoration in Audio FX control. But it does not work as good compared to Audacity. Check this article to see how to remove noise from audio using Sony Vegas Pro & Audacity.

Or check this video tutorial below:

Section 6: Apply unique Audio Effects

If you want to add specific effects to your audio files then use two simple methods on Vegas Pro with its Audio FX tool: One is to add effects on entire video file and second option is to make changes to specific layers of audio project. Use these steps to achieve great results:

To entire audio layer

To an individual portion of the audio layer

Step 1: First of all go to Track Description Box and then press the Track FX icon, an audio track FX will soon appear on your device screen. The three basic controls are always activated, that are Track Compressor, Track EQ and Track Noise Gate.

For additional personalization you need to use plug-in chain button from right corner.

Step 2: Now select any desired effect from list that can make your audio track more impressive and press Add; once applied then hit OK.

Step 3: Make required adjustments with the help of slider or users can also open the drop down box on screen for selection of present templates as per need.

Recommendation

The Vegas Pro is rated as a professional editing software tool due to its advanced user interface, high price range and availability on Mac devices only. If you are searching for some video editing tools that can work on Windows as well as Mac devices then Wondershare Filmora is one of the best options for you all.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Being the most commonly used professional video editing tool, Sony (Magix) Vegas Pro provides complete control over audio files inside every project. If you are new to this platform then following details will help you to get complete information about how to edit audio volume, apply unique effects, remove noise and adjust fade in as well as fade out options for projects.

You May Also Like: How to Edit YouTube Audio >>

Sony (Magix) Vegas Audio Editor: How to edit audio in Vegas Pro

This tutorial is divided into 6 different sections that contain complete details about all possible audio track adjustments and customization options.

• Section 1: Edit volume for audio track
• Section 2: Fade in and Fade Out
• Section 3: Speed up or Slow down
• Section 4: Reverse audio clip
• Section 5: Noise Removal
• Section 6: Apply unique Audio Effects

Section 1: Edit volume for audio track

First of all you need to import your desired audio file to timeline of Vegas Pro; it can be done by using drag and drop option directly. On Vegas timeline you will find so many sound adjustment options that appear on audio track header.

• Mute the Audio Track: Press M

• Manage volume control for all events of loaded track: Use Volume Slider switch that is denoted by dB.
• Pan Slider: It is possible to make adjustments for audio pan using a slider named as Center. Users can slide it to left side or right side as per audio project requirements.

Note:

1. Put on your headphone to better verify the output result.

2. To reset the volume, just double click on the options.

Those who want to control volume separately for different portions of audio file can go to Audio Envelop (go Insert > Audio Envelopes)and then make all essential settings as:

Mute: A blue line is visible on timeline at your selected audio event, simply double click over it for addition of a specific point and then right click for mute adjustments. From appeared drop down menu you can select muted or not muted and the adjustments will be effective on right side of event point.

Volume: Check the deep blue line on selected event and then double click over it for addition of a marking point. Drag this point up or down for appropriate volume settings and use right click option for additional adjustments.

Pan: Pan Adjustments can be done using red lien control over event. Double click over it and move the point up or down to set pan at specific range. Use right click button for advanced options.

Section 2: Fade in and Fade Out

Some professional settings to audio project can be made using fade in/out options. Users can pull the fade adjust curser to any direction for easy customization.

Hover your cursor on the audio event in timeline, you will find the fade in/out offset handle at the up side corner of the audio event. Pull the Fade in/out offset handle as long as you want:

Section 3: Speed up or Slow down

If you want to change the speed of specific portions of your audio project then hold CTRL button and then start moving your curser over Trim Event handle. If you drag it to right side then it will directly speed up your audio clip and dragging to left side will automatically reduce speed.

Section 4: Reverse audio clip

One can easily reverse his selected audio clip; simply right click over it and then choose Reverse option from drop down menu; it will help to move audio frames in reverse order.

Section 5: Noise Removal

One classic feature of Vegas Pro is its Sound Restoration in Audio FX control. But it does not work as good compared to Audacity. Check this article to see how to remove noise from audio using Sony Vegas Pro & Audacity.

Or check this video tutorial below:

Section 6: Apply unique Audio Effects

If you want to add specific effects to your audio files then use two simple methods on Vegas Pro with its Audio FX tool: One is to add effects on entire video file and second option is to make changes to specific layers of audio project. Use these steps to achieve great results:

To entire audio layer

To an individual portion of the audio layer

Step 1: First of all go to Track Description Box and then press the Track FX icon, an audio track FX will soon appear on your device screen. The three basic controls are always activated, that are Track Compressor, Track EQ and Track Noise Gate.

For additional personalization you need to use plug-in chain button from right corner.

Step 2: Now select any desired effect from list that can make your audio track more impressive and press Add; once applied then hit OK.

Step 3: Make required adjustments with the help of slider or users can also open the drop down box on screen for selection of present templates as per need.

Recommendation

The Vegas Pro is rated as a professional editing software tool due to its advanced user interface, high price range and availability on Mac devices only. If you are searching for some video editing tools that can work on Windows as well as Mac devices then Wondershare Filmora is one of the best options for you all.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Being the most commonly used professional video editing tool, Sony (Magix) Vegas Pro provides complete control over audio files inside every project. If you are new to this platform then following details will help you to get complete information about how to edit audio volume, apply unique effects, remove noise and adjust fade in as well as fade out options for projects.

You May Also Like: How to Edit YouTube Audio >>

Sony (Magix) Vegas Audio Editor: How to edit audio in Vegas Pro

This tutorial is divided into 6 different sections that contain complete details about all possible audio track adjustments and customization options.

• Section 1: Edit volume for audio track
• Section 2: Fade in and Fade Out
• Section 3: Speed up or Slow down
• Section 4: Reverse audio clip
• Section 5: Noise Removal
• Section 6: Apply unique Audio Effects

Section 1: Edit volume for audio track

First of all you need to import your desired audio file to timeline of Vegas Pro; it can be done by using drag and drop option directly. On Vegas timeline you will find so many sound adjustment options that appear on audio track header.

• Mute the Audio Track: Press M

• Manage volume control for all events of loaded track: Use Volume Slider switch that is denoted by dB.
• Pan Slider: It is possible to make adjustments for audio pan using a slider named as Center. Users can slide it to left side or right side as per audio project requirements.

Note:

1. Put on your headphone to better verify the output result.

2. To reset the volume, just double click on the options.

Those who want to control volume separately for different portions of audio file can go to Audio Envelop (go Insert > Audio Envelopes)and then make all essential settings as:

Mute: A blue line is visible on timeline at your selected audio event, simply double click over it for addition of a specific point and then right click for mute adjustments. From appeared drop down menu you can select muted or not muted and the adjustments will be effective on right side of event point.

Volume: Check the deep blue line on selected event and then double click over it for addition of a marking point. Drag this point up or down for appropriate volume settings and use right click option for additional adjustments.

Pan: Pan Adjustments can be done using red lien control over event. Double click over it and move the point up or down to set pan at specific range. Use right click button for advanced options.

Section 2: Fade in and Fade Out

Some professional settings to audio project can be made using fade in/out options. Users can pull the fade adjust curser to any direction for easy customization.

Hover your cursor on the audio event in timeline, you will find the fade in/out offset handle at the up side corner of the audio event. Pull the Fade in/out offset handle as long as you want:

Section 3: Speed up or Slow down

If you want to change the speed of specific portions of your audio project then hold CTRL button and then start moving your curser over Trim Event handle. If you drag it to right side then it will directly speed up your audio clip and dragging to left side will automatically reduce speed.

Section 4: Reverse audio clip

One can easily reverse his selected audio clip; simply right click over it and then choose Reverse option from drop down menu; it will help to move audio frames in reverse order.

Section 5: Noise Removal

One classic feature of Vegas Pro is its Sound Restoration in Audio FX control. But it does not work as good compared to Audacity. Check this article to see how to remove noise from audio using Sony Vegas Pro & Audacity.

Or check this video tutorial below:

Section 6: Apply unique Audio Effects

If you want to add specific effects to your audio files then use two simple methods on Vegas Pro with its Audio FX tool: One is to add effects on entire video file and second option is to make changes to specific layers of audio project. Use these steps to achieve great results:

To entire audio layer

To an individual portion of the audio layer

Step 1: First of all go to Track Description Box and then press the Track FX icon, an audio track FX will soon appear on your device screen. The three basic controls are always activated, that are Track Compressor, Track EQ and Track Noise Gate.

For additional personalization you need to use plug-in chain button from right corner.

Step 2: Now select any desired effect from list that can make your audio track more impressive and press Add; once applied then hit OK.

Step 3: Make required adjustments with the help of slider or users can also open the drop down box on screen for selection of present templates as per need.

Recommendation

The Vegas Pro is rated as a professional editing software tool due to its advanced user interface, high price range and availability on Mac devices only. If you are searching for some video editing tools that can work on Windows as well as Mac devices then Wondershare Filmora is one of the best options for you all.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

---

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Perfecting the Journey: A Guide to Integrating Visual Sequences

How to Add Video and Audio Transition Between Scenes/Clips

Liza Brown

Mar 27, 2024• Proven solutions

Transition effects appear when one slide/clip replaces another one. It helps make the presentation, slideshow or movie good looking and impressive. Transition effects are widely used in and video editing software, such as Windows Movie Maker, iMovie, DVD Slideshow Builder, etc. You can also use transition sound effects to make amazing videos.

This article will show you how to add transitions (including video and audio transitions) between scenes and clips in Wondershare Filmora . Tips and tricks for transitions are also included.

How to Add Transitions Between clips

• Part 1: Add video transitions between clips
• Part 2: Add audio transitions between clips

Part 1: Add video transitions

1. Download Wondershare Filmora

Wondershare Filmora is an easy-to-use while powerful video editing tool that is available both on Windows and Mac. Download it from the button below to get started.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

2. Import video/photos to the project

Before adding video/photo files to the Timeline, you need to import them first into the project. There are mainly 2 ways to import video/photo files: “Import” button on primary windows, or dragging and dropping files from Windows File Explorer to the User’s Album. Wondershare Filmora supports all popular video/audio/photo formats, including but not limited to AVI, MP4, MOV, MPEG, MPG, FLV, M4V, WMV, TS, MOD, TOD, VOB, MP3, WMA, M4A, JPG, PNG, BMP, and GIF. Then drag and drop the media files from the Media album to the video track on timline for editing

3. Add transitions between video and photo files

All clips will be played one by one without a gap. But no transition effects will be applied by default. To add transitions, switch to Transition tab and drag any transition to the joint of two clips from almost 200 transitions (when the white box appears, release your mouse). Now, you could also add transition at the end or start of a clip.

You can also change the transition mode among Overlap, Prefix, and Postfix by double-clicking on the transition on timeline

Tips and Tricks for Transition Effects

1. If you want to set the transition duration, it’s better to enlarge the Timeline view through the Zoom in tool or slider above the Timeline. Next, double click the transition thumbnail to open the setting panel and input the time. Click “Apply to All” if you want all transition effects to have the same duration.

2. To delete a transition, highlight it and click the Delete button in the toolbar above Timeline, or press Delete key on the keyboard.

3. If you especially love a transition, you can add it to Favorite by right clicking transition in the list and selecting “Add to Favorites” from the menu.

4Export video with transitions

When you are happy with your video and transition effects, click “Create” to save the video with transitions. You can save video in all popular formats on the computer by clicking “Format” and choosing a format from the list. If you want to play your video on iPod, iPhone, iPad, click “Device” and select a thumbnail of the device. It’s also available to upload your videos to YouTube to share with your friends. To play video on TV, you can burn it to DVD with your DVD burner.

In the end, if you have problems with adding transitions, please click here to get in touch with supporters.

Part 3: Add audio transitions

Filmora also allows you to add transitions between audio files. Using the fade-in and fade-out feature to make your audio process smoontly. With the complete new waveform and audio keyframing. Check this video to see the details about video transition in Filmora.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Transition effects appear when one slide/clip replaces another one. It helps make the presentation, slideshow or movie good looking and impressive. Transition effects are widely used in and video editing software, such as Windows Movie Maker, iMovie, DVD Slideshow Builder, etc. You can also use transition sound effects to make amazing videos.

This article will show you how to add transitions (including video and audio transitions) between scenes and clips in Wondershare Filmora . Tips and tricks for transitions are also included.

How to Add Transitions Between clips

• Part 1: Add video transitions between clips
• Part 2: Add audio transitions between clips

Part 1: Add video transitions

1. Download Wondershare Filmora

Wondershare Filmora is an easy-to-use while powerful video editing tool that is available both on Windows and Mac. Download it from the button below to get started.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

2. Import video/photos to the project

Before adding video/photo files to the Timeline, you need to import them first into the project. There are mainly 2 ways to import video/photo files: “Import” button on primary windows, or dragging and dropping files from Windows File Explorer to the User’s Album. Wondershare Filmora supports all popular video/audio/photo formats, including but not limited to AVI, MP4, MOV, MPEG, MPG, FLV, M4V, WMV, TS, MOD, TOD, VOB, MP3, WMA, M4A, JPG, PNG, BMP, and GIF. Then drag and drop the media files from the Media album to the video track on timline for editing

3. Add transitions between video and photo files

All clips will be played one by one without a gap. But no transition effects will be applied by default. To add transitions, switch to Transition tab and drag any transition to the joint of two clips from almost 200 transitions (when the white box appears, release your mouse). Now, you could also add transition at the end or start of a clip.

You can also change the transition mode among Overlap, Prefix, and Postfix by double-clicking on the transition on timeline

Tips and Tricks for Transition Effects

1. If you want to set the transition duration, it’s better to enlarge the Timeline view through the Zoom in tool or slider above the Timeline. Next, double click the transition thumbnail to open the setting panel and input the time. Click “Apply to All” if you want all transition effects to have the same duration.

2. To delete a transition, highlight it and click the Delete button in the toolbar above Timeline, or press Delete key on the keyboard.

3. If you especially love a transition, you can add it to Favorite by right clicking transition in the list and selecting “Add to Favorites” from the menu.

4Export video with transitions

When you are happy with your video and transition effects, click “Create” to save the video with transitions. You can save video in all popular formats on the computer by clicking “Format” and choosing a format from the list. If you want to play your video on iPod, iPhone, iPad, click “Device” and select a thumbnail of the device. It’s also available to upload your videos to YouTube to share with your friends. To play video on TV, you can burn it to DVD with your DVD burner.

In the end, if you have problems with adding transitions, please click here to get in touch with supporters.

Part 3: Add audio transitions

Filmora also allows you to add transitions between audio files. Using the fade-in and fade-out feature to make your audio process smoontly. With the complete new waveform and audio keyframing. Check this video to see the details about video transition in Filmora.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Transition effects appear when one slide/clip replaces another one. It helps make the presentation, slideshow or movie good looking and impressive. Transition effects are widely used in and video editing software, such as Windows Movie Maker, iMovie, DVD Slideshow Builder, etc. You can also use transition sound effects to make amazing videos.

This article will show you how to add transitions (including video and audio transitions) between scenes and clips in Wondershare Filmora . Tips and tricks for transitions are also included.

How to Add Transitions Between clips

• Part 1: Add video transitions between clips
• Part 2: Add audio transitions between clips

Part 1: Add video transitions

1. Download Wondershare Filmora

Wondershare Filmora is an easy-to-use while powerful video editing tool that is available both on Windows and Mac. Download it from the button below to get started.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

2. Import video/photos to the project

Before adding video/photo files to the Timeline, you need to import them first into the project. There are mainly 2 ways to import video/photo files: “Import” button on primary windows, or dragging and dropping files from Windows File Explorer to the User’s Album. Wondershare Filmora supports all popular video/audio/photo formats, including but not limited to AVI, MP4, MOV, MPEG, MPG, FLV, M4V, WMV, TS, MOD, TOD, VOB, MP3, WMA, M4A, JPG, PNG, BMP, and GIF. Then drag and drop the media files from the Media album to the video track on timline for editing

3. Add transitions between video and photo files

All clips will be played one by one without a gap. But no transition effects will be applied by default. To add transitions, switch to Transition tab and drag any transition to the joint of two clips from almost 200 transitions (when the white box appears, release your mouse). Now, you could also add transition at the end or start of a clip.

You can also change the transition mode among Overlap, Prefix, and Postfix by double-clicking on the transition on timeline

Tips and Tricks for Transition Effects

1. If you want to set the transition duration, it’s better to enlarge the Timeline view through the Zoom in tool or slider above the Timeline. Next, double click the transition thumbnail to open the setting panel and input the time. Click “Apply to All” if you want all transition effects to have the same duration.

2. To delete a transition, highlight it and click the Delete button in the toolbar above Timeline, or press Delete key on the keyboard.

3. If you especially love a transition, you can add it to Favorite by right clicking transition in the list and selecting “Add to Favorites” from the menu.

4Export video with transitions

When you are happy with your video and transition effects, click “Create” to save the video with transitions. You can save video in all popular formats on the computer by clicking “Format” and choosing a format from the list. If you want to play your video on iPod, iPhone, iPad, click “Device” and select a thumbnail of the device. It’s also available to upload your videos to YouTube to share with your friends. To play video on TV, you can burn it to DVD with your DVD burner.

In the end, if you have problems with adding transitions, please click here to get in touch with supporters.

Part 3: Add audio transitions

Filmora also allows you to add transitions between audio files. Using the fade-in and fade-out feature to make your audio process smoontly. With the complete new waveform and audio keyframing. Check this video to see the details about video transition in Filmora.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Transition effects appear when one slide/clip replaces another one. It helps make the presentation, slideshow or movie good looking and impressive. Transition effects are widely used in and video editing software, such as Windows Movie Maker, iMovie, DVD Slideshow Builder, etc. You can also use transition sound effects to make amazing videos.

This article will show you how to add transitions (including video and audio transitions) between scenes and clips in Wondershare Filmora . Tips and tricks for transitions are also included.

How to Add Transitions Between clips

• Part 1: Add video transitions between clips
• Part 2: Add audio transitions between clips

Part 1: Add video transitions

1. Download Wondershare Filmora

Wondershare Filmora is an easy-to-use while powerful video editing tool that is available both on Windows and Mac. Download it from the button below to get started.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

2. Import video/photos to the project

Before adding video/photo files to the Timeline, you need to import them first into the project. There are mainly 2 ways to import video/photo files: “Import” button on primary windows, or dragging and dropping files from Windows File Explorer to the User’s Album. Wondershare Filmora supports all popular video/audio/photo formats, including but not limited to AVI, MP4, MOV, MPEG, MPG, FLV, M4V, WMV, TS, MOD, TOD, VOB, MP3, WMA, M4A, JPG, PNG, BMP, and GIF. Then drag and drop the media files from the Media album to the video track on timline for editing

3. Add transitions between video and photo files

All clips will be played one by one without a gap. But no transition effects will be applied by default. To add transitions, switch to Transition tab and drag any transition to the joint of two clips from almost 200 transitions (when the white box appears, release your mouse). Now, you could also add transition at the end or start of a clip.

You can also change the transition mode among Overlap, Prefix, and Postfix by double-clicking on the transition on timeline

Tips and Tricks for Transition Effects

1. If you want to set the transition duration, it’s better to enlarge the Timeline view through the Zoom in tool or slider above the Timeline. Next, double click the transition thumbnail to open the setting panel and input the time. Click “Apply to All” if you want all transition effects to have the same duration.

2. To delete a transition, highlight it and click the Delete button in the toolbar above Timeline, or press Delete key on the keyboard.

3. If you especially love a transition, you can add it to Favorite by right clicking transition in the list and selecting “Add to Favorites” from the menu.

4Export video with transitions

When you are happy with your video and transition effects, click “Create” to save the video with transitions. You can save video in all popular formats on the computer by clicking “Format” and choosing a format from the list. If you want to play your video on iPod, iPhone, iPad, click “Device” and select a thumbnail of the device. It’s also available to upload your videos to YouTube to share with your friends. To play video on TV, you can burn it to DVD with your DVD burner.

In the end, if you have problems with adding transitions, please click here to get in touch with supporters.

Part 3: Add audio transitions

Filmora also allows you to add transitions between audio files. Using the fade-in and fade-out feature to make your audio process smoontly. With the complete new waveform and audio keyframing. Check this video to see the details about video transition in Filmora.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Audio Enhancement Techniques in After Effects: A Comprehensive 2023 Guide

How to Add Audio in After Effects

Benjamin Arango

Mar 27, 2024• Proven solutions

Working with audio files in Adobe After Effects would be challenging since it is basically a visual effects and motion graphics software, but audio can be added to a video in After Effects by the following method we are going to introduce in this guide.

---

How to Add Audio in After Effects

1. Start the program and open a new project.

2. Import the files in the project panel. Mute the video sound if neccesary

3. Import the audio file to the project file as well (that is required to be added).

4. Make sure to convert the audio file to .mp3 format.

5. Drag and drop the audio onto the composition.

To preview the audio in After Effects, enable the audio in the timeline first and then Press cmd+0 on Mac to preview.

6. Adjust the audio settings. Double click “L” on you keyboard to show the audio waveform.

Check this video tutorial to know the details on adding, adjusting audio in After Effects

5 Best Audio Editing Software to Add Audio to Video

1. WavePad from NCH Software

This is definitely one of the most popular editing tools because of how simple and easy it is to use. It is great for beginners who need professional-level editing tools. It is possible to use any audio format on this software including MP3, WMA, OGG, VOX, GSM, etc.

2. Audacity: Free open source audio editing software

This is free software that works on multiple platforms and supports multi-track editing and even live audio recording. It has a very simple user interface that makes it easy to learn on and get used to while offering professional features and ensuring the best quality.

3. Wondershare Filmora

Users are not restricted to working across After Effects to manage their audios. There are a lot of options available in the market that feature simplicity and efficiency. Wondershare Filmora is a unique example of such a platform that provides users with a simple user interface integrated with advanced features to work on. There are a lot of functions that can be performed across audio that is added across Filmora.

Multiple audio adjustment options are available across Wondershare Filmora. While fading the audio and managing its pitch, users can utilize denoising and ducking tools to make different edits across the audio.

To add audio in Wondershare Filmora, you need to follow the steps as explained below.

Step 1: Start a New Project on Wondershare Filmora

Download and install the official software of Wondershare Filmora on your device. Once installed, you need to launch it and tap on “New Project” to start working on Filmora.

Step 2: Import Audio File

Once a new project starts, tap on ‘File’ followed by “Import Media.” Select the option of “Import Media Files” to proceed to the next screen. Add in the required audio successfully.

Step 3: Drag Audio to Timeline

To perform different edits across the audio, the user needs to drag the audio on the timeline.

Step 4: Export Audio File

Once you are done editing the audio, you can easily save it across your device. For that, tap on “Export” to open a new window. Across the “Local” section, select “MP3” from the list of formats and figuratively set all the other settings before tapping on “Export.”

3. FL Studio 12.1.2

This digital editing workstation is definitely not for beginners. Trained professionals who are familiar with editing software will not have a lot of trouble adjusting to this format. This is a professional tool that offers a convenient platform for editing and mixing.

4. Adobe Audition

Here you will get a mix of simplicity and professionalism. It is easy to get used to but progresses in complexity with time.

5. Wavosaur

Wavosaur is an old tool that doesn’t run on most modern computers and laptops. But it does offer many features and methods of processing for audio clips.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Working with audio files in Adobe After Effects would be challenging since it is basically a visual effects and motion graphics software, but audio can be added to a video in After Effects by the following method we are going to introduce in this guide.

---

How to Add Audio in After Effects

1. Start the program and open a new project.

2. Import the files in the project panel. Mute the video sound if neccesary

3. Import the audio file to the project file as well (that is required to be added).

4. Make sure to convert the audio file to .mp3 format.

5. Drag and drop the audio onto the composition.

To preview the audio in After Effects, enable the audio in the timeline first and then Press cmd+0 on Mac to preview.

6. Adjust the audio settings. Double click “L” on you keyboard to show the audio waveform.

Check this video tutorial to know the details on adding, adjusting audio in After Effects

5 Best Audio Editing Software to Add Audio to Video

1. WavePad from NCH Software

This is definitely one of the most popular editing tools because of how simple and easy it is to use. It is great for beginners who need professional-level editing tools. It is possible to use any audio format on this software including MP3, WMA, OGG, VOX, GSM, etc.

2. Audacity: Free open source audio editing software

This is free software that works on multiple platforms and supports multi-track editing and even live audio recording. It has a very simple user interface that makes it easy to learn on and get used to while offering professional features and ensuring the best quality.

3. Wondershare Filmora

Users are not restricted to working across After Effects to manage their audios. There are a lot of options available in the market that feature simplicity and efficiency. Wondershare Filmora is a unique example of such a platform that provides users with a simple user interface integrated with advanced features to work on. There are a lot of functions that can be performed across audio that is added across Filmora.

Multiple audio adjustment options are available across Wondershare Filmora. While fading the audio and managing its pitch, users can utilize denoising and ducking tools to make different edits across the audio.

To add audio in Wondershare Filmora, you need to follow the steps as explained below.

Step 1: Start a New Project on Wondershare Filmora

Download and install the official software of Wondershare Filmora on your device. Once installed, you need to launch it and tap on “New Project” to start working on Filmora.

Step 2: Import Audio File

Once a new project starts, tap on ‘File’ followed by “Import Media.” Select the option of “Import Media Files” to proceed to the next screen. Add in the required audio successfully.

Step 3: Drag Audio to Timeline

To perform different edits across the audio, the user needs to drag the audio on the timeline.

Step 4: Export Audio File

Once you are done editing the audio, you can easily save it across your device. For that, tap on “Export” to open a new window. Across the “Local” section, select “MP3” from the list of formats and figuratively set all the other settings before tapping on “Export.”

3. FL Studio 12.1.2

This digital editing workstation is definitely not for beginners. Trained professionals who are familiar with editing software will not have a lot of trouble adjusting to this format. This is a professional tool that offers a convenient platform for editing and mixing.

4. Adobe Audition

Here you will get a mix of simplicity and professionalism. It is easy to get used to but progresses in complexity with time.

5. Wavosaur

Wavosaur is an old tool that doesn’t run on most modern computers and laptops. But it does offer many features and methods of processing for audio clips.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Working with audio files in Adobe After Effects would be challenging since it is basically a visual effects and motion graphics software, but audio can be added to a video in After Effects by the following method we are going to introduce in this guide.

---

How to Add Audio in After Effects

1. Start the program and open a new project.

2. Import the files in the project panel. Mute the video sound if neccesary

3. Import the audio file to the project file as well (that is required to be added).

4. Make sure to convert the audio file to .mp3 format.

5. Drag and drop the audio onto the composition.

To preview the audio in After Effects, enable the audio in the timeline first and then Press cmd+0 on Mac to preview.

6. Adjust the audio settings. Double click “L” on you keyboard to show the audio waveform.

Check this video tutorial to know the details on adding, adjusting audio in After Effects

5 Best Audio Editing Software to Add Audio to Video

1. WavePad from NCH Software

This is definitely one of the most popular editing tools because of how simple and easy it is to use. It is great for beginners who need professional-level editing tools. It is possible to use any audio format on this software including MP3, WMA, OGG, VOX, GSM, etc.

2. Audacity: Free open source audio editing software

This is free software that works on multiple platforms and supports multi-track editing and even live audio recording. It has a very simple user interface that makes it easy to learn on and get used to while offering professional features and ensuring the best quality.

3. Wondershare Filmora

Users are not restricted to working across After Effects to manage their audios. There are a lot of options available in the market that feature simplicity and efficiency. Wondershare Filmora is a unique example of such a platform that provides users with a simple user interface integrated with advanced features to work on. There are a lot of functions that can be performed across audio that is added across Filmora.

Multiple audio adjustment options are available across Wondershare Filmora. While fading the audio and managing its pitch, users can utilize denoising and ducking tools to make different edits across the audio.

To add audio in Wondershare Filmora, you need to follow the steps as explained below.

Step 1: Start a New Project on Wondershare Filmora

Download and install the official software of Wondershare Filmora on your device. Once installed, you need to launch it and tap on “New Project” to start working on Filmora.

Step 2: Import Audio File

Once a new project starts, tap on ‘File’ followed by “Import Media.” Select the option of “Import Media Files” to proceed to the next screen. Add in the required audio successfully.

Step 3: Drag Audio to Timeline

To perform different edits across the audio, the user needs to drag the audio on the timeline.

Step 4: Export Audio File

Once you are done editing the audio, you can easily save it across your device. For that, tap on “Export” to open a new window. Across the “Local” section, select “MP3” from the list of formats and figuratively set all the other settings before tapping on “Export.”

3. FL Studio 12.1.2

This digital editing workstation is definitely not for beginners. Trained professionals who are familiar with editing software will not have a lot of trouble adjusting to this format. This is a professional tool that offers a convenient platform for editing and mixing.

4. Adobe Audition

Here you will get a mix of simplicity and professionalism. It is easy to get used to but progresses in complexity with time.

5. Wavosaur

Wavosaur is an old tool that doesn’t run on most modern computers and laptops. But it does offer many features and methods of processing for audio clips.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Working with audio files in Adobe After Effects would be challenging since it is basically a visual effects and motion graphics software, but audio can be added to a video in After Effects by the following method we are going to introduce in this guide.

---

How to Add Audio in After Effects

1. Start the program and open a new project.

2. Import the files in the project panel. Mute the video sound if neccesary

3. Import the audio file to the project file as well (that is required to be added).

4. Make sure to convert the audio file to .mp3 format.

5. Drag and drop the audio onto the composition.

To preview the audio in After Effects, enable the audio in the timeline first and then Press cmd+0 on Mac to preview.

6. Adjust the audio settings. Double click “L” on you keyboard to show the audio waveform.

Check this video tutorial to know the details on adding, adjusting audio in After Effects

5 Best Audio Editing Software to Add Audio to Video

1. WavePad from NCH Software

This is definitely one of the most popular editing tools because of how simple and easy it is to use. It is great for beginners who need professional-level editing tools. It is possible to use any audio format on this software including MP3, WMA, OGG, VOX, GSM, etc.

2. Audacity: Free open source audio editing software

This is free software that works on multiple platforms and supports multi-track editing and even live audio recording. It has a very simple user interface that makes it easy to learn on and get used to while offering professional features and ensuring the best quality.

3. Wondershare Filmora

Users are not restricted to working across After Effects to manage their audios. There are a lot of options available in the market that feature simplicity and efficiency. Wondershare Filmora is a unique example of such a platform that provides users with a simple user interface integrated with advanced features to work on. There are a lot of functions that can be performed across audio that is added across Filmora.

Multiple audio adjustment options are available across Wondershare Filmora. While fading the audio and managing its pitch, users can utilize denoising and ducking tools to make different edits across the audio.

To add audio in Wondershare Filmora, you need to follow the steps as explained below.

Step 1: Start a New Project on Wondershare Filmora

Download and install the official software of Wondershare Filmora on your device. Once installed, you need to launch it and tap on “New Project” to start working on Filmora.

Step 2: Import Audio File

Once a new project starts, tap on ‘File’ followed by “Import Media.” Select the option of “Import Media Files” to proceed to the next screen. Add in the required audio successfully.

Step 3: Drag Audio to Timeline

To perform different edits across the audio, the user needs to drag the audio on the timeline.

Step 4: Export Audio File

Once you are done editing the audio, you can easily save it across your device. For that, tap on “Export” to open a new window. Across the “Local” section, select “MP3” from the list of formats and figuratively set all the other settings before tapping on “Export.”

3. FL Studio 12.1.2

This digital editing workstation is definitely not for beginners. Trained professionals who are familiar with editing software will not have a lot of trouble adjusting to this format. This is a professional tool that offers a convenient platform for editing and mixing.

4. Adobe Audition

Here you will get a mix of simplicity and professionalism. It is easy to get used to but progresses in complexity with time.

5. Wavosaur

Wavosaur is an old tool that doesn’t run on most modern computers and laptops. But it does offer many features and methods of processing for audio clips.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Also read: