Effortless Audio Silencing: An Audacity User’s Manual

Removing vocals from audio tracks or songs can be tricky. You may want to create a video and need an instrumental track to add to the background. Maybe you are a content creator looking to remove vocals from a song and extract the instrumental parts for background music in various projects. The Audacity vocal remover makes it easy to achieve this. The vocal remover in Audacity is a great tool that brings satisfactory results without losing the quality of the original track. In this article, we explain two methods of vocal reduction and isolation Audacity and the steps you can follow to do the same in Filmora.

AI Vocal Remover A cross-platform for facilitating your video editing process by offering valuable benefits!

Free Download Free Download Learn More

Method 1: Remove Vocals Using Audacity Vocal Reduction Tool

The first method of removing vocals in Audacity is using the built-in vocal remover. This method is effective in completely removing vocals depending on how much processing is on the vocal. Even if the vocals are not completely removed, the method will reduce the volume significantly to give you great results. Let’s have a look at how to isolate vocal audacity with this method.

Step 1: Open Audacity

The first thing you need to do is open the Audacity software in preparation for the vocal removal.

Step 2: Import the Audio Track

Go to File > Import > Audio to import the audio track you want to edit.

Step 3: Select Audio Track

Select the song or audio track from which you want to remove the vocals. This allows Audacity to load the waveform of the track into the editor.

Step 4: Export as MP3

Backup the file so that you still have the whole song available for use later. Go to File > Export > Export as MP3. Audacity will export the track in the original file format. If it was a WAV audio file, the export will be to that type. This ensures that the audio artifacts are kept in the best condition for editing. Be sure to name the exported file in something you will easily remember.

Step 5: Import the New Audio File

Once you have exported the audio file, click “Close “on the original file. Then import the file you exported in the last step.

Step 6: Apply Vocal Reduction and Isolation

Click on Select, then Select All. On the Effect drop-down menu, select Audacity Vocal Reduction and Isolation.

Step 7: Remove Vocals

Click on the Action tab and select Remove Vocals. Wait for Audacity to remove the vocal and click Play to listen to the edited track. Audacity isolate vocals giving you clear instruments for your audio track or song file.

This method is a quick and easy way to remove vocals from any song in Audacity. It works best with any kind of song and will produce the edited track in just a matter of minutes. On the drawback, this method does not always wholly remove vocal and you may at times still hear bits of it. It may also remove other elements of the audio in addition to the vocal. Nonetheless, it is an effective approach that will work most of the time.

Method 2: Remove Vocals Using Audacity Splitting Audio Channels

When working with songs or audio tracks with vocals in one channel and instruments in another, this is the best method to use. The Audacity vocal remover plugin gives you a simple way to separate the vocals and other sounds in an audio file. However, you cannot tell song that has multiple channels simply by looking at or listening to it. Therefore, you can try this method with any of your files and see the quality of the outcome. Here are the steps for this audacity separate vocals method:

Step 1: Import Your File

Start by importing your audio track or song file into Audacity.

Step 2: Split Stereo to Mono

In the title of the audio, click the Down Arrow. Then select Split Stereo to Mono.

Step 3: Play Solo

Click on the Play button and choose Solo on each track. This allows you to see if there is any isolated vocal on either channel.

Step 4: Delete Isolated Vocal

From the results, delete the section that contains the isolated vocal from the Audacity session.

This alternative method is also effective in extract vocals Audacity. The main benefit is it has fewer steps than the first method. It will also completely remove vocals that are on their own channel. However, the method is limited in that it does not work for the vast majority of audio. It will only work for audio tracks with vols on one channel and instruments on another.

Alternative Way to Remove Vocals from Audio with Filmora

Another great option for removing vocals from a song is using Wondershare Filmora. The video editing software comes with some interesting features, including vocal removal. The recently released Filmora Version 13 is more versatile and user-friendly for better edits. With the integration of AI, users can automate vocal removal which would normally require a lot of time and incredible skill to execute. The AI in the software does this in a few minutes. Filmora also has some amazing features that automate video editing, allowing you to do more with less effort.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Quick Tutorial on Removing Vocals with Filmora

The AI Vocal Remover feature on Filmora separates vocals and music from any song or audio track. You can use this feature to extract any acapella from music tracks or dub videos freely by removing the vocals completely. The feature allows you to keep high-quality audio while removing the vocals. It uses advanced algorithms to isolate vocals while maintaining exceptional audio quality. This ensures that vocals are effectively separated from the background music, by audio fidelity is not lost. To remove vocals from your video or audio files, follow these simple steps:

Method 1: Filmora Top Toolbar

Step 1 – Launch Filmors and Create a New Projects

Click on the Filmora icon on your desktop to launch the software. Log in to sign up using the Profile icon at the top. Navigate to the control panel on the left side, and then choose the Create Project Option, and click New Project.

Step 2: Import Source Files and Add to Timeline

On the Main Filmora Interface, select Media from the custom toolbar. Then click Files and import the files you want to use to Filmora. Select the imported files, and drag and drop them into the timeline panel.

Step 3 – Enable AI Vocal Removal

Select the audio track or music clip you want to use in the timeline. Navigate toward the Tools tab at the top toolbar. Choose the Audio option from the drop-down menu and click on the AI Vocal Remover.

