Perfecting Your Mac’s Audio Capabilities: 5 Must-Know Techniques to Record High-Quality Sounds

Mac offers a smooth workflow compared to Windows, which is why people prefer its usage. If your work revolves around music production, podcasts, recorded lectures in a classroom, and audio mixing, it is important to have workable audio recording software for Mac. To record Mac audio through an easy set of procedures, follow the write-up.

We shall also introduce five voice recorders, Mac. So, let us begin!

In this article

01 How to Record Audio on Mac?

02 5 Best Voice Recorder Software for Mac

Part 1: How to Record Audio on Mac?

If you are a Mac user, this sub-section has been designed for you. If you are taking a voice class or an influencer interview, you need to know Mac how to record audio. The two strategies would be covered to record voice on Mac. Let us start!

Via Voice Memos

Voice Memos is an in-built app on most Apple devices. The guidelines to record sound on Mac through Voice Memos are as given below:

Step 1: Visiting Voice Memos

Launch Voice Memos from your Mac. As the interface appears, the user would be welcomed with the “Red” record button. Tap on it, and the recording would start without any prompt.

Step 2: Pausing the Recording

The lower-left corner displays the pause button. Click on it once you are done. Essentially, you can have a little preview of what you have covered so far.

Step 3: Saving Process

Click on “Done,” located in the bottom right corner. Rename the file and get done with the process.

Via QuickTime Player

QuickTime Player is the default program in Mac that acts as both media player and voice recorder. To know how to record internal audio Mac, let us walk you through the multiple steps. You’ll surely get something good out of it!

Step 1: Starting the Recording

For starters, launch QuickTime Player and navigate to the “File” located in the top panel. Select “New Audio Recording” from there. Click on the “Red” button to initiate the recording.

Step 2: Stopping the Recording

Once you are done with the recording, click on the grey square to stop the recording. There is no option to pause the recording temporarily.

Step 3: Saving the Recording

Navigate to the “File” tab again and click on “Save.” Choose the name of the recording and the output folder source.

Part 2: 5 Best Voice Recorder Software for Mac

Now that you have an idea of the procedure to record an internal audio recorder Mac let us shift our focus to audio recording software for Mac. The choice of the tool helps the user be productive at the workplace. Therefore, we have sketched out five MacBook voice recorders with their key features. Let us have a peek!

Apple GarageBand

As a digital audio workstation, Apple GarageBand has to be your first choice for music production. It is a fully-fledged audio recorder with an easy-to-use interface. The sound and loop library allows you to edit your tracks. Moreover, the interactive interface makes its usage easy for beginners.

Are you impressed with the tool? Following are some features of this audio recording software for Mac:

• Apple GarageBand comes up with a drag and drop process to make recording easy.
• Offering an extensive range of effects and virtual amps, Apple GarageBand supports MIDI recording and editing.
• The tool offers a professional environment for all music and audio recording services, free of cost.

Audacity

Another software to record system audio Mac is Audacity creating a healthy addition to the media fraternity. Acting as a multi-track editor, Audacity supports 24, 16, and 32 bit sound qualities for a better editing system. It is a free audio recording program with great sound quality and tons of effects. The advanced effects include voice generation, noise removal, and track-based management.

Quite good, right? The additional features of Audacity are as given below:

• Audacity works like a charm for pitch correction.
• There are enhanced highly customizable editing tools.
• You can also visualize selected frequencies and offers effective plugins.

WavePad

Changing the narrative of voice recorders in the market and ensuring high-quality audio, WavePad has got you all covered. The sound editing tools comprise cutting, copying, inserting, silencing, auto-trimming, pitch shifting, and much more. Moreover, this audio recording software for Mac has DirectX and Virtual Studio Technology (VST) plugin support to bring more advancement to the process.

Following are some extraordinary characteristics of WavePad. You will be surprised!

• The audio enhancing compatibilities include amplification and effects added.
• WavePad gives the user a certain control over their work domain.
• With an easy-to-use interface, the advanced tools include spectral analysis (FTT), speech synthesis, and voice changer.

MixPad

Allow me to introduce you to another voice recorder Mac that also handles multi-track mixing like a pro. An exclusive beat maker, music library, and supports VST plugin, MixPad can be relied upon for adding different audio effects. The effects include equalization, compression, and reverb. More importantly, it has a low latency rate and supports cloud storage impeccably.

Following are some detailed key features of MixPad audio recording software for Mac. See the best out of it!

• The multiple or single track can be processed simultaneously, thus enhancing the user experience and productivity at the workplace.
• The program works effectively with all formats, which makes importing easy and free of complications.
• The MIDI Editor is presented, and the audio output can be uploaded to YouTube, Soundcloud, Dropbox, and Google Drive.

Ocenaudio

Bringing innovation in business and acting as a voice recorder and editor, Ocenaudio needs no introduction. The users prefer this tool to record Mac audio while editing and analyzing the audio files like an expert. The real-time preview of effects helps you decide easily without getting confused in the process. Ocenaudio is your last resort for the standardization of audio files.

To have a quick peek at the exceptional features of Ocenaudio, follow our lead. You won’t be disappointed!

• The Ocen framework is integrated with Ocenaudio to have access to enhanced capabilities.
• The auto-trim and voice recording controls help beginners and professionals work more confidently.
• The software offers a waveform view without any restriction on the audio size.

The Bottom Line

The article did an impeccable job explaining five popular audio recording software for Mac that record Mac audio like a pro. Their key traits were also described to help the stakeholders make a conscious decision. The procedure to record voice on Mac was also provided through two strategies. Got the point, right?

Wondershare Filmora is the right choice when it comes to audio editing. The functions and features it offers make the process frictionless and effortless. For instance, you can add effects and music to the audio without any hesitation. The “Adjust Audio” functionality helps adjust the audio’s volume. You can also get rid of the background noise through “Audio Denoise.”

Moreover, the “Audio Ducking” feature lowers the background volume so that the dialogues can be heard more perfectly. The “Split Audio” splits the audio into different sections. You can also use the “Audio Mixer” to fine-tune the audio of your project easily. Review the different features and invest in the right software to have all required features under one platform.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

02 5 Best Voice Recorder Software for Mac

Part 1: How to Record Audio on Mac?

If you are a Mac user, this sub-section has been designed for you. If you are taking a voice class or an influencer interview, you need to know Mac how to record audio. The two strategies would be covered to record voice on Mac. Let us start!

Via Voice Memos

Voice Memos is an in-built app on most Apple devices. The guidelines to record sound on Mac through Voice Memos are as given below:

Step 1: Visiting Voice Memos

Launch Voice Memos from your Mac. As the interface appears, the user would be welcomed with the “Red” record button. Tap on it, and the recording would start without any prompt.

Step 2: Pausing the Recording

The lower-left corner displays the pause button. Click on it once you are done. Essentially, you can have a little preview of what you have covered so far.

Step 3: Saving Process

Click on “Done,” located in the bottom right corner. Rename the file and get done with the process.

Via QuickTime Player

QuickTime Player is the default program in Mac that acts as both media player and voice recorder. To know how to record internal audio Mac, let us walk you through the multiple steps. You’ll surely get something good out of it!

Step 1: Starting the Recording

For starters, launch QuickTime Player and navigate to the “File” located in the top panel. Select “New Audio Recording” from there. Click on the “Red” button to initiate the recording.

Step 2: Stopping the Recording

Once you are done with the recording, click on the grey square to stop the recording. There is no option to pause the recording temporarily.

Step 3: Saving the Recording

Navigate to the “File” tab again and click on “Save.” Choose the name of the recording and the output folder source.

Part 2: 5 Best Voice Recorder Software for Mac

Now that you have an idea of the procedure to record an internal audio recorder Mac let us shift our focus to audio recording software for Mac. The choice of the tool helps the user be productive at the workplace. Therefore, we have sketched out five MacBook voice recorders with their key features. Let us have a peek!

Apple GarageBand

As a digital audio workstation, Apple GarageBand has to be your first choice for music production. It is a fully-fledged audio recorder with an easy-to-use interface. The sound and loop library allows you to edit your tracks. Moreover, the interactive interface makes its usage easy for beginners.

Are you impressed with the tool? Following are some features of this audio recording software for Mac:

• Apple GarageBand comes up with a drag and drop process to make recording easy.
• Offering an extensive range of effects and virtual amps, Apple GarageBand supports MIDI recording and editing.
• The tool offers a professional environment for all music and audio recording services, free of cost.

Audacity

Another software to record system audio Mac is Audacity creating a healthy addition to the media fraternity. Acting as a multi-track editor, Audacity supports 24, 16, and 32 bit sound qualities for a better editing system. It is a free audio recording program with great sound quality and tons of effects. The advanced effects include voice generation, noise removal, and track-based management.

Quite good, right? The additional features of Audacity are as given below:

• Audacity works like a charm for pitch correction.
• There are enhanced highly customizable editing tools.
• You can also visualize selected frequencies and offers effective plugins.

WavePad

Changing the narrative of voice recorders in the market and ensuring high-quality audio, WavePad has got you all covered. The sound editing tools comprise cutting, copying, inserting, silencing, auto-trimming, pitch shifting, and much more. Moreover, this audio recording software for Mac has DirectX and Virtual Studio Technology (VST) plugin support to bring more advancement to the process.

Following are some extraordinary characteristics of WavePad. You will be surprised!

• The audio enhancing compatibilities include amplification and effects added.
• WavePad gives the user a certain control over their work domain.
• With an easy-to-use interface, the advanced tools include spectral analysis (FTT), speech synthesis, and voice changer.

MixPad

Allow me to introduce you to another voice recorder Mac that also handles multi-track mixing like a pro. An exclusive beat maker, music library, and supports VST plugin, MixPad can be relied upon for adding different audio effects. The effects include equalization, compression, and reverb. More importantly, it has a low latency rate and supports cloud storage impeccably.

Following are some detailed key features of MixPad audio recording software for Mac. See the best out of it!

• The multiple or single track can be processed simultaneously, thus enhancing the user experience and productivity at the workplace.
• The program works effectively with all formats, which makes importing easy and free of complications.
• The MIDI Editor is presented, and the audio output can be uploaded to YouTube, Soundcloud, Dropbox, and Google Drive.

Ocenaudio

Bringing innovation in business and acting as a voice recorder and editor, Ocenaudio needs no introduction. The users prefer this tool to record Mac audio while editing and analyzing the audio files like an expert. The real-time preview of effects helps you decide easily without getting confused in the process. Ocenaudio is your last resort for the standardization of audio files.

To have a quick peek at the exceptional features of Ocenaudio, follow our lead. You won’t be disappointed!

• The Ocen framework is integrated with Ocenaudio to have access to enhanced capabilities.
• The auto-trim and voice recording controls help beginners and professionals work more confidently.
• The software offers a waveform view without any restriction on the audio size.

The Bottom Line

The article did an impeccable job explaining five popular audio recording software for Mac that record Mac audio like a pro. Their key traits were also described to help the stakeholders make a conscious decision. The procedure to record voice on Mac was also provided through two strategies. Got the point, right?

Wondershare Filmora is the right choice when it comes to audio editing. The functions and features it offers make the process frictionless and effortless. For instance, you can add effects and music to the audio without any hesitation. The “Adjust Audio” functionality helps adjust the audio’s volume. You can also get rid of the background noise through “Audio Denoise.”

Moreover, the “Audio Ducking” feature lowers the background volume so that the dialogues can be heard more perfectly. The “Split Audio” splits the audio into different sections. You can also use the “Audio Mixer” to fine-tune the audio of your project easily. Review the different features and invest in the right software to have all required features under one platform.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

02 5 Best Voice Recorder Software for Mac

Part 1: How to Record Audio on Mac?

If you are a Mac user, this sub-section has been designed for you. If you are taking a voice class or an influencer interview, you need to know Mac how to record audio. The two strategies would be covered to record voice on Mac. Let us start!

Via Voice Memos

Voice Memos is an in-built app on most Apple devices. The guidelines to record sound on Mac through Voice Memos are as given below:

Step 1: Visiting Voice Memos

Launch Voice Memos from your Mac. As the interface appears, the user would be welcomed with the “Red” record button. Tap on it, and the recording would start without any prompt.

Step 2: Pausing the Recording

The lower-left corner displays the pause button. Click on it once you are done. Essentially, you can have a little preview of what you have covered so far.

Step 3: Saving Process

Click on “Done,” located in the bottom right corner. Rename the file and get done with the process.

Via QuickTime Player

QuickTime Player is the default program in Mac that acts as both media player and voice recorder. To know how to record internal audio Mac, let us walk you through the multiple steps. You’ll surely get something good out of it!

Step 1: Starting the Recording

For starters, launch QuickTime Player and navigate to the “File” located in the top panel. Select “New Audio Recording” from there. Click on the “Red” button to initiate the recording.

Step 2: Stopping the Recording

Once you are done with the recording, click on the grey square to stop the recording. There is no option to pause the recording temporarily.

Step 3: Saving the Recording

Navigate to the “File” tab again and click on “Save.” Choose the name of the recording and the output folder source.

Part 2: 5 Best Voice Recorder Software for Mac

Now that you have an idea of the procedure to record an internal audio recorder Mac let us shift our focus to audio recording software for Mac. The choice of the tool helps the user be productive at the workplace. Therefore, we have sketched out five MacBook voice recorders with their key features. Let us have a peek!

Apple GarageBand

As a digital audio workstation, Apple GarageBand has to be your first choice for music production. It is a fully-fledged audio recorder with an easy-to-use interface. The sound and loop library allows you to edit your tracks. Moreover, the interactive interface makes its usage easy for beginners.

Are you impressed with the tool? Following are some features of this audio recording software for Mac:

• Apple GarageBand comes up with a drag and drop process to make recording easy.
• Offering an extensive range of effects and virtual amps, Apple GarageBand supports MIDI recording and editing.
• The tool offers a professional environment for all music and audio recording services, free of cost.

Audacity

Another software to record system audio Mac is Audacity creating a healthy addition to the media fraternity. Acting as a multi-track editor, Audacity supports 24, 16, and 32 bit sound qualities for a better editing system. It is a free audio recording program with great sound quality and tons of effects. The advanced effects include voice generation, noise removal, and track-based management.

Quite good, right? The additional features of Audacity are as given below:

• Audacity works like a charm for pitch correction.
• There are enhanced highly customizable editing tools.
• You can also visualize selected frequencies and offers effective plugins.

WavePad

Changing the narrative of voice recorders in the market and ensuring high-quality audio, WavePad has got you all covered. The sound editing tools comprise cutting, copying, inserting, silencing, auto-trimming, pitch shifting, and much more. Moreover, this audio recording software for Mac has DirectX and Virtual Studio Technology (VST) plugin support to bring more advancement to the process.

Following are some extraordinary characteristics of WavePad. You will be surprised!

• The audio enhancing compatibilities include amplification and effects added.
• WavePad gives the user a certain control over their work domain.
• With an easy-to-use interface, the advanced tools include spectral analysis (FTT), speech synthesis, and voice changer.

MixPad

Allow me to introduce you to another voice recorder Mac that also handles multi-track mixing like a pro. An exclusive beat maker, music library, and supports VST plugin, MixPad can be relied upon for adding different audio effects. The effects include equalization, compression, and reverb. More importantly, it has a low latency rate and supports cloud storage impeccably.

Following are some detailed key features of MixPad audio recording software for Mac. See the best out of it!

• The multiple or single track can be processed simultaneously, thus enhancing the user experience and productivity at the workplace.
• The program works effectively with all formats, which makes importing easy and free of complications.
• The MIDI Editor is presented, and the audio output can be uploaded to YouTube, Soundcloud, Dropbox, and Google Drive.

Ocenaudio

Bringing innovation in business and acting as a voice recorder and editor, Ocenaudio needs no introduction. The users prefer this tool to record Mac audio while editing and analyzing the audio files like an expert. The real-time preview of effects helps you decide easily without getting confused in the process. Ocenaudio is your last resort for the standardization of audio files.

To have a quick peek at the exceptional features of Ocenaudio, follow our lead. You won’t be disappointed!

• The Ocen framework is integrated with Ocenaudio to have access to enhanced capabilities.
• The auto-trim and voice recording controls help beginners and professionals work more confidently.
• The software offers a waveform view without any restriction on the audio size.

The Bottom Line

The article did an impeccable job explaining five popular audio recording software for Mac that record Mac audio like a pro. Their key traits were also described to help the stakeholders make a conscious decision. The procedure to record voice on Mac was also provided through two strategies. Got the point, right?

Wondershare Filmora is the right choice when it comes to audio editing. The functions and features it offers make the process frictionless and effortless. For instance, you can add effects and music to the audio without any hesitation. The “Adjust Audio” functionality helps adjust the audio’s volume. You can also get rid of the background noise through “Audio Denoise.”

Moreover, the “Audio Ducking” feature lowers the background volume so that the dialogues can be heard more perfectly. The “Split Audio” splits the audio into different sections. You can also use the “Audio Mixer” to fine-tune the audio of your project easily. Review the different features and invest in the right software to have all required features under one platform.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

02 5 Best Voice Recorder Software for Mac

Part 1: How to Record Audio on Mac?

If you are a Mac user, this sub-section has been designed for you. If you are taking a voice class or an influencer interview, you need to know Mac how to record audio. The two strategies would be covered to record voice on Mac. Let us start!

Via Voice Memos

Voice Memos is an in-built app on most Apple devices. The guidelines to record sound on Mac through Voice Memos are as given below:

Step 1: Visiting Voice Memos

Launch Voice Memos from your Mac. As the interface appears, the user would be welcomed with the “Red” record button. Tap on it, and the recording would start without any prompt.

Step 2: Pausing the Recording

The lower-left corner displays the pause button. Click on it once you are done. Essentially, you can have a little preview of what you have covered so far.

Step 3: Saving Process

Click on “Done,” located in the bottom right corner. Rename the file and get done with the process.

Via QuickTime Player

QuickTime Player is the default program in Mac that acts as both media player and voice recorder. To know how to record internal audio Mac, let us walk you through the multiple steps. You’ll surely get something good out of it!

Step 1: Starting the Recording

For starters, launch QuickTime Player and navigate to the “File” located in the top panel. Select “New Audio Recording” from there. Click on the “Red” button to initiate the recording.

Step 2: Stopping the Recording

Once you are done with the recording, click on the grey square to stop the recording. There is no option to pause the recording temporarily.

Step 3: Saving the Recording

Navigate to the “File” tab again and click on “Save.” Choose the name of the recording and the output folder source.

Part 2: 5 Best Voice Recorder Software for Mac

Now that you have an idea of the procedure to record an internal audio recorder Mac let us shift our focus to audio recording software for Mac. The choice of the tool helps the user be productive at the workplace. Therefore, we have sketched out five MacBook voice recorders with their key features. Let us have a peek!

Apple GarageBand

As a digital audio workstation, Apple GarageBand has to be your first choice for music production. It is a fully-fledged audio recorder with an easy-to-use interface. The sound and loop library allows you to edit your tracks. Moreover, the interactive interface makes its usage easy for beginners.

Are you impressed with the tool? Following are some features of this audio recording software for Mac:

• Apple GarageBand comes up with a drag and drop process to make recording easy.
• Offering an extensive range of effects and virtual amps, Apple GarageBand supports MIDI recording and editing.
• The tool offers a professional environment for all music and audio recording services, free of cost.

Audacity

Another software to record system audio Mac is Audacity creating a healthy addition to the media fraternity. Acting as a multi-track editor, Audacity supports 24, 16, and 32 bit sound qualities for a better editing system. It is a free audio recording program with great sound quality and tons of effects. The advanced effects include voice generation, noise removal, and track-based management.

Quite good, right? The additional features of Audacity are as given below:

• Audacity works like a charm for pitch correction.
• There are enhanced highly customizable editing tools.
• You can also visualize selected frequencies and offers effective plugins.

WavePad

Changing the narrative of voice recorders in the market and ensuring high-quality audio, WavePad has got you all covered. The sound editing tools comprise cutting, copying, inserting, silencing, auto-trimming, pitch shifting, and much more. Moreover, this audio recording software for Mac has DirectX and Virtual Studio Technology (VST) plugin support to bring more advancement to the process.

Following are some extraordinary characteristics of WavePad. You will be surprised!

• The audio enhancing compatibilities include amplification and effects added.
• WavePad gives the user a certain control over their work domain.
• With an easy-to-use interface, the advanced tools include spectral analysis (FTT), speech synthesis, and voice changer.

MixPad

Allow me to introduce you to another voice recorder Mac that also handles multi-track mixing like a pro. An exclusive beat maker, music library, and supports VST plugin, MixPad can be relied upon for adding different audio effects. The effects include equalization, compression, and reverb. More importantly, it has a low latency rate and supports cloud storage impeccably.

Following are some detailed key features of MixPad audio recording software for Mac. See the best out of it!

• The multiple or single track can be processed simultaneously, thus enhancing the user experience and productivity at the workplace.
• The program works effectively with all formats, which makes importing easy and free of complications.
• The MIDI Editor is presented, and the audio output can be uploaded to YouTube, Soundcloud, Dropbox, and Google Drive.

Ocenaudio

Bringing innovation in business and acting as a voice recorder and editor, Ocenaudio needs no introduction. The users prefer this tool to record Mac audio while editing and analyzing the audio files like an expert. The real-time preview of effects helps you decide easily without getting confused in the process. Ocenaudio is your last resort for the standardization of audio files.

To have a quick peek at the exceptional features of Ocenaudio, follow our lead. You won’t be disappointed!

• The Ocen framework is integrated with Ocenaudio to have access to enhanced capabilities.
• The auto-trim and voice recording controls help beginners and professionals work more confidently.
• The software offers a waveform view without any restriction on the audio size.

The Bottom Line

The article did an impeccable job explaining five popular audio recording software for Mac that record Mac audio like a pro. Their key traits were also described to help the stakeholders make a conscious decision. The procedure to record voice on Mac was also provided through two strategies. Got the point, right?

Wondershare Filmora is the right choice when it comes to audio editing. The functions and features it offers make the process frictionless and effortless. For instance, you can add effects and music to the audio without any hesitation. The “Adjust Audio” functionality helps adjust the audio’s volume. You can also get rid of the background noise through “Audio Denoise.”

Moreover, the “Audio Ducking” feature lowers the background volume so that the dialogues can be heard more perfectly. The “Split Audio” splits the audio into different sections. You can also use the “Audio Mixer” to fine-tune the audio of your project easily. Review the different features and invest in the right software to have all required features under one platform.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Mastering Free Audio Recording: Using Audacity’s Capabilities

Natural audio recording software, such as Voice Memos for Macs or Sound Recorder for Windows PCs, is included with every machine. These applications enable users to record audio using either the desktop’s internal or an external microphone, and they generally have basic audio editing features.

However, when you’re looking for a higher-quality recording program, Audacity is the way to go. Audacity is a free audio editor with a lot of cutting-edge features. More significantly, recording using Audacity is as simple as clicking a button.

In this Audacity Record Computer Audio guide, we will show you all the methods of recording internal audio on your computer and Mac.

In this article

01 Record Audio On Audacity with a Microphone

02 Record Sounds Playing on Your Computer Using Audacity on Win

03 Record Sounds Playing on Your Computer Using Audacity on Mac

04 Set up Audacity to Record as Schedule

Part 1: How to Record Audio On Audacity with a Microphone On Windows and Mac Computers?

For both Windows and Mac, the procedures for recording audio from a microphone are the same if you’re utilizing your desktop’s built-in mic or an external microphone. Here’s your step-by-step guide to audacity record using a microphone:

Step 1: Launch Audacity and get to know the Device Toolbar, situated underneath the playback controls. You may modify the Audio Host and the Recording and Playback Devices—all of which are required for Audacity recording.

Step 2: To begin, select Tracks under the Add New tab, Stereo Track, or Mono Track to create a new track.

Step 3: Select Recording Device from the options list. Select your microphone from the dropdown menu and hit the Record option.

Step 4: A soundwave emerges along the track as you talk into the speaker. The Recording Level may be found at the top of the display. To pause or stop the recording, click Stop or Pause until you select Record anew.

Step 5: With the mouse over any recording area, click the Delete button to cut out any portion of it quickly. Click Ctrl + A, then Delete to erase whatever you’ve just saved. Alternatively, press the X button to delete the track completely.

Part 2: How to Record Sounds Playing on Your Computer Using Audacity On Windows?

Unlike Mac, Windows makes it simple to capture audio from a movie or media file running on your desktop. There seem to be two primary methods for accomplishing audacity record desktop audio in this way:

1. Use MME as the Audio Host

Step 1: To use MME as your audio host, go to Tracks in the Add New tab in Stereo Track and create a new file.

Step 2: Change the Audio Host (to the left of Recording Device) to MME—this is the standard setting, so you might not have to change anything.

Step 3: Choose desired option from the Recording Device dropdown menu. Based on your configuration, this might be referred to as Wave Out or Loopback. When you’re uncertain, try it out.

Step 4: To record your audio source, click Record, then play it back.

2. Use WASAPI as the Audio Host

WASAPI provides higher-resolution digital recordings. If capturing audio from an external monitor, it’s also a good idea to utilize it.

Step 1: Convert the Audio Host from MME to Windows WASAPI after creating a fresh Stereo Track.

Step 2: Switch the Recording Device to Speaker (loopback). To display the entire label, you might have to slide the toolbar’s knobs outwards. Begin recording by pressing the red dot and then listen to the audio source. Audacity will capture the audio even if your PC is muted.

Part 3: How to Record Sounds Playing on Your Computer Using Audacity on Mac?

Unfortunately, there’s no ready-made method to record computer audio using Audacity on a Mac. Some alternative ways to use Audacity to record from Mac including using a loopback cable, or download and using a third-party software. You can try some Audacity alternatives to record the computer audio on Mac.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

If you have installed Filmora already, you can use it to record the sound playing on your Mac with some tricks.

Step 1: Luanch Filmora, and then click the Record button and select Record PC Screen.

Step 2: Set up the recording settings based on the need. Since we’re going to record the playing audio from the Mac computer, select Microphone and System Audio On and click the Red button to start.

Step 3: Now you have a screen captured video with sound included. Since we need th audio only, we can attache the audio from the video first and then do some editing such as adding fade in and fade out effect, or remove unwanted audio clip.

Part 4: How to Set up Audacity to Record as Schedule?

A streaming video recorder or cassette can be used to arrange a recording. All of those are identical to Time Recordings in that they are used to schedule recording. The Timer record configuration dialog box may be used to set the beginning and finish of the recording. This is how you do it:

Step 1: By definition, the recording’s Start Date and Time are set to the present time. It will begin recording on the present day and hour by default when you don’t alter it. There is no default setting for the End Date and Time. You must either choose a date and time to determine the end time.

Step 2: There is a Checkbox to Save the work immediately. By Ticking the option, you may choose the path or Folder where the file will be saved when the recording is finished.

Conclusion

Well, there you have it – your complete Audacity Record Computer Audio guide. One thing is for certain that Audacity allows some great ways of recording audio from internal and external components of your Windows and Mac. However, if your Audacity is having issues, we would highly recommend opting for another software, such as Wondershare Filmora.

Wondershare Filmora is the finest thing that has come out in recent years for recording audio from a desktop. It is intended not just for pros but also for any enthusiast videographer who desires to create a high-quality movie for their family and friends. Download it today to make your movie a delightful journey with high-quality audio recording.

02 Record Sounds Playing on Your Computer Using Audacity on Win

03 Record Sounds Playing on Your Computer Using Audacity on Mac

04 Set up Audacity to Record as Schedule

Part 1: How to Record Audio On Audacity with a Microphone On Windows and Mac Computers?

For both Windows and Mac, the procedures for recording audio from a microphone are the same if you’re utilizing your desktop’s built-in mic or an external microphone. Here’s your step-by-step guide to audacity record using a microphone:

Step 1: Launch Audacity and get to know the Device Toolbar, situated underneath the playback controls. You may modify the Audio Host and the Recording and Playback Devices—all of which are required for Audacity recording.

Step 2: To begin, select Tracks under the Add New tab, Stereo Track, or Mono Track to create a new track.

Step 3: Select Recording Device from the options list. Select your microphone from the dropdown menu and hit the Record option.

Step 4: A soundwave emerges along the track as you talk into the speaker. The Recording Level may be found at the top of the display. To pause or stop the recording, click Stop or Pause until you select Record anew.

Step 5: With the mouse over any recording area, click the Delete button to cut out any portion of it quickly. Click Ctrl + A, then Delete to erase whatever you’ve just saved. Alternatively, press the X button to delete the track completely.

Part 2: How to Record Sounds Playing on Your Computer Using Audacity On Windows?

Unlike Mac, Windows makes it simple to capture audio from a movie or media file running on your desktop. There seem to be two primary methods for accomplishing audacity record desktop audio in this way:

1. Use MME as the Audio Host

Step 1: To use MME as your audio host, go to Tracks in the Add New tab in Stereo Track and create a new file.

Step 2: Change the Audio Host (to the left of Recording Device) to MME—this is the standard setting, so you might not have to change anything.

Step 3: Choose desired option from the Recording Device dropdown menu. Based on your configuration, this might be referred to as Wave Out or Loopback. When you’re uncertain, try it out.

Step 4: To record your audio source, click Record, then play it back.

2. Use WASAPI as the Audio Host

WASAPI provides higher-resolution digital recordings. If capturing audio from an external monitor, it’s also a good idea to utilize it.

Step 1: Convert the Audio Host from MME to Windows WASAPI after creating a fresh Stereo Track.

Step 2: Switch the Recording Device to Speaker (loopback). To display the entire label, you might have to slide the toolbar’s knobs outwards. Begin recording by pressing the red dot and then listen to the audio source. Audacity will capture the audio even if your PC is muted.

Part 3: How to Record Sounds Playing on Your Computer Using Audacity on Mac?

Unfortunately, there’s no ready-made method to record computer audio using Audacity on a Mac. Some alternative ways to use Audacity to record from Mac including using a loopback cable, or download and using a third-party software. You can try some Audacity alternatives to record the computer audio on Mac.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

If you have installed Filmora already, you can use it to record the sound playing on your Mac with some tricks.

Step 1: Luanch Filmora, and then click the Record button and select Record PC Screen.

Step 2: Set up the recording settings based on the need. Since we’re going to record the playing audio from the Mac computer, select Microphone and System Audio On and click the Red button to start.

Step 3: Now you have a screen captured video with sound included. Since we need th audio only, we can attache the audio from the video first and then do some editing such as adding fade in and fade out effect, or remove unwanted audio clip.

Part 4: How to Set up Audacity to Record as Schedule?

A streaming video recorder or cassette can be used to arrange a recording. All of those are identical to Time Recordings in that they are used to schedule recording. The Timer record configuration dialog box may be used to set the beginning and finish of the recording. This is how you do it:

Step 1: By definition, the recording’s Start Date and Time are set to the present time. It will begin recording on the present day and hour by default when you don’t alter it. There is no default setting for the End Date and Time. You must either choose a date and time to determine the end time.

Step 2: There is a Checkbox to Save the work immediately. By Ticking the option, you may choose the path or Folder where the file will be saved when the recording is finished.

Conclusion

Well, there you have it – your complete Audacity Record Computer Audio guide. One thing is for certain that Audacity allows some great ways of recording audio from internal and external components of your Windows and Mac. However, if your Audacity is having issues, we would highly recommend opting for another software, such as Wondershare Filmora.

Wondershare Filmora is the finest thing that has come out in recent years for recording audio from a desktop. It is intended not just for pros but also for any enthusiast videographer who desires to create a high-quality movie for their family and friends. Download it today to make your movie a delightful journey with high-quality audio recording.

02 Record Sounds Playing on Your Computer Using Audacity on Win

03 Record Sounds Playing on Your Computer Using Audacity on Mac

04 Set up Audacity to Record as Schedule

Part 1: How to Record Audio On Audacity with a Microphone On Windows and Mac Computers?

For both Windows and Mac, the procedures for recording audio from a microphone are the same if you’re utilizing your desktop’s built-in mic or an external microphone. Here’s your step-by-step guide to audacity record using a microphone:

Step 1: Launch Audacity and get to know the Device Toolbar, situated underneath the playback controls. You may modify the Audio Host and the Recording and Playback Devices—all of which are required for Audacity recording.

Step 2: To begin, select Tracks under the Add New tab, Stereo Track, or Mono Track to create a new track.

Step 3: Select Recording Device from the options list. Select your microphone from the dropdown menu and hit the Record option.

Step 4: A soundwave emerges along the track as you talk into the speaker. The Recording Level may be found at the top of the display. To pause or stop the recording, click Stop or Pause until you select Record anew.

Step 5: With the mouse over any recording area, click the Delete button to cut out any portion of it quickly. Click Ctrl + A, then Delete to erase whatever you’ve just saved. Alternatively, press the X button to delete the track completely.

Part 2: How to Record Sounds Playing on Your Computer Using Audacity On Windows?

Unlike Mac, Windows makes it simple to capture audio from a movie or media file running on your desktop. There seem to be two primary methods for accomplishing audacity record desktop audio in this way:

1. Use MME as the Audio Host

Step 1: To use MME as your audio host, go to Tracks in the Add New tab in Stereo Track and create a new file.

Step 2: Change the Audio Host (to the left of Recording Device) to MME—this is the standard setting, so you might not have to change anything.

Step 3: Choose desired option from the Recording Device dropdown menu. Based on your configuration, this might be referred to as Wave Out or Loopback. When you’re uncertain, try it out.

Step 4: To record your audio source, click Record, then play it back.

2. Use WASAPI as the Audio Host

WASAPI provides higher-resolution digital recordings. If capturing audio from an external monitor, it’s also a good idea to utilize it.

Step 1: Convert the Audio Host from MME to Windows WASAPI after creating a fresh Stereo Track.

Step 2: Switch the Recording Device to Speaker (loopback). To display the entire label, you might have to slide the toolbar’s knobs outwards. Begin recording by pressing the red dot and then listen to the audio source. Audacity will capture the audio even if your PC is muted.

Part 3: How to Record Sounds Playing on Your Computer Using Audacity on Mac?

Unfortunately, there’s no ready-made method to record computer audio using Audacity on a Mac. Some alternative ways to use Audacity to record from Mac including using a loopback cable, or download and using a third-party software. You can try some Audacity alternatives to record the computer audio on Mac.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

If you have installed Filmora already, you can use it to record the sound playing on your Mac with some tricks.

Step 1: Luanch Filmora, and then click the Record button and select Record PC Screen.

Step 2: Set up the recording settings based on the need. Since we’re going to record the playing audio from the Mac computer, select Microphone and System Audio On and click the Red button to start.

Step 3: Now you have a screen captured video with sound included. Since we need th audio only, we can attache the audio from the video first and then do some editing such as adding fade in and fade out effect, or remove unwanted audio clip.

Part 4: How to Set up Audacity to Record as Schedule?

A streaming video recorder or cassette can be used to arrange a recording. All of those are identical to Time Recordings in that they are used to schedule recording. The Timer record configuration dialog box may be used to set the beginning and finish of the recording. This is how you do it:

Step 1: By definition, the recording’s Start Date and Time are set to the present time. It will begin recording on the present day and hour by default when you don’t alter it. There is no default setting for the End Date and Time. You must either choose a date and time to determine the end time.

Step 2: There is a Checkbox to Save the work immediately. By Ticking the option, you may choose the path or Folder where the file will be saved when the recording is finished.

Conclusion

Well, there you have it – your complete Audacity Record Computer Audio guide. One thing is for certain that Audacity allows some great ways of recording audio from internal and external components of your Windows and Mac. However, if your Audacity is having issues, we would highly recommend opting for another software, such as Wondershare Filmora.

Wondershare Filmora is the finest thing that has come out in recent years for recording audio from a desktop. It is intended not just for pros but also for any enthusiast videographer who desires to create a high-quality movie for their family and friends. Download it today to make your movie a delightful journey with high-quality audio recording.

02 Record Sounds Playing on Your Computer Using Audacity on Win

03 Record Sounds Playing on Your Computer Using Audacity on Mac

04 Set up Audacity to Record as Schedule

Part 1: How to Record Audio On Audacity with a Microphone On Windows and Mac Computers?

For both Windows and Mac, the procedures for recording audio from a microphone are the same if you’re utilizing your desktop’s built-in mic or an external microphone. Here’s your step-by-step guide to audacity record using a microphone:

Step 1: Launch Audacity and get to know the Device Toolbar, situated underneath the playback controls. You may modify the Audio Host and the Recording and Playback Devices—all of which are required for Audacity recording.

Step 2: To begin, select Tracks under the Add New tab, Stereo Track, or Mono Track to create a new track.

Step 3: Select Recording Device from the options list. Select your microphone from the dropdown menu and hit the Record option.

Step 4: A soundwave emerges along the track as you talk into the speaker. The Recording Level may be found at the top of the display. To pause or stop the recording, click Stop or Pause until you select Record anew.

Step 5: With the mouse over any recording area, click the Delete button to cut out any portion of it quickly. Click Ctrl + A, then Delete to erase whatever you’ve just saved. Alternatively, press the X button to delete the track completely.

Part 2: How to Record Sounds Playing on Your Computer Using Audacity On Windows?

Unlike Mac, Windows makes it simple to capture audio from a movie or media file running on your desktop. There seem to be two primary methods for accomplishing audacity record desktop audio in this way:

1. Use MME as the Audio Host

Step 1: To use MME as your audio host, go to Tracks in the Add New tab in Stereo Track and create a new file.

Step 2: Change the Audio Host (to the left of Recording Device) to MME—this is the standard setting, so you might not have to change anything.

Step 3: Choose desired option from the Recording Device dropdown menu. Based on your configuration, this might be referred to as Wave Out or Loopback. When you’re uncertain, try it out.

Step 4: To record your audio source, click Record, then play it back.

2. Use WASAPI as the Audio Host

WASAPI provides higher-resolution digital recordings. If capturing audio from an external monitor, it’s also a good idea to utilize it.

Step 1: Convert the Audio Host from MME to Windows WASAPI after creating a fresh Stereo Track.

Step 2: Switch the Recording Device to Speaker (loopback). To display the entire label, you might have to slide the toolbar’s knobs outwards. Begin recording by pressing the red dot and then listen to the audio source. Audacity will capture the audio even if your PC is muted.

Part 3: How to Record Sounds Playing on Your Computer Using Audacity on Mac?

Unfortunately, there’s no ready-made method to record computer audio using Audacity on a Mac. Some alternative ways to use Audacity to record from Mac including using a loopback cable, or download and using a third-party software. You can try some Audacity alternatives to record the computer audio on Mac.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

If you have installed Filmora already, you can use it to record the sound playing on your Mac with some tricks.

Step 1: Luanch Filmora, and then click the Record button and select Record PC Screen.

Step 2: Set up the recording settings based on the need. Since we’re going to record the playing audio from the Mac computer, select Microphone and System Audio On and click the Red button to start.

Step 3: Now you have a screen captured video with sound included. Since we need th audio only, we can attache the audio from the video first and then do some editing such as adding fade in and fade out effect, or remove unwanted audio clip.

Part 4: How to Set up Audacity to Record as Schedule?

A streaming video recorder or cassette can be used to arrange a recording. All of those are identical to Time Recordings in that they are used to schedule recording. The Timer record configuration dialog box may be used to set the beginning and finish of the recording. This is how you do it:

Step 1: By definition, the recording’s Start Date and Time are set to the present time. It will begin recording on the present day and hour by default when you don’t alter it. There is no default setting for the End Date and Time. You must either choose a date and time to determine the end time.

Step 2: There is a Checkbox to Save the work immediately. By Ticking the option, you may choose the path or Folder where the file will be saved when the recording is finished.

Conclusion

Well, there you have it – your complete Audacity Record Computer Audio guide. One thing is for certain that Audacity allows some great ways of recording audio from internal and external components of your Windows and Mac. However, if your Audacity is having issues, we would highly recommend opting for another software, such as Wondershare Filmora.

Wondershare Filmora is the finest thing that has come out in recent years for recording audio from a desktop. It is intended not just for pros but also for any enthusiast videographer who desires to create a high-quality movie for their family and friends. Download it today to make your movie a delightful journey with high-quality audio recording.

Unleashing Your Creative Potential: The Comprehensive Guide to Volume Automation and Ducking with Adobe Premiere Pro (Mac Edition)

Tutorial on Audio Ducking in Adobe Premiere Pro on Mac

Benjamin Arango

Oct 26, 2023• Proven solutions

Too many times, while mixing voiceover with the background music in a video, the dialogues don’t seem to be audible. That’s when we follow the process of audio ducking in Premiere Pro that would automatically lower the volume of the background music whenever there is a dialogue.

The best thing about Premiere Pro audio ducking is that it is an automatic process and we don’t need to put a lot of effort. To make your job easier, I’m going to let you know how to use the Adobe Premiere Pro audio ducking feature in a step by step manner in this guide.

Part 1: How to Use Audio Ducking to Balance Music and Voiceover in Adobe Premiere Pro on Mac?

If you have been using Adobe Premiere Pro on Mac, then you would already be familiar with the wide range of editing features that it has. One of them is the Premiere Pro audio ducking option that comes inbuilt in the application. Using it, you can automatically lower the volume of the background music and amplify your dialogues.

To perform auto-ducking in Premiere Pro, we first need to define each audio track and then use the ducking feature. Here’s how you can also perform audio ducking in Premiere Pro like a pro.

Step 1: Define the Audio Types

Since Adobe Premiere Pro can’t automatically detect the type of sounds, you need to do it manually. To do audio ducking in Premiere Pro, you can first import your video clip and the voiceover to the application, and drag them to the working timeline.

Now, you can first select the voiceover file that you want to amplify, and from the sidebar on the right, click on “Dialogue” as the type of the audio file.

Once you mark the audio type, you will get different options. Here, go to the “Loudness” option and click on the “Auto Match” button.

Afterward, you can do the same for your background audio file. Select the file and choose its audio type as “Music”. You can also set its loudness to “Auto Match” if you want to.

Step 2: Perform Auto Ducking in Premiere Pro

Now when you have set the audio types, you can just find the Ducking option on the sidebar and turn it on. Here, you can first click on the dialogue icon from the top and get the needed options. You can adjust its sensitivity and set a level or improve or reduce its quality.

Apart from the dialogue icon, you can also click on the Music icon and do the same. For instance, you can reduce the quality of the background music and increase the level of the dialogue track.

Step 3: Make the Final Changes

Great! You can now preview the changes you have made and check the audio ducking results in Premiere Pro. If you want to finalize things, then you can perform keyframing and manually adjust the volume.

Furthermore, you can also perform an instant hard ducking in Premiere Pro. For this, just choose the track, go to the side panel, and select Preset > Music > Hard Vocal Ducking. While it would get instant results in Adobe Premiere audio ducking, the results might not be so effective.

Part 2: Wondershare Filmora : An Easier Way to Auto Duck Your Audios on Mac

As you can see, the Premiere Pro audio ducking feature can get a bit complicated if you are a beginner. Therefore, if you are looking for a simpler and more effective automatic ducking solution, then use Wondershare Filmora. This intuitive and diverse video/audio editing tool has an automatic audio ducking option that would make your job a whole lot easier.

To learn how to perform automatic audio ducking in your videos on Mac via Wondershare Filmora, one can follow these steps:

Step 1: Load the Video or Audio Files on Filmora

Firstly, you can just launch Wondershare Filmora on your Mac and import your videos/audios. You can drag and drop the files or just go to its Import Menu option to browse the files. Afterward, you can drag the files to the timeline at the bottom to work on them.

On the native interface of Filmora, you can also directly record voiceovers. Just click on the voiceover icon (below the preview window) and start recording any dialogue.

Not just that, you can also find a wide range of royalty-free music on Filmora that you can readily use in your projects without any copyright issues.

Step 2: Perform Automatic Audio Ducking on Filmora

Great! Now you can see your video and the audio track on the timeline of Filmora. At first, you need to select the voiceover (or any other track) that you want to amplify.

Once the desired audio track is selected, right-click it, and choose the “Adjust Audio” option.

As the dedicated Audio Editor will open, just go to the “Ducking” option at the bottom and turn on the “Lower the volume of other clips” feature. You can further select the level to lower the volume of other background clips in the video here.

Step 3: Save and Export Your Video

That’s it! After making the changes, just click on the “OK” button and Filmora would automatically adjust the volume of other clips. You can further make the needed changes in the video and click on the “Export” icon. This will let you save the project in the desired format and resolution on your computer.

Who knew it would be so easy to do auto-ducking in Premiere Pro, right? Though, if you are looking for even a simpler alternative to Adobe Premiere audio ducking, then consider using Wondershare Filmora. A user-friendly and resourceful video editor, it offers a wide range of features and other inbuilt tools that would meet every post-production requirement of yours in one place.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

Too many times, while mixing voiceover with the background music in a video, the dialogues don’t seem to be audible. That’s when we follow the process of audio ducking in Premiere Pro that would automatically lower the volume of the background music whenever there is a dialogue.

The best thing about Premiere Pro audio ducking is that it is an automatic process and we don’t need to put a lot of effort. To make your job easier, I’m going to let you know how to use the Adobe Premiere Pro audio ducking feature in a step by step manner in this guide.

Part 1: How to Use Audio Ducking to Balance Music and Voiceover in Adobe Premiere Pro on Mac?

If you have been using Adobe Premiere Pro on Mac, then you would already be familiar with the wide range of editing features that it has. One of them is the Premiere Pro audio ducking option that comes inbuilt in the application. Using it, you can automatically lower the volume of the background music and amplify your dialogues.

To perform auto-ducking in Premiere Pro, we first need to define each audio track and then use the ducking feature. Here’s how you can also perform audio ducking in Premiere Pro like a pro.

Step 1: Define the Audio Types

Since Adobe Premiere Pro can’t automatically detect the type of sounds, you need to do it manually. To do audio ducking in Premiere Pro, you can first import your video clip and the voiceover to the application, and drag them to the working timeline.

Now, you can first select the voiceover file that you want to amplify, and from the sidebar on the right, click on “Dialogue” as the type of the audio file.

Once you mark the audio type, you will get different options. Here, go to the “Loudness” option and click on the “Auto Match” button.

Afterward, you can do the same for your background audio file. Select the file and choose its audio type as “Music”. You can also set its loudness to “Auto Match” if you want to.

Step 2: Perform Auto Ducking in Premiere Pro

Now when you have set the audio types, you can just find the Ducking option on the sidebar and turn it on. Here, you can first click on the dialogue icon from the top and get the needed options. You can adjust its sensitivity and set a level or improve or reduce its quality.

Apart from the dialogue icon, you can also click on the Music icon and do the same. For instance, you can reduce the quality of the background music and increase the level of the dialogue track.

Step 3: Make the Final Changes

Great! You can now preview the changes you have made and check the audio ducking results in Premiere Pro. If you want to finalize things, then you can perform keyframing and manually adjust the volume.

Furthermore, you can also perform an instant hard ducking in Premiere Pro. For this, just choose the track, go to the side panel, and select Preset > Music > Hard Vocal Ducking. While it would get instant results in Adobe Premiere audio ducking, the results might not be so effective.

Part 2: Wondershare Filmora : An Easier Way to Auto Duck Your Audios on Mac

As you can see, the Premiere Pro audio ducking feature can get a bit complicated if you are a beginner. Therefore, if you are looking for a simpler and more effective automatic ducking solution, then use Wondershare Filmora. This intuitive and diverse video/audio editing tool has an automatic audio ducking option that would make your job a whole lot easier.

To learn how to perform automatic audio ducking in your videos on Mac via Wondershare Filmora, one can follow these steps:

Step 1: Load the Video or Audio Files on Filmora

Firstly, you can just launch Wondershare Filmora on your Mac and import your videos/audios. You can drag and drop the files or just go to its Import Menu option to browse the files. Afterward, you can drag the files to the timeline at the bottom to work on them.

On the native interface of Filmora, you can also directly record voiceovers. Just click on the voiceover icon (below the preview window) and start recording any dialogue.

Not just that, you can also find a wide range of royalty-free music on Filmora that you can readily use in your projects without any copyright issues.

Step 2: Perform Automatic Audio Ducking on Filmora

Great! Now you can see your video and the audio track on the timeline of Filmora. At first, you need to select the voiceover (or any other track) that you want to amplify.

Once the desired audio track is selected, right-click it, and choose the “Adjust Audio” option.

As the dedicated Audio Editor will open, just go to the “Ducking” option at the bottom and turn on the “Lower the volume of other clips” feature. You can further select the level to lower the volume of other background clips in the video here.

Step 3: Save and Export Your Video

That’s it! After making the changes, just click on the “OK” button and Filmora would automatically adjust the volume of other clips. You can further make the needed changes in the video and click on the “Export” icon. This will let you save the project in the desired format and resolution on your computer.

Who knew it would be so easy to do auto-ducking in Premiere Pro, right? Though, if you are looking for even a simpler alternative to Adobe Premiere audio ducking, then consider using Wondershare Filmora. A user-friendly and resourceful video editor, it offers a wide range of features and other inbuilt tools that would meet every post-production requirement of yours in one place.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

Too many times, while mixing voiceover with the background music in a video, the dialogues don’t seem to be audible. That’s when we follow the process of audio ducking in Premiere Pro that would automatically lower the volume of the background music whenever there is a dialogue.

The best thing about Premiere Pro audio ducking is that it is an automatic process and we don’t need to put a lot of effort. To make your job easier, I’m going to let you know how to use the Adobe Premiere Pro audio ducking feature in a step by step manner in this guide.

Part 1: How to Use Audio Ducking to Balance Music and Voiceover in Adobe Premiere Pro on Mac?

If you have been using Adobe Premiere Pro on Mac, then you would already be familiar with the wide range of editing features that it has. One of them is the Premiere Pro audio ducking option that comes inbuilt in the application. Using it, you can automatically lower the volume of the background music and amplify your dialogues.

To perform auto-ducking in Premiere Pro, we first need to define each audio track and then use the ducking feature. Here’s how you can also perform audio ducking in Premiere Pro like a pro.

Step 1: Define the Audio Types

Since Adobe Premiere Pro can’t automatically detect the type of sounds, you need to do it manually. To do audio ducking in Premiere Pro, you can first import your video clip and the voiceover to the application, and drag them to the working timeline.

Now, you can first select the voiceover file that you want to amplify, and from the sidebar on the right, click on “Dialogue” as the type of the audio file.

Once you mark the audio type, you will get different options. Here, go to the “Loudness” option and click on the “Auto Match” button.

Afterward, you can do the same for your background audio file. Select the file and choose its audio type as “Music”. You can also set its loudness to “Auto Match” if you want to.

Step 2: Perform Auto Ducking in Premiere Pro

Now when you have set the audio types, you can just find the Ducking option on the sidebar and turn it on. Here, you can first click on the dialogue icon from the top and get the needed options. You can adjust its sensitivity and set a level or improve or reduce its quality.

Apart from the dialogue icon, you can also click on the Music icon and do the same. For instance, you can reduce the quality of the background music and increase the level of the dialogue track.

Step 3: Make the Final Changes

Great! You can now preview the changes you have made and check the audio ducking results in Premiere Pro. If you want to finalize things, then you can perform keyframing and manually adjust the volume.

Furthermore, you can also perform an instant hard ducking in Premiere Pro. For this, just choose the track, go to the side panel, and select Preset > Music > Hard Vocal Ducking. While it would get instant results in Adobe Premiere audio ducking, the results might not be so effective.

Part 2: Wondershare Filmora : An Easier Way to Auto Duck Your Audios on Mac

As you can see, the Premiere Pro audio ducking feature can get a bit complicated if you are a beginner. Therefore, if you are looking for a simpler and more effective automatic ducking solution, then use Wondershare Filmora. This intuitive and diverse video/audio editing tool has an automatic audio ducking option that would make your job a whole lot easier.

To learn how to perform automatic audio ducking in your videos on Mac via Wondershare Filmora, one can follow these steps:

Step 1: Load the Video or Audio Files on Filmora

Firstly, you can just launch Wondershare Filmora on your Mac and import your videos/audios. You can drag and drop the files or just go to its Import Menu option to browse the files. Afterward, you can drag the files to the timeline at the bottom to work on them.

On the native interface of Filmora, you can also directly record voiceovers. Just click on the voiceover icon (below the preview window) and start recording any dialogue.

Not just that, you can also find a wide range of royalty-free music on Filmora that you can readily use in your projects without any copyright issues.

Step 2: Perform Automatic Audio Ducking on Filmora

Great! Now you can see your video and the audio track on the timeline of Filmora. At first, you need to select the voiceover (or any other track) that you want to amplify.

Once the desired audio track is selected, right-click it, and choose the “Adjust Audio” option.

As the dedicated Audio Editor will open, just go to the “Ducking” option at the bottom and turn on the “Lower the volume of other clips” feature. You can further select the level to lower the volume of other background clips in the video here.

Step 3: Save and Export Your Video

That’s it! After making the changes, just click on the “OK” button and Filmora would automatically adjust the volume of other clips. You can further make the needed changes in the video and click on the “Export” icon. This will let you save the project in the desired format and resolution on your computer.

Who knew it would be so easy to do auto-ducking in Premiere Pro, right? Though, if you are looking for even a simpler alternative to Adobe Premiere audio ducking, then consider using Wondershare Filmora. A user-friendly and resourceful video editor, it offers a wide range of features and other inbuilt tools that would meet every post-production requirement of yours in one place.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Oct 26, 2023• Proven solutions

Too many times, while mixing voiceover with the background music in a video, the dialogues don’t seem to be audible. That’s when we follow the process of audio ducking in Premiere Pro that would automatically lower the volume of the background music whenever there is a dialogue.

The best thing about Premiere Pro audio ducking is that it is an automatic process and we don’t need to put a lot of effort. To make your job easier, I’m going to let you know how to use the Adobe Premiere Pro audio ducking feature in a step by step manner in this guide.

Part 1: How to Use Audio Ducking to Balance Music and Voiceover in Adobe Premiere Pro on Mac?

If you have been using Adobe Premiere Pro on Mac, then you would already be familiar with the wide range of editing features that it has. One of them is the Premiere Pro audio ducking option that comes inbuilt in the application. Using it, you can automatically lower the volume of the background music and amplify your dialogues.

To perform auto-ducking in Premiere Pro, we first need to define each audio track and then use the ducking feature. Here’s how you can also perform audio ducking in Premiere Pro like a pro.

Step 1: Define the Audio Types

Since Adobe Premiere Pro can’t automatically detect the type of sounds, you need to do it manually. To do audio ducking in Premiere Pro, you can first import your video clip and the voiceover to the application, and drag them to the working timeline.

Now, you can first select the voiceover file that you want to amplify, and from the sidebar on the right, click on “Dialogue” as the type of the audio file.

Once you mark the audio type, you will get different options. Here, go to the “Loudness” option and click on the “Auto Match” button.

Afterward, you can do the same for your background audio file. Select the file and choose its audio type as “Music”. You can also set its loudness to “Auto Match” if you want to.

Step 2: Perform Auto Ducking in Premiere Pro

Now when you have set the audio types, you can just find the Ducking option on the sidebar and turn it on. Here, you can first click on the dialogue icon from the top and get the needed options. You can adjust its sensitivity and set a level or improve or reduce its quality.

Apart from the dialogue icon, you can also click on the Music icon and do the same. For instance, you can reduce the quality of the background music and increase the level of the dialogue track.

Step 3: Make the Final Changes

Great! You can now preview the changes you have made and check the audio ducking results in Premiere Pro. If you want to finalize things, then you can perform keyframing and manually adjust the volume.

Furthermore, you can also perform an instant hard ducking in Premiere Pro. For this, just choose the track, go to the side panel, and select Preset > Music > Hard Vocal Ducking. While it would get instant results in Adobe Premiere audio ducking, the results might not be so effective.

Part 2: Wondershare Filmora : An Easier Way to Auto Duck Your Audios on Mac

As you can see, the Premiere Pro audio ducking feature can get a bit complicated if you are a beginner. Therefore, if you are looking for a simpler and more effective automatic ducking solution, then use Wondershare Filmora. This intuitive and diverse video/audio editing tool has an automatic audio ducking option that would make your job a whole lot easier.

To learn how to perform automatic audio ducking in your videos on Mac via Wondershare Filmora, one can follow these steps:

Step 1: Load the Video or Audio Files on Filmora

Firstly, you can just launch Wondershare Filmora on your Mac and import your videos/audios. You can drag and drop the files or just go to its Import Menu option to browse the files. Afterward, you can drag the files to the timeline at the bottom to work on them.

On the native interface of Filmora, you can also directly record voiceovers. Just click on the voiceover icon (below the preview window) and start recording any dialogue.

Not just that, you can also find a wide range of royalty-free music on Filmora that you can readily use in your projects without any copyright issues.

Step 2: Perform Automatic Audio Ducking on Filmora

Great! Now you can see your video and the audio track on the timeline of Filmora. At first, you need to select the voiceover (or any other track) that you want to amplify.

Once the desired audio track is selected, right-click it, and choose the “Adjust Audio” option.

As the dedicated Audio Editor will open, just go to the “Ducking” option at the bottom and turn on the “Lower the volume of other clips” feature. You can further select the level to lower the volume of other background clips in the video here.

Step 3: Save and Export Your Video

That’s it! After making the changes, just click on the “OK” button and Filmora would automatically adjust the volume of other clips. You can further make the needed changes in the video and click on the “Export” icon. This will let you save the project in the desired format and resolution on your computer.

Who knew it would be so easy to do auto-ducking in Premiere Pro, right? Though, if you are looking for even a simpler alternative to Adobe Premiere audio ducking, then consider using Wondershare Filmora. A user-friendly and resourceful video editor, it offers a wide range of features and other inbuilt tools that would meet every post-production requirement of yours in one place.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Also read: