The Art of Pitch Correction in Audacity: Enhancing Sound Worthily

You may raise or lower the pitch of a pre-recorded song. Likewise, you may apply the pitch-changing effect in real-time sound recording. Change in pitch affects your noise in certain ways. For instance, it can help you sound younger. Similarly, it can convert the male voice into a female voice. Another notable use of the pitch-changing technique is that you can produce sounds like cartoons. So, changing pitch can add a unique touch to your voice. You can also change pitch when recording in Audacity. The following article covers details about the Audacity change pitch feature. Let’s get started.

In this article

01 What is pitch, and how does it work?

02 How to Change Pitch in Audacity?

Part 1: What is pitch, and how does it work?

Not all sounds are the same. Some vary in terms of amplitude, which makes them loud or quiet. In contrast, others vary in terms of pitch, which makes them high or low. Pitch is used to differentiate between the acute and flat notes in a sound wave. High-pitched sounds are likely to be shrilling, whereas the lower-pitched will be bassy. Pitch depends upon the frequency of the sound waves producing them. In short, notes at a higher frequency are high-pitched.

On the contrary, notes at lower frequencies are low-pitched. Changing a pitch of noise from low to high or vice versa is an art. Thus, sound recording and editing applications like Audacity come with the in-built effect that enables you to change the pitch of a sound.

Part 2: How to Change Pitch in Audacity?

Sound editing is becoming increasingly popular in music and other relevant industries. Several applications offer sound editing tools to serve the needs of the people. Pitch-changing is one of the common tools that people look for in sound editors.

Audacity is one of the notable software that allows users to change the pitch of the voice. It comes with an Audacity pitch shift mechanism to facilitate users. So, if you are editing sound in Audacity, changing the pitch is just a matter of a few clicks. Are you still wondering how you can apply the Audacity change pitch technique when editing? Here’s how you can do it in simple steps.

Step 1: Select the audio portion

Launch Audacity and add sound recordings you want to edit. Click on the timeline and drag to select the portion of the sound.

Note: Only the portion whose pitch you want to change.

Step 2: Open Effect menu

Click on the Effect tab at the top right of the screen next to Generate. Select Pitch Change from the drop-down menu.

Note: You can also make other changes, such as Change Speed and Change Tempo option will let you alter the speed of the sound. So, the pitch can also be altered using this process.

Step 3: Adjust pitch

Drag the slider to alter the pitch of the sound and press the OK button to apply changes.

Note: To increase pitch, slide towards the right. Similarly, slide towards the left to a lower pitch. In addition, the pitch can also be changed by configuring From and To parameters.

Bonus Section: How to Adjust Sound Louder in Audacity?

Volume in an audio file may or may not be ideal for use. Sometimes, the sound is too loud or low. Audacity can help you in such a situation. So, if you are editing sound recordings in Audacity, you can also fix the volume of the sound. The good thing to note is that you can adjust the sound in both directions, which implies you can easily amplify or reduce the volume in these open-source applications. Are you interested in knowing about the volume adjustment process in Audacity? If yes, we have summarized the process in simple steps. Let’s take a look.

Step 1: Add an audio file

Launch the software and click on File. Select Open and select the desired audio.

Note: It is not recommended to change the volume through the playback volume knob at the top right corner of the screen, as this will only increase the volume in your device. However, the actual volume of the audio will remain unchanged.

Step 2: Increase/Decrease audio gain

Change the gain of the audio at the left-hand side of the screen. Move the slider to adjust the volume to the desired level.

Note: Alternatively, you may also increase or increase the volume through the amplification process. To use this method, select the audio portion, access Effect, and tap Amplify. Tick allow clipping box and move the slider to set the volume of the sound.

Conclusion

There are high chances of audio sound not being in the required pitch or volume. Plus, you may also need to change the sound characteristics of an audio file for specific use. So, if this is the case, the Audacity change pitch technique is all you need to learn. Thus, we have summarized the process of changing pitch and volume in a step-by-step guide in this article. Hopefully, all your concerns will have been addressed.

02 How to Change Pitch in Audacity?

Part 1: What is pitch, and how does it work?

Not all sounds are the same. Some vary in terms of amplitude, which makes them loud or quiet. In contrast, others vary in terms of pitch, which makes them high or low. Pitch is used to differentiate between the acute and flat notes in a sound wave. High-pitched sounds are likely to be shrilling, whereas the lower-pitched will be bassy. Pitch depends upon the frequency of the sound waves producing them. In short, notes at a higher frequency are high-pitched.

On the contrary, notes at lower frequencies are low-pitched. Changing a pitch of noise from low to high or vice versa is an art. Thus, sound recording and editing applications like Audacity come with the in-built effect that enables you to change the pitch of a sound.

Part 2: How to Change Pitch in Audacity?

Sound editing is becoming increasingly popular in music and other relevant industries. Several applications offer sound editing tools to serve the needs of the people. Pitch-changing is one of the common tools that people look for in sound editors.

Audacity is one of the notable software that allows users to change the pitch of the voice. It comes with an Audacity pitch shift mechanism to facilitate users. So, if you are editing sound in Audacity, changing the pitch is just a matter of a few clicks. Are you still wondering how you can apply the Audacity change pitch technique when editing? Here’s how you can do it in simple steps.

Step 1: Select the audio portion

Launch Audacity and add sound recordings you want to edit. Click on the timeline and drag to select the portion of the sound.

Note: Only the portion whose pitch you want to change.

Step 2: Open Effect menu

Click on the Effect tab at the top right of the screen next to Generate. Select Pitch Change from the drop-down menu.

Note: You can also make other changes, such as Change Speed and Change Tempo option will let you alter the speed of the sound. So, the pitch can also be altered using this process.

Step 3: Adjust pitch

Drag the slider to alter the pitch of the sound and press the OK button to apply changes.

Note: To increase pitch, slide towards the right. Similarly, slide towards the left to a lower pitch. In addition, the pitch can also be changed by configuring From and To parameters.

Bonus Section: How to Adjust Sound Louder in Audacity?

Volume in an audio file may or may not be ideal for use. Sometimes, the sound is too loud or low. Audacity can help you in such a situation. So, if you are editing sound recordings in Audacity, you can also fix the volume of the sound. The good thing to note is that you can adjust the sound in both directions, which implies you can easily amplify or reduce the volume in these open-source applications. Are you interested in knowing about the volume adjustment process in Audacity? If yes, we have summarized the process in simple steps. Let’s take a look.

Step 1: Add an audio file

Launch the software and click on File. Select Open and select the desired audio.

Note: It is not recommended to change the volume through the playback volume knob at the top right corner of the screen, as this will only increase the volume in your device. However, the actual volume of the audio will remain unchanged.

Step 2: Increase/Decrease audio gain

Change the gain of the audio at the left-hand side of the screen. Move the slider to adjust the volume to the desired level.

Note: Alternatively, you may also increase or increase the volume through the amplification process. To use this method, select the audio portion, access Effect, and tap Amplify. Tick allow clipping box and move the slider to set the volume of the sound.

Conclusion

There are high chances of audio sound not being in the required pitch or volume. Plus, you may also need to change the sound characteristics of an audio file for specific use. So, if this is the case, the Audacity change pitch technique is all you need to learn. Thus, we have summarized the process of changing pitch and volume in a step-by-step guide in this article. Hopefully, all your concerns will have been addressed.

02 How to Change Pitch in Audacity?

Part 1: What is pitch, and how does it work?

Not all sounds are the same. Some vary in terms of amplitude, which makes them loud or quiet. In contrast, others vary in terms of pitch, which makes them high or low. Pitch is used to differentiate between the acute and flat notes in a sound wave. High-pitched sounds are likely to be shrilling, whereas the lower-pitched will be bassy. Pitch depends upon the frequency of the sound waves producing them. In short, notes at a higher frequency are high-pitched.

On the contrary, notes at lower frequencies are low-pitched. Changing a pitch of noise from low to high or vice versa is an art. Thus, sound recording and editing applications like Audacity come with the in-built effect that enables you to change the pitch of a sound.

Part 2: How to Change Pitch in Audacity?

Sound editing is becoming increasingly popular in music and other relevant industries. Several applications offer sound editing tools to serve the needs of the people. Pitch-changing is one of the common tools that people look for in sound editors.

Audacity is one of the notable software that allows users to change the pitch of the voice. It comes with an Audacity pitch shift mechanism to facilitate users. So, if you are editing sound in Audacity, changing the pitch is just a matter of a few clicks. Are you still wondering how you can apply the Audacity change pitch technique when editing? Here’s how you can do it in simple steps.

Step 1: Select the audio portion

Launch Audacity and add sound recordings you want to edit. Click on the timeline and drag to select the portion of the sound.

Note: Only the portion whose pitch you want to change.

Step 2: Open Effect menu

Click on the Effect tab at the top right of the screen next to Generate. Select Pitch Change from the drop-down menu.

Note: You can also make other changes, such as Change Speed and Change Tempo option will let you alter the speed of the sound. So, the pitch can also be altered using this process.

Step 3: Adjust pitch

Drag the slider to alter the pitch of the sound and press the OK button to apply changes.

Note: To increase pitch, slide towards the right. Similarly, slide towards the left to a lower pitch. In addition, the pitch can also be changed by configuring From and To parameters.

Bonus Section: How to Adjust Sound Louder in Audacity?

Volume in an audio file may or may not be ideal for use. Sometimes, the sound is too loud or low. Audacity can help you in such a situation. So, if you are editing sound recordings in Audacity, you can also fix the volume of the sound. The good thing to note is that you can adjust the sound in both directions, which implies you can easily amplify or reduce the volume in these open-source applications. Are you interested in knowing about the volume adjustment process in Audacity? If yes, we have summarized the process in simple steps. Let’s take a look.

Step 1: Add an audio file

Launch the software and click on File. Select Open and select the desired audio.

Note: It is not recommended to change the volume through the playback volume knob at the top right corner of the screen, as this will only increase the volume in your device. However, the actual volume of the audio will remain unchanged.

Step 2: Increase/Decrease audio gain

Change the gain of the audio at the left-hand side of the screen. Move the slider to adjust the volume to the desired level.

Note: Alternatively, you may also increase or increase the volume through the amplification process. To use this method, select the audio portion, access Effect, and tap Amplify. Tick allow clipping box and move the slider to set the volume of the sound.

Conclusion

There are high chances of audio sound not being in the required pitch or volume. Plus, you may also need to change the sound characteristics of an audio file for specific use. So, if this is the case, the Audacity change pitch technique is all you need to learn. Thus, we have summarized the process of changing pitch and volume in a step-by-step guide in this article. Hopefully, all your concerns will have been addressed.

02 How to Change Pitch in Audacity?

Part 1: What is pitch, and how does it work?

Not all sounds are the same. Some vary in terms of amplitude, which makes them loud or quiet. In contrast, others vary in terms of pitch, which makes them high or low. Pitch is used to differentiate between the acute and flat notes in a sound wave. High-pitched sounds are likely to be shrilling, whereas the lower-pitched will be bassy. Pitch depends upon the frequency of the sound waves producing them. In short, notes at a higher frequency are high-pitched.

On the contrary, notes at lower frequencies are low-pitched. Changing a pitch of noise from low to high or vice versa is an art. Thus, sound recording and editing applications like Audacity come with the in-built effect that enables you to change the pitch of a sound.

Part 2: How to Change Pitch in Audacity?

Sound editing is becoming increasingly popular in music and other relevant industries. Several applications offer sound editing tools to serve the needs of the people. Pitch-changing is one of the common tools that people look for in sound editors.

Audacity is one of the notable software that allows users to change the pitch of the voice. It comes with an Audacity pitch shift mechanism to facilitate users. So, if you are editing sound in Audacity, changing the pitch is just a matter of a few clicks. Are you still wondering how you can apply the Audacity change pitch technique when editing? Here’s how you can do it in simple steps.

Step 1: Select the audio portion

Launch Audacity and add sound recordings you want to edit. Click on the timeline and drag to select the portion of the sound.

Note: Only the portion whose pitch you want to change.

Step 2: Open Effect menu

Click on the Effect tab at the top right of the screen next to Generate. Select Pitch Change from the drop-down menu.

Note: You can also make other changes, such as Change Speed and Change Tempo option will let you alter the speed of the sound. So, the pitch can also be altered using this process.

Step 3: Adjust pitch

Drag the slider to alter the pitch of the sound and press the OK button to apply changes.

Note: To increase pitch, slide towards the right. Similarly, slide towards the left to a lower pitch. In addition, the pitch can also be changed by configuring From and To parameters.

Bonus Section: How to Adjust Sound Louder in Audacity?

Volume in an audio file may or may not be ideal for use. Sometimes, the sound is too loud or low. Audacity can help you in such a situation. So, if you are editing sound recordings in Audacity, you can also fix the volume of the sound. The good thing to note is that you can adjust the sound in both directions, which implies you can easily amplify or reduce the volume in these open-source applications. Are you interested in knowing about the volume adjustment process in Audacity? If yes, we have summarized the process in simple steps. Let’s take a look.

Step 1: Add an audio file

Launch the software and click on File. Select Open and select the desired audio.

Note: It is not recommended to change the volume through the playback volume knob at the top right corner of the screen, as this will only increase the volume in your device. However, the actual volume of the audio will remain unchanged.

Step 2: Increase/Decrease audio gain

Change the gain of the audio at the left-hand side of the screen. Move the slider to adjust the volume to the desired level.

Note: Alternatively, you may also increase or increase the volume through the amplification process. To use this method, select the audio portion, access Effect, and tap Amplify. Tick allow clipping box and move the slider to set the volume of the sound.

Conclusion

There are high chances of audio sound not being in the required pitch or volume. Plus, you may also need to change the sound characteristics of an audio file for specific use. So, if this is the case, the Audacity change pitch technique is all you need to learn. Thus, we have summarized the process of changing pitch and volume in a step-by-step guide in this article. Hopefully, all your concerns will have been addressed.

Navigating the Nuances of Audio Graphics: Plotting Waveform Data & Infusing Videos with Life-Like Animations Using Premiere Pro

By using waveform of the sound waves in Premiere Pro, we can better edit audio. In the following article, we’ll learn how the audio waveform auto-sync feature in Premiere Pro helps automatically align and merge clips in the Project panel, in the timeline, and when setting up a multicamera project and how to insert audio waveform on your clips using Premiere Pro.

Part 1. How to show Audio Waveform on clips in Premiere Pro? (2 ways)

Users frequently complain that the audio waveform can suddenly disappear while editing audio in Premiere Pro, which is quite annoying to deal with. In the following tutorial, I’m going to show you how to make the audio waveforms visible.

1. Click the wrench icon on settings button

If you are not seeing them on audio clips on your timeline, then you drag on an audio clip to your timeline or your sequence and just click on the wrench and check to show audio waveform.

Once you check that you should see the audio waveforms on your clip you can click it again you should see a checkmark and it is highlighted in blue and if you don’t want to see them all you have to do is click it again.

That will toggle off the audio waveforms and that is how to show the audio waveforms on your audio clips in adobe premiere pro.

2. Automatic generate audio waveform

Make sure “Automatic audio waveform creation” is selected by going to “Edit > Preferences > Audio” first. When importing files, no waveforms are generated if option is unticked. Only clips you import moving forward will be impacted by this; clips already imported won’t be affected.

Second, for creating audio waveforms on clips that don’t have them, select the clips in the Program panel and go to “Clip > Generate Audio Waveform”.

Part 2. How to add audio waveform animation in Premiere Pro?

If you want to simply add a dynamic effect to your audio, just follow the tutorial below.

Step1Click After Effects Composition

First, make sure both the video and audio are selected. Right-click and select replace with After Effects composition.

Step2Create a new solid in After Effects

After creating a new project in After Effects, you need to choose a new solid of any color in your composition.

Step3Open audio waveform effect

Search audio waveform and drag and drop this effect on your solid. The waveform will now respond to the audio in your film if you use the audio layer option for your clip in the effect parameters for your solid change.

Step4Adjust the audio waveform effect

The position of the waveform on your video can be changed by utilizing the start and end point settings. Make sure the last values for each selections are the same to maintain an even level. Next, you can change the characteristics to give your waveform the desired appearance. Here, I applied some fundamental settings that are effective for singing. Using the two-color picker options and the display options, you may also change the waveform’s inner and outer colors.

Step5Check the animation and export the video

Back in Premiere, you can pick whether you want the traditional analog lines to appear or a more contemporary digital waveform. Your clip will now be replaced with an After Effects composition that is dynamically tied to the audio waveform.

Part 3. How to change the incorrect audio waveform in Premiere Pro?

These problems typically result from corrupted cache/peak files. If you have cleared the cache from the application. I will recommend cleaning them manually by going to the location specified in “Preferences > Media Cache”.

Clean the contents of the folder named Media Cache, Media Cache files, and Peak files (Before cleaning them, please ensure to open these folders once and verify if they have any of the media files in them to avoid any accidental deletion of required media or asset).

Please make sure that the option “Save.cfa and.pek cache files next to the original media files when possible” is unchecked. If it is ticked, you will have to remove them by hand from the folders where the media files are kept.

The Audio previews can also be cleaned (File > Project Settings > Scratch Disks > Audio Previews).

The following time you open the project, these files will be cleared. Rebuilding the necessary cache and peak files could take some time.

Part 4. How to add audio waveform animation to video with Premiere Pro alternative?

In reality, based on the above process, it is clear that you must use After Effects to add audio waveform animation effects in Premiere Pro. Although you can further modify the animation, this approach is very difficult for beginners to understand, and it has a high learning cost. In this situation, we strongly advise you to try Filmora Audio Visualizer . We provide more than 25 animation effects and fixed pre-made waveform elements, and you can also adjust the color and frequency in Advanced Settings. Come and give it a try!

Conclusion

This article will help you in resolving various audio waveform issues in Premiere Pro. Additionally, you can discover how to create waveforms in your audio clips. You should try Wondershare Filmora to add the waveform animation even if Premiere Pro is one of the greatest audio and video editing programs. Beginners will find it more convenient and simpler. If you simply want to quickly polish your music video or podcast video, the Filmora audio visualizer is a better option.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Conclusion

This article will help you in resolving various audio waveform issues in Premiere Pro. Additionally, you can discover how to create waveforms in your audio clips. You should try Wondershare Filmora to add the waveform animation even if Premiere Pro is one of the greatest audio and video editing programs. Beginners will find it more convenient and simpler. If you simply want to quickly polish your music video or podcast video, the Filmora audio visualizer is a better option.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

The Ultimate Guide to Audio Length Reduction in Apple’s iMovie App

Cutting Audio in iMovie: A Guide for Mac and iPhone Users

Marion Dubois

Apr 30, 2024• Proven solutions

Sometimes, we find the desired audio or soundtrack for our videos longer or shorter than we want, and that is where audio editing comes. Audio editing refers to manipulating audio to alter the length, speed, and volume or create additional effects such as loops. Are you new to audio trimming? Don’t worry, as our article today would show how to cut audio in iMovie on Mac and iPhone.

Part 1: How to Cut Music in iMovie on Mac?

Cutting music is audio editing carried out when the music or soundtrack seems longer than desired. To cut music or soundtrack in iMovie using Mac involves the following steps:

Step 1: Adjust the Playhead to Cut the Clip

You can cut an audio clip only when the specified audio is in the timeline. To perform the operation, right-click on the clip and pick out a split clip. This operation cuts the clip into two and divides the two pieces wherever the playhead is situated.

Step 2: Select Split Clip

Right-click and select the Split Clip. Once this step is over, you have successfully cut the audio clip.

Part 2: Cut Audio in iMovie Alternative – Wondershare Filmora

Generally, as humans, we feel more satisfied when we have options or choices because we get fed up with doing the same over and over again the same way without changes. Wondershare Filmora is an alternative for iMovie and can easily carry out the function of various forms of audio editing.

If you wish to trim off the beginning or the ending of a mp3 file quite swiftly, this section is for you. Things can get specifically weird if you want to import heavy mp3 files to your space-limited MP3 player to play.

You’re required to choose an intelligent MP3 trimmer to trim an MP3 file to any length. Here, we suggest this robust video editing software — Wondershare Filmora, which enables you to precisely extract an MP3 file or audio segment effortlessly without losing any original audio quality.

You can get both the Windows and Mac versions of this great video editor. It embodies the following features:

• Import videos, audio, or photos from various sources and edit them in one place.
• Three different video cutting methods to meet different editing needs.
• Various editing tools help you edit the video completely, including rotation, picture-in-picture, green screen, cropping, etc.
• Output the edited video to more than 20 different formats or locations as needed.
• Use more than 1,000 video effects in the effect store to customize videos.

Using Filmora is quite effortless. The following tutorial will display how to cut audio in it easily and quickly.

Step 1: Import MP3 Files for Editing

Firstly, drag the specific MP3 file or audio clip into the media library, or you can directly import audio files or video from portable devices such as your digital camera, smartphone, or camcorder, etc.

Step 2: Drag MP3 Files to the Timeline below for Cutting

Filmora provides two ways to cut audio/video files. You can either select to cut from the beginning or the end by trimming. You can also split it into various segments from the mid-sections.

Move the slider ahead to the cutting point within the midsection, and then tap the scissor icon to split it into little sections as desired.

When executed, please select the part that you don’t want to, hit the Delete button to remove.

Step 3: Export to Save

Hit the Export tab to save your edited project. If you want to save in the original MP3 format, select MP3 before you export.

Part 3: How to Trim Music in iMovie on iPhone

This section will offer you a guide on how to cut out parts of audio in an iMovie project on an iPad or iPhone. After adding music to your project, the audio is trimmed to the desired length using iMovie’s inbuilt tool.

Step #1: Open iMovie on your iPhone or iPad.

Step #2: Tap the movie project you want to edit.

It will display a list of your projects, among which you must select the one you want to edit.

If you want to edit a current section of video not even opened in iMovie, you have to make a new iMovie project to add your audio and video. Select the + icon, choose the Movie tab, select the video(s), and then choose the Create movie button.

Step #3: Hit the Edit button below the name of your project.

This opens your project in the editor. And, you’re already in the editor if you just created a new project in the previous step.

Step #4: Add audio to your project.

You can skip this step if your project already contains the audio. Hit the + icon in the upper-left timeline’s corner.

Choose Audio.

Go with a specific category:

Soundtracks are audio tracks provided by iMovie which are free to use in your project.

Select My Music to locate the file and use a song from iTunes or the music app.

Sound effects are shorter sounds—mostly below 10 seconds duration.

Choose an audio file for the preview.

Select the + icon to add the file to your project.

Step #5: Hit the audio bar on the timeline.

It is present below the multi-frame version of your video in the screen’s bottom area.

Now, detach the MP3 segment or audio from the video by tapping the video on the timeline and selecting the Detach button at the screen’s bottom area.

Step #6: Tap and drag the beginning of the audio track.

Drag or move the audio track to the exact point where you wish it to start from—the audio track’s left-end marks of the yellow bar starting your audio.

Step #7: Tap and drag the end of the audio track.

You can drag the yellow bar at the end and move it to the exact point where you want the audio to end.

If you can’t see the yellow bar on the far-right end of the audio track, swipe left below the audio track to scroll to the end.

To move the audio track to another location, select and hold it for about one second, and then move it to the desired video’s location.

Step #8: Select the Play tab for preview.

It’s the sideways triangle just below the video preview.

Step #9: Select the Done button when you’re finished.

It is present at the screen’s top-left corner. You have now confirmed the changes done to your project.

If you want to play it on any other device, tap the Share button at the bottom after choosing the Done tab and select Save Video to export it.

Part 4: Audio Editing Tips for iMovie Users

Here are some guidelines or tips for various audio editing processes, starting from cutting trim music on iMovie, using iMovie to trim audio and video together, and other audio and video editing tips.

• Use Waveforms to See What You Hear

Sound is just as relevant as the images in a video, and should focus just as much during editing. To efficiently and adequately edit audio, you need a good set of speakers and headphones to hear the sound, and you also need to be able to see the sound.

If the waveforms don’t appear, go to the “view” drop-down menu and select “show waveforms”, the waveform would show you the sound intensity level of a sound clip and definitely would give you an idea of what part will need to be turned up or down.

• Audio Adjustments

With the audio button situated at the top right, you have access to some essential audio editing tools for changing the sound level of your chosen clip or changing the relative volume of other films in the project.

The audio editing window also contains primary noise reduction and audio equalization tools and a range of effects – from robot to echo- which would affect how people sound in your video.

• Editing Audio with the Timeline

iMovie permits you to adjust the audio within the clips themselves, each volume as a bar. You can shift up and down to increase or decrease the audio level. The clips also have “fade in” and “fade out” buttons at the beginning and end, which are draggable to adjust the fade length.

Conclusion

Finally, with the answers to the question, how to cut audio in iMovie, you can follow the simple step guide and feel free to edit your audio or video to your taste using iMovie or Wondershare Filmora.

Marion Dubois

Marion Dubois is a writer and a lover of all things video.

Follow @Marion Dubois

Marion Dubois

Apr 30, 2024• Proven solutions

Sometimes, we find the desired audio or soundtrack for our videos longer or shorter than we want, and that is where audio editing comes. Audio editing refers to manipulating audio to alter the length, speed, and volume or create additional effects such as loops. Are you new to audio trimming? Don’t worry, as our article today would show how to cut audio in iMovie on Mac and iPhone.

Part 1: How to Cut Music in iMovie on Mac?

Cutting music is audio editing carried out when the music or soundtrack seems longer than desired. To cut music or soundtrack in iMovie using Mac involves the following steps:

Step 1: Adjust the Playhead to Cut the Clip

You can cut an audio clip only when the specified audio is in the timeline. To perform the operation, right-click on the clip and pick out a split clip. This operation cuts the clip into two and divides the two pieces wherever the playhead is situated.

Step 2: Select Split Clip

Right-click and select the Split Clip. Once this step is over, you have successfully cut the audio clip.

Part 2: Cut Audio in iMovie Alternative – Wondershare Filmora

Generally, as humans, we feel more satisfied when we have options or choices because we get fed up with doing the same over and over again the same way without changes. Wondershare Filmora is an alternative for iMovie and can easily carry out the function of various forms of audio editing.

If you wish to trim off the beginning or the ending of a mp3 file quite swiftly, this section is for you. Things can get specifically weird if you want to import heavy mp3 files to your space-limited MP3 player to play.

You’re required to choose an intelligent MP3 trimmer to trim an MP3 file to any length. Here, we suggest this robust video editing software — Wondershare Filmora, which enables you to precisely extract an MP3 file or audio segment effortlessly without losing any original audio quality.

You can get both the Windows and Mac versions of this great video editor. It embodies the following features:

• Import videos, audio, or photos from various sources and edit them in one place.
• Three different video cutting methods to meet different editing needs.
• Various editing tools help you edit the video completely, including rotation, picture-in-picture, green screen, cropping, etc.
• Output the edited video to more than 20 different formats or locations as needed.
• Use more than 1,000 video effects in the effect store to customize videos.

Using Filmora is quite effortless. The following tutorial will display how to cut audio in it easily and quickly.

Step 1: Import MP3 Files for Editing

Firstly, drag the specific MP3 file or audio clip into the media library, or you can directly import audio files or video from portable devices such as your digital camera, smartphone, or camcorder, etc.

Step 2: Drag MP3 Files to the Timeline below for Cutting

Filmora provides two ways to cut audio/video files. You can either select to cut from the beginning or the end by trimming. You can also split it into various segments from the mid-sections.

Move the slider ahead to the cutting point within the midsection, and then tap the scissor icon to split it into little sections as desired.

When executed, please select the part that you don’t want to, hit the Delete button to remove.

Step 3: Export to Save

Hit the Export tab to save your edited project. If you want to save in the original MP3 format, select MP3 before you export.

Part 3: How to Trim Music in iMovie on iPhone

This section will offer you a guide on how to cut out parts of audio in an iMovie project on an iPad or iPhone. After adding music to your project, the audio is trimmed to the desired length using iMovie’s inbuilt tool.

Step #1: Open iMovie on your iPhone or iPad.

Step #2: Tap the movie project you want to edit.

It will display a list of your projects, among which you must select the one you want to edit.

If you want to edit a current section of video not even opened in iMovie, you have to make a new iMovie project to add your audio and video. Select the + icon, choose the Movie tab, select the video(s), and then choose the Create movie button.

Step #3: Hit the Edit button below the name of your project.

This opens your project in the editor. And, you’re already in the editor if you just created a new project in the previous step.

Step #4: Add audio to your project.

You can skip this step if your project already contains the audio. Hit the + icon in the upper-left timeline’s corner.

Choose Audio.

Go with a specific category:

Soundtracks are audio tracks provided by iMovie which are free to use in your project.

Select My Music to locate the file and use a song from iTunes or the music app.

Sound effects are shorter sounds—mostly below 10 seconds duration.

Choose an audio file for the preview.

Select the + icon to add the file to your project.

Step #5: Hit the audio bar on the timeline.

It is present below the multi-frame version of your video in the screen’s bottom area.

Now, detach the MP3 segment or audio from the video by tapping the video on the timeline and selecting the Detach button at the screen’s bottom area.

Step #6: Tap and drag the beginning of the audio track.

Drag or move the audio track to the exact point where you wish it to start from—the audio track’s left-end marks of the yellow bar starting your audio.

Step #7: Tap and drag the end of the audio track.

You can drag the yellow bar at the end and move it to the exact point where you want the audio to end.

If you can’t see the yellow bar on the far-right end of the audio track, swipe left below the audio track to scroll to the end.

To move the audio track to another location, select and hold it for about one second, and then move it to the desired video’s location.

Step #8: Select the Play tab for preview.

It’s the sideways triangle just below the video preview.

Step #9: Select the Done button when you’re finished.

It is present at the screen’s top-left corner. You have now confirmed the changes done to your project.

If you want to play it on any other device, tap the Share button at the bottom after choosing the Done tab and select Save Video to export it.

Part 4: Audio Editing Tips for iMovie Users

Here are some guidelines or tips for various audio editing processes, starting from cutting trim music on iMovie, using iMovie to trim audio and video together, and other audio and video editing tips.

• Use Waveforms to See What You Hear

Sound is just as relevant as the images in a video, and should focus just as much during editing. To efficiently and adequately edit audio, you need a good set of speakers and headphones to hear the sound, and you also need to be able to see the sound.

If the waveforms don’t appear, go to the “view” drop-down menu and select “show waveforms”, the waveform would show you the sound intensity level of a sound clip and definitely would give you an idea of what part will need to be turned up or down.

• Audio Adjustments

With the audio button situated at the top right, you have access to some essential audio editing tools for changing the sound level of your chosen clip or changing the relative volume of other films in the project.

The audio editing window also contains primary noise reduction and audio equalization tools and a range of effects – from robot to echo- which would affect how people sound in your video.

• Editing Audio with the Timeline

iMovie permits you to adjust the audio within the clips themselves, each volume as a bar. You can shift up and down to increase or decrease the audio level. The clips also have “fade in” and “fade out” buttons at the beginning and end, which are draggable to adjust the fade length.

Conclusion

Finally, with the answers to the question, how to cut audio in iMovie, you can follow the simple step guide and feel free to edit your audio or video to your taste using iMovie or Wondershare Filmora.

Marion Dubois

Marion Dubois is a writer and a lover of all things video.

Follow @Marion Dubois

Marion Dubois

Apr 30, 2024• Proven solutions

Sometimes, we find the desired audio or soundtrack for our videos longer or shorter than we want, and that is where audio editing comes. Audio editing refers to manipulating audio to alter the length, speed, and volume or create additional effects such as loops. Are you new to audio trimming? Don’t worry, as our article today would show how to cut audio in iMovie on Mac and iPhone.

Part 1: How to Cut Music in iMovie on Mac?

Cutting music is audio editing carried out when the music or soundtrack seems longer than desired. To cut music or soundtrack in iMovie using Mac involves the following steps:

Step 1: Adjust the Playhead to Cut the Clip

You can cut an audio clip only when the specified audio is in the timeline. To perform the operation, right-click on the clip and pick out a split clip. This operation cuts the clip into two and divides the two pieces wherever the playhead is situated.

Step 2: Select Split Clip

Right-click and select the Split Clip. Once this step is over, you have successfully cut the audio clip.

Part 2: Cut Audio in iMovie Alternative – Wondershare Filmora

Generally, as humans, we feel more satisfied when we have options or choices because we get fed up with doing the same over and over again the same way without changes. Wondershare Filmora is an alternative for iMovie and can easily carry out the function of various forms of audio editing.

If you wish to trim off the beginning or the ending of a mp3 file quite swiftly, this section is for you. Things can get specifically weird if you want to import heavy mp3 files to your space-limited MP3 player to play.

You’re required to choose an intelligent MP3 trimmer to trim an MP3 file to any length. Here, we suggest this robust video editing software — Wondershare Filmora, which enables you to precisely extract an MP3 file or audio segment effortlessly without losing any original audio quality.

You can get both the Windows and Mac versions of this great video editor. It embodies the following features:

• Import videos, audio, or photos from various sources and edit them in one place.
• Three different video cutting methods to meet different editing needs.
• Various editing tools help you edit the video completely, including rotation, picture-in-picture, green screen, cropping, etc.
• Output the edited video to more than 20 different formats or locations as needed.
• Use more than 1,000 video effects in the effect store to customize videos.

Using Filmora is quite effortless. The following tutorial will display how to cut audio in it easily and quickly.

Step 1: Import MP3 Files for Editing

Firstly, drag the specific MP3 file or audio clip into the media library, or you can directly import audio files or video from portable devices such as your digital camera, smartphone, or camcorder, etc.

Step 2: Drag MP3 Files to the Timeline below for Cutting

Filmora provides two ways to cut audio/video files. You can either select to cut from the beginning or the end by trimming. You can also split it into various segments from the mid-sections.

Move the slider ahead to the cutting point within the midsection, and then tap the scissor icon to split it into little sections as desired.

When executed, please select the part that you don’t want to, hit the Delete button to remove.

Step 3: Export to Save

Hit the Export tab to save your edited project. If you want to save in the original MP3 format, select MP3 before you export.

Part 3: How to Trim Music in iMovie on iPhone

This section will offer you a guide on how to cut out parts of audio in an iMovie project on an iPad or iPhone. After adding music to your project, the audio is trimmed to the desired length using iMovie’s inbuilt tool.

Step #1: Open iMovie on your iPhone or iPad.

Step #2: Tap the movie project you want to edit.

It will display a list of your projects, among which you must select the one you want to edit.

If you want to edit a current section of video not even opened in iMovie, you have to make a new iMovie project to add your audio and video. Select the + icon, choose the Movie tab, select the video(s), and then choose the Create movie button.

Step #3: Hit the Edit button below the name of your project.

This opens your project in the editor. And, you’re already in the editor if you just created a new project in the previous step.

Step #4: Add audio to your project.

You can skip this step if your project already contains the audio. Hit the + icon in the upper-left timeline’s corner.

Choose Audio.

Go with a specific category:

Soundtracks are audio tracks provided by iMovie which are free to use in your project.

Select My Music to locate the file and use a song from iTunes or the music app.

Sound effects are shorter sounds—mostly below 10 seconds duration.

Choose an audio file for the preview.

Select the + icon to add the file to your project.

Step #5: Hit the audio bar on the timeline.

It is present below the multi-frame version of your video in the screen’s bottom area.

Now, detach the MP3 segment or audio from the video by tapping the video on the timeline and selecting the Detach button at the screen’s bottom area.

Step #6: Tap and drag the beginning of the audio track.

Drag or move the audio track to the exact point where you wish it to start from—the audio track’s left-end marks of the yellow bar starting your audio.

Step #7: Tap and drag the end of the audio track.

You can drag the yellow bar at the end and move it to the exact point where you want the audio to end.

If you can’t see the yellow bar on the far-right end of the audio track, swipe left below the audio track to scroll to the end.

To move the audio track to another location, select and hold it for about one second, and then move it to the desired video’s location.

Step #8: Select the Play tab for preview.

It’s the sideways triangle just below the video preview.

Step #9: Select the Done button when you’re finished.

It is present at the screen’s top-left corner. You have now confirmed the changes done to your project.

If you want to play it on any other device, tap the Share button at the bottom after choosing the Done tab and select Save Video to export it.

Part 4: Audio Editing Tips for iMovie Users

Here are some guidelines or tips for various audio editing processes, starting from cutting trim music on iMovie, using iMovie to trim audio and video together, and other audio and video editing tips.

• Use Waveforms to See What You Hear

Sound is just as relevant as the images in a video, and should focus just as much during editing. To efficiently and adequately edit audio, you need a good set of speakers and headphones to hear the sound, and you also need to be able to see the sound.

If the waveforms don’t appear, go to the “view” drop-down menu and select “show waveforms”, the waveform would show you the sound intensity level of a sound clip and definitely would give you an idea of what part will need to be turned up or down.

• Audio Adjustments

With the audio button situated at the top right, you have access to some essential audio editing tools for changing the sound level of your chosen clip or changing the relative volume of other films in the project.

The audio editing window also contains primary noise reduction and audio equalization tools and a range of effects – from robot to echo- which would affect how people sound in your video.

• Editing Audio with the Timeline

iMovie permits you to adjust the audio within the clips themselves, each volume as a bar. You can shift up and down to increase or decrease the audio level. The clips also have “fade in” and “fade out” buttons at the beginning and end, which are draggable to adjust the fade length.

Conclusion

Finally, with the answers to the question, how to cut audio in iMovie, you can follow the simple step guide and feel free to edit your audio or video to your taste using iMovie or Wondershare Filmora.

Marion Dubois

Marion Dubois is a writer and a lover of all things video.

Follow @Marion Dubois

Marion Dubois

Apr 30, 2024• Proven solutions

Sometimes, we find the desired audio or soundtrack for our videos longer or shorter than we want, and that is where audio editing comes. Audio editing refers to manipulating audio to alter the length, speed, and volume or create additional effects such as loops. Are you new to audio trimming? Don’t worry, as our article today would show how to cut audio in iMovie on Mac and iPhone.

Part 1: How to Cut Music in iMovie on Mac?

Cutting music is audio editing carried out when the music or soundtrack seems longer than desired. To cut music or soundtrack in iMovie using Mac involves the following steps:

Step 1: Adjust the Playhead to Cut the Clip

You can cut an audio clip only when the specified audio is in the timeline. To perform the operation, right-click on the clip and pick out a split clip. This operation cuts the clip into two and divides the two pieces wherever the playhead is situated.

Step 2: Select Split Clip

Right-click and select the Split Clip. Once this step is over, you have successfully cut the audio clip.

Part 2: Cut Audio in iMovie Alternative – Wondershare Filmora

Generally, as humans, we feel more satisfied when we have options or choices because we get fed up with doing the same over and over again the same way without changes. Wondershare Filmora is an alternative for iMovie and can easily carry out the function of various forms of audio editing.

If you wish to trim off the beginning or the ending of a mp3 file quite swiftly, this section is for you. Things can get specifically weird if you want to import heavy mp3 files to your space-limited MP3 player to play.

You’re required to choose an intelligent MP3 trimmer to trim an MP3 file to any length. Here, we suggest this robust video editing software — Wondershare Filmora, which enables you to precisely extract an MP3 file or audio segment effortlessly without losing any original audio quality.

You can get both the Windows and Mac versions of this great video editor. It embodies the following features:

• Import videos, audio, or photos from various sources and edit them in one place.
• Three different video cutting methods to meet different editing needs.
• Various editing tools help you edit the video completely, including rotation, picture-in-picture, green screen, cropping, etc.
• Output the edited video to more than 20 different formats or locations as needed.
• Use more than 1,000 video effects in the effect store to customize videos.

Using Filmora is quite effortless. The following tutorial will display how to cut audio in it easily and quickly.

Step 1: Import MP3 Files for Editing

Firstly, drag the specific MP3 file or audio clip into the media library, or you can directly import audio files or video from portable devices such as your digital camera, smartphone, or camcorder, etc.

Step 2: Drag MP3 Files to the Timeline below for Cutting

Filmora provides two ways to cut audio/video files. You can either select to cut from the beginning or the end by trimming. You can also split it into various segments from the mid-sections.

Move the slider ahead to the cutting point within the midsection, and then tap the scissor icon to split it into little sections as desired.

When executed, please select the part that you don’t want to, hit the Delete button to remove.

Step 3: Export to Save

Hit the Export tab to save your edited project. If you want to save in the original MP3 format, select MP3 before you export.

Part 3: How to Trim Music in iMovie on iPhone

This section will offer you a guide on how to cut out parts of audio in an iMovie project on an iPad or iPhone. After adding music to your project, the audio is trimmed to the desired length using iMovie’s inbuilt tool.

Step #1: Open iMovie on your iPhone or iPad.

Step #2: Tap the movie project you want to edit.

It will display a list of your projects, among which you must select the one you want to edit.

If you want to edit a current section of video not even opened in iMovie, you have to make a new iMovie project to add your audio and video. Select the + icon, choose the Movie tab, select the video(s), and then choose the Create movie button.

Step #3: Hit the Edit button below the name of your project.

This opens your project in the editor. And, you’re already in the editor if you just created a new project in the previous step.

Step #4: Add audio to your project.

You can skip this step if your project already contains the audio. Hit the + icon in the upper-left timeline’s corner.

Choose Audio.

Go with a specific category:

Soundtracks are audio tracks provided by iMovie which are free to use in your project.

Select My Music to locate the file and use a song from iTunes or the music app.

Sound effects are shorter sounds—mostly below 10 seconds duration.

Choose an audio file for the preview.

Select the + icon to add the file to your project.

Step #5: Hit the audio bar on the timeline.

It is present below the multi-frame version of your video in the screen’s bottom area.

Now, detach the MP3 segment or audio from the video by tapping the video on the timeline and selecting the Detach button at the screen’s bottom area.

Step #6: Tap and drag the beginning of the audio track.

Drag or move the audio track to the exact point where you wish it to start from—the audio track’s left-end marks of the yellow bar starting your audio.

Step #7: Tap and drag the end of the audio track.

You can drag the yellow bar at the end and move it to the exact point where you want the audio to end.

If you can’t see the yellow bar on the far-right end of the audio track, swipe left below the audio track to scroll to the end.

To move the audio track to another location, select and hold it for about one second, and then move it to the desired video’s location.

Step #8: Select the Play tab for preview.

It’s the sideways triangle just below the video preview.

Step #9: Select the Done button when you’re finished.

It is present at the screen’s top-left corner. You have now confirmed the changes done to your project.

If you want to play it on any other device, tap the Share button at the bottom after choosing the Done tab and select Save Video to export it.

Part 4: Audio Editing Tips for iMovie Users

Here are some guidelines or tips for various audio editing processes, starting from cutting trim music on iMovie, using iMovie to trim audio and video together, and other audio and video editing tips.

• Use Waveforms to See What You Hear

Sound is just as relevant as the images in a video, and should focus just as much during editing. To efficiently and adequately edit audio, you need a good set of speakers and headphones to hear the sound, and you also need to be able to see the sound.

If the waveforms don’t appear, go to the “view” drop-down menu and select “show waveforms”, the waveform would show you the sound intensity level of a sound clip and definitely would give you an idea of what part will need to be turned up or down.

• Audio Adjustments

With the audio button situated at the top right, you have access to some essential audio editing tools for changing the sound level of your chosen clip or changing the relative volume of other films in the project.

The audio editing window also contains primary noise reduction and audio equalization tools and a range of effects – from robot to echo- which would affect how people sound in your video.

• Editing Audio with the Timeline

iMovie permits you to adjust the audio within the clips themselves, each volume as a bar. You can shift up and down to increase or decrease the audio level. The clips also have “fade in” and “fade out” buttons at the beginning and end, which are draggable to adjust the fade length.

Conclusion

Finally, with the answers to the question, how to cut audio in iMovie, you can follow the simple step guide and feel free to edit your audio or video to your taste using iMovie or Wondershare Filmora.

Marion Dubois

Marion Dubois is a writer and a lover of all things video.

Follow @Marion Dubois

Also read: