Revitalize Audio Diminishments in Video Presentation

How to Increase Volume of the Media Files

Liza Brown

Mar 27, 2024• Proven solutions

Have you ever come with this situation: even with the volume in the highest level, your recorded media file sill sound very slight? Or you may want to increase volume in video or audio so as to enjoy it even in noise environment. As a matter of fact, it can be every easy as long as you use a powerful video editing tool- such as Wondershare Filmora . With it, you can increase volume of media files in various formats no matter it is in MP4, MP3, MKV, MOV, WAV etc . In this article, we will show you how to increase video volume with Filmora video editor. Now follow the steps below to see how to achieve it.

To begin with, click the Free Download button below to get a free trial copy of Wondershare Filmora on your Windows or Mac computer.

Learn more details about How to Adjust Audio Volume in Videos [4 Ways]

1. Add files that are in low volume

Free download Wondershare Filmora or Filmora for Mac (Originally Wondershare Filmora Video Editor), install and run it. Then click New Project to enter the main screen to import and add files that are in low volume to Filmora. You can also directly drag-n-drop the target media files to the primary window. Wondershare Filmora supports almost all video & audio formats supported, including WMV, MOV, AVI, MKV, MP4, MPG, MPEG, MOD, DV, MTS, avchd, M2TS, TS, MP3, MKA, and more. So there will be no obstacle to increase MP4/MP3/MKV/MOV/WAV/AVI video volume at all.

You may also like: How to Normalize Video Audio

2. Increase audio volume and prelisten

Drag-n-drop the Video file to the video track and then double click the clip in the timeline to enter the editing panel. Switch to Audio tab to adjust the audio settings such as volume, fade in and fade out, pitch, audio equalizer and remove audio noise. To increase the video volume, move the Volume slide bar up to increase the volume. Filmora also allows you to crease the left channel volume or right channel volume as well. If you want to listen to the real-time audio effect, just click the play icon.

Besides that, Filmora also allows you mute the audio and change the audio speed. To remove the audio background, you can use the Denoise feature. You can also set Fade in/fade out to increase the audio volume louder or lower at the begining or at the end, fine tune the pitch, etc. in the Audio tab or switch to “Video” column to rotate, adjust contrast, saturation, brightness, nue and speed of the video.

In case that you want to add your own voice over to video which has audio sounds already, you can drag your voiceover file to the audio track and then click it to enter the audio editing panel. To make your voice louder, you can increase the volume of it and lower down the video audio a little bit.

You can adjust the height of tracks based on your needs by clicking Adjust Track Height; it is recommended to set the track height to Big to edit audio more visible.

3. Set output video/audio formats

If you’re satisfied, click “Export” to save the changed media files. Here’re several options for you:

• Save to fit the devices such as iPhone, iPad, Apple TV, Samsung Galaxy, Google Pixel, Xbox 360, PSP.
• Save as various formats such as WMV, MOV, AVI, MKV, MP4 and more.
• Directly upload to YouTube/Vimeo or burn to DVD.

You see, it’s just so easy to increase volume in the media files with the above detailed guide. Besides increase volume, Wondershare Filmora can even split video , merge videos into one , rotate video , trim and crop video , add image to video and more. Just get this ideal video editing tool and enrich your video world.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Quick Tip 1: How to increase video volume in Windows Movie Maker for free?

In case that you are using Windows Movie Maker, you can adjust the video volume for free. After adding videos, click the video that you want to change the volume of and then go to Edit tab. You will see the Video Volume in the left side, click it and then drag the slide bar to right to increase the volume of the video.

Quick Tip 2: How to increase volume with iMovie for free?

There are several ways to adjust video volume in iMovie, here I will share with you the easiest way to do that: after importing media files to the timeline, click the audio or the video clip which has audio, and then drag the horizontal line across the audio waveform up to increase the volume.

Add Voiceover to Video [Video Tutorial]

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Have you ever come with this situation: even with the volume in the highest level, your recorded media file sill sound very slight? Or you may want to increase volume in video or audio so as to enjoy it even in noise environment. As a matter of fact, it can be every easy as long as you use a powerful video editing tool- such as Wondershare Filmora . With it, you can increase volume of media files in various formats no matter it is in MP4, MP3, MKV, MOV, WAV etc . In this article, we will show you how to increase video volume with Filmora video editor. Now follow the steps below to see how to achieve it.

To begin with, click the Free Download button below to get a free trial copy of Wondershare Filmora on your Windows or Mac computer.

Learn more details about How to Adjust Audio Volume in Videos [4 Ways]

1. Add files that are in low volume

Free download Wondershare Filmora or Filmora for Mac (Originally Wondershare Filmora Video Editor), install and run it. Then click New Project to enter the main screen to import and add files that are in low volume to Filmora. You can also directly drag-n-drop the target media files to the primary window. Wondershare Filmora supports almost all video & audio formats supported, including WMV, MOV, AVI, MKV, MP4, MPG, MPEG, MOD, DV, MTS, avchd, M2TS, TS, MP3, MKA, and more. So there will be no obstacle to increase MP4/MP3/MKV/MOV/WAV/AVI video volume at all.

You may also like: How to Normalize Video Audio

2. Increase audio volume and prelisten

Drag-n-drop the Video file to the video track and then double click the clip in the timeline to enter the editing panel. Switch to Audio tab to adjust the audio settings such as volume, fade in and fade out, pitch, audio equalizer and remove audio noise. To increase the video volume, move the Volume slide bar up to increase the volume. Filmora also allows you to crease the left channel volume or right channel volume as well. If you want to listen to the real-time audio effect, just click the play icon.

Besides that, Filmora also allows you mute the audio and change the audio speed. To remove the audio background, you can use the Denoise feature. You can also set Fade in/fade out to increase the audio volume louder or lower at the begining or at the end, fine tune the pitch, etc. in the Audio tab or switch to “Video” column to rotate, adjust contrast, saturation, brightness, nue and speed of the video.

In case that you want to add your own voice over to video which has audio sounds already, you can drag your voiceover file to the audio track and then click it to enter the audio editing panel. To make your voice louder, you can increase the volume of it and lower down the video audio a little bit.

You can adjust the height of tracks based on your needs by clicking Adjust Track Height; it is recommended to set the track height to Big to edit audio more visible.

3. Set output video/audio formats

If you’re satisfied, click “Export” to save the changed media files. Here’re several options for you:

• Save to fit the devices such as iPhone, iPad, Apple TV, Samsung Galaxy, Google Pixel, Xbox 360, PSP.
• Save as various formats such as WMV, MOV, AVI, MKV, MP4 and more.
• Directly upload to YouTube/Vimeo or burn to DVD.

You see, it’s just so easy to increase volume in the media files with the above detailed guide. Besides increase volume, Wondershare Filmora can even split video , merge videos into one , rotate video , trim and crop video , add image to video and more. Just get this ideal video editing tool and enrich your video world.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Quick Tip 1: How to increase video volume in Windows Movie Maker for free?

In case that you are using Windows Movie Maker, you can adjust the video volume for free. After adding videos, click the video that you want to change the volume of and then go to Edit tab. You will see the Video Volume in the left side, click it and then drag the slide bar to right to increase the volume of the video.

Quick Tip 2: How to increase volume with iMovie for free?

There are several ways to adjust video volume in iMovie, here I will share with you the easiest way to do that: after importing media files to the timeline, click the audio or the video clip which has audio, and then drag the horizontal line across the audio waveform up to increase the volume.

Add Voiceover to Video [Video Tutorial]

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Have you ever come with this situation: even with the volume in the highest level, your recorded media file sill sound very slight? Or you may want to increase volume in video or audio so as to enjoy it even in noise environment. As a matter of fact, it can be every easy as long as you use a powerful video editing tool- such as Wondershare Filmora . With it, you can increase volume of media files in various formats no matter it is in MP4, MP3, MKV, MOV, WAV etc . In this article, we will show you how to increase video volume with Filmora video editor. Now follow the steps below to see how to achieve it.

To begin with, click the Free Download button below to get a free trial copy of Wondershare Filmora on your Windows or Mac computer.

Learn more details about How to Adjust Audio Volume in Videos [4 Ways]

1. Add files that are in low volume

Free download Wondershare Filmora or Filmora for Mac (Originally Wondershare Filmora Video Editor), install and run it. Then click New Project to enter the main screen to import and add files that are in low volume to Filmora. You can also directly drag-n-drop the target media files to the primary window. Wondershare Filmora supports almost all video & audio formats supported, including WMV, MOV, AVI, MKV, MP4, MPG, MPEG, MOD, DV, MTS, avchd, M2TS, TS, MP3, MKA, and more. So there will be no obstacle to increase MP4/MP3/MKV/MOV/WAV/AVI video volume at all.

You may also like: How to Normalize Video Audio

2. Increase audio volume and prelisten

Drag-n-drop the Video file to the video track and then double click the clip in the timeline to enter the editing panel. Switch to Audio tab to adjust the audio settings such as volume, fade in and fade out, pitch, audio equalizer and remove audio noise. To increase the video volume, move the Volume slide bar up to increase the volume. Filmora also allows you to crease the left channel volume or right channel volume as well. If you want to listen to the real-time audio effect, just click the play icon.

Besides that, Filmora also allows you mute the audio and change the audio speed. To remove the audio background, you can use the Denoise feature. You can also set Fade in/fade out to increase the audio volume louder or lower at the begining or at the end, fine tune the pitch, etc. in the Audio tab or switch to “Video” column to rotate, adjust contrast, saturation, brightness, nue and speed of the video.

In case that you want to add your own voice over to video which has audio sounds already, you can drag your voiceover file to the audio track and then click it to enter the audio editing panel. To make your voice louder, you can increase the volume of it and lower down the video audio a little bit.

You can adjust the height of tracks based on your needs by clicking Adjust Track Height; it is recommended to set the track height to Big to edit audio more visible.

3. Set output video/audio formats

If you’re satisfied, click “Export” to save the changed media files. Here’re several options for you:

• Save to fit the devices such as iPhone, iPad, Apple TV, Samsung Galaxy, Google Pixel, Xbox 360, PSP.
• Save as various formats such as WMV, MOV, AVI, MKV, MP4 and more.
• Directly upload to YouTube/Vimeo or burn to DVD.

You see, it’s just so easy to increase volume in the media files with the above detailed guide. Besides increase volume, Wondershare Filmora can even split video , merge videos into one , rotate video , trim and crop video , add image to video and more. Just get this ideal video editing tool and enrich your video world.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Quick Tip 1: How to increase video volume in Windows Movie Maker for free?

In case that you are using Windows Movie Maker, you can adjust the video volume for free. After adding videos, click the video that you want to change the volume of and then go to Edit tab. You will see the Video Volume in the left side, click it and then drag the slide bar to right to increase the volume of the video.

Quick Tip 2: How to increase volume with iMovie for free?

There are several ways to adjust video volume in iMovie, here I will share with you the easiest way to do that: after importing media files to the timeline, click the audio or the video clip which has audio, and then drag the horizontal line across the audio waveform up to increase the volume.

Add Voiceover to Video [Video Tutorial]

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Mar 27, 2024• Proven solutions

Have you ever come with this situation: even with the volume in the highest level, your recorded media file sill sound very slight? Or you may want to increase volume in video or audio so as to enjoy it even in noise environment. As a matter of fact, it can be every easy as long as you use a powerful video editing tool- such as Wondershare Filmora . With it, you can increase volume of media files in various formats no matter it is in MP4, MP3, MKV, MOV, WAV etc . In this article, we will show you how to increase video volume with Filmora video editor. Now follow the steps below to see how to achieve it.

To begin with, click the Free Download button below to get a free trial copy of Wondershare Filmora on your Windows or Mac computer.

Learn more details about How to Adjust Audio Volume in Videos [4 Ways]

1. Add files that are in low volume

Free download Wondershare Filmora or Filmora for Mac (Originally Wondershare Filmora Video Editor), install and run it. Then click New Project to enter the main screen to import and add files that are in low volume to Filmora. You can also directly drag-n-drop the target media files to the primary window. Wondershare Filmora supports almost all video & audio formats supported, including WMV, MOV, AVI, MKV, MP4, MPG, MPEG, MOD, DV, MTS, avchd, M2TS, TS, MP3, MKA, and more. So there will be no obstacle to increase MP4/MP3/MKV/MOV/WAV/AVI video volume at all.

You may also like: How to Normalize Video Audio

2. Increase audio volume and prelisten

Drag-n-drop the Video file to the video track and then double click the clip in the timeline to enter the editing panel. Switch to Audio tab to adjust the audio settings such as volume, fade in and fade out, pitch, audio equalizer and remove audio noise. To increase the video volume, move the Volume slide bar up to increase the volume. Filmora also allows you to crease the left channel volume or right channel volume as well. If you want to listen to the real-time audio effect, just click the play icon.

Besides that, Filmora also allows you mute the audio and change the audio speed. To remove the audio background, you can use the Denoise feature. You can also set Fade in/fade out to increase the audio volume louder or lower at the begining or at the end, fine tune the pitch, etc. in the Audio tab or switch to “Video” column to rotate, adjust contrast, saturation, brightness, nue and speed of the video.

In case that you want to add your own voice over to video which has audio sounds already, you can drag your voiceover file to the audio track and then click it to enter the audio editing panel. To make your voice louder, you can increase the volume of it and lower down the video audio a little bit.

You can adjust the height of tracks based on your needs by clicking Adjust Track Height; it is recommended to set the track height to Big to edit audio more visible.

3. Set output video/audio formats

If you’re satisfied, click “Export” to save the changed media files. Here’re several options for you:

• Save to fit the devices such as iPhone, iPad, Apple TV, Samsung Galaxy, Google Pixel, Xbox 360, PSP.
• Save as various formats such as WMV, MOV, AVI, MKV, MP4 and more.
• Directly upload to YouTube/Vimeo or burn to DVD.

You see, it’s just so easy to increase volume in the media files with the above detailed guide. Besides increase volume, Wondershare Filmora can even split video , merge videos into one , rotate video , trim and crop video , add image to video and more. Just get this ideal video editing tool and enrich your video world.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Quick Tip 1: How to increase video volume in Windows Movie Maker for free?

In case that you are using Windows Movie Maker, you can adjust the video volume for free. After adding videos, click the video that you want to change the volume of and then go to Edit tab. You will see the Video Volume in the left side, click it and then drag the slide bar to right to increase the volume of the video.

Quick Tip 2: How to increase volume with iMovie for free?

There are several ways to adjust video volume in iMovie, here I will share with you the easiest way to do that: after importing media files to the timeline, click the audio or the video clip which has audio, and then drag the horizontal line across the audio waveform up to increase the volume.

Add Voiceover to Video [Video Tutorial]

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Preserving Sound Integrity: Altering Audio Tones in Audacity

You may raise or lower the pitch of a pre-recorded song. Likewise, you may apply the pitch-changing effect in real-time sound recording. Change in pitch affects your noise in certain ways. For instance, it can help you sound younger. Similarly, it can convert the male voice into a female voice. Another notable use of the pitch-changing technique is that you can produce sounds like cartoons. So, changing pitch can add a unique touch to your voice. You can also change pitch when recording in Audacity. The following article covers details about the Audacity change pitch feature. Let’s get started.

In this article

01 What is pitch, and how does it work?

02 How to Change Pitch in Audacity?

Part 1: What is pitch, and how does it work?

Not all sounds are the same. Some vary in terms of amplitude, which makes them loud or quiet. In contrast, others vary in terms of pitch, which makes them high or low. Pitch is used to differentiate between the acute and flat notes in a sound wave. High-pitched sounds are likely to be shrilling, whereas the lower-pitched will be bassy. Pitch depends upon the frequency of the sound waves producing them. In short, notes at a higher frequency are high-pitched.

On the contrary, notes at lower frequencies are low-pitched. Changing a pitch of noise from low to high or vice versa is an art. Thus, sound recording and editing applications like Audacity come with the in-built effect that enables you to change the pitch of a sound.

Part 2: How to Change Pitch in Audacity?

Sound editing is becoming increasingly popular in music and other relevant industries. Several applications offer sound editing tools to serve the needs of the people. Pitch-changing is one of the common tools that people look for in sound editors.

Audacity is one of the notable software that allows users to change the pitch of the voice. It comes with an Audacity pitch shift mechanism to facilitate users. So, if you are editing sound in Audacity, changing the pitch is just a matter of a few clicks. Are you still wondering how you can apply the Audacity change pitch technique when editing? Here’s how you can do it in simple steps.

Step 1: Select the audio portion

Launch Audacity and add sound recordings you want to edit. Click on the timeline and drag to select the portion of the sound.

Note: Only the portion whose pitch you want to change.

Step 2: Open Effect menu

Click on the Effect tab at the top right of the screen next to Generate. Select Pitch Change from the drop-down menu.

Note: You can also make other changes, such as Change Speed and Change Tempo option will let you alter the speed of the sound. So, the pitch can also be altered using this process.

Step 3: Adjust pitch

Drag the slider to alter the pitch of the sound and press the OK button to apply changes.

Note: To increase pitch, slide towards the right. Similarly, slide towards the left to a lower pitch. In addition, the pitch can also be changed by configuring From and To parameters.

Bonus Section: How to Adjust Sound Louder in Audacity?

Volume in an audio file may or may not be ideal for use. Sometimes, the sound is too loud or low. Audacity can help you in such a situation. So, if you are editing sound recordings in Audacity, you can also fix the volume of the sound. The good thing to note is that you can adjust the sound in both directions, which implies you can easily amplify or reduce the volume in these open-source applications. Are you interested in knowing about the volume adjustment process in Audacity? If yes, we have summarized the process in simple steps. Let’s take a look.

Step 1: Add an audio file

Launch the software and click on File. Select Open and select the desired audio.

Note: It is not recommended to change the volume through the playback volume knob at the top right corner of the screen, as this will only increase the volume in your device. However, the actual volume of the audio will remain unchanged.

Step 2: Increase/Decrease audio gain

Change the gain of the audio at the left-hand side of the screen. Move the slider to adjust the volume to the desired level.

Note: Alternatively, you may also increase or increase the volume through the amplification process. To use this method, select the audio portion, access Effect, and tap Amplify. Tick allow clipping box and move the slider to set the volume of the sound.

Conclusion

There are high chances of audio sound not being in the required pitch or volume. Plus, you may also need to change the sound characteristics of an audio file for specific use. So, if this is the case, the Audacity change pitch technique is all you need to learn. Thus, we have summarized the process of changing pitch and volume in a step-by-step guide in this article. Hopefully, all your concerns will have been addressed.

02 How to Change Pitch in Audacity?

Part 1: What is pitch, and how does it work?

Not all sounds are the same. Some vary in terms of amplitude, which makes them loud or quiet. In contrast, others vary in terms of pitch, which makes them high or low. Pitch is used to differentiate between the acute and flat notes in a sound wave. High-pitched sounds are likely to be shrilling, whereas the lower-pitched will be bassy. Pitch depends upon the frequency of the sound waves producing them. In short, notes at a higher frequency are high-pitched.

On the contrary, notes at lower frequencies are low-pitched. Changing a pitch of noise from low to high or vice versa is an art. Thus, sound recording and editing applications like Audacity come with the in-built effect that enables you to change the pitch of a sound.

Part 2: How to Change Pitch in Audacity?

Sound editing is becoming increasingly popular in music and other relevant industries. Several applications offer sound editing tools to serve the needs of the people. Pitch-changing is one of the common tools that people look for in sound editors.

Audacity is one of the notable software that allows users to change the pitch of the voice. It comes with an Audacity pitch shift mechanism to facilitate users. So, if you are editing sound in Audacity, changing the pitch is just a matter of a few clicks. Are you still wondering how you can apply the Audacity change pitch technique when editing? Here’s how you can do it in simple steps.

Step 1: Select the audio portion

Launch Audacity and add sound recordings you want to edit. Click on the timeline and drag to select the portion of the sound.

Note: Only the portion whose pitch you want to change.

Step 2: Open Effect menu

Click on the Effect tab at the top right of the screen next to Generate. Select Pitch Change from the drop-down menu.

Note: You can also make other changes, such as Change Speed and Change Tempo option will let you alter the speed of the sound. So, the pitch can also be altered using this process.

Step 3: Adjust pitch

Drag the slider to alter the pitch of the sound and press the OK button to apply changes.

Note: To increase pitch, slide towards the right. Similarly, slide towards the left to a lower pitch. In addition, the pitch can also be changed by configuring From and To parameters.

Bonus Section: How to Adjust Sound Louder in Audacity?

Volume in an audio file may or may not be ideal for use. Sometimes, the sound is too loud or low. Audacity can help you in such a situation. So, if you are editing sound recordings in Audacity, you can also fix the volume of the sound. The good thing to note is that you can adjust the sound in both directions, which implies you can easily amplify or reduce the volume in these open-source applications. Are you interested in knowing about the volume adjustment process in Audacity? If yes, we have summarized the process in simple steps. Let’s take a look.

Step 1: Add an audio file

Launch the software and click on File. Select Open and select the desired audio.

Note: It is not recommended to change the volume through the playback volume knob at the top right corner of the screen, as this will only increase the volume in your device. However, the actual volume of the audio will remain unchanged.

Step 2: Increase/Decrease audio gain

Change the gain of the audio at the left-hand side of the screen. Move the slider to adjust the volume to the desired level.

Note: Alternatively, you may also increase or increase the volume through the amplification process. To use this method, select the audio portion, access Effect, and tap Amplify. Tick allow clipping box and move the slider to set the volume of the sound.

Conclusion

There are high chances of audio sound not being in the required pitch or volume. Plus, you may also need to change the sound characteristics of an audio file for specific use. So, if this is the case, the Audacity change pitch technique is all you need to learn. Thus, we have summarized the process of changing pitch and volume in a step-by-step guide in this article. Hopefully, all your concerns will have been addressed.

02 How to Change Pitch in Audacity?

Part 1: What is pitch, and how does it work?

Not all sounds are the same. Some vary in terms of amplitude, which makes them loud or quiet. In contrast, others vary in terms of pitch, which makes them high or low. Pitch is used to differentiate between the acute and flat notes in a sound wave. High-pitched sounds are likely to be shrilling, whereas the lower-pitched will be bassy. Pitch depends upon the frequency of the sound waves producing them. In short, notes at a higher frequency are high-pitched.

On the contrary, notes at lower frequencies are low-pitched. Changing a pitch of noise from low to high or vice versa is an art. Thus, sound recording and editing applications like Audacity come with the in-built effect that enables you to change the pitch of a sound.

Part 2: How to Change Pitch in Audacity?

Sound editing is becoming increasingly popular in music and other relevant industries. Several applications offer sound editing tools to serve the needs of the people. Pitch-changing is one of the common tools that people look for in sound editors.

Audacity is one of the notable software that allows users to change the pitch of the voice. It comes with an Audacity pitch shift mechanism to facilitate users. So, if you are editing sound in Audacity, changing the pitch is just a matter of a few clicks. Are you still wondering how you can apply the Audacity change pitch technique when editing? Here’s how you can do it in simple steps.

Step 1: Select the audio portion

Launch Audacity and add sound recordings you want to edit. Click on the timeline and drag to select the portion of the sound.

Note: Only the portion whose pitch you want to change.

Step 2: Open Effect menu

Click on the Effect tab at the top right of the screen next to Generate. Select Pitch Change from the drop-down menu.

Note: You can also make other changes, such as Change Speed and Change Tempo option will let you alter the speed of the sound. So, the pitch can also be altered using this process.

Step 3: Adjust pitch

Drag the slider to alter the pitch of the sound and press the OK button to apply changes.

Note: To increase pitch, slide towards the right. Similarly, slide towards the left to a lower pitch. In addition, the pitch can also be changed by configuring From and To parameters.

Bonus Section: How to Adjust Sound Louder in Audacity?

Volume in an audio file may or may not be ideal for use. Sometimes, the sound is too loud or low. Audacity can help you in such a situation. So, if you are editing sound recordings in Audacity, you can also fix the volume of the sound. The good thing to note is that you can adjust the sound in both directions, which implies you can easily amplify or reduce the volume in these open-source applications. Are you interested in knowing about the volume adjustment process in Audacity? If yes, we have summarized the process in simple steps. Let’s take a look.

Step 1: Add an audio file

Launch the software and click on File. Select Open and select the desired audio.

Note: It is not recommended to change the volume through the playback volume knob at the top right corner of the screen, as this will only increase the volume in your device. However, the actual volume of the audio will remain unchanged.

Step 2: Increase/Decrease audio gain

Change the gain of the audio at the left-hand side of the screen. Move the slider to adjust the volume to the desired level.

Note: Alternatively, you may also increase or increase the volume through the amplification process. To use this method, select the audio portion, access Effect, and tap Amplify. Tick allow clipping box and move the slider to set the volume of the sound.

Conclusion

There are high chances of audio sound not being in the required pitch or volume. Plus, you may also need to change the sound characteristics of an audio file for specific use. So, if this is the case, the Audacity change pitch technique is all you need to learn. Thus, we have summarized the process of changing pitch and volume in a step-by-step guide in this article. Hopefully, all your concerns will have been addressed.

02 How to Change Pitch in Audacity?

Part 1: What is pitch, and how does it work?

Not all sounds are the same. Some vary in terms of amplitude, which makes them loud or quiet. In contrast, others vary in terms of pitch, which makes them high or low. Pitch is used to differentiate between the acute and flat notes in a sound wave. High-pitched sounds are likely to be shrilling, whereas the lower-pitched will be bassy. Pitch depends upon the frequency of the sound waves producing them. In short, notes at a higher frequency are high-pitched.

On the contrary, notes at lower frequencies are low-pitched. Changing a pitch of noise from low to high or vice versa is an art. Thus, sound recording and editing applications like Audacity come with the in-built effect that enables you to change the pitch of a sound.

Part 2: How to Change Pitch in Audacity?

Sound editing is becoming increasingly popular in music and other relevant industries. Several applications offer sound editing tools to serve the needs of the people. Pitch-changing is one of the common tools that people look for in sound editors.

Audacity is one of the notable software that allows users to change the pitch of the voice. It comes with an Audacity pitch shift mechanism to facilitate users. So, if you are editing sound in Audacity, changing the pitch is just a matter of a few clicks. Are you still wondering how you can apply the Audacity change pitch technique when editing? Here’s how you can do it in simple steps.

Step 1: Select the audio portion

Launch Audacity and add sound recordings you want to edit. Click on the timeline and drag to select the portion of the sound.

Note: Only the portion whose pitch you want to change.

Step 2: Open Effect menu

Click on the Effect tab at the top right of the screen next to Generate. Select Pitch Change from the drop-down menu.

Note: You can also make other changes, such as Change Speed and Change Tempo option will let you alter the speed of the sound. So, the pitch can also be altered using this process.

Step 3: Adjust pitch

Drag the slider to alter the pitch of the sound and press the OK button to apply changes.

Note: To increase pitch, slide towards the right. Similarly, slide towards the left to a lower pitch. In addition, the pitch can also be changed by configuring From and To parameters.

Bonus Section: How to Adjust Sound Louder in Audacity?

Volume in an audio file may or may not be ideal for use. Sometimes, the sound is too loud or low. Audacity can help you in such a situation. So, if you are editing sound recordings in Audacity, you can also fix the volume of the sound. The good thing to note is that you can adjust the sound in both directions, which implies you can easily amplify or reduce the volume in these open-source applications. Are you interested in knowing about the volume adjustment process in Audacity? If yes, we have summarized the process in simple steps. Let’s take a look.

Step 1: Add an audio file

Launch the software and click on File. Select Open and select the desired audio.

Note: It is not recommended to change the volume through the playback volume knob at the top right corner of the screen, as this will only increase the volume in your device. However, the actual volume of the audio will remain unchanged.

Step 2: Increase/Decrease audio gain

Change the gain of the audio at the left-hand side of the screen. Move the slider to adjust the volume to the desired level.

Note: Alternatively, you may also increase or increase the volume through the amplification process. To use this method, select the audio portion, access Effect, and tap Amplify. Tick allow clipping box and move the slider to set the volume of the sound.

Conclusion

There are high chances of audio sound not being in the required pitch or volume. Plus, you may also need to change the sound characteristics of an audio file for specific use. So, if this is the case, the Audacity change pitch technique is all you need to learn. Thus, we have summarized the process of changing pitch and volume in a step-by-step guide in this article. Hopefully, all your concerns will have been addressed.

The Ultimate Guide to Music-Driven Editing: Perfect Pacing with Beat Alignment in Final Cut Pro X

How to Edit the Beat and Sync Videos to Music in Final Cut Pro X

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Also read: