The Ultimate Guide to Equalizing Auditory Output in VLC Software

How To Normalize Volume in VLC

How to normalize volume, why should we do it, and what is it after all? – these are the questions when it comes to editing our audio files, as well as the video clips we tend to change the sound of. So, first of all, the volume normalization is pretty much explained as follows: The process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. If it is a little bit difficult to understand, we have to highlight that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

But, why bother at all and why not leave it the way it is? Well, the answer to this is almost the same as on why editing exists in general, right? Things are not perfect! This is the fact that prompts us to make our video clips and audio better, improve it at least on the level which can get us the right amount of viewers and listeners. Everyone have had some pain listening to several podcasts, when the volume was too high or too low, or there were so much background noise that the whole recording was hurting the ears of a person! People will not convert to being loyal subscribers, viewers and listeners if their user experience is not favored. So, it is in our best interest to serve their best interest, with a little bit of editing.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

In the first case, you might have somewhat quite voice recording, and would like to make it better without changing its dynamic range, while making it as loud as possible. And when it comes to matching volumes, it is logical that you need to manipulate your editing this way in case you have a group of audio files, each or some of them are at different volumes, so, understandably, if not necessarily, you would like to make them come closer to the same volume.

So, until we give you the step-by step guide on how to normalize your volume in VLC player, we also need to inform you about audio normalization types. Here, generally, we come across three of them: a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. Last but not least, RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

Using any of this, making it better to listen to your voice, without people being annoyed and their ears becoming exhausting with what you have to offer, you will be making it enjoyable for them and easy to come back to your content, as they will not be obliged to change the volume on their own audio players. Instead, their experience with you will be calm and effortless, which you are aiming to achieve.

So, not, what about VLC? – this is a very popular media player, favorite for a lot of people all around the world, so you should already be quite familiar with what it is, at least by having streamed videos and movies there. Speaking more of what it represents, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and additionally, the program can stream from popular websites such as Disney+, Hulu, Netflix, and so on.

As if it was not enough, you can do simple video and audio editing in VLC Media Player, which a lot of people are unaware of! For example, you can easily trim and cut videos. So, as it happens, we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. Sooo… How to do that? Because, actually, it is so simple that you might be surprised you didn’t know about this earlier. To learn how to normalize volume in VLC, follow this simple guideline:

First, of course, as every time working with any software, you need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, you will need to check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, you can Save.

This is not something perfect, because it’s so simple to do and actually what it does is just help adjust the general volume, so it leaves the specifics alone.

But, it might be the case that you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC. So, you can do more with the Audio Effects menu there. And the steps are as follows:

First, on your VLC player, find Tools and then, in the menu, go to Preferences. The window will open, and there you need to select All in Show settings – actually it is a little bit hard to find because this is in the bottom left corner of the window. From there, you will need to navigate to Audio, and then, a little below, click on Filters and highlight it. The checkbox next to the Dynamic range compressor will probably be unchecked – so, check in it.

Next, see where Compressor is in the left panel? Select it. And now, you are free to make the changes to the levels as you see fit.

Here, if you are a little bit overwhelmed with the wide range of options to work on, you can just concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Don’t underestimate Attack time and release time, either. They graduate the changes to ramp them up at first, then down again, rather than initiating them immediately. So, if you set them to your liking as well, this will ensure that you have a more fluid transition in and out of the scene and there are less sudden, sometimes scary volume changes.

Therefore, you are now equipped with the most information you will need to normalize volume in VLC Player – so free to give it a go, play around with the different settings and carry out the best result imaginable for you!

How to normalize audio in Wondershare Filmora?

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor , but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

From Original Notes to New Narratives: Step-by-Step Guide for Audio Replacement in Videos

Video editing is inclusive of editing the audio track. You may be working on background scores, original soundtracks, and different kinds of sound effects. These tasks would need you to edit or replace audio in the video. You may have to mix other audio tracks to have one score. From sound engineering to finely editing every track being mixed, it is an ever expanding and exciting technical niche that will depend largely on a plethora of tools, so in this article, we will let you how to replace audio in video with 2 methods by using Filmora and Windows Movie Maker.

In this article

01 How to replace audio in video with Filmora

02 How to change audio in video with Windows Movie Maker

Part 1: How to replace audio in video with Filmora

The first method, let us explore how you can replace audio in video with Wondershare Filmora.

To begin with, get a free trial copy of Wondershare Filmora .

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1. Import file

Open the application and click ‘ Import once you have downloaded and installed Wondershare Filmora. Please search for the relevant video you wish to edit and load it from the hard disk or the specific folder. You can select multiple videos using ‘ctrl’ and clicking on the chosen files.

Step 2. Drag and drop to the video Timeline

The videos selected will be displayed as thumbnails. Choose a video, hit and click without releasing the click and drag the chosen video to the Video Timeline.

Step 3. Remove the original sound of the video

Right-click on it, and you would see the option of “Audio detach.” Click on it, and the audio file will detach from the video file and get added to Music Timeline.

Press “Delete” on your keyboard, and you will get rid of it. You can save this video without the audio, and you would only have the visuals, unimpaired and unaffected in any way, without the sound.

Step 4. Add a new audio track

You can add a new audio track to the video by choosing royalty sound or music from the Filmora library or importing any audio you like.

Part 2: How to change audio in video with Windows Movie Maker

The second method, Apart from replacing audio by Filmora, you can also make it by Windows Movie Maker. Though it is discontinued to develop a new version, you can still use it in Windows 7. Below are the steps to replace audio in Windows Movie Maker .

Step 1: Import video

First, download and run it. Click Add videos and photos to import video.

Step 2: Turn off the original sound

Click Edit tab > Video volume to turn off the sound by draging the slider to the left.

Step 3: Add audio to video

Click Add music to import the targeted music to Windows Movie Maker. You can select Add music or Add music at the current point.

Step 4: Save project

Click the file icon in the top left corner to save the video. Choose Save movie to export the targeted file.

Wondershare Filmora allows you to replace easily and edit the audio in the video

Unfortunately, no application by default on your desktop or laptop, phone, or tablet would get this done. To replace audio in the video, you would need the help of state of the art software. Fortunately, you have Wondershare Filmora at your disposal.

With Wondershare Filmora, you can replace audio in the video, mute audio, detach the audio, and add audio. You can eliminate background noise, organic noise, sound effects, address the sync problem in a video file, and edit the audio in a video without any extensive training or expertise.

• It has a user-friendly interface which makes things simple even for amateurs.
• It supports all common video and audio formats, including WMV, MOV, FLV, MTS, MP4, etc.
• You can move audio, replace it or add new audio to the video without worrying about general loss, which is loss of quality.
• You can export the edited video with the new or edited audio to various devices, including the cloud and social media sites.
• Compatible with Windows (including Windows 8) & Mac OS X (10.6 and above).

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 How to change audio in video with Windows Movie Maker

Part 1: How to replace audio in video with Filmora

The first method, let us explore how you can replace audio in video with Wondershare Filmora.

To begin with, get a free trial copy of Wondershare Filmora .

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1. Import file

Open the application and click ‘ Import once you have downloaded and installed Wondershare Filmora. Please search for the relevant video you wish to edit and load it from the hard disk or the specific folder. You can select multiple videos using ‘ctrl’ and clicking on the chosen files.

Step 2. Drag and drop to the video Timeline

The videos selected will be displayed as thumbnails. Choose a video, hit and click without releasing the click and drag the chosen video to the Video Timeline.

Click here

Step 3. Remove the original sound of the video

Right-click on it, and you would see the option of “Audio detach.” Click on it, and the audio file will detach from the video file and get added to Music Timeline.

Press “Delete” on your keyboard, and you will get rid of it. You can save this video without the audio, and you would only have the visuals, unimpaired and unaffected in any way, without the sound.

Step 4. Add a new audio track

You can add a new audio track to the video by choosing royalty sound or music from the Filmora library or importing any audio you like.

Part 2: How to change audio in video with Windows Movie Maker

The second method, Apart from replacing audio by Filmora, you can also make it by Windows Movie Maker. Though it is discontinued to develop a new version, you can still use it in Windows 7. Below are the steps to replace audio in Windows Movie Maker .

Step 1: Import video

First, download and run it. Click Add videos and photos to import video.

Step 2: Turn off the original sound

Click Edit tab > Video volume to turn off the sound by draging the slider to the left.

Step 3: Add audio to video

Click Add music to import the targeted music to Windows Movie Maker. You can select Add music or Add music at the current point.

Step 4: Save project

Click the file icon in the top left corner to save the video. Choose Save movie to export the targeted file.

Wondershare Filmora allows you to replace easily and edit the audio in the video

Unfortunately, no application by default on your desktop or laptop, phone, or tablet would get this done. To replace audio in the video, you would need the help of state of the art software. Fortunately, you have Wondershare Filmora at your disposal.

With Wondershare Filmora, you can replace audio in the video, mute audio, detach the audio, and add audio. You can eliminate background noise, organic noise, sound effects, address the sync problem in a video file, and edit the audio in a video without any extensive training or expertise.

• It has a user-friendly interface which makes things simple even for amateurs.
• It supports all common video and audio formats, including WMV, MOV, FLV, MTS, MP4, etc.
• You can move audio, replace it or add new audio to the video without worrying about general loss, which is loss of quality.
• You can export the edited video with the new or edited audio to various devices, including the cloud and social media sites.
• Compatible with Windows (including Windows 8) & Mac OS X (10.6 and above).

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 How to change audio in video with Windows Movie Maker

Part 1: How to replace audio in video with Filmora

The first method, let us explore how you can replace audio in video with Wondershare Filmora.

To begin with, get a free trial copy of Wondershare Filmora .

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1. Import file

Open the application and click ‘ Import once you have downloaded and installed Wondershare Filmora. Please search for the relevant video you wish to edit and load it from the hard disk or the specific folder. You can select multiple videos using ‘ctrl’ and clicking on the chosen files.

Step 2. Drag and drop to the video Timeline

The videos selected will be displayed as thumbnails. Choose a video, hit and click without releasing the click and drag the chosen video to the Video Timeline.

Step 3. Remove the original sound of the video

Right-click on it, and you would see the option of “Audio detach.” Click on it, and the audio file will detach from the video file and get added to Music Timeline.

Press “Delete” on your keyboard, and you will get rid of it. You can save this video without the audio, and you would only have the visuals, unimpaired and unaffected in any way, without the sound.

Step 4. Add a new audio track

You can add a new audio track to the video by choosing royalty sound or music from the Filmora library or importing any audio you like.

Part 2: How to change audio in video with Windows Movie Maker

The second method, Apart from replacing audio by Filmora, you can also make it by Windows Movie Maker. Though it is discontinued to develop a new version, you can still use it in Windows 7. Below are the steps to replace audio in Windows Movie Maker .

Step 1: Import video

First, download and run it. Click Add videos and photos to import video.

Step 2: Turn off the original sound

Click Edit tab > Video volume to turn off the sound by draging the slider to the left.

Step 3: Add audio to video

Click Add music to import the targeted music to Windows Movie Maker. You can select Add music or Add music at the current point.

Step 4: Save project

Click the file icon in the top left corner to save the video. Choose Save movie to export the targeted file.

Wondershare Filmora allows you to replace easily and edit the audio in the video

Unfortunately, no application by default on your desktop or laptop, phone, or tablet would get this done. To replace audio in the video, you would need the help of state of the art software. Fortunately, you have Wondershare Filmora at your disposal.

With Wondershare Filmora, you can replace audio in the video, mute audio, detach the audio, and add audio. You can eliminate background noise, organic noise, sound effects, address the sync problem in a video file, and edit the audio in a video without any extensive training or expertise.

• It has a user-friendly interface which makes things simple even for amateurs.
• It supports all common video and audio formats, including WMV, MOV, FLV, MTS, MP4, etc.
• You can move audio, replace it or add new audio to the video without worrying about general loss, which is loss of quality.
• You can export the edited video with the new or edited audio to various devices, including the cloud and social media sites.
• Compatible with Windows (including Windows 8) & Mac OS X (10.6 and above).

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 How to change audio in video with Windows Movie Maker

Part 1: How to replace audio in video with Filmora

The first method, let us explore how you can replace audio in video with Wondershare Filmora.

To begin with, get a free trial copy of Wondershare Filmora .

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1. Import file

Open the application and click ‘ Import once you have downloaded and installed Wondershare Filmora. Please search for the relevant video you wish to edit and load it from the hard disk or the specific folder. You can select multiple videos using ‘ctrl’ and clicking on the chosen files.

Step 2. Drag and drop to the video Timeline

The videos selected will be displayed as thumbnails. Choose a video, hit and click without releasing the click and drag the chosen video to the Video Timeline.

Step 3. Remove the original sound of the video

Right-click on it, and you would see the option of “Audio detach.” Click on it, and the audio file will detach from the video file and get added to Music Timeline.

Press “Delete” on your keyboard, and you will get rid of it. You can save this video without the audio, and you would only have the visuals, unimpaired and unaffected in any way, without the sound.

Step 4. Add a new audio track

You can add a new audio track to the video by choosing royalty sound or music from the Filmora library or importing any audio you like.

Part 2: How to change audio in video with Windows Movie Maker

The second method, Apart from replacing audio by Filmora, you can also make it by Windows Movie Maker. Though it is discontinued to develop a new version, you can still use it in Windows 7. Below are the steps to replace audio in Windows Movie Maker .

Step 1: Import video

First, download and run it. Click Add videos and photos to import video.

Step 2: Turn off the original sound

Click Edit tab > Video volume to turn off the sound by draging the slider to the left.

Step 3: Add audio to video

Click Add music to import the targeted music to Windows Movie Maker. You can select Add music or Add music at the current point.

Step 4: Save project

Click the file icon in the top left corner to save the video. Choose Save movie to export the targeted file.

Wondershare Filmora allows you to replace easily and edit the audio in the video

Unfortunately, no application by default on your desktop or laptop, phone, or tablet would get this done. To replace audio in the video, you would need the help of state of the art software. Fortunately, you have Wondershare Filmora at your disposal.

With Wondershare Filmora, you can replace audio in the video, mute audio, detach the audio, and add audio. You can eliminate background noise, organic noise, sound effects, address the sync problem in a video file, and edit the audio in a video without any extensive training or expertise.

• It has a user-friendly interface which makes things simple even for amateurs.
• It supports all common video and audio formats, including WMV, MOV, FLV, MTS, MP4, etc.
• You can move audio, replace it or add new audio to the video without worrying about general loss, which is loss of quality.
• You can export the edited video with the new or edited audio to various devices, including the cloud and social media sites.
• Compatible with Windows (including Windows 8) & Mac OS X (10.6 and above).

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Fine-Tuning Film Soundtracks: Strategies for Precise Audio Timing with Keyframes in Final Cut Pro X

How to Add and Modify Audio Keyframes in Final Cut Pro X

Benjamin Arango

Aug 18, 2022• Proven solutions

Are you familiar with audio keyframing? So, what is this audio keyframing? Does this term appear new for you? It won’t anymore as we are here to explain. In the world of animation, knowing about keyframes is more critical. Have you ever noticed certain scenes while watching a movie that would reflect different audio volume in other video clips? It is all because of this process of keyframing that allows you to change the parameter values in a video clip. A keyframe on the clip specifies the start and end of the changes that occur in the frames, images, or drawings.

Filmmaking, hand-drawn animation, and short movies are critical applications where keyframing finds the place, especially in changing positions, scaling subjects, and customizing opacity. Although the concept might seem in-depth and confusing, implementing such keyframes isn’t a hassle as you think if you have a handy video editor. Today, let’s look at one such software, Final Cut Pro X, which is the popular tool for Mac at present in keyframing. With no delay, scroll down to add and edit audio keyframes in FCPX at ease.

Part 1: How to Add Audio Keyframes in Final Cut Pro X?

So, how to precisely add the Final Cut Pro keyframes? This session will reveal the answer as we have given a step-by-step guide.

Step 1: Launch and open the Final Cut Pro X software on your Mac device. Select the video clip in the timeline or select a video from the location.

Now, choose “Clip > Show Audio Animation”, or you can also press Ctrl + A.

Step 2: You will now see various automation options to change the audio of the clips.

To add keyframes, you have to hold or press option-K to create a keyframe on the horizontal effect control that will result in a white diamond depicting the created keyframes.

Step 3: Apart from the Audio Animator tool, you can create a Final Cut Pro audio keyframe with the range selection tool. To do so, on the video timeline, you need to sue the keyframe shortcut Final Cut Pro, which is to hold down R.

Hold the R key down, and on the timeline, click the spot where you need to begin the keyframing, drag the mouse pointer to the area where the keyframing should end. It will mark a range with a diamond.

That is the way you can add a fcpx audio keyframe, and is it easy?

Part 2: How to Modify Audio Keyframes in Final Cut Pro X?

Now that you have successfully created or added audio keyframes fcpx, do you wish to adjust or modify them, like changing the volume or any other enhancements? Yes, Final Cut Pro X offers adjustments. Learn how to do it from here.

Step 1: Usually, users follow the same way in the keyframe to change the volume per your requirement on the “Volume and Pan” segment.

You can slide the volume pointer as needed, or from the inverted triangle next to the option, you can choose the “Reset Parameter” option to reset the changes.

Step 2: You can configure the Pan option of the keyframe and FCPX that offers multiples ones like stereo left/right, basic surround, create space, and so on.

Step 3: To adjust the audio animation editor’s keyframes, you can drag the diamond to the left/right to change the keyframe position.

If you want to alter the effect’s parameter value, you can drag the keyframe up or down.

There is one more option by which you can edit the final cut pro audio keyframe. If you click the “Final Cut Pro” option on the top and choose the editing option, it will show you various options to adjust the keyframes like reference waveforms, transitions, etc.

With access to the in-built options offered by Final Cut Pro X, you can easily adjust the created or added fcpx audio keyframe at ease.

Part 3: FAQs about Audio Keyframing in Final Cut Pro X?

1. Will changing the “Show reference waveform” checkbox on the editing window’s audio aspect affect the fcpx audio keyframe?

No. A tick over the “Shoe reference waveforms” checkbox will only make changes over the timeline waveform representation. However, no change will occur on the keyframe unless the duration or still images get altered.

2. Can I add keyframes across a selected area automatically?

Yes, with the Range Selection tool’s assistance, you can add keyframes over a selected range automatically. To do so, execute the “Clip > Audio Animation > select an effect > disclosure button.” From the tools pop-up menu with the mouse icon, choose the option, “Range Selection.”

3. Despite Audio animation, is there any other option to adjust the fcpx keyframe?

Yes. To access many different effects in the Final Cut Pro X software, you can change the parameter values of sole keyframes using Audio Inspector.

4. Is viewing a single effect at a time in the Audio Animation editor is possible in FCPX?

Yes. If you have applied multiple effects to a clip and need to preserve a screen space, you can collapse the Audio Animation editor to view one impact at a time. Tapping the “Solo Animation” option from the Click Menu can execute this task.

5. Can I delete the created Final Cut Pro audio keyframe?

Sure. To delete an audio keyframe, select the keyframe, and press the “Shift + Delete” option. Now, navigate to the Audio Inspector, and hit the “Keyframe” button.

Conclusion

I am sure you are excited to know that working with the Final Cut Pro keyframe is easier than you have imagined. Yes, it is, and I hope with the ultimate guide on how to add keyframe Final Cut Pro X along with specific FAQs regarding fcpx audio keyframe, we have put a full-stop to your queries. So, with no delay, get started to make your video by audio keyframes on Final Cut Pro X!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Aug 18, 2022• Proven solutions

Are you familiar with audio keyframing? So, what is this audio keyframing? Does this term appear new for you? It won’t anymore as we are here to explain. In the world of animation, knowing about keyframes is more critical. Have you ever noticed certain scenes while watching a movie that would reflect different audio volume in other video clips? It is all because of this process of keyframing that allows you to change the parameter values in a video clip. A keyframe on the clip specifies the start and end of the changes that occur in the frames, images, or drawings.

Filmmaking, hand-drawn animation, and short movies are critical applications where keyframing finds the place, especially in changing positions, scaling subjects, and customizing opacity. Although the concept might seem in-depth and confusing, implementing such keyframes isn’t a hassle as you think if you have a handy video editor. Today, let’s look at one such software, Final Cut Pro X, which is the popular tool for Mac at present in keyframing. With no delay, scroll down to add and edit audio keyframes in FCPX at ease.

Part 1: How to Add Audio Keyframes in Final Cut Pro X?

So, how to precisely add the Final Cut Pro keyframes? This session will reveal the answer as we have given a step-by-step guide.

Step 1: Launch and open the Final Cut Pro X software on your Mac device. Select the video clip in the timeline or select a video from the location.

Now, choose “Clip > Show Audio Animation”, or you can also press Ctrl + A.

Step 2: You will now see various automation options to change the audio of the clips.

To add keyframes, you have to hold or press option-K to create a keyframe on the horizontal effect control that will result in a white diamond depicting the created keyframes.

Step 3: Apart from the Audio Animator tool, you can create a Final Cut Pro audio keyframe with the range selection tool. To do so, on the video timeline, you need to sue the keyframe shortcut Final Cut Pro, which is to hold down R.

Hold the R key down, and on the timeline, click the spot where you need to begin the keyframing, drag the mouse pointer to the area where the keyframing should end. It will mark a range with a diamond.

That is the way you can add a fcpx audio keyframe, and is it easy?

Part 2: How to Modify Audio Keyframes in Final Cut Pro X?

Now that you have successfully created or added audio keyframes fcpx, do you wish to adjust or modify them, like changing the volume or any other enhancements? Yes, Final Cut Pro X offers adjustments. Learn how to do it from here.

Step 1: Usually, users follow the same way in the keyframe to change the volume per your requirement on the “Volume and Pan” segment.

You can slide the volume pointer as needed, or from the inverted triangle next to the option, you can choose the “Reset Parameter” option to reset the changes.

Step 2: You can configure the Pan option of the keyframe and FCPX that offers multiples ones like stereo left/right, basic surround, create space, and so on.

Step 3: To adjust the audio animation editor’s keyframes, you can drag the diamond to the left/right to change the keyframe position.

If you want to alter the effect’s parameter value, you can drag the keyframe up or down.

There is one more option by which you can edit the final cut pro audio keyframe. If you click the “Final Cut Pro” option on the top and choose the editing option, it will show you various options to adjust the keyframes like reference waveforms, transitions, etc.

With access to the in-built options offered by Final Cut Pro X, you can easily adjust the created or added fcpx audio keyframe at ease.

Part 3: FAQs about Audio Keyframing in Final Cut Pro X?

1. Will changing the “Show reference waveform” checkbox on the editing window’s audio aspect affect the fcpx audio keyframe?

No. A tick over the “Shoe reference waveforms” checkbox will only make changes over the timeline waveform representation. However, no change will occur on the keyframe unless the duration or still images get altered.

2. Can I add keyframes across a selected area automatically?

Yes, with the Range Selection tool’s assistance, you can add keyframes over a selected range automatically. To do so, execute the “Clip > Audio Animation > select an effect > disclosure button.” From the tools pop-up menu with the mouse icon, choose the option, “Range Selection.”

3. Despite Audio animation, is there any other option to adjust the fcpx keyframe?

Yes. To access many different effects in the Final Cut Pro X software, you can change the parameter values of sole keyframes using Audio Inspector.

4. Is viewing a single effect at a time in the Audio Animation editor is possible in FCPX?

Yes. If you have applied multiple effects to a clip and need to preserve a screen space, you can collapse the Audio Animation editor to view one impact at a time. Tapping the “Solo Animation” option from the Click Menu can execute this task.

5. Can I delete the created Final Cut Pro audio keyframe?

Sure. To delete an audio keyframe, select the keyframe, and press the “Shift + Delete” option. Now, navigate to the Audio Inspector, and hit the “Keyframe” button.

Conclusion

I am sure you are excited to know that working with the Final Cut Pro keyframe is easier than you have imagined. Yes, it is, and I hope with the ultimate guide on how to add keyframe Final Cut Pro X along with specific FAQs regarding fcpx audio keyframe, we have put a full-stop to your queries. So, with no delay, get started to make your video by audio keyframes on Final Cut Pro X!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Aug 18, 2022• Proven solutions

Are you familiar with audio keyframing? So, what is this audio keyframing? Does this term appear new for you? It won’t anymore as we are here to explain. In the world of animation, knowing about keyframes is more critical. Have you ever noticed certain scenes while watching a movie that would reflect different audio volume in other video clips? It is all because of this process of keyframing that allows you to change the parameter values in a video clip. A keyframe on the clip specifies the start and end of the changes that occur in the frames, images, or drawings.

Filmmaking, hand-drawn animation, and short movies are critical applications where keyframing finds the place, especially in changing positions, scaling subjects, and customizing opacity. Although the concept might seem in-depth and confusing, implementing such keyframes isn’t a hassle as you think if you have a handy video editor. Today, let’s look at one such software, Final Cut Pro X, which is the popular tool for Mac at present in keyframing. With no delay, scroll down to add and edit audio keyframes in FCPX at ease.

Part 1: How to Add Audio Keyframes in Final Cut Pro X?

So, how to precisely add the Final Cut Pro keyframes? This session will reveal the answer as we have given a step-by-step guide.

Step 1: Launch and open the Final Cut Pro X software on your Mac device. Select the video clip in the timeline or select a video from the location.

Now, choose “Clip > Show Audio Animation”, or you can also press Ctrl + A.

Step 2: You will now see various automation options to change the audio of the clips.

To add keyframes, you have to hold or press option-K to create a keyframe on the horizontal effect control that will result in a white diamond depicting the created keyframes.

Step 3: Apart from the Audio Animator tool, you can create a Final Cut Pro audio keyframe with the range selection tool. To do so, on the video timeline, you need to sue the keyframe shortcut Final Cut Pro, which is to hold down R.

Hold the R key down, and on the timeline, click the spot where you need to begin the keyframing, drag the mouse pointer to the area where the keyframing should end. It will mark a range with a diamond.

That is the way you can add a fcpx audio keyframe, and is it easy?

Part 2: How to Modify Audio Keyframes in Final Cut Pro X?

Now that you have successfully created or added audio keyframes fcpx, do you wish to adjust or modify them, like changing the volume or any other enhancements? Yes, Final Cut Pro X offers adjustments. Learn how to do it from here.

Step 1: Usually, users follow the same way in the keyframe to change the volume per your requirement on the “Volume and Pan” segment.

You can slide the volume pointer as needed, or from the inverted triangle next to the option, you can choose the “Reset Parameter” option to reset the changes.

Step 2: You can configure the Pan option of the keyframe and FCPX that offers multiples ones like stereo left/right, basic surround, create space, and so on.

Step 3: To adjust the audio animation editor’s keyframes, you can drag the diamond to the left/right to change the keyframe position.

If you want to alter the effect’s parameter value, you can drag the keyframe up or down.

There is one more option by which you can edit the final cut pro audio keyframe. If you click the “Final Cut Pro” option on the top and choose the editing option, it will show you various options to adjust the keyframes like reference waveforms, transitions, etc.

With access to the in-built options offered by Final Cut Pro X, you can easily adjust the created or added fcpx audio keyframe at ease.

Part 3: FAQs about Audio Keyframing in Final Cut Pro X?

1. Will changing the “Show reference waveform” checkbox on the editing window’s audio aspect affect the fcpx audio keyframe?

No. A tick over the “Shoe reference waveforms” checkbox will only make changes over the timeline waveform representation. However, no change will occur on the keyframe unless the duration or still images get altered.

2. Can I add keyframes across a selected area automatically?

Yes, with the Range Selection tool’s assistance, you can add keyframes over a selected range automatically. To do so, execute the “Clip > Audio Animation > select an effect > disclosure button.” From the tools pop-up menu with the mouse icon, choose the option, “Range Selection.”

3. Despite Audio animation, is there any other option to adjust the fcpx keyframe?

Yes. To access many different effects in the Final Cut Pro X software, you can change the parameter values of sole keyframes using Audio Inspector.

4. Is viewing a single effect at a time in the Audio Animation editor is possible in FCPX?

Yes. If you have applied multiple effects to a clip and need to preserve a screen space, you can collapse the Audio Animation editor to view one impact at a time. Tapping the “Solo Animation” option from the Click Menu can execute this task.

5. Can I delete the created Final Cut Pro audio keyframe?

Sure. To delete an audio keyframe, select the keyframe, and press the “Shift + Delete” option. Now, navigate to the Audio Inspector, and hit the “Keyframe” button.

Conclusion

I am sure you are excited to know that working with the Final Cut Pro keyframe is easier than you have imagined. Yes, it is, and I hope with the ultimate guide on how to add keyframe Final Cut Pro X along with specific FAQs regarding fcpx audio keyframe, we have put a full-stop to your queries. So, with no delay, get started to make your video by audio keyframes on Final Cut Pro X!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Aug 18, 2022• Proven solutions

Are you familiar with audio keyframing? So, what is this audio keyframing? Does this term appear new for you? It won’t anymore as we are here to explain. In the world of animation, knowing about keyframes is more critical. Have you ever noticed certain scenes while watching a movie that would reflect different audio volume in other video clips? It is all because of this process of keyframing that allows you to change the parameter values in a video clip. A keyframe on the clip specifies the start and end of the changes that occur in the frames, images, or drawings.

Filmmaking, hand-drawn animation, and short movies are critical applications where keyframing finds the place, especially in changing positions, scaling subjects, and customizing opacity. Although the concept might seem in-depth and confusing, implementing such keyframes isn’t a hassle as you think if you have a handy video editor. Today, let’s look at one such software, Final Cut Pro X, which is the popular tool for Mac at present in keyframing. With no delay, scroll down to add and edit audio keyframes in FCPX at ease.

Part 1: How to Add Audio Keyframes in Final Cut Pro X?

So, how to precisely add the Final Cut Pro keyframes? This session will reveal the answer as we have given a step-by-step guide.

Step 1: Launch and open the Final Cut Pro X software on your Mac device. Select the video clip in the timeline or select a video from the location.

Now, choose “Clip > Show Audio Animation”, or you can also press Ctrl + A.

Step 2: You will now see various automation options to change the audio of the clips.

To add keyframes, you have to hold or press option-K to create a keyframe on the horizontal effect control that will result in a white diamond depicting the created keyframes.

Step 3: Apart from the Audio Animator tool, you can create a Final Cut Pro audio keyframe with the range selection tool. To do so, on the video timeline, you need to sue the keyframe shortcut Final Cut Pro, which is to hold down R.

Hold the R key down, and on the timeline, click the spot where you need to begin the keyframing, drag the mouse pointer to the area where the keyframing should end. It will mark a range with a diamond.

That is the way you can add a fcpx audio keyframe, and is it easy?

Part 2: How to Modify Audio Keyframes in Final Cut Pro X?

Now that you have successfully created or added audio keyframes fcpx, do you wish to adjust or modify them, like changing the volume or any other enhancements? Yes, Final Cut Pro X offers adjustments. Learn how to do it from here.

Step 1: Usually, users follow the same way in the keyframe to change the volume per your requirement on the “Volume and Pan” segment.

You can slide the volume pointer as needed, or from the inverted triangle next to the option, you can choose the “Reset Parameter” option to reset the changes.

Step 2: You can configure the Pan option of the keyframe and FCPX that offers multiples ones like stereo left/right, basic surround, create space, and so on.

Step 3: To adjust the audio animation editor’s keyframes, you can drag the diamond to the left/right to change the keyframe position.

If you want to alter the effect’s parameter value, you can drag the keyframe up or down.

There is one more option by which you can edit the final cut pro audio keyframe. If you click the “Final Cut Pro” option on the top and choose the editing option, it will show you various options to adjust the keyframes like reference waveforms, transitions, etc.

With access to the in-built options offered by Final Cut Pro X, you can easily adjust the created or added fcpx audio keyframe at ease.

Part 3: FAQs about Audio Keyframing in Final Cut Pro X?

1. Will changing the “Show reference waveform” checkbox on the editing window’s audio aspect affect the fcpx audio keyframe?

No. A tick over the “Shoe reference waveforms” checkbox will only make changes over the timeline waveform representation. However, no change will occur on the keyframe unless the duration or still images get altered.

2. Can I add keyframes across a selected area automatically?

Yes, with the Range Selection tool’s assistance, you can add keyframes over a selected range automatically. To do so, execute the “Clip > Audio Animation > select an effect > disclosure button.” From the tools pop-up menu with the mouse icon, choose the option, “Range Selection.”

3. Despite Audio animation, is there any other option to adjust the fcpx keyframe?

Yes. To access many different effects in the Final Cut Pro X software, you can change the parameter values of sole keyframes using Audio Inspector.

4. Is viewing a single effect at a time in the Audio Animation editor is possible in FCPX?

Yes. If you have applied multiple effects to a clip and need to preserve a screen space, you can collapse the Audio Animation editor to view one impact at a time. Tapping the “Solo Animation” option from the Click Menu can execute this task.

5. Can I delete the created Final Cut Pro audio keyframe?

Sure. To delete an audio keyframe, select the keyframe, and press the “Shift + Delete” option. Now, navigate to the Audio Inspector, and hit the “Keyframe” button.

Conclusion

I am sure you are excited to know that working with the Final Cut Pro keyframe is easier than you have imagined. Yes, it is, and I hope with the ultimate guide on how to add keyframe Final Cut Pro X along with specific FAQs regarding fcpx audio keyframe, we have put a full-stop to your queries. So, with no delay, get started to make your video by audio keyframes on Final Cut Pro X!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Also read: