The Quintessential Free MP3 Amplitude Adjusters Guide

When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!

So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.

With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.

Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.

As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!

So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.

Wondershare Filmora X

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

10 Prime Pages to Acquire Digital Ding Tone Files with Hassle-Free Downloads (2023 Guide)

10 Best Websites to Download Ding Sound Effect Easily

Benjamin Arango

Mar 27, 2024• Proven solutions

The ding sounds are free to use sounds licensed under the Creative Commons. They are common to use on videos and movies. You can use the ding sound effect as a doorbell, a phone ringer, or maybe some cartoon effects.

In this article, you will learn the 10 best websites to download ding sound effect.

10 Places to Download Ding Sound Effect

1. Myinstants

At Myinstants, the ding sound effect download is simple and free. Just click on Categories and enter the sounds page where you can find several sound effects.

Click on Memes from the sounds option and then Ding sound effect. You may directly search for the Ding sound effect by typing it on the search bar.

When you enter the ding sound effect page, you can find a big red button and 3 options for social sharing and one link.

You can copy the link and embed it to your site, download ding sound effect mp3, or add to your soundboard to use the ding sound effect free in your videos.

2. Partners in Rhyme

Partners in Rhyme is a royalty-free music and sound effect download site. You may download both mp3 and WAV files for free or save the ding sound effect to Dropbox.

You can return to the Free Sound Effect homepage anytime you want from the link mentioned at the end of the page.

Apart from the elevator ding sound effect, you can also scroll Previous and Next to listen or download other sound effects.

3. Soundcloud

There are over 500 ding sound effect tracks on Soundcloud. You may create your Soundcloud account to download the ding sound effect or listen to the track and share it even without logging in to your account.

4. Clyp

Clyp is an amazing site for sharing, embedding, uploading, and downloading soundtracks. Get the direct link for ding sound effect download from Clyp.

You may also embed widget code or share it on the social platforms directly. No need to log in or register on the website in order to download ding sound effect. It is completely free to save and download.

5. InstrumentalFx

From movie soundtracks to beats, InstrumentalFx is one of the best free ding sound effect download websites where you can find it all.

Under the Royal free Music category, click on the Sound effect to search the Ding Sound effect. You can easily download ding sound effect mp3 file for free from the Instrumentalfx website. No registration or download is needed to download the ding soundtrack.

6. Peal

Does your video need a perfect bell ding sound effect? Peal offers one of the best ding sound effects that you can download by copying the Peal or the Download link. You may like it or share it on Twitter. It is created by James Doughty.

7. Free Sounds Library

Free Sounds Library offers cool ding sound effects to use it in your projects completely free. You can choose from a wide variety of tracks available on Free Sounds Library to give an awesome and perfect sound to your video.

You can play, listen, share, and download the ding sound effect mp3 for free. It is licensed under Attribution 4.0 International (CC BY 4.0). It can be used for both commercial and non-commercial purposes.

8. FindSounds

Search for stereo only or high-fidelity only ding sound effects. There are 64 ding sound effects mp3 files that you can listen to and download. From phone ring to elevator ding and bell ding sound effect, you can find it all in the Find Sounds website.

9. Freesound

Freesound offers several ding sound-related tags. You just need to click on the best tag that suits your project. You can see a list of sound effects opens up that is similar to the tag.

For instance, if you click on the tag windchime, several tracks that are close to the ding sound of a chime open up.

You need to listen to it to decide the right track and copy the URL to share it on the social platforms. For downloading the ding sound effect, you need to register and login to the website.

10. Sound Snap

The Sound Snap website has a library that you can browse to search for the perfect ding sound effect that your project needs. There are 431 ding sound effects that you may listen to and share but for downloading both mp3 and WAV files, you need to register and login to the site. In total, the library consists of 2496 sound effects.

Conclusion

If you are a budding amateur video maker or YouTuber, the free ding sound effects are the best options to choose from. Make the best and the perfect choice from the list of websites offering free ding sound effects to do complete justice to your videos.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The ding sounds are free to use sounds licensed under the Creative Commons. They are common to use on videos and movies. You can use the ding sound effect as a doorbell, a phone ringer, or maybe some cartoon effects.

In this article, you will learn the 10 best websites to download ding sound effect.

10 Places to Download Ding Sound Effect

1. Myinstants

At Myinstants, the ding sound effect download is simple and free. Just click on Categories and enter the sounds page where you can find several sound effects.

Click on Memes from the sounds option and then Ding sound effect. You may directly search for the Ding sound effect by typing it on the search bar.

When you enter the ding sound effect page, you can find a big red button and 3 options for social sharing and one link.

You can copy the link and embed it to your site, download ding sound effect mp3, or add to your soundboard to use the ding sound effect free in your videos.

2. Partners in Rhyme

Partners in Rhyme is a royalty-free music and sound effect download site. You may download both mp3 and WAV files for free or save the ding sound effect to Dropbox.

You can return to the Free Sound Effect homepage anytime you want from the link mentioned at the end of the page.

Apart from the elevator ding sound effect, you can also scroll Previous and Next to listen or download other sound effects.

3. Soundcloud

There are over 500 ding sound effect tracks on Soundcloud. You may create your Soundcloud account to download the ding sound effect or listen to the track and share it even without logging in to your account.

4. Clyp

Clyp is an amazing site for sharing, embedding, uploading, and downloading soundtracks. Get the direct link for ding sound effect download from Clyp.

You may also embed widget code or share it on the social platforms directly. No need to log in or register on the website in order to download ding sound effect. It is completely free to save and download.

5. InstrumentalFx

From movie soundtracks to beats, InstrumentalFx is one of the best free ding sound effect download websites where you can find it all.

Under the Royal free Music category, click on the Sound effect to search the Ding Sound effect. You can easily download ding sound effect mp3 file for free from the Instrumentalfx website. No registration or download is needed to download the ding soundtrack.

6. Peal

Does your video need a perfect bell ding sound effect? Peal offers one of the best ding sound effects that you can download by copying the Peal or the Download link. You may like it or share it on Twitter. It is created by James Doughty.

7. Free Sounds Library

Free Sounds Library offers cool ding sound effects to use it in your projects completely free. You can choose from a wide variety of tracks available on Free Sounds Library to give an awesome and perfect sound to your video.

You can play, listen, share, and download the ding sound effect mp3 for free. It is licensed under Attribution 4.0 International (CC BY 4.0). It can be used for both commercial and non-commercial purposes.

8. FindSounds

Search for stereo only or high-fidelity only ding sound effects. There are 64 ding sound effects mp3 files that you can listen to and download. From phone ring to elevator ding and bell ding sound effect, you can find it all in the Find Sounds website.

9. Freesound

Freesound offers several ding sound-related tags. You just need to click on the best tag that suits your project. You can see a list of sound effects opens up that is similar to the tag.

For instance, if you click on the tag windchime, several tracks that are close to the ding sound of a chime open up.

You need to listen to it to decide the right track and copy the URL to share it on the social platforms. For downloading the ding sound effect, you need to register and login to the website.

10. Sound Snap

The Sound Snap website has a library that you can browse to search for the perfect ding sound effect that your project needs. There are 431 ding sound effects that you may listen to and share but for downloading both mp3 and WAV files, you need to register and login to the site. In total, the library consists of 2496 sound effects.

Conclusion

If you are a budding amateur video maker or YouTuber, the free ding sound effects are the best options to choose from. Make the best and the perfect choice from the list of websites offering free ding sound effects to do complete justice to your videos.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The ding sounds are free to use sounds licensed under the Creative Commons. They are common to use on videos and movies. You can use the ding sound effect as a doorbell, a phone ringer, or maybe some cartoon effects.

In this article, you will learn the 10 best websites to download ding sound effect.

10 Places to Download Ding Sound Effect

1. Myinstants

At Myinstants, the ding sound effect download is simple and free. Just click on Categories and enter the sounds page where you can find several sound effects.

Click on Memes from the sounds option and then Ding sound effect. You may directly search for the Ding sound effect by typing it on the search bar.

When you enter the ding sound effect page, you can find a big red button and 3 options for social sharing and one link.

You can copy the link and embed it to your site, download ding sound effect mp3, or add to your soundboard to use the ding sound effect free in your videos.

2. Partners in Rhyme

Partners in Rhyme is a royalty-free music and sound effect download site. You may download both mp3 and WAV files for free or save the ding sound effect to Dropbox.

You can return to the Free Sound Effect homepage anytime you want from the link mentioned at the end of the page.

Apart from the elevator ding sound effect, you can also scroll Previous and Next to listen or download other sound effects.

3. Soundcloud

There are over 500 ding sound effect tracks on Soundcloud. You may create your Soundcloud account to download the ding sound effect or listen to the track and share it even without logging in to your account.

4. Clyp

Clyp is an amazing site for sharing, embedding, uploading, and downloading soundtracks. Get the direct link for ding sound effect download from Clyp.

You may also embed widget code or share it on the social platforms directly. No need to log in or register on the website in order to download ding sound effect. It is completely free to save and download.

5. InstrumentalFx

From movie soundtracks to beats, InstrumentalFx is one of the best free ding sound effect download websites where you can find it all.

Under the Royal free Music category, click on the Sound effect to search the Ding Sound effect. You can easily download ding sound effect mp3 file for free from the Instrumentalfx website. No registration or download is needed to download the ding soundtrack.

6. Peal

Does your video need a perfect bell ding sound effect? Peal offers one of the best ding sound effects that you can download by copying the Peal or the Download link. You may like it or share it on Twitter. It is created by James Doughty.

7. Free Sounds Library

Free Sounds Library offers cool ding sound effects to use it in your projects completely free. You can choose from a wide variety of tracks available on Free Sounds Library to give an awesome and perfect sound to your video.

You can play, listen, share, and download the ding sound effect mp3 for free. It is licensed under Attribution 4.0 International (CC BY 4.0). It can be used for both commercial and non-commercial purposes.

8. FindSounds

Search for stereo only or high-fidelity only ding sound effects. There are 64 ding sound effects mp3 files that you can listen to and download. From phone ring to elevator ding and bell ding sound effect, you can find it all in the Find Sounds website.

9. Freesound

Freesound offers several ding sound-related tags. You just need to click on the best tag that suits your project. You can see a list of sound effects opens up that is similar to the tag.

For instance, if you click on the tag windchime, several tracks that are close to the ding sound of a chime open up.

You need to listen to it to decide the right track and copy the URL to share it on the social platforms. For downloading the ding sound effect, you need to register and login to the website.

10. Sound Snap

The Sound Snap website has a library that you can browse to search for the perfect ding sound effect that your project needs. There are 431 ding sound effects that you may listen to and share but for downloading both mp3 and WAV files, you need to register and login to the site. In total, the library consists of 2496 sound effects.

Conclusion

If you are a budding amateur video maker or YouTuber, the free ding sound effects are the best options to choose from. Make the best and the perfect choice from the list of websites offering free ding sound effects to do complete justice to your videos.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The ding sounds are free to use sounds licensed under the Creative Commons. They are common to use on videos and movies. You can use the ding sound effect as a doorbell, a phone ringer, or maybe some cartoon effects.

In this article, you will learn the 10 best websites to download ding sound effect.

10 Places to Download Ding Sound Effect

1. Myinstants

At Myinstants, the ding sound effect download is simple and free. Just click on Categories and enter the sounds page where you can find several sound effects.

Click on Memes from the sounds option and then Ding sound effect. You may directly search for the Ding sound effect by typing it on the search bar.

When you enter the ding sound effect page, you can find a big red button and 3 options for social sharing and one link.

You can copy the link and embed it to your site, download ding sound effect mp3, or add to your soundboard to use the ding sound effect free in your videos.

2. Partners in Rhyme

Partners in Rhyme is a royalty-free music and sound effect download site. You may download both mp3 and WAV files for free or save the ding sound effect to Dropbox.

You can return to the Free Sound Effect homepage anytime you want from the link mentioned at the end of the page.

Apart from the elevator ding sound effect, you can also scroll Previous and Next to listen or download other sound effects.

3. Soundcloud

There are over 500 ding sound effect tracks on Soundcloud. You may create your Soundcloud account to download the ding sound effect or listen to the track and share it even without logging in to your account.

4. Clyp

Clyp is an amazing site for sharing, embedding, uploading, and downloading soundtracks. Get the direct link for ding sound effect download from Clyp.

You may also embed widget code or share it on the social platforms directly. No need to log in or register on the website in order to download ding sound effect. It is completely free to save and download.

5. InstrumentalFx

From movie soundtracks to beats, InstrumentalFx is one of the best free ding sound effect download websites where you can find it all.

Under the Royal free Music category, click on the Sound effect to search the Ding Sound effect. You can easily download ding sound effect mp3 file for free from the Instrumentalfx website. No registration or download is needed to download the ding soundtrack.

6. Peal

Does your video need a perfect bell ding sound effect? Peal offers one of the best ding sound effects that you can download by copying the Peal or the Download link. You may like it or share it on Twitter. It is created by James Doughty.

7. Free Sounds Library

Free Sounds Library offers cool ding sound effects to use it in your projects completely free. You can choose from a wide variety of tracks available on Free Sounds Library to give an awesome and perfect sound to your video.

You can play, listen, share, and download the ding sound effect mp3 for free. It is licensed under Attribution 4.0 International (CC BY 4.0). It can be used for both commercial and non-commercial purposes.

8. FindSounds

Search for stereo only or high-fidelity only ding sound effects. There are 64 ding sound effects mp3 files that you can listen to and download. From phone ring to elevator ding and bell ding sound effect, you can find it all in the Find Sounds website.

9. Freesound

Freesound offers several ding sound-related tags. You just need to click on the best tag that suits your project. You can see a list of sound effects opens up that is similar to the tag.

For instance, if you click on the tag windchime, several tracks that are close to the ding sound of a chime open up.

You need to listen to it to decide the right track and copy the URL to share it on the social platforms. For downloading the ding sound effect, you need to register and login to the website.

10. Sound Snap

The Sound Snap website has a library that you can browse to search for the perfect ding sound effect that your project needs. There are 431 ding sound effects that you may listen to and share but for downloading both mp3 and WAV files, you need to register and login to the site. In total, the library consists of 2496 sound effects.

Conclusion

If you are a budding amateur video maker or YouTuber, the free ding sound effects are the best options to choose from. Make the best and the perfect choice from the list of websites offering free ding sound effects to do complete justice to your videos.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

How to Change Audio Speed Easily and Quickly?

If you have a music file, and you notice that it is a bit slow or fast, making the entire ambiance kind of dull or overly exciting respectively, you can change audio speed to get the track right as per your mood. However, when you make any such adjustments, some unwanted effects can be experienced, such as format limitations while exporting, changes in the pitch of the sound, etc.

That said, here, you will learn how to change audio speed with the least adverse effects using some of the most popular and highly recommended tools.

How to Change Audio Speed in Filmora

Being a lightweight and less resource-intensive post-production tool, Filmora is admired by several professionals across the globe and is many times preferred over other editing programs like Adobe Premiere Pro and Final Cut Pro X. Easy-to-understand UI and large-sized, clearly visible options and buttons are what make Filmora extremely popular among those who are new to the industry and don’t have a computer with a powerful processor, gigantic memory, and enormous GPU.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

You can follow the steps given below to learn how to change audio speed with Wondershare Filmora:

Step 1: Import Audio and Add to Filmora Timeline

Launch Filmora on your Windows or Mac computer, make sure that the Media icon is selected from the standard toolbar at the top, click the + icon in the Media (also referred to as Library here) window (on Mac) or anywhere in the Media window itself (on Windows) from the upper-left corner of the interface, and import the audio file that you want to manage the playback speed of. Next, drag the media file from the Library to the timeline.

Step 2: Increase or Decrease Audio Speed

Ensure that the audio track is selected in the timeline. Click the Speedometer icon from the timeline toolbar at the upper section, hover mouse to the Slow option from the menu, and click your preferred value form the submenu to reduce the sound speed. Likewise, hover the mouse to the Fast option, and choose a value from the submenu to increase it.

Note: Usually, the audio pitch wouldn’t change as long as you pick the values anywhere between 0.5x and 5x. However, if you select any option beyond this range, you may experience variations in the pitch according the value you selected.

Step 3: Set Custom Speed or Reverse the Audio

Click the Speedometer icon from above the timeline, and click Custom Speed from the menu. Use the slider to slow down (move to the left) or speed up (move to the right) the audio on the Custom Speed box. Alternatively, you can manually enter your preferred value in the available field for granular control. In addition, you can also check the Reverse Speed box to reverse the audio if need be.

Step 4: Export the Output

Click EXPORT from the top-center area of the interface, go to the Local tab on the Export box that opens next, select your preferred audio format from the Format list in the left, make necessary customizations from the right pane, and click EXPORT from the bottom-right corner of the box to export the audio with the modified speed.

How to Change the Speed of Audio with Video in Filmora

The process to change audio speed that also has a video is identical to what is explained in the previous section. The only additional step required in this case is separating the audio track from that of video.

You can learn how to get this done by following the instructions given below:

Step 1: Import File to Media Window and then Add to Timeline

Use the method explained in Step 1 of the previous section to import a file to Filmora, drag the media to the timeline, and click MATCH TO MEDIA when the Project Setting box appears and prompts for confirmation. Note: Except for the Project Setting box, the rest of the process for adding audio and video files to the timeline is the same.

Step 2: Separate Audio from Video

Select and then right-click the video track with audio in the timeline, and click Detach Audio from the context menu.

Step 3: Adjust the Audio Speed

After the audio is detached, you can select the audio track and follow the method explained in the previous section to adjust its speed as needed. As for the video, you can use the trimming and cropping options to adjust its duration and size and export the entire project as explained in Step 4 of the previous section. Note: To export the project as video, all you need to do is, choose a video format like MP4 or something similar to that when on the Export box.

How to Change Audio Speed without Changing Pitch in Audacity for Free

One of the most downloaded, used, and admired applications, Audacity, is an open-source and free audio editing software available for Windows, Mac, and Linux computers in both x32 and x64 variants. The software has all the professionals’ tools for basic to advanced sound editing to produce industry-standard outputs.

You can follow the steps given below to learn how to change audio speed with Audacity without changing the pitch of the sound:

• Launch Audacity
• Click File
• Go to Import > Audio

• Import the audio you want to speed up or slow down
• Press Ctrl + A on the keyboard to select the whole audio track
• Go to the Effect menu
• Click Change Tempo

• In the Percent Change field, enter a value with or without minus (-) to reduce or increase the tempo of the audio respectively.

• Click OK
• Go to file> Export
• Select your preferred option from the submenu to export the modified audio as needed

Note: Changing the tempo usually doesn’t change the pitch of the audio up to some extent. However, you can expect some variations in the pitch if the new tempo value is too high or too low.

Conclusion

You may want to slow down or speed up audio if the existing one is not up to the mark, and you wish to manage the ambiance with the help of the music track either while playing a video or when merely a soundtrack is to be played during some event. In either case, the best tool for all your needs is Wondershare Filmora, and if you are looking for a program dedicated to audio only, Audacity is something worth trying.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

You can follow the steps given below to learn how to change audio speed with Wondershare Filmora:

Step 1: Import Audio and Add to Filmora Timeline

Launch Filmora on your Windows or Mac computer, make sure that the Media icon is selected from the standard toolbar at the top, click the + icon in the Media (also referred to as Library here) window (on Mac) or anywhere in the Media window itself (on Windows) from the upper-left corner of the interface, and import the audio file that you want to manage the playback speed of. Next, drag the media file from the Library to the timeline.

Step 2: Increase or Decrease Audio Speed

Ensure that the audio track is selected in the timeline. Click the Speedometer icon from the timeline toolbar at the upper section, hover mouse to the Slow option from the menu, and click your preferred value form the submenu to reduce the sound speed. Likewise, hover the mouse to the Fast option, and choose a value from the submenu to increase it.

Note: Usually, the audio pitch wouldn’t change as long as you pick the values anywhere between 0.5x and 5x. However, if you select any option beyond this range, you may experience variations in the pitch according the value you selected.

Step 3: Set Custom Speed or Reverse the Audio

Click the Speedometer icon from above the timeline, and click Custom Speed from the menu. Use the slider to slow down (move to the left) or speed up (move to the right) the audio on the Custom Speed box. Alternatively, you can manually enter your preferred value in the available field for granular control. In addition, you can also check the Reverse Speed box to reverse the audio if need be.

Step 4: Export the Output

Click EXPORT from the top-center area of the interface, go to the Local tab on the Export box that opens next, select your preferred audio format from the Format list in the left, make necessary customizations from the right pane, and click EXPORT from the bottom-right corner of the box to export the audio with the modified speed.

How to Change the Speed of Audio with Video in Filmora

The process to change audio speed that also has a video is identical to what is explained in the previous section. The only additional step required in this case is separating the audio track from that of video.

You can learn how to get this done by following the instructions given below:

Step 1: Import File to Media Window and then Add to Timeline

Use the method explained in Step 1 of the previous section to import a file to Filmora, drag the media to the timeline, and click MATCH TO MEDIA when the Project Setting box appears and prompts for confirmation. Note: Except for the Project Setting box, the rest of the process for adding audio and video files to the timeline is the same.

Step 2: Separate Audio from Video

Select and then right-click the video track with audio in the timeline, and click Detach Audio from the context menu.

Step 3: Adjust the Audio Speed

After the audio is detached, you can select the audio track and follow the method explained in the previous section to adjust its speed as needed. As for the video, you can use the trimming and cropping options to adjust its duration and size and export the entire project as explained in Step 4 of the previous section. Note: To export the project as video, all you need to do is, choose a video format like MP4 or something similar to that when on the Export box.

How to Change Audio Speed without Changing Pitch in Audacity for Free

One of the most downloaded, used, and admired applications, Audacity, is an open-source and free audio editing software available for Windows, Mac, and Linux computers in both x32 and x64 variants. The software has all the professionals’ tools for basic to advanced sound editing to produce industry-standard outputs.

You can follow the steps given below to learn how to change audio speed with Audacity without changing the pitch of the sound:

• Launch Audacity
• Click File
• Go to Import > Audio

• Import the audio you want to speed up or slow down
• Press Ctrl + A on the keyboard to select the whole audio track
• Go to the Effect menu
• Click Change Tempo

• In the Percent Change field, enter a value with or without minus (-) to reduce or increase the tempo of the audio respectively.

• Click OK
• Go to file> Export
• Select your preferred option from the submenu to export the modified audio as needed

Note: Changing the tempo usually doesn’t change the pitch of the audio up to some extent. However, you can expect some variations in the pitch if the new tempo value is too high or too low.

Conclusion

You may want to slow down or speed up audio if the existing one is not up to the mark, and you wish to manage the ambiance with the help of the music track either while playing a video or when merely a soundtrack is to be played during some event. In either case, the best tool for all your needs is Wondershare Filmora, and if you are looking for a program dedicated to audio only, Audacity is something worth trying.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

You can follow the steps given below to learn how to change audio speed with Wondershare Filmora:

Step 1: Import Audio and Add to Filmora Timeline

Launch Filmora on your Windows or Mac computer, make sure that the Media icon is selected from the standard toolbar at the top, click the + icon in the Media (also referred to as Library here) window (on Mac) or anywhere in the Media window itself (on Windows) from the upper-left corner of the interface, and import the audio file that you want to manage the playback speed of. Next, drag the media file from the Library to the timeline.

Step 2: Increase or Decrease Audio Speed

Ensure that the audio track is selected in the timeline. Click the Speedometer icon from the timeline toolbar at the upper section, hover mouse to the Slow option from the menu, and click your preferred value form the submenu to reduce the sound speed. Likewise, hover the mouse to the Fast option, and choose a value from the submenu to increase it.

Note: Usually, the audio pitch wouldn’t change as long as you pick the values anywhere between 0.5x and 5x. However, if you select any option beyond this range, you may experience variations in the pitch according the value you selected.

Step 3: Set Custom Speed or Reverse the Audio

Click the Speedometer icon from above the timeline, and click Custom Speed from the menu. Use the slider to slow down (move to the left) or speed up (move to the right) the audio on the Custom Speed box. Alternatively, you can manually enter your preferred value in the available field for granular control. In addition, you can also check the Reverse Speed box to reverse the audio if need be.

Step 4: Export the Output

Click EXPORT from the top-center area of the interface, go to the Local tab on the Export box that opens next, select your preferred audio format from the Format list in the left, make necessary customizations from the right pane, and click EXPORT from the bottom-right corner of the box to export the audio with the modified speed.

How to Change the Speed of Audio with Video in Filmora

The process to change audio speed that also has a video is identical to what is explained in the previous section. The only additional step required in this case is separating the audio track from that of video.

You can learn how to get this done by following the instructions given below:

Step 1: Import File to Media Window and then Add to Timeline

Use the method explained in Step 1 of the previous section to import a file to Filmora, drag the media to the timeline, and click MATCH TO MEDIA when the Project Setting box appears and prompts for confirmation. Note: Except for the Project Setting box, the rest of the process for adding audio and video files to the timeline is the same.

Step 2: Separate Audio from Video

Select and then right-click the video track with audio in the timeline, and click Detach Audio from the context menu.

Step 3: Adjust the Audio Speed

After the audio is detached, you can select the audio track and follow the method explained in the previous section to adjust its speed as needed. As for the video, you can use the trimming and cropping options to adjust its duration and size and export the entire project as explained in Step 4 of the previous section. Note: To export the project as video, all you need to do is, choose a video format like MP4 or something similar to that when on the Export box.

How to Change Audio Speed without Changing Pitch in Audacity for Free

One of the most downloaded, used, and admired applications, Audacity, is an open-source and free audio editing software available for Windows, Mac, and Linux computers in both x32 and x64 variants. The software has all the professionals’ tools for basic to advanced sound editing to produce industry-standard outputs.

You can follow the steps given below to learn how to change audio speed with Audacity without changing the pitch of the sound:

• Launch Audacity
• Click File
• Go to Import > Audio

• Import the audio you want to speed up or slow down
• Press Ctrl + A on the keyboard to select the whole audio track
• Go to the Effect menu
• Click Change Tempo

• In the Percent Change field, enter a value with or without minus (-) to reduce or increase the tempo of the audio respectively.

• Click OK
• Go to file> Export
• Select your preferred option from the submenu to export the modified audio as needed

Note: Changing the tempo usually doesn’t change the pitch of the audio up to some extent. However, you can expect some variations in the pitch if the new tempo value is too high or too low.

Conclusion

You may want to slow down or speed up audio if the existing one is not up to the mark, and you wish to manage the ambiance with the help of the music track either while playing a video or when merely a soundtrack is to be played during some event. In either case, the best tool for all your needs is Wondershare Filmora, and if you are looking for a program dedicated to audio only, Audacity is something worth trying.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

You can follow the steps given below to learn how to change audio speed with Wondershare Filmora:

Step 1: Import Audio and Add to Filmora Timeline

Launch Filmora on your Windows or Mac computer, make sure that the Media icon is selected from the standard toolbar at the top, click the + icon in the Media (also referred to as Library here) window (on Mac) or anywhere in the Media window itself (on Windows) from the upper-left corner of the interface, and import the audio file that you want to manage the playback speed of. Next, drag the media file from the Library to the timeline.

Step 2: Increase or Decrease Audio Speed

Ensure that the audio track is selected in the timeline. Click the Speedometer icon from the timeline toolbar at the upper section, hover mouse to the Slow option from the menu, and click your preferred value form the submenu to reduce the sound speed. Likewise, hover the mouse to the Fast option, and choose a value from the submenu to increase it.

Note: Usually, the audio pitch wouldn’t change as long as you pick the values anywhere between 0.5x and 5x. However, if you select any option beyond this range, you may experience variations in the pitch according the value you selected.

Step 3: Set Custom Speed or Reverse the Audio

Click the Speedometer icon from above the timeline, and click Custom Speed from the menu. Use the slider to slow down (move to the left) or speed up (move to the right) the audio on the Custom Speed box. Alternatively, you can manually enter your preferred value in the available field for granular control. In addition, you can also check the Reverse Speed box to reverse the audio if need be.

Step 4: Export the Output

Click EXPORT from the top-center area of the interface, go to the Local tab on the Export box that opens next, select your preferred audio format from the Format list in the left, make necessary customizations from the right pane, and click EXPORT from the bottom-right corner of the box to export the audio with the modified speed.

How to Change the Speed of Audio with Video in Filmora

The process to change audio speed that also has a video is identical to what is explained in the previous section. The only additional step required in this case is separating the audio track from that of video.

You can learn how to get this done by following the instructions given below:

Step 1: Import File to Media Window and then Add to Timeline

Use the method explained in Step 1 of the previous section to import a file to Filmora, drag the media to the timeline, and click MATCH TO MEDIA when the Project Setting box appears and prompts for confirmation. Note: Except for the Project Setting box, the rest of the process for adding audio and video files to the timeline is the same.

Step 2: Separate Audio from Video

Select and then right-click the video track with audio in the timeline, and click Detach Audio from the context menu.

Step 3: Adjust the Audio Speed

After the audio is detached, you can select the audio track and follow the method explained in the previous section to adjust its speed as needed. As for the video, you can use the trimming and cropping options to adjust its duration and size and export the entire project as explained in Step 4 of the previous section. Note: To export the project as video, all you need to do is, choose a video format like MP4 or something similar to that when on the Export box.

How to Change Audio Speed without Changing Pitch in Audacity for Free

One of the most downloaded, used, and admired applications, Audacity, is an open-source and free audio editing software available for Windows, Mac, and Linux computers in both x32 and x64 variants. The software has all the professionals’ tools for basic to advanced sound editing to produce industry-standard outputs.

You can follow the steps given below to learn how to change audio speed with Audacity without changing the pitch of the sound:

• Launch Audacity
• Click File
• Go to Import > Audio

• Import the audio you want to speed up or slow down
• Press Ctrl + A on the keyboard to select the whole audio track
• Go to the Effect menu
• Click Change Tempo

• In the Percent Change field, enter a value with or without minus (-) to reduce or increase the tempo of the audio respectively.

• Click OK
• Go to file> Export
• Select your preferred option from the submenu to export the modified audio as needed

Note: Changing the tempo usually doesn’t change the pitch of the audio up to some extent. However, you can expect some variations in the pitch if the new tempo value is too high or too low.

Conclusion

You may want to slow down or speed up audio if the existing one is not up to the mark, and you wish to manage the ambiance with the help of the music track either while playing a video or when merely a soundtrack is to be played during some event. In either case, the best tool for all your needs is Wondershare Filmora, and if you are looking for a program dedicated to audio only, Audacity is something worth trying.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Also read: