Fine-Tuning Audacity’s Decibel Settings for Perfect Balance

Audacity is a free, open access, cross-platform sound editing and recording tool. It is compatible with Windows, Mac OS X, Linux, and various other operating systems. All of these aspects have contributed to Audacity’s worldwide popularity. Audacity features an amplified effect that alters the loudness of your chosen audio and other practical tools that can change the sound in different ways.

As a result, Audacity can not only assist you in modifying the level of an audio file, but it can also help you equalize, reduce, normalize, and so on.

Yes, you have heard it right, Audacity increase volume, but the primary question is how? But don’t worry, you will get the answer after reading the article. This article will explain how you can increase or decrease the volume of a whole and a specific segment of the audio file. Let’s get started.

In this article

01 How to Increase or Decrease Volume Without Distortion and Clipping in Audacity

02 How to Increase Volume of Multiple Files in Audacity?

03 How to Increase Volume in Certain Parts of Track?

04 What’s the Difference between Normalize and Amplify?

Part 1: How to Increase or Decrease Volume Without Distortion and Clipping in Audacity

Audio clipping occurs when the audio input becomes too loud for an amplifier to produce, and the surplus signal creates distortion. When editing, you cannot add additional volume to your audio clip forever because this would result in clipping. In this case, you can use the Audacity application to emphasize your material by turning the volume up or down without distortion and clipping on a track or recording.

Learn how Audacity increase volume without distortion by following the procedure described below:

Step 1: First, download and install the Audacity software on your computer.

Step 2: Select the File from the menu above and click Open to open the audio file.

Step 3: Choose the audio track, go to the Effect menu and pick the Amplify option from the drop-down menu.

Note: You can increase or decrease the volume by double-clicking the track and using the slider under the Gain title.

Step 4: Increase or decrease the volume by sliding the slider or typing the amplification value in the text box next to it in the Amplify window as needed.

Note: Ensure that the Allow Clipping checkbox remains unchecked to avoid clipping. Moreover, keep in mind that increasing the volume to a greater extent can result in distortion.

Related: How to Change Audio Volume in Filmora

Part 2: How to Increase Volume of Multiple Files in Audacity?

Audacity is an open-source audio editing tool. It is used for various purposes, like audio recording, music creation, and audio file editing. It also allows you to increase and decrease the volume of audio files.

You may also apply the modifications to multiple files at once, rather than one at a time. Check out the instructions below to learn how to change the volume of multiple audio files:

Step 1: Select the Import option from the File menu, and then pick the Audio option. Browse to your audio files, choose all of them, and then click the Open option.

Step 2: To select all the files, press Ctrl + A, click on the Effect option in the menu bar and pick Amplify.

Step 3: Now, either enter the value in the text box next to the Amplification Decibels tab or use the slider under it. To verify the operation of increasing the volume, check the allow clipping checkbox. When you’re through with the options, click the Ok button.

Step 4: Amplification will be applied to all the tracks. Go to the File option from the above menu to export the files and then select the Export option.

If you’re running Audacity on macOS computer, you can watch the video tutorial below to apply effects to multiple files.

Part 3: How to Increase Volume in Certain Parts of Track?

The audacity software also allows you to alter a specific section of an audio file. The selection tool can assist in locating a particular area of the track. After you’ve chosen a section of the audio file, you may utilize the amplification effect to increase its loudness. Check out the instructions below to learn how you can achieve it:

Step 1: Launch the Audacity software on the computer. To open the audio file, go to the File menu and select Open. You may also open the file by dragging it.

Step 2: Ensure that the Selection tool is active now. Click and hold the mouse left-click to move from one spot on the track to another.

Step 3: After picking the part, go to the Effect option from the menu and select Amplify.

Step 4: Now, for that specific region, modify the amplification and click OK. This will only change the volume for the area you have selected.

Part 4: What’s the Difference between Normalize and Amplify?

Amplify and Normalize are two essential features of the Audacity tool. Many people think they are the same thing, they are right up to some extent, but there exists a big difference between both the features. Before discussing the differences, you need to know what the terms Normalize and Amplify imply.

Amplify

It is the quickest approach to comprehend the effect’s name if you want to know precisely what impacts are. The frequency of the vibration is enhanced to increase the amplification effect. As previously said, it raises a tiny sound.

Furthermore, because this amplification is extended to all frequencies and amplitude, the noise increases. If you choose ten sources and magnify them by ten decibels, each source will be ten decibels louder than your present sound.

Normalize

The meaning of normalizing is standardized, which is also a feature of its name. Whenever you pick an audio input and use the normalize feature, the level is adjusted automatically according to the previously indicated average volume size in Oda City.

As a result, when one sound source is normalized, there is no discernible difference between it and the amplification mechanism. Still, the effect is evident when several sound sources are performed concurrently.

By pressing Ctrl + A and selecting all ten various audio sources, you may compute the required standard of every sound source, enhance the audio input that is smaller than the normal, and create the audio signal more significant than the standard. Shrink the size of each noise source, such as the name, and normalize the sound.

Related: Best Audio Normalizers for Windows

Differences

To differentiate the meaning and impact precisely, amplification means increasing or reducing the sound, whereas normalizing means equalizing the sound. Simply defined, if you magnify ten sources by ten decibels, each of the shorter and louder noises equals ten decibels in their actual loudness.

When the ten sources are normalized, the louder sounds grow louder, conforming to the standard sound source size. Because the amplifying is done regardless, the little noises are going insane during this procedure.

Conclusion

All in all, Audacity does an excellent job at audio editing. If you simply need to modify an audio file, Audacity is a great option. For increasing and decreasing the volume of single and multiple audio files, Audacity is still one of the best bets in the market. We hope that now know how Audacity increase volume of the audio files after reading this article.

02 How to Increase Volume of Multiple Files in Audacity?

03 How to Increase Volume in Certain Parts of Track?

04 What’s the Difference between Normalize and Amplify?

Part 1: How to Increase or Decrease Volume Without Distortion and Clipping in Audacity

Audio clipping occurs when the audio input becomes too loud for an amplifier to produce, and the surplus signal creates distortion. When editing, you cannot add additional volume to your audio clip forever because this would result in clipping. In this case, you can use the Audacity application to emphasize your material by turning the volume up or down without distortion and clipping on a track or recording.

Learn how Audacity increase volume without distortion by following the procedure described below:

Step 1: First, download and install the Audacity software on your computer.

Step 2: Select the File from the menu above and click Open to open the audio file.

Step 3: Choose the audio track, go to the Effect menu and pick the Amplify option from the drop-down menu.

Note: You can increase or decrease the volume by double-clicking the track and using the slider under the Gain title.

Step 4: Increase or decrease the volume by sliding the slider or typing the amplification value in the text box next to it in the Amplify window as needed.

Note: Ensure that the Allow Clipping checkbox remains unchecked to avoid clipping. Moreover, keep in mind that increasing the volume to a greater extent can result in distortion.

Related: How to Change Audio Volume in Filmora

Part 2: How to Increase Volume of Multiple Files in Audacity?

Audacity is an open-source audio editing tool. It is used for various purposes, like audio recording, music creation, and audio file editing. It also allows you to increase and decrease the volume of audio files.

You may also apply the modifications to multiple files at once, rather than one at a time. Check out the instructions below to learn how to change the volume of multiple audio files:

Step 1: Select the Import option from the File menu, and then pick the Audio option. Browse to your audio files, choose all of them, and then click the Open option.

Step 2: To select all the files, press Ctrl + A, click on the Effect option in the menu bar and pick Amplify.

Step 3: Now, either enter the value in the text box next to the Amplification Decibels tab or use the slider under it. To verify the operation of increasing the volume, check the allow clipping checkbox. When you’re through with the options, click the Ok button.

Step 4: Amplification will be applied to all the tracks. Go to the File option from the above menu to export the files and then select the Export option.

If you’re running Audacity on macOS computer, you can watch the video tutorial below to apply effects to multiple files.

Part 3: How to Increase Volume in Certain Parts of Track?

The audacity software also allows you to alter a specific section of an audio file. The selection tool can assist in locating a particular area of the track. After you’ve chosen a section of the audio file, you may utilize the amplification effect to increase its loudness. Check out the instructions below to learn how you can achieve it:

Step 1: Launch the Audacity software on the computer. To open the audio file, go to the File menu and select Open. You may also open the file by dragging it.

Step 2: Ensure that the Selection tool is active now. Click and hold the mouse left-click to move from one spot on the track to another.

Step 3: After picking the part, go to the Effect option from the menu and select Amplify.

Step 4: Now, for that specific region, modify the amplification and click OK. This will only change the volume for the area you have selected.

Part 4: What’s the Difference between Normalize and Amplify?

Amplify and Normalize are two essential features of the Audacity tool. Many people think they are the same thing, they are right up to some extent, but there exists a big difference between both the features. Before discussing the differences, you need to know what the terms Normalize and Amplify imply.

Amplify

It is the quickest approach to comprehend the effect’s name if you want to know precisely what impacts are. The frequency of the vibration is enhanced to increase the amplification effect. As previously said, it raises a tiny sound.

Furthermore, because this amplification is extended to all frequencies and amplitude, the noise increases. If you choose ten sources and magnify them by ten decibels, each source will be ten decibels louder than your present sound.

Normalize

The meaning of normalizing is standardized, which is also a feature of its name. Whenever you pick an audio input and use the normalize feature, the level is adjusted automatically according to the previously indicated average volume size in Oda City.

As a result, when one sound source is normalized, there is no discernible difference between it and the amplification mechanism. Still, the effect is evident when several sound sources are performed concurrently.

By pressing Ctrl + A and selecting all ten various audio sources, you may compute the required standard of every sound source, enhance the audio input that is smaller than the normal, and create the audio signal more significant than the standard. Shrink the size of each noise source, such as the name, and normalize the sound.

Related: Best Audio Normalizers for Windows

Differences

To differentiate the meaning and impact precisely, amplification means increasing or reducing the sound, whereas normalizing means equalizing the sound. Simply defined, if you magnify ten sources by ten decibels, each of the shorter and louder noises equals ten decibels in their actual loudness.

When the ten sources are normalized, the louder sounds grow louder, conforming to the standard sound source size. Because the amplifying is done regardless, the little noises are going insane during this procedure.

Conclusion

All in all, Audacity does an excellent job at audio editing. If you simply need to modify an audio file, Audacity is a great option. For increasing and decreasing the volume of single and multiple audio files, Audacity is still one of the best bets in the market. We hope that now know how Audacity increase volume of the audio files after reading this article.

02 How to Increase Volume of Multiple Files in Audacity?

03 How to Increase Volume in Certain Parts of Track?

04 What’s the Difference between Normalize and Amplify?

Part 1: How to Increase or Decrease Volume Without Distortion and Clipping in Audacity

Audio clipping occurs when the audio input becomes too loud for an amplifier to produce, and the surplus signal creates distortion. When editing, you cannot add additional volume to your audio clip forever because this would result in clipping. In this case, you can use the Audacity application to emphasize your material by turning the volume up or down without distortion and clipping on a track or recording.

Learn how Audacity increase volume without distortion by following the procedure described below:

Step 1: First, download and install the Audacity software on your computer.

Step 2: Select the File from the menu above and click Open to open the audio file.

Step 3: Choose the audio track, go to the Effect menu and pick the Amplify option from the drop-down menu.

Note: You can increase or decrease the volume by double-clicking the track and using the slider under the Gain title.

Step 4: Increase or decrease the volume by sliding the slider or typing the amplification value in the text box next to it in the Amplify window as needed.

Note: Ensure that the Allow Clipping checkbox remains unchecked to avoid clipping. Moreover, keep in mind that increasing the volume to a greater extent can result in distortion.

Related: How to Change Audio Volume in Filmora

Part 2: How to Increase Volume of Multiple Files in Audacity?

Audacity is an open-source audio editing tool. It is used for various purposes, like audio recording, music creation, and audio file editing. It also allows you to increase and decrease the volume of audio files.

You may also apply the modifications to multiple files at once, rather than one at a time. Check out the instructions below to learn how to change the volume of multiple audio files:

Step 1: Select the Import option from the File menu, and then pick the Audio option. Browse to your audio files, choose all of them, and then click the Open option.

Step 2: To select all the files, press Ctrl + A, click on the Effect option in the menu bar and pick Amplify.

Step 3: Now, either enter the value in the text box next to the Amplification Decibels tab or use the slider under it. To verify the operation of increasing the volume, check the allow clipping checkbox. When you’re through with the options, click the Ok button.

Step 4: Amplification will be applied to all the tracks. Go to the File option from the above menu to export the files and then select the Export option.

If you’re running Audacity on macOS computer, you can watch the video tutorial below to apply effects to multiple files.

Part 3: How to Increase Volume in Certain Parts of Track?

The audacity software also allows you to alter a specific section of an audio file. The selection tool can assist in locating a particular area of the track. After you’ve chosen a section of the audio file, you may utilize the amplification effect to increase its loudness. Check out the instructions below to learn how you can achieve it:

Step 1: Launch the Audacity software on the computer. To open the audio file, go to the File menu and select Open. You may also open the file by dragging it.

Step 2: Ensure that the Selection tool is active now. Click and hold the mouse left-click to move from one spot on the track to another.

Step 3: After picking the part, go to the Effect option from the menu and select Amplify.

Step 4: Now, for that specific region, modify the amplification and click OK. This will only change the volume for the area you have selected.

Part 4: What’s the Difference between Normalize and Amplify?

Amplify and Normalize are two essential features of the Audacity tool. Many people think they are the same thing, they are right up to some extent, but there exists a big difference between both the features. Before discussing the differences, you need to know what the terms Normalize and Amplify imply.

Amplify

It is the quickest approach to comprehend the effect’s name if you want to know precisely what impacts are. The frequency of the vibration is enhanced to increase the amplification effect. As previously said, it raises a tiny sound.

Furthermore, because this amplification is extended to all frequencies and amplitude, the noise increases. If you choose ten sources and magnify them by ten decibels, each source will be ten decibels louder than your present sound.

Normalize

The meaning of normalizing is standardized, which is also a feature of its name. Whenever you pick an audio input and use the normalize feature, the level is adjusted automatically according to the previously indicated average volume size in Oda City.

As a result, when one sound source is normalized, there is no discernible difference between it and the amplification mechanism. Still, the effect is evident when several sound sources are performed concurrently.

By pressing Ctrl + A and selecting all ten various audio sources, you may compute the required standard of every sound source, enhance the audio input that is smaller than the normal, and create the audio signal more significant than the standard. Shrink the size of each noise source, such as the name, and normalize the sound.

Related: Best Audio Normalizers for Windows

Differences

To differentiate the meaning and impact precisely, amplification means increasing or reducing the sound, whereas normalizing means equalizing the sound. Simply defined, if you magnify ten sources by ten decibels, each of the shorter and louder noises equals ten decibels in their actual loudness.

When the ten sources are normalized, the louder sounds grow louder, conforming to the standard sound source size. Because the amplifying is done regardless, the little noises are going insane during this procedure.

Conclusion

All in all, Audacity does an excellent job at audio editing. If you simply need to modify an audio file, Audacity is a great option. For increasing and decreasing the volume of single and multiple audio files, Audacity is still one of the best bets in the market. We hope that now know how Audacity increase volume of the audio files after reading this article.

02 How to Increase Volume of Multiple Files in Audacity?

03 How to Increase Volume in Certain Parts of Track?

04 What’s the Difference between Normalize and Amplify?

Part 1: How to Increase or Decrease Volume Without Distortion and Clipping in Audacity

Audio clipping occurs when the audio input becomes too loud for an amplifier to produce, and the surplus signal creates distortion. When editing, you cannot add additional volume to your audio clip forever because this would result in clipping. In this case, you can use the Audacity application to emphasize your material by turning the volume up or down without distortion and clipping on a track or recording.

Learn how Audacity increase volume without distortion by following the procedure described below:

Step 1: First, download and install the Audacity software on your computer.

Step 2: Select the File from the menu above and click Open to open the audio file.

Step 3: Choose the audio track, go to the Effect menu and pick the Amplify option from the drop-down menu.

Note: You can increase or decrease the volume by double-clicking the track and using the slider under the Gain title.

Step 4: Increase or decrease the volume by sliding the slider or typing the amplification value in the text box next to it in the Amplify window as needed.

Note: Ensure that the Allow Clipping checkbox remains unchecked to avoid clipping. Moreover, keep in mind that increasing the volume to a greater extent can result in distortion.

Related: How to Change Audio Volume in Filmora

Part 2: How to Increase Volume of Multiple Files in Audacity?

Audacity is an open-source audio editing tool. It is used for various purposes, like audio recording, music creation, and audio file editing. It also allows you to increase and decrease the volume of audio files.

You may also apply the modifications to multiple files at once, rather than one at a time. Check out the instructions below to learn how to change the volume of multiple audio files:

Step 1: Select the Import option from the File menu, and then pick the Audio option. Browse to your audio files, choose all of them, and then click the Open option.

Step 2: To select all the files, press Ctrl + A, click on the Effect option in the menu bar and pick Amplify.

Step 3: Now, either enter the value in the text box next to the Amplification Decibels tab or use the slider under it. To verify the operation of increasing the volume, check the allow clipping checkbox. When you’re through with the options, click the Ok button.

Step 4: Amplification will be applied to all the tracks. Go to the File option from the above menu to export the files and then select the Export option.

If you’re running Audacity on macOS computer, you can watch the video tutorial below to apply effects to multiple files.

Part 3: How to Increase Volume in Certain Parts of Track?

The audacity software also allows you to alter a specific section of an audio file. The selection tool can assist in locating a particular area of the track. After you’ve chosen a section of the audio file, you may utilize the amplification effect to increase its loudness. Check out the instructions below to learn how you can achieve it:

Step 1: Launch the Audacity software on the computer. To open the audio file, go to the File menu and select Open. You may also open the file by dragging it.

Step 2: Ensure that the Selection tool is active now. Click and hold the mouse left-click to move from one spot on the track to another.

Step 3: After picking the part, go to the Effect option from the menu and select Amplify.

Step 4: Now, for that specific region, modify the amplification and click OK. This will only change the volume for the area you have selected.

Part 4: What’s the Difference between Normalize and Amplify?

Amplify and Normalize are two essential features of the Audacity tool. Many people think they are the same thing, they are right up to some extent, but there exists a big difference between both the features. Before discussing the differences, you need to know what the terms Normalize and Amplify imply.

Amplify

It is the quickest approach to comprehend the effect’s name if you want to know precisely what impacts are. The frequency of the vibration is enhanced to increase the amplification effect. As previously said, it raises a tiny sound.

Furthermore, because this amplification is extended to all frequencies and amplitude, the noise increases. If you choose ten sources and magnify them by ten decibels, each source will be ten decibels louder than your present sound.

Normalize

The meaning of normalizing is standardized, which is also a feature of its name. Whenever you pick an audio input and use the normalize feature, the level is adjusted automatically according to the previously indicated average volume size in Oda City.

As a result, when one sound source is normalized, there is no discernible difference between it and the amplification mechanism. Still, the effect is evident when several sound sources are performed concurrently.

By pressing Ctrl + A and selecting all ten various audio sources, you may compute the required standard of every sound source, enhance the audio input that is smaller than the normal, and create the audio signal more significant than the standard. Shrink the size of each noise source, such as the name, and normalize the sound.

Related: Best Audio Normalizers for Windows

Differences

To differentiate the meaning and impact precisely, amplification means increasing or reducing the sound, whereas normalizing means equalizing the sound. Simply defined, if you magnify ten sources by ten decibels, each of the shorter and louder noises equals ten decibels in their actual loudness.

When the ten sources are normalized, the louder sounds grow louder, conforming to the standard sound source size. Because the amplifying is done regardless, the little noises are going insane during this procedure.

Conclusion

All in all, Audacity does an excellent job at audio editing. If you simply need to modify an audio file, Audacity is a great option. For increasing and decreasing the volume of single and multiple audio files, Audacity is still one of the best bets in the market. We hope that now know how Audacity increase volume of the audio files after reading this article.

From Raw to Refined: Mastering the Art of Professional MP3 File Adjustments

Music lovers usually have a collection of MP3 songs. Some like to collect songs, and some like to listen to new songs, whereas some people are very much interested in simply editing MP3 songs. For doing this, a good MP3 editor is essential.

How to find a good audio MP3 editor? The article understudy will introduce an amazing audio editor along with its steps so that you get to know how to edit MP3 files. If you are ready to learn more about MP3 editing, then let’s get started without any further delay.

In this article

01 How to Edit MP3 Files?

02 3 Popular Free MP3 Editor for Windows

Part 1 How to Edit MP3 Files?

As we have mentioned earlier, to edit MP3 files, a good audio editor is essential. Do you know any good Audio Editor? Although there are various editors, Wondershare Filmora is unbeatable. It offers a whole editing world to its users. Filmora is hands down the best software when it comes to audio editing. Its intuitive interface is easy to understand and work with that even beginners can use it.

What else does Filmora have to offer? It provides various editing elements. You name anything, and Filmora has it. The editor has a wide variety of Transitions, Effects, Filters, and other elements. Interestingly, Filmora also has a media library, Filmstock, that is full of amazing things.

Features of Filmora That Will Amaze You

As we are talking about MP3 editing so, let’s shed light on Filmora Audio Editor. The editor has some mind-blowing features that you should know.

• Audio Split is a key feature that good Audio Editors must have. Filmora lets you split audio, and additionally, you can also Trim Audio with this editor.
• A very highlighting feature that you get from Filmora Audio Editor is ‘Detach Audio from Video.’ With this feature, you can detach and remove audio from video.
• Features like Audio Denoise, Audio Mixer, Audio Equalizer are also offered by Wondershare Filmora Audio Editor.
• Ready to know a fun feature? Not only can you add Voiceover, Filmora easily replaces the original audio of the video.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step-by-Step Guideline to use Filmora Audio Editor

Are you ready to use Filmora Audio Editor, but do you know how to edit an MP3 file? Don’t worry if you have never done this before because we are about to share its step-by-step guideline.

Step 1: Importing Audio

To edit the MP3 file with Filmora Audio Editor, you firstly need to create a new project. After the project has been created, let’s import the media file. For that, go to ‘Import Media’ from the Files tab and select ‘Import Media Files.’

Step 2: Audio Editing Panel

Once the file has been imported, drag it onto the timeline so that you can start editing the audio. You have to double click on the audio file to open the ‘Audio Editing Panel.’

Step 3: Let’s Start Editing

With the Audio Editing Panel, you can completely edit and customize the MP3 file. It offers the ‘Fade In’ and ‘Fade Out’ options. You can also remove background noise from the ‘Denoise’ option. Moreover, you can use the Equalizer, set the Pitch, etc.

Step 4: Export the File

Lastly, once the editing is complete and you are satisfied, you can export the file. For that, hit the ‘Export’ button to open the export window. There, head over to the ‘Local’ section to select ‘MP3’ as the output format and ‘Export’ it to your device.

Part 2 3 Popular Free MP3 Editor for Windows

Now that we have discussed in detail Wondershare Filmora, should we talk a little about free MP3 editors? You can get a variety of free MP3 editors for Windows on the internet, but how do you know that yours is the best? If you want to know about the 3 best MP3 editors that are famous for their features, then this section is for you.

01 Audacity

Audacity is a fantastic audio editing software that is perfect for music trimming, sound effects, and dialogue. The tool offers a free version to its users. Audacity is open-source, a multi-track audio editor that makes editing easy.

The plus point for this editing software is that it supports a wide range of file formats like FLAC, WAV, MP3, and others. What attracts the users? Well, the easy and simple interface of Audacity attracts a lot of users. Another thing that matters a lot is the installation process, and in Audacity’s case, the installation is pretty easy.

• For endless audio editing and merging audio files, nothing is better than Audacity. Also, the software supports 16-bit, 24-bit, and 32-bit sound quality.
• Audacity provides support to various plug-ins, for instance, LV2, Nyquist, VST, LADSPA, and also Audio Unit Effect.
• Another interesting thing about Audacity is that it records live audio from Mic or Mixer. You can also combine files and export them in different formats.

02 Ocenaudio

Can you name a great audio editor for home musicians and podcasters? Yes, Ocenaudio Audio Editor is the perfect, free audio editing platform for podcasters and home musicians. The audio editor has a very clear interface that everyone can use easily, without any complications. Editing MP3 files and analyzing them is made easy with Ocenaudio.

The audio editing software is famous because of its efficiency as it can edit large files. Do you want to know the fascinating thing about Ocenaudio? Well, the software uses advanced memory management, which means it opens files without wasting your PC’s memory.

• The audio editor is the best option for everyday audio editing. Also, the software offers great filter selection with precise selection tools.
• What attracts the most users is its powerful and complete spectrogram view. Along with the waveform view, Ocenaudio also features a spectrogram view of the audio files.
• The software offers uniform features and the same graphics on all versions. Moreover, it supports various platforms like Windows, Mac OS X, and Linux.

03 WavePad Audio Editor

Are you ready to talk about WavePad Audio Editor? The software is very famous because of the wide range of features it offers. What can you do with this audio editor? Let’s start sharing!

With WavePad Audio Editor, you can edit audio by trimming, cutting, joining, splitting, etc. In addition to editing, you can also add different effects to your audio. For instance, effects like to normalize, amplify, equalize, etc. The audio editor also supports extracting audio from CDs and removing audio noise.

Do you know what else it can do? You can easily edit and export the audio file in different formats from WavePad Audio Editor.

• The most amazing thing about WavePad Audio Editor is that it supports batch processing. You no longer have to wait as the software works very efficiently.
• Want to know something interesting about WavePad Audio Editor? It is compatible with different file formats and holds strong editing capabilities.
• Which audio editor can compress files? With WavePad, you can compress files with great ease and load files with just two mouse clicks.

Bottom Line

As we promised earlier that we would help you and guide you on how to edit MP3 files so, this article has everything you need. We shared how you can edit MP3 files with the best audio MP3 editor, Wondershare Filmora. Along with that, we also shared 3 popular and free audio MP3 editors.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

02 3 Popular Free MP3 Editor for Windows

Part 1 How to Edit MP3 Files?

As we have mentioned earlier, to edit MP3 files, a good audio editor is essential. Do you know any good Audio Editor? Although there are various editors, Wondershare Filmora is unbeatable. It offers a whole editing world to its users. Filmora is hands down the best software when it comes to audio editing. Its intuitive interface is easy to understand and work with that even beginners can use it.

What else does Filmora have to offer? It provides various editing elements. You name anything, and Filmora has it. The editor has a wide variety of Transitions, Effects, Filters, and other elements. Interestingly, Filmora also has a media library, Filmstock, that is full of amazing things.

Features of Filmora That Will Amaze You

As we are talking about MP3 editing so, let’s shed light on Filmora Audio Editor. The editor has some mind-blowing features that you should know.

• Audio Split is a key feature that good Audio Editors must have. Filmora lets you split audio, and additionally, you can also Trim Audio with this editor.
• A very highlighting feature that you get from Filmora Audio Editor is ‘Detach Audio from Video.’ With this feature, you can detach and remove audio from video.
• Features like Audio Denoise, Audio Mixer, Audio Equalizer are also offered by Wondershare Filmora Audio Editor.
• Ready to know a fun feature? Not only can you add Voiceover, Filmora easily replaces the original audio of the video.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step-by-Step Guideline to use Filmora Audio Editor

Are you ready to use Filmora Audio Editor, but do you know how to edit an MP3 file? Don’t worry if you have never done this before because we are about to share its step-by-step guideline.

Step 1: Importing Audio

To edit the MP3 file with Filmora Audio Editor, you firstly need to create a new project. After the project has been created, let’s import the media file. For that, go to ‘Import Media’ from the Files tab and select ‘Import Media Files.’

Step 2: Audio Editing Panel

Once the file has been imported, drag it onto the timeline so that you can start editing the audio. You have to double click on the audio file to open the ‘Audio Editing Panel.’

Step 3: Let’s Start Editing

With the Audio Editing Panel, you can completely edit and customize the MP3 file. It offers the ‘Fade In’ and ‘Fade Out’ options. You can also remove background noise from the ‘Denoise’ option. Moreover, you can use the Equalizer, set the Pitch, etc.

Step 4: Export the File

Lastly, once the editing is complete and you are satisfied, you can export the file. For that, hit the ‘Export’ button to open the export window. There, head over to the ‘Local’ section to select ‘MP3’ as the output format and ‘Export’ it to your device.

Part 2 3 Popular Free MP3 Editor for Windows

Now that we have discussed in detail Wondershare Filmora, should we talk a little about free MP3 editors? You can get a variety of free MP3 editors for Windows on the internet, but how do you know that yours is the best? If you want to know about the 3 best MP3 editors that are famous for their features, then this section is for you.

01 Audacity

Audacity is a fantastic audio editing software that is perfect for music trimming, sound effects, and dialogue. The tool offers a free version to its users. Audacity is open-source, a multi-track audio editor that makes editing easy.

The plus point for this editing software is that it supports a wide range of file formats like FLAC, WAV, MP3, and others. What attracts the users? Well, the easy and simple interface of Audacity attracts a lot of users. Another thing that matters a lot is the installation process, and in Audacity’s case, the installation is pretty easy.

• For endless audio editing and merging audio files, nothing is better than Audacity. Also, the software supports 16-bit, 24-bit, and 32-bit sound quality.
• Audacity provides support to various plug-ins, for instance, LV2, Nyquist, VST, LADSPA, and also Audio Unit Effect.
• Another interesting thing about Audacity is that it records live audio from Mic or Mixer. You can also combine files and export them in different formats.

02 Ocenaudio

Can you name a great audio editor for home musicians and podcasters? Yes, Ocenaudio Audio Editor is the perfect, free audio editing platform for podcasters and home musicians. The audio editor has a very clear interface that everyone can use easily, without any complications. Editing MP3 files and analyzing them is made easy with Ocenaudio.

The audio editing software is famous because of its efficiency as it can edit large files. Do you want to know the fascinating thing about Ocenaudio? Well, the software uses advanced memory management, which means it opens files without wasting your PC’s memory.

• The audio editor is the best option for everyday audio editing. Also, the software offers great filter selection with precise selection tools.
• What attracts the most users is its powerful and complete spectrogram view. Along with the waveform view, Ocenaudio also features a spectrogram view of the audio files.
• The software offers uniform features and the same graphics on all versions. Moreover, it supports various platforms like Windows, Mac OS X, and Linux.

03 WavePad Audio Editor

Are you ready to talk about WavePad Audio Editor? The software is very famous because of the wide range of features it offers. What can you do with this audio editor? Let’s start sharing!

With WavePad Audio Editor, you can edit audio by trimming, cutting, joining, splitting, etc. In addition to editing, you can also add different effects to your audio. For instance, effects like to normalize, amplify, equalize, etc. The audio editor also supports extracting audio from CDs and removing audio noise.

Do you know what else it can do? You can easily edit and export the audio file in different formats from WavePad Audio Editor.

• The most amazing thing about WavePad Audio Editor is that it supports batch processing. You no longer have to wait as the software works very efficiently.
• Want to know something interesting about WavePad Audio Editor? It is compatible with different file formats and holds strong editing capabilities.
• Which audio editor can compress files? With WavePad, you can compress files with great ease and load files with just two mouse clicks.

Bottom Line

As we promised earlier that we would help you and guide you on how to edit MP3 files so, this article has everything you need. We shared how you can edit MP3 files with the best audio MP3 editor, Wondershare Filmora. Along with that, we also shared 3 popular and free audio MP3 editors.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

02 3 Popular Free MP3 Editor for Windows

Part 1 How to Edit MP3 Files?

As we have mentioned earlier, to edit MP3 files, a good audio editor is essential. Do you know any good Audio Editor? Although there are various editors, Wondershare Filmora is unbeatable. It offers a whole editing world to its users. Filmora is hands down the best software when it comes to audio editing. Its intuitive interface is easy to understand and work with that even beginners can use it.

What else does Filmora have to offer? It provides various editing elements. You name anything, and Filmora has it. The editor has a wide variety of Transitions, Effects, Filters, and other elements. Interestingly, Filmora also has a media library, Filmstock, that is full of amazing things.

Features of Filmora That Will Amaze You

As we are talking about MP3 editing so, let’s shed light on Filmora Audio Editor. The editor has some mind-blowing features that you should know.

• Audio Split is a key feature that good Audio Editors must have. Filmora lets you split audio, and additionally, you can also Trim Audio with this editor.
• A very highlighting feature that you get from Filmora Audio Editor is ‘Detach Audio from Video.’ With this feature, you can detach and remove audio from video.
• Features like Audio Denoise, Audio Mixer, Audio Equalizer are also offered by Wondershare Filmora Audio Editor.
• Ready to know a fun feature? Not only can you add Voiceover, Filmora easily replaces the original audio of the video.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step-by-Step Guideline to use Filmora Audio Editor

Are you ready to use Filmora Audio Editor, but do you know how to edit an MP3 file? Don’t worry if you have never done this before because we are about to share its step-by-step guideline.

Step 1: Importing Audio

To edit the MP3 file with Filmora Audio Editor, you firstly need to create a new project. After the project has been created, let’s import the media file. For that, go to ‘Import Media’ from the Files tab and select ‘Import Media Files.’

Step 2: Audio Editing Panel

Once the file has been imported, drag it onto the timeline so that you can start editing the audio. You have to double click on the audio file to open the ‘Audio Editing Panel.’

Step 3: Let’s Start Editing

With the Audio Editing Panel, you can completely edit and customize the MP3 file. It offers the ‘Fade In’ and ‘Fade Out’ options. You can also remove background noise from the ‘Denoise’ option. Moreover, you can use the Equalizer, set the Pitch, etc.

Step 4: Export the File

Lastly, once the editing is complete and you are satisfied, you can export the file. For that, hit the ‘Export’ button to open the export window. There, head over to the ‘Local’ section to select ‘MP3’ as the output format and ‘Export’ it to your device.

Part 2 3 Popular Free MP3 Editor for Windows

Now that we have discussed in detail Wondershare Filmora, should we talk a little about free MP3 editors? You can get a variety of free MP3 editors for Windows on the internet, but how do you know that yours is the best? If you want to know about the 3 best MP3 editors that are famous for their features, then this section is for you.

01 Audacity

Audacity is a fantastic audio editing software that is perfect for music trimming, sound effects, and dialogue. The tool offers a free version to its users. Audacity is open-source, a multi-track audio editor that makes editing easy.

The plus point for this editing software is that it supports a wide range of file formats like FLAC, WAV, MP3, and others. What attracts the users? Well, the easy and simple interface of Audacity attracts a lot of users. Another thing that matters a lot is the installation process, and in Audacity’s case, the installation is pretty easy.

• For endless audio editing and merging audio files, nothing is better than Audacity. Also, the software supports 16-bit, 24-bit, and 32-bit sound quality.
• Audacity provides support to various plug-ins, for instance, LV2, Nyquist, VST, LADSPA, and also Audio Unit Effect.
• Another interesting thing about Audacity is that it records live audio from Mic or Mixer. You can also combine files and export them in different formats.

02 Ocenaudio

Can you name a great audio editor for home musicians and podcasters? Yes, Ocenaudio Audio Editor is the perfect, free audio editing platform for podcasters and home musicians. The audio editor has a very clear interface that everyone can use easily, without any complications. Editing MP3 files and analyzing them is made easy with Ocenaudio.

The audio editing software is famous because of its efficiency as it can edit large files. Do you want to know the fascinating thing about Ocenaudio? Well, the software uses advanced memory management, which means it opens files without wasting your PC’s memory.

• The audio editor is the best option for everyday audio editing. Also, the software offers great filter selection with precise selection tools.
• What attracts the most users is its powerful and complete spectrogram view. Along with the waveform view, Ocenaudio also features a spectrogram view of the audio files.
• The software offers uniform features and the same graphics on all versions. Moreover, it supports various platforms like Windows, Mac OS X, and Linux.

03 WavePad Audio Editor

Are you ready to talk about WavePad Audio Editor? The software is very famous because of the wide range of features it offers. What can you do with this audio editor? Let’s start sharing!

With WavePad Audio Editor, you can edit audio by trimming, cutting, joining, splitting, etc. In addition to editing, you can also add different effects to your audio. For instance, effects like to normalize, amplify, equalize, etc. The audio editor also supports extracting audio from CDs and removing audio noise.

Do you know what else it can do? You can easily edit and export the audio file in different formats from WavePad Audio Editor.

• The most amazing thing about WavePad Audio Editor is that it supports batch processing. You no longer have to wait as the software works very efficiently.
• Want to know something interesting about WavePad Audio Editor? It is compatible with different file formats and holds strong editing capabilities.
• Which audio editor can compress files? With WavePad, you can compress files with great ease and load files with just two mouse clicks.

Bottom Line

As we promised earlier that we would help you and guide you on how to edit MP3 files so, this article has everything you need. We shared how you can edit MP3 files with the best audio MP3 editor, Wondershare Filmora. Along with that, we also shared 3 popular and free audio MP3 editors.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

02 3 Popular Free MP3 Editor for Windows

Part 1 How to Edit MP3 Files?

As we have mentioned earlier, to edit MP3 files, a good audio editor is essential. Do you know any good Audio Editor? Although there are various editors, Wondershare Filmora is unbeatable. It offers a whole editing world to its users. Filmora is hands down the best software when it comes to audio editing. Its intuitive interface is easy to understand and work with that even beginners can use it.

What else does Filmora have to offer? It provides various editing elements. You name anything, and Filmora has it. The editor has a wide variety of Transitions, Effects, Filters, and other elements. Interestingly, Filmora also has a media library, Filmstock, that is full of amazing things.

Features of Filmora That Will Amaze You

As we are talking about MP3 editing so, let’s shed light on Filmora Audio Editor. The editor has some mind-blowing features that you should know.

• Audio Split is a key feature that good Audio Editors must have. Filmora lets you split audio, and additionally, you can also Trim Audio with this editor.
• A very highlighting feature that you get from Filmora Audio Editor is ‘Detach Audio from Video.’ With this feature, you can detach and remove audio from video.
• Features like Audio Denoise, Audio Mixer, Audio Equalizer are also offered by Wondershare Filmora Audio Editor.
• Ready to know a fun feature? Not only can you add Voiceover, Filmora easily replaces the original audio of the video.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step-by-Step Guideline to use Filmora Audio Editor

Are you ready to use Filmora Audio Editor, but do you know how to edit an MP3 file? Don’t worry if you have never done this before because we are about to share its step-by-step guideline.

Step 1: Importing Audio

To edit the MP3 file with Filmora Audio Editor, you firstly need to create a new project. After the project has been created, let’s import the media file. For that, go to ‘Import Media’ from the Files tab and select ‘Import Media Files.’

Step 2: Audio Editing Panel

Once the file has been imported, drag it onto the timeline so that you can start editing the audio. You have to double click on the audio file to open the ‘Audio Editing Panel.’

Step 3: Let’s Start Editing

With the Audio Editing Panel, you can completely edit and customize the MP3 file. It offers the ‘Fade In’ and ‘Fade Out’ options. You can also remove background noise from the ‘Denoise’ option. Moreover, you can use the Equalizer, set the Pitch, etc.

Step 4: Export the File

Lastly, once the editing is complete and you are satisfied, you can export the file. For that, hit the ‘Export’ button to open the export window. There, head over to the ‘Local’ section to select ‘MP3’ as the output format and ‘Export’ it to your device.

Part 2 3 Popular Free MP3 Editor for Windows

Now that we have discussed in detail Wondershare Filmora, should we talk a little about free MP3 editors? You can get a variety of free MP3 editors for Windows on the internet, but how do you know that yours is the best? If you want to know about the 3 best MP3 editors that are famous for their features, then this section is for you.

01 Audacity

Audacity is a fantastic audio editing software that is perfect for music trimming, sound effects, and dialogue. The tool offers a free version to its users. Audacity is open-source, a multi-track audio editor that makes editing easy.

The plus point for this editing software is that it supports a wide range of file formats like FLAC, WAV, MP3, and others. What attracts the users? Well, the easy and simple interface of Audacity attracts a lot of users. Another thing that matters a lot is the installation process, and in Audacity’s case, the installation is pretty easy.

• For endless audio editing and merging audio files, nothing is better than Audacity. Also, the software supports 16-bit, 24-bit, and 32-bit sound quality.
• Audacity provides support to various plug-ins, for instance, LV2, Nyquist, VST, LADSPA, and also Audio Unit Effect.
• Another interesting thing about Audacity is that it records live audio from Mic or Mixer. You can also combine files and export them in different formats.

02 Ocenaudio

Can you name a great audio editor for home musicians and podcasters? Yes, Ocenaudio Audio Editor is the perfect, free audio editing platform for podcasters and home musicians. The audio editor has a very clear interface that everyone can use easily, without any complications. Editing MP3 files and analyzing them is made easy with Ocenaudio.

The audio editing software is famous because of its efficiency as it can edit large files. Do you want to know the fascinating thing about Ocenaudio? Well, the software uses advanced memory management, which means it opens files without wasting your PC’s memory.

• The audio editor is the best option for everyday audio editing. Also, the software offers great filter selection with precise selection tools.
• What attracts the most users is its powerful and complete spectrogram view. Along with the waveform view, Ocenaudio also features a spectrogram view of the audio files.
• The software offers uniform features and the same graphics on all versions. Moreover, it supports various platforms like Windows, Mac OS X, and Linux.

03 WavePad Audio Editor

Are you ready to talk about WavePad Audio Editor? The software is very famous because of the wide range of features it offers. What can you do with this audio editor? Let’s start sharing!

With WavePad Audio Editor, you can edit audio by trimming, cutting, joining, splitting, etc. In addition to editing, you can also add different effects to your audio. For instance, effects like to normalize, amplify, equalize, etc. The audio editor also supports extracting audio from CDs and removing audio noise.

Do you know what else it can do? You can easily edit and export the audio file in different formats from WavePad Audio Editor.

• The most amazing thing about WavePad Audio Editor is that it supports batch processing. You no longer have to wait as the software works very efficiently.
• Want to know something interesting about WavePad Audio Editor? It is compatible with different file formats and holds strong editing capabilities.
• Which audio editor can compress files? With WavePad, you can compress files with great ease and load files with just two mouse clicks.

Bottom Line

As we promised earlier that we would help you and guide you on how to edit MP3 files so, this article has everything you need. We shared how you can edit MP3 files with the best audio MP3 editor, Wondershare Filmora. Along with that, we also shared 3 popular and free audio MP3 editors.

Wondershare Filmora

Get started easily with Filmora’s powerful performance, intuitive interface, and countless effects!

Try It Free Try It Free Try It Free Learn More >

Enhancing Visual Focus: Techniques to Remove Unwanted Audio Elements From Videos in Desktop Settings and Online Media

If you are using the wrong tool, then working with videos can be tough and frustrating. This is because not every tool offers the same features and functionalities that an amazing tool can offer. Let’s take a scenario; imagine you come across a video, but you don’t like the sound of it. What will you do now? Are you going to compromise on the sound, or are you going to find another video?

What if you get a chance to remove sound from the video? This option sounds a lot better than the other options. The next thing you need to look for is a good sound remover. There are a few brilliant tools that allow video editing and are also great sound remover from video. Keep reading the article if you are interested in learning more about this.

In this article

01 How to Remove Sound from Video on Windows and Mac

02 How to Remove Sound from Video Online

Part 1. How to Remove Sound from Video on Windows and Mac

This is the social media era. People are always uploading and sharing their life. Some people generally referred to as Influencers have adopted social media as their career. Suppose you are one of those, and you want to add a video clip to your content, but the background sound is not satisfying you. The best possible solution to this problem is to delete sound from the video.

If you are facing a similar problem, then this section of the article is for you. We are about to introduce background sound remover. It doesn’t matter if you are a Windows or Mac user; the sound removers work well on both platforms.

Method 1: Wondershare Filmora

The first sound remover from video that we are going to talk about is Wondershare Filmora. This amazing video editor offers a whole different editing world to you. With Filmora video editor, you can create unique videos without sweating. The software has a wide range of effects, transitions, titles, and other editing elements.

Moreover, Filmora offers limitless video editing features. With just a few clicks, you can do motion tracking keyframing. Cool edits like the split-screen are also possible with Filmora. The software is multi-track, drag and drop, and easy to use.

Along with this, Filmora also has audio editing features. From one platform, you can edit video audio and also remove sound. The audio editing lets you add background music, split audio, and also mute clip. You can also use Filmora’s Adjust Audio Volume, Audio Equalizer, and Audio Denoise feature. By following the steps shared below, you can quickly delete sound from video using Wondershare Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Create Project in Filmora

The process to remove sound from video starts when you launch Wondershare Filmora on your respective device. Then, select your desired aspect ratio and hit the ‘New Project’ option to get started.

Step 2: Import Media File

The next step asks you to import the media file from which you plan to remove sound. For this, head to the ‘File’ tab from the top panel. Click on it and select the ‘Import Media’ option. Then click on the ‘Import Media Files.’ As soon as the file is imported, drag and drop it onto the timeline. You can also change the resolution and the frame rate for the media file.

Step 3: Audio Editing

To remove sound from video, the user needs to open the audio menu. For that, right-click on the media file and select the option of ‘Audio.’ A sub-menu will show up on the screen. From that menu, you should choose the ‘Detach Audio’ option. This removes and separates the audio from the video, and it is displayed separately on the timeline.

Step 4: Exporting No Sound Video File

You can right-click on the audio file and delete it. Or else, select the audio file and hit the ‘Delete’ button on the keyboard to delete it. Lastly, you can preview the final file and export it. Select the output format for your video and hit the ‘Export’ button to get the sound-free video.

Method 2: Adobe Premiere Pro

The following background sound remover that we are sharing is Adobe Premiere Pro. The video editor is great to work on both Windows and Mac. Premiere Pro has a very responsive interface. It supports multiple file formats and various video types. It offers Motion Graphics templates along with VR editing and VR rotates sphere.

With Premiere Pro, you can open multiple projects at once and work on them simultaneously. You can switch and lift scenes from one another. The video editing software offers effects, transitions, labels, and other things. You can also remove background sound from videos with the help of Adobe Premiere Pro. If you don’t know how to remove sound from video, then follow the step-by-step guideline shared below.

Step 1: Create New Project

For removing sound from video, start by opening Adobe Premiere Pro. Once its interface appears, you need to create a ‘New Project’ so that you can get started.

Step 2: Import Video File

For the next step, you need to import the media file to Premiere Pro. This could be done by clicking on the ‘File’ option from the top panel. Then, select the ‘Import’ button and browse the media file you want to work with.

Step 3: Drag to Premiere Pro Timeline

Once your file has been imported, drag it to the Project timeline. After that, you need to highlight the clip in the timeline by clicking on it. Now, right-click on the highlighted clip. From the menu list, select the option of ‘Unlink.’ This separates and unlinks the audio from the video file.

Step 4: Delete the Audio

Since the audio is unlinked from the media file, you can now delete that audio file. You simply have to select the audio layer and press the ‘Delete’ key or right-click on the audio and select the ‘Clear’ option from the menu to delete the audio. Your video without sound is now ready to be exported.

Part 2. How to Remove Sound from Video Online

Since we have shared the 2 best sound removers from video for both Mac and Windows, now it’s time to shed light on an online sound remover. Clideo is the platform that you can use to remove sound from your video. The online tool is fast and easy to use for removing sound. Clideo supports a variety of video formats like MP4, AVI, MPG, WMV, and many more.

The tool lets you watch the preview of the video. If the video satisfies you, only then save it to your device. Clideo is compatible with multiple devices, for instance, iOS and Android phones. It also supports Windows and Mac computers. If you want to learn about how to delete sound from video using Clideo, then keep reading.

Step 1: Upload Media File

Start the process by accessing the online sound remover tool, Clideo. Then, you need to upload the media file that you want to work with. For this, you can either click on ‘Choose File’ or browse for the video on your device. Or else, you can also upload from Dropbox or Google Drive.

Step 2: Removing Sound

As the tool removes sound from videos. So, as soon as the video is uploaded, Clideo takes a few seconds to remove the sound and to mute your video.

Step 3: Download the Final Video

Once the sound has been removed, with Clideo, you can preview the result. Watch the muted video. If you are satisfied with the final video, then download it to your device.

Conclusion

Sound removers are very helpful tools. You can remove sound and add your desired background sound to it. If you have been struggling and looking for the best background sound removers from videos, then this article is perfect for you. We have talked about different tools to remove sound, both for Mac and Windows. We also discussed an online tool that is very fast and easy.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor.

Numerous effects, footage and audio.

Try It Free Try It Free

02 How to Remove Sound from Video Online

Part 1. How to Remove Sound from Video on Windows and Mac

This is the social media era. People are always uploading and sharing their life. Some people generally referred to as Influencers have adopted social media as their career. Suppose you are one of those, and you want to add a video clip to your content, but the background sound is not satisfying you. The best possible solution to this problem is to delete sound from the video.

If you are facing a similar problem, then this section of the article is for you. We are about to introduce background sound remover. It doesn’t matter if you are a Windows or Mac user; the sound removers work well on both platforms.

Method 1: Wondershare Filmora

The first sound remover from video that we are going to talk about is Wondershare Filmora. This amazing video editor offers a whole different editing world to you. With Filmora video editor, you can create unique videos without sweating. The software has a wide range of effects, transitions, titles, and other editing elements.

Moreover, Filmora offers limitless video editing features. With just a few clicks, you can do motion tracking keyframing. Cool edits like the split-screen are also possible with Filmora. The software is multi-track, drag and drop, and easy to use.

Along with this, Filmora also has audio editing features. From one platform, you can edit video audio and also remove sound. The audio editing lets you add background music, split audio, and also mute clip. You can also use Filmora’s Adjust Audio Volume, Audio Equalizer, and Audio Denoise feature. By following the steps shared below, you can quickly delete sound from video using Wondershare Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Create Project in Filmora

The process to remove sound from video starts when you launch Wondershare Filmora on your respective device. Then, select your desired aspect ratio and hit the ‘New Project’ option to get started.

Step 2: Import Media File

The next step asks you to import the media file from which you plan to remove sound. For this, head to the ‘File’ tab from the top panel. Click on it and select the ‘Import Media’ option. Then click on the ‘Import Media Files.’ As soon as the file is imported, drag and drop it onto the timeline. You can also change the resolution and the frame rate for the media file.

Step 3: Audio Editing

To remove sound from video, the user needs to open the audio menu. For that, right-click on the media file and select the option of ‘Audio.’ A sub-menu will show up on the screen. From that menu, you should choose the ‘Detach Audio’ option. This removes and separates the audio from the video, and it is displayed separately on the timeline.

Step 4: Exporting No Sound Video File

You can right-click on the audio file and delete it. Or else, select the audio file and hit the ‘Delete’ button on the keyboard to delete it. Lastly, you can preview the final file and export it. Select the output format for your video and hit the ‘Export’ button to get the sound-free video.

Method 2: Adobe Premiere Pro

The following background sound remover that we are sharing is Adobe Premiere Pro. The video editor is great to work on both Windows and Mac. Premiere Pro has a very responsive interface. It supports multiple file formats and various video types. It offers Motion Graphics templates along with VR editing and VR rotates sphere.

With Premiere Pro, you can open multiple projects at once and work on them simultaneously. You can switch and lift scenes from one another. The video editing software offers effects, transitions, labels, and other things. You can also remove background sound from videos with the help of Adobe Premiere Pro. If you don’t know how to remove sound from video, then follow the step-by-step guideline shared below.

Step 1: Create New Project

For removing sound from video, start by opening Adobe Premiere Pro. Once its interface appears, you need to create a ‘New Project’ so that you can get started.

Step 2: Import Video File

For the next step, you need to import the media file to Premiere Pro. This could be done by clicking on the ‘File’ option from the top panel. Then, select the ‘Import’ button and browse the media file you want to work with.

Step 3: Drag to Premiere Pro Timeline

Once your file has been imported, drag it to the Project timeline. After that, you need to highlight the clip in the timeline by clicking on it. Now, right-click on the highlighted clip. From the menu list, select the option of ‘Unlink.’ This separates and unlinks the audio from the video file.

Step 4: Delete the Audio

Since the audio is unlinked from the media file, you can now delete that audio file. You simply have to select the audio layer and press the ‘Delete’ key or right-click on the audio and select the ‘Clear’ option from the menu to delete the audio. Your video without sound is now ready to be exported.

Part 2. How to Remove Sound from Video Online

Since we have shared the 2 best sound removers from video for both Mac and Windows, now it’s time to shed light on an online sound remover. Clideo is the platform that you can use to remove sound from your video. The online tool is fast and easy to use for removing sound. Clideo supports a variety of video formats like MP4, AVI, MPG, WMV, and many more.

The tool lets you watch the preview of the video. If the video satisfies you, only then save it to your device. Clideo is compatible with multiple devices, for instance, iOS and Android phones. It also supports Windows and Mac computers. If you want to learn about how to delete sound from video using Clideo, then keep reading.

Step 1: Upload Media File

Start the process by accessing the online sound remover tool, Clideo. Then, you need to upload the media file that you want to work with. For this, you can either click on ‘Choose File’ or browse for the video on your device. Or else, you can also upload from Dropbox or Google Drive.

Step 2: Removing Sound

As the tool removes sound from videos. So, as soon as the video is uploaded, Clideo takes a few seconds to remove the sound and to mute your video.

Step 3: Download the Final Video

Once the sound has been removed, with Clideo, you can preview the result. Watch the muted video. If you are satisfied with the final video, then download it to your device.

Conclusion

Sound removers are very helpful tools. You can remove sound and add your desired background sound to it. If you have been struggling and looking for the best background sound removers from videos, then this article is perfect for you. We have talked about different tools to remove sound, both for Mac and Windows. We also discussed an online tool that is very fast and easy.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor.

Numerous effects, footage and audio.

Try It Free Try It Free

02 How to Remove Sound from Video Online

Part 1. How to Remove Sound from Video on Windows and Mac

This is the social media era. People are always uploading and sharing their life. Some people generally referred to as Influencers have adopted social media as their career. Suppose you are one of those, and you want to add a video clip to your content, but the background sound is not satisfying you. The best possible solution to this problem is to delete sound from the video.

If you are facing a similar problem, then this section of the article is for you. We are about to introduce background sound remover. It doesn’t matter if you are a Windows or Mac user; the sound removers work well on both platforms.

Method 1: Wondershare Filmora

The first sound remover from video that we are going to talk about is Wondershare Filmora. This amazing video editor offers a whole different editing world to you. With Filmora video editor, you can create unique videos without sweating. The software has a wide range of effects, transitions, titles, and other editing elements.

Moreover, Filmora offers limitless video editing features. With just a few clicks, you can do motion tracking keyframing. Cool edits like the split-screen are also possible with Filmora. The software is multi-track, drag and drop, and easy to use.

Along with this, Filmora also has audio editing features. From one platform, you can edit video audio and also remove sound. The audio editing lets you add background music, split audio, and also mute clip. You can also use Filmora’s Adjust Audio Volume, Audio Equalizer, and Audio Denoise feature. By following the steps shared below, you can quickly delete sound from video using Wondershare Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Create Project in Filmora

The process to remove sound from video starts when you launch Wondershare Filmora on your respective device. Then, select your desired aspect ratio and hit the ‘New Project’ option to get started.

Step 2: Import Media File

The next step asks you to import the media file from which you plan to remove sound. For this, head to the ‘File’ tab from the top panel. Click on it and select the ‘Import Media’ option. Then click on the ‘Import Media Files.’ As soon as the file is imported, drag and drop it onto the timeline. You can also change the resolution and the frame rate for the media file.

Step 3: Audio Editing

To remove sound from video, the user needs to open the audio menu. For that, right-click on the media file and select the option of ‘Audio.’ A sub-menu will show up on the screen. From that menu, you should choose the ‘Detach Audio’ option. This removes and separates the audio from the video, and it is displayed separately on the timeline.

Step 4: Exporting No Sound Video File

You can right-click on the audio file and delete it. Or else, select the audio file and hit the ‘Delete’ button on the keyboard to delete it. Lastly, you can preview the final file and export it. Select the output format for your video and hit the ‘Export’ button to get the sound-free video.

Method 2: Adobe Premiere Pro

The following background sound remover that we are sharing is Adobe Premiere Pro. The video editor is great to work on both Windows and Mac. Premiere Pro has a very responsive interface. It supports multiple file formats and various video types. It offers Motion Graphics templates along with VR editing and VR rotates sphere.

With Premiere Pro, you can open multiple projects at once and work on them simultaneously. You can switch and lift scenes from one another. The video editing software offers effects, transitions, labels, and other things. You can also remove background sound from videos with the help of Adobe Premiere Pro. If you don’t know how to remove sound from video, then follow the step-by-step guideline shared below.

Step 1: Create New Project

For removing sound from video, start by opening Adobe Premiere Pro. Once its interface appears, you need to create a ‘New Project’ so that you can get started.

Step 2: Import Video File

For the next step, you need to import the media file to Premiere Pro. This could be done by clicking on the ‘File’ option from the top panel. Then, select the ‘Import’ button and browse the media file you want to work with.

Step 3: Drag to Premiere Pro Timeline

Once your file has been imported, drag it to the Project timeline. After that, you need to highlight the clip in the timeline by clicking on it. Now, right-click on the highlighted clip. From the menu list, select the option of ‘Unlink.’ This separates and unlinks the audio from the video file.

Step 4: Delete the Audio

Since the audio is unlinked from the media file, you can now delete that audio file. You simply have to select the audio layer and press the ‘Delete’ key or right-click on the audio and select the ‘Clear’ option from the menu to delete the audio. Your video without sound is now ready to be exported.

Part 2. How to Remove Sound from Video Online

Since we have shared the 2 best sound removers from video for both Mac and Windows, now it’s time to shed light on an online sound remover. Clideo is the platform that you can use to remove sound from your video. The online tool is fast and easy to use for removing sound. Clideo supports a variety of video formats like MP4, AVI, MPG, WMV, and many more.

The tool lets you watch the preview of the video. If the video satisfies you, only then save it to your device. Clideo is compatible with multiple devices, for instance, iOS and Android phones. It also supports Windows and Mac computers. If you want to learn about how to delete sound from video using Clideo, then keep reading.

Step 1: Upload Media File

Start the process by accessing the online sound remover tool, Clideo. Then, you need to upload the media file that you want to work with. For this, you can either click on ‘Choose File’ or browse for the video on your device. Or else, you can also upload from Dropbox or Google Drive.

Step 2: Removing Sound

As the tool removes sound from videos. So, as soon as the video is uploaded, Clideo takes a few seconds to remove the sound and to mute your video.

Step 3: Download the Final Video

Once the sound has been removed, with Clideo, you can preview the result. Watch the muted video. If you are satisfied with the final video, then download it to your device.

Conclusion

Sound removers are very helpful tools. You can remove sound and add your desired background sound to it. If you have been struggling and looking for the best background sound removers from videos, then this article is perfect for you. We have talked about different tools to remove sound, both for Mac and Windows. We also discussed an online tool that is very fast and easy.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor.

Numerous effects, footage and audio.

Try It Free Try It Free

02 How to Remove Sound from Video Online

Part 1. How to Remove Sound from Video on Windows and Mac

This is the social media era. People are always uploading and sharing their life. Some people generally referred to as Influencers have adopted social media as their career. Suppose you are one of those, and you want to add a video clip to your content, but the background sound is not satisfying you. The best possible solution to this problem is to delete sound from the video.

If you are facing a similar problem, then this section of the article is for you. We are about to introduce background sound remover. It doesn’t matter if you are a Windows or Mac user; the sound removers work well on both platforms.

Method 1: Wondershare Filmora

The first sound remover from video that we are going to talk about is Wondershare Filmora. This amazing video editor offers a whole different editing world to you. With Filmora video editor, you can create unique videos without sweating. The software has a wide range of effects, transitions, titles, and other editing elements.

Moreover, Filmora offers limitless video editing features. With just a few clicks, you can do motion tracking keyframing. Cool edits like the split-screen are also possible with Filmora. The software is multi-track, drag and drop, and easy to use.

Along with this, Filmora also has audio editing features. From one platform, you can edit video audio and also remove sound. The audio editing lets you add background music, split audio, and also mute clip. You can also use Filmora’s Adjust Audio Volume, Audio Equalizer, and Audio Denoise feature. By following the steps shared below, you can quickly delete sound from video using Wondershare Filmora.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Step 1: Create Project in Filmora

The process to remove sound from video starts when you launch Wondershare Filmora on your respective device. Then, select your desired aspect ratio and hit the ‘New Project’ option to get started.

Step 2: Import Media File

The next step asks you to import the media file from which you plan to remove sound. For this, head to the ‘File’ tab from the top panel. Click on it and select the ‘Import Media’ option. Then click on the ‘Import Media Files.’ As soon as the file is imported, drag and drop it onto the timeline. You can also change the resolution and the frame rate for the media file.

Step 3: Audio Editing

To remove sound from video, the user needs to open the audio menu. For that, right-click on the media file and select the option of ‘Audio.’ A sub-menu will show up on the screen. From that menu, you should choose the ‘Detach Audio’ option. This removes and separates the audio from the video, and it is displayed separately on the timeline.

Step 4: Exporting No Sound Video File

You can right-click on the audio file and delete it. Or else, select the audio file and hit the ‘Delete’ button on the keyboard to delete it. Lastly, you can preview the final file and export it. Select the output format for your video and hit the ‘Export’ button to get the sound-free video.

Method 2: Adobe Premiere Pro

The following background sound remover that we are sharing is Adobe Premiere Pro. The video editor is great to work on both Windows and Mac. Premiere Pro has a very responsive interface. It supports multiple file formats and various video types. It offers Motion Graphics templates along with VR editing and VR rotates sphere.

With Premiere Pro, you can open multiple projects at once and work on them simultaneously. You can switch and lift scenes from one another. The video editing software offers effects, transitions, labels, and other things. You can also remove background sound from videos with the help of Adobe Premiere Pro. If you don’t know how to remove sound from video, then follow the step-by-step guideline shared below.

Step 1: Create New Project

For removing sound from video, start by opening Adobe Premiere Pro. Once its interface appears, you need to create a ‘New Project’ so that you can get started.

Step 2: Import Video File

For the next step, you need to import the media file to Premiere Pro. This could be done by clicking on the ‘File’ option from the top panel. Then, select the ‘Import’ button and browse the media file you want to work with.

Step 3: Drag to Premiere Pro Timeline

Once your file has been imported, drag it to the Project timeline. After that, you need to highlight the clip in the timeline by clicking on it. Now, right-click on the highlighted clip. From the menu list, select the option of ‘Unlink.’ This separates and unlinks the audio from the video file.

Step 4: Delete the Audio

Since the audio is unlinked from the media file, you can now delete that audio file. You simply have to select the audio layer and press the ‘Delete’ key or right-click on the audio and select the ‘Clear’ option from the menu to delete the audio. Your video without sound is now ready to be exported.

Part 2. How to Remove Sound from Video Online

Since we have shared the 2 best sound removers from video for both Mac and Windows, now it’s time to shed light on an online sound remover. Clideo is the platform that you can use to remove sound from your video. The online tool is fast and easy to use for removing sound. Clideo supports a variety of video formats like MP4, AVI, MPG, WMV, and many more.

The tool lets you watch the preview of the video. If the video satisfies you, only then save it to your device. Clideo is compatible with multiple devices, for instance, iOS and Android phones. It also supports Windows and Mac computers. If you want to learn about how to delete sound from video using Clideo, then keep reading.

Step 1: Upload Media File

Start the process by accessing the online sound remover tool, Clideo. Then, you need to upload the media file that you want to work with. For this, you can either click on ‘Choose File’ or browse for the video on your device. Or else, you can also upload from Dropbox or Google Drive.

Step 2: Removing Sound

As the tool removes sound from videos. So, as soon as the video is uploaded, Clideo takes a few seconds to remove the sound and to mute your video.

Step 3: Download the Final Video

Once the sound has been removed, with Clideo, you can preview the result. Watch the muted video. If you are satisfied with the final video, then download it to your device.

Conclusion

Sound removers are very helpful tools. You can remove sound and add your desired background sound to it. If you have been struggling and looking for the best background sound removers from videos, then this article is perfect for you. We have talked about different tools to remove sound, both for Mac and Windows. We also discussed an online tool that is very fast and easy.

Versatile Video Editor - Wondershare Filmora

An easy yet powerful editor.

Numerous effects, footage and audio.

Try It Free Try It Free

Also read: