The Pathway to Pristine Recordings: Removing Unwanted Noises for Crystal-Clear Sound

Creating content can be fun most of the time. The shoot is perfect and the scenes are spotless. You are confident that you got everything right. But then, when you listen to the recording, you notice a continuous hissing sound. This takes you back as you have to decide to remove hiss from audio before editing the video. Luckily, several hiss removal approaches will work just fine. In this article, we take you through the audio cleanup process to help you with your hiss reduction efforts.

AI Vocal Remover A cross-platform for facilitating your video editing process by offering valuable benefits!

Free Download Free Download Learn More

Part 1. Audio Hiss: What is it and Why Remove it

A hiss is a broadband noise across the audible spectrum of your audio. It becomes more intense in high frequencies, affecting the quality of the vocals and instrumentals in your audio. A hiss could sound like blue noise and is often caused by the electronic components themselves, which is referred to as self or inherent noise.

A hiss is measured by decibels and is usually difficult to avoid because it is produced by electronic components. You will usually hear the hiss as air that is getting out of a narrow passage. You may also hear a reverb, which is a sound that occurs in space and sends sound waves out in all directions. Since this is a component of the original recording, it is impossible to delete it. However, hiss reduction is possible with the right editing software.

Causes of Hiss in Audio Recordings

• Electronic components such as microphones, video cameras, and interfaces create self-noise because of the heat energy created by the moving parts
• Audio circuits generate self-noise, with the noise floor being the level of the inherent noise in the circuit
• Screening and quality of electronic components, which cheap and poorly made equipment producing more hiss
• Poor-quality audio cables contribute to hiss and hum when they are picked up during recording

Importance of Removing Hiss for a Professional Sound

Removing hiss from audio is important for a professional sound because it makes the sound clearer and polished. The polished sound leads to

• Improved clarity and focus on the main vocals or instruments in a recording sound
• A more professional and smooth sound
• Increases listener engagement
• More understandable vocals and more vibrant instrumentals

Part 2. Remove Hiss from Audio With Premiere Pro: Step-by-Step Guide

When you discover hiss or reverb sound in your recordings, you may use professional video editing software to reduce it. Audacity remove hiss is a good option when you are on a budget. However, it may take longer and require more effort to reduce hiss with the software. Another great and effective approach is to remove hiss Premiere Pro. The software removes hisses, background noises, and low ambient noises in your recording. Let’s explore the steps you need to take:

Step 1: Set Up Your Project

Once you have downloaded and installed Adobe Premiere Pro, launch it on your desktop. Import the audio files with background noise or hiss.

Go to File, then import and select the files you want from your computer. Another way is to drag and drop those files from your computer’s folder onto the Premiere Pro. Then create a new sequence by right-clicking on the files and selecting New Sequence or drag the files into the Timeline.

Step 2: Add the DeNoise Effect

Hiss removal on Premiere Pro is made possible by the denoise effect. On the Windows menu, find effects and make sure the DeNoise has a checkmark on it. All the effects available are accessible on the Effects tab from the project panel. Type DeNoise in the search box, click and drag it to the audio track, then play the audio to listen to the effect in action.

Step 3: Adjust Settings

When you add an effect to your clicks, it shows in the Effects Control panel. Adjust the custom settings of the DeNoise effect until it sounds just right. Open the Clip Fx Editor from the Custom Setup to modify the amount of DeNoise you want to apply. The Gain slider and presets allow you to make appropriate adjustments.

Step 4: Repair the Audio

Using the Essential Sound Panel, repair the audio appropriately. The panel offers tools for removing background hisses and noises affecting your recording. With those simple 4 steps, you will reduce hiss in your recording and make your audio clearer.

Part 3. Remove Hiss from Audio with Wondershare Filmora : Quick Alternative

Wondershare Filmora is a great video editing software with great audio capabilities. When removing reverb and hiss in your audio, the AI Audio DeNoise feature automates the process. Filmora combines AI algorithms, helping you to remove different kinds of background noises in video and audio files. There is also a wide range of features that make editing with Filmora a breeze. With the AI Copilot, you have a virtual friend to help you in every step of your editing journey.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Audio Denoise

Removing hiss and other background noises with Filmora is quick and easy with the AI Audio DeNoise feature. The AI DeNoise features offer several benefits that automatically improve the quality of your audio:

• Removing Background Noise Accurately: Users have three noise reduction options to use separately or combined for accurate noise reduction. The first is AI Voice Enhancement which increases the voice in low volume, removing a small amount of background noise. Then you have Reverb Reduction which reduces audio reverberation to improve the clarity of voice in reverberant environments like empty halls. The other option is Hiss Reduction which removes electrical noise from audio transmission and recording devices.
• Clean up Audio: The AI-powered feature reduces background noise easily and efficiently. Save more time editing your files while improving the audio quality.
• Meet Needs of Multiple Scenes: By reducing or removing noise from your video, the AI Audio DeNoise feature helps you produce quality videos and audio for all scenarios. You can edit the audio specifically for a podcast, an online meeting, or even online courses.

To remove hiss and reverb from audio with Filmora, follow these simple steps:

Step 1Import and Select the Audio File

Once you launch Filmora, import your audio or video files to Filmora and add them to the Timeline. Then click on the clip you want to remove the noise and the audio settings window will appear.

Step 2Adjust Audio Appropriately

Adjust the audio denoise functions to improve the quality of the audio. This includes the hiss reduction, reverb reduction, and voice enhancement. This will improve the overall quality of your audio.

Part 4. Tips and Tricks to Avoid Hiss and Reverb Noise

The problem of hissing sound and reverb noise usually comes from the equipment itself. However, some background noise may add to the problem. Making a few adjustments to the recording stage may help in reducing hiss and background noise:

• Optimize the Recording Space

The noise-producing items in your recording space may add to the hissing noise in your audio. While most of the noise may seem innocent, they may amplify themselves when listening to the recorded footage. Optimizing your space before you start, such as closing the windows and doors or turning off your electronic devices will help to reduce the noise.

• Reduce Subject-to-Microphone Distance

Keeping the microphone as close as possible to the subject will drastically improve the speech-to-noise ratio. The microphone will record more of the subject’s voice than the background noise, giving you a clearer audio output.

• Use a Microphone with Gain-Boost

An enhanced gain microphone preamp helps to reduce hiss and notice from the audio in an incredible way. Specifically, the camera’s preamplifier does not add gain because the volume setting is kept low.

• Use Directional Microphones

Usually, microphones signal outside their axis. This is often the case for cardioid polar and short gun patterns. This quality is great for reducing noise when you use directional microphones. The microphone will only focus on what you are interested in, ignoring the background noise.

• Turn Off Camera’s Auto-Gain

The AGC or Auto Gain Control feature is popular in modern cameras. It automatically adjusts the gain for low- and high-volume sounds to make them even. However, it can enhance everything for a quiet setting, causing hissing background noise. Turning the feature off gives you more control over what sounds to focus on.

• Reduce the Number of Open Microphones

Open microphones will continue recording audio even when you are not interested in that sound. Keeping this number low will help reduce hissing sound by focusing only on what you are recording.

Conclusion

Hiss and reverb background noise is an annoying problem. The unwanted sounds affect the quality of your audio and the level of engagement in your footage. While eliminating causes of hiss when recording is the best way to reduce it, sometimes you may notice when it is too late. Using the right editing software will help you reduce the noise and improve the quality of your audio. Wondershare Filmora allows you to do this with the AI Audio Denoise feature. The AI-powered feature will automatically reduce hiss noise and reverb in your clips, giving you clearer and more engaging audio.

Free Download Free Download Learn More

Part 1. Audio Hiss: What is it and Why Remove it

A hiss is a broadband noise across the audible spectrum of your audio. It becomes more intense in high frequencies, affecting the quality of the vocals and instrumentals in your audio. A hiss could sound like blue noise and is often caused by the electronic components themselves, which is referred to as self or inherent noise.

A hiss is measured by decibels and is usually difficult to avoid because it is produced by electronic components. You will usually hear the hiss as air that is getting out of a narrow passage. You may also hear a reverb, which is a sound that occurs in space and sends sound waves out in all directions. Since this is a component of the original recording, it is impossible to delete it. However, hiss reduction is possible with the right editing software.

Causes of Hiss in Audio Recordings

• Electronic components such as microphones, video cameras, and interfaces create self-noise because of the heat energy created by the moving parts
• Audio circuits generate self-noise, with the noise floor being the level of the inherent noise in the circuit
• Screening and quality of electronic components, which cheap and poorly made equipment producing more hiss
• Poor-quality audio cables contribute to hiss and hum when they are picked up during recording

Importance of Removing Hiss for a Professional Sound

Removing hiss from audio is important for a professional sound because it makes the sound clearer and polished. The polished sound leads to

• Improved clarity and focus on the main vocals or instruments in a recording sound
• A more professional and smooth sound
• Increases listener engagement
• More understandable vocals and more vibrant instrumentals

Part 2. Remove Hiss from Audio With Premiere Pro: Step-by-Step Guide

When you discover hiss or reverb sound in your recordings, you may use professional video editing software to reduce it. Audacity remove hiss is a good option when you are on a budget. However, it may take longer and require more effort to reduce hiss with the software. Another great and effective approach is to remove hiss Premiere Pro. The software removes hisses, background noises, and low ambient noises in your recording. Let’s explore the steps you need to take:

Step 1: Set Up Your Project

Once you have downloaded and installed Adobe Premiere Pro, launch it on your desktop. Import the audio files with background noise or hiss.

Go to File, then import and select the files you want from your computer. Another way is to drag and drop those files from your computer’s folder onto the Premiere Pro. Then create a new sequence by right-clicking on the files and selecting New Sequence or drag the files into the Timeline.

Step 2: Add the DeNoise Effect

Hiss removal on Premiere Pro is made possible by the denoise effect. On the Windows menu, find effects and make sure the DeNoise has a checkmark on it. All the effects available are accessible on the Effects tab from the project panel. Type DeNoise in the search box, click and drag it to the audio track, then play the audio to listen to the effect in action.

Step 3: Adjust Settings

When you add an effect to your clicks, it shows in the Effects Control panel. Adjust the custom settings of the DeNoise effect until it sounds just right. Open the Clip Fx Editor from the Custom Setup to modify the amount of DeNoise you want to apply. The Gain slider and presets allow you to make appropriate adjustments.

Step 4: Repair the Audio

Using the Essential Sound Panel, repair the audio appropriately. The panel offers tools for removing background hisses and noises affecting your recording. With those simple 4 steps, you will reduce hiss in your recording and make your audio clearer.

Part 3. Remove Hiss from Audio with Wondershare Filmora : Quick Alternative

Wondershare Filmora is a great video editing software with great audio capabilities. When removing reverb and hiss in your audio, the AI Audio DeNoise feature automates the process. Filmora combines AI algorithms, helping you to remove different kinds of background noises in video and audio files. There is also a wide range of features that make editing with Filmora a breeze. With the AI Copilot, you have a virtual friend to help you in every step of your editing journey.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Audio Denoise

Removing hiss and other background noises with Filmora is quick and easy with the AI Audio DeNoise feature. The AI DeNoise features offer several benefits that automatically improve the quality of your audio:

• Removing Background Noise Accurately: Users have three noise reduction options to use separately or combined for accurate noise reduction. The first is AI Voice Enhancement which increases the voice in low volume, removing a small amount of background noise. Then you have Reverb Reduction which reduces audio reverberation to improve the clarity of voice in reverberant environments like empty halls. The other option is Hiss Reduction which removes electrical noise from audio transmission and recording devices.
• Clean up Audio: The AI-powered feature reduces background noise easily and efficiently. Save more time editing your files while improving the audio quality.
• Meet Needs of Multiple Scenes: By reducing or removing noise from your video, the AI Audio DeNoise feature helps you produce quality videos and audio for all scenarios. You can edit the audio specifically for a podcast, an online meeting, or even online courses.

To remove hiss and reverb from audio with Filmora, follow these simple steps:

Step 1Import and Select the Audio File

Once you launch Filmora, import your audio or video files to Filmora and add them to the Timeline. Then click on the clip you want to remove the noise and the audio settings window will appear.

Step 2Adjust Audio Appropriately

Adjust the audio denoise functions to improve the quality of the audio. This includes the hiss reduction, reverb reduction, and voice enhancement. This will improve the overall quality of your audio.

Part 4. Tips and Tricks to Avoid Hiss and Reverb Noise

The problem of hissing sound and reverb noise usually comes from the equipment itself. However, some background noise may add to the problem. Making a few adjustments to the recording stage may help in reducing hiss and background noise:

• Optimize the Recording Space

The noise-producing items in your recording space may add to the hissing noise in your audio. While most of the noise may seem innocent, they may amplify themselves when listening to the recorded footage. Optimizing your space before you start, such as closing the windows and doors or turning off your electronic devices will help to reduce the noise.

• Reduce Subject-to-Microphone Distance

Keeping the microphone as close as possible to the subject will drastically improve the speech-to-noise ratio. The microphone will record more of the subject’s voice than the background noise, giving you a clearer audio output.

• Use a Microphone with Gain-Boost

An enhanced gain microphone preamp helps to reduce hiss and notice from the audio in an incredible way. Specifically, the camera’s preamplifier does not add gain because the volume setting is kept low.

• Use Directional Microphones

Usually, microphones signal outside their axis. This is often the case for cardioid polar and short gun patterns. This quality is great for reducing noise when you use directional microphones. The microphone will only focus on what you are interested in, ignoring the background noise.

• Turn Off Camera’s Auto-Gain

The AGC or Auto Gain Control feature is popular in modern cameras. It automatically adjusts the gain for low- and high-volume sounds to make them even. However, it can enhance everything for a quiet setting, causing hissing background noise. Turning the feature off gives you more control over what sounds to focus on.

• Reduce the Number of Open Microphones

Open microphones will continue recording audio even when you are not interested in that sound. Keeping this number low will help reduce hissing sound by focusing only on what you are recording.

Conclusion

Hiss and reverb background noise is an annoying problem. The unwanted sounds affect the quality of your audio and the level of engagement in your footage. While eliminating causes of hiss when recording is the best way to reduce it, sometimes you may notice when it is too late. Using the right editing software will help you reduce the noise and improve the quality of your audio. Wondershare Filmora allows you to do this with the AI Audio Denoise feature. The AI-powered feature will automatically reduce hiss noise and reverb in your clips, giving you clearer and more engaging audio.

Insert Auditory Element to iMovie Storyline

Versatile Video Editor - Wondershare Filmora

Try It Free Try It Free

“Can you add songs to iMovie? I need someone who can help me find a solution by providing a Detailed Guide on how to add songs in iMovie.”

It is a fact that iMovie is free for Apple users. There is a bit of a learning process that a user needs to go through before they start using it. It is also pertinant to understand that the simple process of adding a song to iMovie can be pretty tough if you do not understand the process.

Without delaying any further, let’s go through a quick detailed guide on how to add songs on iMovie as follows:

In this article

01 [How to add Music to iMovie [iPhone & Mac]](#Part 1)

02 [Can I use iTunes songs on iMovie](#Part 2)

03 [Where can I get free songs to add to iMovie](#Part 3)

Part 1 How to add Music to iMovie [iPhone & Mac]

iMovie provides Apple users with varieties of great opportunities, especially those who are much more interested in making videos to add transitions, cut clips, overlay titles, and do more on the platform. More so, for those using them already, you will notice that there are about five songs already, which can be somewhat overwhelming.

The good news is that Apple users can now add more songs on iMovie using the following steps:

For iPhone: there are different methods of adding songs to the iMovie project using your iPhone device:

Add theme music and soundtrack

● While your project is still open, click on Add Media button +and then click on Audio.

● Click on Soundtracks and all the Soundtracks that you need to download will appear showing a Download button next to them.

● Click on a soundtrack you want to download and download it. After you download a soundtrack, you can click on it to preview.

● To download all the soundtracks, click on the Download button in the upper right.

● To add a soundtrack, click on the soundtrack you want to add and then click on the Add Audio option + that appears to add a soundtrack to your project.

● Scroll down to the Theme Music section available at the Soundtracks list and add theme music to your project to add theme music.

Add background song stored on your device

● While your project is still open, click on Add Media button + and click on Audio.

● To look for songs previously synced to your device from your computer, click on My Music.

● To listen to a song before adding them, click on the song.

● To add a song to your iMovie project, click on the song and then click on the Add Audio button +.

Add imported songs from an iCloud drive or other audio

Scroll the timeline so the white vertical line known as the ‘Playhead’ appears while your project is still open and select where you want to add the audio clip or songs.

Note: The new clip gets added before or after an existing clip. This is if the ‘Playhead’ is resting over a current clip.

● Click on Add Media + and then click on Audio.

● Click on the iCloud Drive listed in the categories.

● Navigate to the folder with the audio you want to use, located at the iCloud pane,

● Click on the name of the audio clip or song you want to add and tap the Add Audio button +.

For Mac: There are different methods of adding songs to the iMovie project using your Mac device:

Add background Music

● Click on the iMovie app on your Mac device and open your movie in the timeline. Then select Audio located above the browser.

Source

● In the audio sidebar, select from the dropdown; Sound Effects , GarageBand , or Music

The contents found in the selected item will appear as a list in the browser. Therefore, to filter what appears as a list in the browser:

● Tap the pop-up menu at the upper-left corner and select a category.

● Look for the clip you want to add to your project in the browser.

● Drag and drop the clip to the background music well below the timeline.

You can now trim, edit, and position, the background audio independently of clips in the timeline.

Add a sound clip

● Click on the iMovie app on your Mac device and open your movie in the timeline. Select Audio in the menu located above the browser.

● In the audio sidebar, select from the dropdown; Sound Effects , GarageBand , or Music

The contents found in the selected item will appear as a list in the browser. Now, to filter what appears as a list in the browser:

Tap the pop-up menu located at the upper-left corner of the browser and select a category.

In the browser, select the song you want to add to your movie and then do any of the following:

a) Add all audio clips by dragging the clip from the list to the timeline.

b) Add a part of the audio clip by selecting a range in the waveform at the top of the browser. Then drag the range to the timeline.

● Finally, the audio clip will then be attached to a clip in the timeline. Therefore, the audio clip will move as well if you move the clip the audio clip is linked to.

Source

Part 2 Can I use iTunes songs on iMovie

Before we know how to add songs from iTunes iMovie, you must realize that all Music is protected. You will get an error statement that; “the songs you selected are not usable in iMovie because they are DRM (which means Digital Rights Management) protected.”

Note that to use the songs you had downloaded from iTunes, you must be sure that they have copyright permission. Otherwise, you won’t be able to use such themes in iMovie as those downloaded content through iTunes come up with limited rights only. Available options are:

● Import music from iTunes to iMovie (Already existing, downloaded files)

● Can purchase the track from iTunes Store

● Rip the CD

● Purchase music from Amazon

● Subscribe for the program named ‘Match’ under iTunes (That will assist you in getting duplicate copies of DRM free music.)

Noted: You can use all those tracks you own, but not those tracks that you get on a rental basis (such as from Apple Music).

Alternatively, you have one more option: you can add songs to iMovie from Spotify. If you are willing to learn how to add songs to iMovie from Spotify, the process is quite simple. Firstly transfer your Spotify music/songs to your music library. Then open iMovie > Add media> Add Music and select your desired song/music/track from the library.

This way, you can easily add songs from Spotify to iMovie.

Part 3 Where can I get free songs to add to iMovie

To get and add songs in iMovie, you can visit the following free platform to download the songs on your device.

● dig.ccMixter

If you are looking to find some excellent soundtrack, Music to make the iMovie add song process smooth, then using this platform will be the right approach.

● HookSounds

If you want to learn how to add a song on iMovie iPhone or Mac devices, getting Royalty-Free Resources will be the desired choice. And that choice you will get with HookSounds.

● Free sound

There is one more free music resource platform that will give you multiple options to get some incredible soundtracks for free so that you would be able to understand quickly how do you add songs to iMovie.

Conclusion

Listening to your favorite Music at your ease is the best thing in the world. Especially the freedom of Music, video editing with iMovie is a great relief to the iPhone, Mac users. But, the limited availability of Audio or songs under the iMovie library will reduce the expedition. And the question always arises how to add songs from Apple Music to iMovie or different ways to download iMovie add Songs. The article gives you a detailed description of how to add Songs to iMovie on Mac and how to add Songs to iMovie on iPhone devices with respective details. Additionally, the options given to free resources to download Music will provide you further guidance to enrich your music library with iMovie.

Try It Free Try It Free

“Can you add songs to iMovie? I need someone who can help me find a solution by providing a Detailed Guide on how to add songs in iMovie.”

It is a fact that iMovie is free for Apple users. There is a bit of a learning process that a user needs to go through before they start using it. It is also pertinant to understand that the simple process of adding a song to iMovie can be pretty tough if you do not understand the process.

Without delaying any further, let’s go through a quick detailed guide on how to add songs on iMovie as follows:

In this article

01 [How to add Music to iMovie [iPhone & Mac]](#Part 1)

02 [Can I use iTunes songs on iMovie](#Part 2)

03 [Where can I get free songs to add to iMovie](#Part 3)

Part 1 How to add Music to iMovie [iPhone & Mac]

iMovie provides Apple users with varieties of great opportunities, especially those who are much more interested in making videos to add transitions, cut clips, overlay titles, and do more on the platform. More so, for those using them already, you will notice that there are about five songs already, which can be somewhat overwhelming.

The good news is that Apple users can now add more songs on iMovie using the following steps:

For iPhone: there are different methods of adding songs to the iMovie project using your iPhone device:

Add theme music and soundtrack

● While your project is still open, click on Add Media button +and then click on Audio.

● Click on Soundtracks and all the Soundtracks that you need to download will appear showing a Download button next to them.

● Click on a soundtrack you want to download and download it. After you download a soundtrack, you can click on it to preview.

● To download all the soundtracks, click on the Download button in the upper right.

● To add a soundtrack, click on the soundtrack you want to add and then click on the Add Audio option + that appears to add a soundtrack to your project.

● Scroll down to the Theme Music section available at the Soundtracks list and add theme music to your project to add theme music.

Add background song stored on your device

● While your project is still open, click on Add Media button + and click on Audio.

● To look for songs previously synced to your device from your computer, click on My Music.

● To listen to a song before adding them, click on the song.

● To add a song to your iMovie project, click on the song and then click on the Add Audio button +.

Add imported songs from an iCloud drive or other audio

Scroll the timeline so the white vertical line known as the ‘Playhead’ appears while your project is still open and select where you want to add the audio clip or songs.

Note: The new clip gets added before or after an existing clip. This is if the ‘Playhead’ is resting over a current clip.

● Click on Add Media + and then click on Audio.

● Click on the iCloud Drive listed in the categories.

● Navigate to the folder with the audio you want to use, located at the iCloud pane,

● Click on the name of the audio clip or song you want to add and tap the Add Audio button +.

For Mac: There are different methods of adding songs to the iMovie project using your Mac device:

Add background Music

● Click on the iMovie app on your Mac device and open your movie in the timeline. Then select Audio located above the browser.

Source

● In the audio sidebar, select from the dropdown; Sound Effects , GarageBand , or Music

The contents found in the selected item will appear as a list in the browser. Therefore, to filter what appears as a list in the browser:

● Tap the pop-up menu at the upper-left corner and select a category.

● Look for the clip you want to add to your project in the browser.

● Drag and drop the clip to the background music well below the timeline.

You can now trim, edit, and position, the background audio independently of clips in the timeline.

Add a sound clip

● Click on the iMovie app on your Mac device and open your movie in the timeline. Select Audio in the menu located above the browser.

● In the audio sidebar, select from the dropdown; Sound Effects , GarageBand , or Music

The contents found in the selected item will appear as a list in the browser. Now, to filter what appears as a list in the browser:

Tap the pop-up menu located at the upper-left corner of the browser and select a category.

In the browser, select the song you want to add to your movie and then do any of the following:

a) Add all audio clips by dragging the clip from the list to the timeline.

b) Add a part of the audio clip by selecting a range in the waveform at the top of the browser. Then drag the range to the timeline.

● Finally, the audio clip will then be attached to a clip in the timeline. Therefore, the audio clip will move as well if you move the clip the audio clip is linked to.

Source

Part 2 Can I use iTunes songs on iMovie

Before we know how to add songs from iTunes iMovie, you must realize that all Music is protected. You will get an error statement that; “the songs you selected are not usable in iMovie because they are DRM (which means Digital Rights Management) protected.”

Note that to use the songs you had downloaded from iTunes, you must be sure that they have copyright permission. Otherwise, you won’t be able to use such themes in iMovie as those downloaded content through iTunes come up with limited rights only. Available options are:

● Import music from iTunes to iMovie (Already existing, downloaded files)

● Can purchase the track from iTunes Store

● Rip the CD

● Purchase music from Amazon

● Subscribe for the program named ‘Match’ under iTunes (That will assist you in getting duplicate copies of DRM free music.)

Noted: You can use all those tracks you own, but not those tracks that you get on a rental basis (such as from Apple Music).

Alternatively, you have one more option: you can add songs to iMovie from Spotify. If you are willing to learn how to add songs to iMovie from Spotify, the process is quite simple. Firstly transfer your Spotify music/songs to your music library. Then open iMovie > Add media> Add Music and select your desired song/music/track from the library.

This way, you can easily add songs from Spotify to iMovie.

Part 3 Where can I get free songs to add to iMovie

To get and add songs in iMovie, you can visit the following free platform to download the songs on your device.

● dig.ccMixter

If you are looking to find some excellent soundtrack, Music to make the iMovie add song process smooth, then using this platform will be the right approach.

● HookSounds

If you want to learn how to add a song on iMovie iPhone or Mac devices, getting Royalty-Free Resources will be the desired choice. And that choice you will get with HookSounds.

● Free sound

There is one more free music resource platform that will give you multiple options to get some incredible soundtracks for free so that you would be able to understand quickly how do you add songs to iMovie.

Conclusion

Listening to your favorite Music at your ease is the best thing in the world. Especially the freedom of Music, video editing with iMovie is a great relief to the iPhone, Mac users. But, the limited availability of Audio or songs under the iMovie library will reduce the expedition. And the question always arises how to add songs from Apple Music to iMovie or different ways to download iMovie add Songs. The article gives you a detailed description of how to add Songs to iMovie on Mac and how to add Songs to iMovie on iPhone devices with respective details. Additionally, the options given to free resources to download Music will provide you further guidance to enrich your music library with iMovie.

Try It Free Try It Free

“Can you add songs to iMovie? I need someone who can help me find a solution by providing a Detailed Guide on how to add songs in iMovie.”

It is a fact that iMovie is free for Apple users. There is a bit of a learning process that a user needs to go through before they start using it. It is also pertinant to understand that the simple process of adding a song to iMovie can be pretty tough if you do not understand the process.

Without delaying any further, let’s go through a quick detailed guide on how to add songs on iMovie as follows:

In this article

01 [How to add Music to iMovie [iPhone & Mac]](#Part 1)

02 [Can I use iTunes songs on iMovie](#Part 2)

03 [Where can I get free songs to add to iMovie](#Part 3)

Part 1 How to add Music to iMovie [iPhone & Mac]

iMovie provides Apple users with varieties of great opportunities, especially those who are much more interested in making videos to add transitions, cut clips, overlay titles, and do more on the platform. More so, for those using them already, you will notice that there are about five songs already, which can be somewhat overwhelming.

The good news is that Apple users can now add more songs on iMovie using the following steps:

For iPhone: there are different methods of adding songs to the iMovie project using your iPhone device:

Add theme music and soundtrack

● While your project is still open, click on Add Media button +and then click on Audio.

● Click on Soundtracks and all the Soundtracks that you need to download will appear showing a Download button next to them.

● Click on a soundtrack you want to download and download it. After you download a soundtrack, you can click on it to preview.

● To download all the soundtracks, click on the Download button in the upper right.

● To add a soundtrack, click on the soundtrack you want to add and then click on the Add Audio option + that appears to add a soundtrack to your project.

● Scroll down to the Theme Music section available at the Soundtracks list and add theme music to your project to add theme music.

Add background song stored on your device

● While your project is still open, click on Add Media button + and click on Audio.

● To look for songs previously synced to your device from your computer, click on My Music.

● To listen to a song before adding them, click on the song.

● To add a song to your iMovie project, click on the song and then click on the Add Audio button +.

Add imported songs from an iCloud drive or other audio

Scroll the timeline so the white vertical line known as the ‘Playhead’ appears while your project is still open and select where you want to add the audio clip or songs.

Note: The new clip gets added before or after an existing clip. This is if the ‘Playhead’ is resting over a current clip.

● Click on Add Media + and then click on Audio.

● Click on the iCloud Drive listed in the categories.

● Navigate to the folder with the audio you want to use, located at the iCloud pane,

● Click on the name of the audio clip or song you want to add and tap the Add Audio button +.

For Mac: There are different methods of adding songs to the iMovie project using your Mac device:

Add background Music

● Click on the iMovie app on your Mac device and open your movie in the timeline. Then select Audio located above the browser.

Source

● In the audio sidebar, select from the dropdown; Sound Effects , GarageBand , or Music

The contents found in the selected item will appear as a list in the browser. Therefore, to filter what appears as a list in the browser:

● Tap the pop-up menu at the upper-left corner and select a category.

● Look for the clip you want to add to your project in the browser.

● Drag and drop the clip to the background music well below the timeline.

You can now trim, edit, and position, the background audio independently of clips in the timeline.

Add a sound clip

● Click on the iMovie app on your Mac device and open your movie in the timeline. Select Audio in the menu located above the browser.

● In the audio sidebar, select from the dropdown; Sound Effects , GarageBand , or Music

The contents found in the selected item will appear as a list in the browser. Now, to filter what appears as a list in the browser:

Tap the pop-up menu located at the upper-left corner of the browser and select a category.

In the browser, select the song you want to add to your movie and then do any of the following:

a) Add all audio clips by dragging the clip from the list to the timeline.

b) Add a part of the audio clip by selecting a range in the waveform at the top of the browser. Then drag the range to the timeline.

● Finally, the audio clip will then be attached to a clip in the timeline. Therefore, the audio clip will move as well if you move the clip the audio clip is linked to.

Source

Part 2 Can I use iTunes songs on iMovie

Before we know how to add songs from iTunes iMovie, you must realize that all Music is protected. You will get an error statement that; “the songs you selected are not usable in iMovie because they are DRM (which means Digital Rights Management) protected.”

Note that to use the songs you had downloaded from iTunes, you must be sure that they have copyright permission. Otherwise, you won’t be able to use such themes in iMovie as those downloaded content through iTunes come up with limited rights only. Available options are:

● Import music from iTunes to iMovie (Already existing, downloaded files)

● Can purchase the track from iTunes Store

● Rip the CD

● Purchase music from Amazon

● Subscribe for the program named ‘Match’ under iTunes (That will assist you in getting duplicate copies of DRM free music.)

Noted: You can use all those tracks you own, but not those tracks that you get on a rental basis (such as from Apple Music).

Alternatively, you have one more option: you can add songs to iMovie from Spotify. If you are willing to learn how to add songs to iMovie from Spotify, the process is quite simple. Firstly transfer your Spotify music/songs to your music library. Then open iMovie > Add media> Add Music and select your desired song/music/track from the library.

This way, you can easily add songs from Spotify to iMovie.

Part 3 Where can I get free songs to add to iMovie

To get and add songs in iMovie, you can visit the following free platform to download the songs on your device.

● dig.ccMixter

If you are looking to find some excellent soundtrack, Music to make the iMovie add song process smooth, then using this platform will be the right approach.

● HookSounds

If you want to learn how to add a song on iMovie iPhone or Mac devices, getting Royalty-Free Resources will be the desired choice. And that choice you will get with HookSounds.

● Free sound

There is one more free music resource platform that will give you multiple options to get some incredible soundtracks for free so that you would be able to understand quickly how do you add songs to iMovie.

Conclusion

Listening to your favorite Music at your ease is the best thing in the world. Especially the freedom of Music, video editing with iMovie is a great relief to the iPhone, Mac users. But, the limited availability of Audio or songs under the iMovie library will reduce the expedition. And the question always arises how to add songs from Apple Music to iMovie or different ways to download iMovie add Songs. The article gives you a detailed description of how to add Songs to iMovie on Mac and how to add Songs to iMovie on iPhone devices with respective details. Additionally, the options given to free resources to download Music will provide you further guidance to enrich your music library with iMovie.

Try It Free Try It Free

“Can you add songs to iMovie? I need someone who can help me find a solution by providing a Detailed Guide on how to add songs in iMovie.”

It is a fact that iMovie is free for Apple users. There is a bit of a learning process that a user needs to go through before they start using it. It is also pertinant to understand that the simple process of adding a song to iMovie can be pretty tough if you do not understand the process.

Without delaying any further, let’s go through a quick detailed guide on how to add songs on iMovie as follows:

In this article

01 [How to add Music to iMovie [iPhone & Mac]](#Part 1)

02 [Can I use iTunes songs on iMovie](#Part 2)

03 [Where can I get free songs to add to iMovie](#Part 3)

Part 1 How to add Music to iMovie [iPhone & Mac]

iMovie provides Apple users with varieties of great opportunities, especially those who are much more interested in making videos to add transitions, cut clips, overlay titles, and do more on the platform. More so, for those using them already, you will notice that there are about five songs already, which can be somewhat overwhelming.

The good news is that Apple users can now add more songs on iMovie using the following steps:

For iPhone: there are different methods of adding songs to the iMovie project using your iPhone device:

Add theme music and soundtrack

● While your project is still open, click on Add Media button +and then click on Audio.

● Click on Soundtracks and all the Soundtracks that you need to download will appear showing a Download button next to them.

● Click on a soundtrack you want to download and download it. After you download a soundtrack, you can click on it to preview.

● To download all the soundtracks, click on the Download button in the upper right.

● To add a soundtrack, click on the soundtrack you want to add and then click on the Add Audio option + that appears to add a soundtrack to your project.

● Scroll down to the Theme Music section available at the Soundtracks list and add theme music to your project to add theme music.

Add background song stored on your device

● While your project is still open, click on Add Media button + and click on Audio.

● To look for songs previously synced to your device from your computer, click on My Music.

● To listen to a song before adding them, click on the song.

● To add a song to your iMovie project, click on the song and then click on the Add Audio button +.

Add imported songs from an iCloud drive or other audio

Scroll the timeline so the white vertical line known as the ‘Playhead’ appears while your project is still open and select where you want to add the audio clip or songs.

Note: The new clip gets added before or after an existing clip. This is if the ‘Playhead’ is resting over a current clip.

● Click on Add Media + and then click on Audio.

● Click on the iCloud Drive listed in the categories.

● Navigate to the folder with the audio you want to use, located at the iCloud pane,

● Click on the name of the audio clip or song you want to add and tap the Add Audio button +.

For Mac: There are different methods of adding songs to the iMovie project using your Mac device:

Add background Music

● Click on the iMovie app on your Mac device and open your movie in the timeline. Then select Audio located above the browser.

Source

● In the audio sidebar, select from the dropdown; Sound Effects , GarageBand , or Music

The contents found in the selected item will appear as a list in the browser. Therefore, to filter what appears as a list in the browser:

● Tap the pop-up menu at the upper-left corner and select a category.

● Look for the clip you want to add to your project in the browser.

● Drag and drop the clip to the background music well below the timeline.

You can now trim, edit, and position, the background audio independently of clips in the timeline.

Add a sound clip

● Click on the iMovie app on your Mac device and open your movie in the timeline. Select Audio in the menu located above the browser.

● In the audio sidebar, select from the dropdown; Sound Effects , GarageBand , or Music

The contents found in the selected item will appear as a list in the browser. Now, to filter what appears as a list in the browser:

Tap the pop-up menu located at the upper-left corner of the browser and select a category.

In the browser, select the song you want to add to your movie and then do any of the following:

a) Add all audio clips by dragging the clip from the list to the timeline.

b) Add a part of the audio clip by selecting a range in the waveform at the top of the browser. Then drag the range to the timeline.

● Finally, the audio clip will then be attached to a clip in the timeline. Therefore, the audio clip will move as well if you move the clip the audio clip is linked to.

Source

Part 2 Can I use iTunes songs on iMovie

Before we know how to add songs from iTunes iMovie, you must realize that all Music is protected. You will get an error statement that; “the songs you selected are not usable in iMovie because they are DRM (which means Digital Rights Management) protected.”

Note that to use the songs you had downloaded from iTunes, you must be sure that they have copyright permission. Otherwise, you won’t be able to use such themes in iMovie as those downloaded content through iTunes come up with limited rights only. Available options are:

● Import music from iTunes to iMovie (Already existing, downloaded files)

● Can purchase the track from iTunes Store

● Rip the CD

● Purchase music from Amazon

● Subscribe for the program named ‘Match’ under iTunes (That will assist you in getting duplicate copies of DRM free music.)

Noted: You can use all those tracks you own, but not those tracks that you get on a rental basis (such as from Apple Music).

Alternatively, you have one more option: you can add songs to iMovie from Spotify. If you are willing to learn how to add songs to iMovie from Spotify, the process is quite simple. Firstly transfer your Spotify music/songs to your music library. Then open iMovie > Add media> Add Music and select your desired song/music/track from the library.

This way, you can easily add songs from Spotify to iMovie.

Part 3 Where can I get free songs to add to iMovie

To get and add songs in iMovie, you can visit the following free platform to download the songs on your device.

● dig.ccMixter

If you are looking to find some excellent soundtrack, Music to make the iMovie add song process smooth, then using this platform will be the right approach.

● HookSounds

If you want to learn how to add a song on iMovie iPhone or Mac devices, getting Royalty-Free Resources will be the desired choice. And that choice you will get with HookSounds.

● Free sound

There is one more free music resource platform that will give you multiple options to get some incredible soundtracks for free so that you would be able to understand quickly how do you add songs to iMovie.

Conclusion

Listening to your favorite Music at your ease is the best thing in the world. Especially the freedom of Music, video editing with iMovie is a great relief to the iPhone, Mac users. But, the limited availability of Audio or songs under the iMovie library will reduce the expedition. And the question always arises how to add songs from Apple Music to iMovie or different ways to download iMovie add Songs. The article gives you a detailed description of how to add Songs to iMovie on Mac and how to add Songs to iMovie on iPhone devices with respective details. Additionally, the options given to free resources to download Music will provide you further guidance to enrich your music library with iMovie.

Uncovering Fragmentation Auditory Signal

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

There are a few different places where you can find glass-breaking sound effects. One place is online, on websites like SoundCloud or YouTube. Many apps offer glass-breaking sound effects as part of their library of sounds. A quick internet search will reveal various sites to download these effects for free.

Keep in mind that not all of these sites are completely free. Some of them will only offer free glass-breaking sound effects for certain uses, while others may limit how many times you can use their sounds before charging a fee.

You can also find glass-breaking sounds in libraries of sound effects. These collections are available for purchase, or they may be available to download for free. If you are looking for a specific sound effect, it is often easiest to search for it by name. This will help you to find the right sound effect quickly and easily.

Finally, if you have access to a recording studio, you can record the sound yourself. In this article, we are going to help you with the whole matter with step by step guide. So read on to know more!

In this article

01 [Ways to Download All Kinds of Sound Effect](#Part 1)

02 [Use Filmora to Add Background Music in Your Video](#Part 2)

Part 1 Ways to Download All Kinds of Sound Effect

Among many ways to download or create all kinds of sound effect including glass breaking/shattering sound effect, here are some of the ways for you to follow –

1. Freesound

This site has thousands of sound effects available under the Creative Commons 0 license. This means that they can be used for any purpose, personal or commercial, without attribution or permission required. To download music from Freesound, follow these steps.

Step 1: Go to the Freesound website.

Step 2: Search for the sound you want to download.

Step 3: Click on the sound to listen to it.

Step 4: Click on the Download button.

Step 5: Save the sound to your computer.

2. Incompetech

This site offers royalty-free music and sound effects used in a commercial or non-commercial project. All of the sounds are available for download in MP3 format.

Step 1: First of all, go to Incompetech and open up any page on the site. You’ll see that there are links on the left side.

Step 2: Click on one of those links, and you’ll see a list of songs of that category. Once again, click on one of the songs to open up another page where you can listen to it.

Step 3: Once you’re done listening, scroll down, and you’ll see a link that says “Download this song”. Click on the link, and it will start downloading automatically.

Step 4: Once downloaded, go into your project and put in the music track where you want the song to go in. If you want a song to be longer, re-download the song and find that “Download this song” link again. Put it where you want the new end of the music to be.

3. Orange Free Sounds

This site offers various sound effects that are free to download and use in your projects. The sound effects are available in MP3 format and can be used for personal or commercial purposes. Here is how to download a video from orange free sounds step by step.

Step 1: Go to the URL of the video. The URL is the address of the video that you want to download. Copy it and paste it in a new tab or window if your browser doesn’t automatically do it for you.

Step 2: The next step is to go to a website called SaveFrom.net. When the page has loaded, look for the big blue button that says “Download Video”. A new tab or window will open with the download page. It would be best to paste the video URL in the “Enter a video URL” bar.

Step 3: After pasting it, click on “Download this video” (the blue button). When it appears, press on one of them. I usually go for mp3 format because it keeps good quality and it’s the most used format that you can play on many devices.

Step 4: The next step is to wait until it downloads. Depending on your connection speed, it may take a few minutes, but it usually doesn’t even take one minute to download 100Mb videos. When it has finished downloading, look for the green button that says “Download to your computer” (you may have to scroll down the page).

Step 5: Click on it, and it will start downloading. You can click on “Open folder” or let it open automatically when the download is finished. When the download finishes, you can play it with any audio player that supports mp3 files.

4. SoundBible

This website offers free sound effects that can be downloaded and used in your projects. The sound effects are available in MP3 format and can be used for personal or commercial purposes. There is a free option and a premium option. Here is how to use SoundBible for collecting sound effects.

Step 1: Open SoundBible website.

Step 2: Look for the download button, which is located in the upper right-hand corner of your screen.

Step 3: Click on it to open another drop-down menu with “Royalty” and “Free” options, click the “Free” option.

Step 4: Scroll down to the bottom of the page.

Step 5: Click “Download”.

Step 6: You will be able to download your sound effect onto your computer.

Please note: These glass-breaking sound effects are in .mp3 format and can be used freely in your video games and animated projects under the terms of the Attribution 3.0 license.

5. ZapSplat

This website offers a wide variety of sound effects that are free to download and use in your projects. The sound effects are available in WAV format and can be used for personal or commercial purposes.

Step 1: Go to Zapslat website, click on ZapSplat.

Step 2: Type the name of your project, then go to the search tab and find your project.

Step 3: When the video has finished importing, you can change the playback speed and add effects.

Step 4: To export your project, click on the share button and select “Download”. You can then save your video to your computer.

Part 2 Use Filmora to Add Background Music in Your Video

Filmora is an easy video editing software that is easy to use and has a wide range of features. It is available for both Windows and Mac users. Some of the features of Filmora include adding text, music, and filters to your videos. You can also create slideshows, animated titles, and green screen effects. Filmora has a glass-breaking effect. This can be added to your video to give it a dramatic ending or a thrilling start. It can signify the end of a relationship or other momentous occasion. You can choose from different types of glass-breaking sound effects, like champagne glasses clinking together, breaking glass, or the sound of a window shattering.

Features:

• The software features a manual mode for advanced control over the video editing process and express mode for quick and easy creation of videos. It also supports 4K video editing.
• One of the program’s most distinctive features is the glass-breaking sound effect. When a clip is edited and played back, this sound can be heard whenever the clip is paused or stopped. This effect was added to make the editing process more realistic.
• Another distinctive feature of Filmora is the glass shutter sound effect. This sound can be heard when a clip is edited and played back. It was added to make the editing process more realistic and enhance the user’s experience.
• If you are looking for video editing software that offers a realistic editing experience, Filmora is the right choice for you. It features two unique sound effects that add a touch of realism and make the editing process more exciting.
  Some features include adding text, music, and audio effects and creating titles and intro/outros.

Step by Step Guide for How to Add Sound Effects to Video With Filmora:

Step 1: Go to the Filmora official website, install wonder share Filmora and lunch it. Once it’s launched, you will find a tab just below the menu bar, tap media, and click import. After this, there will be a drop-down where you can click on import media files and choose the video file. Repeat the process to pick the desired background music. You can also use build-in music tracks to add music to your video by selecting the Music tab.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 2: Now you can navigate over the video you imported to Filmora, then tap on the sign ‘+’on it alternatively; you can drag down to the timeline the media file.

Step 3: Now edit your music by double-tapping the audio from the timeline. It will display the audio panel at the top of the screen. You can use it to set the desired equalizer, manage pitch volume and speed. You can also use the forum to fade in or fade out.

Step 4: Finally, you can now export the video that has made the desired changes by clicking ‘export’ on the toolbar to export the video. You can now save the exported in the desired format and remember to rename it directly.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

AI Portrait – The best feature of Wondershare Filmora for gameplay editing

The AI Portrait is a new add-on in Wondershare Filmora. It can easily remove video backgrounds without using a green screen or chroma key, allowing you to add borders, glitch effects, pixelated, noise, or segmentation video effects.

Conclusion

Glass-breaking sound effects are a great way to give your video or project some real, dramatic flair. These sounds for free online. Do an internet search, and you’ll come up with plenty of sites that offer them as downloads. Note that not all of those websites will be completely free; those that only provide their glass-breaking sounds for certain uses may charge a fee after using it more than a certain number of times.

Filmora is a video editing program that’s simple enough for beginners but powerful enough to satisfy even the most advanced editors. With features like manual mode and glass-breaking sound effects, you can easily create videos. Hope this article helps you with collecting glass breaking/shattering sound effects and adding them into videos using Filmora.

Try It Free Try It Free

There are a few different places where you can find glass-breaking sound effects. One place is online, on websites like SoundCloud or YouTube. Many apps offer glass-breaking sound effects as part of their library of sounds. A quick internet search will reveal various sites to download these effects for free.

Keep in mind that not all of these sites are completely free. Some of them will only offer free glass-breaking sound effects for certain uses, while others may limit how many times you can use their sounds before charging a fee.

You can also find glass-breaking sounds in libraries of sound effects. These collections are available for purchase, or they may be available to download for free. If you are looking for a specific sound effect, it is often easiest to search for it by name. This will help you to find the right sound effect quickly and easily.

Finally, if you have access to a recording studio, you can record the sound yourself. In this article, we are going to help you with the whole matter with step by step guide. So read on to know more!

In this article

01 [Ways to Download All Kinds of Sound Effect](#Part 1)

02 [Use Filmora to Add Background Music in Your Video](#Part 2)

Part 1 Ways to Download All Kinds of Sound Effect

Among many ways to download or create all kinds of sound effect including glass breaking/shattering sound effect, here are some of the ways for you to follow –

1. Freesound

This site has thousands of sound effects available under the Creative Commons 0 license. This means that they can be used for any purpose, personal or commercial, without attribution or permission required. To download music from Freesound, follow these steps.

Step 1: Go to the Freesound website.

Step 2: Search for the sound you want to download.

Step 3: Click on the sound to listen to it.

Step 4: Click on the Download button.

Step 5: Save the sound to your computer.

2. Incompetech

This site offers royalty-free music and sound effects used in a commercial or non-commercial project. All of the sounds are available for download in MP3 format.

Step 1: First of all, go to Incompetech and open up any page on the site. You’ll see that there are links on the left side.

Step 2: Click on one of those links, and you’ll see a list of songs of that category. Once again, click on one of the songs to open up another page where you can listen to it.

Step 3: Once you’re done listening, scroll down, and you’ll see a link that says “Download this song”. Click on the link, and it will start downloading automatically.

Step 4: Once downloaded, go into your project and put in the music track where you want the song to go in. If you want a song to be longer, re-download the song and find that “Download this song” link again. Put it where you want the new end of the music to be.

3. Orange Free Sounds

This site offers various sound effects that are free to download and use in your projects. The sound effects are available in MP3 format and can be used for personal or commercial purposes. Here is how to download a video from orange free sounds step by step.

Step 1: Go to the URL of the video. The URL is the address of the video that you want to download. Copy it and paste it in a new tab or window if your browser doesn’t automatically do it for you.

Step 2: The next step is to go to a website called SaveFrom.net. When the page has loaded, look for the big blue button that says “Download Video”. A new tab or window will open with the download page. It would be best to paste the video URL in the “Enter a video URL” bar.

Step 3: After pasting it, click on “Download this video” (the blue button). When it appears, press on one of them. I usually go for mp3 format because it keeps good quality and it’s the most used format that you can play on many devices.

Step 4: The next step is to wait until it downloads. Depending on your connection speed, it may take a few minutes, but it usually doesn’t even take one minute to download 100Mb videos. When it has finished downloading, look for the green button that says “Download to your computer” (you may have to scroll down the page).

Step 5: Click on it, and it will start downloading. You can click on “Open folder” or let it open automatically when the download is finished. When the download finishes, you can play it with any audio player that supports mp3 files.

4. SoundBible

This website offers free sound effects that can be downloaded and used in your projects. The sound effects are available in MP3 format and can be used for personal or commercial purposes. There is a free option and a premium option. Here is how to use SoundBible for collecting sound effects.

Step 1: Open SoundBible website.

Step 2: Look for the download button, which is located in the upper right-hand corner of your screen.

Step 3: Click on it to open another drop-down menu with “Royalty” and “Free” options, click the “Free” option.

Step 4: Scroll down to the bottom of the page.

Step 5: Click “Download”.

Step 6: You will be able to download your sound effect onto your computer.

Please note: These glass-breaking sound effects are in .mp3 format and can be used freely in your video games and animated projects under the terms of the Attribution 3.0 license.

5. ZapSplat

This website offers a wide variety of sound effects that are free to download and use in your projects. The sound effects are available in WAV format and can be used for personal or commercial purposes.

Step 1: Go to Zapslat website, click on ZapSplat.

Step 2: Type the name of your project, then go to the search tab and find your project.

Step 3: When the video has finished importing, you can change the playback speed and add effects.

Step 4: To export your project, click on the share button and select “Download”. You can then save your video to your computer.

Part 2 Use Filmora to Add Background Music in Your Video

Filmora is an easy video editing software that is easy to use and has a wide range of features. It is available for both Windows and Mac users. Some of the features of Filmora include adding text, music, and filters to your videos. You can also create slideshows, animated titles, and green screen effects. Filmora has a glass-breaking effect. This can be added to your video to give it a dramatic ending or a thrilling start. It can signify the end of a relationship or other momentous occasion. You can choose from different types of glass-breaking sound effects, like champagne glasses clinking together, breaking glass, or the sound of a window shattering.

Features:

• The software features a manual mode for advanced control over the video editing process and express mode for quick and easy creation of videos. It also supports 4K video editing.
• One of the program’s most distinctive features is the glass-breaking sound effect. When a clip is edited and played back, this sound can be heard whenever the clip is paused or stopped. This effect was added to make the editing process more realistic.
• Another distinctive feature of Filmora is the glass shutter sound effect. This sound can be heard when a clip is edited and played back. It was added to make the editing process more realistic and enhance the user’s experience.
• If you are looking for video editing software that offers a realistic editing experience, Filmora is the right choice for you. It features two unique sound effects that add a touch of realism and make the editing process more exciting.
  Some features include adding text, music, and audio effects and creating titles and intro/outros.

Step by Step Guide for How to Add Sound Effects to Video With Filmora:

Step 1: Go to the Filmora official website, install wonder share Filmora and lunch it. Once it’s launched, you will find a tab just below the menu bar, tap media, and click import. After this, there will be a drop-down where you can click on import media files and choose the video file. Repeat the process to pick the desired background music. You can also use build-in music tracks to add music to your video by selecting the Music tab.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 2: Now you can navigate over the video you imported to Filmora, then tap on the sign ‘+’on it alternatively; you can drag down to the timeline the media file.

Step 3: Now edit your music by double-tapping the audio from the timeline. It will display the audio panel at the top of the screen. You can use it to set the desired equalizer, manage pitch volume and speed. You can also use the forum to fade in or fade out.

Step 4: Finally, you can now export the video that has made the desired changes by clicking ‘export’ on the toolbar to export the video. You can now save the exported in the desired format and remember to rename it directly.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

AI Portrait – The best feature of Wondershare Filmora for gameplay editing

The AI Portrait is a new add-on in Wondershare Filmora. It can easily remove video backgrounds without using a green screen or chroma key, allowing you to add borders, glitch effects, pixelated, noise, or segmentation video effects.

Conclusion

Glass-breaking sound effects are a great way to give your video or project some real, dramatic flair. These sounds for free online. Do an internet search, and you’ll come up with plenty of sites that offer them as downloads. Note that not all of those websites will be completely free; those that only provide their glass-breaking sounds for certain uses may charge a fee after using it more than a certain number of times.

Filmora is a video editing program that’s simple enough for beginners but powerful enough to satisfy even the most advanced editors. With features like manual mode and glass-breaking sound effects, you can easily create videos. Hope this article helps you with collecting glass breaking/shattering sound effects and adding them into videos using Filmora.

Try It Free Try It Free

There are a few different places where you can find glass-breaking sound effects. One place is online, on websites like SoundCloud or YouTube. Many apps offer glass-breaking sound effects as part of their library of sounds. A quick internet search will reveal various sites to download these effects for free.

Keep in mind that not all of these sites are completely free. Some of them will only offer free glass-breaking sound effects for certain uses, while others may limit how many times you can use their sounds before charging a fee.

You can also find glass-breaking sounds in libraries of sound effects. These collections are available for purchase, or they may be available to download for free. If you are looking for a specific sound effect, it is often easiest to search for it by name. This will help you to find the right sound effect quickly and easily.

Finally, if you have access to a recording studio, you can record the sound yourself. In this article, we are going to help you with the whole matter with step by step guide. So read on to know more!

In this article

01 [Ways to Download All Kinds of Sound Effect](#Part 1)

02 [Use Filmora to Add Background Music in Your Video](#Part 2)

Part 1 Ways to Download All Kinds of Sound Effect

Among many ways to download or create all kinds of sound effect including glass breaking/shattering sound effect, here are some of the ways for you to follow –

1. Freesound

This site has thousands of sound effects available under the Creative Commons 0 license. This means that they can be used for any purpose, personal or commercial, without attribution or permission required. To download music from Freesound, follow these steps.

Step 1: Go to the Freesound website.

Step 2: Search for the sound you want to download.

Step 3: Click on the sound to listen to it.

Step 4: Click on the Download button.

Step 5: Save the sound to your computer.

2. Incompetech

This site offers royalty-free music and sound effects used in a commercial or non-commercial project. All of the sounds are available for download in MP3 format.

Step 1: First of all, go to Incompetech and open up any page on the site. You’ll see that there are links on the left side.

Step 2: Click on one of those links, and you’ll see a list of songs of that category. Once again, click on one of the songs to open up another page where you can listen to it.

Step 3: Once you’re done listening, scroll down, and you’ll see a link that says “Download this song”. Click on the link, and it will start downloading automatically.

Step 4: Once downloaded, go into your project and put in the music track where you want the song to go in. If you want a song to be longer, re-download the song and find that “Download this song” link again. Put it where you want the new end of the music to be.

3. Orange Free Sounds

This site offers various sound effects that are free to download and use in your projects. The sound effects are available in MP3 format and can be used for personal or commercial purposes. Here is how to download a video from orange free sounds step by step.

Step 1: Go to the URL of the video. The URL is the address of the video that you want to download. Copy it and paste it in a new tab or window if your browser doesn’t automatically do it for you.

Step 2: The next step is to go to a website called SaveFrom.net. When the page has loaded, look for the big blue button that says “Download Video”. A new tab or window will open with the download page. It would be best to paste the video URL in the “Enter a video URL” bar.

Step 3: After pasting it, click on “Download this video” (the blue button). When it appears, press on one of them. I usually go for mp3 format because it keeps good quality and it’s the most used format that you can play on many devices.

Step 4: The next step is to wait until it downloads. Depending on your connection speed, it may take a few minutes, but it usually doesn’t even take one minute to download 100Mb videos. When it has finished downloading, look for the green button that says “Download to your computer” (you may have to scroll down the page).

Step 5: Click on it, and it will start downloading. You can click on “Open folder” or let it open automatically when the download is finished. When the download finishes, you can play it with any audio player that supports mp3 files.

4. SoundBible

This website offers free sound effects that can be downloaded and used in your projects. The sound effects are available in MP3 format and can be used for personal or commercial purposes. There is a free option and a premium option. Here is how to use SoundBible for collecting sound effects.

Step 1: Open SoundBible website.

Step 2: Look for the download button, which is located in the upper right-hand corner of your screen.

Step 3: Click on it to open another drop-down menu with “Royalty” and “Free” options, click the “Free” option.

Step 4: Scroll down to the bottom of the page.

Step 5: Click “Download”.

Step 6: You will be able to download your sound effect onto your computer.

Please note: These glass-breaking sound effects are in .mp3 format and can be used freely in your video games and animated projects under the terms of the Attribution 3.0 license.

5. ZapSplat

This website offers a wide variety of sound effects that are free to download and use in your projects. The sound effects are available in WAV format and can be used for personal or commercial purposes.

Step 1: Go to Zapslat website, click on ZapSplat.

Step 2: Type the name of your project, then go to the search tab and find your project.

Step 3: When the video has finished importing, you can change the playback speed and add effects.

Step 4: To export your project, click on the share button and select “Download”. You can then save your video to your computer.

Part 2 Use Filmora to Add Background Music in Your Video

Filmora is an easy video editing software that is easy to use and has a wide range of features. It is available for both Windows and Mac users. Some of the features of Filmora include adding text, music, and filters to your videos. You can also create slideshows, animated titles, and green screen effects. Filmora has a glass-breaking effect. This can be added to your video to give it a dramatic ending or a thrilling start. It can signify the end of a relationship or other momentous occasion. You can choose from different types of glass-breaking sound effects, like champagne glasses clinking together, breaking glass, or the sound of a window shattering.

Features:

• The software features a manual mode for advanced control over the video editing process and express mode for quick and easy creation of videos. It also supports 4K video editing.
• One of the program’s most distinctive features is the glass-breaking sound effect. When a clip is edited and played back, this sound can be heard whenever the clip is paused or stopped. This effect was added to make the editing process more realistic.
• Another distinctive feature of Filmora is the glass shutter sound effect. This sound can be heard when a clip is edited and played back. It was added to make the editing process more realistic and enhance the user’s experience.
• If you are looking for video editing software that offers a realistic editing experience, Filmora is the right choice for you. It features two unique sound effects that add a touch of realism and make the editing process more exciting.
  Some features include adding text, music, and audio effects and creating titles and intro/outros.

Step by Step Guide for How to Add Sound Effects to Video With Filmora:

Step 1: Go to the Filmora official website, install wonder share Filmora and lunch it. Once it’s launched, you will find a tab just below the menu bar, tap media, and click import. After this, there will be a drop-down where you can click on import media files and choose the video file. Repeat the process to pick the desired background music. You can also use build-in music tracks to add music to your video by selecting the Music tab.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 2: Now you can navigate over the video you imported to Filmora, then tap on the sign ‘+’on it alternatively; you can drag down to the timeline the media file.

Step 3: Now edit your music by double-tapping the audio from the timeline. It will display the audio panel at the top of the screen. You can use it to set the desired equalizer, manage pitch volume and speed. You can also use the forum to fade in or fade out.

Step 4: Finally, you can now export the video that has made the desired changes by clicking ‘export’ on the toolbar to export the video. You can now save the exported in the desired format and remember to rename it directly.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

AI Portrait – The best feature of Wondershare Filmora for gameplay editing

The AI Portrait is a new add-on in Wondershare Filmora. It can easily remove video backgrounds without using a green screen or chroma key, allowing you to add borders, glitch effects, pixelated, noise, or segmentation video effects.

Conclusion

Glass-breaking sound effects are a great way to give your video or project some real, dramatic flair. These sounds for free online. Do an internet search, and you’ll come up with plenty of sites that offer them as downloads. Note that not all of those websites will be completely free; those that only provide their glass-breaking sounds for certain uses may charge a fee after using it more than a certain number of times.

Filmora is a video editing program that’s simple enough for beginners but powerful enough to satisfy even the most advanced editors. With features like manual mode and glass-breaking sound effects, you can easily create videos. Hope this article helps you with collecting glass breaking/shattering sound effects and adding them into videos using Filmora.

Try It Free Try It Free

There are a few different places where you can find glass-breaking sound effects. One place is online, on websites like SoundCloud or YouTube. Many apps offer glass-breaking sound effects as part of their library of sounds. A quick internet search will reveal various sites to download these effects for free.

Keep in mind that not all of these sites are completely free. Some of them will only offer free glass-breaking sound effects for certain uses, while others may limit how many times you can use their sounds before charging a fee.

You can also find glass-breaking sounds in libraries of sound effects. These collections are available for purchase, or they may be available to download for free. If you are looking for a specific sound effect, it is often easiest to search for it by name. This will help you to find the right sound effect quickly and easily.

Finally, if you have access to a recording studio, you can record the sound yourself. In this article, we are going to help you with the whole matter with step by step guide. So read on to know more!

In this article

01 [Ways to Download All Kinds of Sound Effect](#Part 1)

02 [Use Filmora to Add Background Music in Your Video](#Part 2)

Part 1 Ways to Download All Kinds of Sound Effect

Among many ways to download or create all kinds of sound effect including glass breaking/shattering sound effect, here are some of the ways for you to follow –

1. Freesound

This site has thousands of sound effects available under the Creative Commons 0 license. This means that they can be used for any purpose, personal or commercial, without attribution or permission required. To download music from Freesound, follow these steps.

Step 1: Go to the Freesound website.

Step 2: Search for the sound you want to download.

Step 3: Click on the sound to listen to it.

Step 4: Click on the Download button.

Step 5: Save the sound to your computer.

2. Incompetech

This site offers royalty-free music and sound effects used in a commercial or non-commercial project. All of the sounds are available for download in MP3 format.

Step 1: First of all, go to Incompetech and open up any page on the site. You’ll see that there are links on the left side.

Step 2: Click on one of those links, and you’ll see a list of songs of that category. Once again, click on one of the songs to open up another page where you can listen to it.

Step 3: Once you’re done listening, scroll down, and you’ll see a link that says “Download this song”. Click on the link, and it will start downloading automatically.

Step 4: Once downloaded, go into your project and put in the music track where you want the song to go in. If you want a song to be longer, re-download the song and find that “Download this song” link again. Put it where you want the new end of the music to be.

3. Orange Free Sounds

This site offers various sound effects that are free to download and use in your projects. The sound effects are available in MP3 format and can be used for personal or commercial purposes. Here is how to download a video from orange free sounds step by step.

Step 1: Go to the URL of the video. The URL is the address of the video that you want to download. Copy it and paste it in a new tab or window if your browser doesn’t automatically do it for you.

Step 2: The next step is to go to a website called SaveFrom.net. When the page has loaded, look for the big blue button that says “Download Video”. A new tab or window will open with the download page. It would be best to paste the video URL in the “Enter a video URL” bar.

Step 3: After pasting it, click on “Download this video” (the blue button). When it appears, press on one of them. I usually go for mp3 format because it keeps good quality and it’s the most used format that you can play on many devices.

Step 4: The next step is to wait until it downloads. Depending on your connection speed, it may take a few minutes, but it usually doesn’t even take one minute to download 100Mb videos. When it has finished downloading, look for the green button that says “Download to your computer” (you may have to scroll down the page).

Step 5: Click on it, and it will start downloading. You can click on “Open folder” or let it open automatically when the download is finished. When the download finishes, you can play it with any audio player that supports mp3 files.

4. SoundBible

This website offers free sound effects that can be downloaded and used in your projects. The sound effects are available in MP3 format and can be used for personal or commercial purposes. There is a free option and a premium option. Here is how to use SoundBible for collecting sound effects.

Step 1: Open SoundBible website.

Step 2: Look for the download button, which is located in the upper right-hand corner of your screen.

Step 3: Click on it to open another drop-down menu with “Royalty” and “Free” options, click the “Free” option.

Step 4: Scroll down to the bottom of the page.

Step 5: Click “Download”.

Step 6: You will be able to download your sound effect onto your computer.

Please note: These glass-breaking sound effects are in .mp3 format and can be used freely in your video games and animated projects under the terms of the Attribution 3.0 license.

5. ZapSplat

This website offers a wide variety of sound effects that are free to download and use in your projects. The sound effects are available in WAV format and can be used for personal or commercial purposes.

Step 1: Go to Zapslat website, click on ZapSplat.

Step 2: Type the name of your project, then go to the search tab and find your project.

Step 3: When the video has finished importing, you can change the playback speed and add effects.

Step 4: To export your project, click on the share button and select “Download”. You can then save your video to your computer.

Part 2 Use Filmora to Add Background Music in Your Video

Filmora is an easy video editing software that is easy to use and has a wide range of features. It is available for both Windows and Mac users. Some of the features of Filmora include adding text, music, and filters to your videos. You can also create slideshows, animated titles, and green screen effects. Filmora has a glass-breaking effect. This can be added to your video to give it a dramatic ending or a thrilling start. It can signify the end of a relationship or other momentous occasion. You can choose from different types of glass-breaking sound effects, like champagne glasses clinking together, breaking glass, or the sound of a window shattering.

Features:

• The software features a manual mode for advanced control over the video editing process and express mode for quick and easy creation of videos. It also supports 4K video editing.
• One of the program’s most distinctive features is the glass-breaking sound effect. When a clip is edited and played back, this sound can be heard whenever the clip is paused or stopped. This effect was added to make the editing process more realistic.
• Another distinctive feature of Filmora is the glass shutter sound effect. This sound can be heard when a clip is edited and played back. It was added to make the editing process more realistic and enhance the user’s experience.
• If you are looking for video editing software that offers a realistic editing experience, Filmora is the right choice for you. It features two unique sound effects that add a touch of realism and make the editing process more exciting.
  Some features include adding text, music, and audio effects and creating titles and intro/outros.

Step by Step Guide for How to Add Sound Effects to Video With Filmora:

Step 1: Go to the Filmora official website, install wonder share Filmora and lunch it. Once it’s launched, you will find a tab just below the menu bar, tap media, and click import. After this, there will be a drop-down where you can click on import media files and choose the video file. Repeat the process to pick the desired background music. You can also use build-in music tracks to add music to your video by selecting the Music tab.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 2: Now you can navigate over the video you imported to Filmora, then tap on the sign ‘+’on it alternatively; you can drag down to the timeline the media file.

Step 3: Now edit your music by double-tapping the audio from the timeline. It will display the audio panel at the top of the screen. You can use it to set the desired equalizer, manage pitch volume and speed. You can also use the forum to fade in or fade out.

Step 4: Finally, you can now export the video that has made the desired changes by clicking ‘export’ on the toolbar to export the video. You can now save the exported in the desired format and remember to rename it directly.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

AI Portrait – The best feature of Wondershare Filmora for gameplay editing

The AI Portrait is a new add-on in Wondershare Filmora. It can easily remove video backgrounds without using a green screen or chroma key, allowing you to add borders, glitch effects, pixelated, noise, or segmentation video effects.

Conclusion

Glass-breaking sound effects are a great way to give your video or project some real, dramatic flair. These sounds for free online. Do an internet search, and you’ll come up with plenty of sites that offer them as downloads. Note that not all of those websites will be completely free; those that only provide their glass-breaking sounds for certain uses may charge a fee after using it more than a certain number of times.

Filmora is a video editing program that’s simple enough for beginners but powerful enough to satisfy even the most advanced editors. With features like manual mode and glass-breaking sound effects, you can easily create videos. Hope this article helps you with collecting glass breaking/shattering sound effects and adding them into videos using Filmora.

Also read: