Beat-Centric Editing Mastery: The Ultimate Guide to Audio and Video Coordination in Final Cut Pro X

How to Edit the Beat and Sync Videos to Music in Final Cut Pro X

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

The amount of video content on the Internet is staggering, as hundreds of hours of videos are uploaded to platforms like YouTube, Vimeo or Twitch every day. Going the extra mile and doing all you can to produce videos that are going to attract the attention of online viewers can prove beneficial for numerous reasons.

Editing videos to the beat of the music in Final Cut Pro and other non-linear video editing apps can be a good way to create potentially viral videos. That’s why in this article we are going to show you how you can sync video to the music beat and make dynamic videos in Final Cut Pro X.

You may also like: How to Make Beats for Your Music Videos

How to Sync Videos to the Beat of a Song in Three Different Ways

Editing a video to the beat of a song requires some previous preparation because you must have all the materials in place before you start adding footage to the FCPX’s timeline. Most importantly the song you choose as a soundtrack for your video needs to have a rhythm you can use to easily sync videos and make cuts so that they match the song’s beat perfectly. So let’s have a look at three different techniques you can use to edit to the beat of a song.

Add Markers Manually and Snap Videos to the Beats of a Song

Once you’ve imported all of your footage into a project you created in FCPX, you should place the song you want to use in your video to the audio track on the timeline. You must then isolate the audio file by either clicking on the Solo icon that looks like headphones on the editor’s timeline, selecting the Solo option from the Clip menu or using the OPTION + S keyboard shortcut.

Play the audio file you isolated and start adding markers at the beats in the songs where you want to make cuts. It is worth noting that you don’t have to add a marker at each beat, and you should listen to the song a few times in order to find perfect spots where you are going to make the cuts. Place the playhead at the beginning of the audio file, click on the Play button, and press the M key to start adding markers. You can count on the beat or tap your foot in order to make keeping up with the pace of the beats easier. Switching to the waveform view can also help you add markers more accurately and reduce the amount of time you have to spend searching for a beat.

Proceed to disable the Solo option after you add all markers to the song, and use the N keyboard shortcut to activate the Snapping feature before you add video clips to the timeline. Afterward, simply arrange the clips in the order you want them to appear in the video and preview the results. If some cuts are not positioned perfectly you can easily readjust them so that they are synced to the beat of the song.

A little complicated for you? Then try Filmora, a beginner-friendly tool, and do it in an easy.

Cut to the Beat and Sync Audio with Video in FCPX

Final Cut Pro X doesn’t allow its users to line up their cuts automatically, which is the reason why you have to go through this process manually. Click on the Titles and Generators icon and then place the Custom generator to the video track on the timeline.

You should then add the song you want to use in your video to the audio track, connect it to the Custom generator and make sure that the duration of these two files matches. Listen to the song a few times before selecting both the generator and the audio file and then hold the Command button and press the B button to make cuts at beats throughout the song.

Drag a video clip from the Media Library and hold it over the section of the Custom generator until you see the Film Strip icon. Drop the video clip and select either the Replace from Start, Replace from End or Replace with Retime to Fit options. Keep adding video clips to this until you replace all parts of the generator with the footage you want to include in your video.

You can also delete cuts you’ve made on the generator by simply selecting the start or the end of a generator clip and pressing the delete button on the keyboard. Choose the Replace with Retime to Fit option in case a video clip is shorter than the segment of the generator you are trying to replace. FCPX will automatically slow down your clip and extend it to fit between two cuts. Optionally, you can use the Trim tool to align your cuts to the beats of the song perfectly, if they are a bit off, before previewing and exporting the video you created.

Click here to learn more about How to Sync Audio and Video in Final Cut Pro X 2021.

Generate Beat Markers Automatically with BeatMark X App

Adding markers to each beat of the song manually can be a painstakingly lengthy process, especially if you would like to create a video that lasts longer than a few minutes. The BeatMark X application offers a solution to this problem for just $3,99. This app analyzes songs, adds markers at the beats and lets you create XML files you can easily import into FCPX.

After installing BeatMark X, you should launch the app and drop the audio file you would like to analyze into the Music File box. Select the project’s frame rate and click on the BeatMark button to start analyzing the song.

The app will identify beats in a song and export an XML file to the same folder in which an audio file you analyzed is located. Head over to FCPX, click on the File menu, expand the Import submenu, choose the XML option and select the file you created with BeatMark X.

A new event that has the same name as the audio file you analyzed will be added to the media library. The event will contain a project, and you just have to open this project in order to see the song as well as the markers placed at every beat of the song. You can then proceed to add the video clips to the project in which the analyzed audio file is located or copy the song to any other project you created in FCPX.

Conclusion

You may wonder, is there any more way to trim audio? Yes, there is, click here to see Best Free Online Audio Trimmers to Trim Audio Easily .

Final Cut Pro X offers several ways to edit videos to the beat of a song, but the amount of time you will have to spend working on such a project depends on the video editing technique you choose. Adding markers manually and adjusting the length of each video clip you want to include in that music video can take a lot of time and effort.

The BeatMark X app can save you a lot of time by adding markers to the beats of your songs, and installing this application on your computer can help you sync videos to music beats in Final Cut Pro X much faster. Which method of editing videos to music in FCPX do you like to use the most? Leave a comment and let us know.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Elevate Your Discord Interaction: Effective Techniques with Voxal Voice Modification

Discord is a fantastic software for communication like instant messaging, content delivery, video calls, voice calls, etc. It supports various operating systems, such as Windows, Mac, Linux, Android, iOS, iPad OS, and web browsers.

Do you know a way to have more fun with Discord? Using Voxal Voice Changer on Discord can double the fun and entertainment. To know more about Voxal voice changer and Discord, read the article below.

Part 1. What Is Voxal Voice Changer?

Part 2. How to Use Voxal Voice Changer on Discord

Part 3. How to Fix Voxal Voice Changer Not Working

Part 4. 3 Best Voxal Voice Changer Alternatives

Try AI Voice Changer

For Win 7 or later (64-bit)

Try AI Voice Changer

For macOS 10.12 or later

Part 1. What Is Voxal Voice Changer?

Who doesn’t like to have fun by changing their voice? Voxal Voice Changer always takes the lead when we talk about voice changers. With this voice changer, you can add different sound effects to either any pre-recorded file or apply different effects in real-time. Interestingly, Voxal Voice Changer also lets its users create and customize voice effects without limits.

For gamers, Voxal Voice Changer is an ideal voice changer. This is because the voice changer is compatible with almost all your favorite gaming platforms. The fact that games are heavy, this voice changer does not interfere with any other running applications because it has a low CPU usage.

Moreover, both Windows and Mac users can use Voxal Voice Changer. Do you want to know some cool about this voice changer? Well, Voxal voice changer also has a text-to-speech tool that is fun to use.

Part 2. How to Use Voxal Voice Changer on Discord

If you have been using Discord for a while now, then you must have noticed that people use different voices like robots, aliens, babies, and whatnot. Are you excited to know the secret behind this? People use voice changers to double the fun. You can also use Voxal on Discord to enjoy. The voice changer has some system requirements that are as follows:

System Requirements

• Windows 10, XP, Vista, 7, 8, 8.1 & 11
• Mac OS X 10.5 & above

Step by Step Guide to Use Voxal Voice Changer on Discord

If you are bored with your normal voice, then change it with voice effects. Let us share the steps for your guidance to use Voxal Voice Changer on Discord.

Step 1: Let’s Download Voxal Voice Changer

If you want to use Voxal on Discord, then start by downloading Voxal Voice Changer from its official website. Once the download is complete, you should install the voice changer on your PC or laptop.

Step 2: Launch Voxal Voice Changer

After the software has been installed, you can now launch it. For this, double click on the Voxal icon; this will lead you to its home screen.

Step 3: Open Discord

Now, you have to open Discord on your PC or laptop. Remember not to close the Voxal Voice changer; let it run in the background. This is how Discord will detect the application running in the background and will let you use Voxal on Discord.

Step 4: Open User Settings

After you have accessed your discord account, head to the bottom left side and hit on the ‘User Settings’ option besides your username. Next, select the ‘Voice and Video’ option from the’ App Settings’ section.

Step 5: Set Input Device

You can change and customize your discord voice from Voice and Video section. Under the ‘Input Device’ category, ‘Default’ is selected. You can hit the down arrow can switch it to the ‘Voxal Voice Changer’ device.

Part 3. How to Fix Voxal Voice Changer Not Working

Is your Voxal voice changer not working? Do not panic; we will be discussing a systematic way to check why the Voxal voice changer is not working. You can follow the fixes shared below:

Proper Installation

The error in working might be because of an installation issue as the software might not be installed correctly. You should reinstall the software, which will resolve the issue. It will also help in establishing a better connection for a better user experience.

Selection of Correct Audio Stream

After a successful installation, if you still face any problem, that is because you are not selecting the correct audio stream. You have to select the correct input device, which in this case is Voxal Voice Changer.

Upgradation and Restarting

If the above discussed are not an issue, then your software might need an upgrade. There might be a pending upgrade that affects the working capacity. Whereas, if you have already upgraded the software, then you should restart it.

Active Microphone

The correct audio system has been selected if the installation is complete, and the software is also up to date. However, you still face any issue with Voxal; then your microphone might not be connected properly. Here are the steps to fix this:

Step 1: After you have launched the Voxal Voice changer, tap on the ‘Tools’ section from the top menu bar and select the option of ‘Options.’

Step 2: A pop-up screen will show up; click on the ‘Open Windows Record Mixer’ next to ‘Preview Recording Device.’

Step 3: Another screen will appear; select your microphone by clicking on it. Now, from the bottom left corner, hit the ‘Properties’ option.

Step 4: From the Microphone Properties Array window, head to the ‘Listen’ tab and select the option of ‘Listen to this device.’ Lastly, hit on the ‘OK’ button in all the windows to close them.

Voice Effects

it is also possible that the Voxal voice changer is not applying any effects to your voice. To get rid of this problem, firstly, make sure that you have selected any voice effect. Secondly, ensure that Voxal is receiving proper signals from your microphone. If this is not the case, close both the programs, first open Voxal voice changer, and then open the program where you plan to add voice effects.

Part 4. 3 Best Voxal Voice Changer Alternatives

Although Voxal Voice Changer is a fantastic platform to use on Discord, other voice changers are equally good like Voxal. If you are excited to learn about the alternatives for Voxal voice changer, then let’s begin.

1. Voicemod

Voicemod can be used as an alternative to Discord and replace the Voxal voice changer. The voice changer modifies your voice online. Importantly, the software is compatible with multiple online games, including Fortnite, PUBG, and Minecraft. Windows users can easily use Voicemod and enjoy great things like online chatting and streaming.

It is compatible with Skype, Discord, VRChat, etc. You can change your voice in real-time with amazing effects like alien, chipmunk, baby, police, and whatnot.

2. Clownfish Voice Changer

Ready to learn about the next alternative? The voice changer that supports multiple applications is Clownfish Voice Changer. The voice changer can change your voice on any application that uses a microphone on your computer. The voice changer does not put much load on your CPU, and it doesn’t affect the performance of the computer.

Clownfish voice changer is available for Windows. Among its different voice effects, some are a robot, baby pitch, female pitch, male pitch, and also Darth Vader. The voice changer supports applications like Viber, Discord, Skype, and TeamSpeak.

3. MorphVox

MorphVox is a famous and leading voice changer because of the wide range of features it offers. The voice changer is available as a free tool, MorphVox Junior, and a paid version is also available called MorphVox Pro. The fact that the voice changer can change your voice in real-time is ideal for online communication like Discord and also gaming.

The software is integrated with various sound effects and background tracks. Along with the integrated voices, you can also record your voices. MorphVox has super-fast chatting technology and delivers the best sound quality.

Final Thoughts

For any person who has been looking for ways to use Voxal on Discord, the article is for you. We have discussed Voxal Voice Changer in detail. We shared ways to fix any issue with the Voxal Voice Changer, and also, we shed light on 3 alternatives for Voxal.

Talking of recorded stream videos, they are rough and require editing. For this, let us suggest an awesome software that takes video editing to a new level. We are talking about Wondershare Filmora Video Editor .

You can color match, do split-screen, keyframing, motion tracking, and many more features are offered by Filmora. You can also get various effects, transitions, and elements from its media library.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try AI Voice Changer

For Win 7 or later (64-bit)

Try AI Voice Changer

For macOS 10.12 or later

Part 1. What Is Voxal Voice Changer?

Who doesn’t like to have fun by changing their voice? Voxal Voice Changer always takes the lead when we talk about voice changers. With this voice changer, you can add different sound effects to either any pre-recorded file or apply different effects in real-time. Interestingly, Voxal Voice Changer also lets its users create and customize voice effects without limits.

For gamers, Voxal Voice Changer is an ideal voice changer. This is because the voice changer is compatible with almost all your favorite gaming platforms. The fact that games are heavy, this voice changer does not interfere with any other running applications because it has a low CPU usage.

Moreover, both Windows and Mac users can use Voxal Voice Changer. Do you want to know some cool about this voice changer? Well, Voxal voice changer also has a text-to-speech tool that is fun to use.

Part 2. How to Use Voxal Voice Changer on Discord

If you have been using Discord for a while now, then you must have noticed that people use different voices like robots, aliens, babies, and whatnot. Are you excited to know the secret behind this? People use voice changers to double the fun. You can also use Voxal on Discord to enjoy. The voice changer has some system requirements that are as follows:

System Requirements

• Windows 10, XP, Vista, 7, 8, 8.1 & 11
• Mac OS X 10.5 & above

Step by Step Guide to Use Voxal Voice Changer on Discord

If you are bored with your normal voice, then change it with voice effects. Let us share the steps for your guidance to use Voxal Voice Changer on Discord.

Step 1: Let’s Download Voxal Voice Changer

If you want to use Voxal on Discord, then start by downloading Voxal Voice Changer from its official website. Once the download is complete, you should install the voice changer on your PC or laptop.

Step 2: Launch Voxal Voice Changer

After the software has been installed, you can now launch it. For this, double click on the Voxal icon; this will lead you to its home screen.

Step 3: Open Discord

Now, you have to open Discord on your PC or laptop. Remember not to close the Voxal Voice changer; let it run in the background. This is how Discord will detect the application running in the background and will let you use Voxal on Discord.

Step 4: Open User Settings

After you have accessed your discord account, head to the bottom left side and hit on the ‘User Settings’ option besides your username. Next, select the ‘Voice and Video’ option from the’ App Settings’ section.

Step 5: Set Input Device

You can change and customize your discord voice from Voice and Video section. Under the ‘Input Device’ category, ‘Default’ is selected. You can hit the down arrow can switch it to the ‘Voxal Voice Changer’ device.

Part 3. How to Fix Voxal Voice Changer Not Working

Is your Voxal voice changer not working? Do not panic; we will be discussing a systematic way to check why the Voxal voice changer is not working. You can follow the fixes shared below:

Proper Installation

The error in working might be because of an installation issue as the software might not be installed correctly. You should reinstall the software, which will resolve the issue. It will also help in establishing a better connection for a better user experience.

Selection of Correct Audio Stream

After a successful installation, if you still face any problem, that is because you are not selecting the correct audio stream. You have to select the correct input device, which in this case is Voxal Voice Changer.

Upgradation and Restarting

If the above discussed are not an issue, then your software might need an upgrade. There might be a pending upgrade that affects the working capacity. Whereas, if you have already upgraded the software, then you should restart it.

Active Microphone

The correct audio system has been selected if the installation is complete, and the software is also up to date. However, you still face any issue with Voxal; then your microphone might not be connected properly. Here are the steps to fix this:

Step 1: After you have launched the Voxal Voice changer, tap on the ‘Tools’ section from the top menu bar and select the option of ‘Options.’

Step 2: A pop-up screen will show up; click on the ‘Open Windows Record Mixer’ next to ‘Preview Recording Device.’

Step 3: Another screen will appear; select your microphone by clicking on it. Now, from the bottom left corner, hit the ‘Properties’ option.

Step 4: From the Microphone Properties Array window, head to the ‘Listen’ tab and select the option of ‘Listen to this device.’ Lastly, hit on the ‘OK’ button in all the windows to close them.

Voice Effects

it is also possible that the Voxal voice changer is not applying any effects to your voice. To get rid of this problem, firstly, make sure that you have selected any voice effect. Secondly, ensure that Voxal is receiving proper signals from your microphone. If this is not the case, close both the programs, first open Voxal voice changer, and then open the program where you plan to add voice effects.

Part 4. 3 Best Voxal Voice Changer Alternatives

Although Voxal Voice Changer is a fantastic platform to use on Discord, other voice changers are equally good like Voxal. If you are excited to learn about the alternatives for Voxal voice changer, then let’s begin.

1. Voicemod

Voicemod can be used as an alternative to Discord and replace the Voxal voice changer. The voice changer modifies your voice online. Importantly, the software is compatible with multiple online games, including Fortnite, PUBG, and Minecraft. Windows users can easily use Voicemod and enjoy great things like online chatting and streaming.

It is compatible with Skype, Discord, VRChat, etc. You can change your voice in real-time with amazing effects like alien, chipmunk, baby, police, and whatnot.

2. Clownfish Voice Changer

Ready to learn about the next alternative? The voice changer that supports multiple applications is Clownfish Voice Changer. The voice changer can change your voice on any application that uses a microphone on your computer. The voice changer does not put much load on your CPU, and it doesn’t affect the performance of the computer.

Clownfish voice changer is available for Windows. Among its different voice effects, some are a robot, baby pitch, female pitch, male pitch, and also Darth Vader. The voice changer supports applications like Viber, Discord, Skype, and TeamSpeak.

3. MorphVox

MorphVox is a famous and leading voice changer because of the wide range of features it offers. The voice changer is available as a free tool, MorphVox Junior, and a paid version is also available called MorphVox Pro. The fact that the voice changer can change your voice in real-time is ideal for online communication like Discord and also gaming.

The software is integrated with various sound effects and background tracks. Along with the integrated voices, you can also record your voices. MorphVox has super-fast chatting technology and delivers the best sound quality.

Final Thoughts

For any person who has been looking for ways to use Voxal on Discord, the article is for you. We have discussed Voxal Voice Changer in detail. We shared ways to fix any issue with the Voxal Voice Changer, and also, we shed light on 3 alternatives for Voxal.

Talking of recorded stream videos, they are rough and require editing. For this, let us suggest an awesome software that takes video editing to a new level. We are talking about Wondershare Filmora Video Editor .

You can color match, do split-screen, keyframing, motion tracking, and many more features are offered by Filmora. You can also get various effects, transitions, and elements from its media library.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try AI Voice Changer

For Win 7 or later (64-bit)

Try AI Voice Changer

For macOS 10.12 or later

Part 1. What Is Voxal Voice Changer?

Who doesn’t like to have fun by changing their voice? Voxal Voice Changer always takes the lead when we talk about voice changers. With this voice changer, you can add different sound effects to either any pre-recorded file or apply different effects in real-time. Interestingly, Voxal Voice Changer also lets its users create and customize voice effects without limits.

For gamers, Voxal Voice Changer is an ideal voice changer. This is because the voice changer is compatible with almost all your favorite gaming platforms. The fact that games are heavy, this voice changer does not interfere with any other running applications because it has a low CPU usage.

Moreover, both Windows and Mac users can use Voxal Voice Changer. Do you want to know some cool about this voice changer? Well, Voxal voice changer also has a text-to-speech tool that is fun to use.

Part 2. How to Use Voxal Voice Changer on Discord

If you have been using Discord for a while now, then you must have noticed that people use different voices like robots, aliens, babies, and whatnot. Are you excited to know the secret behind this? People use voice changers to double the fun. You can also use Voxal on Discord to enjoy. The voice changer has some system requirements that are as follows:

System Requirements

• Windows 10, XP, Vista, 7, 8, 8.1 & 11
• Mac OS X 10.5 & above

Step by Step Guide to Use Voxal Voice Changer on Discord

If you are bored with your normal voice, then change it with voice effects. Let us share the steps for your guidance to use Voxal Voice Changer on Discord.

Step 1: Let’s Download Voxal Voice Changer

If you want to use Voxal on Discord, then start by downloading Voxal Voice Changer from its official website. Once the download is complete, you should install the voice changer on your PC or laptop.

Step 2: Launch Voxal Voice Changer

After the software has been installed, you can now launch it. For this, double click on the Voxal icon; this will lead you to its home screen.

Step 3: Open Discord

Now, you have to open Discord on your PC or laptop. Remember not to close the Voxal Voice changer; let it run in the background. This is how Discord will detect the application running in the background and will let you use Voxal on Discord.

Step 4: Open User Settings

After you have accessed your discord account, head to the bottom left side and hit on the ‘User Settings’ option besides your username. Next, select the ‘Voice and Video’ option from the’ App Settings’ section.

Step 5: Set Input Device

You can change and customize your discord voice from Voice and Video section. Under the ‘Input Device’ category, ‘Default’ is selected. You can hit the down arrow can switch it to the ‘Voxal Voice Changer’ device.

Part 3. How to Fix Voxal Voice Changer Not Working

Is your Voxal voice changer not working? Do not panic; we will be discussing a systematic way to check why the Voxal voice changer is not working. You can follow the fixes shared below:

Proper Installation

The error in working might be because of an installation issue as the software might not be installed correctly. You should reinstall the software, which will resolve the issue. It will also help in establishing a better connection for a better user experience.

Selection of Correct Audio Stream

After a successful installation, if you still face any problem, that is because you are not selecting the correct audio stream. You have to select the correct input device, which in this case is Voxal Voice Changer.

Upgradation and Restarting

If the above discussed are not an issue, then your software might need an upgrade. There might be a pending upgrade that affects the working capacity. Whereas, if you have already upgraded the software, then you should restart it.

Active Microphone

The correct audio system has been selected if the installation is complete, and the software is also up to date. However, you still face any issue with Voxal; then your microphone might not be connected properly. Here are the steps to fix this:

Step 1: After you have launched the Voxal Voice changer, tap on the ‘Tools’ section from the top menu bar and select the option of ‘Options.’

Step 2: A pop-up screen will show up; click on the ‘Open Windows Record Mixer’ next to ‘Preview Recording Device.’

Step 3: Another screen will appear; select your microphone by clicking on it. Now, from the bottom left corner, hit the ‘Properties’ option.

Step 4: From the Microphone Properties Array window, head to the ‘Listen’ tab and select the option of ‘Listen to this device.’ Lastly, hit on the ‘OK’ button in all the windows to close them.

Voice Effects

it is also possible that the Voxal voice changer is not applying any effects to your voice. To get rid of this problem, firstly, make sure that you have selected any voice effect. Secondly, ensure that Voxal is receiving proper signals from your microphone. If this is not the case, close both the programs, first open Voxal voice changer, and then open the program where you plan to add voice effects.

Part 4. 3 Best Voxal Voice Changer Alternatives

Although Voxal Voice Changer is a fantastic platform to use on Discord, other voice changers are equally good like Voxal. If you are excited to learn about the alternatives for Voxal voice changer, then let’s begin.

1. Voicemod

Voicemod can be used as an alternative to Discord and replace the Voxal voice changer. The voice changer modifies your voice online. Importantly, the software is compatible with multiple online games, including Fortnite, PUBG, and Minecraft. Windows users can easily use Voicemod and enjoy great things like online chatting and streaming.

It is compatible with Skype, Discord, VRChat, etc. You can change your voice in real-time with amazing effects like alien, chipmunk, baby, police, and whatnot.

2. Clownfish Voice Changer

Ready to learn about the next alternative? The voice changer that supports multiple applications is Clownfish Voice Changer. The voice changer can change your voice on any application that uses a microphone on your computer. The voice changer does not put much load on your CPU, and it doesn’t affect the performance of the computer.

Clownfish voice changer is available for Windows. Among its different voice effects, some are a robot, baby pitch, female pitch, male pitch, and also Darth Vader. The voice changer supports applications like Viber, Discord, Skype, and TeamSpeak.

3. MorphVox

MorphVox is a famous and leading voice changer because of the wide range of features it offers. The voice changer is available as a free tool, MorphVox Junior, and a paid version is also available called MorphVox Pro. The fact that the voice changer can change your voice in real-time is ideal for online communication like Discord and also gaming.

The software is integrated with various sound effects and background tracks. Along with the integrated voices, you can also record your voices. MorphVox has super-fast chatting technology and delivers the best sound quality.

Final Thoughts

For any person who has been looking for ways to use Voxal on Discord, the article is for you. We have discussed Voxal Voice Changer in detail. We shared ways to fix any issue with the Voxal Voice Changer, and also, we shed light on 3 alternatives for Voxal.

Talking of recorded stream videos, they are rough and require editing. For this, let us suggest an awesome software that takes video editing to a new level. We are talking about Wondershare Filmora Video Editor .

You can color match, do split-screen, keyframing, motion tracking, and many more features are offered by Filmora. You can also get various effects, transitions, and elements from its media library.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try AI Voice Changer

For Win 7 or later (64-bit)

Try AI Voice Changer

For macOS 10.12 or later

Part 1. What Is Voxal Voice Changer?

Who doesn’t like to have fun by changing their voice? Voxal Voice Changer always takes the lead when we talk about voice changers. With this voice changer, you can add different sound effects to either any pre-recorded file or apply different effects in real-time. Interestingly, Voxal Voice Changer also lets its users create and customize voice effects without limits.

For gamers, Voxal Voice Changer is an ideal voice changer. This is because the voice changer is compatible with almost all your favorite gaming platforms. The fact that games are heavy, this voice changer does not interfere with any other running applications because it has a low CPU usage.

Moreover, both Windows and Mac users can use Voxal Voice Changer. Do you want to know some cool about this voice changer? Well, Voxal voice changer also has a text-to-speech tool that is fun to use.

Part 2. How to Use Voxal Voice Changer on Discord

If you have been using Discord for a while now, then you must have noticed that people use different voices like robots, aliens, babies, and whatnot. Are you excited to know the secret behind this? People use voice changers to double the fun. You can also use Voxal on Discord to enjoy. The voice changer has some system requirements that are as follows:

System Requirements

• Windows 10, XP, Vista, 7, 8, 8.1 & 11
• Mac OS X 10.5 & above

Step by Step Guide to Use Voxal Voice Changer on Discord

If you are bored with your normal voice, then change it with voice effects. Let us share the steps for your guidance to use Voxal Voice Changer on Discord.

Step 1: Let’s Download Voxal Voice Changer

If you want to use Voxal on Discord, then start by downloading Voxal Voice Changer from its official website. Once the download is complete, you should install the voice changer on your PC or laptop.

Step 2: Launch Voxal Voice Changer

After the software has been installed, you can now launch it. For this, double click on the Voxal icon; this will lead you to its home screen.

Step 3: Open Discord

Now, you have to open Discord on your PC or laptop. Remember not to close the Voxal Voice changer; let it run in the background. This is how Discord will detect the application running in the background and will let you use Voxal on Discord.

Step 4: Open User Settings

After you have accessed your discord account, head to the bottom left side and hit on the ‘User Settings’ option besides your username. Next, select the ‘Voice and Video’ option from the’ App Settings’ section.

Step 5: Set Input Device

You can change and customize your discord voice from Voice and Video section. Under the ‘Input Device’ category, ‘Default’ is selected. You can hit the down arrow can switch it to the ‘Voxal Voice Changer’ device.

Part 3. How to Fix Voxal Voice Changer Not Working

Is your Voxal voice changer not working? Do not panic; we will be discussing a systematic way to check why the Voxal voice changer is not working. You can follow the fixes shared below:

Proper Installation

The error in working might be because of an installation issue as the software might not be installed correctly. You should reinstall the software, which will resolve the issue. It will also help in establishing a better connection for a better user experience.

Selection of Correct Audio Stream

After a successful installation, if you still face any problem, that is because you are not selecting the correct audio stream. You have to select the correct input device, which in this case is Voxal Voice Changer.

Upgradation and Restarting

If the above discussed are not an issue, then your software might need an upgrade. There might be a pending upgrade that affects the working capacity. Whereas, if you have already upgraded the software, then you should restart it.

Active Microphone

The correct audio system has been selected if the installation is complete, and the software is also up to date. However, you still face any issue with Voxal; then your microphone might not be connected properly. Here are the steps to fix this:

Step 1: After you have launched the Voxal Voice changer, tap on the ‘Tools’ section from the top menu bar and select the option of ‘Options.’

Step 2: A pop-up screen will show up; click on the ‘Open Windows Record Mixer’ next to ‘Preview Recording Device.’

Step 3: Another screen will appear; select your microphone by clicking on it. Now, from the bottom left corner, hit the ‘Properties’ option.

Step 4: From the Microphone Properties Array window, head to the ‘Listen’ tab and select the option of ‘Listen to this device.’ Lastly, hit on the ‘OK’ button in all the windows to close them.

Voice Effects

it is also possible that the Voxal voice changer is not applying any effects to your voice. To get rid of this problem, firstly, make sure that you have selected any voice effect. Secondly, ensure that Voxal is receiving proper signals from your microphone. If this is not the case, close both the programs, first open Voxal voice changer, and then open the program where you plan to add voice effects.

Part 4. 3 Best Voxal Voice Changer Alternatives

Although Voxal Voice Changer is a fantastic platform to use on Discord, other voice changers are equally good like Voxal. If you are excited to learn about the alternatives for Voxal voice changer, then let’s begin.

1. Voicemod

Voicemod can be used as an alternative to Discord and replace the Voxal voice changer. The voice changer modifies your voice online. Importantly, the software is compatible with multiple online games, including Fortnite, PUBG, and Minecraft. Windows users can easily use Voicemod and enjoy great things like online chatting and streaming.

It is compatible with Skype, Discord, VRChat, etc. You can change your voice in real-time with amazing effects like alien, chipmunk, baby, police, and whatnot.

2. Clownfish Voice Changer

Ready to learn about the next alternative? The voice changer that supports multiple applications is Clownfish Voice Changer. The voice changer can change your voice on any application that uses a microphone on your computer. The voice changer does not put much load on your CPU, and it doesn’t affect the performance of the computer.

Clownfish voice changer is available for Windows. Among its different voice effects, some are a robot, baby pitch, female pitch, male pitch, and also Darth Vader. The voice changer supports applications like Viber, Discord, Skype, and TeamSpeak.

3. MorphVox

MorphVox is a famous and leading voice changer because of the wide range of features it offers. The voice changer is available as a free tool, MorphVox Junior, and a paid version is also available called MorphVox Pro. The fact that the voice changer can change your voice in real-time is ideal for online communication like Discord and also gaming.

The software is integrated with various sound effects and background tracks. Along with the integrated voices, you can also record your voices. MorphVox has super-fast chatting technology and delivers the best sound quality.

Final Thoughts

For any person who has been looking for ways to use Voxal on Discord, the article is for you. We have discussed Voxal Voice Changer in detail. We shared ways to fix any issue with the Voxal Voice Changer, and also, we shed light on 3 alternatives for Voxal.

Talking of recorded stream videos, they are rough and require editing. For this, let us suggest an awesome software that takes video editing to a new level. We are talking about Wondershare Filmora Video Editor .

You can color match, do split-screen, keyframing, motion tracking, and many more features are offered by Filmora. You can also get various effects, transitions, and elements from its media library.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Uniting Visuals and Vocals: Decomposing Media Files in iMovie for macOS

How to Separate Audio from Video in iMovie on Mac?

Liza Brown

Oct 26, 2023• Proven solutions

Apple’s video editing program, iMovie, is a popular choice. By removing background noise and raising audio levels of quiet clips, iMovie may likewise modify and enhance the audio of a project.

iMovie gives you the basic, no-frills editing tools you need to make a movie out of a collection of video clips. Without using videotape, you can easily browse from scene to scene and save your edits and changes in digital format. The end product is a high-quality digital video movie that you can save as a QuickTime file or dump back to digital videotape.

Now let’s look at how to separate audio from video in iMovie on Mac.

• Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac
• Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie
• Part 3. FAQs about Separating Audio from Video in iMovie

Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac

The iMovie program is capable of producing high-quality movies and videos. If you’re dealing with a video that includes both sound and pictures, you may want to split the two at some point.

To separate audio from video in iMovie on Mac, just open the video and follow the steps below.

Step 1. Remove the audio clip from the video

In your iMovie timeline, find the clip that contains both video and audio.

Right-click the clip or hold Control and click it. You can also go to the menu bar and choose Detach Audio.

The audio from that clip will then show as its own “clip” in green below the video. The little line on the left, however, confirms that the video and audio are still connected. This implies that if you delete the video, you’ll lose the audio as well. As a result, you’ll either need to move the audio clip somewhere else in your video or place it in the Background Music Well at the bottom of the timeline.

Simply select, drag, and drop the green audio clip where you want it. It will be in the background of all other noises in your movie if you set it in the Background Music Well.

Step 2. Get rid of the video

You can remove the video by clicking it and utilizing one of these techniques after you disconnect the audio and unlink it from the video.

Select Delete from the shortcut menu by right-clicking.

Or hold Control while clicking and selecting Delete.

Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie

Want to extract the music file from a video clip’s audio and visual tracks? Or do you want to add another audio file to the video frame? In this part, you’ll learn how to easily separate audio from video and create your own MP3s with iMovie’s alternative - Wondershare Filmora. It’s a powerful video editing software available on both Mac and Windows.

You can make your own MP3 file of the amazing piece of music for enjoyment on the move, whether it’s from a music video, TV show, or concert footage. To separate your audio from your video, follow the steps outlined below.

Step 1. Import your media files into Filmora

To enter the editing mode, run the software and select the 16:9 or 4:3 ratio that best suits your demands. Then select Import to import video clips, audio, or photographs from your computer’s file folder.

It’s worth noting that this tool is highly compatible with a variety of formats, allowing you to edit them frame by frame while maintaining the original quality. Drag and drop videos onto the timeline after they’ve been imported. All files in the timeline are combined without any gaps by default.

Step 2. Separate the audio and video with a single click

Select “Detach Audio” from the context menu of the video file from which you wish to extract the audio track. You’ll see an audio file appearing on the audio track right away. Yes, this is the source video’s actual audio file.

You’ve successfully detached the audio track from the video file.

Step 3. Save the video or audio that has been split

Because the audio and video tracks have been split, you may simply delete the audio or video track you don’t need and replace it with the new one. Then press “Export” to save the audio track as an MP3 file, or go straight to the “iPod” preset to listen on the move.

You should first save the split video frame or audio track to a project file on your hard disk if you wish to save it separately in a new file. Reload the project file that contains the video frame after you’ve finished exporting the audio track, and then export it to a new video file.

Part 3. FAQs about Separating Audio from Video in iMovie

To learn more about separating audio from video in iMovie, you can check the FAQs below.

1. Is it possible to split audio and video in iMovie?

Yes, you certainly can. Select the video clip you want to separate after you’ve imported it into iMovie. Select “Detach Audio” from the context menu by right-clicking. You can now remove one of the tracks (audio or video), relocate it to a different location in the movie timeline, or alter it.

2. In iMovie, what does “detach audio” do?

The video clip’s audio is deleted, and an audio-only clip (with a green bar) is inserted below the video clip. The audio clip can now be linked to any other clip in your movie, or it can be relocated to the background music section.

3. How can I remove the original audio (from the camera) and lock the new audio to the video so that I don’t have to deal with two different parts (video and audio) when editing?

Make a movie in iMovie that simply mixes all the audio and visuals. You can align the video by listening to it or looking at the waveforms. After it’s all lined up, go into the clip inspector and turn off the video track’s volume. To maintain as much quality as feasible, SHARE/EXPORT using QuickTime and choose Apple Intermediate Codec as your codec. This will link the secondary audio and video tracks together. Now, into an Event, import the movie you just made in iMovie. You may now combine audio and video editing.

4. Is it feasible to simply take the video’s audio and save it as a sound file?

If you have other clips in the timeline, you can detach the audio and copy and paste it around, but if you want all the audio from a clip or set of clips, put them in a project and make a custom QT export and export “Sound to AIFF file”. Drag that into another movie clip or import it as an audio track in iTunes.

5. How do I get the audio from the clip to detach so that I may remove it and record fresh audio over it?

Only in the project timeline, not in the event pane, can you disconnect audio from a clip.

6. In iMovie for Mac, how can I mute a video?

Click the Create New button in iMovie to start a new project. From the resulting dropdown menu, pick Movie. Select the video you wish to mute by clicking the Import Media option. Drag and drop the video onto the timeline once it’s been imported. Right-click on the video in the timeline and choose Detach Audio from the dropdown menu.

The audio and video will be separated or detached as a result of this. Remove the audio from the video that you separated or disconnected in the previous step. The audio file (or layer) is located just beneath the video file on your timeline. Then you can either delete it by right-clicking on it and selecting Delete from the dropdown menu, or by simply clicking on it. It will be highlighted in yellow to indicate that it has been selected. And then press the delete key.

7. How do I view and download a preview?

By clicking the play button next to the Share button, you may see a preview of the video. The video can then be downloaded to your computer by selecting Download Video from the dropdown menu after hitting the Publish button.

Alternatively, you can share it directly from the app to other social media platforms. Apart from removing audio from videos, Animaker also includes other video editing tools that you’ll need to modify your videos for social media and your website.

Wrap Up

As seen in this instructional article, iMovie has countless amazing features as a video editor on Mac . Separating audio from a video is one of those interesting features on iMovie.

If a video has music, sounds, or voices that you’d like to separate from the video, following the above-listed steps is an easy way to do just that. One thing to always remember is to keep the app open while exporting.

And if iMovie can’t meet your need, don’t worry. Wondershare Filmora can be your better choice.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Oct 26, 2023• Proven solutions

Apple’s video editing program, iMovie, is a popular choice. By removing background noise and raising audio levels of quiet clips, iMovie may likewise modify and enhance the audio of a project.

iMovie gives you the basic, no-frills editing tools you need to make a movie out of a collection of video clips. Without using videotape, you can easily browse from scene to scene and save your edits and changes in digital format. The end product is a high-quality digital video movie that you can save as a QuickTime file or dump back to digital videotape.

Now let’s look at how to separate audio from video in iMovie on Mac.

• Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac
• Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie
• Part 3. FAQs about Separating Audio from Video in iMovie

Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac

The iMovie program is capable of producing high-quality movies and videos. If you’re dealing with a video that includes both sound and pictures, you may want to split the two at some point.

To separate audio from video in iMovie on Mac, just open the video and follow the steps below.

Step 1. Remove the audio clip from the video

In your iMovie timeline, find the clip that contains both video and audio.

Right-click the clip or hold Control and click it. You can also go to the menu bar and choose Detach Audio.

The audio from that clip will then show as its own “clip” in green below the video. The little line on the left, however, confirms that the video and audio are still connected. This implies that if you delete the video, you’ll lose the audio as well. As a result, you’ll either need to move the audio clip somewhere else in your video or place it in the Background Music Well at the bottom of the timeline.

Simply select, drag, and drop the green audio clip where you want it. It will be in the background of all other noises in your movie if you set it in the Background Music Well.

Step 2. Get rid of the video

You can remove the video by clicking it and utilizing one of these techniques after you disconnect the audio and unlink it from the video.

Select Delete from the shortcut menu by right-clicking.

Or hold Control while clicking and selecting Delete.

Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie

Want to extract the music file from a video clip’s audio and visual tracks? Or do you want to add another audio file to the video frame? In this part, you’ll learn how to easily separate audio from video and create your own MP3s with iMovie’s alternative - Wondershare Filmora. It’s a powerful video editing software available on both Mac and Windows.

You can make your own MP3 file of the amazing piece of music for enjoyment on the move, whether it’s from a music video, TV show, or concert footage. To separate your audio from your video, follow the steps outlined below.

Step 1. Import your media files into Filmora

To enter the editing mode, run the software and select the 16:9 or 4:3 ratio that best suits your demands. Then select Import to import video clips, audio, or photographs from your computer’s file folder.

It’s worth noting that this tool is highly compatible with a variety of formats, allowing you to edit them frame by frame while maintaining the original quality. Drag and drop videos onto the timeline after they’ve been imported. All files in the timeline are combined without any gaps by default.

Step 2. Separate the audio and video with a single click

Select “Detach Audio” from the context menu of the video file from which you wish to extract the audio track. You’ll see an audio file appearing on the audio track right away. Yes, this is the source video’s actual audio file.

You’ve successfully detached the audio track from the video file.

Step 3. Save the video or audio that has been split

Because the audio and video tracks have been split, you may simply delete the audio or video track you don’t need and replace it with the new one. Then press “Export” to save the audio track as an MP3 file, or go straight to the “iPod” preset to listen on the move.

You should first save the split video frame or audio track to a project file on your hard disk if you wish to save it separately in a new file. Reload the project file that contains the video frame after you’ve finished exporting the audio track, and then export it to a new video file.

Part 3. FAQs about Separating Audio from Video in iMovie

To learn more about separating audio from video in iMovie, you can check the FAQs below.

1. Is it possible to split audio and video in iMovie?

Yes, you certainly can. Select the video clip you want to separate after you’ve imported it into iMovie. Select “Detach Audio” from the context menu by right-clicking. You can now remove one of the tracks (audio or video), relocate it to a different location in the movie timeline, or alter it.

2. In iMovie, what does “detach audio” do?

The video clip’s audio is deleted, and an audio-only clip (with a green bar) is inserted below the video clip. The audio clip can now be linked to any other clip in your movie, or it can be relocated to the background music section.

3. How can I remove the original audio (from the camera) and lock the new audio to the video so that I don’t have to deal with two different parts (video and audio) when editing?

Make a movie in iMovie that simply mixes all the audio and visuals. You can align the video by listening to it or looking at the waveforms. After it’s all lined up, go into the clip inspector and turn off the video track’s volume. To maintain as much quality as feasible, SHARE/EXPORT using QuickTime and choose Apple Intermediate Codec as your codec. This will link the secondary audio and video tracks together. Now, into an Event, import the movie you just made in iMovie. You may now combine audio and video editing.

4. Is it feasible to simply take the video’s audio and save it as a sound file?

If you have other clips in the timeline, you can detach the audio and copy and paste it around, but if you want all the audio from a clip or set of clips, put them in a project and make a custom QT export and export “Sound to AIFF file”. Drag that into another movie clip or import it as an audio track in iTunes.

5. How do I get the audio from the clip to detach so that I may remove it and record fresh audio over it?

Only in the project timeline, not in the event pane, can you disconnect audio from a clip.

6. In iMovie for Mac, how can I mute a video?

Click the Create New button in iMovie to start a new project. From the resulting dropdown menu, pick Movie. Select the video you wish to mute by clicking the Import Media option. Drag and drop the video onto the timeline once it’s been imported. Right-click on the video in the timeline and choose Detach Audio from the dropdown menu.

The audio and video will be separated or detached as a result of this. Remove the audio from the video that you separated or disconnected in the previous step. The audio file (or layer) is located just beneath the video file on your timeline. Then you can either delete it by right-clicking on it and selecting Delete from the dropdown menu, or by simply clicking on it. It will be highlighted in yellow to indicate that it has been selected. And then press the delete key.

7. How do I view and download a preview?

By clicking the play button next to the Share button, you may see a preview of the video. The video can then be downloaded to your computer by selecting Download Video from the dropdown menu after hitting the Publish button.

Alternatively, you can share it directly from the app to other social media platforms. Apart from removing audio from videos, Animaker also includes other video editing tools that you’ll need to modify your videos for social media and your website.

Wrap Up

As seen in this instructional article, iMovie has countless amazing features as a video editor on Mac . Separating audio from a video is one of those interesting features on iMovie.

If a video has music, sounds, or voices that you’d like to separate from the video, following the above-listed steps is an easy way to do just that. One thing to always remember is to keep the app open while exporting.

And if iMovie can’t meet your need, don’t worry. Wondershare Filmora can be your better choice.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Oct 26, 2023• Proven solutions

Apple’s video editing program, iMovie, is a popular choice. By removing background noise and raising audio levels of quiet clips, iMovie may likewise modify and enhance the audio of a project.

iMovie gives you the basic, no-frills editing tools you need to make a movie out of a collection of video clips. Without using videotape, you can easily browse from scene to scene and save your edits and changes in digital format. The end product is a high-quality digital video movie that you can save as a QuickTime file or dump back to digital videotape.

Now let’s look at how to separate audio from video in iMovie on Mac.

• Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac
• Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie
• Part 3. FAQs about Separating Audio from Video in iMovie

Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac

The iMovie program is capable of producing high-quality movies and videos. If you’re dealing with a video that includes both sound and pictures, you may want to split the two at some point.

To separate audio from video in iMovie on Mac, just open the video and follow the steps below.

Step 1. Remove the audio clip from the video

In your iMovie timeline, find the clip that contains both video and audio.

Right-click the clip or hold Control and click it. You can also go to the menu bar and choose Detach Audio.

The audio from that clip will then show as its own “clip” in green below the video. The little line on the left, however, confirms that the video and audio are still connected. This implies that if you delete the video, you’ll lose the audio as well. As a result, you’ll either need to move the audio clip somewhere else in your video or place it in the Background Music Well at the bottom of the timeline.

Simply select, drag, and drop the green audio clip where you want it. It will be in the background of all other noises in your movie if you set it in the Background Music Well.

Step 2. Get rid of the video

You can remove the video by clicking it and utilizing one of these techniques after you disconnect the audio and unlink it from the video.

Select Delete from the shortcut menu by right-clicking.

Or hold Control while clicking and selecting Delete.

Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie

Want to extract the music file from a video clip’s audio and visual tracks? Or do you want to add another audio file to the video frame? In this part, you’ll learn how to easily separate audio from video and create your own MP3s with iMovie’s alternative - Wondershare Filmora. It’s a powerful video editing software available on both Mac and Windows.

You can make your own MP3 file of the amazing piece of music for enjoyment on the move, whether it’s from a music video, TV show, or concert footage. To separate your audio from your video, follow the steps outlined below.

Step 1. Import your media files into Filmora

To enter the editing mode, run the software and select the 16:9 or 4:3 ratio that best suits your demands. Then select Import to import video clips, audio, or photographs from your computer’s file folder.

It’s worth noting that this tool is highly compatible with a variety of formats, allowing you to edit them frame by frame while maintaining the original quality. Drag and drop videos onto the timeline after they’ve been imported. All files in the timeline are combined without any gaps by default.

Step 2. Separate the audio and video with a single click

Select “Detach Audio” from the context menu of the video file from which you wish to extract the audio track. You’ll see an audio file appearing on the audio track right away. Yes, this is the source video’s actual audio file.

You’ve successfully detached the audio track from the video file.

Step 3. Save the video or audio that has been split

Because the audio and video tracks have been split, you may simply delete the audio or video track you don’t need and replace it with the new one. Then press “Export” to save the audio track as an MP3 file, or go straight to the “iPod” preset to listen on the move.

You should first save the split video frame or audio track to a project file on your hard disk if you wish to save it separately in a new file. Reload the project file that contains the video frame after you’ve finished exporting the audio track, and then export it to a new video file.

Part 3. FAQs about Separating Audio from Video in iMovie

To learn more about separating audio from video in iMovie, you can check the FAQs below.

1. Is it possible to split audio and video in iMovie?

Yes, you certainly can. Select the video clip you want to separate after you’ve imported it into iMovie. Select “Detach Audio” from the context menu by right-clicking. You can now remove one of the tracks (audio or video), relocate it to a different location in the movie timeline, or alter it.

2. In iMovie, what does “detach audio” do?

The video clip’s audio is deleted, and an audio-only clip (with a green bar) is inserted below the video clip. The audio clip can now be linked to any other clip in your movie, or it can be relocated to the background music section.

3. How can I remove the original audio (from the camera) and lock the new audio to the video so that I don’t have to deal with two different parts (video and audio) when editing?

Make a movie in iMovie that simply mixes all the audio and visuals. You can align the video by listening to it or looking at the waveforms. After it’s all lined up, go into the clip inspector and turn off the video track’s volume. To maintain as much quality as feasible, SHARE/EXPORT using QuickTime and choose Apple Intermediate Codec as your codec. This will link the secondary audio and video tracks together. Now, into an Event, import the movie you just made in iMovie. You may now combine audio and video editing.

4. Is it feasible to simply take the video’s audio and save it as a sound file?

If you have other clips in the timeline, you can detach the audio and copy and paste it around, but if you want all the audio from a clip or set of clips, put them in a project and make a custom QT export and export “Sound to AIFF file”. Drag that into another movie clip or import it as an audio track in iTunes.

5. How do I get the audio from the clip to detach so that I may remove it and record fresh audio over it?

Only in the project timeline, not in the event pane, can you disconnect audio from a clip.

6. In iMovie for Mac, how can I mute a video?

Click the Create New button in iMovie to start a new project. From the resulting dropdown menu, pick Movie. Select the video you wish to mute by clicking the Import Media option. Drag and drop the video onto the timeline once it’s been imported. Right-click on the video in the timeline and choose Detach Audio from the dropdown menu.

The audio and video will be separated or detached as a result of this. Remove the audio from the video that you separated or disconnected in the previous step. The audio file (or layer) is located just beneath the video file on your timeline. Then you can either delete it by right-clicking on it and selecting Delete from the dropdown menu, or by simply clicking on it. It will be highlighted in yellow to indicate that it has been selected. And then press the delete key.

7. How do I view and download a preview?

By clicking the play button next to the Share button, you may see a preview of the video. The video can then be downloaded to your computer by selecting Download Video from the dropdown menu after hitting the Publish button.

Alternatively, you can share it directly from the app to other social media platforms. Apart from removing audio from videos, Animaker also includes other video editing tools that you’ll need to modify your videos for social media and your website.

Wrap Up

As seen in this instructional article, iMovie has countless amazing features as a video editor on Mac . Separating audio from a video is one of those interesting features on iMovie.

If a video has music, sounds, or voices that you’d like to separate from the video, following the above-listed steps is an easy way to do just that. One thing to always remember is to keep the app open while exporting.

And if iMovie can’t meet your need, don’t worry. Wondershare Filmora can be your better choice.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Liza Brown

Oct 26, 2023• Proven solutions

Apple’s video editing program, iMovie, is a popular choice. By removing background noise and raising audio levels of quiet clips, iMovie may likewise modify and enhance the audio of a project.

iMovie gives you the basic, no-frills editing tools you need to make a movie out of a collection of video clips. Without using videotape, you can easily browse from scene to scene and save your edits and changes in digital format. The end product is a high-quality digital video movie that you can save as a QuickTime file or dump back to digital videotape.

Now let’s look at how to separate audio from video in iMovie on Mac.

• Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac
• Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie
• Part 3. FAQs about Separating Audio from Video in iMovie

Part 1. How to Separate/Detach/Split Audio from Video in iMovie on Mac

The iMovie program is capable of producing high-quality movies and videos. If you’re dealing with a video that includes both sound and pictures, you may want to split the two at some point.

To separate audio from video in iMovie on Mac, just open the video and follow the steps below.

Step 1. Remove the audio clip from the video

In your iMovie timeline, find the clip that contains both video and audio.

Right-click the clip or hold Control and click it. You can also go to the menu bar and choose Detach Audio.

The audio from that clip will then show as its own “clip” in green below the video. The little line on the left, however, confirms that the video and audio are still connected. This implies that if you delete the video, you’ll lose the audio as well. As a result, you’ll either need to move the audio clip somewhere else in your video or place it in the Background Music Well at the bottom of the timeline.

Simply select, drag, and drop the green audio clip where you want it. It will be in the background of all other noises in your movie if you set it in the Background Music Well.

Step 2. Get rid of the video

You can remove the video by clicking it and utilizing one of these techniques after you disconnect the audio and unlink it from the video.

Select Delete from the shortcut menu by right-clicking.

Or hold Control while clicking and selecting Delete.

Part 2. Separate Audio from Video on Mac with the Best Alternative to iMovie

Want to extract the music file from a video clip’s audio and visual tracks? Or do you want to add another audio file to the video frame? In this part, you’ll learn how to easily separate audio from video and create your own MP3s with iMovie’s alternative - Wondershare Filmora. It’s a powerful video editing software available on both Mac and Windows.

You can make your own MP3 file of the amazing piece of music for enjoyment on the move, whether it’s from a music video, TV show, or concert footage. To separate your audio from your video, follow the steps outlined below.

Step 1. Import your media files into Filmora

To enter the editing mode, run the software and select the 16:9 or 4:3 ratio that best suits your demands. Then select Import to import video clips, audio, or photographs from your computer’s file folder.

It’s worth noting that this tool is highly compatible with a variety of formats, allowing you to edit them frame by frame while maintaining the original quality. Drag and drop videos onto the timeline after they’ve been imported. All files in the timeline are combined without any gaps by default.

Step 2. Separate the audio and video with a single click

Select “Detach Audio” from the context menu of the video file from which you wish to extract the audio track. You’ll see an audio file appearing on the audio track right away. Yes, this is the source video’s actual audio file.

You’ve successfully detached the audio track from the video file.

Step 3. Save the video or audio that has been split

Because the audio and video tracks have been split, you may simply delete the audio or video track you don’t need and replace it with the new one. Then press “Export” to save the audio track as an MP3 file, or go straight to the “iPod” preset to listen on the move.

You should first save the split video frame or audio track to a project file on your hard disk if you wish to save it separately in a new file. Reload the project file that contains the video frame after you’ve finished exporting the audio track, and then export it to a new video file.

Part 3. FAQs about Separating Audio from Video in iMovie

To learn more about separating audio from video in iMovie, you can check the FAQs below.

1. Is it possible to split audio and video in iMovie?

Yes, you certainly can. Select the video clip you want to separate after you’ve imported it into iMovie. Select “Detach Audio” from the context menu by right-clicking. You can now remove one of the tracks (audio or video), relocate it to a different location in the movie timeline, or alter it.

2. In iMovie, what does “detach audio” do?

The video clip’s audio is deleted, and an audio-only clip (with a green bar) is inserted below the video clip. The audio clip can now be linked to any other clip in your movie, or it can be relocated to the background music section.

3. How can I remove the original audio (from the camera) and lock the new audio to the video so that I don’t have to deal with two different parts (video and audio) when editing?

Make a movie in iMovie that simply mixes all the audio and visuals. You can align the video by listening to it or looking at the waveforms. After it’s all lined up, go into the clip inspector and turn off the video track’s volume. To maintain as much quality as feasible, SHARE/EXPORT using QuickTime and choose Apple Intermediate Codec as your codec. This will link the secondary audio and video tracks together. Now, into an Event, import the movie you just made in iMovie. You may now combine audio and video editing.

4. Is it feasible to simply take the video’s audio and save it as a sound file?

If you have other clips in the timeline, you can detach the audio and copy and paste it around, but if you want all the audio from a clip or set of clips, put them in a project and make a custom QT export and export “Sound to AIFF file”. Drag that into another movie clip or import it as an audio track in iTunes.

5. How do I get the audio from the clip to detach so that I may remove it and record fresh audio over it?

Only in the project timeline, not in the event pane, can you disconnect audio from a clip.

6. In iMovie for Mac, how can I mute a video?

Click the Create New button in iMovie to start a new project. From the resulting dropdown menu, pick Movie. Select the video you wish to mute by clicking the Import Media option. Drag and drop the video onto the timeline once it’s been imported. Right-click on the video in the timeline and choose Detach Audio from the dropdown menu.

The audio and video will be separated or detached as a result of this. Remove the audio from the video that you separated or disconnected in the previous step. The audio file (or layer) is located just beneath the video file on your timeline. Then you can either delete it by right-clicking on it and selecting Delete from the dropdown menu, or by simply clicking on it. It will be highlighted in yellow to indicate that it has been selected. And then press the delete key.

7. How do I view and download a preview?

By clicking the play button next to the Share button, you may see a preview of the video. The video can then be downloaded to your computer by selecting Download Video from the dropdown menu after hitting the Publish button.

Alternatively, you can share it directly from the app to other social media platforms. Apart from removing audio from videos, Animaker also includes other video editing tools that you’ll need to modify your videos for social media and your website.

Wrap Up

As seen in this instructional article, iMovie has countless amazing features as a video editor on Mac . Separating audio from a video is one of those interesting features on iMovie.

If a video has music, sounds, or voices that you’d like to separate from the video, following the above-listed steps is an easy way to do just that. One thing to always remember is to keep the app open while exporting.

And if iMovie can’t meet your need, don’t worry. Wondershare Filmora can be your better choice.

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown

Also read: