![Updated 2024 Approved Normalizing Audio in DaVinci Resolve A Step-by-Step Guide](https://www.lifewire.com/thmb/orCGFYNFlEan1uKR5h12Vm8mASA=/400x300/filters:no_upscale():max_bytes(150000):strip_icc():format(webp)/kids-ipad-580f65635f9b58564cc0fc91-5c5cbb6ac9e77c0001d92aa4.jpg)
Updated 2024 Approved Normalizing Audio in DaVinci Resolve A Step-by-Step Guide
![](/images/site-logo.png)
Normalizing Audio in DaVinci Resolve: A Step-by-Step Guide
How To Normalize Audio In DaVinci Resolve
It happens a lot of times that we are not satisfied with several details our videos and audios contain, and we need to edit them. One of the most common problems we face is that our volumes are not normalized, and we need to take some extra time in order to achieve the best result for our audiences. Even with little or no knowledge about this very specific topic, we need to inform ourselves and find the solutions, make our videos more watch-able and our audios more listen-able, so to say.
There are several ways the audio normalization is achieved. One type is called peak normalization, helping adjust the recording based on the highest signal level present in the recording; the second is loudness normalization, adjusting the recording based on perceived loudness. RMS (Root-Mean-Square) changes the value of all the samples, where their average electrical volume overall is a specified level.
Mostly, there are two reasons why we should give audio normalization a try. You need to decide yourself, what is your reason and expected outcome when you use audio normalization. First is when your aim is to get the maximum volume, but the second boils down to matching different volumes with each other.
When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.
More concretely, in general, audio normalization is when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, “the norm” for the project. It means that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.
You can have the desired result using different kinds of software. Nowadays, a lot of programs offer you the tool which facilitates this process. So, one of them would be DaVinci Resolve, which we are going to discuss in this article.
What is DaVinci Resolve? The description goes: “DaVinci Resolve is the world’s only solution that combines editing, color correction, visual effects, motion graphics and audio post production all in one software tool!” so, let’s discover what this software can do to help us balance the audio!
So, how to balance your audio in DaVinci Resolve? We are going to discuss everything step by step – how to set your target loudness level, how to monitor the loudness, and how you can use the automation feature.
Well, of course, have the program installed and opened. Then, add your video with the audio you want to edit or the audio separately, if that’s what you are aiming to do.
The first step you need to make is to set your target loudness level – for this, find the little settings button on the right bottom of the program and click on it. Now, go down to the Fairlight menu and change the Target Loudness Level. If you are doing the audio normalization for the Youtube content, then it is recommended to set it to -14 LUFS.
Next, you are going to head to the Fairlight page and make sure that your meters are open. the loudness meter is on the right top of the layout of the program, and it goes from +9 to -15 LUFS.
Here, zero represents exactly what our target loudness level is, in this case, as you remember, we set it to -14 LUFS. So, ensure that our loudness is as close as zero as possible on the meter, but you can also make it lower, such as -3. Whenever you play, you will be able to see that there are some numbers popping up to the right of the meter.
The first one, you’ll find, is Short – constantly changing, indicating how far above or below the target loudness level you are at a given time. Short Max tells you how far above or below your target loudness level the loudest point of your video is. Range is a measure of your quietest pick to your loudest peak, and the last one is Integrated – it gives you the overall loudness of your video in relation to your target loudness level. Integrated is the number we aim to keep around -3 or 0.
We can use our main slider (next to the sequence on the right) to make our video louder or quieter until we hit that target loudness level.
Also, there is an automation tool that can help you dial in your loudness. In order to access this feature, find a red icon, looking like a wave with kind of a key frames.
Next, open up your Index (on the far top panel, a little bit from the left), and make sure you are in the tracks menu in your editing index.
What you want to do is to make your main track visible on the timeline, so hit on the eyeball next to your main and go to your timeline, where you will expand your main track until you see your Loudness History options.
Here, you will need to check in the box next to Integrated and turn on the Loudness History. This will show the integrated loudness level, adjust your main track’s volume accordingly, so you are below the zero line. And, that’s actually it!
How to normalize audio in Wondershare Filmora X?
Even though doing this with the help of DaVinci Resolve is really helpful, and, let’s say, sophisticated, you might find it a little complicated, in case you were not so familiar with video/audio editing. So, we would like you to have some information about what alternative you can turn to, and in this case, it’s worth bringing up a software - Wondershare Filmora X . With it, you will find that the same task can be carried out wonderfully. It is also a video editor, but it is one of the easiest to use in the word, supported by Mac and Windows. Filmora offers a great, neat, user-friendly interface, and helps you understand the very basics of editing. Actually, it has not been long since Wondershare Filmora X introduced the feature to normalize the audio. So, you might want download the latest version of Filmora X and start following along the steps we are going to provide for you to understand how audio normalization works on Filmora X .
Free Download For Win 7 or later(64-bit)
Free Download For macOS 10.14 or later
After having installed and opened a software, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.
Now, you can see on the graphic that the noises are of different levels from each other. This makes us understand why we need to balance our audio files whenever we are aiming for a good listening experience for our audiences.
Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.
Now, after clicking on it, you can just wait and the normalization will be completed soon.
When it happens, you will be able to see on the graphics that the volumes are almost on the same level, moreover, listening to it, your ears will “understand” that there is no longer apparent difference between how they sound. So, let’s hope you are happy with the result – in this case, you can save the file you just normalized!
So, in this article, we learned one or two things about normalizing volumes and its types, why and how it is done, and how do it in DaVinci Resolve as well as in Wondershare Filmora X. we hope the guidelines will serve you in the best way and from now on, you will be able to create great sounds!
Free Download For macOS 10.14 or later
After having installed and opened a software, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.
Now, you can see on the graphic that the noises are of different levels from each other. This makes us understand why we need to balance our audio files whenever we are aiming for a good listening experience for our audiences.
Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.
Now, after clicking on it, you can just wait and the normalization will be completed soon.
When it happens, you will be able to see on the graphics that the volumes are almost on the same level, moreover, listening to it, your ears will “understand” that there is no longer apparent difference between how they sound. So, let’s hope you are happy with the result – in this case, you can save the file you just normalized!
So, in this article, we learned one or two things about normalizing volumes and its types, why and how it is done, and how do it in DaVinci Resolve as well as in Wondershare Filmora X. we hope the guidelines will serve you in the best way and from now on, you will be able to create great sounds!
Harmonizing Sound: Innovative Solutions to Tackle Distorted Audio Problems
Create High-Quality Video - Wondershare Filmora
An easy and powerful YouTube video editor
Numerous video and audio effects to choose from
Detailed tutorials are provided by the official channel
So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.
In this article
01 What Causes Distorted Audio?
02 How To Fix Distorted Audio Using Different Methods
What Causes Distorted Audio?
Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.
1. Recording Environment
Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.
When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.
2. Touching the Mic While Recording
If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.
3. Using the Wrong Mic
A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.
Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.
4. Positioning Your Microphones Incorrectly
You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.
5. Faulty Equipment
Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.
How To Fix Distorted Audio Using Different Methods
You can fix distorted audio using various methods. They include:
Method 1: How To Fix Distorted Audio in Audacity
Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.
- Open the audio file by dragging and dropping it into Audacity.
- Select the distorted part and click on the Effect option. Then, select Noise Reduction.
- The Noise Reduction window will open.
- Now, click on Noise Profile, and Audacity will know what to filter out.
- Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
- Hit preview to check the audio, then the Click OK button.
If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.
Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.
- To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”
- Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
- Once you have set the values, hit the Preview button to check the audio. Then, click on OK.
That is how to fix distorted audio using Audacity.
You May Be Interested In
How To Fix Distorted Audio in Garageband
Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:
- Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
- Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
- Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
- Click the Edit tab to activate it, and a list of effects will pop up.
- Select Distortion from the list, and you’ll see a drop-down menu.
- Next, select the None option to remove distortion.
If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.
Method 3: How To Fix Distorted Audio in Windows 10
Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:
- When upgrading your computer from an older version to a new one
- In case your computer gets corrupted with a virus
- If your computer or device doesn’t the right sound drivers
So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.
1. Reinstall drivers
- Right-click the start button and choose device manager.
- Navigate through sound, video, and game controllers.
- Click on the Details tab.
- Select hardware Ids from the drop-down menu.
- Copy and first the first value of drivers in your browser and search the internet.
- Open the official site and download the correct driver。
- Install and restart your PC。
2. Update drivers
- Right-click on the start button.
- Scroll to the sound, video, and game controllers option.
- Right-click on the sound device and select uninstall the device.
- Restart your PC after the uninstall process is finished.
- Open the device manager.
- Select and click on the scan for hardware changes option.
Windows will automatically install a new version of sound drivers
3. Run Windows Audio Troubleshooter
- To use this method, open Start and click the cog-like icon. This will open the Settings app.
- Select Update & security.
- Choose Troubleshoot in the left pane.
- Expand the Playing Audio by clicking it.
- Hit the Run the troubleshooter button, then follow the further instructions.
4. Take Exclusive Control of Your Device Option by Disabling Allow Applications
- Navigate to the notification area and right-click on the sound icon. Open Playback devices.
- Next, right-click on the default Playback Device, then open Properties.
- Choose the Advanced tab option.
- Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.
When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!
For Win 7 or later (64-bit)
For macOS 10.12 or later
Conclusion
● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.
So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.
In this article
01 What Causes Distorted Audio?
02 How To Fix Distorted Audio Using Different Methods
What Causes Distorted Audio?
Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.
1. Recording Environment
Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.
When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.
2. Touching the Mic While Recording
If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.
3. Using the Wrong Mic
A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.
Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.
4. Positioning Your Microphones Incorrectly
You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.
5. Faulty Equipment
Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.
How To Fix Distorted Audio Using Different Methods
You can fix distorted audio using various methods. They include:
Method 1: How To Fix Distorted Audio in Audacity
Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.
- Open the audio file by dragging and dropping it into Audacity.
- Select the distorted part and click on the Effect option. Then, select Noise Reduction.
- The Noise Reduction window will open.
- Now, click on Noise Profile, and Audacity will know what to filter out.
- Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
- Hit preview to check the audio, then the Click OK button.
If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.
Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.
- To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”
- Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
- Once you have set the values, hit the Preview button to check the audio. Then, click on OK.
That is how to fix distorted audio using Audacity.
You May Be Interested In
How To Fix Distorted Audio in Garageband
Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:
- Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
- Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
- Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
- Click the Edit tab to activate it, and a list of effects will pop up.
- Select Distortion from the list, and you’ll see a drop-down menu.
- Next, select the None option to remove distortion.
If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.
Method 3: How To Fix Distorted Audio in Windows 10
Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:
- When upgrading your computer from an older version to a new one
- In case your computer gets corrupted with a virus
- If your computer or device doesn’t the right sound drivers
So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.
1. Reinstall drivers
- Right-click the start button and choose device manager.
- Navigate through sound, video, and game controllers.
- Click on the Details tab.
- Select hardware Ids from the drop-down menu.
- Copy and first the first value of drivers in your browser and search the internet.
- Open the official site and download the correct driver。
- Install and restart your PC。
2. Update drivers
- Right-click on the start button.
- Scroll to the sound, video, and game controllers option.
- Right-click on the sound device and select uninstall the device.
- Restart your PC after the uninstall process is finished.
- Open the device manager.
- Select and click on the scan for hardware changes option.
Windows will automatically install a new version of sound drivers
3. Run Windows Audio Troubleshooter
- To use this method, open Start and click the cog-like icon. This will open the Settings app.
- Select Update & security.
- Choose Troubleshoot in the left pane.
- Expand the Playing Audio by clicking it.
- Hit the Run the troubleshooter button, then follow the further instructions.
4. Take Exclusive Control of Your Device Option by Disabling Allow Applications
- Navigate to the notification area and right-click on the sound icon. Open Playback devices.
- Next, right-click on the default Playback Device, then open Properties.
- Choose the Advanced tab option.
- Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.
When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!
For Win 7 or later (64-bit)
For macOS 10.12 or later
Conclusion
● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.
So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.
In this article
01 What Causes Distorted Audio?
02 How To Fix Distorted Audio Using Different Methods
What Causes Distorted Audio?
Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.
1. Recording Environment
Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.
When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.
2. Touching the Mic While Recording
If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.
3. Using the Wrong Mic
A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.
Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.
4. Positioning Your Microphones Incorrectly
You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.
5. Faulty Equipment
Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.
How To Fix Distorted Audio Using Different Methods
You can fix distorted audio using various methods. They include:
Method 1: How To Fix Distorted Audio in Audacity
Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.
- Open the audio file by dragging and dropping it into Audacity.
- Select the distorted part and click on the Effect option. Then, select Noise Reduction.
- The Noise Reduction window will open.
- Now, click on Noise Profile, and Audacity will know what to filter out.
- Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
- Hit preview to check the audio, then the Click OK button.
If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.
Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.
- To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”
- Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
- Once you have set the values, hit the Preview button to check the audio. Then, click on OK.
That is how to fix distorted audio using Audacity.
You May Be Interested In
How To Fix Distorted Audio in Garageband
Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:
- Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
- Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
- Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
- Click the Edit tab to activate it, and a list of effects will pop up.
- Select Distortion from the list, and you’ll see a drop-down menu.
- Next, select the None option to remove distortion.
If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.
Method 3: How To Fix Distorted Audio in Windows 10
Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:
- When upgrading your computer from an older version to a new one
- In case your computer gets corrupted with a virus
- If your computer or device doesn’t the right sound drivers
So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.
1. Reinstall drivers
- Right-click the start button and choose device manager.
- Navigate through sound, video, and game controllers.
- Click on the Details tab.
- Select hardware Ids from the drop-down menu.
- Copy and first the first value of drivers in your browser and search the internet.
- Open the official site and download the correct driver。
- Install and restart your PC。
2. Update drivers
- Right-click on the start button.
- Scroll to the sound, video, and game controllers option.
- Right-click on the sound device and select uninstall the device.
- Restart your PC after the uninstall process is finished.
- Open the device manager.
- Select and click on the scan for hardware changes option.
Windows will automatically install a new version of sound drivers
3. Run Windows Audio Troubleshooter
- To use this method, open Start and click the cog-like icon. This will open the Settings app.
- Select Update & security.
- Choose Troubleshoot in the left pane.
- Expand the Playing Audio by clicking it.
- Hit the Run the troubleshooter button, then follow the further instructions.
4. Take Exclusive Control of Your Device Option by Disabling Allow Applications
- Navigate to the notification area and right-click on the sound icon. Open Playback devices.
- Next, right-click on the default Playback Device, then open Properties.
- Choose the Advanced tab option.
- Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.
When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!
For Win 7 or later (64-bit)
For macOS 10.12 or later
Conclusion
● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.
So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.
In this article
01 What Causes Distorted Audio?
02 How To Fix Distorted Audio Using Different Methods
What Causes Distorted Audio?
Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.
1. Recording Environment
Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.
When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.
2. Touching the Mic While Recording
If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.
3. Using the Wrong Mic
A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.
Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.
4. Positioning Your Microphones Incorrectly
You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.
5. Faulty Equipment
Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.
How To Fix Distorted Audio Using Different Methods
You can fix distorted audio using various methods. They include:
Method 1: How To Fix Distorted Audio in Audacity
Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.
- Open the audio file by dragging and dropping it into Audacity.
- Select the distorted part and click on the Effect option. Then, select Noise Reduction.
- The Noise Reduction window will open.
- Now, click on Noise Profile, and Audacity will know what to filter out.
- Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
- Hit preview to check the audio, then the Click OK button.
If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.
Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.
- To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”
- Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
- Once you have set the values, hit the Preview button to check the audio. Then, click on OK.
That is how to fix distorted audio using Audacity.
You May Be Interested In
How To Fix Distorted Audio in Garageband
Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:
- Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
- Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
- Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
- Click the Edit tab to activate it, and a list of effects will pop up.
- Select Distortion from the list, and you’ll see a drop-down menu.
- Next, select the None option to remove distortion.
If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.
Method 3: How To Fix Distorted Audio in Windows 10
Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:
- When upgrading your computer from an older version to a new one
- In case your computer gets corrupted with a virus
- If your computer or device doesn’t the right sound drivers
So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.
1. Reinstall drivers
- Right-click the start button and choose device manager.
- Navigate through sound, video, and game controllers.
- Click on the Details tab.
- Select hardware Ids from the drop-down menu.
- Copy and first the first value of drivers in your browser and search the internet.
- Open the official site and download the correct driver。
- Install and restart your PC。
2. Update drivers
- Right-click on the start button.
- Scroll to the sound, video, and game controllers option.
- Right-click on the sound device and select uninstall the device.
- Restart your PC after the uninstall process is finished.
- Open the device manager.
- Select and click on the scan for hardware changes option.
Windows will automatically install a new version of sound drivers
3. Run Windows Audio Troubleshooter
- To use this method, open Start and click the cog-like icon. This will open the Settings app.
- Select Update & security.
- Choose Troubleshoot in the left pane.
- Expand the Playing Audio by clicking it.
- Hit the Run the troubleshooter button, then follow the further instructions.
4. Take Exclusive Control of Your Device Option by Disabling Allow Applications
- Navigate to the notification area and right-click on the sound icon. Open Playback devices.
- Next, right-click on the default Playback Device, then open Properties.
- Choose the Advanced tab option.
- Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.
When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!
For Win 7 or later (64-bit)
For macOS 10.12 or later
Conclusion
● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.
Techniques for Silencing Audio Tracking in Videos
Are you a creative creator? Do you long productivity at the workplace? Or are you either Windows or Mac user?
With the media and creative industry progressing exponentially, advanced features have become necessary. The background music has to be eliminated in multiple instances. It is important to add one’s music, voice, or audio. Most creators prefer visuals instead of audio. Hence, a background music remover is needed.
The article previews a background music remover online, Windows, and Mac. The step-by-step guide to using the apps would also be the crux of the article. So, are you with us? Let us do this together!
In this article
02 How to Remove Background Music on Windows?
03 How to Remove Background Music on Mac?
Part 2: How to Remove Background Music on Windows?
Are you into Windows? Do you find Windows more workable than any other operating system? It is good to know! The section provides an overview of Wondershare Filmora . Wondershare Filmora is a perfect background music remover, and there is no denying the fact.
Wondershare Filmora is known for audio and video editing . It is why removing audio from a video is one of the strongest suits of this software. The “Audio Detach” functionality continues to create real chaos in the world. Besides this, creative professionals can rely on Filmora to customize timeline-track controls, fade audio in and out, and perform audio ducking like a pro.
With that said, Filmora splits and adjusts audio with a simple process. Moving on, Wondershare Filmora has a particular specialty in video editing. There are more than 300 effects that make any regular video extraordinary and magical. The motion graphics and animations bring revolution to the workplace and enhance viewer engagement.
Wondershare Filmora is used in the creative industry for changing backgrounds. The motion tracking feature enables you to keep the subject in the frame. Furthermore, do not hesitate to resize videos, and add watermarks, logos, and whatnot. Isn’t that tempting for you?
There is an extensive set of video formats supported by Filmora. For instance, MP4, FLV, AVI, MOV, VOB, 3GP, 3G2, MPG, MPEG, TS, TRP, TP, F4V, M4V, M2TS, MTS, DAT, WMV, MKV, etc.
For Win 7 or later (64-bit)
For macOS 10.12 or later
If you want to know how to remove background music from a video, continue exploring the section. Let us begin!
Step 1: Opening Filmora
Launch Wondershare Filmora from your Windows operating system. The interface appears in a couple of seconds. Click on “New Project” after selecting the aspect ratio for the video. Now, navigate to the “File” located in the top panel. Select “Import Media” and then “Import Media Files.”
Step 2: Importing Process
Use the system to import the file after it is displayed in the Media Library, drag and drop it to the timeline. Change the resolution or frame rate as you deem necessary. After that, the user is directed to right-click on the media in the timeline. Hit “Audio” from the menu.
Step 3: Detaching Process
Select “Detach Audio” from the “Audio” sub-menu. The audio will be detached and shown on the timeline separately from the primary video. Now, please right-click on the audio to delete it. You can also click on it and press “Delete” from the keyboard.
Step 4: Exporting Process
You can preview the video as well to check if the audio is removed permanently or not. The user can export the video now by clicking on the “Export” button. Select the output format and hit “Export” to save the video without background music on your computer.
Part 3: How to Remove Background Music on Mac?
Allow us to introduce you to another background music remover. iMovie is a free tool that comes pre-built in Mac. It has an extremely interactive interface that makes workability flawless. If you are a beginner, you shouldn’t worry for a second.
With an extensive range of audio tools and classy themes on the go, iMovie has got it all. Essentially, the great chrome keying ensures productivity in personal and professional life. There are excellent movie templates that bring variety to the lot. As far as the resolution is considered, iMovie comes up with 4K. Isn’t that great?
iMovie is also responsible for your security. Hence, there is no need to worry if your data is on the line. The “Audio Detach” functionality helps remove background music from video. The quick edits and workable interface make iMovie the best for Mac lovers.
Follow our lead to know how to remove background music from video via iMovie.
Step 1: Preliminary Process
To begin, launch iMovie from your Mac computer. Hit “Import Media” to browse the targeted video file. After the video is imported, drag and drop it to the timeline.
Step 2: Removing the Audio
Moving on, use the “Control” button from your keyboard and bring the mouse to the video and click it. Tap on “Detach Audio.” The audio will be separated and shown on the timeline.
Step 3: Sharing the Output
Click on the audio to delete it. After that, click on “Share,” located in the top right corner of the interface. Hit “Export File” from the displayed options. You can change the resolution, quality, description, tag, and compress type from the window that pops up.
Step 4: Final Process
Now, click on “Next,” input the output location and rename the file. Press “Save,” and you are done.
Final Thoughts
We are moving in circles. Sometimes we wish to insert music into the video while struggling to remove it some days. Isn’t that life? Therefore, the article featured three background music removers for online, Windows, and Mac. We expect that the procedure will be of great help to you as you mute your video once and for all.
Versatile Video Editor - Wondershare Filmora
An easy and powerful editor.
Numerous effects and resources.
03 How to Remove Background Music on Mac?
Part 2: How to Remove Background Music on Windows?
Are you into Windows? Do you find Windows more workable than any other operating system? It is good to know! The section provides an overview of Wondershare Filmora . Wondershare Filmora is a perfect background music remover, and there is no denying the fact.
Wondershare Filmora is known for audio and video editing . It is why removing audio from a video is one of the strongest suits of this software. The “Audio Detach” functionality continues to create real chaos in the world. Besides this, creative professionals can rely on Filmora to customize timeline-track controls, fade audio in and out, and perform audio ducking like a pro.
With that said, Filmora splits and adjusts audio with a simple process. Moving on, Wondershare Filmora has a particular specialty in video editing. There are more than 300 effects that make any regular video extraordinary and magical. The motion graphics and animations bring revolution to the workplace and enhance viewer engagement.
Wondershare Filmora is used in the creative industry for changing backgrounds. The motion tracking feature enables you to keep the subject in the frame. Furthermore, do not hesitate to resize videos, and add watermarks, logos, and whatnot. Isn’t that tempting for you?
There is an extensive set of video formats supported by Filmora. For instance, MP4, FLV, AVI, MOV, VOB, 3GP, 3G2, MPG, MPEG, TS, TRP, TP, F4V, M4V, M2TS, MTS, DAT, WMV, MKV, etc.
For Win 7 or later (64-bit)
For macOS 10.12 or later
If you want to know how to remove background music from a video, continue exploring the section. Let us begin!
Step 1: Opening Filmora
Launch Wondershare Filmora from your Windows operating system. The interface appears in a couple of seconds. Click on “New Project” after selecting the aspect ratio for the video. Now, navigate to the “File” located in the top panel. Select “Import Media” and then “Import Media Files.”
Step 2: Importing Process
Use the system to import the file after it is displayed in the Media Library, drag and drop it to the timeline. Change the resolution or frame rate as you deem necessary. After that, the user is directed to right-click on the media in the timeline. Hit “Audio” from the menu.
Step 3: Detaching Process
Select “Detach Audio” from the “Audio” sub-menu. The audio will be detached and shown on the timeline separately from the primary video. Now, please right-click on the audio to delete it. You can also click on it and press “Delete” from the keyboard.
Step 4: Exporting Process
You can preview the video as well to check if the audio is removed permanently or not. The user can export the video now by clicking on the “Export” button. Select the output format and hit “Export” to save the video without background music on your computer.
Part 3: How to Remove Background Music on Mac?
Allow us to introduce you to another background music remover. iMovie is a free tool that comes pre-built in Mac. It has an extremely interactive interface that makes workability flawless. If you are a beginner, you shouldn’t worry for a second.
With an extensive range of audio tools and classy themes on the go, iMovie has got it all. Essentially, the great chrome keying ensures productivity in personal and professional life. There are excellent movie templates that bring variety to the lot. As far as the resolution is considered, iMovie comes up with 4K. Isn’t that great?
iMovie is also responsible for your security. Hence, there is no need to worry if your data is on the line. The “Audio Detach” functionality helps remove background music from video. The quick edits and workable interface make iMovie the best for Mac lovers.
Follow our lead to know how to remove background music from video via iMovie.
Step 1: Preliminary Process
To begin, launch iMovie from your Mac computer. Hit “Import Media” to browse the targeted video file. After the video is imported, drag and drop it to the timeline.
Step 2: Removing the Audio
Moving on, use the “Control” button from your keyboard and bring the mouse to the video and click it. Tap on “Detach Audio.” The audio will be separated and shown on the timeline.
Step 3: Sharing the Output
Click on the audio to delete it. After that, click on “Share,” located in the top right corner of the interface. Hit “Export File” from the displayed options. You can change the resolution, quality, description, tag, and compress type from the window that pops up.
Step 4: Final Process
Now, click on “Next,” input the output location and rename the file. Press “Save,” and you are done.
Final Thoughts
We are moving in circles. Sometimes we wish to insert music into the video while struggling to remove it some days. Isn’t that life? Therefore, the article featured three background music removers for online, Windows, and Mac. We expect that the procedure will be of great help to you as you mute your video once and for all.
Versatile Video Editor - Wondershare Filmora
An easy and powerful editor.
Numerous effects and resources.
03 How to Remove Background Music on Mac?
Part 2: How to Remove Background Music on Windows?
Are you into Windows? Do you find Windows more workable than any other operating system? It is good to know! The section provides an overview of Wondershare Filmora . Wondershare Filmora is a perfect background music remover, and there is no denying the fact.
Wondershare Filmora is known for audio and video editing . It is why removing audio from a video is one of the strongest suits of this software. The “Audio Detach” functionality continues to create real chaos in the world. Besides this, creative professionals can rely on Filmora to customize timeline-track controls, fade audio in and out, and perform audio ducking like a pro.
With that said, Filmora splits and adjusts audio with a simple process. Moving on, Wondershare Filmora has a particular specialty in video editing. There are more than 300 effects that make any regular video extraordinary and magical. The motion graphics and animations bring revolution to the workplace and enhance viewer engagement.
Wondershare Filmora is used in the creative industry for changing backgrounds. The motion tracking feature enables you to keep the subject in the frame. Furthermore, do not hesitate to resize videos, and add watermarks, logos, and whatnot. Isn’t that tempting for you?
There is an extensive set of video formats supported by Filmora. For instance, MP4, FLV, AVI, MOV, VOB, 3GP, 3G2, MPG, MPEG, TS, TRP, TP, F4V, M4V, M2TS, MTS, DAT, WMV, MKV, etc.
For Win 7 or later (64-bit)
For macOS 10.12 or later
If you want to know how to remove background music from a video, continue exploring the section. Let us begin!
Step 1: Opening Filmora
Launch Wondershare Filmora from your Windows operating system. The interface appears in a couple of seconds. Click on “New Project” after selecting the aspect ratio for the video. Now, navigate to the “File” located in the top panel. Select “Import Media” and then “Import Media Files.”
Step 2: Importing Process
Use the system to import the file after it is displayed in the Media Library, drag and drop it to the timeline. Change the resolution or frame rate as you deem necessary. After that, the user is directed to right-click on the media in the timeline. Hit “Audio” from the menu.
Step 3: Detaching Process
Select “Detach Audio” from the “Audio” sub-menu. The audio will be detached and shown on the timeline separately from the primary video. Now, please right-click on the audio to delete it. You can also click on it and press “Delete” from the keyboard.
Step 4: Exporting Process
You can preview the video as well to check if the audio is removed permanently or not. The user can export the video now by clicking on the “Export” button. Select the output format and hit “Export” to save the video without background music on your computer.
Part 3: How to Remove Background Music on Mac?
Allow us to introduce you to another background music remover. iMovie is a free tool that comes pre-built in Mac. It has an extremely interactive interface that makes workability flawless. If you are a beginner, you shouldn’t worry for a second.
With an extensive range of audio tools and classy themes on the go, iMovie has got it all. Essentially, the great chrome keying ensures productivity in personal and professional life. There are excellent movie templates that bring variety to the lot. As far as the resolution is considered, iMovie comes up with 4K. Isn’t that great?
iMovie is also responsible for your security. Hence, there is no need to worry if your data is on the line. The “Audio Detach” functionality helps remove background music from video. The quick edits and workable interface make iMovie the best for Mac lovers.
Follow our lead to know how to remove background music from video via iMovie.
Step 1: Preliminary Process
To begin, launch iMovie from your Mac computer. Hit “Import Media” to browse the targeted video file. After the video is imported, drag and drop it to the timeline.
Step 2: Removing the Audio
Moving on, use the “Control” button from your keyboard and bring the mouse to the video and click it. Tap on “Detach Audio.” The audio will be separated and shown on the timeline.
Step 3: Sharing the Output
Click on the audio to delete it. After that, click on “Share,” located in the top right corner of the interface. Hit “Export File” from the displayed options. You can change the resolution, quality, description, tag, and compress type from the window that pops up.
Step 4: Final Process
Now, click on “Next,” input the output location and rename the file. Press “Save,” and you are done.
Final Thoughts
We are moving in circles. Sometimes we wish to insert music into the video while struggling to remove it some days. Isn’t that life? Therefore, the article featured three background music removers for online, Windows, and Mac. We expect that the procedure will be of great help to you as you mute your video once and for all.
Versatile Video Editor - Wondershare Filmora
An easy and powerful editor.
Numerous effects and resources.
03 How to Remove Background Music on Mac?
Part 2: How to Remove Background Music on Windows?
Are you into Windows? Do you find Windows more workable than any other operating system? It is good to know! The section provides an overview of Wondershare Filmora . Wondershare Filmora is a perfect background music remover, and there is no denying the fact.
Wondershare Filmora is known for audio and video editing . It is why removing audio from a video is one of the strongest suits of this software. The “Audio Detach” functionality continues to create real chaos in the world. Besides this, creative professionals can rely on Filmora to customize timeline-track controls, fade audio in and out, and perform audio ducking like a pro.
With that said, Filmora splits and adjusts audio with a simple process. Moving on, Wondershare Filmora has a particular specialty in video editing. There are more than 300 effects that make any regular video extraordinary and magical. The motion graphics and animations bring revolution to the workplace and enhance viewer engagement.
Wondershare Filmora is used in the creative industry for changing backgrounds. The motion tracking feature enables you to keep the subject in the frame. Furthermore, do not hesitate to resize videos, and add watermarks, logos, and whatnot. Isn’t that tempting for you?
There is an extensive set of video formats supported by Filmora. For instance, MP4, FLV, AVI, MOV, VOB, 3GP, 3G2, MPG, MPEG, TS, TRP, TP, F4V, M4V, M2TS, MTS, DAT, WMV, MKV, etc.
For Win 7 or later (64-bit)
For macOS 10.12 or later
If you want to know how to remove background music from a video, continue exploring the section. Let us begin!
Step 1: Opening Filmora
Launch Wondershare Filmora from your Windows operating system. The interface appears in a couple of seconds. Click on “New Project” after selecting the aspect ratio for the video. Now, navigate to the “File” located in the top panel. Select “Import Media” and then “Import Media Files.”
Step 2: Importing Process
Use the system to import the file after it is displayed in the Media Library, drag and drop it to the timeline. Change the resolution or frame rate as you deem necessary. After that, the user is directed to right-click on the media in the timeline. Hit “Audio” from the menu.
Step 3: Detaching Process
Select “Detach Audio” from the “Audio” sub-menu. The audio will be detached and shown on the timeline separately from the primary video. Now, please right-click on the audio to delete it. You can also click on it and press “Delete” from the keyboard.
Step 4: Exporting Process
You can preview the video as well to check if the audio is removed permanently or not. The user can export the video now by clicking on the “Export” button. Select the output format and hit “Export” to save the video without background music on your computer.
Part 3: How to Remove Background Music on Mac?
Allow us to introduce you to another background music remover. iMovie is a free tool that comes pre-built in Mac. It has an extremely interactive interface that makes workability flawless. If you are a beginner, you shouldn’t worry for a second.
With an extensive range of audio tools and classy themes on the go, iMovie has got it all. Essentially, the great chrome keying ensures productivity in personal and professional life. There are excellent movie templates that bring variety to the lot. As far as the resolution is considered, iMovie comes up with 4K. Isn’t that great?
iMovie is also responsible for your security. Hence, there is no need to worry if your data is on the line. The “Audio Detach” functionality helps remove background music from video. The quick edits and workable interface make iMovie the best for Mac lovers.
Follow our lead to know how to remove background music from video via iMovie.
Step 1: Preliminary Process
To begin, launch iMovie from your Mac computer. Hit “Import Media” to browse the targeted video file. After the video is imported, drag and drop it to the timeline.
Step 2: Removing the Audio
Moving on, use the “Control” button from your keyboard and bring the mouse to the video and click it. Tap on “Detach Audio.” The audio will be separated and shown on the timeline.
Step 3: Sharing the Output
Click on the audio to delete it. After that, click on “Share,” located in the top right corner of the interface. Hit “Export File” from the displayed options. You can change the resolution, quality, description, tag, and compress type from the window that pops up.
Step 4: Final Process
Now, click on “Next,” input the output location and rename the file. Press “Save,” and you are done.
Final Thoughts
We are moving in circles. Sometimes we wish to insert music into the video while struggling to remove it some days. Isn’t that life? Therefore, the article featured three background music removers for online, Windows, and Mac. We expect that the procedure will be of great help to you as you mute your video once and for all.
Versatile Video Editor - Wondershare Filmora
An easy and powerful editor.
Numerous effects and resources.
Also read:
- Updated Perfecting the Playback Speed and Pitch Control for Enhanced Soundscapes in Adobe Rush for 2024
- 2024 Approved Unbeatable Vocal Talent Generators Essential Apps to Explore Online & On Desktops
- 2024 Approved Hear It Here First Effective Techniques for Capturing and Storing Computer-Based Audio Files in Episodic Format
- Updated In 2024, Crafting Emotionally Resonant Films Through the Use of Intense and Thrilling Musical Selections
- Updated In 2024, Are There Better Alternatives to MAGIX Samplitude for Professional Sound Design?
- Updated 2024 Approved Silencing Sounds Five Techniques for Deleting Audio in Digital Footage
- Updated Clear Channel Conductor Innovative Approaches to Standardize Sound Amplitude in Videos for 2024
- The Complete Audio Enhancement Manual From Raw Footage to Final Cut 2023S Methodology
- New Unveiling the Top 8 Sonic Signatures for YouTube Creators Opening Moments
- New Step-by-Step Process for Expeditiously Converting WhatsApp Audio Recordings Into MP3 for 2024
- How to Remove Audio From AVI
- Updated The Art of Decibel Decline Uncovering Sound Management with Audacity for 2024
- New The Ultimate List of Guitar-Friendly Sound Recorders for 2024
- New Harmonic Splitters Easy-to-Employ Perfect for Newcomers & Professionals Alike
- In 2024, Audio Mastery Continues Explore the Best NonAudacity Editors for Windows/Mac/Linux Users
- New Discovering the Best 8 Leading Web-Integrated Voice Recorder Apps
- Updated 2024 Approved Unveiling the Most Cutting-Edge Speech Modification Technologies
- Updated In 2024, Speak in Style, Play to Win Transforming Your Virtual Identity with Morphvox for Streaming Games
- In 2024, Revolutionize Your Call Conversations Top 5 Applications for Modifying Skype Vocal Traits
- New Unveiling the Essential Techniques to Isolate Video Sounds The Future of Sound Extraction Technology
- In-Depth Evaluation The Capabilities and Features of Sound Forge
- New 2024 Approved Multimedia Educational Show Key Insights Demystified
- The Songbird Anthology (MP3 Version) for 2024
- Updated In 2024, Web-Based Echo Eradication Mastering the Art of Noise Cancellation
- Updated The Ultimate Toolkit for Drum Removal A Step-by-Step Online Resource for 2024
- 15 Top Newsroom Ambiance Tracks Compilation for 2024
- Updated Audiovisual Vocal Transformations at No Charge Expert Techniques for Voice Changes in Filmora Projects
- Updated Choreographed Audio Selecting Superior Soundtracks for Montage Masterpieces for 2024
- Updated In 2024, Mastering Vocal Reduction Top Picks of Software, Apps, and Websites
- Updated Lightning-Fast MP3 Division A Comprehensive Guide to Rapidly Splitting Audio Files for 2024
- Essential Steps for Capturing Clear Audio on Your iPhone
- New Talkative Movies Trimmed Down Steps for Eliminating Sound in Popular Video Types (MP4/MKV/AVI/MOV) for 2024
- Updated Complete Guide to Transitioning Sound Elements in Video Content
- Updated Leading Audio Processors for Cutting the Clutter of Unwanted Echoes for 2024
- New Bridging AIFF and MP3 Techniques for High-Quality Audio Conversion for 2024
- Updated In 2024, Leaderboard The Four Premier Music Editors Tailored to macOS
- New 2024 Approved Essential Web-Based Utilities for Enhancing Sound Clarity
- Updated Essential Networks for Non-Friendly Online Discussions Safety, Features, and Fun Factor for 2024
- In 2024, Understanding the Significance of Team Collaboration in Cinematic Projects
- A Practical Approach to Balancing Loudness and Clarity with VLC Normalization
- 2024 Approved Show Audio Waveform and Add Waveform Animation in Final Cut ProTuto
- New In 2024, Mastering Mac Audio Keyframe Techniques in Adobe Premiere Pro
- New In 2024, How to Change Audio Speed and Pitch in Adobe Rush
- Updated Virtual Sound Editor with Cut & Join Features
- Tracking Down Simulated Acoustics From Steel Percussion Devices
- In 2024, The Essential Guide to the Best 7 Audio Editors for Professional Guitarists
- In 2024, The Complete Tutorial on Using Autotune with Audacity Users
- In 2024, What Does Enter PUK Code Mean And Why Did The Sim Get PUK Blocked On Vivo X90S Device
- How to Track a Lost OnePlus Nord 3 5G for Free? | Dr.fone
- Is GSM Flasher ADB Legit? Full Review To Bypass Your Samsung Galaxy S23+FRP Lock
- OnePlus 12R ADB Format Tool for PC vs. Other Unlocking Tools Which One is the Best?
- Move On From WMM 13 Impressive Video Editing Alternatives
- In 2024, How to Mirror PC Screen to Infinix Hot 40 Pro Phones? | Dr.fone
- What Pokémon Evolve with A Dawn Stone For Vivo V27? | Dr.fone
- How To Pause Life360 Location Sharing For Nokia C32 | Dr.fone
- Vivo S17t Stuck on Screen – Finding Solutions For Stuck on Boot | Dr.fone
- Downloading SamFw FRP Tool 3.0 for Vivo Y77t
- New What If YouTube Zoom to Fill Not Working, In 2024
- In 2024, Best 3 Software to Transfer Files to/from Your Vivo S18e via a USB Cable | Dr.fone
- Top IMEI Unlokers for Your Samsung Galaxy Z Flip 5 Phone
- In 2024, Top 4 Ways to Trace Samsung Galaxy Z Fold 5 Location | Dr.fone
- How To Use Special Features - Virtual Location On Itel S23? | Dr.fone
- In 2024, Top 10 Telegram Spy Tools On Xiaomi Redmi Note 13 Pro+ 5G for Parents | Dr.fone
- Ultimate Guide from Xiaomi Redmi K70 FRP Bypass
- In 2024, A Quick Guide to Tecno Spark 10 4G FRP Bypass Instantly
- How Can I Use a Fake GPS Without Mock Location On Asus ROG Phone 7 Ultimate? | Dr.fone
- How to restore wiped call history on Tecno Pova 5?
- Hassle-Free Ways to Remove FRP Lock from Vivo X Fold 2 Phones with/without a PC
- Life360 Learn How Everything Works On Motorola Moto G34 5G | Dr.fone
- The best electronic signature way to sign JPG files online
- How PGSharp Save You from Ban While Spoofing Pokemon Go On Motorola Edge 2023? | Dr.fone
- How to Cast Nokia C110 Screen to PC Using WiFi | Dr.fone
- Best Anti Tracker Software For Honor X7b | Dr.fone
- How To Update or Downgrade iPhone 13 mini Without Losing Data? | Dr.fone
- What to do if your Apple iPhone 14 Pro Max has bad ESN or blacklisted IMEI?
- In 2024, 5 Best Route Generator Apps You Should Try On Honor Magic 6 Lite | Dr.fone
- Hard Reset Honor Play 8T in 3 Efficient Ways | Dr.fone
- 2024 Approved From Photos to Movies Top 5 Slideshow Video Creation Software
- New 2024 Approved If You Want to Improve Your Animation Skills or Look for Professional Animation Software, This Article Will Recommend 8 Best Tools on Mac and Windows
- 6 Solutions to Fix Error 505 in Google Play Store on Xiaomi Mix Fold 3 | Dr.fone
- Unmissable 4K Footage The Best of the Best Video Samples for 2024
- New 2024 Approved All-In-One Video Editor Comparison Find the Perfect Fit for Your Needs
- Android Unlock Code Sim Unlock Your Samsung Galaxy F14 5G Phone and Remove Locked Screen
- In 2024, Heres Everything You Should Know About Pokemon Stops in Detail On Apple iPhone 6 | Dr.fone
- New In 2024, Loop Your Videos with Ease Best Free Software for PC and Mac
- How to Downgrade iPhone X to an Older iOS Version? | Dr.fone
- 2024 Approved Filmora Free Trial vs Torrent Which One Is Safe and Legit?
- Video File Repair - How to Fix Corrupted video files of Honor on Windows?
- 2024 Approved Maximize Your Storage Tips and Tricks for Liberating Space for FCPX
- In 2024, Top 15 Apps To Hack WiFi Password On Vivo T2x 5G
- Title: Updated 2024 Approved Normalizing Audio in DaVinci Resolve A Step-by-Step Guide
- Author: Jacob
- Created at : 2024-05-05 04:02:04
- Updated at : 2024-05-06 04:02:04
- Link: https://audio-shaping.techidaily.com/updated-2024-approved-normalizing-audio-in-davinci-resolve-a-step-by-step-guide/
- License: This work is licensed under CC BY-NC-SA 4.0.