Method 2: Running AI Vocal Remover from the Timeline

Once you upload media Filmora, select the media that you want to remove vocal from. Then drag and drop it to the timeline panel. Right-click on the video and choose the AI Vocal Remover from the options panel. This will automatically remove vocals from the video.

Compared to Audacity, Filmora’s AI Vocal Remover tool is quick and easy to use. It will facilitate your video editing process by allowing you to remove vocals and use instrumentals on the go. For instance, this feature allows you to easily dub any video without having to cover up the current vocals. This means that your videos will be more entertaining and engaging while keeping great soundtracks. Match the energy in your videos with the quality of the instrumentals with just a few clicks.

Conclusion

Removing vocals from a video song or audio file gives you more freedom in your projects. You can use the audio as an instrumental or in other creative ways. Audacity is among the most popular vocal removers on the internet. It offers several ways to remove vocals clearly from your audio tracks or music files. Vocal isolation audacity is easy and takes only a few steps. However, we recommend the AI vocal remover feature by Filmora because it is more versatile and accurate. The automated feature takes care of everything for you when removing the vocals from your audio files. You also get to utilize other useful video editing features that automate mundane tasks.

Free Download Free Download Learn More

Method 1: Remove Vocals Using Audacity Vocal Reduction Tool

The first method of removing vocals in Audacity is using the built-in vocal remover. This method is effective in completely removing vocals depending on how much processing is on the vocal. Even if the vocals are not completely removed, the method will reduce the volume significantly to give you great results. Let’s have a look at how to isolate vocal audacity with this method.

Step 1: Open Audacity

The first thing you need to do is open the Audacity software in preparation for the vocal removal.

Step 2: Import the Audio Track

Go to File > Import > Audio to import the audio track you want to edit.

Step 3: Select Audio Track

Select the song or audio track from which you want to remove the vocals. This allows Audacity to load the waveform of the track into the editor.

Step 4: Export as MP3

Backup the file so that you still have the whole song available for use later. Go to File > Export > Export as MP3. Audacity will export the track in the original file format. If it was a WAV audio file, the export will be to that type. This ensures that the audio artifacts are kept in the best condition for editing. Be sure to name the exported file in something you will easily remember.

Step 5: Import the New Audio File

Once you have exported the audio file, click “Close “on the original file. Then import the file you exported in the last step.

Step 6: Apply Vocal Reduction and Isolation

Click on Select, then Select All. On the Effect drop-down menu, select Audacity Vocal Reduction and Isolation.

Step 7: Remove Vocals

Click on the Action tab and select Remove Vocals. Wait for Audacity to remove the vocal and click Play to listen to the edited track. Audacity isolate vocals giving you clear instruments for your audio track or song file.

This method is a quick and easy way to remove vocals from any song in Audacity. It works best with any kind of song and will produce the edited track in just a matter of minutes. On the drawback, this method does not always wholly remove vocal and you may at times still hear bits of it. It may also remove other elements of the audio in addition to the vocal. Nonetheless, it is an effective approach that will work most of the time.

Method 2: Remove Vocals Using Audacity Splitting Audio Channels

When working with songs or audio tracks with vocals in one channel and instruments in another, this is the best method to use. The Audacity vocal remover plugin gives you a simple way to separate the vocals and other sounds in an audio file. However, you cannot tell song that has multiple channels simply by looking at or listening to it. Therefore, you can try this method with any of your files and see the quality of the outcome. Here are the steps for this audacity separate vocals method:

Step 1: Import Your File

Start by importing your audio track or song file into Audacity.

Step 2: Split Stereo to Mono

In the title of the audio, click the Down Arrow. Then select Split Stereo to Mono.

Step 3: Play Solo

Click on the Play button and choose Solo on each track. This allows you to see if there is any isolated vocal on either channel.

Step 4: Delete Isolated Vocal

From the results, delete the section that contains the isolated vocal from the Audacity session.

This alternative method is also effective in extract vocals Audacity. The main benefit is it has fewer steps than the first method. It will also completely remove vocals that are on their own channel. However, the method is limited in that it does not work for the vast majority of audio. It will only work for audio tracks with vols on one channel and instruments on another.

Alternative Way to Remove Vocals from Audio with Filmora

Another great option for removing vocals from a song is using Wondershare Filmora. The video editing software comes with some interesting features, including vocal removal. The recently released Filmora Version 13 is more versatile and user-friendly for better edits. With the integration of AI, users can automate vocal removal which would normally require a lot of time and incredible skill to execute. The AI in the software does this in a few minutes. Filmora also has some amazing features that automate video editing, allowing you to do more with less effort.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Quick Tutorial on Removing Vocals with Filmora

The AI Vocal Remover feature on Filmora separates vocals and music from any song or audio track. You can use this feature to extract any acapella from music tracks or dub videos freely by removing the vocals completely. The feature allows you to keep high-quality audio while removing the vocals. It uses advanced algorithms to isolate vocals while maintaining exceptional audio quality. This ensures that vocals are effectively separated from the background music, by audio fidelity is not lost. To remove vocals from your video or audio files, follow these simple steps:

Method 1: Filmora Top Toolbar

Step 1 – Launch Filmors and Create a New Projects

Click on the Filmora icon on your desktop to launch the software. Log in to sign up using the Profile icon at the top. Navigate to the control panel on the left side, and then choose the Create Project Option, and click New Project.

Step 2: Import Source Files and Add to Timeline

On the Main Filmora Interface, select Media from the custom toolbar. Then click Files and import the files you want to use to Filmora. Select the imported files, and drag and drop them into the timeline panel.

Step 3 – Enable AI Vocal Removal

Select the audio track or music clip you want to use in the timeline. Navigate toward the Tools tab at the top toolbar. Choose the Audio option from the drop-down menu and click on the AI Vocal Remover.

Method 2: Running AI Vocal Remover from the Timeline

Once you upload media Filmora, select the media that you want to remove vocal from. Then drag and drop it to the timeline panel. Right-click on the video and choose the AI Vocal Remover from the options panel. This will automatically remove vocals from the video.

Compared to Audacity, Filmora’s AI Vocal Remover tool is quick and easy to use. It will facilitate your video editing process by allowing you to remove vocals and use instrumentals on the go. For instance, this feature allows you to easily dub any video without having to cover up the current vocals. This means that your videos will be more entertaining and engaging while keeping great soundtracks. Match the energy in your videos with the quality of the instrumentals with just a few clicks.

Conclusion

Removing vocals from a video song or audio file gives you more freedom in your projects. You can use the audio as an instrumental or in other creative ways. Audacity is among the most popular vocal removers on the internet. It offers several ways to remove vocals clearly from your audio tracks or music files. Vocal isolation audacity is easy and takes only a few steps. However, we recommend the AI vocal remover feature by Filmora because it is more versatile and accurate. The automated feature takes care of everything for you when removing the vocals from your audio files. You also get to utilize other useful video editing features that automate mundane tasks.

Achieving Perfect Ambience: Fading and Brightening Sound with Keyframes in Filmora (Mac)

How to Fade In/Out Audio with Keyframes in Filmora for Mac

Benjamin Arango

Aug 18, 2022• Proven solutions

Not just professionals but beginners can also step into the planet of animation if one comes to know about the basics, advanced editing tips, and other associated concepts relating to video creation. Trimming, scaling, audio ducking, screen recording, masking, and yes, don’t forget the primary process that is keyframing; you should try everything to come out with bright colors. Yes, to understand and excel in animation, you must know how to execute it hassle-free.

If you have Mac, you would be familiar with Final Cut Pro X and its related audio functionalities. However, if you need a perfect alternative that could perform outstanding audio keyframing, we would like to suggest Wondershare Filmora for Mac. Yes, adding an audio keyframe in Wondershare Filmora is easy and you do not need to search for an ultimate guide as we are here to fill up the space. Alongside, you will also learn how to perform some of the functions like fade audio in/out.

Part 1: How to Add Audio Keyframes in Wondershare Filmora for Mac?

Is adding an audio keyframe in Wondershare Filmora for Mac easy? Else is the interface too tough to follow? Keep your confusion aside and take a look at the below step-by-step guide on how to perform audio keyframing in Wondershare Filmora for Mac.

Step 1: Launch to Add Media Files

Launch or open the Wondershare Filmora on your Mac. Then, add a media file or the video file into the work panel by dragging-dropping the file into the timeline.

You can also execute “File > Import Media > Import media files” to bring the files into the timeline.

Step 2: Edit Audio

Once your video reaches the timeline, double-clicking on it will take you to the editing menu to choose the “Audio” tab.

Increase or decrease the volume level based on which the clips should play.

Step 3: Adjust Volume and Add Keyframe

Place the pointer on the timeline where you want to add an audio keyframe. Then double-click the audio clip that will again redirect you to the Audio panel.

Now, click on the keyframe icon on the left side panel, make the volume adjustment on the timeline by dragging the volume envelope, and tapping the “OK” button.

To add the second audio keyframe, move the playhead to the desired spot, and once done, perform step 3 again.

Part 2: How to Modify Audio Keyframes in Filmora for Mac?

Not only adding an audio keyframe is possible in Wondershare Filmora for Mac, but modifying or adjust the audio keyframe is possible as well.

Step 1: Modify Audio Keyframe

The easy option of modifying the audio keyframe is from the Audio panel that will navigate by double-clicking on the audio keyframe created on the timeline.

Yes, from the options provided, you can slide the parameters like pitch, equalizer, ducking, and denoise if required to modify the keyframe.

Yes, in the upcoming session, we can see how to fade audio with keyframes, but here let’s look at the other options.

Step 2: Change Soundwaves

Audio is a mix up of speech, music, etc. Changing the sound waves would bring out a different keyframe. To do so, you can tap on the inverted triangle next to the Equalizer option that will offer you various options like classic, dance, soft, techno, and a lot more.

Step 3: Remove Background Noise

To remove unwanted background noise, you can tick the “Remove Background Noise” checkbox that will offer you three options: Weak, Mild, and Strong.

Step 4: Edit the Volume

If you want to lower the volume of other clips in the video, you can use the “Lower the volume of other clips” checkbox next to the ducking option.

It’s not just one, but Filmora offers five attractive choices to modify the created audio keyframe.

Part 3: How to Fade In/Out Audio with Keyframes in Filmora for Mac?

Now that you are familiar with the method to add Filmora keyframes for audio and modifying them, here is a particular part of how you can fade audio with keyframes. As it is a special effect with audio keyframe, we have framed a special session with the two methods offered by Wondershare Filmora for Mac.

Method 1

Step 1: Once you created the audio keyframe or double-clicked the video spot where you want to make the keyframe, you will land on the audio panel like the below interface.

Step 2: To fade audio in keyframe once accessing the audio settings, drag or slide the pointer on the “Fadein” option to the right to set the duration.

Step 3: To fade audio out, you can use the slider next to the “Fadeout” option to set the duration.

Method 2

• You can directly apply the fade in/out in the audio keyframe on the timeline. Once you place the video, the audio track will appear where you can see the icon - the Fade option above the audio waveform.
• Dragging the fade audio in the handle at the beginning of the clip will impose the effect and set its duration automatically. Pulling the fade audio out handle at the end of the clip will impose the fade-out effect.

Conclusion

No doubt, Wondershare Filmora is the best choice to carry over your audio keyframing process. You can customize your creations as per your requirement or need, and Filmora comes in handy as well. Along with practical interpretation on adding an audio keyframe and fading audio with keywords, I hope we have resolved the need for an external guide to proceed with the editing process. It’s not just with the process of keyframing, but Wondershare Filmora can do wonders to your design, and so, with no delay, try it out today for free!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Aug 18, 2022• Proven solutions

Not just professionals but beginners can also step into the planet of animation if one comes to know about the basics, advanced editing tips, and other associated concepts relating to video creation. Trimming, scaling, audio ducking, screen recording, masking, and yes, don’t forget the primary process that is keyframing; you should try everything to come out with bright colors. Yes, to understand and excel in animation, you must know how to execute it hassle-free.

If you have Mac, you would be familiar with Final Cut Pro X and its related audio functionalities. However, if you need a perfect alternative that could perform outstanding audio keyframing, we would like to suggest Wondershare Filmora for Mac. Yes, adding an audio keyframe in Wondershare Filmora is easy and you do not need to search for an ultimate guide as we are here to fill up the space. Alongside, you will also learn how to perform some of the functions like fade audio in/out.

Part 1: How to Add Audio Keyframes in Wondershare Filmora for Mac?

Is adding an audio keyframe in Wondershare Filmora for Mac easy? Else is the interface too tough to follow? Keep your confusion aside and take a look at the below step-by-step guide on how to perform audio keyframing in Wondershare Filmora for Mac.

Step 1: Launch to Add Media Files

Launch or open the Wondershare Filmora on your Mac. Then, add a media file or the video file into the work panel by dragging-dropping the file into the timeline.

You can also execute “File > Import Media > Import media files” to bring the files into the timeline.

Step 2: Edit Audio

Once your video reaches the timeline, double-clicking on it will take you to the editing menu to choose the “Audio” tab.

Increase or decrease the volume level based on which the clips should play.

Step 3: Adjust Volume and Add Keyframe

Place the pointer on the timeline where you want to add an audio keyframe. Then double-click the audio clip that will again redirect you to the Audio panel.

Now, click on the keyframe icon on the left side panel, make the volume adjustment on the timeline by dragging the volume envelope, and tapping the “OK” button.

To add the second audio keyframe, move the playhead to the desired spot, and once done, perform step 3 again.

Part 2: How to Modify Audio Keyframes in Filmora for Mac?

Not only adding an audio keyframe is possible in Wondershare Filmora for Mac, but modifying or adjust the audio keyframe is possible as well.

Step 1: Modify Audio Keyframe

The easy option of modifying the audio keyframe is from the Audio panel that will navigate by double-clicking on the audio keyframe created on the timeline.

Yes, from the options provided, you can slide the parameters like pitch, equalizer, ducking, and denoise if required to modify the keyframe.

Yes, in the upcoming session, we can see how to fade audio with keyframes, but here let’s look at the other options.

Step 2: Change Soundwaves

Audio is a mix up of speech, music, etc. Changing the sound waves would bring out a different keyframe. To do so, you can tap on the inverted triangle next to the Equalizer option that will offer you various options like classic, dance, soft, techno, and a lot more.

Step 3: Remove Background Noise

To remove unwanted background noise, you can tick the “Remove Background Noise” checkbox that will offer you three options: Weak, Mild, and Strong.

Step 4: Edit the Volume

If you want to lower the volume of other clips in the video, you can use the “Lower the volume of other clips” checkbox next to the ducking option.

It’s not just one, but Filmora offers five attractive choices to modify the created audio keyframe.

Part 3: How to Fade In/Out Audio with Keyframes in Filmora for Mac?

Now that you are familiar with the method to add Filmora keyframes for audio and modifying them, here is a particular part of how you can fade audio with keyframes. As it is a special effect with audio keyframe, we have framed a special session with the two methods offered by Wondershare Filmora for Mac.

Method 1

Step 1: Once you created the audio keyframe or double-clicked the video spot where you want to make the keyframe, you will land on the audio panel like the below interface.

Step 2: To fade audio in keyframe once accessing the audio settings, drag or slide the pointer on the “Fadein” option to the right to set the duration.

Step 3: To fade audio out, you can use the slider next to the “Fadeout” option to set the duration.

Method 2

• You can directly apply the fade in/out in the audio keyframe on the timeline. Once you place the video, the audio track will appear where you can see the icon - the Fade option above the audio waveform.
• Dragging the fade audio in the handle at the beginning of the clip will impose the effect and set its duration automatically. Pulling the fade audio out handle at the end of the clip will impose the fade-out effect.

Conclusion

No doubt, Wondershare Filmora is the best choice to carry over your audio keyframing process. You can customize your creations as per your requirement or need, and Filmora comes in handy as well. Along with practical interpretation on adding an audio keyframe and fading audio with keywords, I hope we have resolved the need for an external guide to proceed with the editing process. It’s not just with the process of keyframing, but Wondershare Filmora can do wonders to your design, and so, with no delay, try it out today for free!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Aug 18, 2022• Proven solutions

Not just professionals but beginners can also step into the planet of animation if one comes to know about the basics, advanced editing tips, and other associated concepts relating to video creation. Trimming, scaling, audio ducking, screen recording, masking, and yes, don’t forget the primary process that is keyframing; you should try everything to come out with bright colors. Yes, to understand and excel in animation, you must know how to execute it hassle-free.

If you have Mac, you would be familiar with Final Cut Pro X and its related audio functionalities. However, if you need a perfect alternative that could perform outstanding audio keyframing, we would like to suggest Wondershare Filmora for Mac. Yes, adding an audio keyframe in Wondershare Filmora is easy and you do not need to search for an ultimate guide as we are here to fill up the space. Alongside, you will also learn how to perform some of the functions like fade audio in/out.

Part 1: How to Add Audio Keyframes in Wondershare Filmora for Mac?

Is adding an audio keyframe in Wondershare Filmora for Mac easy? Else is the interface too tough to follow? Keep your confusion aside and take a look at the below step-by-step guide on how to perform audio keyframing in Wondershare Filmora for Mac.

Step 1: Launch to Add Media Files

Launch or open the Wondershare Filmora on your Mac. Then, add a media file or the video file into the work panel by dragging-dropping the file into the timeline.

You can also execute “File > Import Media > Import media files” to bring the files into the timeline.

Step 2: Edit Audio

Once your video reaches the timeline, double-clicking on it will take you to the editing menu to choose the “Audio” tab.

Increase or decrease the volume level based on which the clips should play.

Step 3: Adjust Volume and Add Keyframe

Place the pointer on the timeline where you want to add an audio keyframe. Then double-click the audio clip that will again redirect you to the Audio panel.

Now, click on the keyframe icon on the left side panel, make the volume adjustment on the timeline by dragging the volume envelope, and tapping the “OK” button.

To add the second audio keyframe, move the playhead to the desired spot, and once done, perform step 3 again.

Part 2: How to Modify Audio Keyframes in Filmora for Mac?

Not only adding an audio keyframe is possible in Wondershare Filmora for Mac, but modifying or adjust the audio keyframe is possible as well.

Step 1: Modify Audio Keyframe

The easy option of modifying the audio keyframe is from the Audio panel that will navigate by double-clicking on the audio keyframe created on the timeline.

Yes, from the options provided, you can slide the parameters like pitch, equalizer, ducking, and denoise if required to modify the keyframe.

Yes, in the upcoming session, we can see how to fade audio with keyframes, but here let’s look at the other options.

Step 2: Change Soundwaves

Audio is a mix up of speech, music, etc. Changing the sound waves would bring out a different keyframe. To do so, you can tap on the inverted triangle next to the Equalizer option that will offer you various options like classic, dance, soft, techno, and a lot more.

Step 3: Remove Background Noise

To remove unwanted background noise, you can tick the “Remove Background Noise” checkbox that will offer you three options: Weak, Mild, and Strong.

Step 4: Edit the Volume

If you want to lower the volume of other clips in the video, you can use the “Lower the volume of other clips” checkbox next to the ducking option.

It’s not just one, but Filmora offers five attractive choices to modify the created audio keyframe.

Part 3: How to Fade In/Out Audio with Keyframes in Filmora for Mac?

Now that you are familiar with the method to add Filmora keyframes for audio and modifying them, here is a particular part of how you can fade audio with keyframes. As it is a special effect with audio keyframe, we have framed a special session with the two methods offered by Wondershare Filmora for Mac.

Method 1

Step 1: Once you created the audio keyframe or double-clicked the video spot where you want to make the keyframe, you will land on the audio panel like the below interface.

Step 2: To fade audio in keyframe once accessing the audio settings, drag or slide the pointer on the “Fadein” option to the right to set the duration.

Step 3: To fade audio out, you can use the slider next to the “Fadeout” option to set the duration.

Method 2

• You can directly apply the fade in/out in the audio keyframe on the timeline. Once you place the video, the audio track will appear where you can see the icon - the Fade option above the audio waveform.
• Dragging the fade audio in the handle at the beginning of the clip will impose the effect and set its duration automatically. Pulling the fade audio out handle at the end of the clip will impose the fade-out effect.

Conclusion

No doubt, Wondershare Filmora is the best choice to carry over your audio keyframing process. You can customize your creations as per your requirement or need, and Filmora comes in handy as well. Along with practical interpretation on adding an audio keyframe and fading audio with keywords, I hope we have resolved the need for an external guide to proceed with the editing process. It’s not just with the process of keyframing, but Wondershare Filmora can do wonders to your design, and so, with no delay, try it out today for free!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Aug 18, 2022• Proven solutions

Not just professionals but beginners can also step into the planet of animation if one comes to know about the basics, advanced editing tips, and other associated concepts relating to video creation. Trimming, scaling, audio ducking, screen recording, masking, and yes, don’t forget the primary process that is keyframing; you should try everything to come out with bright colors. Yes, to understand and excel in animation, you must know how to execute it hassle-free.

If you have Mac, you would be familiar with Final Cut Pro X and its related audio functionalities. However, if you need a perfect alternative that could perform outstanding audio keyframing, we would like to suggest Wondershare Filmora for Mac. Yes, adding an audio keyframe in Wondershare Filmora is easy and you do not need to search for an ultimate guide as we are here to fill up the space. Alongside, you will also learn how to perform some of the functions like fade audio in/out.

Part 1: How to Add Audio Keyframes in Wondershare Filmora for Mac?

Is adding an audio keyframe in Wondershare Filmora for Mac easy? Else is the interface too tough to follow? Keep your confusion aside and take a look at the below step-by-step guide on how to perform audio keyframing in Wondershare Filmora for Mac.

Step 1: Launch to Add Media Files

Launch or open the Wondershare Filmora on your Mac. Then, add a media file or the video file into the work panel by dragging-dropping the file into the timeline.

You can also execute “File > Import Media > Import media files” to bring the files into the timeline.

Step 2: Edit Audio

Once your video reaches the timeline, double-clicking on it will take you to the editing menu to choose the “Audio” tab.

Increase or decrease the volume level based on which the clips should play.

Step 3: Adjust Volume and Add Keyframe

Place the pointer on the timeline where you want to add an audio keyframe. Then double-click the audio clip that will again redirect you to the Audio panel.

Now, click on the keyframe icon on the left side panel, make the volume adjustment on the timeline by dragging the volume envelope, and tapping the “OK” button.

To add the second audio keyframe, move the playhead to the desired spot, and once done, perform step 3 again.

Part 2: How to Modify Audio Keyframes in Filmora for Mac?

Not only adding an audio keyframe is possible in Wondershare Filmora for Mac, but modifying or adjust the audio keyframe is possible as well.

Step 1: Modify Audio Keyframe

The easy option of modifying the audio keyframe is from the Audio panel that will navigate by double-clicking on the audio keyframe created on the timeline.

Yes, from the options provided, you can slide the parameters like pitch, equalizer, ducking, and denoise if required to modify the keyframe.

Yes, in the upcoming session, we can see how to fade audio with keyframes, but here let’s look at the other options.

Step 2: Change Soundwaves

Audio is a mix up of speech, music, etc. Changing the sound waves would bring out a different keyframe. To do so, you can tap on the inverted triangle next to the Equalizer option that will offer you various options like classic, dance, soft, techno, and a lot more.

Step 3: Remove Background Noise

To remove unwanted background noise, you can tick the “Remove Background Noise” checkbox that will offer you three options: Weak, Mild, and Strong.

Step 4: Edit the Volume

If you want to lower the volume of other clips in the video, you can use the “Lower the volume of other clips” checkbox next to the ducking option.

It’s not just one, but Filmora offers five attractive choices to modify the created audio keyframe.

Part 3: How to Fade In/Out Audio with Keyframes in Filmora for Mac?

Now that you are familiar with the method to add Filmora keyframes for audio and modifying them, here is a particular part of how you can fade audio with keyframes. As it is a special effect with audio keyframe, we have framed a special session with the two methods offered by Wondershare Filmora for Mac.

Method 1

Step 1: Once you created the audio keyframe or double-clicked the video spot where you want to make the keyframe, you will land on the audio panel like the below interface.

Step 2: To fade audio in keyframe once accessing the audio settings, drag or slide the pointer on the “Fadein” option to the right to set the duration.

Step 3: To fade audio out, you can use the slider next to the “Fadeout” option to set the duration.

Method 2

• You can directly apply the fade in/out in the audio keyframe on the timeline. Once you place the video, the audio track will appear where you can see the icon - the Fade option above the audio waveform.
• Dragging the fade audio in the handle at the beginning of the clip will impose the effect and set its duration automatically. Pulling the fade audio out handle at the end of the clip will impose the fade-out effect.

Conclusion

No doubt, Wondershare Filmora is the best choice to carry over your audio keyframing process. You can customize your creations as per your requirement or need, and Filmora comes in handy as well. Along with practical interpretation on adding an audio keyframe and fading audio with keywords, I hope we have resolved the need for an external guide to proceed with the editing process. It’s not just with the process of keyframing, but Wondershare Filmora can do wonders to your design, and so, with no delay, try it out today for free!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

The Ultimate Guide: Disabling Audio for Windows 10 Films Without Extras

You might need to remove sound from video windows 10. However, you may be confused about which tools you should you. Indeed, plenty of video editing tools have complicated user interfaces, which is not good if you are a beginner. Fortunately, in this article, we will recommend some of the reliable tools you can use to remove audio from video windows 10—additionally, a simple guide on how to do it.

Method 1: Use online and free solutions to mute audio in videos (500 words)

1. Kapwing

Kapwing is an easy-to-use but powerful online tool for remove sound from video windows 10. Furthermore, Kapwing has many different features you can use for all sorts of things. Such as making videos, adding subtitles to videos, filtering videos, adding watermarks to videos, and many more.

How to mute audio in videos with Kapwing

Step1 To begin, launch your web browser and search the website Kapwing.com. After that, select “Tool” from the menu.

Step2 in the search bar, type “Mute video” and click on it when the mute video feature pops up.

Step3 Click “upload video” in the next window to add the video you want to mute.

Step4 Once you upload your video, click your video, and you will see the volume feature. You just need to drag the volume to the most left to mute the audio.

Step5 Once you mute the movie audio, click “Export project.”

Step6 When the exporting project is done, you can save your video on your computer by clicking “download file.”

2. Veed.io

VEED is a windows video editor remove audio that makes it easy to remove the sound from a video. You can mute the whole video or just a part of it. There’s no software to install. You can do it right in your browser. VEED, on the other hand, is free and very simple to use.

How to remove mute audio from video with VEED.io

Step1 Open your browser and type “Remove audio mute VEED” into the search bar. After that, click “Choose video” to import the video you want to mute.

Step2 When you’re on the editing page, you’ll see a sound icon. Click that, and then drag the sound bar down to remove the sound. Once you remove the sound, click “Export” in the top right of your screen.

Step3 When the video exporting process is done, you can save the video you edited on your computer by clicking “Download.”

3. Adobe Express

Adobe Express is another tool for remove audio from video windows. You can use to remove sound from your videos. has an easy-to-use interface that makes removing sound in a video only a few steps.

How to remove audio from the video with Adobe Express

Step1 Open your browser and search for “Remove audio with Adobe Express”. In the next window, click “Upload your video” to import your video.

Step2 On the next page, you will see your video, and you will see the option “Mute” press that button to remove the sound on your video. Once you remove the audio from your video, click “download” to save your video.

Method 2: Use Filmora to remove audio from video

Step1 Before going any further, you need to download Filmora and open it on your computer. When you’re done, click “new project.”

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step2 In this step, you need to find the video you want to mute on your computer and import it to Filmora. Then, drag your video onto Filmora’s timeline.

Step3 Once you’ve dragged your video onto Filmora’s timeline, click on your video in the timeline and then right-click. Afterwards, choose “detach audio.”

Step4 Now, you will see the audio track below the video track. Simply, click on the audio track and click the “delete” icon. Finally, you are successful in muting the audio from your video.

Step5 Click “Export” to save your video on your computer.

Beside Filmora allow you to mute audio from entire of the video, Filmora also has another audio modify feature called “Silence detection”. Silence Detection is a special add-on for Filmora users, making it easier to cut out silent parts of a video. Silence Detection is a unique Filmora add-on that makes it easier for users to remove silent pauses from a film. The add-on examines the full video to detect all the silent pauses and eliminates them instantly, saving you time and simplifying the editing process.

How to use silence detection?

Step1 Right-click on the clip in the resource, select the video clip on the timeline, and choose the silence detection option to open up the silence detection window.

Step2 The silent detection tool will automatically detect the silent and low sound points.

Furthermore, you can adjust the parameters to recalculate the silence detection or manually fine-tune what the feature has already detected

once everything sounds good, export the video into the Filmora timeline so you can continue editing your video.

Moreover, Filmora also has another feature called “Audio ducking”. Audio ducking is a way to turn down the volume of the background when one voiceover comes on.

How to use audio ducking with Filmora

Step1 Let’s say you already have your voiceover and the audio in your video. If you want you to use duking voice feature, firstly, you need to decide which part of the audio you want to lower. After that, double-click the selected part until the ducking voice feature comes out.

Step2 Next, you just need to drag the audio ducking bar to the left or right. Indeed, if you drag to the right, it will lower the audio. Once you are done adjusting the audio, click “Ok”, and you can preview the result.

Last but not least, Filmora has other features called TTS and STT. Speech to Text (STT) allows you to transcript voice to subtitles in one click. Using speech-to-text will save you a lot of time on subtitling and speed up the editing process. Meanwhile, Text to Speech (TTS) is a feature in Filmora that lets you turn text files into voiceover and add more elements to your video.

How to use STT with Filmora

Step1 Firstly, right-click on the audio track and choose “Speech-to-Text”.

Step2 In the STT parameter setting bar, you can choose the language of the audio to be transcribed and the files to be converted. You can also choose to match automatically to the timeline.

How to use TTS with Filmore

Step1 Go to the “Tittle” and add you default Title. After that, write anything you want.

Step2 Select the title box in the timeline, then right-click. After that, click on “Text-to-Speech”.

Step3 In the TTS parameter setting bar, choose the language this title is in and the voice’s name.

Method 3: Use Windows 10 officially recommend video editor

1. Climpchamp

Clipchamp is an online video editor that makes it easy for anyone to make videos, even if they have never edited before. It lets you combine your videos, images, and audio files, remove audio from the video and then save the finished video to your computer. On the Climpchamp homepage, you can sign up for a free account and start editing your videos right away.

How to mute audio from the video with Climpchamp

Step1 First, open up your browser and search for Climpchamp.com. You must sign up and make an account on the next page first. Please note that creating an account doesn’t cost anything. Once you have an account, you just need to click “Create your first video”.

Step2 In this part, you just need to drag the video file you want to mute into the Clipchamp.

Step3 Once you import your video into Clipchamp. Then, go to “Audio” and simply drag the bar to the most left to remove the audio. When you are done, click “Export” on your top screen.

Step4 When exporting the video is done, click “Save to your computer” to save the video.

Part4: FAQ

Why do we need to mute audio from the video?

Getting rid of the audio from some clips might be necessary for a variety of reasons: perhaps the background noise is too loud, maybe you want to censor something from it, or maybe you simply don’t need it because you plan to use the video as B-roll or play music over it.

Conclusion

Basically, it’s easy to remove sound from video windows 10. You can use the tools mentioned above and follow the step-by-step instructions on how to do it. Out of all the tools listed above, Filmora is the best one to use. Filmora can not only take the sound out of your video but also has many ways to change the sound. Like ducking video or detaching audio

Free Download For macOS 10.14 or later

Step2 In this step, you need to find the video you want to mute on your computer and import it to Filmora. Then, drag your video onto Filmora’s timeline.

Step3 Once you’ve dragged your video onto Filmora’s timeline, click on your video in the timeline and then right-click. Afterwards, choose “detach audio.”

Step4 Now, you will see the audio track below the video track. Simply, click on the audio track and click the “delete” icon. Finally, you are successful in muting the audio from your video.

Step5 Click “Export” to save your video on your computer.

Beside Filmora allow you to mute audio from entire of the video, Filmora also has another audio modify feature called “Silence detection”. Silence Detection is a special add-on for Filmora users, making it easier to cut out silent parts of a video. Silence Detection is a unique Filmora add-on that makes it easier for users to remove silent pauses from a film. The add-on examines the full video to detect all the silent pauses and eliminates them instantly, saving you time and simplifying the editing process.

How to use silence detection?

Step1 Right-click on the clip in the resource, select the video clip on the timeline, and choose the silence detection option to open up the silence detection window.

Step2 The silent detection tool will automatically detect the silent and low sound points.

Furthermore, you can adjust the parameters to recalculate the silence detection or manually fine-tune what the feature has already detected

once everything sounds good, export the video into the Filmora timeline so you can continue editing your video.

Moreover, Filmora also has another feature called “Audio ducking”. Audio ducking is a way to turn down the volume of the background when one voiceover comes on.

How to use audio ducking with Filmora

Step1 Let’s say you already have your voiceover and the audio in your video. If you want you to use duking voice feature, firstly, you need to decide which part of the audio you want to lower. After that, double-click the selected part until the ducking voice feature comes out.

Step2 Next, you just need to drag the audio ducking bar to the left or right. Indeed, if you drag to the right, it will lower the audio. Once you are done adjusting the audio, click “Ok”, and you can preview the result.

Last but not least, Filmora has other features called TTS and STT. Speech to Text (STT) allows you to transcript voice to subtitles in one click. Using speech-to-text will save you a lot of time on subtitling and speed up the editing process. Meanwhile, Text to Speech (TTS) is a feature in Filmora that lets you turn text files into voiceover and add more elements to your video.

How to use STT with Filmora

Step1 Firstly, right-click on the audio track and choose “Speech-to-Text”.

Step2 In the STT parameter setting bar, you can choose the language of the audio to be transcribed and the files to be converted. You can also choose to match automatically to the timeline.

How to use TTS with Filmore

Step1 Go to the “Tittle” and add you default Title. After that, write anything you want.

Step2 Select the title box in the timeline, then right-click. After that, click on “Text-to-Speech”.

Step3 In the TTS parameter setting bar, choose the language this title is in and the voice’s name.

Method 3: Use Windows 10 officially recommend video editor

1. Climpchamp

Clipchamp is an online video editor that makes it easy for anyone to make videos, even if they have never edited before. It lets you combine your videos, images, and audio files, remove audio from the video and then save the finished video to your computer. On the Climpchamp homepage, you can sign up for a free account and start editing your videos right away.

How to mute audio from the video with Climpchamp

Step1 First, open up your browser and search for Climpchamp.com. You must sign up and make an account on the next page first. Please note that creating an account doesn’t cost anything. Once you have an account, you just need to click “Create your first video”.

Step2 In this part, you just need to drag the video file you want to mute into the Clipchamp.

Step3 Once you import your video into Clipchamp. Then, go to “Audio” and simply drag the bar to the most left to remove the audio. When you are done, click “Export” on your top screen.

Step4 When exporting the video is done, click “Save to your computer” to save the video.

Part4: FAQ

Why do we need to mute audio from the video?

Getting rid of the audio from some clips might be necessary for a variety of reasons: perhaps the background noise is too loud, maybe you want to censor something from it, or maybe you simply don’t need it because you plan to use the video as B-roll or play music over it.

Conclusion

Basically, it’s easy to remove sound from video windows 10. You can use the tools mentioned above and follow the step-by-step instructions on how to do it. Out of all the tools listed above, Filmora is the best one to use. Filmora can not only take the sound out of your video but also has many ways to change the sound. Like ducking video or detaching audio

Also read: