“The Ultimate Compilation of Free Sound Amplitude Balancers”

When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!

So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.

With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.

Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.

As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!

So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.

Wondershare Filmora X

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

“Learn the Basics of Adding Music and Effects to iMovie Videos”

Tutorials for Beginners: How to Add Audio to iMovie

Liza Brown

Jan 23, 2024• Proven solutions

iMovie is a video editing software program made by Apple. Capabilities include tools to alter and optimize video color settings, trim and pivot video clips, smooth shaky pictures, add video animations, and change the pace of recordings. you can also edit and enhance a project’s audio by eliminating background noise and increasing the audio levels of quiet segments. Or enjoy your films like never before with iMovie for iOS and macOS. It’s simple to search through your footage and make Hollywood-style trailers and gorgeous 4K-resolution movies.

You may even begin editing on your iPhone or iPad and finish on your Mac. It’s never been easier to implement it in the movies, whether you’re using a Mac or an iOS smartphone. Simply select your clips and then add titles, music, and effects. iMovie even supports 4K video, allowing you to create amazing cinema-quality videos. That’s all there is to it, ladies and gentlemen.

Create professional-looking films using iMovie even if you don’t have a degree in editing. Add images and videos to projects with a single click, cut clips with your finger, create flawless transitions, and fade sounds like a pro. Choose from 13 unique video filters to give a dramatic touch to your movie. Make your film look like it’s from the silent era, a classic western, or a fun comic book. Applying filters to specific segments or your entire video, as well as adjusting the strength, is straightforward on your iPhone or iPad. Slow down action pictures to make them more interesting. Allow viewers to soar across scenes by accelerating them. Alternatively, use picture-in-picture and split-screen techniques to give your school report a broadcast vibe.

In this tutorial, we’ll show you how to add audio to iMovie via different methods. Here we go.

If you want to add audio to video via your android phone , check this out.

Part 1. How to Add Audio to iMovie on iPhone/iPad?

Step #1. In your iMovie project, tap the ADD MEDIA (+ Symbol) button.

Step #2. Then, choose AUDIO.

You will now be given three options. Soundtracks, My Music, and Songs in iCloud. Make your choice.

To listen to a soundtrack, tap it. If a soundtrack is muted, press it to download it first, and then hit it again to preview it.

Step #3. To add a soundtrack to your project, hit the Add Audio icon next to it. iMovie will automatically insert the music at the beginning of the project and adjust it to match the duration of the project.

Adding sound effects

When you add a sound effect, it is linked to the video clip above it in the timeline. When you move the video clip, the sound effect moves with it. This differs from soundtracks, which are separate from the video segments in your production.

Scroll the timeline with your project open until the play head (the white vertical line) appears where you wish to add the sound effect.

To browse the built-in sound effects, press the Add Media button, then Audio, then Sound Effects.

To hear a sound effect, tap it.

Tap the Add Audio button next to the sound effect to add it.

Step #4. Adjust the volume of the clip

After you’ve added sound to your iMovie project, you may change the level of audio clips to achieve the ideal sound mix, or change the level of video clips that have sound. To change the volume of an audio or video clip, select it in the timeline, click the Volume button at the bottom of the window, and then drag the slider to raise or decrease the volume. When you completely reduce the volume of a clip, a Mute symbol displays on the clip in the timeline.

Part 2. How to Add Audio to iMovie on Mac?

iMovie for Mac comes with a library of music and sound clips that you may use in your project. In addition to sound effects such as rain and footsteps, iMovie includes audio clips such as ambiances and jingles.

Step #1. With your project open, go to the top of the browser and select Audio, followed by Sound Effects in the sidebar on the left. To access the Media Browser, you may need to click the Media Browser button.

Step #2. Hover the pointer over a jingle or sound clip in the list to preview it, and then click the play button next to the sound clip. You may also preview a song or sound clip by selecting it, clicking on the waveform at the top of the media browser, and then pressing the Spacebar.

Step #3. Drag jingles or other audio clips to the music well, represented by the musical note icon in the timeline, to create background music for your film. The video clips in the timeline have no effect on the audio in the music well.

Step #4. To add music or sound effects to a video clip, drag it under the video clip until a bar linking the clips appears. When you move the connected video clip, the audio follows.

Part 3. How to Add Audio to iMovie from iTunes?

If you want to add songs such as M4P music and Apple Music from iTunes to iMovie but discover that all of the music is protected, all you need is the Sidify Apple Music Converter. Sidify Apple Music Converter enables you to download music without quality loss. One of Sidify’s distinctive advantages is its ability to remove protection at an extremely quick rate – up to 20 times faster than any other similar program. The software’s user interface is straightforward. The program is simple to use even for inexperienced users. In this section, we’ll teach you how to add M4P music and Apple Music to an iMovie project as background music.

What you’ll need:

• A Mac or Windows computer running macOS or Windows OS
• The most recent version of iTunes
• Sidify Apple Music Converter is available
• Sidify Apple Music Converter can now play Apple Music

Launch Sidify Apple Music Converter, click the + button, and all the tunes you’ve downloaded from Apple Music will appear in the adding music window, as seen below. Select the song to be converted and click OK.

Step 1. Select a file type

A setting window would appear after clicking the setting button or the little gear icon on the upper right of the Sidify interface. You may select an output format such as MP3, M4A, WAV, FLAC, or AIFF, as well as a conversion speed of up to 10X and an output quality of up to 320 Kbps. Furthermore, the output path can be changed if necessary.

Step 2. Begin the conversion

Once all of the files have been added to the queue and all of the settings have been completed, click the Convert button.

Step 3. Find the best-converted music files for iMovie

Now, on your Mac computer, click the Menu button to locate the converted iTunes Music files in the target folder. The music may then be readily added to an iMovie project just like any other standard audio file.

Part 4. How to Add Audio to iMovie from Spotify?

Offline playback is possible with a Spotify Premium membership. You may save songs, playlists, or albums to listen to later. The essential element to remember is that Spotify music, whether online or offline, can only be accessed through the Spotify application. To put it another way, you do not have permission to import Spotify music into other third-party software programs. It comes with iMovie and other video editing software.

Step #1. Import music from Spotify into AudFree. The AudFree Spotify converter must be compatible with the Spotify app. When you run AudFree program from your computer’s desktop, Spotify will immediately load. You may now begin to uncover preferred Spotify tunes to add to iMovie. Import them into AudFree by copying and pasting or dragging and dropping.

Step #2. Set the output format and other preferences for iMovie. MP3, WAV, M4A, and AIFF are all supported by iMovie. You may go to the top menu and select ‘Preferences’ > ‘Convert’. A setting window will appear. You may select one of the iMovie-supported audio formats as the output format in the window. You can also change the output parameters.

Step #3. Spotify tracks may be converted for use in iMovie. To begin the download, click the ‘Convert’ button in the bottom-right corner of the main screen. AudFree program will download Spotify music to target iMovie files at up to 5X quicker speeds. You should disable your antivirus or firewall to make the converting process more stable.

Part 5. The Best Alternative to iMovie on Mac

Although iMovie has the amazing features anyone could wish to work with when crafting an interesting content, it has been seen to be limited in some ways. This is why Wondershare Filmora is the best alternative to iMovie. Filmora allows you to swiftly adjust audio effects and edit sound, ensuring that your demands are met.

Wrap Up

iMovie is an essential video editing tool, and that’s all there is to do when it comes to adding audio to iMovie videos.

iMovie, on the other hand, is limited if you want to test out new capabilities like editing films with amazing effects. This is where Filmora may come in handy in such cases.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Jan 23, 2024• Proven solutions

iMovie is a video editing software program made by Apple. Capabilities include tools to alter and optimize video color settings, trim and pivot video clips, smooth shaky pictures, add video animations, and change the pace of recordings. you can also edit and enhance a project’s audio by eliminating background noise and increasing the audio levels of quiet segments. Or enjoy your films like never before with iMovie for iOS and macOS. It’s simple to search through your footage and make Hollywood-style trailers and gorgeous 4K-resolution movies.

You may even begin editing on your iPhone or iPad and finish on your Mac. It’s never been easier to implement it in the movies, whether you’re using a Mac or an iOS smartphone. Simply select your clips and then add titles, music, and effects. iMovie even supports 4K video, allowing you to create amazing cinema-quality videos. That’s all there is to it, ladies and gentlemen.

Create professional-looking films using iMovie even if you don’t have a degree in editing. Add images and videos to projects with a single click, cut clips with your finger, create flawless transitions, and fade sounds like a pro. Choose from 13 unique video filters to give a dramatic touch to your movie. Make your film look like it’s from the silent era, a classic western, or a fun comic book. Applying filters to specific segments or your entire video, as well as adjusting the strength, is straightforward on your iPhone or iPad. Slow down action pictures to make them more interesting. Allow viewers to soar across scenes by accelerating them. Alternatively, use picture-in-picture and split-screen techniques to give your school report a broadcast vibe.

In this tutorial, we’ll show you how to add audio to iMovie via different methods. Here we go.

If you want to add audio to video via your android phone , check this out.

Part 1. How to Add Audio to iMovie on iPhone/iPad?

Step #1. In your iMovie project, tap the ADD MEDIA (+ Symbol) button.

Step #2. Then, choose AUDIO.

You will now be given three options. Soundtracks, My Music, and Songs in iCloud. Make your choice.

To listen to a soundtrack, tap it. If a soundtrack is muted, press it to download it first, and then hit it again to preview it.

Step #3. To add a soundtrack to your project, hit the Add Audio icon next to it. iMovie will automatically insert the music at the beginning of the project and adjust it to match the duration of the project.

Adding sound effects

When you add a sound effect, it is linked to the video clip above it in the timeline. When you move the video clip, the sound effect moves with it. This differs from soundtracks, which are separate from the video segments in your production.

Scroll the timeline with your project open until the play head (the white vertical line) appears where you wish to add the sound effect.

To browse the built-in sound effects, press the Add Media button, then Audio, then Sound Effects.

To hear a sound effect, tap it.

Tap the Add Audio button next to the sound effect to add it.

Step #4. Adjust the volume of the clip

After you’ve added sound to your iMovie project, you may change the level of audio clips to achieve the ideal sound mix, or change the level of video clips that have sound. To change the volume of an audio or video clip, select it in the timeline, click the Volume button at the bottom of the window, and then drag the slider to raise or decrease the volume. When you completely reduce the volume of a clip, a Mute symbol displays on the clip in the timeline.

Part 2. How to Add Audio to iMovie on Mac?

iMovie for Mac comes with a library of music and sound clips that you may use in your project. In addition to sound effects such as rain and footsteps, iMovie includes audio clips such as ambiances and jingles.

Step #1. With your project open, go to the top of the browser and select Audio, followed by Sound Effects in the sidebar on the left. To access the Media Browser, you may need to click the Media Browser button.

Step #2. Hover the pointer over a jingle or sound clip in the list to preview it, and then click the play button next to the sound clip. You may also preview a song or sound clip by selecting it, clicking on the waveform at the top of the media browser, and then pressing the Spacebar.

Step #3. Drag jingles or other audio clips to the music well, represented by the musical note icon in the timeline, to create background music for your film. The video clips in the timeline have no effect on the audio in the music well.

Step #4. To add music or sound effects to a video clip, drag it under the video clip until a bar linking the clips appears. When you move the connected video clip, the audio follows.

Part 3. How to Add Audio to iMovie from iTunes?

If you want to add songs such as M4P music and Apple Music from iTunes to iMovie but discover that all of the music is protected, all you need is the Sidify Apple Music Converter. Sidify Apple Music Converter enables you to download music without quality loss. One of Sidify’s distinctive advantages is its ability to remove protection at an extremely quick rate – up to 20 times faster than any other similar program. The software’s user interface is straightforward. The program is simple to use even for inexperienced users. In this section, we’ll teach you how to add M4P music and Apple Music to an iMovie project as background music.

What you’ll need:

• A Mac or Windows computer running macOS or Windows OS
• The most recent version of iTunes
• Sidify Apple Music Converter is available
• Sidify Apple Music Converter can now play Apple Music

Launch Sidify Apple Music Converter, click the + button, and all the tunes you’ve downloaded from Apple Music will appear in the adding music window, as seen below. Select the song to be converted and click OK.

Step 1. Select a file type

A setting window would appear after clicking the setting button or the little gear icon on the upper right of the Sidify interface. You may select an output format such as MP3, M4A, WAV, FLAC, or AIFF, as well as a conversion speed of up to 10X and an output quality of up to 320 Kbps. Furthermore, the output path can be changed if necessary.

Step 2. Begin the conversion

Once all of the files have been added to the queue and all of the settings have been completed, click the Convert button.

Step 3. Find the best-converted music files for iMovie

Now, on your Mac computer, click the Menu button to locate the converted iTunes Music files in the target folder. The music may then be readily added to an iMovie project just like any other standard audio file.

Part 4. How to Add Audio to iMovie from Spotify?

Offline playback is possible with a Spotify Premium membership. You may save songs, playlists, or albums to listen to later. The essential element to remember is that Spotify music, whether online or offline, can only be accessed through the Spotify application. To put it another way, you do not have permission to import Spotify music into other third-party software programs. It comes with iMovie and other video editing software.

Step #1. Import music from Spotify into AudFree. The AudFree Spotify converter must be compatible with the Spotify app. When you run AudFree program from your computer’s desktop, Spotify will immediately load. You may now begin to uncover preferred Spotify tunes to add to iMovie. Import them into AudFree by copying and pasting or dragging and dropping.

Step #2. Set the output format and other preferences for iMovie. MP3, WAV, M4A, and AIFF are all supported by iMovie. You may go to the top menu and select ‘Preferences’ > ‘Convert’. A setting window will appear. You may select one of the iMovie-supported audio formats as the output format in the window. You can also change the output parameters.

Step #3. Spotify tracks may be converted for use in iMovie. To begin the download, click the ‘Convert’ button in the bottom-right corner of the main screen. AudFree program will download Spotify music to target iMovie files at up to 5X quicker speeds. You should disable your antivirus or firewall to make the converting process more stable.

Part 5. The Best Alternative to iMovie on Mac

Although iMovie has the amazing features anyone could wish to work with when crafting an interesting content, it has been seen to be limited in some ways. This is why Wondershare Filmora is the best alternative to iMovie. Filmora allows you to swiftly adjust audio effects and edit sound, ensuring that your demands are met.

Wrap Up

iMovie is an essential video editing tool, and that’s all there is to do when it comes to adding audio to iMovie videos.

iMovie, on the other hand, is limited if you want to test out new capabilities like editing films with amazing effects. This is where Filmora may come in handy in such cases.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Jan 23, 2024• Proven solutions

iMovie is a video editing software program made by Apple. Capabilities include tools to alter and optimize video color settings, trim and pivot video clips, smooth shaky pictures, add video animations, and change the pace of recordings. you can also edit and enhance a project’s audio by eliminating background noise and increasing the audio levels of quiet segments. Or enjoy your films like never before with iMovie for iOS and macOS. It’s simple to search through your footage and make Hollywood-style trailers and gorgeous 4K-resolution movies.

You may even begin editing on your iPhone or iPad and finish on your Mac. It’s never been easier to implement it in the movies, whether you’re using a Mac or an iOS smartphone. Simply select your clips and then add titles, music, and effects. iMovie even supports 4K video, allowing you to create amazing cinema-quality videos. That’s all there is to it, ladies and gentlemen.

Create professional-looking films using iMovie even if you don’t have a degree in editing. Add images and videos to projects with a single click, cut clips with your finger, create flawless transitions, and fade sounds like a pro. Choose from 13 unique video filters to give a dramatic touch to your movie. Make your film look like it’s from the silent era, a classic western, or a fun comic book. Applying filters to specific segments or your entire video, as well as adjusting the strength, is straightforward on your iPhone or iPad. Slow down action pictures to make them more interesting. Allow viewers to soar across scenes by accelerating them. Alternatively, use picture-in-picture and split-screen techniques to give your school report a broadcast vibe.

In this tutorial, we’ll show you how to add audio to iMovie via different methods. Here we go.

If you want to add audio to video via your android phone , check this out.

Part 1. How to Add Audio to iMovie on iPhone/iPad?

Step #1. In your iMovie project, tap the ADD MEDIA (+ Symbol) button.

Step #2. Then, choose AUDIO.

You will now be given three options. Soundtracks, My Music, and Songs in iCloud. Make your choice.

To listen to a soundtrack, tap it. If a soundtrack is muted, press it to download it first, and then hit it again to preview it.

Step #3. To add a soundtrack to your project, hit the Add Audio icon next to it. iMovie will automatically insert the music at the beginning of the project and adjust it to match the duration of the project.

Adding sound effects

When you add a sound effect, it is linked to the video clip above it in the timeline. When you move the video clip, the sound effect moves with it. This differs from soundtracks, which are separate from the video segments in your production.

Scroll the timeline with your project open until the play head (the white vertical line) appears where you wish to add the sound effect.

To browse the built-in sound effects, press the Add Media button, then Audio, then Sound Effects.

To hear a sound effect, tap it.

Tap the Add Audio button next to the sound effect to add it.

Step #4. Adjust the volume of the clip

After you’ve added sound to your iMovie project, you may change the level of audio clips to achieve the ideal sound mix, or change the level of video clips that have sound. To change the volume of an audio or video clip, select it in the timeline, click the Volume button at the bottom of the window, and then drag the slider to raise or decrease the volume. When you completely reduce the volume of a clip, a Mute symbol displays on the clip in the timeline.

Part 2. How to Add Audio to iMovie on Mac?

iMovie for Mac comes with a library of music and sound clips that you may use in your project. In addition to sound effects such as rain and footsteps, iMovie includes audio clips such as ambiances and jingles.

Step #1. With your project open, go to the top of the browser and select Audio, followed by Sound Effects in the sidebar on the left. To access the Media Browser, you may need to click the Media Browser button.

Step #2. Hover the pointer over a jingle or sound clip in the list to preview it, and then click the play button next to the sound clip. You may also preview a song or sound clip by selecting it, clicking on the waveform at the top of the media browser, and then pressing the Spacebar.

Step #3. Drag jingles or other audio clips to the music well, represented by the musical note icon in the timeline, to create background music for your film. The video clips in the timeline have no effect on the audio in the music well.

Step #4. To add music or sound effects to a video clip, drag it under the video clip until a bar linking the clips appears. When you move the connected video clip, the audio follows.

Part 3. How to Add Audio to iMovie from iTunes?

If you want to add songs such as M4P music and Apple Music from iTunes to iMovie but discover that all of the music is protected, all you need is the Sidify Apple Music Converter. Sidify Apple Music Converter enables you to download music without quality loss. One of Sidify’s distinctive advantages is its ability to remove protection at an extremely quick rate – up to 20 times faster than any other similar program. The software’s user interface is straightforward. The program is simple to use even for inexperienced users. In this section, we’ll teach you how to add M4P music and Apple Music to an iMovie project as background music.

What you’ll need:

• A Mac or Windows computer running macOS or Windows OS
• The most recent version of iTunes
• Sidify Apple Music Converter is available
• Sidify Apple Music Converter can now play Apple Music

Launch Sidify Apple Music Converter, click the + button, and all the tunes you’ve downloaded from Apple Music will appear in the adding music window, as seen below. Select the song to be converted and click OK.

Step 1. Select a file type

A setting window would appear after clicking the setting button or the little gear icon on the upper right of the Sidify interface. You may select an output format such as MP3, M4A, WAV, FLAC, or AIFF, as well as a conversion speed of up to 10X and an output quality of up to 320 Kbps. Furthermore, the output path can be changed if necessary.

Step 2. Begin the conversion

Once all of the files have been added to the queue and all of the settings have been completed, click the Convert button.

Step 3. Find the best-converted music files for iMovie

Now, on your Mac computer, click the Menu button to locate the converted iTunes Music files in the target folder. The music may then be readily added to an iMovie project just like any other standard audio file.

Part 4. How to Add Audio to iMovie from Spotify?

Offline playback is possible with a Spotify Premium membership. You may save songs, playlists, or albums to listen to later. The essential element to remember is that Spotify music, whether online or offline, can only be accessed through the Spotify application. To put it another way, you do not have permission to import Spotify music into other third-party software programs. It comes with iMovie and other video editing software.

Step #1. Import music from Spotify into AudFree. The AudFree Spotify converter must be compatible with the Spotify app. When you run AudFree program from your computer’s desktop, Spotify will immediately load. You may now begin to uncover preferred Spotify tunes to add to iMovie. Import them into AudFree by copying and pasting or dragging and dropping.

Step #2. Set the output format and other preferences for iMovie. MP3, WAV, M4A, and AIFF are all supported by iMovie. You may go to the top menu and select ‘Preferences’ > ‘Convert’. A setting window will appear. You may select one of the iMovie-supported audio formats as the output format in the window. You can also change the output parameters.

Step #3. Spotify tracks may be converted for use in iMovie. To begin the download, click the ‘Convert’ button in the bottom-right corner of the main screen. AudFree program will download Spotify music to target iMovie files at up to 5X quicker speeds. You should disable your antivirus or firewall to make the converting process more stable.

Part 5. The Best Alternative to iMovie on Mac

Although iMovie has the amazing features anyone could wish to work with when crafting an interesting content, it has been seen to be limited in some ways. This is why Wondershare Filmora is the best alternative to iMovie. Filmora allows you to swiftly adjust audio effects and edit sound, ensuring that your demands are met.

Wrap Up

iMovie is an essential video editing tool, and that’s all there is to do when it comes to adding audio to iMovie videos.

iMovie, on the other hand, is limited if you want to test out new capabilities like editing films with amazing effects. This is where Filmora may come in handy in such cases.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Jan 23, 2024• Proven solutions

iMovie is a video editing software program made by Apple. Capabilities include tools to alter and optimize video color settings, trim and pivot video clips, smooth shaky pictures, add video animations, and change the pace of recordings. you can also edit and enhance a project’s audio by eliminating background noise and increasing the audio levels of quiet segments. Or enjoy your films like never before with iMovie for iOS and macOS. It’s simple to search through your footage and make Hollywood-style trailers and gorgeous 4K-resolution movies.

You may even begin editing on your iPhone or iPad and finish on your Mac. It’s never been easier to implement it in the movies, whether you’re using a Mac or an iOS smartphone. Simply select your clips and then add titles, music, and effects. iMovie even supports 4K video, allowing you to create amazing cinema-quality videos. That’s all there is to it, ladies and gentlemen.

Create professional-looking films using iMovie even if you don’t have a degree in editing. Add images and videos to projects with a single click, cut clips with your finger, create flawless transitions, and fade sounds like a pro. Choose from 13 unique video filters to give a dramatic touch to your movie. Make your film look like it’s from the silent era, a classic western, or a fun comic book. Applying filters to specific segments or your entire video, as well as adjusting the strength, is straightforward on your iPhone or iPad. Slow down action pictures to make them more interesting. Allow viewers to soar across scenes by accelerating them. Alternatively, use picture-in-picture and split-screen techniques to give your school report a broadcast vibe.

In this tutorial, we’ll show you how to add audio to iMovie via different methods. Here we go.

If you want to add audio to video via your android phone , check this out.

Part 1. How to Add Audio to iMovie on iPhone/iPad?

Step #1. In your iMovie project, tap the ADD MEDIA (+ Symbol) button.

Step #2. Then, choose AUDIO.

You will now be given three options. Soundtracks, My Music, and Songs in iCloud. Make your choice.

To listen to a soundtrack, tap it. If a soundtrack is muted, press it to download it first, and then hit it again to preview it.

Step #3. To add a soundtrack to your project, hit the Add Audio icon next to it. iMovie will automatically insert the music at the beginning of the project and adjust it to match the duration of the project.

Adding sound effects

When you add a sound effect, it is linked to the video clip above it in the timeline. When you move the video clip, the sound effect moves with it. This differs from soundtracks, which are separate from the video segments in your production.

Scroll the timeline with your project open until the play head (the white vertical line) appears where you wish to add the sound effect.

To browse the built-in sound effects, press the Add Media button, then Audio, then Sound Effects.

To hear a sound effect, tap it.

Tap the Add Audio button next to the sound effect to add it.

Step #4. Adjust the volume of the clip

After you’ve added sound to your iMovie project, you may change the level of audio clips to achieve the ideal sound mix, or change the level of video clips that have sound. To change the volume of an audio or video clip, select it in the timeline, click the Volume button at the bottom of the window, and then drag the slider to raise or decrease the volume. When you completely reduce the volume of a clip, a Mute symbol displays on the clip in the timeline.

Part 2. How to Add Audio to iMovie on Mac?

iMovie for Mac comes with a library of music and sound clips that you may use in your project. In addition to sound effects such as rain and footsteps, iMovie includes audio clips such as ambiances and jingles.

Step #1. With your project open, go to the top of the browser and select Audio, followed by Sound Effects in the sidebar on the left. To access the Media Browser, you may need to click the Media Browser button.

Step #2. Hover the pointer over a jingle or sound clip in the list to preview it, and then click the play button next to the sound clip. You may also preview a song or sound clip by selecting it, clicking on the waveform at the top of the media browser, and then pressing the Spacebar.

Step #3. Drag jingles or other audio clips to the music well, represented by the musical note icon in the timeline, to create background music for your film. The video clips in the timeline have no effect on the audio in the music well.

Step #4. To add music or sound effects to a video clip, drag it under the video clip until a bar linking the clips appears. When you move the connected video clip, the audio follows.

Part 3. How to Add Audio to iMovie from iTunes?

If you want to add songs such as M4P music and Apple Music from iTunes to iMovie but discover that all of the music is protected, all you need is the Sidify Apple Music Converter. Sidify Apple Music Converter enables you to download music without quality loss. One of Sidify’s distinctive advantages is its ability to remove protection at an extremely quick rate – up to 20 times faster than any other similar program. The software’s user interface is straightforward. The program is simple to use even for inexperienced users. In this section, we’ll teach you how to add M4P music and Apple Music to an iMovie project as background music.

What you’ll need:

• A Mac or Windows computer running macOS or Windows OS
• The most recent version of iTunes
• Sidify Apple Music Converter is available
• Sidify Apple Music Converter can now play Apple Music

Launch Sidify Apple Music Converter, click the + button, and all the tunes you’ve downloaded from Apple Music will appear in the adding music window, as seen below. Select the song to be converted and click OK.

Step 1. Select a file type

A setting window would appear after clicking the setting button or the little gear icon on the upper right of the Sidify interface. You may select an output format such as MP3, M4A, WAV, FLAC, or AIFF, as well as a conversion speed of up to 10X and an output quality of up to 320 Kbps. Furthermore, the output path can be changed if necessary.

Step 2. Begin the conversion

Once all of the files have been added to the queue and all of the settings have been completed, click the Convert button.

Step 3. Find the best-converted music files for iMovie

Now, on your Mac computer, click the Menu button to locate the converted iTunes Music files in the target folder. The music may then be readily added to an iMovie project just like any other standard audio file.

Part 4. How to Add Audio to iMovie from Spotify?

Offline playback is possible with a Spotify Premium membership. You may save songs, playlists, or albums to listen to later. The essential element to remember is that Spotify music, whether online or offline, can only be accessed through the Spotify application. To put it another way, you do not have permission to import Spotify music into other third-party software programs. It comes with iMovie and other video editing software.

Step #1. Import music from Spotify into AudFree. The AudFree Spotify converter must be compatible with the Spotify app. When you run AudFree program from your computer’s desktop, Spotify will immediately load. You may now begin to uncover preferred Spotify tunes to add to iMovie. Import them into AudFree by copying and pasting or dragging and dropping.

Step #2. Set the output format and other preferences for iMovie. MP3, WAV, M4A, and AIFF are all supported by iMovie. You may go to the top menu and select ‘Preferences’ > ‘Convert’. A setting window will appear. You may select one of the iMovie-supported audio formats as the output format in the window. You can also change the output parameters.

Step #3. Spotify tracks may be converted for use in iMovie. To begin the download, click the ‘Convert’ button in the bottom-right corner of the main screen. AudFree program will download Spotify music to target iMovie files at up to 5X quicker speeds. You should disable your antivirus or firewall to make the converting process more stable.

Part 5. The Best Alternative to iMovie on Mac

Although iMovie has the amazing features anyone could wish to work with when crafting an interesting content, it has been seen to be limited in some ways. This is why Wondershare Filmora is the best alternative to iMovie. Filmora allows you to swiftly adjust audio effects and edit sound, ensuring that your demands are met.

Wrap Up

iMovie is an essential video editing tool, and that’s all there is to do when it comes to adding audio to iMovie videos.

iMovie, on the other hand, is limited if you want to test out new capabilities like editing films with amazing effects. This is where Filmora may come in handy in such cases.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

A Soundtrack Journey: Unveiling 10 Key Spots to Get Your Digital Music

Starting with good news for music lovers. Like stock images and stock videos, the background music also has a license for downloading. Let’s talk a little about free music before jumping on to different BGM music sites. There are two different types of free music. One where you can use the music without for any purpose. The music is not restricted to copyright; it’s known as ‘Public Domain.’

The other type is ‘Royalty-free Music,’ which allows the purchaser to pay for the music license only once. Along with these, another license is ‘Creative Common License.’ With this type of license, you can easily download and share music tracks for free. Now that you know a little about free music let’s move on and discuss popular sites for BGM mp3 download.

Part 1: Top 10 Sites to Download BGM Music for Videos

We are not always connected to the internet. Suppose you want to listen to songs, but sadly you don’t have internet connectivity. What are you going to do in such a situation? The best suggestion to avoid such problems is to download your favorite music. The following section of this article will share 10 sites to download BGM songs.

1. Jamendo

The first site that we are going to talk about is Jamendo. The site offers two platforms; Music and Licensing. With Jamendo Music, you can do free downloading and free streaming. All the songs under Jamendo Music have a Creative Commons License.

On the other hand, if we talk about Jamendo Licensing, it offers royalty-free music. This type of music is best for commercial use. Jamendo is an open community. It has a variety of free BGM music in almost all genres. A magical thing about Jamendo is that it’s not just for free downloading. You can also upload and share your music with this platform.

2. Bensound

The following site on the list for background BGM download is Bensound. This is the home for thousands of royalty-free music. The price range for Bensound is free. The homepage of Bensound is very inviting. You can easily find your desired music from Bensound. This is because it has easy-to-use search functionality.

It has a wide range of genres. All the songs are displayed on Bensound with names, interesting thumbnails, and descriptions. The majority of the clips on Bensound are offered through an attribution no-derivative CC License. This license means that you can use free background music as long as you credit the site.

3. BeatPick

Moving on to discuss another site. It is ‘BeatPick,’ the site with music with a Creative Commons License. BeatPick is known as a compelling site. It is an online music search engine. You know what? If you plan to add killer beats to your videos, check BeatPick. You will indeed find the best BGM music for your video.

With BeatPick, you can create your ‘Beatlist.’ You can add your favorite background music to your Beatlist for later use. You can also download your desired background tracks. One thing to keep in mind is that BeatPick has primarily instrumental tracks. So, if you are looking for piano BGM music, then head over to BeatPick.

4. SoundCloud

In today’s world, no one is new to SoundCloud. Let us state a fact here that SoundCloud is the world’s largest open audio platform. It has a community of listeners as well as creators. All the music on SoundCloud is protected under the Creative Commons License. You can use free BGM music under this license. This is why its price range is free.

Working with SoundCloud is very convenient. It helps you narrow your search by using various available tags. Not just this, but you can also do streaming with SoundCloud. It gives you a platform to share your music and has confidence in yourself.

5. Thematic

The next popular site for downloading cool BGM songs is Thematic. The site has copyright-free music. You can find suitable music for your videos that matches the video theme. The platform has free songs that musicians and artists establish.

Using Thematic is not at all difficult. You have to become a member of it. As soon as you become a member, you will see its complete music catalog. It has a variety of music from various known artists. You can easily use Thematic by following its simple rules.

6. ccMixter

Up next is the ccMixter in line. This is a collaborative platform for musicians. On ccMixter, firstly, singers upload their vocals. Then musicians share samples. Lastly, DJs mix them to create stunning songs. All the songs on ccMixter are under Creative Commons License. Its price range is free but with attribution.

Hence, you are free to use the music as long as you give credit to the artist. ccMixter offers you Instrumental Music, Free Music for Commercials and Video Games. Do you know that ccMixter has a tag search? This narrows your search process and saves time. A fact about ccMixter is that it has been used in over 1 million games and videos.

7. YouTube Audio Library

YouTube was created in 2005. Today, it is the most used site with billions of videos. Do you know YouTube has an Audio Library? It has free songs available in its massive library. The songs in this library are protected under the Creative Commons License, and some are Public Domain. They are free to use.

The songs in this library are grouped according to their genre, duration, mood, etc. You can use filters to speed up your search process. With the YouTube Audio library, you can listen and download without limits.

8. Free Music Archive

The next popular site is Free Music Archive. Let’s start, shall we? This site is commonly known as FMA. Free Music Archive is very popular because it is one of the most extensive selection platforms for free BGM music. Some of its songs are protected by Creative Commons License. Whereas some are from Public Domain. The price range for FMA is free.

This online site is impressive to get background music for all videos. Are you interested in knowing the best thing about FMA? It has over 1500 Public Domain tracks that are for commercial use. Not just this, but it has thousands of tracks under the Creative Commons license.

9. Incompetech

Jumping on to the next site. This is Incompetech. Kevin Macleod, an American composer, created the site. Macleod is known for his work. He composed thousands of songs and sound effects for free use. Incompetech is considered the best platform for royalty-free music.

The interface of Incompetech is straightforward. You can easily understand it and search for your background music. The site offers a wide range of backgrounds like horror, BGM, comedy, etc.

10. StoryBlocks

The last site to be discussed is StoryBlocks. This is another brilliant platform to get royalty-free music. You have to subscribe to StoryBlocks. This opens your gateway to download hundreds of free sound effects.

Let us tell you the coolest thing about StoryBlocks. You can specify the length of the track you are looking for. This is done by using its slide bar. This feature has made the search process so easy in StoryBlocks.

Bottom Line

Looking for suitable BGM music for your video is not easy. The task consumes your time as well as your energy. All your problems are over once you read this article. We have shared the 10 best and popular sites to download background music. You can take help from these sites and download free BGM for your videos.

Also read: