5 Essential No-Cost Music Amplitude Scaler Tools

When you are listening to music, or to podcast, or some other type of audio files, would it make it enjoyable if the volume was so low at some point that you couldn’t understand anything? Now add another possibility to this very unpleasant imagination – what if the volume was so high at another point that your ears can’t handle it? – Of course, you would stop listening, and you would also not think high of the creator of this content. In other words, this will become the reason why this creator might lose their audiences. Well, sad story for the creator, isn’t it? And, what if YOU were the creator? A little laziness or a failure in paying attention to detail and your content goes to waste!

So, what is the solution? Of course, a little editing! Even if your voice doesn’t sound like it’s worth listening, you can make it happen by normalizing the volume. This actually is the process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. When this tool is applied to the volume, the whole recording has the same amount of gain across it, every piece is affected the same way, and the relative dynamics are not changed.

With this tool, you have an extra guarantor that people will want to convert to being loyal subscribers, viewers and listeners, because simply, their user experience is now favored, they enjoy a good, edited content.

Actually, we might use audio normalizing when we need to get the maximum volume, but another reason is is when we need to match different volumes.

As in most cases, there is not only one type of audio normalization, so let’s explain what each of them represents: one is a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

With this knowledge in mind, let’s now move to the topic we are going to cover in this article: let’s discuss 5 best free MP3 volume normalizers. Knowing about them will save you time and equip you with the right ways so that when you are going to need audio normalization, you will choose one of them, bypass exhausting process of the research, and find the free, easy-to-use programs that will help you master your sounds!

So, we chose the following programs as 5 best free MP3 normalizers: Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi.

Wondershare Filmora X

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora X , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor, but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora X because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

Adobe Premiere Pro

Adobe Premiere Pro is the industry-leading video editing software, and it is a timeline-based. Premiere Pro always tries to make its use easier and easier, as new features are rolling out regularly to simplify steps and save time. The very same can be said about normalizing audio files, which is actually pretty easy once mastered in a very short time. That is actually why it used by beginners and professionals alike.

To normalize audio Adobe Premiere Pro, first, import your MP3 there. In the timeline, you will see your files in the sequence, in the sound section. Now, the best way to work on them is increase the track height – for that, you need to double-click on the empty space there, next to the little microphone icon.

Now, the track is high, and you can see more of your track. So, say that one of your MP3’s seems very loud, and another is much quieter. Speaking of the loud one, if you can see on the right that there is some red light, it is not a good sign – meaning that audio went above zero (so-called clipping), so you need to avoid it.

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

Max Peak is basically the loudest, highest peak in the audio clip. So, you can write in -3 and click OK, which will ensure the entire audio waveform will have the gain of it adjusted so that the max peak is at -3. You can proceed to the next track and carry out the exact same process on it too. Then, on Audio Meters on the right again, you will be able to see that both tracks (or more, if you have them) peak at -3. In case you have a lot of clips on the timeline, you can select them all, then go to Audio Gain and normalize all of their max peaks simultaneously, which will save you so much time and help you enormously!

VLC Media Player

VLC is a well-known media player, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and can stream from the most successful websites such as Disney+, Hulu, Netflix, and so on.

But there is another magic a simple media player can actually do - we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. It is very simple, so follow these steps:

You need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, click on Save.

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

Find Tools and in the menu, go to Preferences. The window will open, and you need to select All in Show settings – on the bottom left corner of the window. Then, navigate to Audio, and a little below, click on Filters and highlight it. You also need to check the checkbox next to the Dynamic range compressor.

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

Here, concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Attack time and release time can also be very helpful. You can play around with them set them to your liking, and see if it’s better sounding, because actually this will ensure that you have a fluid transition in and out of the scene and there are less sudden, unexpected volume changes.

MP3Gain

MP3Gain is actually the only one in this list which is developed exactly for the task we are discussing in this article. It is an audio normalization software tool. The tool is available on multiple platforms and is free software. It analyzes the MP3 and reversibly changes its volume. The volume can be adjusted for single files or as album where all files would have the same perceived loudness. When applying the tool, there is no quality lost in the change because the program adjusts the mp3 file directly, without decoding and re-encoding.

So, to use this software, go and download MP3Gain. Install and open it when it is ready. You will see that your program is absolutely empty and it has a lot of space inside, waiting for you to upload some file(s)…

Now, you can either choose adding files manually, with you choosing each of them, but let’s say you have an album (which would be more comfortable, needless to say) in which you want to change the volume of all MP3’s. So, in this case, you can choose Add Folder, and when the window opens, choose the folder full of your MP3’s – all your files will be added in the program.

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Powerful multimedia software for creating and editing videos – this is Movavi. It packs lots of video and audio editing power into a simple interface. On their official web-site, the program is described as: “An all-in-one video maker: an editor, converter, screen recorder, and more. Perfect for remote work and distance learning.” So, you can go and download the program, and learn audio normalization there very easily!

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

If the audio is uneven, now double-click on the audio track, which will open the Clip Properties window. You will see the Normalize box, which you need to check. Doing this will even out the sound level for the whole track.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

So, it’s done – now you know a whole lot more about audio normalization, its types, why and when should we use it, and which are the 5 best free MP3 normalizers, along with the detailed guidelines on how to work with those tools to have your desired results. Let’s hope that you will be able to choose from Wondershare Filmora X, Adobe Premiere Pro, VLC Media Player, MP3 Gain and Movavi, and make your user experience so wonderful, and shareable!

Free Download For macOS 10.14 or later

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Adobe Premiere Pro

(If you can not see your audio meters, just go to Window menu and choose Audio Meters).

So, here, our goal is to bring our audio clips around -3 – and for it, it’s possible to bring up and down the white line on the track, but it can be pretty time-consuming actually.

So a better way to do it would be next: click on the track and then right-click, find Audio Gain, and choose Normalize Max Peak to…:

VLC Media Player

What VLC does is just let adjust the general volume, leaving the specifics out of our control.

If you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC, you can do more with the Audio Effects menu:

In the left panel, find Compressor and select it. From now, you can make the changes to the levels as you wish.

MP3Gain

Now, find the Target “Normal” Volume above the files, and fill in the gap, if you will, or just use default dB. Then, click Album Analysis, and the process will start.

The software will show you the volume of each of the file, and then you will need to just click on Track Gain.

Now, wait for the process to be completed, and then you will see that the volumes changed for each of your files – so, it’s done!

Movavi

Install and open the program and then proceed directly to Adding Files. After having chosen your file, you drag and drop it in the timeline sequence.

To save the result, click Export, choose the format, folder and name for your file, and then click Start, so your file can be exported.

The No-Cost Approach to Quieting Down Videos on Your Windows 10 Machine

You might need to remove sound from video windows 10. However, you may be confused about which tools you should you. Indeed, plenty of video editing tools have complicated user interfaces, which is not good if you are a beginner. Fortunately, in this article, we will recommend some of the reliable tools you can use to remove audio from video windows 10—additionally, a simple guide on how to do it.

Method 1: Use online and free solutions to mute audio in videos (500 words)

1. Kapwing

Kapwing is an easy-to-use but powerful online tool for remove sound from video windows 10. Furthermore, Kapwing has many different features you can use for all sorts of things. Such as making videos, adding subtitles to videos, filtering videos, adding watermarks to videos, and many more.

How to mute audio in videos with Kapwing

Step1 To begin, launch your web browser and search the website Kapwing.com. After that, select “Tool” from the menu.

Step2 in the search bar, type “Mute video” and click on it when the mute video feature pops up.

Step3 Click “upload video” in the next window to add the video you want to mute.

Step4 Once you upload your video, click your video, and you will see the volume feature. You just need to drag the volume to the most left to mute the audio.

Step5 Once you mute the movie audio, click “Export project.”

Step6 When the exporting project is done, you can save your video on your computer by clicking “download file.”

2. Veed.io

VEED is a windows video editor remove audio that makes it easy to remove the sound from a video. You can mute the whole video or just a part of it. There’s no software to install. You can do it right in your browser. VEED, on the other hand, is free and very simple to use.

How to remove mute audio from video with VEED.io

Step1 Open your browser and type “Remove audio mute VEED” into the search bar. After that, click “Choose video” to import the video you want to mute.

Step2 When you’re on the editing page, you’ll see a sound icon. Click that, and then drag the sound bar down to remove the sound. Once you remove the sound, click “Export” in the top right of your screen.

Step3 When the video exporting process is done, you can save the video you edited on your computer by clicking “Download.”

3. Adobe Express

Adobe Express is another tool for remove audio from video windows. You can use to remove sound from your videos. has an easy-to-use interface that makes removing sound in a video only a few steps.

How to remove audio from the video with Adobe Express

Step1 Open your browser and search for “Remove audio with Adobe Express”. In the next window, click “Upload your video” to import your video.

Step2 On the next page, you will see your video, and you will see the option “Mute” press that button to remove the sound on your video. Once you remove the audio from your video, click “download” to save your video.

Method 2: Use Filmora to remove audio from video

Step1 Before going any further, you need to download Filmora and open it on your computer. When you’re done, click “new project.”

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Step2 In this step, you need to find the video you want to mute on your computer and import it to Filmora. Then, drag your video onto Filmora’s timeline.

Step3 Once you’ve dragged your video onto Filmora’s timeline, click on your video in the timeline and then right-click. Afterwards, choose “detach audio.”

Step4 Now, you will see the audio track below the video track. Simply, click on the audio track and click the “delete” icon. Finally, you are successful in muting the audio from your video.

Step5 Click “Export” to save your video on your computer.

Beside Filmora allow you to mute audio from entire of the video, Filmora also has another audio modify feature called “Silence detection”. Silence Detection is a special add-on for Filmora users, making it easier to cut out silent parts of a video. Silence Detection is a unique Filmora add-on that makes it easier for users to remove silent pauses from a film. The add-on examines the full video to detect all the silent pauses and eliminates them instantly, saving you time and simplifying the editing process.

How to use silence detection?

Step1 Right-click on the clip in the resource, select the video clip on the timeline, and choose the silence detection option to open up the silence detection window.

Step2 The silent detection tool will automatically detect the silent and low sound points.

Furthermore, you can adjust the parameters to recalculate the silence detection or manually fine-tune what the feature has already detected

once everything sounds good, export the video into the Filmora timeline so you can continue editing your video.

Moreover, Filmora also has another feature called “Audio ducking”. Audio ducking is a way to turn down the volume of the background when one voiceover comes on.

How to use audio ducking with Filmora

Step1 Let’s say you already have your voiceover and the audio in your video. If you want you to use duking voice feature, firstly, you need to decide which part of the audio you want to lower. After that, double-click the selected part until the ducking voice feature comes out.

Step2 Next, you just need to drag the audio ducking bar to the left or right. Indeed, if you drag to the right, it will lower the audio. Once you are done adjusting the audio, click “Ok”, and you can preview the result.

Last but not least, Filmora has other features called TTS and STT. Speech to Text (STT) allows you to transcript voice to subtitles in one click. Using speech-to-text will save you a lot of time on subtitling and speed up the editing process. Meanwhile, Text to Speech (TTS) is a feature in Filmora that lets you turn text files into voiceover and add more elements to your video.

How to use STT with Filmora

Step1 Firstly, right-click on the audio track and choose “Speech-to-Text”.

Step2 In the STT parameter setting bar, you can choose the language of the audio to be transcribed and the files to be converted. You can also choose to match automatically to the timeline.

How to use TTS with Filmore

Step1 Go to the “Tittle” and add you default Title. After that, write anything you want.

Step2 Select the title box in the timeline, then right-click. After that, click on “Text-to-Speech”.

Step3 In the TTS parameter setting bar, choose the language this title is in and the voice’s name.

1. Climpchamp

Clipchamp is an online video editor that makes it easy for anyone to make videos, even if they have never edited before. It lets you combine your videos, images, and audio files, remove audio from the video and then save the finished video to your computer. On the Climpchamp homepage, you can sign up for a free account and start editing your videos right away.

How to mute audio from the video with Climpchamp

Step1 First, open up your browser and search for Climpchamp.com. You must sign up and make an account on the next page first. Please note that creating an account doesn’t cost anything. Once you have an account, you just need to click “Create your first video”.

Step2 In this part, you just need to drag the video file you want to mute into the Clipchamp.

Step3 Once you import your video into Clipchamp. Then, go to “Audio” and simply drag the bar to the most left to remove the audio. When you are done, click “Export” on your top screen.

Step4 When exporting the video is done, click “Save to your computer” to save the video.

Part4: FAQ

Why do we need to mute audio from the video?

Getting rid of the audio from some clips might be necessary for a variety of reasons: perhaps the background noise is too loud, maybe you want to censor something from it, or maybe you simply don’t need it because you plan to use the video as B-roll or play music over it.

Conclusion

Basically, it’s easy to remove sound from video windows 10. You can use the tools mentioned above and follow the step-by-step instructions on how to do it. Out of all the tools listed above, Filmora is the best one to use. Filmora can not only take the sound out of your video but also has many ways to change the sound. Like ducking video or detaching audio

Free Download For macOS 10.14 or later

Step2 In this step, you need to find the video you want to mute on your computer and import it to Filmora. Then, drag your video onto Filmora’s timeline.

Step3 Once you’ve dragged your video onto Filmora’s timeline, click on your video in the timeline and then right-click. Afterwards, choose “detach audio.”

Step4 Now, you will see the audio track below the video track. Simply, click on the audio track and click the “delete” icon. Finally, you are successful in muting the audio from your video.

Step5 Click “Export” to save your video on your computer.

How to use silence detection?

Step1 Right-click on the clip in the resource, select the video clip on the timeline, and choose the silence detection option to open up the silence detection window.

Step2 The silent detection tool will automatically detect the silent and low sound points.

Furthermore, you can adjust the parameters to recalculate the silence detection or manually fine-tune what the feature has already detected

once everything sounds good, export the video into the Filmora timeline so you can continue editing your video.

Moreover, Filmora also has another feature called “Audio ducking”. Audio ducking is a way to turn down the volume of the background when one voiceover comes on.

How to use audio ducking with Filmora

How to use STT with Filmora

Step1 Firstly, right-click on the audio track and choose “Speech-to-Text”.

Step2 In the STT parameter setting bar, you can choose the language of the audio to be transcribed and the files to be converted. You can also choose to match automatically to the timeline.

How to use TTS with Filmore

Step1 Go to the “Tittle” and add you default Title. After that, write anything you want.

Step2 Select the title box in the timeline, then right-click. After that, click on “Text-to-Speech”.

Step3 In the TTS parameter setting bar, choose the language this title is in and the voice’s name.

1. Climpchamp

How to mute audio from the video with Climpchamp

Step2 In this part, you just need to drag the video file you want to mute into the Clipchamp.

Step3 Once you import your video into Clipchamp. Then, go to “Audio” and simply drag the bar to the most left to remove the audio. When you are done, click “Export” on your top screen.

Step4 When exporting the video is done, click “Save to your computer” to save the video.

Part4: FAQ

Why do we need to mute audio from the video?

Conclusion

Sculpting the Visual Narrative: A Composer’s Approach to Transition Craftsmanship

How to Add Video and Audio Transition Between Scenes/Clips

Liza Brown

Mar 27, 2024• Proven solutions

Transition effects appear when one slide/clip replaces another one. It helps make the presentation, slideshow or movie good looking and impressive. Transition effects are widely used in and video editing software, such as Windows Movie Maker, iMovie, DVD Slideshow Builder, etc. You can also use transition sound effects to make amazing videos.

This article will show you how to add transitions (including video and audio transitions) between scenes and clips in Wondershare Filmora . Tips and tricks for transitions are also included.

How to Add Transitions Between clips

Part 1: Add video transitions between clips
Part 2: Add audio transitions between clips

Part 1: Add video transitions

1. Download Wondershare Filmora

Wondershare Filmora is an easy-to-use while powerful video editing tool that is available both on Windows and Mac. Download it from the button below to get started.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

2. Import video/photos to the project

Before adding video/photo files to the Timeline, you need to import them first into the project. There are mainly 2 ways to import video/photo files: “Import” button on primary windows, or dragging and dropping files from Windows File Explorer to the User’s Album. Wondershare Filmora supports all popular video/audio/photo formats, including but not limited to AVI, MP4, MOV, MPEG, MPG, FLV, M4V, WMV, TS, MOD, TOD, VOB, MP3, WMA, M4A, JPG, PNG, BMP, and GIF. Then drag and drop the media files from the Media album to the video track on timline for editing

3. Add transitions between video and photo files

All clips will be played one by one without a gap. But no transition effects will be applied by default. To add transitions, switch to Transition tab and drag any transition to the joint of two clips from almost 200 transitions (when the white box appears, release your mouse). Now, you could also add transition at the end or start of a clip.

You can also change the transition mode among Overlap, Prefix, and Postfix by double-clicking on the transition on timeline

Tips and Tricks for Transition Effects

1. If you want to set the transition duration, it’s better to enlarge the Timeline view through the Zoom in tool or slider above the Timeline. Next, double click the transition thumbnail to open the setting panel and input the time. Click “Apply to All” if you want all transition effects to have the same duration.

2. To delete a transition, highlight it and click the Delete button in the toolbar above Timeline, or press Delete key on the keyboard.

3. If you especially love a transition, you can add it to Favorite by right clicking transition in the list and selecting “Add to Favorites” from the menu.

4Export video with transitions

When you are happy with your video and transition effects, click “Create” to save the video with transitions. You can save video in all popular formats on the computer by clicking “Format” and choosing a format from the list. If you want to play your video on iPod, iPhone, iPad, click “Device” and select a thumbnail of the device. It’s also available to upload your videos to YouTube to share with your friends. To play video on TV, you can burn it to DVD with your DVD burner.

In the end, if you have problems with adding transitions, please click here to get in touch with supporters.

Part 3: Add audio transitions

Filmora also allows you to add transitions between audio files. Using the fade-in and fade-out feature to make your audio process smoontly. With the complete new waveform and audio keyframing. Check this video to see the details about video transition in Filmora.

Download Mac Version ](https://tools.techidaily.com/wondershare/filmora/download/ )

Liza Brown

Liza Brown is a writer and a lover of all things video.

Follow @Liza Brown