“Harmonizing Soundscapes: Advanced Techniques for Audio Normalization in DaVinci Resolve”

How To Normalize Audio In DaVinci Resolve

It happens a lot of times that we are not satisfied with several details our videos and audios contain, and we need to edit them. One of the most common problems we face is that our volumes are not normalized, and we need to take some extra time in order to achieve the best result for our audiences. Even with little or no knowledge about this very specific topic, we need to inform ourselves and find the solutions, make our videos more watch-able and our audios more listen-able, so to say.

There are several ways the audio normalization is achieved. One type is called peak normalization, helping adjust the recording based on the highest signal level present in the recording; the second is loudness normalization, adjusting the recording based on perceived loudness. RMS (Root-Mean-Square) changes the value of all the samples, where their average electrical volume overall is a specified level.

Mostly, there are two reasons why we should give audio normalization a try. You need to decide yourself, what is your reason and expected outcome when you use audio normalization. First is when your aim is to get the maximum volume, but the second boils down to matching different volumes with each other.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

More concretely, in general, audio normalization is when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, “the norm” for the project. It means that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

You can have the desired result using different kinds of software. Nowadays, a lot of programs offer you the tool which facilitates this process. So, one of them would be DaVinci Resolve, which we are going to discuss in this article.

What is DaVinci Resolve? The description goes: “DaVinci Resolve is the world’s only solution that combines editing, color correction, visual effects, motion graphics and audio post production all in one software tool!” so, let’s discover what this software can do to help us balance the audio!

So, how to balance your audio in DaVinci Resolve? We are going to discuss everything step by step – how to set your target loudness level, how to monitor the loudness, and how you can use the automation feature.

Well, of course, have the program installed and opened. Then, add your video with the audio you want to edit or the audio separately, if that’s what you are aiming to do.

The first step you need to make is to set your target loudness level – for this, find the little settings button on the right bottom of the program and click on it. Now, go down to the Fairlight menu and change the Target Loudness Level. If you are doing the audio normalization for the Youtube content, then it is recommended to set it to -14 LUFS.

Next, you are going to head to the Fairlight page and make sure that your meters are open. the loudness meter is on the right top of the layout of the program, and it goes from +9 to -15 LUFS.

Here, zero represents exactly what our target loudness level is, in this case, as you remember, we set it to -14 LUFS. So, ensure that our loudness is as close as zero as possible on the meter, but you can also make it lower, such as -3. Whenever you play, you will be able to see that there are some numbers popping up to the right of the meter.

The first one, you’ll find, is Short – constantly changing, indicating how far above or below the target loudness level you are at a given time. Short Max tells you how far above or below your target loudness level the loudest point of your video is. Range is a measure of your quietest pick to your loudest peak, and the last one is Integrated – it gives you the overall loudness of your video in relation to your target loudness level. Integrated is the number we aim to keep around -3 or 0.

We can use our main slider (next to the sequence on the right) to make our video louder or quieter until we hit that target loudness level.

Also, there is an automation tool that can help you dial in your loudness. In order to access this feature, find a red icon, looking like a wave with kind of a key frames.

Next, open up your Index (on the far top panel, a little bit from the left), and make sure you are in the tracks menu in your editing index.

What you want to do is to make your main track visible on the timeline, so hit on the eyeball next to your main and go to your timeline, where you will expand your main track until you see your Loudness History options.

Here, you will need to check in the box next to Integrated and turn on the Loudness History. This will show the integrated loudness level, adjust your main track’s volume accordingly, so you are below the zero line. And, that’s actually it!

How to normalize audio in Wondershare Filmora X?

Even though doing this with the help of DaVinci Resolve is really helpful, and, let’s say, sophisticated, you might find it a little complicated, in case you were not so familiar with video/audio editing. So, we would like you to have some information about what alternative you can turn to, and in this case, it’s worth bringing up a software - Wondershare Filmora X . With it, you will find that the same task can be carried out wonderfully. It is also a video editor, but it is one of the easiest to use in the word, supported by Mac and Windows. Filmora offers a great, neat, user-friendly interface, and helps you understand the very basics of editing. Actually, it has not been long since Wondershare Filmora X introduced the feature to normalize the audio. So, you might want download the latest version of Filmora X and start following along the steps we are going to provide for you to understand how audio normalization works on Filmora X .

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

After having installed and opened a software, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now, you can see on the graphic that the noises are of different levels from each other. This makes us understand why we need to balance our audio files whenever we are aiming for a good listening experience for our audiences.

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

Now, after clicking on it, you can just wait and the normalization will be completed soon.

When it happens, you will be able to see on the graphics that the volumes are almost on the same level, moreover, listening to it, your ears will “understand” that there is no longer apparent difference between how they sound. So, let’s hope you are happy with the result – in this case, you can save the file you just normalized!

So, in this article, we learned one or two things about normalizing volumes and its types, why and how it is done, and how do it in DaVinci Resolve as well as in Wondershare Filmora X. we hope the guidelines will serve you in the best way and from now on, you will be able to create great sounds!

Free Download For macOS 10.14 or later

After having installed and opened a software, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now, you can see on the graphic that the noises are of different levels from each other. This makes us understand why we need to balance our audio files whenever we are aiming for a good listening experience for our audiences.

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

Now, after clicking on it, you can just wait and the normalization will be completed soon.

When it happens, you will be able to see on the graphics that the volumes are almost on the same level, moreover, listening to it, your ears will “understand” that there is no longer apparent difference between how they sound. So, let’s hope you are happy with the result – in this case, you can save the file you just normalized!

So, in this article, we learned one or two things about normalizing volumes and its types, why and how it is done, and how do it in DaVinci Resolve as well as in Wondershare Filmora X. we hope the guidelines will serve you in the best way and from now on, you will be able to create great sounds!

Tips for Cutting Down Ambient Noise and Reverberation in Audio Tracks

You just finished recording your content and everything seems fine. But when you start editing, you notice echo in your audio with reverberations. This can be so annoying and you will have to publish your content before you remove echo from audio. There are several ways to do this. Some prefer audition echo removal while others are familiar with audacity remove echo tactics. You may also remove echo in Premiere Pro and achieve quality results. This will remove the echo sound in your audio and help achieve better sound clarity. In this article, we explore how you can remove echo from audio using these three main methods and achieve the best results.

AI Vocal Remover A cross-platform for facilitating your video editing process by offering valuable benefits!

Free Download Free Download Learn More

Part 1. How to Remove Echo from Audio in Audacity : A Step-by-Step Guide

Echo in your audio can occur for many reasons. You could be recording a podcast in different locations and working from a home studio. This could naturally create echoes in your audio when microphones pick undesired background noise. When you realize such noises post-production, Audacity may be your solution. Audacity reduces echo and other background sounds with high accuracy. Here are the steps you will need to follow:

Step 1: Start Audacity and Import Audio Files

Visit the Audacity website and download the software if you haven’t already. Do the simple installation process and open the Audacity software on your desktop. Import the audio files that you want to edit by going to File, and then opening or dragging and dropping the files into Audacity.

Step 2: Select Sound Track

Select the track you need to edit by clicking Select on the left side menu. Then choose the file that you want or press CMD+A on Mac or CTRL+A on Windows.

Step 3: Get a Noise Profile

Under the Effect dropdown menu, click Noise Reduction then select Get Noise Profile. This will prepare the track for noise reduction. The window will close immediately after this. Repeat the steps by clicking the Effects Menu, then Noise Reduction, and OK.

Step 4: Replay and Amplify Audio

The waveform of the audio track will change. Replay it to hear the results. Press CMD+Z or CTRL+Z on your to undo the process if not satisfied. Then, repeat the previous steps and play around with different values to achieve a better outcome. When you like the results, the audio volume output will be lower. Click Effects then Amplify to bring the volume back again, and adjust it to the level that you want.

Part 2. How to Remove Echo from Audio in Adobe Audition : A Quick Tutorial

Adobe Audition is an effective editing software that will clean up echoes, winds, reverberations, instruments, and anything in between. The software offers a perfect solution to achieve pleasant audio within minutes.

Step 1: Launch Adobe Audition and Import Files

Start by launching the Audition software on your PC. Then, import the files you want to edit by going to File. Click Menu and select Open to browse the files on your computer.

Step 2: Select Audio File to Edit

You need to select the audio files that you will be removing echo from. Go to the Edit menu, Click Select, and choose Select All. You can also double-click the track.

Step 3: Start the Noise Restoration Menu

Click the Effects Menu, and then the Noise Reduction Restoration. Choose the DeReverb option. This will open the DeReverb window where you can make appropriate adjustments. You also have the option to left-click at the start of the selection. Then drag the dereverb over the part of the track you want to apply it to.

Step 4: Adjust the Amount of DeReverb Effect

Use the slider at the bottom of the DeReverb window to make the adjustments. Drag the slider slowly as you listen to the audio sounds. Be careful not to drag it too far that you start hearing buzzing and clipping. Once satisfied, preview the audio then click Apply and the audio file will be ready.

Part 3. How to Remove Echo from Audio in Premiere Pro : A Quick Guide

The other effective way to remove echoes and reverberation in your audio file is using Premiere Pro. To remove Echo Premiere Pro, you need to add your audio click with Echo and process it with the software. Here is a summary of the steps to follow:

Step 1: Start DeReverb Effect

Start by importing the files that you want to edit to Adobe Premiere Pro. Then drag it into the timeline. On the search box, type DeReverb. You can also click on Audio Effects, followed by Noise Reduction/Restoration, and then DeReverb. Click on the effect and drag it to your clip on the timeline.

Step 2: Setup Your Settings

You should see the new effects under the Effects Control panel. Click the little arrow to the left, followed by Edit to open a new window.

Step 3: Adjust Settings

The new window will display the Clip FX Editor. You will have the option for presents on the top where you can find a default, light, and heavy reverb reduction. Choose one of them and preview it. Adjust the amount of reverb using the slider on the bottom. You can also check the Auto Gain to automatically take care of the volume as you edit the settings. Preview the settings and close the window once satisfied.

Bonus Part. How to Remove Echo from Audio in Wondershare Filmora : A Guided Tutorial

In most cases, you will want to remove echo from audio files to continue editing them further. Probably it is a voiceover for your next YouTube video or even a podcast upload. Wondershare Filmora allows you to do this and more. The versatile video editing software come with some unique features that make audio and video editing a breeze. You even get an AI Copilot that serves as your personal assistant when editing your files.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Vocal Remover

For you to remove echo from your audio files with Filmora, you will need to utilize the AI Vocal Remover feature. The feature is specially designed to separate vocals and music from any song. However, it also allows you to remove other audio elements from your soundtrack, including echoes and wind. You only need to optimize your preferences, and the feature will handle the rest. Here are the few simple steps you will need to follow:

Step 1: Launch Filmora and Create a New Project

First of all, start the Filmora software on your desktop. Then click the “New Project” tab. This will open the Filmora editing space.

Step 2: Import Your Soundtrack or Files

Select the “Media” tab in the toolbar. This will allow you to edit the soundtrack files you want to edit in this project. Click on the “Files” icon and select the files to import. You can also drag and drop the files from your Windows Explorer or Mac’s Finder onto the Filmora media section.

Step 3: Start AI Vocal Remover

Choose the clips you want to remove echoes from in the timeline. Then click on the “Audio” and select “AI Vocal Remover.” Adjust the settings for DeReverb and Wind removal to remove echoes from your audio file. You can also explore Hum removal, AI Speech Enhancement, and Denoise to achieve optimal results.

Conclusion

Echoes in your soundtracks can be so annoying. They affect the clarity of vocals and can make your audio or video seem unprofessional. While there are many ways you can remove echo from audio, we recommend Wondershare Filmora. The versatile video editor comes with a broad choice of features to help you edit your audio more accurately. You can remove echoes, wind, and more while maintaining the same quality of your audio. The software also allows you to continue editing your audio or video further as desired.

Free Download Free Download Learn More

Part 1. How to Remove Echo from Audio in Audacity : A Step-by-Step Guide

Echo in your audio can occur for many reasons. You could be recording a podcast in different locations and working from a home studio. This could naturally create echoes in your audio when microphones pick undesired background noise. When you realize such noises post-production, Audacity may be your solution. Audacity reduces echo and other background sounds with high accuracy. Here are the steps you will need to follow:

Step 1: Start Audacity and Import Audio Files

Visit the Audacity website and download the software if you haven’t already. Do the simple installation process and open the Audacity software on your desktop. Import the audio files that you want to edit by going to File, and then opening or dragging and dropping the files into Audacity.

Step 2: Select Sound Track

Select the track you need to edit by clicking Select on the left side menu. Then choose the file that you want or press CMD+A on Mac or CTRL+A on Windows.

Step 3: Get a Noise Profile

Under the Effect dropdown menu, click Noise Reduction then select Get Noise Profile. This will prepare the track for noise reduction. The window will close immediately after this. Repeat the steps by clicking the Effects Menu, then Noise Reduction, and OK.

Step 4: Replay and Amplify Audio

The waveform of the audio track will change. Replay it to hear the results. Press CMD+Z or CTRL+Z on your to undo the process if not satisfied. Then, repeat the previous steps and play around with different values to achieve a better outcome. When you like the results, the audio volume output will be lower. Click Effects then Amplify to bring the volume back again, and adjust it to the level that you want.

Part 2. How to Remove Echo from Audio in Adobe Audition : A Quick Tutorial

Adobe Audition is an effective editing software that will clean up echoes, winds, reverberations, instruments, and anything in between. The software offers a perfect solution to achieve pleasant audio within minutes.

Step 1: Launch Adobe Audition and Import Files

Start by launching the Audition software on your PC. Then, import the files you want to edit by going to File. Click Menu and select Open to browse the files on your computer.

Click here

Step 2: Select Audio File to Edit

You need to select the audio files that you will be removing echo from. Go to the Edit menu, Click Select, and choose Select All. You can also double-click the track.

Step 3: Start the Noise Restoration Menu

Click the Effects Menu, and then the Noise Reduction Restoration. Choose the DeReverb option. This will open the DeReverb window where you can make appropriate adjustments. You also have the option to left-click at the start of the selection. Then drag the dereverb over the part of the track you want to apply it to.

Step 4: Adjust the Amount of DeReverb Effect

Use the slider at the bottom of the DeReverb window to make the adjustments. Drag the slider slowly as you listen to the audio sounds. Be careful not to drag it too far that you start hearing buzzing and clipping. Once satisfied, preview the audio then click Apply and the audio file will be ready.

Part 3. How to Remove Echo from Audio in Premiere Pro : A Quick Guide

The other effective way to remove echoes and reverberation in your audio file is using Premiere Pro. To remove Echo Premiere Pro, you need to add your audio click with Echo and process it with the software. Here is a summary of the steps to follow:

Step 1: Start DeReverb Effect

Start by importing the files that you want to edit to Adobe Premiere Pro. Then drag it into the timeline. On the search box, type DeReverb. You can also click on Audio Effects, followed by Noise Reduction/Restoration, and then DeReverb. Click on the effect and drag it to your clip on the timeline.

Step 2: Setup Your Settings

You should see the new effects under the Effects Control panel. Click the little arrow to the left, followed by Edit to open a new window.

Step 3: Adjust Settings

The new window will display the Clip FX Editor. You will have the option for presents on the top where you can find a default, light, and heavy reverb reduction. Choose one of them and preview it. Adjust the amount of reverb using the slider on the bottom. You can also check the Auto Gain to automatically take care of the volume as you edit the settings. Preview the settings and close the window once satisfied.

Bonus Part. How to Remove Echo from Audio in Wondershare Filmora : A Guided Tutorial

In most cases, you will want to remove echo from audio files to continue editing them further. Probably it is a voiceover for your next YouTube video or even a podcast upload. Wondershare Filmora allows you to do this and more. The versatile video editing software come with some unique features that make audio and video editing a breeze. You even get an AI Copilot that serves as your personal assistant when editing your files.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

AI Vocal Remover

For you to remove echo from your audio files with Filmora, you will need to utilize the AI Vocal Remover feature. The feature is specially designed to separate vocals and music from any song. However, it also allows you to remove other audio elements from your soundtrack, including echoes and wind. You only need to optimize your preferences, and the feature will handle the rest. Here are the few simple steps you will need to follow:

Step 1: Launch Filmora and Create a New Project

First of all, start the Filmora software on your desktop. Then click the “New Project” tab. This will open the Filmora editing space.

Step 2: Import Your Soundtrack or Files

Select the “Media” tab in the toolbar. This will allow you to edit the soundtrack files you want to edit in this project. Click on the “Files” icon and select the files to import. You can also drag and drop the files from your Windows Explorer or Mac’s Finder onto the Filmora media section.

Step 3: Start AI Vocal Remover

Choose the clips you want to remove echoes from in the timeline. Then click on the “Audio” and select “AI Vocal Remover.” Adjust the settings for DeReverb and Wind removal to remove echoes from your audio file. You can also explore Hum removal, AI Speech Enhancement, and Denoise to achieve optimal results.

Conclusion

Echoes in your soundtracks can be so annoying. They affect the clarity of vocals and can make your audio or video seem unprofessional. While there are many ways you can remove echo from audio, we recommend Wondershare Filmora. The versatile video editor comes with a broad choice of features to help you edit your audio more accurately. You can remove echoes, wind, and more while maintaining the same quality of your audio. The software also allows you to continue editing your audio or video further as desired.

Detailed Examination of Sound Forge’s Functionality

In the music industry, the audio content version has changed drastically. As a result, music production and marketing are growing faster than ever, and only those with proper, updated tools and skills are capable of surviving in this era.

Audio editing tools are in demand for different purposes, such as adding effects to audio and removing pauses from a webinar session. Choosing an audio editor depends on many factors, such as price range, the purpose of using an editor, and skill level. The best editing program can help you get the best audio finishing - MAGIX Sound Forge.

If you are new to the music industry or a professional searching for an audio editor, this article will help you learn everything about Sound Forge.

Part 1. A Quick Verdict of Sound Forge

Sound Forge is one of the best software for professionals, beginners, and enthusiasts due to its simple and essential restoration tools that can help remove unnecessary background noises. However, this music software can remove 70% of the noise, leaving some cracks and pops, but still, users get a lot of improvement in the audio quality.

You can record and extract audio from video files. The customizable toolbars, interfaces, and a wide variety of presets give you a complete audio editing experience with Sound Forge.

The only drawback is that the software cannot handle multiple audio files and plugin effects together in the free version, making it useless for batch processing. However, you can get these features in the paid version.

Part 2. What is Sound Forge?

Sound Forge is an audio editor for newbies and professionals and has two versions, i.e., Sound Forge pro 12 and Sound Forge Audio Studio 13, released in April 2018 and January 2019, respectively. Although the software was developed in the US, MAGIX is doing further developments, so you get American originality and German modifications in one program.

The innovative features such as fast and powerful processing, editing, and workflow are why many producers, including Grammy winners, have chosen this tool globally for the past 20 years.

MAGIX has developed the latest version of this software, Sound Forge Pro 16 suite , setting new audio quality standards with advanced plug-ins.

Part 3. MAGIX Sound Forge 16 Review

Now that you know about Sound Forge and its origin, let’s review the software regarding price, features, and user ratings.

How much does Sound Forge cost?

Sound Forge is a paid software but excellent value for money and offers a wide range of features and plug-ins that make audio editing fun and easy.

The different versions are available at different pricing, and monthly or yearly subscriptions are also available.

Sound Forge Audio Studio 365 is available at 3-5$ per month per year with a starting price of 60$. Sound Forge Pro is available for 279$, Sound Forge Pro Suite for 399$, Sound Forge Pro 365 for 14.99$ per month, and Sound Forge Pro Suite 365 for 19.99$ per month.

Innovative features of Sound Forge

Here are some unique Sound Forge features that make it ideal for audio editing needs.

• Professional and Comprehensive audio editing: The improved workflow of the software allows you to edit, splice, and adjust audio files with just a few clicks and deliver a professional audio finish as precisely as you want.
• Audio restoration: Sound Forge restores vinyl and tapes into digital audio such as CDs, transforming outdated sound into exceptional studio quality. However, you need to have a vinyl converter turntable for this purpose.The Audio Studio version lacks the audio restoration plugins that the Pro Studio version offer.
• Recording any sound up to 32-bit/384 kHz: With Sound Forge, you can record podcasts, singing, webinars, and do a voice-over up to 32-bit/384 kHz and view the process with a live waveform display and real-time monitoring.
• Effects and effects presets: Sound Forge provide 11 DirectX audio effects and 90 effects preset to get the right sound for you. Furthermore, the software can let you preview the effects before applying them to your audio recordings.
• Import and export audio file: You can import or export any audio file into standard (MP3, FLAC, WAV, RAW, ASF, CDA, AIFF, VOX, OGG, MUS, and W64) formats with Sound Forge Audio Studio 16.

Score on G2

The overall G2 (a famous software review website) rating of Sound Forge is 4.3 out of 5. Users rated the software on the G2 platform as:

• 4 for “Ease of use
• 4 for “Quality Support
• 9 for “Ease of Setup

To help you have a better overview of MAGIX Sound Forge 16, we have prepared a review video below.

Video - New Features and Workflows of MAGIX Sound Forge 16

Click here

Part 4. Pros and Cons of MAGIX Sound Forge

Below are some Sound Forge pros and cons to help you make a quick decision about the software.

Pros of Sound Forge

• User-friendly: The top-notch software comes with a user-friendly interface, making it easy to learn and simple to control for beginners in the audio editing field.
• Compatibility: The high-quality audio software solution is available for both Windows and Mac operating systems.
• Customizable software: Sound Forge is the most customizable software, offering customization of toolbars to get the exact tools you need and letting you change audio editing windows arrangement.
• Support VST plugin: Sound Forge supports the VST plugin that is used to integrate software audio effects and effect plugins to help you create a more compelling final product.

Cons of Sound Forge

• No Batch Processing: one main drawback of Sound Forge is that it cannot do batch processing, making it useless to process multiple audio files and plug-ins together.
• Noise reduction/ Noise cancellation: The software does not do much for noise reduction; its “Noise Gate Technology” distort the recording instead of filtering the noise.

Part 5. MAGIX Sound Forge vs. Audacity

Both Sound Forge and Audacity are audio editing and mixing software. By comparing their features, you can get an idea to which one to use for your audio editing projects.

What is Audacity?

Audacity is free and open-source software developed by Dominic Mazzoni and Roger Dannenberg and released on May 28, 2000. In April 2021, Muse group acquired the Audacity trademark but kept the application free and open source.

Audacity offers a great variety of features, such as a playback/record tool, editing options, and a wide range of effects that help professionals to adjust soundtracks, import and export audio files in any standard format, and analyze sound frequencies.

Comparing Sound Forge and Audacity

Features	Sound Forge	Audacity
Price/ Value for money	4.7/5	4.5/5
Compatibility	Windows and Mac	Windows and Mac
Ease of Use	8.4/10	8.4/10
Advanced Features	DynamicEQLoudness visualizationOptimized multichannel workflow	Multiple tracksAuto audio duckingBackground noise removalAudio filters
Scores on G2	4.3/5	4.5/5

Our Recommendations

Due to the advanced features and high scores on G2, we recommend using Audacity. However, other factors always come into play as the audio editing demands and needs change with time. So, Sound Forge can be a good option for you as a nomad in the music editing industry.

Most companies (with 50-200 employees and 1M-10M revenue) and the higher education industry in the United States are using Sound Forge.

On the other hand, businesses often use Audacity for marketing purposes, such as making Podcasts. The software can record audio for PowerPoint presentations to help visually impaired employees.

Conclusion

In this article, we’ve introduced Sound Forge, its price, the software’s features, and what the users think about it. Later in the guide, we compared Sound Forge with one of the leading music editors, Audacity, and learned how they stack up against each other.

Hopefully, you can now decide better about choosing a music editing software for your audio recording and editing needs.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Part 4. Pros and Cons of MAGIX Sound Forge

Below are some Sound Forge pros and cons to help you make a quick decision about the software.

Pros of Sound Forge

• User-friendly: The top-notch software comes with a user-friendly interface, making it easy to learn and simple to control for beginners in the audio editing field.
• Compatibility: The high-quality audio software solution is available for both Windows and Mac operating systems.
• Customizable software: Sound Forge is the most customizable software, offering customization of toolbars to get the exact tools you need and letting you change audio editing windows arrangement.
• Support VST plugin: Sound Forge supports the VST plugin that is used to integrate software audio effects and effect plugins to help you create a more compelling final product.

Cons of Sound Forge

• No Batch Processing: one main drawback of Sound Forge is that it cannot do batch processing, making it useless to process multiple audio files and plug-ins together.
• Noise reduction/ Noise cancellation: The software does not do much for noise reduction; its “Noise Gate Technology” distort the recording instead of filtering the noise.

Part 5. MAGIX Sound Forge vs. Audacity

Both Sound Forge and Audacity are audio editing and mixing software. By comparing their features, you can get an idea to which one to use for your audio editing projects.

What is Audacity?

Audacity is free and open-source software developed by Dominic Mazzoni and Roger Dannenberg and released on May 28, 2000. In April 2021, Muse group acquired the Audacity trademark but kept the application free and open source.

Audacity offers a great variety of features, such as a playback/record tool, editing options, and a wide range of effects that help professionals to adjust soundtracks, import and export audio files in any standard format, and analyze sound frequencies.

Comparing Sound Forge and Audacity

Features	Sound Forge	Audacity
Price/ Value for money	4.7/5	4.5/5
Compatibility	Windows and Mac	Windows and Mac
Ease of Use	8.4/10	8.4/10
Advanced Features	DynamicEQLoudness visualizationOptimized multichannel workflow	Multiple tracksAuto audio duckingBackground noise removalAudio filters
Scores on G2	4.3/5	4.5/5

Our Recommendations

Due to the advanced features and high scores on G2, we recommend using Audacity. However, other factors always come into play as the audio editing demands and needs change with time. So, Sound Forge can be a good option for you as a nomad in the music editing industry.

Most companies (with 50-200 employees and 1M-10M revenue) and the higher education industry in the United States are using Sound Forge.

On the other hand, businesses often use Audacity for marketing purposes, such as making Podcasts. The software can record audio for PowerPoint presentations to help visually impaired employees.

Conclusion

In this article, we’ve introduced Sound Forge, its price, the software’s features, and what the users think about it. Later in the guide, we compared Sound Forge with one of the leading music editors, Audacity, and learned how they stack up against each other.

Hopefully, you can now decide better about choosing a music editing software for your audio recording and editing needs.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

Also read: