The Ultimate Compilation of the Five-Best Free Audio Intensity Harmonizers

When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!

So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.

With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.

Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.

As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!

So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.

Wondershare Filmora X

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

“Streamlined Techniques for Audio Excision in Mobile and Desktop Video Files”

How to Cut Audio from Video on iPhone/Mac

Liza Brown

Jan 23, 2024• Proven solutions

Having to cut audio from video is not an impossible task but without the right knowledge, it looks difficult. The first thing anyone diving into video editing needs to know is that it requires good software that works with the device you will be using to cut the audio. After understanding the need for software and securing the right one, it is also expedient to know the acceptable audio format that would go well with your editing duties.

In this article, you will not just be exposed to the software to use on iPhone and Mac. But, you will also have a detailed guide of how you can use that software like a pro in editing videos. If this is what you want, continue reading.

Section1. How to mute the audio on the video

Section2. Requirements to extract the music of the video and save

Section 1. How to mute the audio on the video

Part1. Steps to cut the audio from videos on Mac

Part2. Steps to cut the audio from videos on iPhone

Steps to cut the audio from videos on Mac

If you are using a Mac for editing, knowing that Filmora is the best way to go about it is good but knowing how to navigate is key. Not to worry, the steps you need to get started are all listed in these three steps.

Step 1: Import Video to Filmora

Import the video to your Filmora. You can also directly drag the video into the Filmora interface.

Step 2: Mute the audio

After dragging the video to the timeline, right-click the stand-alone video, choose “mute”.

Step 3: Save your edit

Click the “export” button on the interface and select the desired video format

Steps to cut the audio from videos on iPhone

If you want to do the mute on an iPhone, you will need to also follow some steps to get it done on your iMovie.

Step 1: Open the iMovie

Opening the iMovie app goes beyond just clicking it to open, you also have to follow up this process by clicking the continue button that pops up. If the app has opened and you can see an inviting interface, move to the next step.

Step 2: Select a video you want

There are different pages on the interface but your concern is on the project page. On that page, click on the plus sign button as it directs you to start or input a new video. After clicking on the plus sign, it will bring up movies that you would further select.

Don’t hesitate to select the movie you want to edit. Complete the process by clicking the “create movie” button beneath the gallery of movies.

Step 3: Mute the audio

Muting the audio becomes straightforward when you have moved it to the interface. In this step, click on the video clip button as seen in the picture then mute it by selecting the mute option (the picture below shows the mute sign at the lower-left corner) from the audio button. When this is done, your video has been silenced.

Don’t forget to save it when you are done editing by clicking on the “done button” that is visible at the left corner positioned at the top of the screen.

Section 2. Requirements to extract the music of the video and save

There are some times when you just want to extract the audio leaving out the video. Maybe the song accompanying the video is excellent but the video quality is bad, or maybe the video is not as great as the song. Whatever the reason may be, you can extract the music of your video and save it using. The two best apps to do this are Filmora and MP3 Converter -Audio Extractor. Below are the steps to extract audio using Filmora

Step1. import the video into the Filmora

Another way to import a video is to drag and drop the video into the program. Using any of these two steps allows your video to be listed in the media library

Step 2 Next, right-click the video and choose “Audio Detach.” After some time, the video and audio will load as two separate files.

You can choose to delete the video or keep it. If you want to delete it, simply right-click and choose delete. This will remove the video entirely.

Step 3. Edit the extracted audio by doubling clicking on it. When you do, the audio editing tools would be displayed. You can adjust the music volume, change voice, and do other edits.

Step 4. If the audio has some sounds you would like to take out, place your cursor at the exact place you want the deletion to start. Next, press the split button. This step can be used to delete any aspect of the music sound you don’t like.

Step 5. Having extracted, edited, and deleted unnecessary sounds from the music, click the export button. You will be provided with different options to save the audio. Click on the one you prefer.

You can also customize your audio encoder after extracting and saving the music. Simply click Settings to get started.

Conclusion

As previously stated, editing a video requires choosing the right software that would support a successful editing journey. Although there are many options mac users can select from when looking for video editing software, the one that is highly recommended is theFilmora software. Aside from being an easy to use App, it supports a wide range of audio. Audio formats like MP3, MPA, WMA, M4V, WAV are all working well with this software which makes it a great choice.

For iPhone users, a good video editing software that can be used to successfully cut out audio even as a novice is the iMovie. With iMovie software. Video editing is a lot easier and faster with this software. Plus, the software also supports many audio formats which is a good advantage to your editing quest.

Learn More: How to Add Music/ Audio to a GIF on Mac>>>

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Jan 23, 2024• Proven solutions

Having to cut audio from video is not an impossible task but without the right knowledge, it looks difficult. The first thing anyone diving into video editing needs to know is that it requires good software that works with the device you will be using to cut the audio. After understanding the need for software and securing the right one, it is also expedient to know the acceptable audio format that would go well with your editing duties.

In this article, you will not just be exposed to the software to use on iPhone and Mac. But, you will also have a detailed guide of how you can use that software like a pro in editing videos. If this is what you want, continue reading.

Section1. How to mute the audio on the video

Section2. Requirements to extract the music of the video and save

Section 1. How to mute the audio on the video

Part1. Steps to cut the audio from videos on Mac

Part2. Steps to cut the audio from videos on iPhone

Steps to cut the audio from videos on Mac

If you are using a Mac for editing, knowing that Filmora is the best way to go about it is good but knowing how to navigate is key. Not to worry, the steps you need to get started are all listed in these three steps.

Step 1: Import Video to Filmora

Import the video to your Filmora. You can also directly drag the video into the Filmora interface.

Step 2: Mute the audio

After dragging the video to the timeline, right-click the stand-alone video, choose “mute”.

Step 3: Save your edit

Click the “export” button on the interface and select the desired video format

Steps to cut the audio from videos on iPhone

If you want to do the mute on an iPhone, you will need to also follow some steps to get it done on your iMovie.

Step 1: Open the iMovie

Opening the iMovie app goes beyond just clicking it to open, you also have to follow up this process by clicking the continue button that pops up. If the app has opened and you can see an inviting interface, move to the next step.

Step 2: Select a video you want

There are different pages on the interface but your concern is on the project page. On that page, click on the plus sign button as it directs you to start or input a new video. After clicking on the plus sign, it will bring up movies that you would further select.

Don’t hesitate to select the movie you want to edit. Complete the process by clicking the “create movie” button beneath the gallery of movies.

Step 3: Mute the audio

Muting the audio becomes straightforward when you have moved it to the interface. In this step, click on the video clip button as seen in the picture then mute it by selecting the mute option (the picture below shows the mute sign at the lower-left corner) from the audio button. When this is done, your video has been silenced.

Don’t forget to save it when you are done editing by clicking on the “done button” that is visible at the left corner positioned at the top of the screen.

Section 2. Requirements to extract the music of the video and save

There are some times when you just want to extract the audio leaving out the video. Maybe the song accompanying the video is excellent but the video quality is bad, or maybe the video is not as great as the song. Whatever the reason may be, you can extract the music of your video and save it using. The two best apps to do this are Filmora and MP3 Converter -Audio Extractor. Below are the steps to extract audio using Filmora

Step1. import the video into the Filmora

Another way to import a video is to drag and drop the video into the program. Using any of these two steps allows your video to be listed in the media library

Step 2 Next, right-click the video and choose “Audio Detach.” After some time, the video and audio will load as two separate files.

You can choose to delete the video or keep it. If you want to delete it, simply right-click and choose delete. This will remove the video entirely.

Step 3. Edit the extracted audio by doubling clicking on it. When you do, the audio editing tools would be displayed. You can adjust the music volume, change voice, and do other edits.

Step 4. If the audio has some sounds you would like to take out, place your cursor at the exact place you want the deletion to start. Next, press the split button. This step can be used to delete any aspect of the music sound you don’t like.

Step 5. Having extracted, edited, and deleted unnecessary sounds from the music, click the export button. You will be provided with different options to save the audio. Click on the one you prefer.

You can also customize your audio encoder after extracting and saving the music. Simply click Settings to get started.

Conclusion

As previously stated, editing a video requires choosing the right software that would support a successful editing journey. Although there are many options mac users can select from when looking for video editing software, the one that is highly recommended is theFilmora software. Aside from being an easy to use App, it supports a wide range of audio. Audio formats like MP3, MPA, WMA, M4V, WAV are all working well with this software which makes it a great choice.

For iPhone users, a good video editing software that can be used to successfully cut out audio even as a novice is the iMovie. With iMovie software. Video editing is a lot easier and faster with this software. Plus, the software also supports many audio formats which is a good advantage to your editing quest.

Learn More: How to Add Music/ Audio to a GIF on Mac>>>

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Jan 23, 2024• Proven solutions

Having to cut audio from video is not an impossible task but without the right knowledge, it looks difficult. The first thing anyone diving into video editing needs to know is that it requires good software that works with the device you will be using to cut the audio. After understanding the need for software and securing the right one, it is also expedient to know the acceptable audio format that would go well with your editing duties.

In this article, you will not just be exposed to the software to use on iPhone and Mac. But, you will also have a detailed guide of how you can use that software like a pro in editing videos. If this is what you want, continue reading.

Section1. How to mute the audio on the video

Section2. Requirements to extract the music of the video and save

Section 1. How to mute the audio on the video

Part1. Steps to cut the audio from videos on Mac

Part2. Steps to cut the audio from videos on iPhone

Steps to cut the audio from videos on Mac

If you are using a Mac for editing, knowing that Filmora is the best way to go about it is good but knowing how to navigate is key. Not to worry, the steps you need to get started are all listed in these three steps.

Step 1: Import Video to Filmora

Import the video to your Filmora. You can also directly drag the video into the Filmora interface.

Step 2: Mute the audio

After dragging the video to the timeline, right-click the stand-alone video, choose “mute”.

Step 3: Save your edit

Click the “export” button on the interface and select the desired video format

Steps to cut the audio from videos on iPhone

If you want to do the mute on an iPhone, you will need to also follow some steps to get it done on your iMovie.

Step 1: Open the iMovie

Opening the iMovie app goes beyond just clicking it to open, you also have to follow up this process by clicking the continue button that pops up. If the app has opened and you can see an inviting interface, move to the next step.

Step 2: Select a video you want

There are different pages on the interface but your concern is on the project page. On that page, click on the plus sign button as it directs you to start or input a new video. After clicking on the plus sign, it will bring up movies that you would further select.

Don’t hesitate to select the movie you want to edit. Complete the process by clicking the “create movie” button beneath the gallery of movies.

Step 3: Mute the audio

Muting the audio becomes straightforward when you have moved it to the interface. In this step, click on the video clip button as seen in the picture then mute it by selecting the mute option (the picture below shows the mute sign at the lower-left corner) from the audio button. When this is done, your video has been silenced.

Don’t forget to save it when you are done editing by clicking on the “done button” that is visible at the left corner positioned at the top of the screen.

Section 2. Requirements to extract the music of the video and save

There are some times when you just want to extract the audio leaving out the video. Maybe the song accompanying the video is excellent but the video quality is bad, or maybe the video is not as great as the song. Whatever the reason may be, you can extract the music of your video and save it using. The two best apps to do this are Filmora and MP3 Converter -Audio Extractor. Below are the steps to extract audio using Filmora

Step1. import the video into the Filmora

Another way to import a video is to drag and drop the video into the program. Using any of these two steps allows your video to be listed in the media library

Step 2 Next, right-click the video and choose “Audio Detach.” After some time, the video and audio will load as two separate files.

You can choose to delete the video or keep it. If you want to delete it, simply right-click and choose delete. This will remove the video entirely.

Step 3. Edit the extracted audio by doubling clicking on it. When you do, the audio editing tools would be displayed. You can adjust the music volume, change voice, and do other edits.

Step 4. If the audio has some sounds you would like to take out, place your cursor at the exact place you want the deletion to start. Next, press the split button. This step can be used to delete any aspect of the music sound you don’t like.

Step 5. Having extracted, edited, and deleted unnecessary sounds from the music, click the export button. You will be provided with different options to save the audio. Click on the one you prefer.

You can also customize your audio encoder after extracting and saving the music. Simply click Settings to get started.

Conclusion

As previously stated, editing a video requires choosing the right software that would support a successful editing journey. Although there are many options mac users can select from when looking for video editing software, the one that is highly recommended is theFilmora software. Aside from being an easy to use App, it supports a wide range of audio. Audio formats like MP3, MPA, WMA, M4V, WAV are all working well with this software which makes it a great choice.

For iPhone users, a good video editing software that can be used to successfully cut out audio even as a novice is the iMovie. With iMovie software. Video editing is a lot easier and faster with this software. Plus, the software also supports many audio formats which is a good advantage to your editing quest.

Learn More: How to Add Music/ Audio to a GIF on Mac>>>

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Jan 23, 2024• Proven solutions

Having to cut audio from video is not an impossible task but without the right knowledge, it looks difficult. The first thing anyone diving into video editing needs to know is that it requires good software that works with the device you will be using to cut the audio. After understanding the need for software and securing the right one, it is also expedient to know the acceptable audio format that would go well with your editing duties.

In this article, you will not just be exposed to the software to use on iPhone and Mac. But, you will also have a detailed guide of how you can use that software like a pro in editing videos. If this is what you want, continue reading.

Section1. How to mute the audio on the video

Section2. Requirements to extract the music of the video and save

Section 1. How to mute the audio on the video

Part1. Steps to cut the audio from videos on Mac

Part2. Steps to cut the audio from videos on iPhone

Steps to cut the audio from videos on Mac

If you are using a Mac for editing, knowing that Filmora is the best way to go about it is good but knowing how to navigate is key. Not to worry, the steps you need to get started are all listed in these three steps.

Step 1: Import Video to Filmora

Import the video to your Filmora. You can also directly drag the video into the Filmora interface.

Step 2: Mute the audio

After dragging the video to the timeline, right-click the stand-alone video, choose “mute”.

Step 3: Save your edit

Click the “export” button on the interface and select the desired video format

Steps to cut the audio from videos on iPhone

If you want to do the mute on an iPhone, you will need to also follow some steps to get it done on your iMovie.

Step 1: Open the iMovie

Opening the iMovie app goes beyond just clicking it to open, you also have to follow up this process by clicking the continue button that pops up. If the app has opened and you can see an inviting interface, move to the next step.

Step 2: Select a video you want

There are different pages on the interface but your concern is on the project page. On that page, click on the plus sign button as it directs you to start or input a new video. After clicking on the plus sign, it will bring up movies that you would further select.

Don’t hesitate to select the movie you want to edit. Complete the process by clicking the “create movie” button beneath the gallery of movies.

Step 3: Mute the audio

Muting the audio becomes straightforward when you have moved it to the interface. In this step, click on the video clip button as seen in the picture then mute it by selecting the mute option (the picture below shows the mute sign at the lower-left corner) from the audio button. When this is done, your video has been silenced.

Don’t forget to save it when you are done editing by clicking on the “done button” that is visible at the left corner positioned at the top of the screen.

Section 2. Requirements to extract the music of the video and save

There are some times when you just want to extract the audio leaving out the video. Maybe the song accompanying the video is excellent but the video quality is bad, or maybe the video is not as great as the song. Whatever the reason may be, you can extract the music of your video and save it using. The two best apps to do this are Filmora and MP3 Converter -Audio Extractor. Below are the steps to extract audio using Filmora

Step1. import the video into the Filmora

Another way to import a video is to drag and drop the video into the program. Using any of these two steps allows your video to be listed in the media library

Step 2 Next, right-click the video and choose “Audio Detach.” After some time, the video and audio will load as two separate files.

You can choose to delete the video or keep it. If you want to delete it, simply right-click and choose delete. This will remove the video entirely.

Step 3. Edit the extracted audio by doubling clicking on it. When you do, the audio editing tools would be displayed. You can adjust the music volume, change voice, and do other edits.

Step 4. If the audio has some sounds you would like to take out, place your cursor at the exact place you want the deletion to start. Next, press the split button. This step can be used to delete any aspect of the music sound you don’t like.

Step 5. Having extracted, edited, and deleted unnecessary sounds from the music, click the export button. You will be provided with different options to save the audio. Click on the one you prefer.

You can also customize your audio encoder after extracting and saving the music. Simply click Settings to get started.

Conclusion

As previously stated, editing a video requires choosing the right software that would support a successful editing journey. Although there are many options mac users can select from when looking for video editing software, the one that is highly recommended is theFilmora software. Aside from being an easy to use App, it supports a wide range of audio. Audio formats like MP3, MPA, WMA, M4V, WAV are all working well with this software which makes it a great choice.

For iPhone users, a good video editing software that can be used to successfully cut out audio even as a novice is the iMovie. With iMovie software. Video editing is a lot easier and faster with this software. Plus, the software also supports many audio formats which is a good advantage to your editing quest.

Learn More: How to Add Music/ Audio to a GIF on Mac>>>

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Where Can I Find Bell Sound Effect?

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Chiming into a perfect sound effect is quite challenging as any mistake in this might flop the impact of the sound. It will be a lot of pressure to take a responsibility of matching the perfect bell sound and its effect to bring the right music. Here we will help you to know where you can find the best bell sound effects. Reading this article will give you an idea of where to get the bell sound effects and where to download them from.

In this article

01 [Ways to Download Various Sound Effects](#Part 1)

02 [Use Filmora to Add Sound Effects in Your Video](#Part 2)

Part 1 Ways to Download Various Sound Effects

There are many ways to download or get various sound effects including bell sound effects. With overwhelming sites offering the options to download free bell sound effects for your videos, you might still have to take lot of measures to select the best effect that suits your video. With various types of Chimes ranging from hourly intervals, and generic bells – there are sites that provides free downloading effects suitable for different purposes. These sounds on the sites have been recorded professionally and thus you will not be finding any noises or other disturbing effects while you are matching them with your videos.

Here are some of the ways where you can download all kinds of sound effects that are free to use.

1. Download from Some YouTube Video

As YouTube doesn’t allow downloading videos directly to your device all the time unless the video owner allow it, you need to use third party websites that allows users to convert YouTube videos into MP3 files. MP3FY is an awesome website that will allow you to download the audio part of the YouTube video that you want to download. Here is how you can do it.

Step 1: First you need to visit MP3FY website from your computer browser.

Step 2: Next you need to copy the video link from YouTube and paste the link into the box.

Step 3: Then click on the Convert button and click Confirm after that so that you can verify the video.

Step 4: Finally you need to click on the Download MP3 button to Save the MP3 file to your computer, where you can play it in your favorite music player or simply use it to add into any video of your choice.

Another way to download audio from YouTube video is by converting a video to MP3 directly from YouTube. Here is how.

Step 1: First you need to add the letters fy between youtube and .com in the URL for the YouTube video you want to convert.

Step 2: This will take you to the MP3FY website, where you need to follow the same steps like before to convert and download the MP3 file.

2. Make Bell Sound Effect by Yourself

If you have FL Studio and 3xOSC plugin then you can easily create bell sounds mp3 effect by yourself. The process is a bit technical but we’ll get you through this process step by step.

Step 1: First you need to load 3xOsc to your FL Studio project and choose Sine Wave as the shape for the Oscillator 1. Also, for this process, we’ll only need ONE oscillator so disable the Osc 2 & Osc 3 by turning their volume levels to 0%.

Step 2: Next you need to navigate to the “Instrument Properties (INS)” tab and from there select “VOL” subtab (volume envelope) and click on the “Use envelope” button to enable it. Then you need to edit the envelope curve to look like below image (short Attack time, quite low Sustain level and semi-long Release time is the key here).

Step 3: Next, you need to click on the “TNS” button (Tension) to edit the envelope line shapes a bit. We need to lower the tension level of Decay to add sharper “drop” from the Decay to Sustain. This will make the bell sound sharper for you. Also lower the tension level between Sustain and Release so that it doesn’t let the long Release to be too dominant

Step 4: Finally, you need to add that spacious depth and color to the sound via Fruity Reeverb. So, you can assign the 3xOsc to a free mixer track and drop a Fruity Reeverb to its effect slot. You need to set it like – “Color to Warmer (all the way to right – to make the reverb sound less metallic), Decay to 7 sec (long Decay time is the key here to make the bell sound huge and atmospheric), HighDamping to OFF and Reverb level to 24%”.

3.Zapsplat

Here in this site, you can find almost more than 200 bell sound effects ranging from small bells to long sound bell sound effects. The site offers loads of other generic bells that can be used that are available in various formats.

4.Orange Free Sounds

If you wanted to enjoy free bell sound effects for your video, this is the right site where you can find numerous sound effects that are available free for you. With various range of bell sound effects including small bell, church bell toning, elevator bell sound effects, bell ringing sound effects, and other related ones are available that can be matched with your video effects.

5.A Sound Effect

Here is another site where you can get amazing bell sound effects with clear and high-quality audios. These sound effects are tuned to the lovely musical notes and are recorded by experts so you will not find any flaws. The files once downloaded can be used directly as these are trimmed and attached in easy format to use in videos. The files are available in almost all the format to help you download them as per your video.

6.FreeSFX

If you can’t find suitable bell sound for your video, you will surely find it in this site. The FreeSFX site have a great collection of free bell sound effects of all ranges and they don’t just stop with this. They update the site with new bell sounds often and so you can make your videos with these latest ones uploaded on the site.

Part 2 Use Filmora to Add Sound Effects in Your Video

The Filmora is the best editor enabling you to enjoy the music along with your video with the incorporation of its powerful features. You can edit the audio detaching it separately from the video. As it is an easy-to-use tool that makes flawless blending of audio and video, you can now relish the best music and video in single file.

Features

• The audio mixer feature helps user to edit audio files separately.
• Various effects including audio fade in and out helps to adjust the background audio easily.
• Enhances the video clarity adding the stunning effects and it has the huge collection of audios.
• Contains royal free music collections and sound effects.

Guide to Add Sound Effects to Video with Filmora

Step 1: Go to the Filmora official website, install wonder share Filmora and lunch it. Once it’s launched, you will find a tab just below the menu bar, tap media, and click import. After this, there will be a drop-down where you can click on import media files and choose the video file. Repeat the process to pick the desired background music. You can also use build-in music tracks to add music to your video by selecting the Music tab.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 2: Now you can navigate over the video you imported to Filmora, then tap on the sign ‘+’on it alternatively; you can drag down to the timeline the media file.

Step 3: Now edit your music by double-tapping the audio from the timeline. It will display the audio panel at the top of the screen. You can use it to set the desired equalizer, manage pitch volume and speed. You can also use the forum to fade in or fade out.

Step 4: Finally, you can now export the video that has made the desired changes by clicking ‘export’ on the toolbar to export the video. You can now save the exported in the desired format and remember to rename it directly.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

Conclusion

If you are looking for the merging of audio to video, then you don’t have to be panic. All you need to do is to add some background music to video using Filmora tools. In this you are free to choose any bell music to match your video file online without much trouble or looking for an expert to get this done for you. With the above rich features, Filmora software enhances your video by merging audio.

Try It Free Try It Free

Chiming into a perfect sound effect is quite challenging as any mistake in this might flop the impact of the sound. It will be a lot of pressure to take a responsibility of matching the perfect bell sound and its effect to bring the right music. Here we will help you to know where you can find the best bell sound effects. Reading this article will give you an idea of where to get the bell sound effects and where to download them from.

In this article

01 [Ways to Download Various Sound Effects](#Part 1)

02 [Use Filmora to Add Sound Effects in Your Video](#Part 2)

Part 1 Ways to Download Various Sound Effects

There are many ways to download or get various sound effects including bell sound effects. With overwhelming sites offering the options to download free bell sound effects for your videos, you might still have to take lot of measures to select the best effect that suits your video. With various types of Chimes ranging from hourly intervals, and generic bells – there are sites that provides free downloading effects suitable for different purposes. These sounds on the sites have been recorded professionally and thus you will not be finding any noises or other disturbing effects while you are matching them with your videos.

Here are some of the ways where you can download all kinds of sound effects that are free to use.

1. Download from Some YouTube Video

As YouTube doesn’t allow downloading videos directly to your device all the time unless the video owner allow it, you need to use third party websites that allows users to convert YouTube videos into MP3 files. MP3FY is an awesome website that will allow you to download the audio part of the YouTube video that you want to download. Here is how you can do it.

Step 1: First you need to visit MP3FY website from your computer browser.

Step 2: Next you need to copy the video link from YouTube and paste the link into the box.

Step 3: Then click on the Convert button and click Confirm after that so that you can verify the video.

Step 4: Finally you need to click on the Download MP3 button to Save the MP3 file to your computer, where you can play it in your favorite music player or simply use it to add into any video of your choice.

Another way to download audio from YouTube video is by converting a video to MP3 directly from YouTube. Here is how.

Step 1: First you need to add the letters fy between youtube and .com in the URL for the YouTube video you want to convert.

Step 2: This will take you to the MP3FY website, where you need to follow the same steps like before to convert and download the MP3 file.

2. Make Bell Sound Effect by Yourself

If you have FL Studio and 3xOSC plugin then you can easily create bell sounds mp3 effect by yourself. The process is a bit technical but we’ll get you through this process step by step.

Step 1: First you need to load 3xOsc to your FL Studio project and choose Sine Wave as the shape for the Oscillator 1. Also, for this process, we’ll only need ONE oscillator so disable the Osc 2 & Osc 3 by turning their volume levels to 0%.

Step 2: Next you need to navigate to the “Instrument Properties (INS)” tab and from there select “VOL” subtab (volume envelope) and click on the “Use envelope” button to enable it. Then you need to edit the envelope curve to look like below image (short Attack time, quite low Sustain level and semi-long Release time is the key here).

Step 3: Next, you need to click on the “TNS” button (Tension) to edit the envelope line shapes a bit. We need to lower the tension level of Decay to add sharper “drop” from the Decay to Sustain. This will make the bell sound sharper for you. Also lower the tension level between Sustain and Release so that it doesn’t let the long Release to be too dominant

Step 4: Finally, you need to add that spacious depth and color to the sound via Fruity Reeverb. So, you can assign the 3xOsc to a free mixer track and drop a Fruity Reeverb to its effect slot. You need to set it like – “Color to Warmer (all the way to right – to make the reverb sound less metallic), Decay to 7 sec (long Decay time is the key here to make the bell sound huge and atmospheric), HighDamping to OFF and Reverb level to 24%”.

3.Zapsplat

Here in this site, you can find almost more than 200 bell sound effects ranging from small bells to long sound bell sound effects. The site offers loads of other generic bells that can be used that are available in various formats.

4.Orange Free Sounds

If you wanted to enjoy free bell sound effects for your video, this is the right site where you can find numerous sound effects that are available free for you. With various range of bell sound effects including small bell, church bell toning, elevator bell sound effects, bell ringing sound effects, and other related ones are available that can be matched with your video effects.

5.A Sound Effect

Here is another site where you can get amazing bell sound effects with clear and high-quality audios. These sound effects are tuned to the lovely musical notes and are recorded by experts so you will not find any flaws. The files once downloaded can be used directly as these are trimmed and attached in easy format to use in videos. The files are available in almost all the format to help you download them as per your video.

6.FreeSFX

If you can’t find suitable bell sound for your video, you will surely find it in this site. The FreeSFX site have a great collection of free bell sound effects of all ranges and they don’t just stop with this. They update the site with new bell sounds often and so you can make your videos with these latest ones uploaded on the site.

Part 2 Use Filmora to Add Sound Effects in Your Video

The Filmora is the best editor enabling you to enjoy the music along with your video with the incorporation of its powerful features. You can edit the audio detaching it separately from the video. As it is an easy-to-use tool that makes flawless blending of audio and video, you can now relish the best music and video in single file.

Features

• The audio mixer feature helps user to edit audio files separately.
• Various effects including audio fade in and out helps to adjust the background audio easily.
• Enhances the video clarity adding the stunning effects and it has the huge collection of audios.
• Contains royal free music collections and sound effects.

Guide to Add Sound Effects to Video with Filmora

Step 1: Go to the Filmora official website, install wonder share Filmora and lunch it. Once it’s launched, you will find a tab just below the menu bar, tap media, and click import. After this, there will be a drop-down where you can click on import media files and choose the video file. Repeat the process to pick the desired background music. You can also use build-in music tracks to add music to your video by selecting the Music tab.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 2: Now you can navigate over the video you imported to Filmora, then tap on the sign ‘+’on it alternatively; you can drag down to the timeline the media file.

Step 3: Now edit your music by double-tapping the audio from the timeline. It will display the audio panel at the top of the screen. You can use it to set the desired equalizer, manage pitch volume and speed. You can also use the forum to fade in or fade out.

Step 4: Finally, you can now export the video that has made the desired changes by clicking ‘export’ on the toolbar to export the video. You can now save the exported in the desired format and remember to rename it directly.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

Conclusion

If you are looking for the merging of audio to video, then you don’t have to be panic. All you need to do is to add some background music to video using Filmora tools. In this you are free to choose any bell music to match your video file online without much trouble or looking for an expert to get this done for you. With the above rich features, Filmora software enhances your video by merging audio.

Try It Free Try It Free

Chiming into a perfect sound effect is quite challenging as any mistake in this might flop the impact of the sound. It will be a lot of pressure to take a responsibility of matching the perfect bell sound and its effect to bring the right music. Here we will help you to know where you can find the best bell sound effects. Reading this article will give you an idea of where to get the bell sound effects and where to download them from.

In this article

01 [Ways to Download Various Sound Effects](#Part 1)

02 [Use Filmora to Add Sound Effects in Your Video](#Part 2)

Part 1 Ways to Download Various Sound Effects

There are many ways to download or get various sound effects including bell sound effects. With overwhelming sites offering the options to download free bell sound effects for your videos, you might still have to take lot of measures to select the best effect that suits your video. With various types of Chimes ranging from hourly intervals, and generic bells – there are sites that provides free downloading effects suitable for different purposes. These sounds on the sites have been recorded professionally and thus you will not be finding any noises or other disturbing effects while you are matching them with your videos.

Here are some of the ways where you can download all kinds of sound effects that are free to use.

1. Download from Some YouTube Video

As YouTube doesn’t allow downloading videos directly to your device all the time unless the video owner allow it, you need to use third party websites that allows users to convert YouTube videos into MP3 files. MP3FY is an awesome website that will allow you to download the audio part of the YouTube video that you want to download. Here is how you can do it.

Step 1: First you need to visit MP3FY website from your computer browser.

Step 2: Next you need to copy the video link from YouTube and paste the link into the box.

Step 3: Then click on the Convert button and click Confirm after that so that you can verify the video.

Step 4: Finally you need to click on the Download MP3 button to Save the MP3 file to your computer, where you can play it in your favorite music player or simply use it to add into any video of your choice.

Another way to download audio from YouTube video is by converting a video to MP3 directly from YouTube. Here is how.

Step 1: First you need to add the letters fy between youtube and .com in the URL for the YouTube video you want to convert.

Step 2: This will take you to the MP3FY website, where you need to follow the same steps like before to convert and download the MP3 file.

2. Make Bell Sound Effect by Yourself

If you have FL Studio and 3xOSC plugin then you can easily create bell sounds mp3 effect by yourself. The process is a bit technical but we’ll get you through this process step by step.

Step 1: First you need to load 3xOsc to your FL Studio project and choose Sine Wave as the shape for the Oscillator 1. Also, for this process, we’ll only need ONE oscillator so disable the Osc 2 & Osc 3 by turning their volume levels to 0%.

Step 2: Next you need to navigate to the “Instrument Properties (INS)” tab and from there select “VOL” subtab (volume envelope) and click on the “Use envelope” button to enable it. Then you need to edit the envelope curve to look like below image (short Attack time, quite low Sustain level and semi-long Release time is the key here).

Step 3: Next, you need to click on the “TNS” button (Tension) to edit the envelope line shapes a bit. We need to lower the tension level of Decay to add sharper “drop” from the Decay to Sustain. This will make the bell sound sharper for you. Also lower the tension level between Sustain and Release so that it doesn’t let the long Release to be too dominant

Step 4: Finally, you need to add that spacious depth and color to the sound via Fruity Reeverb. So, you can assign the 3xOsc to a free mixer track and drop a Fruity Reeverb to its effect slot. You need to set it like – “Color to Warmer (all the way to right – to make the reverb sound less metallic), Decay to 7 sec (long Decay time is the key here to make the bell sound huge and atmospheric), HighDamping to OFF and Reverb level to 24%”.

3.Zapsplat

Here in this site, you can find almost more than 200 bell sound effects ranging from small bells to long sound bell sound effects. The site offers loads of other generic bells that can be used that are available in various formats.

4.Orange Free Sounds

If you wanted to enjoy free bell sound effects for your video, this is the right site where you can find numerous sound effects that are available free for you. With various range of bell sound effects including small bell, church bell toning, elevator bell sound effects, bell ringing sound effects, and other related ones are available that can be matched with your video effects.

5.A Sound Effect

Here is another site where you can get amazing bell sound effects with clear and high-quality audios. These sound effects are tuned to the lovely musical notes and are recorded by experts so you will not find any flaws. The files once downloaded can be used directly as these are trimmed and attached in easy format to use in videos. The files are available in almost all the format to help you download them as per your video.

6.FreeSFX

If you can’t find suitable bell sound for your video, you will surely find it in this site. The FreeSFX site have a great collection of free bell sound effects of all ranges and they don’t just stop with this. They update the site with new bell sounds often and so you can make your videos with these latest ones uploaded on the site.

Part 2 Use Filmora to Add Sound Effects in Your Video

The Filmora is the best editor enabling you to enjoy the music along with your video with the incorporation of its powerful features. You can edit the audio detaching it separately from the video. As it is an easy-to-use tool that makes flawless blending of audio and video, you can now relish the best music and video in single file.

Features

• The audio mixer feature helps user to edit audio files separately.
• Various effects including audio fade in and out helps to adjust the background audio easily.
• Enhances the video clarity adding the stunning effects and it has the huge collection of audios.
• Contains royal free music collections and sound effects.

Guide to Add Sound Effects to Video with Filmora

Step 1: Go to the Filmora official website, install wonder share Filmora and lunch it. Once it’s launched, you will find a tab just below the menu bar, tap media, and click import. After this, there will be a drop-down where you can click on import media files and choose the video file. Repeat the process to pick the desired background music. You can also use build-in music tracks to add music to your video by selecting the Music tab.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 2: Now you can navigate over the video you imported to Filmora, then tap on the sign ‘+’on it alternatively; you can drag down to the timeline the media file.

Step 3: Now edit your music by double-tapping the audio from the timeline. It will display the audio panel at the top of the screen. You can use it to set the desired equalizer, manage pitch volume and speed. You can also use the forum to fade in or fade out.

Step 4: Finally, you can now export the video that has made the desired changes by clicking ‘export’ on the toolbar to export the video. You can now save the exported in the desired format and remember to rename it directly.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

Conclusion

If you are looking for the merging of audio to video, then you don’t have to be panic. All you need to do is to add some background music to video using Filmora tools. In this you are free to choose any bell music to match your video file online without much trouble or looking for an expert to get this done for you. With the above rich features, Filmora software enhances your video by merging audio.

Try It Free Try It Free

Chiming into a perfect sound effect is quite challenging as any mistake in this might flop the impact of the sound. It will be a lot of pressure to take a responsibility of matching the perfect bell sound and its effect to bring the right music. Here we will help you to know where you can find the best bell sound effects. Reading this article will give you an idea of where to get the bell sound effects and where to download them from.

In this article

01 [Ways to Download Various Sound Effects](#Part 1)

02 [Use Filmora to Add Sound Effects in Your Video](#Part 2)

Part 1 Ways to Download Various Sound Effects

There are many ways to download or get various sound effects including bell sound effects. With overwhelming sites offering the options to download free bell sound effects for your videos, you might still have to take lot of measures to select the best effect that suits your video. With various types of Chimes ranging from hourly intervals, and generic bells – there are sites that provides free downloading effects suitable for different purposes. These sounds on the sites have been recorded professionally and thus you will not be finding any noises or other disturbing effects while you are matching them with your videos.

Here are some of the ways where you can download all kinds of sound effects that are free to use.

1. Download from Some YouTube Video

As YouTube doesn’t allow downloading videos directly to your device all the time unless the video owner allow it, you need to use third party websites that allows users to convert YouTube videos into MP3 files. MP3FY is an awesome website that will allow you to download the audio part of the YouTube video that you want to download. Here is how you can do it.

Step 1: First you need to visit MP3FY website from your computer browser.

Step 2: Next you need to copy the video link from YouTube and paste the link into the box.

Step 3: Then click on the Convert button and click Confirm after that so that you can verify the video.

Step 4: Finally you need to click on the Download MP3 button to Save the MP3 file to your computer, where you can play it in your favorite music player or simply use it to add into any video of your choice.

Another way to download audio from YouTube video is by converting a video to MP3 directly from YouTube. Here is how.

Step 1: First you need to add the letters fy between youtube and .com in the URL for the YouTube video you want to convert.

Step 2: This will take you to the MP3FY website, where you need to follow the same steps like before to convert and download the MP3 file.

2. Make Bell Sound Effect by Yourself

If you have FL Studio and 3xOSC plugin then you can easily create bell sounds mp3 effect by yourself. The process is a bit technical but we’ll get you through this process step by step.

Step 1: First you need to load 3xOsc to your FL Studio project and choose Sine Wave as the shape for the Oscillator 1. Also, for this process, we’ll only need ONE oscillator so disable the Osc 2 & Osc 3 by turning their volume levels to 0%.

Step 2: Next you need to navigate to the “Instrument Properties (INS)” tab and from there select “VOL” subtab (volume envelope) and click on the “Use envelope” button to enable it. Then you need to edit the envelope curve to look like below image (short Attack time, quite low Sustain level and semi-long Release time is the key here).

Step 3: Next, you need to click on the “TNS” button (Tension) to edit the envelope line shapes a bit. We need to lower the tension level of Decay to add sharper “drop” from the Decay to Sustain. This will make the bell sound sharper for you. Also lower the tension level between Sustain and Release so that it doesn’t let the long Release to be too dominant

Step 4: Finally, you need to add that spacious depth and color to the sound via Fruity Reeverb. So, you can assign the 3xOsc to a free mixer track and drop a Fruity Reeverb to its effect slot. You need to set it like – “Color to Warmer (all the way to right – to make the reverb sound less metallic), Decay to 7 sec (long Decay time is the key here to make the bell sound huge and atmospheric), HighDamping to OFF and Reverb level to 24%”.

3.Zapsplat

Here in this site, you can find almost more than 200 bell sound effects ranging from small bells to long sound bell sound effects. The site offers loads of other generic bells that can be used that are available in various formats.

4.Orange Free Sounds

If you wanted to enjoy free bell sound effects for your video, this is the right site where you can find numerous sound effects that are available free for you. With various range of bell sound effects including small bell, church bell toning, elevator bell sound effects, bell ringing sound effects, and other related ones are available that can be matched with your video effects.

5.A Sound Effect

Here is another site where you can get amazing bell sound effects with clear and high-quality audios. These sound effects are tuned to the lovely musical notes and are recorded by experts so you will not find any flaws. The files once downloaded can be used directly as these are trimmed and attached in easy format to use in videos. The files are available in almost all the format to help you download them as per your video.

6.FreeSFX

If you can’t find suitable bell sound for your video, you will surely find it in this site. The FreeSFX site have a great collection of free bell sound effects of all ranges and they don’t just stop with this. They update the site with new bell sounds often and so you can make your videos with these latest ones uploaded on the site.

Part 2 Use Filmora to Add Sound Effects in Your Video

The Filmora is the best editor enabling you to enjoy the music along with your video with the incorporation of its powerful features. You can edit the audio detaching it separately from the video. As it is an easy-to-use tool that makes flawless blending of audio and video, you can now relish the best music and video in single file.

Features

• The audio mixer feature helps user to edit audio files separately.
• Various effects including audio fade in and out helps to adjust the background audio easily.
• Enhances the video clarity adding the stunning effects and it has the huge collection of audios.
• Contains royal free music collections and sound effects.

Guide to Add Sound Effects to Video with Filmora

Step 1: Go to the Filmora official website, install wonder share Filmora and lunch it. Once it’s launched, you will find a tab just below the menu bar, tap media, and click import. After this, there will be a drop-down where you can click on import media files and choose the video file. Repeat the process to pick the desired background music. You can also use build-in music tracks to add music to your video by selecting the Music tab.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 2: Now you can navigate over the video you imported to Filmora, then tap on the sign ‘+’on it alternatively; you can drag down to the timeline the media file.

Step 3: Now edit your music by double-tapping the audio from the timeline. It will display the audio panel at the top of the screen. You can use it to set the desired equalizer, manage pitch volume and speed. You can also use the forum to fade in or fade out.

Step 4: Finally, you can now export the video that has made the desired changes by clicking ‘export’ on the toolbar to export the video. You can now save the exported in the desired format and remember to rename it directly.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

Conclusion

If you are looking for the merging of audio to video, then you don’t have to be panic. All you need to do is to add some background music to video using Filmora tools. In this you are free to choose any bell music to match your video file online without much trouble or looking for an expert to get this done for you. With the above rich features, Filmora software enhances your video by merging audio.

Also read: