“Disable Incoming Audio Cues & Import Fresh Audiovisual Components via Windows Moviemaker Software”

How to Mute Audio in Windows Movie Maker?

Shanoon Cox

Mar 27, 2024• Proven solutions

Recording high-quality videos with Smartphones and consumer-level cameras is easy, but unfortunately the same can’t be said for the sound. The camera microphones often record low-quality audio and they pick up background noises that can make the video unwatchable.

In case you were looking for a quick way to mute or remove the audio in your videos, you came to the right place because in this article we are going to show you how you can mute audio in Windows Movie Maker or add new audio files to videos. We’re also going to provide you with an alternative solution that lets you have more control over the audio editing process.

• Part 1: How to Mute Audio in Windows Movie Maker?
• Part 2: Adding a New Audio Clip to a Video
• Part 3: A Better Way to Replace Original Audio on Windows

Part 1: How to Mute Audio in Windows Movie Maker?

Muting the audio in a video clip is simple, regardless of the video editing software you’re using. Windows Movie Maker lets you mute audio in just a few steps, so let’s see how you can mute videos with this video editor.

Step 1: In order to start editing a video, you must first import it into Windows Movie Maker. Click on the Add Videos and Photos icon in the software’s Home tab and proceed to select the clip you’d like to mute.

Click on the Open button in the Add Videos and Photos window and your clip will be imported into the software.

Step 2: After you added a clip to the storyboard you can preview it in order to decide which parts of the video you’d like to mute. Click on the Edit menu in the software’s ribbon, to gain access to the video editing tools Windows Movie Maker has to offer.

If you would like to mute only a portion of a video clip, you should position the playhead on the storyline at the exact location in the video where you want to make the cut and then click on the Split button.

Step 3: Make sure that the clip you want to mute is selected and click on the Video Volume icon on the left side of the Edit tab.

Drag the slider all the way to the left to mute the audio. Click the Play button in the preview window to make sure that video’s sound is muted.

Part 2: Adding a New Audio Clip to a Video

Windows Movie Maker also lets you replace the existing audio clip with a new one. Once again, this process is easy and it can be completed in a few steps.

Step 1: After you’ve muted the audio, click on the Add Music icon, that is located next to the Add Photos and Videos icon in the Home tab.

A drop-down menu will appear offering you to select music from an online source or to import an audio file from your computer. Moreover, you can select the starting point of the song you’re importing so you don’t have to adjust the position of the audio file in your project manually.

In order to do this, you just have to position the playhead at the desired location and select the Add music at the current point option from the drop-down menu. You can change the position of the audio file by dragging it to a new location in the storyboard. Using MP3 or WMA audio file is recommended since other audio file formats may not be compatible with Windows Movie maker.

Step 2: The audio file you imported will be automatically added to the video clip on the Storyboard. Click Play in the preview window to check if you like the result. Head over to the File menu and click on the Save Movie option. Windows Movie Maker will offer you a number of different options and if you’d like to save your video to the computer, you should select the For Computer option.

Part 3: Wondershare Filmora - A Better Way to Replace Audio Files in Videos on Windows OS

Windows Movie Maker has been discontinued a while ago, and its video and audio editing tools only enable you to perform basic video editing tasks. We suggest using Wondershare Filmora if you would like to mute or replace audio files in your videos because it offers more powerful audio and video editing features. Here’s how you can mute or replace audio files in Wondershare Filmora.

Step 1: Import the video clip into the software, by clicking on the Import button and then selecting the Import Media Files option. If you want to replace the audio of the clip you can also select the new audio file from your hard drive and click on the Open button. Filmora offers a rich royalty free music library, you can use if you already don’t have the music you want to add to your video.

Step 2: Drag and drop the video file to the timeline and then right-click on it. Select the Audio Detach option from the context menu. The audio file will appear in the newly created audio track, and you can just click on the Volume icon located at the begging of the audio track to mute that audio track.

For more details, check our guide about How to remove audio from video in Filmora on Windows.

If you want to add a new audio clip to your project and replace the old one, you should select the existing audio file and press the delete button on your keyboard. You can then drag and drop the new audio file to the timeline from the software’s Media Bin, or the Music tab, in case you decide to use songs featured in Filmora’s music library. You can cut, trim or adjust the start and end position of the audio file or use some of the audio effects the software offers. When done, click on the Export button and select the output format that is most suitable for the project you’re working on.

Conclusion

Videos that have poor sound quality won’t impress anyone, but you shouldn’t worry because muting or replacing audio files is a task that requires almost no effort. Windows Movie Maker can be used to quickly mute an audio file, but if you want to have access to more professional audio editing tools using Wondershare Filmora is a much better option. What’s your favorite method of replacing audio files in videos? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Recording high-quality videos with Smartphones and consumer-level cameras is easy, but unfortunately the same can’t be said for the sound. The camera microphones often record low-quality audio and they pick up background noises that can make the video unwatchable.

In case you were looking for a quick way to mute or remove the audio in your videos, you came to the right place because in this article we are going to show you how you can mute audio in Windows Movie Maker or add new audio files to videos. We’re also going to provide you with an alternative solution that lets you have more control over the audio editing process.

• Part 1: How to Mute Audio in Windows Movie Maker?
• Part 2: Adding a New Audio Clip to a Video
• Part 3: A Better Way to Replace Original Audio on Windows

Part 1: How to Mute Audio in Windows Movie Maker?

Muting the audio in a video clip is simple, regardless of the video editing software you’re using. Windows Movie Maker lets you mute audio in just a few steps, so let’s see how you can mute videos with this video editor.

Step 1: In order to start editing a video, you must first import it into Windows Movie Maker. Click on the Add Videos and Photos icon in the software’s Home tab and proceed to select the clip you’d like to mute.

Click on the Open button in the Add Videos and Photos window and your clip will be imported into the software.

Step 2: After you added a clip to the storyboard you can preview it in order to decide which parts of the video you’d like to mute. Click on the Edit menu in the software’s ribbon, to gain access to the video editing tools Windows Movie Maker has to offer.

If you would like to mute only a portion of a video clip, you should position the playhead on the storyline at the exact location in the video where you want to make the cut and then click on the Split button.

Step 3: Make sure that the clip you want to mute is selected and click on the Video Volume icon on the left side of the Edit tab.

Drag the slider all the way to the left to mute the audio. Click the Play button in the preview window to make sure that video’s sound is muted.

Part 2: Adding a New Audio Clip to a Video

Windows Movie Maker also lets you replace the existing audio clip with a new one. Once again, this process is easy and it can be completed in a few steps.

Step 1: After you’ve muted the audio, click on the Add Music icon, that is located next to the Add Photos and Videos icon in the Home tab.

A drop-down menu will appear offering you to select music from an online source or to import an audio file from your computer. Moreover, you can select the starting point of the song you’re importing so you don’t have to adjust the position of the audio file in your project manually.

In order to do this, you just have to position the playhead at the desired location and select the Add music at the current point option from the drop-down menu. You can change the position of the audio file by dragging it to a new location in the storyboard. Using MP3 or WMA audio file is recommended since other audio file formats may not be compatible with Windows Movie maker.

Step 2: The audio file you imported will be automatically added to the video clip on the Storyboard. Click Play in the preview window to check if you like the result. Head over to the File menu and click on the Save Movie option. Windows Movie Maker will offer you a number of different options and if you’d like to save your video to the computer, you should select the For Computer option.

Part 3: Wondershare Filmora - A Better Way to Replace Audio Files in Videos on Windows OS

Windows Movie Maker has been discontinued a while ago, and its video and audio editing tools only enable you to perform basic video editing tasks. We suggest using Wondershare Filmora if you would like to mute or replace audio files in your videos because it offers more powerful audio and video editing features. Here’s how you can mute or replace audio files in Wondershare Filmora.

Step 1: Import the video clip into the software, by clicking on the Import button and then selecting the Import Media Files option. If you want to replace the audio of the clip you can also select the new audio file from your hard drive and click on the Open button. Filmora offers a rich royalty free music library, you can use if you already don’t have the music you want to add to your video.

Step 2: Drag and drop the video file to the timeline and then right-click on it. Select the Audio Detach option from the context menu. The audio file will appear in the newly created audio track, and you can just click on the Volume icon located at the begging of the audio track to mute that audio track.

For more details, check our guide about How to remove audio from video in Filmora on Windows.

If you want to add a new audio clip to your project and replace the old one, you should select the existing audio file and press the delete button on your keyboard. You can then drag and drop the new audio file to the timeline from the software’s Media Bin, or the Music tab, in case you decide to use songs featured in Filmora’s music library. You can cut, trim or adjust the start and end position of the audio file or use some of the audio effects the software offers. When done, click on the Export button and select the output format that is most suitable for the project you’re working on.

Conclusion

Videos that have poor sound quality won’t impress anyone, but you shouldn’t worry because muting or replacing audio files is a task that requires almost no effort. Windows Movie Maker can be used to quickly mute an audio file, but if you want to have access to more professional audio editing tools using Wondershare Filmora is a much better option. What’s your favorite method of replacing audio files in videos? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Recording high-quality videos with Smartphones and consumer-level cameras is easy, but unfortunately the same can’t be said for the sound. The camera microphones often record low-quality audio and they pick up background noises that can make the video unwatchable.

In case you were looking for a quick way to mute or remove the audio in your videos, you came to the right place because in this article we are going to show you how you can mute audio in Windows Movie Maker or add new audio files to videos. We’re also going to provide you with an alternative solution that lets you have more control over the audio editing process.

• Part 1: How to Mute Audio in Windows Movie Maker?
• Part 2: Adding a New Audio Clip to a Video
• Part 3: A Better Way to Replace Original Audio on Windows

Part 1: How to Mute Audio in Windows Movie Maker?

Muting the audio in a video clip is simple, regardless of the video editing software you’re using. Windows Movie Maker lets you mute audio in just a few steps, so let’s see how you can mute videos with this video editor.

Step 1: In order to start editing a video, you must first import it into Windows Movie Maker. Click on the Add Videos and Photos icon in the software’s Home tab and proceed to select the clip you’d like to mute.

Click on the Open button in the Add Videos and Photos window and your clip will be imported into the software.

Step 2: After you added a clip to the storyboard you can preview it in order to decide which parts of the video you’d like to mute. Click on the Edit menu in the software’s ribbon, to gain access to the video editing tools Windows Movie Maker has to offer.

If you would like to mute only a portion of a video clip, you should position the playhead on the storyline at the exact location in the video where you want to make the cut and then click on the Split button.

Step 3: Make sure that the clip you want to mute is selected and click on the Video Volume icon on the left side of the Edit tab.

Drag the slider all the way to the left to mute the audio. Click the Play button in the preview window to make sure that video’s sound is muted.

Part 2: Adding a New Audio Clip to a Video

Windows Movie Maker also lets you replace the existing audio clip with a new one. Once again, this process is easy and it can be completed in a few steps.

Step 1: After you’ve muted the audio, click on the Add Music icon, that is located next to the Add Photos and Videos icon in the Home tab.

A drop-down menu will appear offering you to select music from an online source or to import an audio file from your computer. Moreover, you can select the starting point of the song you’re importing so you don’t have to adjust the position of the audio file in your project manually.

In order to do this, you just have to position the playhead at the desired location and select the Add music at the current point option from the drop-down menu. You can change the position of the audio file by dragging it to a new location in the storyboard. Using MP3 or WMA audio file is recommended since other audio file formats may not be compatible with Windows Movie maker.

Step 2: The audio file you imported will be automatically added to the video clip on the Storyboard. Click Play in the preview window to check if you like the result. Head over to the File menu and click on the Save Movie option. Windows Movie Maker will offer you a number of different options and if you’d like to save your video to the computer, you should select the For Computer option.

Part 3: Wondershare Filmora - A Better Way to Replace Audio Files in Videos on Windows OS

Windows Movie Maker has been discontinued a while ago, and its video and audio editing tools only enable you to perform basic video editing tasks. We suggest using Wondershare Filmora if you would like to mute or replace audio files in your videos because it offers more powerful audio and video editing features. Here’s how you can mute or replace audio files in Wondershare Filmora.

Step 1: Import the video clip into the software, by clicking on the Import button and then selecting the Import Media Files option. If you want to replace the audio of the clip you can also select the new audio file from your hard drive and click on the Open button. Filmora offers a rich royalty free music library, you can use if you already don’t have the music you want to add to your video.

Step 2: Drag and drop the video file to the timeline and then right-click on it. Select the Audio Detach option from the context menu. The audio file will appear in the newly created audio track, and you can just click on the Volume icon located at the begging of the audio track to mute that audio track.

For more details, check our guide about How to remove audio from video in Filmora on Windows.

If you want to add a new audio clip to your project and replace the old one, you should select the existing audio file and press the delete button on your keyboard. You can then drag and drop the new audio file to the timeline from the software’s Media Bin, or the Music tab, in case you decide to use songs featured in Filmora’s music library. You can cut, trim or adjust the start and end position of the audio file or use some of the audio effects the software offers. When done, click on the Export button and select the output format that is most suitable for the project you’re working on.

Conclusion

Videos that have poor sound quality won’t impress anyone, but you shouldn’t worry because muting or replacing audio files is a task that requires almost no effort. Windows Movie Maker can be used to quickly mute an audio file, but if you want to have access to more professional audio editing tools using Wondershare Filmora is a much better option. What’s your favorite method of replacing audio files in videos? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

Recording high-quality videos with Smartphones and consumer-level cameras is easy, but unfortunately the same can’t be said for the sound. The camera microphones often record low-quality audio and they pick up background noises that can make the video unwatchable.

In case you were looking for a quick way to mute or remove the audio in your videos, you came to the right place because in this article we are going to show you how you can mute audio in Windows Movie Maker or add new audio files to videos. We’re also going to provide you with an alternative solution that lets you have more control over the audio editing process.

• Part 1: How to Mute Audio in Windows Movie Maker?
• Part 2: Adding a New Audio Clip to a Video
• Part 3: A Better Way to Replace Original Audio on Windows

Part 1: How to Mute Audio in Windows Movie Maker?

Muting the audio in a video clip is simple, regardless of the video editing software you’re using. Windows Movie Maker lets you mute audio in just a few steps, so let’s see how you can mute videos with this video editor.

Step 1: In order to start editing a video, you must first import it into Windows Movie Maker. Click on the Add Videos and Photos icon in the software’s Home tab and proceed to select the clip you’d like to mute.

Click on the Open button in the Add Videos and Photos window and your clip will be imported into the software.

Step 2: After you added a clip to the storyboard you can preview it in order to decide which parts of the video you’d like to mute. Click on the Edit menu in the software’s ribbon, to gain access to the video editing tools Windows Movie Maker has to offer.

If you would like to mute only a portion of a video clip, you should position the playhead on the storyline at the exact location in the video where you want to make the cut and then click on the Split button.

Step 3: Make sure that the clip you want to mute is selected and click on the Video Volume icon on the left side of the Edit tab.

Drag the slider all the way to the left to mute the audio. Click the Play button in the preview window to make sure that video’s sound is muted.

Part 2: Adding a New Audio Clip to a Video

Windows Movie Maker also lets you replace the existing audio clip with a new one. Once again, this process is easy and it can be completed in a few steps.

Step 1: After you’ve muted the audio, click on the Add Music icon, that is located next to the Add Photos and Videos icon in the Home tab.

A drop-down menu will appear offering you to select music from an online source or to import an audio file from your computer. Moreover, you can select the starting point of the song you’re importing so you don’t have to adjust the position of the audio file in your project manually.

In order to do this, you just have to position the playhead at the desired location and select the Add music at the current point option from the drop-down menu. You can change the position of the audio file by dragging it to a new location in the storyboard. Using MP3 or WMA audio file is recommended since other audio file formats may not be compatible with Windows Movie maker.

Step 2: The audio file you imported will be automatically added to the video clip on the Storyboard. Click Play in the preview window to check if you like the result. Head over to the File menu and click on the Save Movie option. Windows Movie Maker will offer you a number of different options and if you’d like to save your video to the computer, you should select the For Computer option.

Part 3: Wondershare Filmora - A Better Way to Replace Audio Files in Videos on Windows OS

Windows Movie Maker has been discontinued a while ago, and its video and audio editing tools only enable you to perform basic video editing tasks. We suggest using Wondershare Filmora if you would like to mute or replace audio files in your videos because it offers more powerful audio and video editing features. Here’s how you can mute or replace audio files in Wondershare Filmora.

Step 1: Import the video clip into the software, by clicking on the Import button and then selecting the Import Media Files option. If you want to replace the audio of the clip you can also select the new audio file from your hard drive and click on the Open button. Filmora offers a rich royalty free music library, you can use if you already don’t have the music you want to add to your video.

Step 2: Drag and drop the video file to the timeline and then right-click on it. Select the Audio Detach option from the context menu. The audio file will appear in the newly created audio track, and you can just click on the Volume icon located at the begging of the audio track to mute that audio track.

For more details, check our guide about How to remove audio from video in Filmora on Windows.

If you want to add a new audio clip to your project and replace the old one, you should select the existing audio file and press the delete button on your keyboard. You can then drag and drop the new audio file to the timeline from the software’s Media Bin, or the Music tab, in case you decide to use songs featured in Filmora’s music library. You can cut, trim or adjust the start and end position of the audio file or use some of the audio effects the software offers. When done, click on the Export button and select the output format that is most suitable for the project you’re working on.

Conclusion

Videos that have poor sound quality won’t impress anyone, but you shouldn’t worry because muting or replacing audio files is a task that requires almost no effort. Windows Movie Maker can be used to quickly mute an audio file, but if you want to have access to more professional audio editing tools using Wondershare Filmora is a much better option. What’s your favorite method of replacing audio files in videos? Leave a comment and let us know.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Reclaiming Fidelity: Navigating the Maze of Deformed Audio Repair Techniques

Create High-Quality Video - Wondershare Filmora

An easy and powerful YouTube video editor

Numerous video and audio effects to choose from

Detailed tutorials are provided by the official channel

Try It Free Try It Free

So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.

In this article

01 What Causes Distorted Audio?

02 How To Fix Distorted Audio Using Different Methods

What Causes Distorted Audio?

Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.

1. Recording Environment

Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.

When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.

2. Touching the Mic While Recording

If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.

3. Using the Wrong Mic

A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.

Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.

4. Positioning Your Microphones Incorrectly

You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.

5. Faulty Equipment

Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.

How To Fix Distorted Audio Using Different Methods

You can fix distorted audio using various methods. They include:

Method 1: How To Fix Distorted Audio in Audacity

Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.

1. Open the audio file by dragging and dropping it into Audacity.
2. Select the distorted part and click on the Effect option. Then, select Noise Reduction.

1. The Noise Reduction window will open.

1. Now, click on Noise Profile, and Audacity will know what to filter out.
2. Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
3. Hit preview to check the audio, then the Click OK button.

If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.

Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.

1. To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”

1. Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
2. Once you have set the values, hit the Preview button to check the audio. Then, click on OK.

That is how to fix distorted audio using Audacity.

You May Be Interested In

• 7 Best Audacity Alternatives for Android
• How to use Audacity for Podcasts

How To Fix Distorted Audio in Garageband

Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:

1. Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
2. Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
3. Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
4. Click the Edit tab to activate it, and a list of effects will pop up.
5. Select Distortion from the list, and you’ll see a drop-down menu.
6. Next, select the None option to remove distortion.

If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.

Method 3: How To Fix Distorted Audio in Windows 10

Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:

• When upgrading your computer from an older version to a new one
• In case your computer gets corrupted with a virus
• If your computer or device doesn’t the right sound drivers

So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.

1. Reinstall drivers

1. Right-click the start button and choose device manager.
2. Navigate through sound, video, and game controllers.
3. Click on the Details tab.
4. Select hardware Ids from the drop-down menu.

1. Copy and first the first value of drivers in your browser and search the internet.

1. Open the official site and download the correct driver。
2. Install and restart your PC。

2. Update drivers

1. Right-click on the start button.
2. Scroll to the sound, video, and game controllers option.
3. Right-click on the sound device and select uninstall the device.

1. Restart your PC after the uninstall process is finished.
2. Open the device manager.
3. Select and click on the scan for hardware changes option.

Windows will automatically install a new version of sound drivers

3. Run Windows Audio Troubleshooter

1. To use this method, open Start and click the cog-like icon. This will open the Settings app.
2. Select Update & security.
3. Choose Troubleshoot in the left pane.
4. Expand the Playing Audio by clicking it.
5. Hit the Run the troubleshooter button, then follow the further instructions.

4. Take Exclusive Control of Your Device Option by Disabling Allow Applications

1. Navigate to the notification area and right-click on the sound icon. Open Playback devices.
2. Next, right-click on the default Playback Device, then open Properties.
3. Choose the Advanced tab option.
4. Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.

When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.

Try It Free Try It Free

So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.

In this article

01 What Causes Distorted Audio?

02 How To Fix Distorted Audio Using Different Methods

What Causes Distorted Audio?

Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.

1. Recording Environment

Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.

When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.

2. Touching the Mic While Recording

If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.

3. Using the Wrong Mic

A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.

Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.

4. Positioning Your Microphones Incorrectly

You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.

5. Faulty Equipment

Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.

How To Fix Distorted Audio Using Different Methods

You can fix distorted audio using various methods. They include:

Method 1: How To Fix Distorted Audio in Audacity

Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.

1. Open the audio file by dragging and dropping it into Audacity.
2. Select the distorted part and click on the Effect option. Then, select Noise Reduction.

1. The Noise Reduction window will open.

1. Now, click on Noise Profile, and Audacity will know what to filter out.
2. Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
3. Hit preview to check the audio, then the Click OK button.

If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.

Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.

1. To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”

1. Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
2. Once you have set the values, hit the Preview button to check the audio. Then, click on OK.

That is how to fix distorted audio using Audacity.

You May Be Interested In

• 7 Best Audacity Alternatives for Android
• How to use Audacity for Podcasts

How To Fix Distorted Audio in Garageband

Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:

1. Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
2. Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
3. Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
4. Click the Edit tab to activate it, and a list of effects will pop up.
5. Select Distortion from the list, and you’ll see a drop-down menu.
6. Next, select the None option to remove distortion.

If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.

Method 3: How To Fix Distorted Audio in Windows 10

Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:

• When upgrading your computer from an older version to a new one
• In case your computer gets corrupted with a virus
• If your computer or device doesn’t the right sound drivers

So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.

1. Reinstall drivers

1. Right-click the start button and choose device manager.
2. Navigate through sound, video, and game controllers.
3. Click on the Details tab.
4. Select hardware Ids from the drop-down menu.

1. Copy and first the first value of drivers in your browser and search the internet.

1. Open the official site and download the correct driver。
2. Install and restart your PC。

2. Update drivers

1. Right-click on the start button.
2. Scroll to the sound, video, and game controllers option.
3. Right-click on the sound device and select uninstall the device.

1. Restart your PC after the uninstall process is finished.
2. Open the device manager.
3. Select and click on the scan for hardware changes option.

Windows will automatically install a new version of sound drivers

3. Run Windows Audio Troubleshooter

1. To use this method, open Start and click the cog-like icon. This will open the Settings app.
2. Select Update & security.
3. Choose Troubleshoot in the left pane.
4. Expand the Playing Audio by clicking it.
5. Hit the Run the troubleshooter button, then follow the further instructions.

4. Take Exclusive Control of Your Device Option by Disabling Allow Applications

1. Navigate to the notification area and right-click on the sound icon. Open Playback devices.
2. Next, right-click on the default Playback Device, then open Properties.
3. Choose the Advanced tab option.
4. Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.

When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.

Try It Free Try It Free

So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.

In this article

01 What Causes Distorted Audio?

02 How To Fix Distorted Audio Using Different Methods

What Causes Distorted Audio?

Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.

1. Recording Environment

Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.

When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.

2. Touching the Mic While Recording

If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.

3. Using the Wrong Mic

A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.

Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.

4. Positioning Your Microphones Incorrectly

You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.

5. Faulty Equipment

Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.

How To Fix Distorted Audio Using Different Methods

You can fix distorted audio using various methods. They include:

Method 1: How To Fix Distorted Audio in Audacity

Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.

1. Open the audio file by dragging and dropping it into Audacity.
2. Select the distorted part and click on the Effect option. Then, select Noise Reduction.

1. The Noise Reduction window will open.

1. Now, click on Noise Profile, and Audacity will know what to filter out.
2. Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
3. Hit preview to check the audio, then the Click OK button.

If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.

Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.

1. To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”

1. Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
2. Once you have set the values, hit the Preview button to check the audio. Then, click on OK.

That is how to fix distorted audio using Audacity.

You May Be Interested In

• 7 Best Audacity Alternatives for Android
• How to use Audacity for Podcasts

How To Fix Distorted Audio in Garageband

Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:

1. Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
2. Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
3. Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
4. Click the Edit tab to activate it, and a list of effects will pop up.
5. Select Distortion from the list, and you’ll see a drop-down menu.
6. Next, select the None option to remove distortion.

If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.

Method 3: How To Fix Distorted Audio in Windows 10

Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:

• When upgrading your computer from an older version to a new one
• In case your computer gets corrupted with a virus
• If your computer or device doesn’t the right sound drivers

So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.

1. Reinstall drivers

1. Right-click the start button and choose device manager.
2. Navigate through sound, video, and game controllers.
3. Click on the Details tab.
4. Select hardware Ids from the drop-down menu.

1. Copy and first the first value of drivers in your browser and search the internet.

1. Open the official site and download the correct driver。
2. Install and restart your PC。

2. Update drivers

1. Right-click on the start button.
2. Scroll to the sound, video, and game controllers option.
3. Right-click on the sound device and select uninstall the device.

1. Restart your PC after the uninstall process is finished.
2. Open the device manager.
3. Select and click on the scan for hardware changes option.

Windows will automatically install a new version of sound drivers

3. Run Windows Audio Troubleshooter

1. To use this method, open Start and click the cog-like icon. This will open the Settings app.
2. Select Update & security.
3. Choose Troubleshoot in the left pane.
4. Expand the Playing Audio by clicking it.
5. Hit the Run the troubleshooter button, then follow the further instructions.

4. Take Exclusive Control of Your Device Option by Disabling Allow Applications

1. Navigate to the notification area and right-click on the sound icon. Open Playback devices.
2. Next, right-click on the default Playback Device, then open Properties.
3. Choose the Advanced tab option.
4. Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.

When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.

Try It Free Try It Free

So you’re all set: you’ve sat down, grabbed your microphone, fired up your recording software, and started pouring out the content of your mind. Once finished, you listen back to the recording, thinking you’re about to hear the silky-smooth undertones of your voice resonating through your ears, but something odd occurs — it sounds terrible. Distorted audio is very unwelcoming since you want the sound to be natural. This guide will explain how to fix distorted audio using various methods.

In this article

01 What Causes Distorted Audio?

02 How To Fix Distorted Audio Using Different Methods

What Causes Distorted Audio?

Distorted audio is the main culprit in ruined audio clips. Here are some of the causes of distorted sound.

1. Recording Environment

Not recording dialogue and voice-over in a studio can cause distorted audio. However, audio quality can be out of control if you conduct an onsite interview. Getting a meaningful and cinematic shot should come first. If you do not use a studio-quality microphone that comes with directional controls, you’ll likely have distorted audio. You might want to go for a unidirectional stereo channel if you want boom movements to be undetectable.

When a cheap, low-quality microphone is moving, you’ll hear the unsteadiness in your recording, leading to distorted audio. Recording audio in an echo chamber or an overly large room can also result in distorted audio.

2. Touching the Mic While Recording

If you hand the microphone to someone who does not know how to use it, they might hold it too loosely or close. Microphones feature sensitive parts that should not be dropped, shaken, or breathed on. When you are interviewing people unfamiliar with industry standards, you should hold the microphone, not the person you are interviewing. The mic is not within the range of 6” to 12 “ away from the speaker, this could lead to distorted audio.

3. Using the Wrong Mic

A reliable mic comes with audio controls and captures room tone and timbre. It should be portable, compact, and have a wind sleeve. In outdoor situations where ADR is not an option, you might want to use a wind sleeve.

Podcast showrunners and content creators often use Blue Yeti mics connected to a soundboard. While these are cheaper options, they can cause distorted audio. Content creators who are not stationary should purchase a lavalier, and wireless is a more high-end and expensive option.

4. Positioning Your Microphones Incorrectly

You have to be careful if you’ll be mounting a mic on your DSLR. Filming events with a one-mic setup is a promise to record everything you hear again. You’ll inevitably film some moments at a distance and leave the audio compromised to distortion.

5. Faulty Equipment

Your equipment can fail in different ways. For instance, your effects processor can fail, meaning that you won’t hear any sound passing through it. It can also fail, and you end up hearing a distorted sound passing out of the processor. Essentially, this might or might not be linked to the component’s capability of handling the signal as much as the busted internals result.

How To Fix Distorted Audio Using Different Methods

You can fix distorted audio using various methods. They include:

Method 1: How To Fix Distorted Audio in Audacity

Audacity is the bread and butter for individuals who adore a crisp audio quality. Audacity helps users finetune various attributes of their recordings. It is a free and intuitive software suite suitable for newbies and individuals who don’t interact with computers. With that in mind, here is how to fix distorted audio using Audacity.

1. Open the audio file by dragging and dropping it into Audacity.
2. Select the distorted part and click on the Effect option. Then, select Noise Reduction.

1. The Noise Reduction window will open.

1. Now, click on Noise Profile, and Audacity will know what to filter out.
2. Next, select the entire audio and open the Noise Reduction Window again ( Effect > Noise Reduction ). Then, set the values to suit your preferences.
3. Hit preview to check the audio, then the Click OK button.

If the audio is still distorted, apply the filter again. Don’t overdo the process numerous times to ensure your audio is not degraded, making the voice sound robotic and tinny.

Now, use compression to your advantage. If compression confuses you, think of it as a tool that adjusts your audio for the listener’s benefit. Compression not only quiets the background minutiae that creeps into your recording, but it also boosts your voice and gives it a full, captivating resonance.

1. To start the compression process, select your audio track, press CTRL + A, click “Effect” and then click “Compressor.”

1. Adjust the values in the compressor to meet your needs and make your voice “pop” from the background.
2. Once you have set the values, hit the Preview button to check the audio. Then, click on OK.

That is how to fix distorted audio using Audacity.

You May Be Interested In

• 7 Best Audacity Alternatives for Android
• How to use Audacity for Podcasts

How To Fix Distorted Audio in Garageband

Garageband is one of the most popular audio recording software available. Though you can use it for various purposes, it is mainly intended to be used to create music. However, many people have the problem of distorted audio files, making production difficult when trying to perfect a project. To learn how to fix distorted audio in Garageband, follow the steps below:

1. Launch GarageBand, then open your audio file. Once your audio file finishes loading, select the audio file from which you want to remove distortion by clicking it.
2. Click on the “i” symbol encapsulated in a blue circle positioned on the lower-right portion of your screen. This icon sits in the middle of two other icons: a set of notes and an eye.
3. Select the “Real Instrument” tab located on the top right side of your screen. You’ll see two tabs: Master Tracks and Real Instrument.
4. Click the Edit tab to activate it, and a list of effects will pop up.
5. Select Distortion from the list, and you’ll see a drop-down menu.
6. Next, select the None option to remove distortion.

If you have distorted audio due to poor recording quality, navigate to the Real Instrument”Edit menu and select AULowpass from the boxes available. Doing this will remove frequencies above a certain range, and this will fix the distorted audio.

Method 3: How To Fix Distorted Audio in Windows 10

Several actions can cause problems or distort sound on your Windows 10 application. Some of the common causes include:

• When upgrading your computer from an older version to a new one
• In case your computer gets corrupted with a virus
• If your computer or device doesn’t the right sound drivers

So how do you fix distorted audio in Windows 10? There are several ways you can fix distorted audio in Windows 10. Here is how to fix distorted audio using some of the best ways.

1. Reinstall drivers

1. Right-click the start button and choose device manager.
2. Navigate through sound, video, and game controllers.
3. Click on the Details tab.
4. Select hardware Ids from the drop-down menu.

1. Copy and first the first value of drivers in your browser and search the internet.

1. Open the official site and download the correct driver。
2. Install and restart your PC。

2. Update drivers

1. Right-click on the start button.
2. Scroll to the sound, video, and game controllers option.
3. Right-click on the sound device and select uninstall the device.

1. Restart your PC after the uninstall process is finished.
2. Open the device manager.
3. Select and click on the scan for hardware changes option.

Windows will automatically install a new version of sound drivers

3. Run Windows Audio Troubleshooter

1. To use this method, open Start and click the cog-like icon. This will open the Settings app.
2. Select Update & security.
3. Choose Troubleshoot in the left pane.
4. Expand the Playing Audio by clicking it.
5. Hit the Run the troubleshooter button, then follow the further instructions.

4. Take Exclusive Control of Your Device Option by Disabling Allow Applications

1. Navigate to the notification area and right-click on the sound icon. Open Playback devices.
2. Next, right-click on the default Playback Device, then open Properties.
3. Choose the Advanced tab option.
4. Navigate to the Exclusive mode section and check the box that says disable Allow applications to control your device.

When it comes to editing or performing audio editing in the video, Wondershare Filmora is a powerful video editing software that can help you with reducing the voiceover volume, mute the audio in the video, or cut, copy, paste or insert your audio files. Learn more about the audio editing features of Filmora from the below video & download Filmora to try!

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Conclusion

● Whether you’re an amateur audio enthusiast or produce a podcast with thousands of listeners, the quality of your audio can “make or break” your results. When your audience is listening to an audio recording, the last thing they want to notice or hear is a distortion because it is very distracting. When recording, it is almost impossible to find an environment that removes audio distortion without access to a recording studio. Luckily, you can use the above methods to fix distorted audio and make it look professional.

Understanding Pexels.com: A Resource for High-Quality, Creative Commons Images

There is a great way to make your messages more impactful that is free to use. Pexels is an online creative assets library that features high-resolution photos, including Pexels 4k, and an assortment of audio clips you can use in your creations.

The following are things you need to know about Pexels.com. It includes details on what Pexels is, important user information, and other hidden features of the website. Keep reading to find out more.

Part1: Is Pexels.com free to use?

Yes, Pexels.com is a free online library of stock photos that you can use for personal or commercial purposes with your creations. In addition, photographers submit their images to the platform to allow others to reuse them.

Pexels’ free download policy allows you to obtain images under the Pexels or Creative common licensing rules. In addition, both licenses allow you to use Pexels images and videos for personal and commercial purposes, provided you make alterations to the original.

According to the site’s founders, the following are the reasons why the site is free:

• Its main source of revenue is selling advertisement slots to other paid-content databases.
• You can also donate to the website’s operational costs with a single click. In addition, there is no limitation on how much and how often you can donate.
• Most of the site’s contributors do so willingly to increase their brand exposure. For example, a verified user states that uploading his content to Pexels 4k and Pexels audio has resulted in an influx of high-paying customers.

So, what is the difference between paid and stock photo sites? Paid content databases such as Shutterstock and Deposit photos require you to create a user ID and subscribe to their service. Conversely, stock photo sites like Pexels.com feature free stock images and videos that you can use with minimal restrictions.

For example, the site allows you to use its content on YouTube for personal or commercial reasons, provided you make adjustments to the original asset, and you own the video. In addition, the site’s library features content that its contributors share willingly. As such, you can download content from these sites without creating an account or acknowledging the image owner.

Currently, you can access Pexels through your web browser or download the app on your Android or iOS device. In addition, you can also access the asset library through the Canva application following their merger. Furthermore, you can also download it as a plugin for different content creation software, including Photoshop, MS Office, and Google Slides.

Part2: What can Pexels provide you?

Now that you are aware of Pexels.com’s origin story and access methods, here is a rundown of what free access provides you.

1. 4K images for almost all topics

Pexels.com features a dedicated library of over 40,000 4k images from their contributors. You can access the library by typing 4k in the site’s search engine. In addition, the library is full of 4k images across various topics, including niche subjects such as Nebula and Abstract. Furthermore, the site’s search engine uses search tags to provide more accurate results. For example, by typing 4K Dark in the search engine, the site can narrow down your search to provide more relevant results.

2. Audio

You also get access to Pexels audio, a collection of over 8000 audio clips from the site’s numerous contributors. In addition, all of the Pexels audio’s content is completely free to use for all users. Currently, you can only access the database through your web browser and the iOS app.

3. Video

Another content category that your free access provides you is Pexels video. The database features a collection of over 2000 video clips you can use for your commercial or personal works. In addition, Pexels.com offers various editing tools to make alterations immediately. Furthermore, you also have templates for different content configurations, including social media and YouTube posts.

Part3: What’s Leaderboard and Challenges on Pexels.com?

The Pexels free download leaderboard is a list of the site’s top contributors within the past thirty days. The ranking is based on the number of views of photos and videos you submit within thirty days. For example, you earn the top spot if you receive the most views to your content, provided it is less than thirty days old. As such, each contributor has an equal chance of rising to the top, provided they put in the effort.

On the other hand, Pexels challenges are monthly competitions where contributors submit their best work to win different prizes. Typically, each challenge varies in the category, prizes, and content specifications. For example, the most recent challenge required contributors to upload images projecting friendship.

In addition, there is no limitation to the number of eligible uploads because challenge officials consider all of them. Finally, all images you submit for the Pexels challenge fall under the Pexels license, meaning they are free to use by the site’s visitors.

Part4: What are not allowed on Pexels?

Currently, all of the Pexels creative assets are under the Pexels license, a variation to the creative commons zero license other stock photo sites offer. Although you can access and download the site’s assets for free, there are some restrictions on your usage of them. Here is what Pexels.com’s free download license does not allow you to do with its assets.

1. It can’t be used in a political context

You cannot use Pexels free download videos, images, and audio clips in a political context. This is because some of the assets include identifiable people, and using their image may be seen as their endorsement of your political beliefs. In addition, the situation becomes worse if your ideology contains offensive material and messaging.

Furthermore, the Pexels license also bans using their creative assets to promote your personal brand, especially when they contain any identifiable imagery. By doing so, Pexels.com remains a free resource for people of all creeds, regardless of their political affiliations.

2. Resell the resources

Another thing you cannot do when using Pexels.com is to resell their photos and videos to other stock photograph platforms. Most users attribute this to the site’s owners wanting to maintain a fresher database than its competitors.

In addition, you can also consider the restriction as a way to prevent duplication of results on web searches and prevent the overuse of creative assets. As such, you cannot use their creative assets on items such as print media and physical goods, including T-shirts and mugs.

Part5: FAQs

Why should you create a Pexels account?

Pexels.com seeks to create a simple and fast medium for you to discover free photos and videos. It does so by providing a common platform where contributors can share their work with a greater audience. Here are some of the benefits of creating a Pexels.com account:

• You can create collections for different projects, accessible on different dashboards.
• Continuous free access to every creative asset you have ever downloaded. For example, you can access all images you have downloaded from Pexels 4K.
• You also get a custom homepage that features your latest work and database favorites.
• In addition, you will have access to the site’s community, which has helpful information for all users.

What are the rules for uploading videos on Pexels.com?

Here are the requirements for uploading videos on Pexels.com:

• Your videos must be of resolution 1920 X 1080 and higher.
• All videos should be free of explicit content such as nudity or violence.
• Your videos should not feature any watermarks, branding, or borders.
• The recording and scene transitions should be seamless.
• The site does not permit the uploading of animations.

What are the image uploading requirements on Pexels.com?

Pexels free download accepts images in JPEG format only. In addition, your images must also meet the following conditions.

• All photos need to be at least 4 megapixels and have a minimum resolution of 2592 X 1520 pixels.
• Your images should not contain any explicit material. All photos with graphic nudity and violence are banned from the website.
• Your photos should be well-oriented and should not include watermarks, text elements, or borders when uploading them to your pexelx.com account.

Does Pexels.com accept uploading of mobile photos?

Yes. Using the app, you can upload images from your smartphone’s internal storage directly to Pexels.com. In addition, other requirements must be met before your photo is approved. You can find out more from the upload guidelines on pexel.com.

What alterations can you make to use Pexels photos on your merchandise?

Pexels allows you to use its images for personal and commercial reasons if you alter them and make them your own. Some of the alterations the site recommends include:

• Adding graphic elements to the images using Pexels.com’s editing tool.
• Using part of the Pexels image in a greater project such as a collage or wallpaper.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Free Download For macOS 10.14 or later

Also read: