10 Best Free Online Audio Normalizers

What is Audio Normalization, what are its different types, why do we need it and how to do it online? – these are the questions we might ask when first learning about it. Well, then, let’s answer all of them!

Audio Normalization means that the loudest parts of an audio signal are set to a specific value. For example, -18 dBFS (decibels relative to full scale). This is done so that all the parts of the sound mix remain at equal volume levels.

You can use this tool when mixing or editing your music, or during playback on your speakers. In the case of mixing, listen for any clipping (A form of waveform distortion - It sounds like the audio is starting to ‘break up,’ which is light distortion. The more severe it is, the more distorted the music begins to sound) that could occur in your mix. So, in this case, you need to normalize before it becomes too loud and needs more and more fixing. So, normalizing the audio kind of means balancing the volume of the track.

Mostly, audio normalizers are used for balancing out the volume of music, podcast, or other audio recordings. Whenever you have a variety of audio clips that would sound too loud or soft if listened to together, an audio normalizer helps you create a more cohesive listening experience. So, why, and when, do we need to normalize our tracks?

• To make different music styles sound more cohesive;
• To adjust the volume of podcast to be at a consistent level with one another
• To remove sharp spikes in volume for consistent listening experience for our audiences

So, what are the types of audio normalization? Here you have it:

• peak normalization - helps adjust the recording based on the highest signal level present in the recording;
• loudness normalization - adjusts the recording based on perceived loudness;
• RMS (Root-Mean-Square) - changes the value of all the samples, where their average electrical volume overall is a specified level.

So, say that if you are a creator and have listeners, with this tool, you can count on the expectation that people will more likely want to convert to being loyal subscribers, viewers and listeners. This is what happens when audiences feel their user experience is favored and they enjoy a good content – it makes them come back for more.

But sometimes you don’t have so much time that would allow you to find a software, download its installer, install it, learn how to navigate inside its interface, which might be totally new and in some cases, complicated for you, and learn how to normalize your audio files there. In this case, you might want to find the right tools which would enable you to reach your goal without even having to install anything – simple and fast!

Hence, for this case, we would like to offer you the list of 10 best free online audio normalizers. The list goes:

1. MP3 Gain Volume Changer
2. Sodaphonic
3. Audio Mass
4. Audio Online Convert
5. Audio Editor
6. fConvert Online Converter
7. Boost MP3 Volume
8. MP3Cut Change Volume
9. Audio Alter Volume Changer
10. Audio Trimmer Volume Booster

Therefore, let’s delve into each one of them, and learn how to use those online editors in our favor!

MP3 Gain Volume Changer

This online editor allows you to adjust the volume level of MP3 audio files fast – it can raise, lower, and normalize the volume level of your MP3 files.

The interface is simple and easy to use – exactly what you must be looking for. You can adjust the volume level to make the MP3 the way you want to listen to it.

One of the important things this app is letting you do is to upload from Google Drive or Desktop – it works locally without going through a server, and this means that MP3s do not need to be uploaded to any server.

So, go to this link . Click on Choose Files and find the audio clip you would like to normalize.

Now, once your audio track is added, head a little below and find the options you have.

Here, you can decide what do really do with your file: do you want to increase or decrease the volume? If you choose automatic normalization, the app will figure something out itself! And, look at the right side – in case you know well your decibels, you can choose how many decibels to apply. But the web-site itself says that 3.0 decibels is recommended, so it would be nice to just stick with it.

If you have multiple files and you want to normalize them all at once, click on Create MP3 (All); in case you have a lot of files and you would like to normalize one or more of them but not all, then your best choice would be Create MP3 (Selected). Another option is that you save your file on Google Drive.

When you Create your file(s), the normalized one(s) will appear under those buttons in Progress Log, and you can Play right away, or Download and listen to it later on.

Sodaphonic

Sodaphonic also lets you edit your audio files online. With the help of this editor, you can cut, copy, and paste sound segments of an audio. It offers you: normalizing audio, using audio effects, time-stretching, reversing audio, fade-in and fade-out – those tools are really helpful.

Sodaphonic is pretty interesting as the first thing that meets the eye is that it lets you not only pick or drop an audio file there, but record something new, too!

Any option you choose, then when proceeding into the editor, you will see your file waveform there. In order to normalize the audio, on the top left, find Edit, put a cursor on it, and you will see the menu appear. Find Normalize and click on it.

A little window will appear, where you need to fill in how many decibels should be set as the max peak.

Once you do this and click on Normalize, your file will now be affected, and you can also compare the waveform – it is now a little different, isn’t it?

So, when you are happy with the result, just go to File, and Choose Export.

Audio Mass

The Audio Mass editor will help you edit audio and waveforms over the web. There, you can load any audio format your browser supports, and apply many different audio effects (fading in, cutting, trimming…)

So, Audio Mass lets you: normalize audio, analyze frequency, signal distortion and peaking, trim, past, cut audio segments, reversing and inverting audio, convert to MP3, change of volume levels, fade in and fade out, audio compressor, adding reverb, delay, distortion.

When you go to the web-site , you can choose your desired file right away and the site will open it in a waveform. Now, the Normalize option is in the Effects (in the menu on the top). Click on it.

The window opened will show the option to Normalize Left and Right Equally, and it also doesn’t give you decibels – instead, you can choose the percentage on how you would like it to be normalized.

Then, surely, click on the Normalize Audio button and enjoy the result – the waveform itself will show you how different the file becomes…

Audio online convert

This is the tool mostly to be used to convert to different audio formats. In the process if converting audio, you will be able to normalize audio too, as well as change bitrate, sample rate, audio channels, and more.

Go to Audio Online Convert . Of course, click on Choose File and find the track you want to normalize.

Below, you have some settings you can work on, which we have already mentioned. So, if we focus on our article’s topic, you need to find the option Normalize audio, and check the box there. Then, click to Start and the web-site will work on the track according to what you decided to change there. You will have a little while your file is being processed.

So, when it is completed and your file is ready, just click on Download and you are ready to use it as you like.

Audio editor

The DikTorov Audio Editor is an online app to edit audio, normalize audio, or fade in / out audio. It offers: real-time editing and playback of audio files, supports all popular audio formats, and exports as WAV.

Go to the web-site , choose your file and drag it in the blue space in the center.

Now, find the blue Normalize Volume button on the top form the audio waveform, notice that on the right of it, you can change the dBs, and fill in your desired max peak decibel. Then, click on the button Normalize Volume, and the setting will be applied onto your track.

fConvert Online Converter

fConvert is an audio converter service that converts any audio file to any format. There, you can: normalize audio, change sample rate, change file format.

Go to the fConvert , Choose File from your computer, do the settings, and don’t forget to check in the box next to Normalize at the end of the settings.

For the conversion process to start, click on fConvert. Then, scroll down a little, and you’ll find that there is a Result you can already download!

Boost MP3 Volume

The MP3 Volume tool can increase or decrease the volume of any MP3 file online, change file from 1 to 25 decibels, and adjust one or both audio channels.

Open the web-site in your browser, select MP3 file, which should be no more than 150 MB, and take care of the settings.

So, as we mentioned, here you can increase or decrease the volume, and choose your desired max peak (3 decibels recommended everywhere!), and select channels – both or only right or left.

Then, click on Submit Now, wait a little while your file is being uploaded, and once it is finished, you will see the download link on the top of the settings box.

MP3Cut Change Volume

The volume changer app lets you increase audio volume while maintaining the original audio quality. It supports all audio file formats including MP3, M4A, WAV, M4R, FLAC… as an audio converter, it lets you save files in any desired format. Of course, it doesn’t require that you have any technical skills, just move the slider to adjust the volume. It’s very easy to use and offers unlimited file size.

Open MP3Cut , and click on Open file.

Now, instead of Normalize, in this case, you will have to look for the word Equalizer, which you can find in Audio Tools on the top menu. Click on it, wait, and you will see the sliders appear below the waveform of the track.

The sophisticated app also lets you choose the options to select the one most compatible with your audio track, such as: Default (it can be anything, surely), Classic, Dance, Laptop speakers, Live, Party, etc…

You can equalize your track by playing around with the sliders, and then save the result when you are satisfied with the result.

Audio Alter Volume Changer

You can raise or lower the volume of any audio file using this free online tool. Its main advantages are that it’s fast and easy to use, and supports MP4, WAV, FLAC, OGG.

After opening the web-site , now click on Browse computer button to select your file. It will prepare your file and as in most cases, the waveform will appear.

Below, there is a decibels line, where you can once again select your desired max peak dB.

After you have set your dB to the desired amount, click on Submit and wait while your file is being processed. After that, when the audio is converted, you can download it, and also, go back to the main page and edit another file.

Audio Trimmer Volume Booster

This is a free online audio file volume booster. With it, you can very easily increase the volume of songs and make your MP3s louder. Supported formats are: MP3, WAV, WMA, OGG, M4R, M4A, FLAC, AIFF.

Open the site , and find a black line where you will see the option to upload your track. Click on Choose File and select your desired track from your computer.

Now, on the right side under the black line where we uploaded our file, you can see the Loudness options. Click on it and choose from the following: Mild, Moderate, High, and Extreme. Once you have chosen, click on Boost Volume. It will process and in a few seconds, you will have your file ready for download!

Normalize audio in Wondershare Filmora X

Now, even though we already know 10 (which is a lot!) free online normalizers, and we really hope you will be able to choose among them and reach your goal in an easy way, it might be even better if we know some more about normalizing audios using a software.

It is almost as easy to use, but what if you need some more editing opportunities, and with a simple interface? – in this case, worth discussing is a software called Wondershare Filmora X , which helps us have a wonderful, and share-able results. (as the name itself suggests!) It is an actual video editor, and many people all around the world enjoy its presence, especially the ones who don’t want to use a program so sophisticated and complicated for them to require learning for months, but try to have some main editing tools at hand. Filmora operates on Mac and Windows, its interface is very easily understandable for beginners right away. It’s worth noting that not a long ago, Wondershare Filmora X introduced the feature to normalize the audio for the first time. So, go on, download the latest version of Filmora X, and follow along the detailed step by step guideline to normalize audio there!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Click and drag the video of which the audio you want to normalize. Select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

You will see that there is a kind of graphic before your eyes, and if you can see that the waveform is not so equal, you can be pretty sure without even listening, that the noises are so much different from each other, which makes us understand once more, how useful and sometimes, even necessary, audio normalization can be:

Select the files you want to balance, right-click and click on Adjust Audio. New panel will be opened on left top and there, you will see Auto Normalization appear – check the box next to it.

After you have clicked on it, wait until the normalization completes.

With it being done, all your audio clips will be normalized, you will now be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is not a noticeable difference between how they really sound. So, now you can just go and save the file you have just normalized!

So, in this article, we have learned about audio normalization, we have answered some questions about what it is, why and when do we need it, which are the 10 best online editors that will help us normalize our audio tracks without really wasting a lot of time and installing a software, but we also touched upon one software Wondershare Filmora X which can help us carry out the same task in no time. The best thing we can learn from this article is that there are just countless ways of doing one thing, and in today’s world, we are full of resources to reach our targets and aims. So, we hope this article helped you choose your favorite tool, and facilitate working on the audios for you – until next time!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Click and drag the video of which the audio you want to normalize. Select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

You will see that there is a kind of graphic before your eyes, and if you can see that the waveform is not so equal, you can be pretty sure without even listening, that the noises are so much different from each other, which makes us understand once more, how useful and sometimes, even necessary, audio normalization can be:

Select the files you want to balance, right-click and click on Adjust Audio. New panel will be opened on left top and there, you will see Auto Normalization appear – check the box next to it.

After you have clicked on it, wait until the normalization completes.

With it being done, all your audio clips will be normalized, you will now be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is not a noticeable difference between how they really sound. So, now you can just go and save the file you have just normalized!

So, in this article, we have learned about audio normalization, we have answered some questions about what it is, why and when do we need it, which are the 10 best online editors that will help us normalize our audio tracks without really wasting a lot of time and installing a software, but we also touched upon one software Wondershare Filmora X which can help us carry out the same task in no time. The best thing we can learn from this article is that there are just countless ways of doing one thing, and in today’s world, we are full of resources to reach our targets and aims. So, we hope this article helped you choose your favorite tool, and facilitate working on the audios for you – until next time!

Top-Tier Audio Purge Software for Videos on All Platforms (New Era of Removal, 2024)

If you are using the wrong tool, then working with videos can be tough and frustrating. This is because not every tool offers the same features and functionalities that an amazing tool can offer. Let’s take a scenario; imagine you come across a video, but you don’t like the sound of it. What will you do now? Are you going to compromise on the sound, or are you going to find another video?

What if you get a chance to remove sound from the video? This option sounds a lot better than the other options. The next thing you need to look for is a good sound remover. There are a few brilliant tools that allow video editing and are also great sound remover from video. Keep reading the article if you are interested in learning more about this.

In this article

01 How to Remove Sound from Video on Windows and Mac

02 How to Remove Sound from Video Online

Part 1. How to Remove Sound from Video on Windows and Mac

This is the social media era. People are always uploading and sharing their life. Some people generally referred to as Influencers have adopted social media as their career. Suppose you are one of those, and you want to add a video clip to your content, but the background sound is not satisfying you. The best possible solution to this problem is to delete sound from the video.

If you are facing a similar problem, then this section of the article is for you. We are about to introduce background sound remover. It doesn’t matter if you are a Windows or Mac user; the sound removers work well on both platforms.

Method 1: Wondershare Filmora

The first sound remover from video that we are going to talk about is Wondershare Filmora. This amazing video editor offers a whole different editing world to you. With Filmora video editor, you can create unique videos without sweating. The software has a wide range of effects, transitions, titles, and other editing elements.

Moreover, Filmora offers limitless video editing features. With just a few clicks, you can do motion tracking keyframing. Cool edits like the split-screen are also possible with Filmora. The software is multi-track, drag and drop, and easy to use.

Along with this, Filmora also has audio editing features. From one platform, you can edit video audio and also remove sound. The audio editing lets you add background music, split audio, and also mute clip. You can also use Filmora’s Adjust Audio Volume, Audio Equalizer, and Audio Denoise feature. By following the steps shared below, you can quickly delete sound from video using Wondershare Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Create Project in Filmora

The process to remove sound from video starts when you launch Wondershare Filmora on your respective device. Then, select your desired aspect ratio and hit the ‘New Project’ option to get started.

Step 2: Import Media File

The next step asks you to import the media file from which you plan to remove sound. For this, head to the ‘File’ tab from the top panel. Click on it and select the ‘Import Media’ option. Then click on the ‘Import Media Files.’ As soon as the file is imported, drag and drop it onto the timeline. You can also change the resolution and the frame rate for the media file.

Step 3: Audio Editing

To remove sound from video, the user needs to open the audio menu. For that, right-click on the media file and select the option of ‘Audio.’ A sub-menu will show up on the screen. From that menu, you should choose the ‘Detach Audio’ option. This removes and separates the audio from the video, and it is displayed separately on the timeline.

Step 4: Exporting No Sound Video File

You can right-click on the audio file and delete it. Or else, select the audio file and hit the ‘Delete’ button on the keyboard to delete it. Lastly, you can preview the final file and export it. Select the output format for your video and hit the ‘Export’ button to get the sound-free video.

Method 2: Adobe Premiere Pro

The following background sound remover that we are sharing is Adobe Premiere Pro. The video editor is great to work on both Windows and Mac. Premiere Pro has a very responsive interface. It supports multiple file formats and various video types. It offers Motion Graphics templates along with VR editing and VR rotates sphere.

With Premiere Pro, you can open multiple projects at once and work on them simultaneously. You can switch and lift scenes from one another. The video editing software offers effects, transitions, labels, and other things. You can also remove background sound from videos with the help of Adobe Premiere Pro. If you don’t know how to remove sound from video, then follow the step-by-step guideline shared below.

Step 1: Create New Project

For removing sound from video, start by opening Adobe Premiere Pro. Once its interface appears, you need to create a ‘New Project’ so that you can get started.

Step 2: Import Video File

For the next step, you need to import the media file to Premiere Pro. This could be done by clicking on the ‘File’ option from the top panel. Then, select the ‘Import’ button and browse the media file you want to work with.

Step 3: Drag to Premiere Pro Timeline

Once your file has been imported, drag it to the Project timeline. After that, you need to highlight the clip in the timeline by clicking on it. Now, right-click on the highlighted clip. From the menu list, select the option of ‘Unlink.’ This separates and unlinks the audio from the video file.

Step 4: Delete the Audio

Since the audio is unlinked from the media file, you can now delete that audio file. You simply have to select the audio layer and press the ‘Delete’ key or right-click on the audio and select the ‘Clear’ option from the menu to delete the audio. Your video without sound is now ready to be exported.

Part 2. How to Remove Sound from Video Online

Since we have shared the 2 best sound removers from video for both Mac and Windows, now it’s time to shed light on an online sound remover. Clideo is the platform that you can use to remove sound from your video. The online tool is fast and easy to use for removing sound. Clideo supports a variety of video formats like MP4, AVI, MPG, WMV, and many more.

The tool lets you watch the preview of the video. If the video satisfies you, only then save it to your device. Clideo is compatible with multiple devices, for instance, iOS and Android phones. It also supports Windows and Mac computers. If you want to learn about how to delete sound from video using Clideo, then keep reading.

Step 1: Upload Media File

Start the process by accessing the online sound remover tool, Clideo. Then, you need to upload the media file that you want to work with. For this, you can either click on ‘Choose File’ or browse for the video on your device. Or else, you can also upload from Dropbox or Google Drive.

Step 2: Removing Sound

As the tool removes sound from videos. So, as soon as the video is uploaded, Clideo takes a few seconds to remove the sound and to mute your video.

Step 3: Download the Final Video

Once the sound has been removed, with Clideo, you can preview the result. Watch the muted video. If you are satisfied with the final video, then download it to your device.

Conclusion

Sound removers are very helpful tools. You can remove sound and add your desired background sound to it. If you have been struggling and looking for the best background sound removers from videos, then this article is perfect for you. We have talked about different tools to remove sound, both for Mac and Windows. We also discussed an online tool that is very fast and easy.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor.

Numerous effects, footage and audio.

Try It Free Try It Free

02 How to Remove Sound from Video Online

Part 1. How to Remove Sound from Video on Windows and Mac

This is the social media era. People are always uploading and sharing their life. Some people generally referred to as Influencers have adopted social media as their career. Suppose you are one of those, and you want to add a video clip to your content, but the background sound is not satisfying you. The best possible solution to this problem is to delete sound from the video.

If you are facing a similar problem, then this section of the article is for you. We are about to introduce background sound remover. It doesn’t matter if you are a Windows or Mac user; the sound removers work well on both platforms.

Method 1: Wondershare Filmora

The first sound remover from video that we are going to talk about is Wondershare Filmora. This amazing video editor offers a whole different editing world to you. With Filmora video editor, you can create unique videos without sweating. The software has a wide range of effects, transitions, titles, and other editing elements.

Moreover, Filmora offers limitless video editing features. With just a few clicks, you can do motion tracking keyframing. Cool edits like the split-screen are also possible with Filmora. The software is multi-track, drag and drop, and easy to use.

Along with this, Filmora also has audio editing features. From one platform, you can edit video audio and also remove sound. The audio editing lets you add background music, split audio, and also mute clip. You can also use Filmora’s Adjust Audio Volume, Audio Equalizer, and Audio Denoise feature. By following the steps shared below, you can quickly delete sound from video using Wondershare Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Create Project in Filmora

The process to remove sound from video starts when you launch Wondershare Filmora on your respective device. Then, select your desired aspect ratio and hit the ‘New Project’ option to get started.

Step 2: Import Media File

The next step asks you to import the media file from which you plan to remove sound. For this, head to the ‘File’ tab from the top panel. Click on it and select the ‘Import Media’ option. Then click on the ‘Import Media Files.’ As soon as the file is imported, drag and drop it onto the timeline. You can also change the resolution and the frame rate for the media file.

Step 3: Audio Editing

To remove sound from video, the user needs to open the audio menu. For that, right-click on the media file and select the option of ‘Audio.’ A sub-menu will show up on the screen. From that menu, you should choose the ‘Detach Audio’ option. This removes and separates the audio from the video, and it is displayed separately on the timeline.

Step 4: Exporting No Sound Video File

You can right-click on the audio file and delete it. Or else, select the audio file and hit the ‘Delete’ button on the keyboard to delete it. Lastly, you can preview the final file and export it. Select the output format for your video and hit the ‘Export’ button to get the sound-free video.

Method 2: Adobe Premiere Pro

The following background sound remover that we are sharing is Adobe Premiere Pro. The video editor is great to work on both Windows and Mac. Premiere Pro has a very responsive interface. It supports multiple file formats and various video types. It offers Motion Graphics templates along with VR editing and VR rotates sphere.

With Premiere Pro, you can open multiple projects at once and work on them simultaneously. You can switch and lift scenes from one another. The video editing software offers effects, transitions, labels, and other things. You can also remove background sound from videos with the help of Adobe Premiere Pro. If you don’t know how to remove sound from video, then follow the step-by-step guideline shared below.

Step 1: Create New Project

For removing sound from video, start by opening Adobe Premiere Pro. Once its interface appears, you need to create a ‘New Project’ so that you can get started.

Step 2: Import Video File

For the next step, you need to import the media file to Premiere Pro. This could be done by clicking on the ‘File’ option from the top panel. Then, select the ‘Import’ button and browse the media file you want to work with.

Step 3: Drag to Premiere Pro Timeline

Once your file has been imported, drag it to the Project timeline. After that, you need to highlight the clip in the timeline by clicking on it. Now, right-click on the highlighted clip. From the menu list, select the option of ‘Unlink.’ This separates and unlinks the audio from the video file.

Step 4: Delete the Audio

Since the audio is unlinked from the media file, you can now delete that audio file. You simply have to select the audio layer and press the ‘Delete’ key or right-click on the audio and select the ‘Clear’ option from the menu to delete the audio. Your video without sound is now ready to be exported.

Part 2. How to Remove Sound from Video Online

Since we have shared the 2 best sound removers from video for both Mac and Windows, now it’s time to shed light on an online sound remover. Clideo is the platform that you can use to remove sound from your video. The online tool is fast and easy to use for removing sound. Clideo supports a variety of video formats like MP4, AVI, MPG, WMV, and many more.

The tool lets you watch the preview of the video. If the video satisfies you, only then save it to your device. Clideo is compatible with multiple devices, for instance, iOS and Android phones. It also supports Windows and Mac computers. If you want to learn about how to delete sound from video using Clideo, then keep reading.

Step 1: Upload Media File

Start the process by accessing the online sound remover tool, Clideo. Then, you need to upload the media file that you want to work with. For this, you can either click on ‘Choose File’ or browse for the video on your device. Or else, you can also upload from Dropbox or Google Drive.

Step 2: Removing Sound

As the tool removes sound from videos. So, as soon as the video is uploaded, Clideo takes a few seconds to remove the sound and to mute your video.

Step 3: Download the Final Video

Once the sound has been removed, with Clideo, you can preview the result. Watch the muted video. If you are satisfied with the final video, then download it to your device.

Conclusion

Sound removers are very helpful tools. You can remove sound and add your desired background sound to it. If you have been struggling and looking for the best background sound removers from videos, then this article is perfect for you. We have talked about different tools to remove sound, both for Mac and Windows. We also discussed an online tool that is very fast and easy.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor.

Numerous effects, footage and audio.

Try It Free Try It Free

02 How to Remove Sound from Video Online

Part 1. How to Remove Sound from Video on Windows and Mac

This is the social media era. People are always uploading and sharing their life. Some people generally referred to as Influencers have adopted social media as their career. Suppose you are one of those, and you want to add a video clip to your content, but the background sound is not satisfying you. The best possible solution to this problem is to delete sound from the video.

If you are facing a similar problem, then this section of the article is for you. We are about to introduce background sound remover. It doesn’t matter if you are a Windows or Mac user; the sound removers work well on both platforms.

Method 1: Wondershare Filmora

The first sound remover from video that we are going to talk about is Wondershare Filmora. This amazing video editor offers a whole different editing world to you. With Filmora video editor, you can create unique videos without sweating. The software has a wide range of effects, transitions, titles, and other editing elements.

Moreover, Filmora offers limitless video editing features. With just a few clicks, you can do motion tracking keyframing. Cool edits like the split-screen are also possible with Filmora. The software is multi-track, drag and drop, and easy to use.

Along with this, Filmora also has audio editing features. From one platform, you can edit video audio and also remove sound. The audio editing lets you add background music, split audio, and also mute clip. You can also use Filmora’s Adjust Audio Volume, Audio Equalizer, and Audio Denoise feature. By following the steps shared below, you can quickly delete sound from video using Wondershare Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Create Project in Filmora

The process to remove sound from video starts when you launch Wondershare Filmora on your respective device. Then, select your desired aspect ratio and hit the ‘New Project’ option to get started.

Step 2: Import Media File

The next step asks you to import the media file from which you plan to remove sound. For this, head to the ‘File’ tab from the top panel. Click on it and select the ‘Import Media’ option. Then click on the ‘Import Media Files.’ As soon as the file is imported, drag and drop it onto the timeline. You can also change the resolution and the frame rate for the media file.

Step 3: Audio Editing

To remove sound from video, the user needs to open the audio menu. For that, right-click on the media file and select the option of ‘Audio.’ A sub-menu will show up on the screen. From that menu, you should choose the ‘Detach Audio’ option. This removes and separates the audio from the video, and it is displayed separately on the timeline.

Step 4: Exporting No Sound Video File

You can right-click on the audio file and delete it. Or else, select the audio file and hit the ‘Delete’ button on the keyboard to delete it. Lastly, you can preview the final file and export it. Select the output format for your video and hit the ‘Export’ button to get the sound-free video.

Method 2: Adobe Premiere Pro

The following background sound remover that we are sharing is Adobe Premiere Pro. The video editor is great to work on both Windows and Mac. Premiere Pro has a very responsive interface. It supports multiple file formats and various video types. It offers Motion Graphics templates along with VR editing and VR rotates sphere.

With Premiere Pro, you can open multiple projects at once and work on them simultaneously. You can switch and lift scenes from one another. The video editing software offers effects, transitions, labels, and other things. You can also remove background sound from videos with the help of Adobe Premiere Pro. If you don’t know how to remove sound from video, then follow the step-by-step guideline shared below.

Step 1: Create New Project

For removing sound from video, start by opening Adobe Premiere Pro. Once its interface appears, you need to create a ‘New Project’ so that you can get started.

Step 2: Import Video File

For the next step, you need to import the media file to Premiere Pro. This could be done by clicking on the ‘File’ option from the top panel. Then, select the ‘Import’ button and browse the media file you want to work with.

Step 3: Drag to Premiere Pro Timeline

Once your file has been imported, drag it to the Project timeline. After that, you need to highlight the clip in the timeline by clicking on it. Now, right-click on the highlighted clip. From the menu list, select the option of ‘Unlink.’ This separates and unlinks the audio from the video file.

Step 4: Delete the Audio

Since the audio is unlinked from the media file, you can now delete that audio file. You simply have to select the audio layer and press the ‘Delete’ key or right-click on the audio and select the ‘Clear’ option from the menu to delete the audio. Your video without sound is now ready to be exported.

Part 2. How to Remove Sound from Video Online

Since we have shared the 2 best sound removers from video for both Mac and Windows, now it’s time to shed light on an online sound remover. Clideo is the platform that you can use to remove sound from your video. The online tool is fast and easy to use for removing sound. Clideo supports a variety of video formats like MP4, AVI, MPG, WMV, and many more.

The tool lets you watch the preview of the video. If the video satisfies you, only then save it to your device. Clideo is compatible with multiple devices, for instance, iOS and Android phones. It also supports Windows and Mac computers. If you want to learn about how to delete sound from video using Clideo, then keep reading.

Step 1: Upload Media File

Start the process by accessing the online sound remover tool, Clideo. Then, you need to upload the media file that you want to work with. For this, you can either click on ‘Choose File’ or browse for the video on your device. Or else, you can also upload from Dropbox or Google Drive.

Step 2: Removing Sound

As the tool removes sound from videos. So, as soon as the video is uploaded, Clideo takes a few seconds to remove the sound and to mute your video.

Step 3: Download the Final Video

Once the sound has been removed, with Clideo, you can preview the result. Watch the muted video. If you are satisfied with the final video, then download it to your device.

Conclusion

Sound removers are very helpful tools. You can remove sound and add your desired background sound to it. If you have been struggling and looking for the best background sound removers from videos, then this article is perfect for you. We have talked about different tools to remove sound, both for Mac and Windows. We also discussed an online tool that is very fast and easy.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor.

Numerous effects, footage and audio.

Try It Free Try It Free

02 How to Remove Sound from Video Online

Part 1. How to Remove Sound from Video on Windows and Mac

This is the social media era. People are always uploading and sharing their life. Some people generally referred to as Influencers have adopted social media as their career. Suppose you are one of those, and you want to add a video clip to your content, but the background sound is not satisfying you. The best possible solution to this problem is to delete sound from the video.

If you are facing a similar problem, then this section of the article is for you. We are about to introduce background sound remover. It doesn’t matter if you are a Windows or Mac user; the sound removers work well on both platforms.

Method 1: Wondershare Filmora

The first sound remover from video that we are going to talk about is Wondershare Filmora. This amazing video editor offers a whole different editing world to you. With Filmora video editor, you can create unique videos without sweating. The software has a wide range of effects, transitions, titles, and other editing elements.

Moreover, Filmora offers limitless video editing features. With just a few clicks, you can do motion tracking keyframing. Cool edits like the split-screen are also possible with Filmora. The software is multi-track, drag and drop, and easy to use.

Along with this, Filmora also has audio editing features. From one platform, you can edit video audio and also remove sound. The audio editing lets you add background music, split audio, and also mute clip. You can also use Filmora’s Adjust Audio Volume, Audio Equalizer, and Audio Denoise feature. By following the steps shared below, you can quickly delete sound from video using Wondershare Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Create Project in Filmora

The process to remove sound from video starts when you launch Wondershare Filmora on your respective device. Then, select your desired aspect ratio and hit the ‘New Project’ option to get started.

Step 2: Import Media File

The next step asks you to import the media file from which you plan to remove sound. For this, head to the ‘File’ tab from the top panel. Click on it and select the ‘Import Media’ option. Then click on the ‘Import Media Files.’ As soon as the file is imported, drag and drop it onto the timeline. You can also change the resolution and the frame rate for the media file.

Step 3: Audio Editing

To remove sound from video, the user needs to open the audio menu. For that, right-click on the media file and select the option of ‘Audio.’ A sub-menu will show up on the screen. From that menu, you should choose the ‘Detach Audio’ option. This removes and separates the audio from the video, and it is displayed separately on the timeline.

Step 4: Exporting No Sound Video File

You can right-click on the audio file and delete it. Or else, select the audio file and hit the ‘Delete’ button on the keyboard to delete it. Lastly, you can preview the final file and export it. Select the output format for your video and hit the ‘Export’ button to get the sound-free video.

Method 2: Adobe Premiere Pro

The following background sound remover that we are sharing is Adobe Premiere Pro. The video editor is great to work on both Windows and Mac. Premiere Pro has a very responsive interface. It supports multiple file formats and various video types. It offers Motion Graphics templates along with VR editing and VR rotates sphere.

With Premiere Pro, you can open multiple projects at once and work on them simultaneously. You can switch and lift scenes from one another. The video editing software offers effects, transitions, labels, and other things. You can also remove background sound from videos with the help of Adobe Premiere Pro. If you don’t know how to remove sound from video, then follow the step-by-step guideline shared below.

Step 1: Create New Project

For removing sound from video, start by opening Adobe Premiere Pro. Once its interface appears, you need to create a ‘New Project’ so that you can get started.

Step 2: Import Video File

For the next step, you need to import the media file to Premiere Pro. This could be done by clicking on the ‘File’ option from the top panel. Then, select the ‘Import’ button and browse the media file you want to work with.

Step 3: Drag to Premiere Pro Timeline

Once your file has been imported, drag it to the Project timeline. After that, you need to highlight the clip in the timeline by clicking on it. Now, right-click on the highlighted clip. From the menu list, select the option of ‘Unlink.’ This separates and unlinks the audio from the video file.

Step 4: Delete the Audio

Since the audio is unlinked from the media file, you can now delete that audio file. You simply have to select the audio layer and press the ‘Delete’ key or right-click on the audio and select the ‘Clear’ option from the menu to delete the audio. Your video without sound is now ready to be exported.

Part 2. How to Remove Sound from Video Online

Since we have shared the 2 best sound removers from video for both Mac and Windows, now it’s time to shed light on an online sound remover. Clideo is the platform that you can use to remove sound from your video. The online tool is fast and easy to use for removing sound. Clideo supports a variety of video formats like MP4, AVI, MPG, WMV, and many more.

The tool lets you watch the preview of the video. If the video satisfies you, only then save it to your device. Clideo is compatible with multiple devices, for instance, iOS and Android phones. It also supports Windows and Mac computers. If you want to learn about how to delete sound from video using Clideo, then keep reading.

Step 1: Upload Media File

Start the process by accessing the online sound remover tool, Clideo. Then, you need to upload the media file that you want to work with. For this, you can either click on ‘Choose File’ or browse for the video on your device. Or else, you can also upload from Dropbox or Google Drive.

Step 2: Removing Sound

As the tool removes sound from videos. So, as soon as the video is uploaded, Clideo takes a few seconds to remove the sound and to mute your video.

Step 3: Download the Final Video

Once the sound has been removed, with Clideo, you can preview the result. Watch the muted video. If you are satisfied with the final video, then download it to your device.

Conclusion

Sound removers are very helpful tools. You can remove sound and add your desired background sound to it. If you have been struggling and looking for the best background sound removers from videos, then this article is perfect for you. We have talked about different tools to remove sound, both for Mac and Windows. We also discussed an online tool that is very fast and easy.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor.

Numerous effects, footage and audio.

Try It Free Try It Free

The Beat Architect: Techniques for Isolating and Repurposing Kernels in Audio

You may want to extra beat from song for your YouTube videos or other creative projects. Or maybe you just want to create an instrumentals file perfect for singing karaoke. Using the original song may not give the thrill you are after due to the effects and other noises. With a beat remover from song, you will have more ways to enjoy the music. In this article, we explore ways to extract beat from song online and include software to make this super easy.

AI Vocal Remover A cross-platform for facilitating your video editing process by offering valuable benefits!

Free Download Free Download Learn More

Part 1. Best Tools to Extract Beats from Songs Like a Pro: The Ultimate Guide

Choosing a beat remover from song tool can be easier when you know the options available. Some of the tools allow you to remove the beat online while others work perfectly online. Let’s explore the top five tools, including the pros and cons for each:

• Media.io
• UniConverter
• Audacity
• PhonicMind
• Lalal.ai

1. Media.io

Media.io is a reliable beat remover from a song. The online tool is commonly used as an MP3 voice remover but also has a range of other effective features. It is AI-powered, which helps to provide quality output in a timely manner. Quickly get your instrumental songs for free with no software or app required.

Pros

• Easy-to-use software that removes beats from songs accurately
• Automatically extracts beats from standard video and audio formats
• Offers additional audio editing tools like compressing and trimming
• Convenient to share with smart output settings

Cons

• File upload is limited to 100MB only

2. UniConverter

UniConnverter is an effective video converter and compressor that works well in removing beats from a song. Enriched with over 20 lightweight features, the software effectively edits 4K, 8K, and HDR files. The software has many uses, including instrumental extractors for practicing karaoke performance or even embedding beats in the background of your TikTok video.

Pros

• Ultra-fast removal of beats and processing of audio
• Effectively separates vocals and beats in song and other audio files
• A video-to-audio conversion tool

Cons

• A bit costly

3. Audacity

This is one of the best and easiest ways to remove beat from song online. It is a popular choice for beginners and professionals because all features are on the same platform. Being a free and open-source program, Audacity is a great choice for editing audio professionally. It comes with all audio editing features, including instrumental or beat extractor. Simply use the remove vocal options on the program to achieve quality audio output.

Pros

• Free, open-source beat and instrumental extractor
• Supports a wide range of audio formats
• No file size limit required

Cons

• Doesn’t support video formats
• Not beginner-friendly

4. PhonicMind

This is a quick and simple online tool for extracting beats from a song online. It supports all the standard audio formats and prepares download MP3 files. PhonicMind also allows you to download the beats file in MP4, ZIP, and FLAC using the Pro Plan. As an online instrumental extractor, PhonicMind also works well with stem extraction that supports vocals, piano, bass, drums, and many more with intuitive features for Android and iPhones.

Pros

• Supports stem extraction
• Multiple audio input formats
• Simple to use and process beats

Cons

• Free users can only export the output in MP3
• 100MB file limit

5. Lalal.ai

This is a simple and free program for extracting beats from a song. The ad-free online program allows you to extract beats and vocals within minutes while keeping the same high quality. It also supports stem extraction that allows users to extract vocals, beats, bass, piano, synthesizer, and guitar. The free plan supports beat extraction for up to 10 minutes. When you upgrade to the paid plan, you now get up to 300 minutes.

Pros

• Supports step extraction, allowing you to extract various audio components
• Simple and fast instrumental extractor
• Pocket-friendly plans

Cons

• No audio editing function
• Limited free plan

Part 2. How to Extract Beat From Song Tutorial: Two Ways

While each of the tools is effective in removing beats from your favorite songs, media.io and UniConverter stand out as having some of the best features. They are easy to use and provide accurate results within a short time.

How to Extract Beat from Song Tutorial

• 1. How to Extract Beats from Songs Using Media.io
• 2. How to Extract Beats from Songs Using UniConverter

1. How to Extract Beats from Songs Using Media.io

Media.io is a great tool for removing beats from songs. It produces high-quality musical vocals and instrumentals while preserving the integrity of the original tracks. Here are the steps to follow:

Step 1Visit Media.io

Got to the Media.io official website. Then upload the audio file you want to process.

Step 2Start Vocal and Background Music Feature

On the left side of the site, select “Vocal & Background Music.” Then click “Separate Now” to start extracting the best from your audio file.

Step 3Download Processed Files

After the processing is complete, the audio will be separated into vocals and background music or the beats. Finally, click the download button.

2. How to Extract Beats from Songs Using UniConverter

With UniConverter, extracting beats from songs is quick and easy on your PC. The program uses advanced AI to quickly scan files and separate vocals and beats from a song without losing the quality. Here are the steps to follow:

Step 1Launch UniConverter

Install and run the UniConverter software on your PC. Tap tools on the left menu bar and click on the “Vocal Remover” from the “AI Lab” section.

Step 2Upload Your Files

Drag and drop your audio file or sound soundtrack on the UniConverter workspace. Then click “Add Files” to browse and upload the files you want to process. The AI instrumental remover automatically scans your file to separate the vocals and beats from the song.

Step 3Export the Processed Files

Once the files have been processed, preview the vocals and beats to see if it is what you really want. Tap “Export” to save the processed files to your selected file location. The entire process takes only a few minutes.

Part 3. Extract Beats from Songs with Wondershare Filmora

Extracting beats from songs becomes easier with more advanced software. Wondershare Filmora is one such software that comes with unique features for editing audio and videos. The recently released version 13 is particularly useful for automating most of the editing tasks. Powered by AI, Filmora’s features make it easy to edit audio and video while keeping the high quality. Let’s explore the audio editing feature that will help you extract beats and further edit your audio.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

1. AI Vocal Remover

Removing beats from your songs is made easier with the AI Vocal Remover feature. The feature automatically separates vocals and instrumentals from any songs. This means you can enjoy listening to the beats of your favorite songs without the vocals. The feature also helps in extracting acapella from music tracks, and dub videos freely within minutes. The best of it all, you get to keep the same high-quality beats from the songs.

2. AI Music Generator

In addition to extracting beats from songs and removing acapella, Filmora also allows you to generate music for your videos. The AI Music Generator feature will generate a musical masterpiece for you in seconds. You get to choose between different genres and styles. This AI feature also allows you to seamlessly edit your music creation on the go. Your videos become livelier and engaging to the viewers.

3. AI Copilot Editing

Another useful feature on Filmora is AI Copilot Editing, which makes it easy for you to edit your audio and video. You only need to ask Filmora to perform a certain editing task, and it will do the rest of the work for you. This streamlines your editing process by offering real-time guidance and prevents common errors by detecting conflicting messages. The Copilot also optimizes your workflow by providing valuable AI insights and support on every step of video editing.

Conclusion

When you want to extract beat from song, choosing good software will make the entire process easier. The methods shared here demonstrate how different tools can be used to separate vocals and beats in an audio file. Each uses a different approach and provides a certain quality level of output. However, we recommend Wondershare Filmora because of its phenomenal audio and editing features. In addition to extracting beats from your favorite songs, the software allows you to edit the files further for other purposes.

Free Download Free Download Learn More

Part 1. Best Tools to Extract Beats from Songs Like a Pro: The Ultimate Guide

Choosing a beat remover from song tool can be easier when you know the options available. Some of the tools allow you to remove the beat online while others work perfectly online. Let’s explore the top five tools, including the pros and cons for each:

• Media.io
• UniConverter
• Audacity
• PhonicMind
• Lalal.ai

1. Media.io

Media.io is a reliable beat remover from a song. The online tool is commonly used as an MP3 voice remover but also has a range of other effective features. It is AI-powered, which helps to provide quality output in a timely manner. Quickly get your instrumental songs for free with no software or app required.

Pros

• Easy-to-use software that removes beats from songs accurately
• Automatically extracts beats from standard video and audio formats
• Offers additional audio editing tools like compressing and trimming
• Convenient to share with smart output settings

Cons

• File upload is limited to 100MB only

2. UniConverter

UniConnverter is an effective video converter and compressor that works well in removing beats from a song. Enriched with over 20 lightweight features, the software effectively edits 4K, 8K, and HDR files. The software has many uses, including instrumental extractors for practicing karaoke performance or even embedding beats in the background of your TikTok video.

Pros

• Ultra-fast removal of beats and processing of audio
• Effectively separates vocals and beats in song and other audio files
• A video-to-audio conversion tool

Cons

• A bit costly

3. Audacity

This is one of the best and easiest ways to remove beat from song online. It is a popular choice for beginners and professionals because all features are on the same platform. Being a free and open-source program, Audacity is a great choice for editing audio professionally. It comes with all audio editing features, including instrumental or beat extractor. Simply use the remove vocal options on the program to achieve quality audio output.

Pros

• Free, open-source beat and instrumental extractor
• Supports a wide range of audio formats
• No file size limit required

Cons

• Doesn’t support video formats
• Not beginner-friendly

4. PhonicMind

This is a quick and simple online tool for extracting beats from a song online. It supports all the standard audio formats and prepares download MP3 files. PhonicMind also allows you to download the beats file in MP4, ZIP, and FLAC using the Pro Plan. As an online instrumental extractor, PhonicMind also works well with stem extraction that supports vocals, piano, bass, drums, and many more with intuitive features for Android and iPhones.

Pros

• Supports stem extraction
• Multiple audio input formats
• Simple to use and process beats

Cons

• Free users can only export the output in MP3
• 100MB file limit

5. Lalal.ai

This is a simple and free program for extracting beats from a song. The ad-free online program allows you to extract beats and vocals within minutes while keeping the same high quality. It also supports stem extraction that allows users to extract vocals, beats, bass, piano, synthesizer, and guitar. The free plan supports beat extraction for up to 10 minutes. When you upgrade to the paid plan, you now get up to 300 minutes.

Pros

• Supports step extraction, allowing you to extract various audio components
• Simple and fast instrumental extractor
• Pocket-friendly plans

Cons

• No audio editing function
• Limited free plan

Part 2. How to Extract Beat From Song Tutorial: Two Ways

While each of the tools is effective in removing beats from your favorite songs, media.io and UniConverter stand out as having some of the best features. They are easy to use and provide accurate results within a short time.

How to Extract Beat from Song Tutorial

• 1. How to Extract Beats from Songs Using Media.io
• 2. How to Extract Beats from Songs Using UniConverter

1. How to Extract Beats from Songs Using Media.io

Media.io is a great tool for removing beats from songs. It produces high-quality musical vocals and instrumentals while preserving the integrity of the original tracks. Here are the steps to follow:

Step 1Visit Media.io

Got to the Media.io official website. Then upload the audio file you want to process.

Step 2Start Vocal and Background Music Feature

On the left side of the site, select “Vocal & Background Music.” Then click “Separate Now” to start extracting the best from your audio file.

Step 3Download Processed Files

After the processing is complete, the audio will be separated into vocals and background music or the beats. Finally, click the download button.

2. How to Extract Beats from Songs Using UniConverter

With UniConverter, extracting beats from songs is quick and easy on your PC. The program uses advanced AI to quickly scan files and separate vocals and beats from a song without losing the quality. Here are the steps to follow:

Step 1Launch UniConverter

Install and run the UniConverter software on your PC. Tap tools on the left menu bar and click on the “Vocal Remover” from the “AI Lab” section.

Step 2Upload Your Files

Drag and drop your audio file or sound soundtrack on the UniConverter workspace. Then click “Add Files” to browse and upload the files you want to process. The AI instrumental remover automatically scans your file to separate the vocals and beats from the song.

Step 3Export the Processed Files

Once the files have been processed, preview the vocals and beats to see if it is what you really want. Tap “Export” to save the processed files to your selected file location. The entire process takes only a few minutes.

Part 3. Extract Beats from Songs with Wondershare Filmora

Extracting beats from songs becomes easier with more advanced software. Wondershare Filmora is one such software that comes with unique features for editing audio and videos. The recently released version 13 is particularly useful for automating most of the editing tasks. Powered by AI, Filmora’s features make it easy to edit audio and video while keeping the high quality. Let’s explore the audio editing feature that will help you extract beats and further edit your audio.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

1. AI Vocal Remover

Removing beats from your songs is made easier with the AI Vocal Remover feature. The feature automatically separates vocals and instrumentals from any songs. This means you can enjoy listening to the beats of your favorite songs without the vocals. The feature also helps in extracting acapella from music tracks, and dub videos freely within minutes. The best of it all, you get to keep the same high-quality beats from the songs.

2. AI Music Generator

In addition to extracting beats from songs and removing acapella, Filmora also allows you to generate music for your videos. The AI Music Generator feature will generate a musical masterpiece for you in seconds. You get to choose between different genres and styles. This AI feature also allows you to seamlessly edit your music creation on the go. Your videos become livelier and engaging to the viewers.

3. AI Copilot Editing

Another useful feature on Filmora is AI Copilot Editing, which makes it easy for you to edit your audio and video. You only need to ask Filmora to perform a certain editing task, and it will do the rest of the work for you. This streamlines your editing process by offering real-time guidance and prevents common errors by detecting conflicting messages. The Copilot also optimizes your workflow by providing valuable AI insights and support on every step of video editing.

Conclusion

When you want to extract beat from song, choosing good software will make the entire process easier. The methods shared here demonstrate how different tools can be used to separate vocals and beats in an audio file. Each uses a different approach and provides a certain quality level of output. However, we recommend Wondershare Filmora because of its phenomenal audio and editing features. In addition to extracting beats from your favorite songs, the software allows you to edit the files further for other purposes.

Also read: