New The Pros Method for Smooth On-Off Sound Dynamics Using Adobe After Effects for 2024
The Pro’s Method for Smooth On-Off Sound Dynamics Using Adobe After Effects
How to Fade In and Fade Out Audio in Adobe After Effects
Benjamin Arango
Mar 27, 2024• Proven solutions
Many of us get the first association when Adobe After Effects is mentioned: stunning motion graphics and breathtaking visual effects. Very few people think of audio editing when they talk about AE, even though this application offers a simple way to add Fade in and fade out effects to audio files used in soundtracks.
However, you will need to have at least basic video and sound editing skills to fade in and fade out audio files in AE since the app doesn’t offer a preset that you can drag and drop to the timeline. So, in this article, we will show how to create the Fade in and fade out effects in Adobe After Effects in just a few simple steps.
Read More to Get: Best Audio Mixer Software to Trim Your Sound Easily >>
Adding the Fade In and Fade Out Effects to Audio Files in AE
Step 1: Check audio waveform in After Effects
Once you’ve created a new project in AE and you’ve imported the audio files you’d like to include in the soundtrack of the video you’re making, you should place that audio file on the timeline. Click on the arrow located next to the audio file, then click on the Audio arrow that will be displayed under the file, and finally click on the Waveform arrow. This will enable you to see the waveform of the audio file you’d like to edit on the timeline and allow you to add Fade in and fade out effects with more precision. The file you added to your composition will be displayed as a layer in the Composition tab located in the lower-left region of the software’s interface.
Step 2: Add a keyframe to the audio file
The next thing you will have to do is place the playhead at the exact location where you want the Fade In effect to start. In most cases, Fade effects are added at the starting point of the audio file, so you should position the playhead at the beginning of the timeline or zero seconds. You will be able to see a stopwatch next to the Audio Levels option located in the Composition tab. Click on it to add the first keyframe and assign a negative value to the Audio Level setting. -100db or -50db values will make the audio file silent, and you can pick either based on how long you want the Fade in effect to last. If you don’t know how to use keyframes in After Effects, this article will give you some info .
You may also like: 15 Free After Effects Templates to Power up Your Video
Step 3: Complete Fade out/in audio in After Effects
Move the playhead to the location where you want the effect to end and add another keyframe by clicking on the ‘Add or remove keyframe at current time’ icon. Set the Audio Level value to 0db, and that is it. You’ve created the Fade in effect. Keep in mind that you can use more than two keyframes to fade in audio, enabling you to increase the audio level gradually. The process of creating the Fade effect requires you to add a keyframe that has a 0db value a few seconds before the clip ends and then add another keyframe at the very end of the audio file that has -50 or -100db audio level value.
Tips For Making Better Fade In and Fade Out Effects
The process of creating a fade in or a fade out effect in AE is quite simple, but it is up to you to discover creative ways of using these effects. Here are a few tips that can help you use these audio effects more creatively.
1. Avoid Hard Cuts
A high pitch sound at the very begging of a new sequence can ruin your soundtrack and ultimately the entire video, so in case you’ve cut an audio file at the location where the sound peaks, you can apply a fade in effect to make the transition between two audio files softer.
You may also like: How to Cut Video in After Effects
2. Be Mindful of Audio Compression
Audio compression is a process that reduces loud sounds and amplifies quiet sounds, resulting from the audio file’s dynamic range being compressed. In most cases, you won’t notice the effects of audio compression, but if you compress an audio file too much, you might get some unwanted side effects if you add a fade out effect to that file. That’s why it is best to rely on the default audio compression features a video or audio editing app offers.
3. Use the Fade In and Fade Out Effects Creatively
Besides opening and closing scenes, you can also use the Fade in and fade out effects to mix two different tracks while the shot is still in progress. Fade out one track, make it look like a scene is ending, and then introduce a new theme that changes the mood of that scene. The important thing is to avoid reducing the audio level all the way to -100db because you might end up creating silence in a scene that disrupts the flow of an entire video.
Conclusion
Fading in or fading out audio files in Adobe After Effects doesn’t require much effort, as you have to add a few keyframes to the file and adjust the Audio Level value. However, finding the best way to improve the quality of your soundtrack by applying these effects may take some practice. Do you often add Fade in and fade out audio effects in AE? Leave a comment below and share your experiences with us.
If you want to fade in/out audio easily, we recommend using Filmora . It is designed for people who wish to edit professional videos with simple-to-use features. Besides Fade in/out audio in Filmora, you can automatically sync audio to video. Download it now to have a try (free)!
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
Many of us get the first association when Adobe After Effects is mentioned: stunning motion graphics and breathtaking visual effects. Very few people think of audio editing when they talk about AE, even though this application offers a simple way to add Fade in and fade out effects to audio files used in soundtracks.
However, you will need to have at least basic video and sound editing skills to fade in and fade out audio files in AE since the app doesn’t offer a preset that you can drag and drop to the timeline. So, in this article, we will show how to create the Fade in and fade out effects in Adobe After Effects in just a few simple steps.
Read More to Get: Best Audio Mixer Software to Trim Your Sound Easily >>
Adding the Fade In and Fade Out Effects to Audio Files in AE
Step 1: Check audio waveform in After Effects
Once you’ve created a new project in AE and you’ve imported the audio files you’d like to include in the soundtrack of the video you’re making, you should place that audio file on the timeline. Click on the arrow located next to the audio file, then click on the Audio arrow that will be displayed under the file, and finally click on the Waveform arrow. This will enable you to see the waveform of the audio file you’d like to edit on the timeline and allow you to add Fade in and fade out effects with more precision. The file you added to your composition will be displayed as a layer in the Composition tab located in the lower-left region of the software’s interface.
Step 2: Add a keyframe to the audio file
The next thing you will have to do is place the playhead at the exact location where you want the Fade In effect to start. In most cases, Fade effects are added at the starting point of the audio file, so you should position the playhead at the beginning of the timeline or zero seconds. You will be able to see a stopwatch next to the Audio Levels option located in the Composition tab. Click on it to add the first keyframe and assign a negative value to the Audio Level setting. -100db or -50db values will make the audio file silent, and you can pick either based on how long you want the Fade in effect to last. If you don’t know how to use keyframes in After Effects, this article will give you some info .
You may also like: 15 Free After Effects Templates to Power up Your Video
Step 3: Complete Fade out/in audio in After Effects
Move the playhead to the location where you want the effect to end and add another keyframe by clicking on the ‘Add or remove keyframe at current time’ icon. Set the Audio Level value to 0db, and that is it. You’ve created the Fade in effect. Keep in mind that you can use more than two keyframes to fade in audio, enabling you to increase the audio level gradually. The process of creating the Fade effect requires you to add a keyframe that has a 0db value a few seconds before the clip ends and then add another keyframe at the very end of the audio file that has -50 or -100db audio level value.
Tips For Making Better Fade In and Fade Out Effects
The process of creating a fade in or a fade out effect in AE is quite simple, but it is up to you to discover creative ways of using these effects. Here are a few tips that can help you use these audio effects more creatively.
1. Avoid Hard Cuts
A high pitch sound at the very begging of a new sequence can ruin your soundtrack and ultimately the entire video, so in case you’ve cut an audio file at the location where the sound peaks, you can apply a fade in effect to make the transition between two audio files softer.
You may also like: How to Cut Video in After Effects
2. Be Mindful of Audio Compression
Audio compression is a process that reduces loud sounds and amplifies quiet sounds, resulting from the audio file’s dynamic range being compressed. In most cases, you won’t notice the effects of audio compression, but if you compress an audio file too much, you might get some unwanted side effects if you add a fade out effect to that file. That’s why it is best to rely on the default audio compression features a video or audio editing app offers.
3. Use the Fade In and Fade Out Effects Creatively
Besides opening and closing scenes, you can also use the Fade in and fade out effects to mix two different tracks while the shot is still in progress. Fade out one track, make it look like a scene is ending, and then introduce a new theme that changes the mood of that scene. The important thing is to avoid reducing the audio level all the way to -100db because you might end up creating silence in a scene that disrupts the flow of an entire video.
Conclusion
Fading in or fading out audio files in Adobe After Effects doesn’t require much effort, as you have to add a few keyframes to the file and adjust the Audio Level value. However, finding the best way to improve the quality of your soundtrack by applying these effects may take some practice. Do you often add Fade in and fade out audio effects in AE? Leave a comment below and share your experiences with us.
If you want to fade in/out audio easily, we recommend using Filmora . It is designed for people who wish to edit professional videos with simple-to-use features. Besides Fade in/out audio in Filmora, you can automatically sync audio to video. Download it now to have a try (free)!
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
Many of us get the first association when Adobe After Effects is mentioned: stunning motion graphics and breathtaking visual effects. Very few people think of audio editing when they talk about AE, even though this application offers a simple way to add Fade in and fade out effects to audio files used in soundtracks.
However, you will need to have at least basic video and sound editing skills to fade in and fade out audio files in AE since the app doesn’t offer a preset that you can drag and drop to the timeline. So, in this article, we will show how to create the Fade in and fade out effects in Adobe After Effects in just a few simple steps.
Read More to Get: Best Audio Mixer Software to Trim Your Sound Easily >>
Adding the Fade In and Fade Out Effects to Audio Files in AE
Step 1: Check audio waveform in After Effects
Once you’ve created a new project in AE and you’ve imported the audio files you’d like to include in the soundtrack of the video you’re making, you should place that audio file on the timeline. Click on the arrow located next to the audio file, then click on the Audio arrow that will be displayed under the file, and finally click on the Waveform arrow. This will enable you to see the waveform of the audio file you’d like to edit on the timeline and allow you to add Fade in and fade out effects with more precision. The file you added to your composition will be displayed as a layer in the Composition tab located in the lower-left region of the software’s interface.
Step 2: Add a keyframe to the audio file
The next thing you will have to do is place the playhead at the exact location where you want the Fade In effect to start. In most cases, Fade effects are added at the starting point of the audio file, so you should position the playhead at the beginning of the timeline or zero seconds. You will be able to see a stopwatch next to the Audio Levels option located in the Composition tab. Click on it to add the first keyframe and assign a negative value to the Audio Level setting. -100db or -50db values will make the audio file silent, and you can pick either based on how long you want the Fade in effect to last. If you don’t know how to use keyframes in After Effects, this article will give you some info .
You may also like: 15 Free After Effects Templates to Power up Your Video
Step 3: Complete Fade out/in audio in After Effects
Move the playhead to the location where you want the effect to end and add another keyframe by clicking on the ‘Add or remove keyframe at current time’ icon. Set the Audio Level value to 0db, and that is it. You’ve created the Fade in effect. Keep in mind that you can use more than two keyframes to fade in audio, enabling you to increase the audio level gradually. The process of creating the Fade effect requires you to add a keyframe that has a 0db value a few seconds before the clip ends and then add another keyframe at the very end of the audio file that has -50 or -100db audio level value.
Tips For Making Better Fade In and Fade Out Effects
The process of creating a fade in or a fade out effect in AE is quite simple, but it is up to you to discover creative ways of using these effects. Here are a few tips that can help you use these audio effects more creatively.
1. Avoid Hard Cuts
A high pitch sound at the very begging of a new sequence can ruin your soundtrack and ultimately the entire video, so in case you’ve cut an audio file at the location where the sound peaks, you can apply a fade in effect to make the transition between two audio files softer.
You may also like: How to Cut Video in After Effects
2. Be Mindful of Audio Compression
Audio compression is a process that reduces loud sounds and amplifies quiet sounds, resulting from the audio file’s dynamic range being compressed. In most cases, you won’t notice the effects of audio compression, but if you compress an audio file too much, you might get some unwanted side effects if you add a fade out effect to that file. That’s why it is best to rely on the default audio compression features a video or audio editing app offers.
3. Use the Fade In and Fade Out Effects Creatively
Besides opening and closing scenes, you can also use the Fade in and fade out effects to mix two different tracks while the shot is still in progress. Fade out one track, make it look like a scene is ending, and then introduce a new theme that changes the mood of that scene. The important thing is to avoid reducing the audio level all the way to -100db because you might end up creating silence in a scene that disrupts the flow of an entire video.
Conclusion
Fading in or fading out audio files in Adobe After Effects doesn’t require much effort, as you have to add a few keyframes to the file and adjust the Audio Level value. However, finding the best way to improve the quality of your soundtrack by applying these effects may take some practice. Do you often add Fade in and fade out audio effects in AE? Leave a comment below and share your experiences with us.
If you want to fade in/out audio easily, we recommend using Filmora . It is designed for people who wish to edit professional videos with simple-to-use features. Besides Fade in/out audio in Filmora, you can automatically sync audio to video. Download it now to have a try (free)!
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Mar 27, 2024• Proven solutions
Many of us get the first association when Adobe After Effects is mentioned: stunning motion graphics and breathtaking visual effects. Very few people think of audio editing when they talk about AE, even though this application offers a simple way to add Fade in and fade out effects to audio files used in soundtracks.
However, you will need to have at least basic video and sound editing skills to fade in and fade out audio files in AE since the app doesn’t offer a preset that you can drag and drop to the timeline. So, in this article, we will show how to create the Fade in and fade out effects in Adobe After Effects in just a few simple steps.
Read More to Get: Best Audio Mixer Software to Trim Your Sound Easily >>
Adding the Fade In and Fade Out Effects to Audio Files in AE
Step 1: Check audio waveform in After Effects
Once you’ve created a new project in AE and you’ve imported the audio files you’d like to include in the soundtrack of the video you’re making, you should place that audio file on the timeline. Click on the arrow located next to the audio file, then click on the Audio arrow that will be displayed under the file, and finally click on the Waveform arrow. This will enable you to see the waveform of the audio file you’d like to edit on the timeline and allow you to add Fade in and fade out effects with more precision. The file you added to your composition will be displayed as a layer in the Composition tab located in the lower-left region of the software’s interface.
Step 2: Add a keyframe to the audio file
The next thing you will have to do is place the playhead at the exact location where you want the Fade In effect to start. In most cases, Fade effects are added at the starting point of the audio file, so you should position the playhead at the beginning of the timeline or zero seconds. You will be able to see a stopwatch next to the Audio Levels option located in the Composition tab. Click on it to add the first keyframe and assign a negative value to the Audio Level setting. -100db or -50db values will make the audio file silent, and you can pick either based on how long you want the Fade in effect to last. If you don’t know how to use keyframes in After Effects, this article will give you some info .
You may also like: 15 Free After Effects Templates to Power up Your Video
Step 3: Complete Fade out/in audio in After Effects
Move the playhead to the location where you want the effect to end and add another keyframe by clicking on the ‘Add or remove keyframe at current time’ icon. Set the Audio Level value to 0db, and that is it. You’ve created the Fade in effect. Keep in mind that you can use more than two keyframes to fade in audio, enabling you to increase the audio level gradually. The process of creating the Fade effect requires you to add a keyframe that has a 0db value a few seconds before the clip ends and then add another keyframe at the very end of the audio file that has -50 or -100db audio level value.
Tips For Making Better Fade In and Fade Out Effects
The process of creating a fade in or a fade out effect in AE is quite simple, but it is up to you to discover creative ways of using these effects. Here are a few tips that can help you use these audio effects more creatively.
1. Avoid Hard Cuts
A high pitch sound at the very begging of a new sequence can ruin your soundtrack and ultimately the entire video, so in case you’ve cut an audio file at the location where the sound peaks, you can apply a fade in effect to make the transition between two audio files softer.
You may also like: How to Cut Video in After Effects
2. Be Mindful of Audio Compression
Audio compression is a process that reduces loud sounds and amplifies quiet sounds, resulting from the audio file’s dynamic range being compressed. In most cases, you won’t notice the effects of audio compression, but if you compress an audio file too much, you might get some unwanted side effects if you add a fade out effect to that file. That’s why it is best to rely on the default audio compression features a video or audio editing app offers.
3. Use the Fade In and Fade Out Effects Creatively
Besides opening and closing scenes, you can also use the Fade in and fade out effects to mix two different tracks while the shot is still in progress. Fade out one track, make it look like a scene is ending, and then introduce a new theme that changes the mood of that scene. The important thing is to avoid reducing the audio level all the way to -100db because you might end up creating silence in a scene that disrupts the flow of an entire video.
Conclusion
Fading in or fading out audio files in Adobe After Effects doesn’t require much effort, as you have to add a few keyframes to the file and adjust the Audio Level value. However, finding the best way to improve the quality of your soundtrack by applying these effects may take some practice. Do you often add Fade in and fade out audio effects in AE? Leave a comment below and share your experiences with us.
If you want to fade in/out audio easily, we recommend using Filmora . It is designed for people who wish to edit professional videos with simple-to-use features. Besides Fade in/out audio in Filmora, you can automatically sync audio to video. Download it now to have a try (free)!
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Digital Audio Trimmer and Merger Tool
Online Audio & Mp3 Cutter, Audio Trimmer is a simple online tool which lets you trim your audio files on the fly. Choose your file and click Upload to get started! Uploaded files are stored in a temporary folder and automatically removed from the server within two hours.
It always makes me exciting that we can cut MP3 files and merge several parts into one file using those mp3 cutter and joiner software. For example, nowadays most people use MP3 cutter software to cut the best part of a song as their ringtones or cut the best part of many different songs and merge them into one song. And here’s a list of best free 8 mp3 cutter and joiner software recommend for you. These let you cut pieces of audio from audio files easily. These free software offer various features, like cutting MP3 audio files, fade in and fade out, choosing start point and end point, create ringtones for mobile phones from audio files, create various sound clips for presentations, making of audio books, making of jokes etc
Filmora Audio Recorder
Record computer system audio
Capture microphone audio
Customize recording volume
Record screen and webcam as well
1. AudioTrimmer
Totally free and easy to use! With our simple interface, editing audio is very easy. Just upload your track, select the part you want to cut out, and click crop. Your trimmed sound track will be ready within seconds. AudioTrimmer is designed to work on most modern devices including tablets and mobile phones.
Steps on Using AudioTrimmer
- Click and navigate to AudioTrimmer’s online audio removal tool to get started.
- Choose an audio file from your device.
- On the next screen, click the **Modebutton and put the tool into “Remove” mode.
- Click and drag the slider handles to select the unwanted part of the audio that you want to delete.
- Click **Cropto cut the selected part out of your song. This will delete that unwanted part of the audio and seamlessly combine the remaining parts into one.
- Now you can download your new shortened song.
2. AUDIO JOINER
Free of charge online application aimed at joining a few audio tracks into one. This service supports multiple formats and allows you to apply cross-fade mixing to an unlimited amount of tracks. Audio joiner works in the browser and doesn’t require installment of any applications. You just need to upload file, apply required effects and tap “Join” button - so you get the result.
Steps on Using Audio Joiner
Once you arrive at Audio Joiner, you will be told to add music tracks of your choice, from files you have downloaded on your computer. As an example, I will be using the songs that I used to make the mashup that is playing during this presentation.
Start by clicking on “Add Tracks”
Click on the blue sliders on the bottom of the track and drag it left or right (or use your left/right arrow keys) to edit how long you want the song to play. You can also choose which part of the track to play specifically as well.
Your screen will open up to your files and ask you to select your songs. Choose as many music files (mp3 is best) as you want to add. For this example, I will be using 3 songs.
Just wait for it to join the files and.
Your finished! Just download your new mash-up and you’re done! You are then able to resume editing your song, or start over with a new one.
3. AUDIO JOINER
Audio Joiner is designed to merge several songs (mp3, m4a, wav, etc) into a single track. The program is absolutely free and operates online; therefore you don’t need to install it on your computer. Just open the browser and start merging. Merge multiple audio files into a single track.
Steps to Follow While Using an Audio Joiner
- Open Online Audio Joiner website.
- Add audio tracks.
- Set the order of playback.
- Adjust the intervals.
- Select the mode of joining.
- Next, click the “Join” button.
- After the tracks have been joined, click “Download” link to save the composition on your hard drive.
4.ONLINE AUDIO JOINER
The Online Audio Combiner lets you convert your music file to a desired format and use crossfade between your merged songs. What does joining audio mean?
When you join audio files, you’re combining them so multiple files will exist as a single audio file. There are both online audio joining sites and offline audio merging software programs you can use. You can delete those sections you don’t desire and then merge the other clips together to make a continuous file.
How to Merge Audio Files Online
STEP 1
Select an audio file
To put your songs together, you can add two or more files from your PC, Mac, Android or iPhone. It’s also possible to upload them from your Dropbox or Google Drive account. Each file can be up to 500 MB for free.
STEP 2
Combine MP3 and other audio
If you want, you can add more tracks to merge. Then drag and drop them until you’re satisfied with the order. It’s possible to convert and crossfade the music file if it’s necessary. Take a look at the how-to guide to understand better how to combine audio files.
STEP 3
Save the result
And it’s done! Now you can listen to the joined audio to make sure you like it. If it’s so, download it to your device or back to cloud storage. Otherwise, just go back to editing.
CONCLUSION
Merging audios is combining several audio files into one. We usually select the songs whose styles are similar with each other. Then, we can adjust the playback speed and combine them into a new one. Besides, we can mix two songs. For example, we can mix the narrator’s words into a song. By this way, listeners can understand the meaning while enjoying the songs.
1. AudioTrimmer
Totally free and easy to use! With our simple interface, editing audio is very easy. Just upload your track, select the part you want to cut out, and click crop. Your trimmed sound track will be ready within seconds. AudioTrimmer is designed to work on most modern devices including tablets and mobile phones.
Steps on Using AudioTrimmer
- Click and navigate to AudioTrimmer’s online audio removal tool to get started.
- Choose an audio file from your device.
- On the next screen, click the **Modebutton and put the tool into “Remove” mode.
- Click and drag the slider handles to select the unwanted part of the audio that you want to delete.
- Click **Cropto cut the selected part out of your song. This will delete that unwanted part of the audio and seamlessly combine the remaining parts into one.
- Now you can download your new shortened song.
2. AUDIO JOINER
Free of charge online application aimed at joining a few audio tracks into one. This service supports multiple formats and allows you to apply cross-fade mixing to an unlimited amount of tracks. Audio joiner works in the browser and doesn’t require installment of any applications. You just need to upload file, apply required effects and tap “Join” button - so you get the result.
Steps on Using Audio Joiner
Once you arrive at Audio Joiner, you will be told to add music tracks of your choice, from files you have downloaded on your computer. As an example, I will be using the songs that I used to make the mashup that is playing during this presentation.
Start by clicking on “Add Tracks”
Click on the blue sliders on the bottom of the track and drag it left or right (or use your left/right arrow keys) to edit how long you want the song to play. You can also choose which part of the track to play specifically as well.
Your screen will open up to your files and ask you to select your songs. Choose as many music files (mp3 is best) as you want to add. For this example, I will be using 3 songs.
Just wait for it to join the files and.
Your finished! Just download your new mash-up and you’re done! You are then able to resume editing your song, or start over with a new one.
3. AUDIO JOINER
Audio Joiner is designed to merge several songs (mp3, m4a, wav, etc) into a single track. The program is absolutely free and operates online; therefore you don’t need to install it on your computer. Just open the browser and start merging. Merge multiple audio files into a single track.
Steps to Follow While Using an Audio Joiner
- Open Online Audio Joiner website.
- Add audio tracks.
- Set the order of playback.
- Adjust the intervals.
- Select the mode of joining.
- Next, click the “Join” button.
- After the tracks have been joined, click “Download” link to save the composition on your hard drive.
4.ONLINE AUDIO JOINER
The Online Audio Combiner lets you convert your music file to a desired format and use crossfade between your merged songs. What does joining audio mean?
When you join audio files, you’re combining them so multiple files will exist as a single audio file. There are both online audio joining sites and offline audio merging software programs you can use. You can delete those sections you don’t desire and then merge the other clips together to make a continuous file.
How to Merge Audio Files Online
STEP 1
Select an audio file
To put your songs together, you can add two or more files from your PC, Mac, Android or iPhone. It’s also possible to upload them from your Dropbox or Google Drive account. Each file can be up to 500 MB for free.
STEP 2
Combine MP3 and other audio
If you want, you can add more tracks to merge. Then drag and drop them until you’re satisfied with the order. It’s possible to convert and crossfade the music file if it’s necessary. Take a look at the how-to guide to understand better how to combine audio files.
STEP 3
Save the result
And it’s done! Now you can listen to the joined audio to make sure you like it. If it’s so, download it to your device or back to cloud storage. Otherwise, just go back to editing.
CONCLUSION
Merging audios is combining several audio files into one. We usually select the songs whose styles are similar with each other. Then, we can adjust the playback speed and combine them into a new one. Besides, we can mix two songs. For example, we can mix the narrator’s words into a song. By this way, listeners can understand the meaning while enjoying the songs.
1. AudioTrimmer
Totally free and easy to use! With our simple interface, editing audio is very easy. Just upload your track, select the part you want to cut out, and click crop. Your trimmed sound track will be ready within seconds. AudioTrimmer is designed to work on most modern devices including tablets and mobile phones.
Steps on Using AudioTrimmer
- Click and navigate to AudioTrimmer’s online audio removal tool to get started.
- Choose an audio file from your device.
- On the next screen, click the **Modebutton and put the tool into “Remove” mode.
- Click and drag the slider handles to select the unwanted part of the audio that you want to delete.
- Click **Cropto cut the selected part out of your song. This will delete that unwanted part of the audio and seamlessly combine the remaining parts into one.
- Now you can download your new shortened song.
2. AUDIO JOINER
Free of charge online application aimed at joining a few audio tracks into one. This service supports multiple formats and allows you to apply cross-fade mixing to an unlimited amount of tracks. Audio joiner works in the browser and doesn’t require installment of any applications. You just need to upload file, apply required effects and tap “Join” button - so you get the result.
Steps on Using Audio Joiner
Once you arrive at Audio Joiner, you will be told to add music tracks of your choice, from files you have downloaded on your computer. As an example, I will be using the songs that I used to make the mashup that is playing during this presentation.
Start by clicking on “Add Tracks”
Click on the blue sliders on the bottom of the track and drag it left or right (or use your left/right arrow keys) to edit how long you want the song to play. You can also choose which part of the track to play specifically as well.
Your screen will open up to your files and ask you to select your songs. Choose as many music files (mp3 is best) as you want to add. For this example, I will be using 3 songs.
Just wait for it to join the files and.
Your finished! Just download your new mash-up and you’re done! You are then able to resume editing your song, or start over with a new one.
3. AUDIO JOINER
Audio Joiner is designed to merge several songs (mp3, m4a, wav, etc) into a single track. The program is absolutely free and operates online; therefore you don’t need to install it on your computer. Just open the browser and start merging. Merge multiple audio files into a single track.
Steps to Follow While Using an Audio Joiner
- Open Online Audio Joiner website.
- Add audio tracks.
- Set the order of playback.
- Adjust the intervals.
- Select the mode of joining.
- Next, click the “Join” button.
- After the tracks have been joined, click “Download” link to save the composition on your hard drive.
4.ONLINE AUDIO JOINER
The Online Audio Combiner lets you convert your music file to a desired format and use crossfade between your merged songs. What does joining audio mean?
When you join audio files, you’re combining them so multiple files will exist as a single audio file. There are both online audio joining sites and offline audio merging software programs you can use. You can delete those sections you don’t desire and then merge the other clips together to make a continuous file.
How to Merge Audio Files Online
STEP 1
Select an audio file
To put your songs together, you can add two or more files from your PC, Mac, Android or iPhone. It’s also possible to upload them from your Dropbox or Google Drive account. Each file can be up to 500 MB for free.
STEP 2
Combine MP3 and other audio
If you want, you can add more tracks to merge. Then drag and drop them until you’re satisfied with the order. It’s possible to convert and crossfade the music file if it’s necessary. Take a look at the how-to guide to understand better how to combine audio files.
STEP 3
Save the result
And it’s done! Now you can listen to the joined audio to make sure you like it. If it’s so, download it to your device or back to cloud storage. Otherwise, just go back to editing.
CONCLUSION
Merging audios is combining several audio files into one. We usually select the songs whose styles are similar with each other. Then, we can adjust the playback speed and combine them into a new one. Besides, we can mix two songs. For example, we can mix the narrator’s words into a song. By this way, listeners can understand the meaning while enjoying the songs.
1. AudioTrimmer
Totally free and easy to use! With our simple interface, editing audio is very easy. Just upload your track, select the part you want to cut out, and click crop. Your trimmed sound track will be ready within seconds. AudioTrimmer is designed to work on most modern devices including tablets and mobile phones.
Steps on Using AudioTrimmer
- Click and navigate to AudioTrimmer’s online audio removal tool to get started.
- Choose an audio file from your device.
- On the next screen, click the **Modebutton and put the tool into “Remove” mode.
- Click and drag the slider handles to select the unwanted part of the audio that you want to delete.
- Click **Cropto cut the selected part out of your song. This will delete that unwanted part of the audio and seamlessly combine the remaining parts into one.
- Now you can download your new shortened song.
2. AUDIO JOINER
Free of charge online application aimed at joining a few audio tracks into one. This service supports multiple formats and allows you to apply cross-fade mixing to an unlimited amount of tracks. Audio joiner works in the browser and doesn’t require installment of any applications. You just need to upload file, apply required effects and tap “Join” button - so you get the result.
Steps on Using Audio Joiner
Once you arrive at Audio Joiner, you will be told to add music tracks of your choice, from files you have downloaded on your computer. As an example, I will be using the songs that I used to make the mashup that is playing during this presentation.
Start by clicking on “Add Tracks”
Click on the blue sliders on the bottom of the track and drag it left or right (or use your left/right arrow keys) to edit how long you want the song to play. You can also choose which part of the track to play specifically as well.
Your screen will open up to your files and ask you to select your songs. Choose as many music files (mp3 is best) as you want to add. For this example, I will be using 3 songs.
Just wait for it to join the files and.
Your finished! Just download your new mash-up and you’re done! You are then able to resume editing your song, or start over with a new one.
3. AUDIO JOINER
Audio Joiner is designed to merge several songs (mp3, m4a, wav, etc) into a single track. The program is absolutely free and operates online; therefore you don’t need to install it on your computer. Just open the browser and start merging. Merge multiple audio files into a single track.
Steps to Follow While Using an Audio Joiner
- Open Online Audio Joiner website.
- Add audio tracks.
- Set the order of playback.
- Adjust the intervals.
- Select the mode of joining.
- Next, click the “Join” button.
- After the tracks have been joined, click “Download” link to save the composition on your hard drive.
4.ONLINE AUDIO JOINER
The Online Audio Combiner lets you convert your music file to a desired format and use crossfade between your merged songs. What does joining audio mean?
When you join audio files, you’re combining them so multiple files will exist as a single audio file. There are both online audio joining sites and offline audio merging software programs you can use. You can delete those sections you don’t desire and then merge the other clips together to make a continuous file.
How to Merge Audio Files Online
STEP 1
Select an audio file
To put your songs together, you can add two or more files from your PC, Mac, Android or iPhone. It’s also possible to upload them from your Dropbox or Google Drive account. Each file can be up to 500 MB for free.
STEP 2
Combine MP3 and other audio
If you want, you can add more tracks to merge. Then drag and drop them until you’re satisfied with the order. It’s possible to convert and crossfade the music file if it’s necessary. Take a look at the how-to guide to understand better how to combine audio files.
STEP 3
Save the result
And it’s done! Now you can listen to the joined audio to make sure you like it. If it’s so, download it to your device or back to cloud storage. Otherwise, just go back to editing.
CONCLUSION
Merging audios is combining several audio files into one. We usually select the songs whose styles are similar with each other. Then, we can adjust the playback speed and combine them into a new one. Besides, we can mix two songs. For example, we can mix the narrator’s words into a song. By this way, listeners can understand the meaning while enjoying the songs.
Elevate Your Video Edits: Mastering the Art of Live Audio Dampening with Final Cut Pro X’s AutoDuck Capabilities
How to Do Automatic Audio Ducking in Final Cut Pro X
Benjamin Arango
Oct 26, 2023• Proven solutions
If you are working in post-production, then you might be familiar with the concept of audio ducking. In nutshell, it is a process in which the background sound of a clip is reduced and the voiceover is amplified. Therefore, with the help of sound ducking, we can focus on the dialogues without a noisy background track.
Lately, a lot of people have asked us about the process to do automatic audio ducking in Final Cut Pro X. Since it is a clip-based editing tool, it lacks a dedicated mixer to help us do FCPX audio ducking. Thankfully, there are third-party plugins and tools (like the FCPX AutoDuck) that can help us do the same. In this post, I will let you know how to do audio ducking in Final Cut Pro and its best alternative.
If you don’t want to use any plugins, see this article: How to sync in FCPX.
Part 1: How to Perform Audio Ducking in Final Cut Pro X?
If you have a video in which you have background music and a voiceover, then you can perform sound ducking in it. This will automatically enhance the quality of the voiceover and would mellow down the background music selectively. Sadly, the feature of audio ducking in Final Cut Pro has to be done manually as there are no instant automatic options in the tool presently.
Therefore, you can use any reliable third-party FCPX tool like Audified or AutoDuck to meet your requirements. For instance, let’s consider the example of FCPX AutoDuck, which is a paid macOS application. To perform FCPX audio ducking, you first have to export the music and voiceover as two dedicated files. Later, you can import them to FCPX AutoDuck to perform auto-ducking of the music.
Step 1: Export the Music Files
To perform audio ducking in Final Cut Pro, you can first launch the application on Mac and open your project. Since there is no FCPX audio ducking option, you first have to export the music files.
For this, you can just go to the main menu on Final Cut Pro and select File > Share > Master File. This will help you explore and save all the media files from Final Cut Pro.
Now, once the Master File window would be opened, you can go to the “Role” tab and select “Audio Only” as the output role. This will display a list of the background music and the voiceover file.
You can now select the files of your choice and click on the “Next” button to save them to any desired location on your Mac.
Step 2: Use FCPX AutoDuck to Do Automatic Sound Ducking
Great! Now, you can just open the FCPX AutoDuck application on your Mac via its Application or Spotlight. You can just give it a project name and drag-and-drop the speaker (voiceover) and the music files here. If you want, you can also import a filler file of your choice.
FCPX will also let you select the level of music ducking from its dedication option. There are also different options to set up things like setting up the window or pre-roll for the audio.
In the end, you can click on the “Duck” button and let FCPX AutoDuck perform automatic audio ducking on the files.
Step 3: Insert the Modified File to your Project
Once the FCPX audio ducking process is completed, it will generate an XML file. You can now just drag the XML file and drop it to your project in Final Cut Pro. Here, you can choose to select the XML file in the same project.
You can now copy the modified music clip, go to the timeline, and paste it at the starting of the video. Here, you can just mute the previous music clip and let the auto-duck audio play instead.
Part 2: The Best FCPX Alternative for Mac to Perform Automatic Audio Ducking
As you can see, it is pretty tough to do audio ducking in Final Cut Pro as there is no automatic feature in the tool. Therefore, you can consider using Wondershare Filmora for Mac to perform automatic sound ducking and save your time. It is an inbuilt feature in Filmora that would perform auto-ducking instantly, and you can also mark the level of ducking in the video.
Ideally, you can perform audio ducking on voiceover or another soundtrack in Wondershare Filmora. To perform music ducking via Wondershare Filmora on Mac, you can follow these steps:
Step 1: Import the Video Clip or Record Your Audio
To begin with, just launch Wondershare Filmora on your Mac and just drag-and-drop your media files to the application. You can also go to its menu and choose to import media files.
Once your video is imported, you can drag it to the timeline at the bottom to work on it. If you want, you can click on the voiceover icon (adjacent to the preview section) to record dialogues right away.
Apart from that, you can also import music files to your video or use the extensive range of royalty-free audio files that are available in Filmora.
Step 2: Perform Automatic Audio Ducking
Great! Now, on the timeline of Filmora, you can see your video and the music track. From here, you need to select the track that you want to amplify (like the voiceover).
Afterward, right-click the audio track and select the “Adjust Audio” option from the context menu.
This will open a dedicated Audio Mixer window on the screen. Just go to the Audio tab and enable the “Ducking” option to lower the volume of other audio tracks. You can also select the desired level for music ducking to implement.
Step 3: Export the Edited Video
That’s it! After performing audio ducking on Filmora, you can preview the results and further make the needed changes. In the end, you can click on the “Export” button and save the file in the format and resolution of your choice.
There you go! After following this guide, you can easily learn how to do audio ducking in Final Cut Pro X easily. Since there is no inbuilt FCPX audio ducking option, you can use a third-party tool like FCPX AutoDuck. Apart from that, if you are looking for a better alternative to do sound ducking, then simply use Wondershare Filmora. It is a user-friendly and resourceful application that would let you perform automatic music ducking like a pro.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Oct 26, 2023• Proven solutions
If you are working in post-production, then you might be familiar with the concept of audio ducking. In nutshell, it is a process in which the background sound of a clip is reduced and the voiceover is amplified. Therefore, with the help of sound ducking, we can focus on the dialogues without a noisy background track.
Lately, a lot of people have asked us about the process to do automatic audio ducking in Final Cut Pro X. Since it is a clip-based editing tool, it lacks a dedicated mixer to help us do FCPX audio ducking. Thankfully, there are third-party plugins and tools (like the FCPX AutoDuck) that can help us do the same. In this post, I will let you know how to do audio ducking in Final Cut Pro and its best alternative.
If you don’t want to use any plugins, see this article: How to sync in FCPX.
Part 1: How to Perform Audio Ducking in Final Cut Pro X?
If you have a video in which you have background music and a voiceover, then you can perform sound ducking in it. This will automatically enhance the quality of the voiceover and would mellow down the background music selectively. Sadly, the feature of audio ducking in Final Cut Pro has to be done manually as there are no instant automatic options in the tool presently.
Therefore, you can use any reliable third-party FCPX tool like Audified or AutoDuck to meet your requirements. For instance, let’s consider the example of FCPX AutoDuck, which is a paid macOS application. To perform FCPX audio ducking, you first have to export the music and voiceover as two dedicated files. Later, you can import them to FCPX AutoDuck to perform auto-ducking of the music.
Step 1: Export the Music Files
To perform audio ducking in Final Cut Pro, you can first launch the application on Mac and open your project. Since there is no FCPX audio ducking option, you first have to export the music files.
For this, you can just go to the main menu on Final Cut Pro and select File > Share > Master File. This will help you explore and save all the media files from Final Cut Pro.
Now, once the Master File window would be opened, you can go to the “Role” tab and select “Audio Only” as the output role. This will display a list of the background music and the voiceover file.
You can now select the files of your choice and click on the “Next” button to save them to any desired location on your Mac.
Step 2: Use FCPX AutoDuck to Do Automatic Sound Ducking
Great! Now, you can just open the FCPX AutoDuck application on your Mac via its Application or Spotlight. You can just give it a project name and drag-and-drop the speaker (voiceover) and the music files here. If you want, you can also import a filler file of your choice.
FCPX will also let you select the level of music ducking from its dedication option. There are also different options to set up things like setting up the window or pre-roll for the audio.
In the end, you can click on the “Duck” button and let FCPX AutoDuck perform automatic audio ducking on the files.
Step 3: Insert the Modified File to your Project
Once the FCPX audio ducking process is completed, it will generate an XML file. You can now just drag the XML file and drop it to your project in Final Cut Pro. Here, you can choose to select the XML file in the same project.
You can now copy the modified music clip, go to the timeline, and paste it at the starting of the video. Here, you can just mute the previous music clip and let the auto-duck audio play instead.
Part 2: The Best FCPX Alternative for Mac to Perform Automatic Audio Ducking
As you can see, it is pretty tough to do audio ducking in Final Cut Pro as there is no automatic feature in the tool. Therefore, you can consider using Wondershare Filmora for Mac to perform automatic sound ducking and save your time. It is an inbuilt feature in Filmora that would perform auto-ducking instantly, and you can also mark the level of ducking in the video.
Ideally, you can perform audio ducking on voiceover or another soundtrack in Wondershare Filmora. To perform music ducking via Wondershare Filmora on Mac, you can follow these steps:
Step 1: Import the Video Clip or Record Your Audio
To begin with, just launch Wondershare Filmora on your Mac and just drag-and-drop your media files to the application. You can also go to its menu and choose to import media files.
Once your video is imported, you can drag it to the timeline at the bottom to work on it. If you want, you can click on the voiceover icon (adjacent to the preview section) to record dialogues right away.
Apart from that, you can also import music files to your video or use the extensive range of royalty-free audio files that are available in Filmora.
Step 2: Perform Automatic Audio Ducking
Great! Now, on the timeline of Filmora, you can see your video and the music track. From here, you need to select the track that you want to amplify (like the voiceover).
Afterward, right-click the audio track and select the “Adjust Audio” option from the context menu.
This will open a dedicated Audio Mixer window on the screen. Just go to the Audio tab and enable the “Ducking” option to lower the volume of other audio tracks. You can also select the desired level for music ducking to implement.
Step 3: Export the Edited Video
That’s it! After performing audio ducking on Filmora, you can preview the results and further make the needed changes. In the end, you can click on the “Export” button and save the file in the format and resolution of your choice.
There you go! After following this guide, you can easily learn how to do audio ducking in Final Cut Pro X easily. Since there is no inbuilt FCPX audio ducking option, you can use a third-party tool like FCPX AutoDuck. Apart from that, if you are looking for a better alternative to do sound ducking, then simply use Wondershare Filmora. It is a user-friendly and resourceful application that would let you perform automatic music ducking like a pro.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Oct 26, 2023• Proven solutions
If you are working in post-production, then you might be familiar with the concept of audio ducking. In nutshell, it is a process in which the background sound of a clip is reduced and the voiceover is amplified. Therefore, with the help of sound ducking, we can focus on the dialogues without a noisy background track.
Lately, a lot of people have asked us about the process to do automatic audio ducking in Final Cut Pro X. Since it is a clip-based editing tool, it lacks a dedicated mixer to help us do FCPX audio ducking. Thankfully, there are third-party plugins and tools (like the FCPX AutoDuck) that can help us do the same. In this post, I will let you know how to do audio ducking in Final Cut Pro and its best alternative.
If you don’t want to use any plugins, see this article: How to sync in FCPX.
Part 1: How to Perform Audio Ducking in Final Cut Pro X?
If you have a video in which you have background music and a voiceover, then you can perform sound ducking in it. This will automatically enhance the quality of the voiceover and would mellow down the background music selectively. Sadly, the feature of audio ducking in Final Cut Pro has to be done manually as there are no instant automatic options in the tool presently.
Therefore, you can use any reliable third-party FCPX tool like Audified or AutoDuck to meet your requirements. For instance, let’s consider the example of FCPX AutoDuck, which is a paid macOS application. To perform FCPX audio ducking, you first have to export the music and voiceover as two dedicated files. Later, you can import them to FCPX AutoDuck to perform auto-ducking of the music.
Step 1: Export the Music Files
To perform audio ducking in Final Cut Pro, you can first launch the application on Mac and open your project. Since there is no FCPX audio ducking option, you first have to export the music files.
For this, you can just go to the main menu on Final Cut Pro and select File > Share > Master File. This will help you explore and save all the media files from Final Cut Pro.
Now, once the Master File window would be opened, you can go to the “Role” tab and select “Audio Only” as the output role. This will display a list of the background music and the voiceover file.
You can now select the files of your choice and click on the “Next” button to save them to any desired location on your Mac.
Step 2: Use FCPX AutoDuck to Do Automatic Sound Ducking
Great! Now, you can just open the FCPX AutoDuck application on your Mac via its Application or Spotlight. You can just give it a project name and drag-and-drop the speaker (voiceover) and the music files here. If you want, you can also import a filler file of your choice.
FCPX will also let you select the level of music ducking from its dedication option. There are also different options to set up things like setting up the window or pre-roll for the audio.
In the end, you can click on the “Duck” button and let FCPX AutoDuck perform automatic audio ducking on the files.
Step 3: Insert the Modified File to your Project
Once the FCPX audio ducking process is completed, it will generate an XML file. You can now just drag the XML file and drop it to your project in Final Cut Pro. Here, you can choose to select the XML file in the same project.
You can now copy the modified music clip, go to the timeline, and paste it at the starting of the video. Here, you can just mute the previous music clip and let the auto-duck audio play instead.
Part 2: The Best FCPX Alternative for Mac to Perform Automatic Audio Ducking
As you can see, it is pretty tough to do audio ducking in Final Cut Pro as there is no automatic feature in the tool. Therefore, you can consider using Wondershare Filmora for Mac to perform automatic sound ducking and save your time. It is an inbuilt feature in Filmora that would perform auto-ducking instantly, and you can also mark the level of ducking in the video.
Ideally, you can perform audio ducking on voiceover or another soundtrack in Wondershare Filmora. To perform music ducking via Wondershare Filmora on Mac, you can follow these steps:
Step 1: Import the Video Clip or Record Your Audio
To begin with, just launch Wondershare Filmora on your Mac and just drag-and-drop your media files to the application. You can also go to its menu and choose to import media files.
Once your video is imported, you can drag it to the timeline at the bottom to work on it. If you want, you can click on the voiceover icon (adjacent to the preview section) to record dialogues right away.
Apart from that, you can also import music files to your video or use the extensive range of royalty-free audio files that are available in Filmora.
Step 2: Perform Automatic Audio Ducking
Great! Now, on the timeline of Filmora, you can see your video and the music track. From here, you need to select the track that you want to amplify (like the voiceover).
Afterward, right-click the audio track and select the “Adjust Audio” option from the context menu.
This will open a dedicated Audio Mixer window on the screen. Just go to the Audio tab and enable the “Ducking” option to lower the volume of other audio tracks. You can also select the desired level for music ducking to implement.
Step 3: Export the Edited Video
That’s it! After performing audio ducking on Filmora, you can preview the results and further make the needed changes. In the end, you can click on the “Export” button and save the file in the format and resolution of your choice.
There you go! After following this guide, you can easily learn how to do audio ducking in Final Cut Pro X easily. Since there is no inbuilt FCPX audio ducking option, you can use a third-party tool like FCPX AutoDuck. Apart from that, if you are looking for a better alternative to do sound ducking, then simply use Wondershare Filmora. It is a user-friendly and resourceful application that would let you perform automatic music ducking like a pro.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Benjamin Arango
Oct 26, 2023• Proven solutions
If you are working in post-production, then you might be familiar with the concept of audio ducking. In nutshell, it is a process in which the background sound of a clip is reduced and the voiceover is amplified. Therefore, with the help of sound ducking, we can focus on the dialogues without a noisy background track.
Lately, a lot of people have asked us about the process to do automatic audio ducking in Final Cut Pro X. Since it is a clip-based editing tool, it lacks a dedicated mixer to help us do FCPX audio ducking. Thankfully, there are third-party plugins and tools (like the FCPX AutoDuck) that can help us do the same. In this post, I will let you know how to do audio ducking in Final Cut Pro and its best alternative.
If you don’t want to use any plugins, see this article: How to sync in FCPX.
Part 1: How to Perform Audio Ducking in Final Cut Pro X?
If you have a video in which you have background music and a voiceover, then you can perform sound ducking in it. This will automatically enhance the quality of the voiceover and would mellow down the background music selectively. Sadly, the feature of audio ducking in Final Cut Pro has to be done manually as there are no instant automatic options in the tool presently.
Therefore, you can use any reliable third-party FCPX tool like Audified or AutoDuck to meet your requirements. For instance, let’s consider the example of FCPX AutoDuck, which is a paid macOS application. To perform FCPX audio ducking, you first have to export the music and voiceover as two dedicated files. Later, you can import them to FCPX AutoDuck to perform auto-ducking of the music.
Step 1: Export the Music Files
To perform audio ducking in Final Cut Pro, you can first launch the application on Mac and open your project. Since there is no FCPX audio ducking option, you first have to export the music files.
For this, you can just go to the main menu on Final Cut Pro and select File > Share > Master File. This will help you explore and save all the media files from Final Cut Pro.
Now, once the Master File window would be opened, you can go to the “Role” tab and select “Audio Only” as the output role. This will display a list of the background music and the voiceover file.
You can now select the files of your choice and click on the “Next” button to save them to any desired location on your Mac.
Step 2: Use FCPX AutoDuck to Do Automatic Sound Ducking
Great! Now, you can just open the FCPX AutoDuck application on your Mac via its Application or Spotlight. You can just give it a project name and drag-and-drop the speaker (voiceover) and the music files here. If you want, you can also import a filler file of your choice.
FCPX will also let you select the level of music ducking from its dedication option. There are also different options to set up things like setting up the window or pre-roll for the audio.
In the end, you can click on the “Duck” button and let FCPX AutoDuck perform automatic audio ducking on the files.
Step 3: Insert the Modified File to your Project
Once the FCPX audio ducking process is completed, it will generate an XML file. You can now just drag the XML file and drop it to your project in Final Cut Pro. Here, you can choose to select the XML file in the same project.
You can now copy the modified music clip, go to the timeline, and paste it at the starting of the video. Here, you can just mute the previous music clip and let the auto-duck audio play instead.
Part 2: The Best FCPX Alternative for Mac to Perform Automatic Audio Ducking
As you can see, it is pretty tough to do audio ducking in Final Cut Pro as there is no automatic feature in the tool. Therefore, you can consider using Wondershare Filmora for Mac to perform automatic sound ducking and save your time. It is an inbuilt feature in Filmora that would perform auto-ducking instantly, and you can also mark the level of ducking in the video.
Ideally, you can perform audio ducking on voiceover or another soundtrack in Wondershare Filmora. To perform music ducking via Wondershare Filmora on Mac, you can follow these steps:
Step 1: Import the Video Clip or Record Your Audio
To begin with, just launch Wondershare Filmora on your Mac and just drag-and-drop your media files to the application. You can also go to its menu and choose to import media files.
Once your video is imported, you can drag it to the timeline at the bottom to work on it. If you want, you can click on the voiceover icon (adjacent to the preview section) to record dialogues right away.
Apart from that, you can also import music files to your video or use the extensive range of royalty-free audio files that are available in Filmora.
Step 2: Perform Automatic Audio Ducking
Great! Now, on the timeline of Filmora, you can see your video and the music track. From here, you need to select the track that you want to amplify (like the voiceover).
Afterward, right-click the audio track and select the “Adjust Audio” option from the context menu.
This will open a dedicated Audio Mixer window on the screen. Just go to the Audio tab and enable the “Ducking” option to lower the volume of other audio tracks. You can also select the desired level for music ducking to implement.
Step 3: Export the Edited Video
That’s it! After performing audio ducking on Filmora, you can preview the results and further make the needed changes. In the end, you can click on the “Export” button and save the file in the format and resolution of your choice.
There you go! After following this guide, you can easily learn how to do audio ducking in Final Cut Pro X easily. Since there is no inbuilt FCPX audio ducking option, you can use a third-party tool like FCPX AutoDuck. Apart from that, if you are looking for a better alternative to do sound ducking, then simply use Wondershare Filmora. It is a user-friendly and resourceful application that would let you perform automatic music ducking like a pro.
Benjamin Arango
Benjamin Arango is a writer and a lover of all things video.
Follow @Benjamin Arango
Also read:
- New 2024 Approved Behind the Screens The Leading BGM Audio Selections
- Updated Streamlining Audio Success Leading Podcast Hosting Options for 2024
- New Top Mobile Playlists Discovering the Ultimate Melodies for Your Android Device
- New Unlock Your Creative Potential Best Free Software to Produce Music on PC & Mac, 2023 Edition
- New Innovative Approaches to Infusing Sound Into AVI Files Post-Update
- New 2024 Approved The Complete Guide to MP3 Customization From Editing Basics to Professional Touches
- Updated 2024 Approved The Essential Guide to Natural Ambiance Top 10 Sound Apps for iPhone and Android
- Updated 2024 Approved Ultimate Guide The 10 Leading Websites for Accessing HD Video Background Files
- 2024 Approved Finding Your Perfect Game Voice Conversion Companion
- Updated Adjusting Sound Levels in Audacity Raising the Volume Up, Lowering It Down for 2024
- New In 2024, Exploring the Best MacDAWs An Extensive Review of the Top 8 Software
- Updated Score Your Story Editing and Enriching Videos with Auditory Elements via Filmora for 2024
- Updated 2024 Approved Overcoming the Challenge of Acoustic Reflections in Sound Engineering
- New Discovering Dynamic Dry Brush Audio Layers for Productions for 2024
- New In 2024, The Comprehensive Selection Guide to No-Cost, High-Performance Voice Logging Tools
- New Melodic Minus One Magic A Gratuitous Converter Bringing Downbeats of MP3 Track to Harmony.
- In 2024, The Guide to Blending Music and Movement on Screen
- Updated Audiobook Authoring Made Accessible Your Ultimate Guide to Production in the Year 2023 for 2024
- In 2024, A Guide to the Premier 8 Sounds for YouTube Launches and Introduction Scenes
- New Most Trending Free Digital Repositories for Guitar Mood Melodies and Images for 2024
- Updated Audio-Visual Coalescence Techniques for Cohesive Media Creation for 2024
- Proven Choices Selecting the Top 6 Costless Cloud-Based Sound Editors for 2024
- New 2024 Approved Highest-Rated Audio-to-Text Conversion Software
- The Complete Guide to Podcast Editing with Audacity
- Updated Mastering Audio Clarity Techniques for Eliminating Distortion in Videos for 2024
- New Top 10 Trending Radio Audio Enhancements for 2024
- 2024 Approved Unveiling the Finest 8 Android-Based Digital Audio Workstations of This Year
- 2024 Approved The Invisible Touch Methods to Apply Fading Effects on Sound in iMovie
- Updated In 2024, A Soundtrack Journey Unveiling 10 Key Spots to Get Your Digital Music
- New In 2024, The Complete Users Manual to Expertly Navigate TwistedWaves Audio Workflow
- In 2024, Choosing Your Perfect Speech Logger An All-Encompassing Guide to No-Monetary Options
- New 2024 Approved Audio Blending Techniques Creating a Unified Soundtrack for Videos
- Leading Free Audio Volume Harmonizer Platforms
- Updated Reduced Clarity of Audio Outputs in the Latest Adobe Rush Release for 2024
- Conquering Computer Storage A Comprehensive Approach to Obtaining Podcasts for 2024
- Haunting Harmonics Procuring Disturbing Sound Effects for Creatives
- Reveal the Vocalization of a Wolveshow for 2024
- Updated 2024 Approved Straightforward Speech Modification Software Overview, Principles, & Comparable Alternatives
- 2024 Approved Searching for Realistic Church Bells Acoustics
- 2024 Approved From Wireless Broadcasts to Digital Downloads Top 3 Ways to Convert Podcasts Into MP3s
- New 2024 Approved Top 10 iPhone Voice Capture Apps The Ultimate List
- Updated In 2024, How to Adjust Audio Volume in Audacity?
- Updated Voice Resonance Revolution The Pathway to a Deeper Soundscape in Filmora for 2024
- In 2024, Mastering Siris Tone A Guide to Altering Siris Vocal Style
- Updated REAPER Essentials & Extras A Complete Rundown with Expert Commentary for 2024
- New In 2024, Advanced Audacity Editing Adjusting Pitch Without Audio Degradation
- Updated Essential Online Hubs for Natural Environment Recordings
- In 2024, 6 Best Automatic Transcription Software
- How to Fix Android.Process.Media Has Stopped on Poco M6 5G | Dr.fone
- In 2024, How to get the dragon scale and evolution-enabled pokemon On Vivo Y100 5G? | Dr.fone
- Create Slide Masking Effect Intro for 2024
- How Do I SIM Unlock My iPhone SE (2022)?
- Where Is the Best Place to Catch Dratini On HTC U23 Pro | Dr.fone
- In 2024, How To Unlock Stolen iPhone SE In Different Conditionsin | Dr.fone
- Updated 2024 Approved Home Video Pro on Mac Simplified Slideshow Creation for Everyone
- New 2024 Approved Online Video Compression Made Easy 10 Free Tools to Try
- New 2024 Approved Edit Like a Pro Top 10 Free and Paid Android Video Editors You Need
- How to Repair Broken video files of Vivo Y27 4G on Windows??
- In 2024, Easily Unlock Your Vivo X Flip Device SIM
- Updated In 2024, Top TikTok Watermark Removal Tools to Boost Your Videos
- New Design Your Own Fake Face with These Free Online Tools for 2024
- In 2024, How to Display Apple iPhone 14 Screen on PC Easily? | Dr.fone
- Want to Uninstall Google Play Service from Samsung Galaxy M34? Here is How | Dr.fone
- Google Play Services Wont Update? 12 Fixes are Here on Vivo T2 Pro 5G | Dr.fone
- Realme V30 Not Receiving Texts? 10 Hassle-Free Solutions Here | Dr.fone
- In 2024, How Do You Get Sun Stone Evolutions in Pokémon For OnePlus 11R? | Dr.fone
- Use Device Manager to update hardware drivers on Windows 11 & 10 & 7
- 10 Fake GPS Location Apps on Android Of your Samsung Galaxy M34 5G | Dr.fone
- How to Factory Reset Honor 70 Lite 5G If I Forgot Security Code or Password? | Dr.fone
- In 2024, Ultimate Guide to Catch the Regional-Located Pokemon For OnePlus 12 | Dr.fone
- Title: New The Pros Method for Smooth On-Off Sound Dynamics Using Adobe After Effects for 2024
- Author: Jacob
- Created at : 2024-05-05 04:09:33
- Updated at : 2024-05-06 04:09:33
- Link: https://audio-shaping.techidaily.com/new-the-pros-method-for-smooth-on-off-sound-dynamics-using-adobe-after-effects-for-2024/
- License: This work is licensed under CC BY-NC-SA 4.0.