“Trimming Sound: Extracting Silence From MOV Clips on PC & Mac Systems”

How to Remove Audio from MOV Files on Windows/Mac

Shanoon Cox

Mar 27, 2024• Proven solutions

When editing a video QuickTime MOV file, sometimes you may need toremove audio tracks bundled with it so that you can add a different audio track. Although a range of video editing programs can help you achieve this, I think Wondershare Filmora is worth trying. This program is cross-platform so that it can help you remove audio completely from the original MOV files with ease in both Windows and Mac.

Related Article:
How Replace Audio Track in Video >>
Mix Audio Tracks into One File >>

Below is a detailed tutorial on how to remove audio from QuickTime MOV files in Windows (Widnows XP/Vista/7/8/10 included). If you’re running a Mac, you can adopt Filmora for Ma to achieve the same. Before getting started, please download and install the right version for your operating system.

Remove audio from quicktime videos

To remove audio from video, you can simply mute the video audio in Filmora or you can remove the audio track from the video. Below we will share you how to remove the audio track in QuickTime .MOV video with Filmora.

1 Import the source video files

After download and initiating this audio remover, choose between 16:9, 1:1, 9:16 and 4:3 ratio rates. Then click the “Import” button to add the source video files to the this video & audio editing software. You can also directly drag and drop your MOV video files to the media library. After importing the source video files, drag and place them to the video timeline.

2 Remove audio from QuickTime MOV files

Double click the target MOV video file in the timeline to highlight it. Then right click the video file and select “Audio Detach” option. The program will automatically separate the existing audio track from the original video file. You will find the separated audio track will appear in the Audio track. To remove the audio from MOV video, right click the audio track and choose “Delete”. If you want to keep the audio file in the video, you can click “Mute” and the video audio will not appear in the video.

Tip: This video editing tool also enables you to easily add your own sound track. To do this, just import the audio file as step 1 and then drag and drop it to the audio timeline. If the audio needs editing, double click it to adjust the volume, speed, pitch or add fade in/out effect in the pop up window.

Learn the detailed info about How to add voiceover?

Note: If you just want toremove the background audio noise from the .MOV video , you can achieve it with the De-noise feature. To do that, just double click the audio file in the time to enter the audio editing window. In the pop-up window, click the De-noise option and Filmora will remove the audio noise from the .mov video.

3 Export or save the new files

Click the “Play” button in the right preview window to see the result. If you’re satisfied, hit “Export” and you’ll go to the export window. As you see, this program offers four output ways. In the “Format” tab, you can save the new work in all popular formats such as AVI, MP4, MOV, FLV and much more. You can also convert your video to a YouTube compatible format for online sharing in the “YouTube” tab and immediately upload it. Or burn a DVD disk in minutes to watch it on your home cinema.

Besides removing audio from video, Filmora allows you to edit .MOV videos further, including changing video speed, and some advanced video editing features such as green screen and video stabilization. Check the video tutorial below to check how to edit videos with Filmora.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

When editing a video QuickTime MOV file, sometimes you may need toremove audio tracks bundled with it so that you can add a different audio track. Although a range of video editing programs can help you achieve this, I think Wondershare Filmora is worth trying. This program is cross-platform so that it can help you remove audio completely from the original MOV files with ease in both Windows and Mac.

Related Article:
How Replace Audio Track in Video >>
Mix Audio Tracks into One File >>

Below is a detailed tutorial on how to remove audio from QuickTime MOV files in Windows (Widnows XP/Vista/7/8/10 included). If you’re running a Mac, you can adopt Filmora for Ma to achieve the same. Before getting started, please download and install the right version for your operating system.

Remove audio from quicktime videos

To remove audio from video, you can simply mute the video audio in Filmora or you can remove the audio track from the video. Below we will share you how to remove the audio track in QuickTime .MOV video with Filmora.

1 Import the source video files

After download and initiating this audio remover, choose between 16:9, 1:1, 9:16 and 4:3 ratio rates. Then click the “Import” button to add the source video files to the this video & audio editing software. You can also directly drag and drop your MOV video files to the media library. After importing the source video files, drag and place them to the video timeline.

2 Remove audio from QuickTime MOV files

Double click the target MOV video file in the timeline to highlight it. Then right click the video file and select “Audio Detach” option. The program will automatically separate the existing audio track from the original video file. You will find the separated audio track will appear in the Audio track. To remove the audio from MOV video, right click the audio track and choose “Delete”. If you want to keep the audio file in the video, you can click “Mute” and the video audio will not appear in the video.

Tip: This video editing tool also enables you to easily add your own sound track. To do this, just import the audio file as step 1 and then drag and drop it to the audio timeline. If the audio needs editing, double click it to adjust the volume, speed, pitch or add fade in/out effect in the pop up window.

Learn the detailed info about How to add voiceover?

Note: If you just want toremove the background audio noise from the .MOV video , you can achieve it with the De-noise feature. To do that, just double click the audio file in the time to enter the audio editing window. In the pop-up window, click the De-noise option and Filmora will remove the audio noise from the .mov video.

3 Export or save the new files

Click the “Play” button in the right preview window to see the result. If you’re satisfied, hit “Export” and you’ll go to the export window. As you see, this program offers four output ways. In the “Format” tab, you can save the new work in all popular formats such as AVI, MP4, MOV, FLV and much more. You can also convert your video to a YouTube compatible format for online sharing in the “YouTube” tab and immediately upload it. Or burn a DVD disk in minutes to watch it on your home cinema.

Besides removing audio from video, Filmora allows you to edit .MOV videos further, including changing video speed, and some advanced video editing features such as green screen and video stabilization. Check the video tutorial below to check how to edit videos with Filmora.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

When editing a video QuickTime MOV file, sometimes you may need toremove audio tracks bundled with it so that you can add a different audio track. Although a range of video editing programs can help you achieve this, I think Wondershare Filmora is worth trying. This program is cross-platform so that it can help you remove audio completely from the original MOV files with ease in both Windows and Mac.

Related Article:
How Replace Audio Track in Video >>
Mix Audio Tracks into One File >>

Below is a detailed tutorial on how to remove audio from QuickTime MOV files in Windows (Widnows XP/Vista/7/8/10 included). If you’re running a Mac, you can adopt Filmora for Ma to achieve the same. Before getting started, please download and install the right version for your operating system.

Remove audio from quicktime videos

To remove audio from video, you can simply mute the video audio in Filmora or you can remove the audio track from the video. Below we will share you how to remove the audio track in QuickTime .MOV video with Filmora.

1 Import the source video files

After download and initiating this audio remover, choose between 16:9, 1:1, 9:16 and 4:3 ratio rates. Then click the “Import” button to add the source video files to the this video & audio editing software. You can also directly drag and drop your MOV video files to the media library. After importing the source video files, drag and place them to the video timeline.

2 Remove audio from QuickTime MOV files

Double click the target MOV video file in the timeline to highlight it. Then right click the video file and select “Audio Detach” option. The program will automatically separate the existing audio track from the original video file. You will find the separated audio track will appear in the Audio track. To remove the audio from MOV video, right click the audio track and choose “Delete”. If you want to keep the audio file in the video, you can click “Mute” and the video audio will not appear in the video.

Tip: This video editing tool also enables you to easily add your own sound track. To do this, just import the audio file as step 1 and then drag and drop it to the audio timeline. If the audio needs editing, double click it to adjust the volume, speed, pitch or add fade in/out effect in the pop up window.

Learn the detailed info about How to add voiceover?

Note: If you just want toremove the background audio noise from the .MOV video , you can achieve it with the De-noise feature. To do that, just double click the audio file in the time to enter the audio editing window. In the pop-up window, click the De-noise option and Filmora will remove the audio noise from the .mov video.

3 Export or save the new files

Click the “Play” button in the right preview window to see the result. If you’re satisfied, hit “Export” and you’ll go to the export window. As you see, this program offers four output ways. In the “Format” tab, you can save the new work in all popular formats such as AVI, MP4, MOV, FLV and much more. You can also convert your video to a YouTube compatible format for online sharing in the “YouTube” tab and immediately upload it. Or burn a DVD disk in minutes to watch it on your home cinema.

Besides removing audio from video, Filmora allows you to edit .MOV videos further, including changing video speed, and some advanced video editing features such as green screen and video stabilization. Check the video tutorial below to check how to edit videos with Filmora.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

Shanoon Cox

Mar 27, 2024• Proven solutions

When editing a video QuickTime MOV file, sometimes you may need toremove audio tracks bundled with it so that you can add a different audio track. Although a range of video editing programs can help you achieve this, I think Wondershare Filmora is worth trying. This program is cross-platform so that it can help you remove audio completely from the original MOV files with ease in both Windows and Mac.

Related Article:
How Replace Audio Track in Video >>
Mix Audio Tracks into One File >>

Below is a detailed tutorial on how to remove audio from QuickTime MOV files in Windows (Widnows XP/Vista/7/8/10 included). If you’re running a Mac, you can adopt Filmora for Ma to achieve the same. Before getting started, please download and install the right version for your operating system.

Remove audio from quicktime videos

To remove audio from video, you can simply mute the video audio in Filmora or you can remove the audio track from the video. Below we will share you how to remove the audio track in QuickTime .MOV video with Filmora.

1 Import the source video files

After download and initiating this audio remover, choose between 16:9, 1:1, 9:16 and 4:3 ratio rates. Then click the “Import” button to add the source video files to the this video & audio editing software. You can also directly drag and drop your MOV video files to the media library. After importing the source video files, drag and place them to the video timeline.

2 Remove audio from QuickTime MOV files

Double click the target MOV video file in the timeline to highlight it. Then right click the video file and select “Audio Detach” option. The program will automatically separate the existing audio track from the original video file. You will find the separated audio track will appear in the Audio track. To remove the audio from MOV video, right click the audio track and choose “Delete”. If you want to keep the audio file in the video, you can click “Mute” and the video audio will not appear in the video.

Tip: This video editing tool also enables you to easily add your own sound track. To do this, just import the audio file as step 1 and then drag and drop it to the audio timeline. If the audio needs editing, double click it to adjust the volume, speed, pitch or add fade in/out effect in the pop up window.

Learn the detailed info about How to add voiceover?

Note: If you just want toremove the background audio noise from the .MOV video , you can achieve it with the De-noise feature. To do that, just double click the audio file in the time to enter the audio editing window. In the pop-up window, click the De-noise option and Filmora will remove the audio noise from the .mov video.

3 Export or save the new files

Click the “Play” button in the right preview window to see the result. If you’re satisfied, hit “Export” and you’ll go to the export window. As you see, this program offers four output ways. In the “Format” tab, you can save the new work in all popular formats such as AVI, MP4, MOV, FLV and much more. You can also convert your video to a YouTube compatible format for online sharing in the “YouTube” tab and immediately upload it. Or burn a DVD disk in minutes to watch it on your home cinema.

Besides removing audio from video, Filmora allows you to edit .MOV videos further, including changing video speed, and some advanced video editing features such as green screen and video stabilization. Check the video tutorial below to check how to edit videos with Filmora.

Shanoon Cox

Shanoon Cox is a writer and a lover of all things video.

Follow @Shanoon Cox

The Contemporary Guide to Achieving Perfect Audio Gradual Decline

Audio fade out, where sound becomes progressively softer until it can no longer be heard, is one of the most popular audio techniques today. This can give the audio track a clean, professional sound. If you want to apply this kind of audio effect, Wondershare Filmora - an easy-to-use program can help you achieve that. Now follow the steps below to learn how to apply the audio fade out effect to your video.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

How To Fade Out Audio in Wondershare Filmora?

1. Import your video/audio to Wondershare Filmora

Install and open Wondershare Filmora . Click the “Import” button to browse and import the video/audio file you want to edit. You can also drag and drop your video/audio file to the program. Wondershare Filmora supports various video and audio formats such as AVI, NSV, FLV, MKV, MP4, M4V, RMVB, TS, TP, TRP, M2TS, APE, CUE, AU, AMR, OGG, and more. You can directly import these kinds of files without conversion.

2. Apply audio fade out effect

Drop your video/audio to the Video/Audio Timeline. If you need to detach the audio file from the video, you can use the Detach audio feature in Filmora to accomplish it easily.

Find the “Fade Out” option from the context menu. Double click on the target file and switch to the “Audio” column. Then drag the slider bar until the audio is faded to your liking. Then you can manually set the fade out the length by dragging the slider bar to the right or left. If you make a mistake or want to change the length, click the “Reset” button. Then click the “Play” button to play the newly faded audio track.

3. Save the newly faded file

You can specify the output format, output name, and output folder. If you want to specify the detailed parameters, click the triangle beside the “Advanced settings” option and make changes by clicking the drop-down list. If you’re satisfied with the result, click the “Export” button, and then an output window will pop up.

If you want to play the new file on mobile devices such as iPhone, iPad, iPod, Zune, go to the “Device” tab and choose a specific device from the list. You can also directly share the file to YouTube and Facebook in the “YouTube” tab or burn it to DVD in the “DVD” tab.

Audio fading out is a simple task with Wondershare Filmora. With this powerful video editing tool, you can also combine video/audio, split video, rotate video, add the image to mp3, remove audio from video, and more. Now download and explore more possibilities for your digital world.

Related Tips: How to Edit the Audio Track of Your Video

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

How To Fade Out Audio in Wondershare Filmora?

1. Import your video/audio to Wondershare Filmora

Install and open Wondershare Filmora . Click the “Import” button to browse and import the video/audio file you want to edit. You can also drag and drop your video/audio file to the program. Wondershare Filmora supports various video and audio formats such as AVI, NSV, FLV, MKV, MP4, M4V, RMVB, TS, TP, TRP, M2TS, APE, CUE, AU, AMR, OGG, and more. You can directly import these kinds of files without conversion.

2. Apply audio fade out effect

Drop your video/audio to the Video/Audio Timeline. If you need to detach the audio file from the video, you can use the Detach audio feature in Filmora to accomplish it easily.

Find the “Fade Out” option from the context menu. Double click on the target file and switch to the “Audio” column. Then drag the slider bar until the audio is faded to your liking. Then you can manually set the fade out the length by dragging the slider bar to the right or left. If you make a mistake or want to change the length, click the “Reset” button. Then click the “Play” button to play the newly faded audio track.

3. Save the newly faded file

You can specify the output format, output name, and output folder. If you want to specify the detailed parameters, click the triangle beside the “Advanced settings” option and make changes by clicking the drop-down list. If you’re satisfied with the result, click the “Export” button, and then an output window will pop up.

If you want to play the new file on mobile devices such as iPhone, iPad, iPod, Zune, go to the “Device” tab and choose a specific device from the list. You can also directly share the file to YouTube and Facebook in the “YouTube” tab or burn it to DVD in the “DVD” tab.

Audio fading out is a simple task with Wondershare Filmora. With this powerful video editing tool, you can also combine video/audio, split video, rotate video, add the image to mp3, remove audio from video, and more. Now download and explore more possibilities for your digital world.

Related Tips: How to Edit the Audio Track of Your Video

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

How To Fade Out Audio in Wondershare Filmora?

1. Import your video/audio to Wondershare Filmora

Install and open Wondershare Filmora . Click the “Import” button to browse and import the video/audio file you want to edit. You can also drag and drop your video/audio file to the program. Wondershare Filmora supports various video and audio formats such as AVI, NSV, FLV, MKV, MP4, M4V, RMVB, TS, TP, TRP, M2TS, APE, CUE, AU, AMR, OGG, and more. You can directly import these kinds of files without conversion.

2. Apply audio fade out effect

Drop your video/audio to the Video/Audio Timeline. If you need to detach the audio file from the video, you can use the Detach audio feature in Filmora to accomplish it easily.

Find the “Fade Out” option from the context menu. Double click on the target file and switch to the “Audio” column. Then drag the slider bar until the audio is faded to your liking. Then you can manually set the fade out the length by dragging the slider bar to the right or left. If you make a mistake or want to change the length, click the “Reset” button. Then click the “Play” button to play the newly faded audio track.

3. Save the newly faded file

You can specify the output format, output name, and output folder. If you want to specify the detailed parameters, click the triangle beside the “Advanced settings” option and make changes by clicking the drop-down list. If you’re satisfied with the result, click the “Export” button, and then an output window will pop up.

If you want to play the new file on mobile devices such as iPhone, iPad, iPod, Zune, go to the “Device” tab and choose a specific device from the list. You can also directly share the file to YouTube and Facebook in the “YouTube” tab or burn it to DVD in the “DVD” tab.

Audio fading out is a simple task with Wondershare Filmora. With this powerful video editing tool, you can also combine video/audio, split video, rotate video, add the image to mp3, remove audio from video, and more. Now download and explore more possibilities for your digital world.

Related Tips: How to Edit the Audio Track of Your Video

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

How To Fade Out Audio in Wondershare Filmora?

1. Import your video/audio to Wondershare Filmora

Install and open Wondershare Filmora . Click the “Import” button to browse and import the video/audio file you want to edit. You can also drag and drop your video/audio file to the program. Wondershare Filmora supports various video and audio formats such as AVI, NSV, FLV, MKV, MP4, M4V, RMVB, TS, TP, TRP, M2TS, APE, CUE, AU, AMR, OGG, and more. You can directly import these kinds of files without conversion.

2. Apply audio fade out effect

Drop your video/audio to the Video/Audio Timeline. If you need to detach the audio file from the video, you can use the Detach audio feature in Filmora to accomplish it easily.

Find the “Fade Out” option from the context menu. Double click on the target file and switch to the “Audio” column. Then drag the slider bar until the audio is faded to your liking. Then you can manually set the fade out the length by dragging the slider bar to the right or left. If you make a mistake or want to change the length, click the “Reset” button. Then click the “Play” button to play the newly faded audio track.

3. Save the newly faded file

You can specify the output format, output name, and output folder. If you want to specify the detailed parameters, click the triangle beside the “Advanced settings” option and make changes by clicking the drop-down list. If you’re satisfied with the result, click the “Export” button, and then an output window will pop up.

If you want to play the new file on mobile devices such as iPhone, iPad, iPod, Zune, go to the “Device” tab and choose a specific device from the list. You can also directly share the file to YouTube and Facebook in the “YouTube” tab or burn it to DVD in the “DVD” tab.

Audio fading out is a simple task with Wondershare Filmora. With this powerful video editing tool, you can also combine video/audio, split video, rotate video, add the image to mp3, remove audio from video, and more. Now download and explore more possibilities for your digital world.

Related Tips: How to Edit the Audio Track of Your Video

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor

Numerous effects to choose from

Detailed tutorials provided by the official channel

Try It Free Try It Free

“The Ultimate Guide to REAPER: Functionality, Analysis, and Teaching Resources”

DAW stands for Digital Audio Workstation. It is where you can record, edit, mix or even master your music. You always need good DAW software to help you with the job to produce music or live recording musicians.

A good DAW software must have a multi-track audio recording , virtual instruments, MIDI sequencer, excellent mixing capabilities, and plug-in processor hosting. The software is found for all major operating systems such as Linux , Windows, and Mac. If you want to learn more about DAW, then stay with us. The article will discuss in detail REAPER Recording Software.

In this article

01 What Is REAPER Recording Software?

02 How to Download and Install REAPER Software?

03 Tutorial for Using REAPER Recording Software

Part 1. What Is REAPER Recording Software?

Recording software like REAPER records computer audio is used to produce music, edit it, transform, and customize your music. With REAPER Recording Software , you can record multi-layer audio and MIDI in various formats. REAPER has the easiest interface that allows you to drag and drop to import, split, move and do many other tasks.

This is just one feature of REAPER that sounds very interesting. In this section, we will talk about more of its features.

1. Record and Edit

You can easily record the audio and (MIDI) Musical Instrumental Digital Interface with REAPER recording software. It lets you edit and customize everything. You can record and edit things limitlessly. When it comes to recording, it’s not at all difficult for REAPER software to record various instruments or vocals.

2. Mixing

Initially, the mixer might seem inflexible, but in reality, REAPER has a lot to offer you. It has great automated capabilities for instrument and effect parameters. It doesn’t matter if you are working because you can still bounce or freeze tracks while working.

The mixer is very flexible. With REAPERs mixer, you just have to drag and drop your recordings so that you can create tracks, and also, you can customize the arrangements by moving the portions.

3. Interface

While looking at the interface, you might question yourself about how to use its interface. Some people love to learn about new things, such as the REAPER Recording Software. Whereas, some people seem least interested because the half-empty interface is not intuitive to them.

Whereas, the best thing about its interface is that you can customize it. REAPER allows you to add different wallpapers and layouts to your software interface.

4. Strong Stability

REAPER Recording Software has very strong stability. This is one of its strongest features as compared to other competitors. The RAM is rarely affected by the load time and the used resources. Moreover, the software offers a wide range of languages. You can select your desired language to run the software.

Part 2. How to Download and Install REAPER Software?

REAPER is a Digital Audio Workstation. The perfect platform where you can manipulate and transform your audio. With REAPER Record Computer audio, you can work efficiently in a resource-friendly studio with saving your time. Stay tuned if you plan to learn more about its pricing and requirements.

Pricing of REAPER Software

A reaper is a brilliant software. It has a 60-day trial period. REAPER costs $60 in total to register. It has complete MIDI sequencing. You can also get a discounted license if REAPER is the best private option for you or has commercial usage. You can set the equal license key on every computer for someone with multiple computers.

System Requirements

The recording software has uncountable features. REAPER software facilitates its users at every level by giving the best audio manipulating platform. The best thing about REAPER Recording Software is its compatibility with different operating systems. Let us add more to your knowledge on this.

Windows

REAPER software is available for Windows 7, 8, 10, XP, and Vista. The version of REAPER for Windows is 6.42. This is for Windows 64-bit whereas, a download package is also available for Windows 32-bit.

macOS

For macOS 64-bit, REAPER has a 6.42 version. This version is compatible with macOS 10.5 – 10.14. Whereas, for macOS 10.15+, the available version of REAPER is 6.42 with a 15MB file size.

Linux

REAPER Recording Software is also compatible with Linux x86_64. The REAPER version is 6.42 with an 11 MB file size. This version can also work on AMD64 64-bit.

Downloading and Installing REAPER

Now that REAPER Record Computer Audio has impressed you a lot. You must be thinking about how to download it. If this is on your mind, then we got you. Allow us to share its steps that will guide you to download the software easily.

Step 1: To install REAPER software, first of all, visit its official website. Then locate and head over to its download section.

Step 2: Click on ‘Download REAPER from the download section.’ For Windows users, they can download the Windows installation package. At the same time, Linux and macOS users can select their installation packages.

Step 3: Lastly, after you have downloaded your systems compatible installation package, you simply have to run it and then install it according to your respective operating system.

Part 3. Tutorial for Using REAPER Recording Software

After its attractive features and detailed downloading procedure, it is finally the time to talk about its works. This section of the article will explain to you more about REAPER Recording Software as we are now going to present a tutorial on how to use the software.

Understand the Layout

Understanding and knowing the layout of your software before you start working on it is essential. The crucial components of REAPER software include the Timeline, Arrangement Window, Track Panel, Toolbar, and lastly, Transport.

The Arrangement window holds all the added items. The items are played from left to right order, similar to their timeline arrangement. You can also zoom in and out. Then comes the transport toolbar, which holds the functions to stop, rewind, play, fast forward, adjust the timeline speed, etc. The toolbar holds all the toggle buttons. You can also customize your toolbar.

New Track Creation

For creating a new track on REAPER, go to the Track menu and hit Insert New Track. A track is like another layer to your audio. Multiple layers and tracks make your work complex yet interesting as you can play all the different tracks at the same time. By double-clicking in the Track Control Panel, you can set a name for the added track.

Audio Hardware Settings for Audio Recording

It is best suggested always to check your audio hardware settings before you start to record, edit or mix with REAPER Recording Software. Your primary focus should be on the recording device’s devices should be set as Input Device, whereas the listening device should be set as the Output Device.

For this, you have to select Preferences from the Options menu. A window will appear in front of you, the REAPER Preference window. You have to select the correct Input and Output devices from the dropdown menu from this window.

Arm your Track

Arming your track is very important. For this, head over to the Track Control Panel, and next to your track name, hit the red circle. If you have various tracks, you should solo this track and mute the other tracks.

As soon as the track is armed, a Gain Meter will activate on the side. From this, you can check if you have properly set the microphone or not. This could be tested by tapping on the microphone.

Record

After all, the hardware settings are done, and your track is armed, it’s time to start the recording. For that, just tap on the Record button in the Transport toolbar. A yellow line in the timeline will indicate the end of the recording.

To end the recording, tap on the Stop button from the Transport Toolbar. Lastly, REAPER Recording Software will ask you to save the file. In case you don’t want it, you can also delete it.

Create and Manipulate Clips

Things like manipulation get a lot easier if you split the clips in REAPER. From the items menu, you have to select the option of Split Item on Cursor. This divides your clip into two clips on each side of the cursor. You can also remove the clips by going to the Items Menu. From there, you just have to hit the Remove Item option, or else, simply press the Delete key on your keyboard.

Removing clips will create a gap in the arrangement window that can be filled by dragging forward the remaining clip.

Volume Adjustments – Normalize

By double-clicking on the item or by selecting ‘Item Properties’ from a right-click, you can normalize the item. A new window will appear as Media Item Properties, from where you have to locate the Volume Settings and then select the option of Normalize.

If your item is already loud, then nothing will happen, but if it is not, then the slider will change from 0.00 dB showing an increase in the volume. Lastly, hit the ‘Apply’ or ‘OK’ button to imply the changes.

Fade in/out

With the Media Properties, you can also adjust a Fade in and a Fade out. For this, you simply have to set an end time for the Fade in, whereas a start time is entered for Fade out. Hit the ‘Ok’ or ‘Apply’ button to apply the changes.

From the Arrangement window, fades can be adjusted. For adjusting the fades, hover with your mouse over the red line. You will see a newly shaped cursor. Just drag on the timeline to play and adjust the Fade with this new cursor.

Automate Changes

With REAPER, you can also automate changes in track parameters. We will guide about automation from Track Envelopes. From Track Control Panel, hit the Trim option. A new Envelopes window will open at this point from where you have to check the Volume box.

A new Volume Track will open up. Here, you have to set new Envelope points. That could be done by holding the shift key, right-clicking on the point, and then selecting Create New Point. A green circle will indicate the new point.

By dragging the Envelope point, you can also adjust the volume. Dragging it towards the top will increase the volume, whereas dragging it towards the bottom will eventually decrease.

Finalize the Audio – Render

After all the above steps have been completed to set the order and adjust your desired volume, the last step comes to render your project file. For that, move to the File menu and select the ‘Render’ option. A window will be opened as ‘Render to File.’ Now, from the dropdown menu, select your desired Output Format.

Lastly, hit the Render 1 File button, and then REAPER will export your project. You can immediately listen to it by selecting the ‘Launch File’ option.

Concluding Thoughts

This article is everything you need to learn about REAPER Recording Software. The article that started from an introduction on DAW took you on a roller coaster ride. Everything about REAPER software has been shared.

We hope that this article helps you in all possible ways. The attractive features impress you, and its pricing and system specifications increase your knowledge. Along with that, the shared tutorial will guide you thoroughly on how to use it.

02 How to Download and Install REAPER Software?

03 Tutorial for Using REAPER Recording Software

Part 1. What Is REAPER Recording Software?

Recording software like REAPER records computer audio is used to produce music, edit it, transform, and customize your music. With REAPER Recording Software , you can record multi-layer audio and MIDI in various formats. REAPER has the easiest interface that allows you to drag and drop to import, split, move and do many other tasks.

This is just one feature of REAPER that sounds very interesting. In this section, we will talk about more of its features.

1. Record and Edit

You can easily record the audio and (MIDI) Musical Instrumental Digital Interface with REAPER recording software. It lets you edit and customize everything. You can record and edit things limitlessly. When it comes to recording, it’s not at all difficult for REAPER software to record various instruments or vocals.

2. Mixing

Initially, the mixer might seem inflexible, but in reality, REAPER has a lot to offer you. It has great automated capabilities for instrument and effect parameters. It doesn’t matter if you are working because you can still bounce or freeze tracks while working.

The mixer is very flexible. With REAPERs mixer, you just have to drag and drop your recordings so that you can create tracks, and also, you can customize the arrangements by moving the portions.

3. Interface

While looking at the interface, you might question yourself about how to use its interface. Some people love to learn about new things, such as the REAPER Recording Software. Whereas, some people seem least interested because the half-empty interface is not intuitive to them.

Whereas, the best thing about its interface is that you can customize it. REAPER allows you to add different wallpapers and layouts to your software interface.

4. Strong Stability

REAPER Recording Software has very strong stability. This is one of its strongest features as compared to other competitors. The RAM is rarely affected by the load time and the used resources. Moreover, the software offers a wide range of languages. You can select your desired language to run the software.

Part 2. How to Download and Install REAPER Software?

REAPER is a Digital Audio Workstation. The perfect platform where you can manipulate and transform your audio. With REAPER Record Computer audio, you can work efficiently in a resource-friendly studio with saving your time. Stay tuned if you plan to learn more about its pricing and requirements.

Pricing of REAPER Software

A reaper is a brilliant software. It has a 60-day trial period. REAPER costs $60 in total to register. It has complete MIDI sequencing. You can also get a discounted license if REAPER is the best private option for you or has commercial usage. You can set the equal license key on every computer for someone with multiple computers.

System Requirements

The recording software has uncountable features. REAPER software facilitates its users at every level by giving the best audio manipulating platform. The best thing about REAPER Recording Software is its compatibility with different operating systems. Let us add more to your knowledge on this.

Windows

REAPER software is available for Windows 7, 8, 10, XP, and Vista. The version of REAPER for Windows is 6.42. This is for Windows 64-bit whereas, a download package is also available for Windows 32-bit.

macOS

For macOS 64-bit, REAPER has a 6.42 version. This version is compatible with macOS 10.5 – 10.14. Whereas, for macOS 10.15+, the available version of REAPER is 6.42 with a 15MB file size.

Linux

REAPER Recording Software is also compatible with Linux x86_64. The REAPER version is 6.42 with an 11 MB file size. This version can also work on AMD64 64-bit.

Downloading and Installing REAPER

Now that REAPER Record Computer Audio has impressed you a lot. You must be thinking about how to download it. If this is on your mind, then we got you. Allow us to share its steps that will guide you to download the software easily.

Step 1: To install REAPER software, first of all, visit its official website. Then locate and head over to its download section.

Step 2: Click on ‘Download REAPER from the download section.’ For Windows users, they can download the Windows installation package. At the same time, Linux and macOS users can select their installation packages.

Step 3: Lastly, after you have downloaded your systems compatible installation package, you simply have to run it and then install it according to your respective operating system.

Part 3. Tutorial for Using REAPER Recording Software

After its attractive features and detailed downloading procedure, it is finally the time to talk about its works. This section of the article will explain to you more about REAPER Recording Software as we are now going to present a tutorial on how to use the software.

Understand the Layout

Understanding and knowing the layout of your software before you start working on it is essential. The crucial components of REAPER software include the Timeline, Arrangement Window, Track Panel, Toolbar, and lastly, Transport.

The Arrangement window holds all the added items. The items are played from left to right order, similar to their timeline arrangement. You can also zoom in and out. Then comes the transport toolbar, which holds the functions to stop, rewind, play, fast forward, adjust the timeline speed, etc. The toolbar holds all the toggle buttons. You can also customize your toolbar.

New Track Creation

For creating a new track on REAPER, go to the Track menu and hit Insert New Track. A track is like another layer to your audio. Multiple layers and tracks make your work complex yet interesting as you can play all the different tracks at the same time. By double-clicking in the Track Control Panel, you can set a name for the added track.

Audio Hardware Settings for Audio Recording

It is best suggested always to check your audio hardware settings before you start to record, edit or mix with REAPER Recording Software. Your primary focus should be on the recording device’s devices should be set as Input Device, whereas the listening device should be set as the Output Device.

For this, you have to select Preferences from the Options menu. A window will appear in front of you, the REAPER Preference window. You have to select the correct Input and Output devices from the dropdown menu from this window.

Arm your Track

Arming your track is very important. For this, head over to the Track Control Panel, and next to your track name, hit the red circle. If you have various tracks, you should solo this track and mute the other tracks.

As soon as the track is armed, a Gain Meter will activate on the side. From this, you can check if you have properly set the microphone or not. This could be tested by tapping on the microphone.

Record

After all, the hardware settings are done, and your track is armed, it’s time to start the recording. For that, just tap on the Record button in the Transport toolbar. A yellow line in the timeline will indicate the end of the recording.

To end the recording, tap on the Stop button from the Transport Toolbar. Lastly, REAPER Recording Software will ask you to save the file. In case you don’t want it, you can also delete it.

Create and Manipulate Clips

Things like manipulation get a lot easier if you split the clips in REAPER. From the items menu, you have to select the option of Split Item on Cursor. This divides your clip into two clips on each side of the cursor. You can also remove the clips by going to the Items Menu. From there, you just have to hit the Remove Item option, or else, simply press the Delete key on your keyboard.

Removing clips will create a gap in the arrangement window that can be filled by dragging forward the remaining clip.

Volume Adjustments – Normalize

By double-clicking on the item or by selecting ‘Item Properties’ from a right-click, you can normalize the item. A new window will appear as Media Item Properties, from where you have to locate the Volume Settings and then select the option of Normalize.

If your item is already loud, then nothing will happen, but if it is not, then the slider will change from 0.00 dB showing an increase in the volume. Lastly, hit the ‘Apply’ or ‘OK’ button to imply the changes.

Fade in/out

With the Media Properties, you can also adjust a Fade in and a Fade out. For this, you simply have to set an end time for the Fade in, whereas a start time is entered for Fade out. Hit the ‘Ok’ or ‘Apply’ button to apply the changes.

From the Arrangement window, fades can be adjusted. For adjusting the fades, hover with your mouse over the red line. You will see a newly shaped cursor. Just drag on the timeline to play and adjust the Fade with this new cursor.

Automate Changes

With REAPER, you can also automate changes in track parameters. We will guide about automation from Track Envelopes. From Track Control Panel, hit the Trim option. A new Envelopes window will open at this point from where you have to check the Volume box.

A new Volume Track will open up. Here, you have to set new Envelope points. That could be done by holding the shift key, right-clicking on the point, and then selecting Create New Point. A green circle will indicate the new point.

By dragging the Envelope point, you can also adjust the volume. Dragging it towards the top will increase the volume, whereas dragging it towards the bottom will eventually decrease.

Finalize the Audio – Render

After all the above steps have been completed to set the order and adjust your desired volume, the last step comes to render your project file. For that, move to the File menu and select the ‘Render’ option. A window will be opened as ‘Render to File.’ Now, from the dropdown menu, select your desired Output Format.

Lastly, hit the Render 1 File button, and then REAPER will export your project. You can immediately listen to it by selecting the ‘Launch File’ option.

Concluding Thoughts

This article is everything you need to learn about REAPER Recording Software. The article that started from an introduction on DAW took you on a roller coaster ride. Everything about REAPER software has been shared.

We hope that this article helps you in all possible ways. The attractive features impress you, and its pricing and system specifications increase your knowledge. Along with that, the shared tutorial will guide you thoroughly on how to use it.

02 How to Download and Install REAPER Software?

03 Tutorial for Using REAPER Recording Software

Part 1. What Is REAPER Recording Software?

Recording software like REAPER records computer audio is used to produce music, edit it, transform, and customize your music. With REAPER Recording Software , you can record multi-layer audio and MIDI in various formats. REAPER has the easiest interface that allows you to drag and drop to import, split, move and do many other tasks.

This is just one feature of REAPER that sounds very interesting. In this section, we will talk about more of its features.

1. Record and Edit

You can easily record the audio and (MIDI) Musical Instrumental Digital Interface with REAPER recording software. It lets you edit and customize everything. You can record and edit things limitlessly. When it comes to recording, it’s not at all difficult for REAPER software to record various instruments or vocals.

2. Mixing

Initially, the mixer might seem inflexible, but in reality, REAPER has a lot to offer you. It has great automated capabilities for instrument and effect parameters. It doesn’t matter if you are working because you can still bounce or freeze tracks while working.

The mixer is very flexible. With REAPERs mixer, you just have to drag and drop your recordings so that you can create tracks, and also, you can customize the arrangements by moving the portions.

3. Interface

While looking at the interface, you might question yourself about how to use its interface. Some people love to learn about new things, such as the REAPER Recording Software. Whereas, some people seem least interested because the half-empty interface is not intuitive to them.

Whereas, the best thing about its interface is that you can customize it. REAPER allows you to add different wallpapers and layouts to your software interface.

4. Strong Stability

REAPER Recording Software has very strong stability. This is one of its strongest features as compared to other competitors. The RAM is rarely affected by the load time and the used resources. Moreover, the software offers a wide range of languages. You can select your desired language to run the software.

Part 2. How to Download and Install REAPER Software?

REAPER is a Digital Audio Workstation. The perfect platform where you can manipulate and transform your audio. With REAPER Record Computer audio, you can work efficiently in a resource-friendly studio with saving your time. Stay tuned if you plan to learn more about its pricing and requirements.

Pricing of REAPER Software

A reaper is a brilliant software. It has a 60-day trial period. REAPER costs $60 in total to register. It has complete MIDI sequencing. You can also get a discounted license if REAPER is the best private option for you or has commercial usage. You can set the equal license key on every computer for someone with multiple computers.

System Requirements

The recording software has uncountable features. REAPER software facilitates its users at every level by giving the best audio manipulating platform. The best thing about REAPER Recording Software is its compatibility with different operating systems. Let us add more to your knowledge on this.

Windows

REAPER software is available for Windows 7, 8, 10, XP, and Vista. The version of REAPER for Windows is 6.42. This is for Windows 64-bit whereas, a download package is also available for Windows 32-bit.

macOS

For macOS 64-bit, REAPER has a 6.42 version. This version is compatible with macOS 10.5 – 10.14. Whereas, for macOS 10.15+, the available version of REAPER is 6.42 with a 15MB file size.

Linux

REAPER Recording Software is also compatible with Linux x86_64. The REAPER version is 6.42 with an 11 MB file size. This version can also work on AMD64 64-bit.

Downloading and Installing REAPER

Now that REAPER Record Computer Audio has impressed you a lot. You must be thinking about how to download it. If this is on your mind, then we got you. Allow us to share its steps that will guide you to download the software easily.

Step 1: To install REAPER software, first of all, visit its official website. Then locate and head over to its download section.

Step 2: Click on ‘Download REAPER from the download section.’ For Windows users, they can download the Windows installation package. At the same time, Linux and macOS users can select their installation packages.

Step 3: Lastly, after you have downloaded your systems compatible installation package, you simply have to run it and then install it according to your respective operating system.

Part 3. Tutorial for Using REAPER Recording Software

After its attractive features and detailed downloading procedure, it is finally the time to talk about its works. This section of the article will explain to you more about REAPER Recording Software as we are now going to present a tutorial on how to use the software.

Understand the Layout

Understanding and knowing the layout of your software before you start working on it is essential. The crucial components of REAPER software include the Timeline, Arrangement Window, Track Panel, Toolbar, and lastly, Transport.

The Arrangement window holds all the added items. The items are played from left to right order, similar to their timeline arrangement. You can also zoom in and out. Then comes the transport toolbar, which holds the functions to stop, rewind, play, fast forward, adjust the timeline speed, etc. The toolbar holds all the toggle buttons. You can also customize your toolbar.

New Track Creation

For creating a new track on REAPER, go to the Track menu and hit Insert New Track. A track is like another layer to your audio. Multiple layers and tracks make your work complex yet interesting as you can play all the different tracks at the same time. By double-clicking in the Track Control Panel, you can set a name for the added track.

Audio Hardware Settings for Audio Recording

It is best suggested always to check your audio hardware settings before you start to record, edit or mix with REAPER Recording Software. Your primary focus should be on the recording device’s devices should be set as Input Device, whereas the listening device should be set as the Output Device.

For this, you have to select Preferences from the Options menu. A window will appear in front of you, the REAPER Preference window. You have to select the correct Input and Output devices from the dropdown menu from this window.

Arm your Track

Arming your track is very important. For this, head over to the Track Control Panel, and next to your track name, hit the red circle. If you have various tracks, you should solo this track and mute the other tracks.

As soon as the track is armed, a Gain Meter will activate on the side. From this, you can check if you have properly set the microphone or not. This could be tested by tapping on the microphone.

Record

After all, the hardware settings are done, and your track is armed, it’s time to start the recording. For that, just tap on the Record button in the Transport toolbar. A yellow line in the timeline will indicate the end of the recording.

To end the recording, tap on the Stop button from the Transport Toolbar. Lastly, REAPER Recording Software will ask you to save the file. In case you don’t want it, you can also delete it.

Create and Manipulate Clips

Things like manipulation get a lot easier if you split the clips in REAPER. From the items menu, you have to select the option of Split Item on Cursor. This divides your clip into two clips on each side of the cursor. You can also remove the clips by going to the Items Menu. From there, you just have to hit the Remove Item option, or else, simply press the Delete key on your keyboard.

Removing clips will create a gap in the arrangement window that can be filled by dragging forward the remaining clip.

Volume Adjustments – Normalize

By double-clicking on the item or by selecting ‘Item Properties’ from a right-click, you can normalize the item. A new window will appear as Media Item Properties, from where you have to locate the Volume Settings and then select the option of Normalize.

If your item is already loud, then nothing will happen, but if it is not, then the slider will change from 0.00 dB showing an increase in the volume. Lastly, hit the ‘Apply’ or ‘OK’ button to imply the changes.

Fade in/out

With the Media Properties, you can also adjust a Fade in and a Fade out. For this, you simply have to set an end time for the Fade in, whereas a start time is entered for Fade out. Hit the ‘Ok’ or ‘Apply’ button to apply the changes.

From the Arrangement window, fades can be adjusted. For adjusting the fades, hover with your mouse over the red line. You will see a newly shaped cursor. Just drag on the timeline to play and adjust the Fade with this new cursor.

Automate Changes

With REAPER, you can also automate changes in track parameters. We will guide about automation from Track Envelopes. From Track Control Panel, hit the Trim option. A new Envelopes window will open at this point from where you have to check the Volume box.

A new Volume Track will open up. Here, you have to set new Envelope points. That could be done by holding the shift key, right-clicking on the point, and then selecting Create New Point. A green circle will indicate the new point.

By dragging the Envelope point, you can also adjust the volume. Dragging it towards the top will increase the volume, whereas dragging it towards the bottom will eventually decrease.

Finalize the Audio – Render

After all the above steps have been completed to set the order and adjust your desired volume, the last step comes to render your project file. For that, move to the File menu and select the ‘Render’ option. A window will be opened as ‘Render to File.’ Now, from the dropdown menu, select your desired Output Format.

Lastly, hit the Render 1 File button, and then REAPER will export your project. You can immediately listen to it by selecting the ‘Launch File’ option.

Concluding Thoughts

This article is everything you need to learn about REAPER Recording Software. The article that started from an introduction on DAW took you on a roller coaster ride. Everything about REAPER software has been shared.

We hope that this article helps you in all possible ways. The attractive features impress you, and its pricing and system specifications increase your knowledge. Along with that, the shared tutorial will guide you thoroughly on how to use it.

02 How to Download and Install REAPER Software?

03 Tutorial for Using REAPER Recording Software

Part 1. What Is REAPER Recording Software?

Recording software like REAPER records computer audio is used to produce music, edit it, transform, and customize your music. With REAPER Recording Software , you can record multi-layer audio and MIDI in various formats. REAPER has the easiest interface that allows you to drag and drop to import, split, move and do many other tasks.

This is just one feature of REAPER that sounds very interesting. In this section, we will talk about more of its features.

1. Record and Edit

You can easily record the audio and (MIDI) Musical Instrumental Digital Interface with REAPER recording software. It lets you edit and customize everything. You can record and edit things limitlessly. When it comes to recording, it’s not at all difficult for REAPER software to record various instruments or vocals.

2. Mixing

Initially, the mixer might seem inflexible, but in reality, REAPER has a lot to offer you. It has great automated capabilities for instrument and effect parameters. It doesn’t matter if you are working because you can still bounce or freeze tracks while working.

The mixer is very flexible. With REAPERs mixer, you just have to drag and drop your recordings so that you can create tracks, and also, you can customize the arrangements by moving the portions.

3. Interface

While looking at the interface, you might question yourself about how to use its interface. Some people love to learn about new things, such as the REAPER Recording Software. Whereas, some people seem least interested because the half-empty interface is not intuitive to them.

Whereas, the best thing about its interface is that you can customize it. REAPER allows you to add different wallpapers and layouts to your software interface.

4. Strong Stability

REAPER Recording Software has very strong stability. This is one of its strongest features as compared to other competitors. The RAM is rarely affected by the load time and the used resources. Moreover, the software offers a wide range of languages. You can select your desired language to run the software.

Part 2. How to Download and Install REAPER Software?

REAPER is a Digital Audio Workstation. The perfect platform where you can manipulate and transform your audio. With REAPER Record Computer audio, you can work efficiently in a resource-friendly studio with saving your time. Stay tuned if you plan to learn more about its pricing and requirements.

Pricing of REAPER Software

A reaper is a brilliant software. It has a 60-day trial period. REAPER costs $60 in total to register. It has complete MIDI sequencing. You can also get a discounted license if REAPER is the best private option for you or has commercial usage. You can set the equal license key on every computer for someone with multiple computers.

System Requirements

The recording software has uncountable features. REAPER software facilitates its users at every level by giving the best audio manipulating platform. The best thing about REAPER Recording Software is its compatibility with different operating systems. Let us add more to your knowledge on this.

Windows

REAPER software is available for Windows 7, 8, 10, XP, and Vista. The version of REAPER for Windows is 6.42. This is for Windows 64-bit whereas, a download package is also available for Windows 32-bit.

macOS

For macOS 64-bit, REAPER has a 6.42 version. This version is compatible with macOS 10.5 – 10.14. Whereas, for macOS 10.15+, the available version of REAPER is 6.42 with a 15MB file size.

Linux

REAPER Recording Software is also compatible with Linux x86_64. The REAPER version is 6.42 with an 11 MB file size. This version can also work on AMD64 64-bit.

Downloading and Installing REAPER

Now that REAPER Record Computer Audio has impressed you a lot. You must be thinking about how to download it. If this is on your mind, then we got you. Allow us to share its steps that will guide you to download the software easily.

Step 1: To install REAPER software, first of all, visit its official website. Then locate and head over to its download section.

Step 2: Click on ‘Download REAPER from the download section.’ For Windows users, they can download the Windows installation package. At the same time, Linux and macOS users can select their installation packages.

Step 3: Lastly, after you have downloaded your systems compatible installation package, you simply have to run it and then install it according to your respective operating system.

Part 3. Tutorial for Using REAPER Recording Software

After its attractive features and detailed downloading procedure, it is finally the time to talk about its works. This section of the article will explain to you more about REAPER Recording Software as we are now going to present a tutorial on how to use the software.

Understand the Layout

Understanding and knowing the layout of your software before you start working on it is essential. The crucial components of REAPER software include the Timeline, Arrangement Window, Track Panel, Toolbar, and lastly, Transport.

The Arrangement window holds all the added items. The items are played from left to right order, similar to their timeline arrangement. You can also zoom in and out. Then comes the transport toolbar, which holds the functions to stop, rewind, play, fast forward, adjust the timeline speed, etc. The toolbar holds all the toggle buttons. You can also customize your toolbar.

New Track Creation

For creating a new track on REAPER, go to the Track menu and hit Insert New Track. A track is like another layer to your audio. Multiple layers and tracks make your work complex yet interesting as you can play all the different tracks at the same time. By double-clicking in the Track Control Panel, you can set a name for the added track.

Audio Hardware Settings for Audio Recording

It is best suggested always to check your audio hardware settings before you start to record, edit or mix with REAPER Recording Software. Your primary focus should be on the recording device’s devices should be set as Input Device, whereas the listening device should be set as the Output Device.

For this, you have to select Preferences from the Options menu. A window will appear in front of you, the REAPER Preference window. You have to select the correct Input and Output devices from the dropdown menu from this window.

Arm your Track

Arming your track is very important. For this, head over to the Track Control Panel, and next to your track name, hit the red circle. If you have various tracks, you should solo this track and mute the other tracks.

As soon as the track is armed, a Gain Meter will activate on the side. From this, you can check if you have properly set the microphone or not. This could be tested by tapping on the microphone.

Record

After all, the hardware settings are done, and your track is armed, it’s time to start the recording. For that, just tap on the Record button in the Transport toolbar. A yellow line in the timeline will indicate the end of the recording.

To end the recording, tap on the Stop button from the Transport Toolbar. Lastly, REAPER Recording Software will ask you to save the file. In case you don’t want it, you can also delete it.

Create and Manipulate Clips

Things like manipulation get a lot easier if you split the clips in REAPER. From the items menu, you have to select the option of Split Item on Cursor. This divides your clip into two clips on each side of the cursor. You can also remove the clips by going to the Items Menu. From there, you just have to hit the Remove Item option, or else, simply press the Delete key on your keyboard.

Removing clips will create a gap in the arrangement window that can be filled by dragging forward the remaining clip.

Volume Adjustments – Normalize

By double-clicking on the item or by selecting ‘Item Properties’ from a right-click, you can normalize the item. A new window will appear as Media Item Properties, from where you have to locate the Volume Settings and then select the option of Normalize.

If your item is already loud, then nothing will happen, but if it is not, then the slider will change from 0.00 dB showing an increase in the volume. Lastly, hit the ‘Apply’ or ‘OK’ button to imply the changes.

Fade in/out

With the Media Properties, you can also adjust a Fade in and a Fade out. For this, you simply have to set an end time for the Fade in, whereas a start time is entered for Fade out. Hit the ‘Ok’ or ‘Apply’ button to apply the changes.

From the Arrangement window, fades can be adjusted. For adjusting the fades, hover with your mouse over the red line. You will see a newly shaped cursor. Just drag on the timeline to play and adjust the Fade with this new cursor.

Automate Changes

With REAPER, you can also automate changes in track parameters. We will guide about automation from Track Envelopes. From Track Control Panel, hit the Trim option. A new Envelopes window will open at this point from where you have to check the Volume box.

A new Volume Track will open up. Here, you have to set new Envelope points. That could be done by holding the shift key, right-clicking on the point, and then selecting Create New Point. A green circle will indicate the new point.

By dragging the Envelope point, you can also adjust the volume. Dragging it towards the top will increase the volume, whereas dragging it towards the bottom will eventually decrease.

Finalize the Audio – Render

After all the above steps have been completed to set the order and adjust your desired volume, the last step comes to render your project file. For that, move to the File menu and select the ‘Render’ option. A window will be opened as ‘Render to File.’ Now, from the dropdown menu, select your desired Output Format.

Lastly, hit the Render 1 File button, and then REAPER will export your project. You can immediately listen to it by selecting the ‘Launch File’ option.

Concluding Thoughts

This article is everything you need to learn about REAPER Recording Software. The article that started from an introduction on DAW took you on a roller coaster ride. Everything about REAPER software has been shared.

We hope that this article helps you in all possible ways. The attractive features impress you, and its pricing and system specifications increase your knowledge. Along with that, the shared tutorial will guide you thoroughly on how to use it.

Also read: