Enhancing Your Soundscapes: Dynamic Volume Changes Made Simple with Adobe After Effects

How to Fade In and Fade Out Audio in Adobe After Effects

Benjamin Arango

Mar 27, 2024• Proven solutions

Many of us get the first association when Adobe After Effects is mentioned: stunning motion graphics and breathtaking visual effects. Very few people think of audio editing when they talk about AE, even though this application offers a simple way to add Fade in and fade out effects to audio files used in soundtracks.

However, you will need to have at least basic video and sound editing skills to fade in and fade out audio files in AE since the app doesn’t offer a preset that you can drag and drop to the timeline. So, in this article, we will show how to create the Fade in and fade out effects in Adobe After Effects in just a few simple steps.

Read More to Get: Best Audio Mixer Software to Trim Your Sound Easily >>

Adding the Fade In and Fade Out Effects to Audio Files in AE

Step 1: Check audio waveform in After Effects

Once you’ve created a new project in AE and you’ve imported the audio files you’d like to include in the soundtrack of the video you’re making, you should place that audio file on the timeline. Click on the arrow located next to the audio file, then click on the Audio arrow that will be displayed under the file, and finally click on the Waveform arrow. This will enable you to see the waveform of the audio file you’d like to edit on the timeline and allow you to add Fade in and fade out effects with more precision. The file you added to your composition will be displayed as a layer in the Composition tab located in the lower-left region of the software’s interface.

Step 2: Add a keyframe to the audio file

The next thing you will have to do is place the playhead at the exact location where you want the Fade In effect to start. In most cases, Fade effects are added at the starting point of the audio file, so you should position the playhead at the beginning of the timeline or zero seconds. You will be able to see a stopwatch next to the Audio Levels option located in the Composition tab. Click on it to add the first keyframe and assign a negative value to the Audio Level setting. -100db or -50db values will make the audio file silent, and you can pick either based on how long you want the Fade in effect to last. If you don’t know how to use keyframes in After Effects, this article will give you some info .

You may also like: 15 Free After Effects Templates to Power up Your Video

Step 3: Complete Fade out/in audio in After Effects

Move the playhead to the location where you want the effect to end and add another keyframe by clicking on the ‘Add or remove keyframe at current time’ icon. Set the Audio Level value to 0db, and that is it. You’ve created the Fade in effect. Keep in mind that you can use more than two keyframes to fade in audio, enabling you to increase the audio level gradually. The process of creating the Fade effect requires you to add a keyframe that has a 0db value a few seconds before the clip ends and then add another keyframe at the very end of the audio file that has -50 or -100db audio level value.

Tips For Making Better Fade In and Fade Out Effects

The process of creating a fade in or a fade out effect in AE is quite simple, but it is up to you to discover creative ways of using these effects. Here are a few tips that can help you use these audio effects more creatively.

1. Avoid Hard Cuts

A high pitch sound at the very begging of a new sequence can ruin your soundtrack and ultimately the entire video, so in case you’ve cut an audio file at the location where the sound peaks, you can apply a fade in effect to make the transition between two audio files softer.

You may also like: How to Cut Video in After Effects

2. Be Mindful of Audio Compression

Audio compression is a process that reduces loud sounds and amplifies quiet sounds, resulting from the audio file’s dynamic range being compressed. In most cases, you won’t notice the effects of audio compression, but if you compress an audio file too much, you might get some unwanted side effects if you add a fade out effect to that file. That’s why it is best to rely on the default audio compression features a video or audio editing app offers.

3. Use the Fade In and Fade Out Effects Creatively

Besides opening and closing scenes, you can also use the Fade in and fade out effects to mix two different tracks while the shot is still in progress. Fade out one track, make it look like a scene is ending, and then introduce a new theme that changes the mood of that scene. The important thing is to avoid reducing the audio level all the way to -100db because you might end up creating silence in a scene that disrupts the flow of an entire video.

Conclusion

Fading in or fading out audio files in Adobe After Effects doesn’t require much effort, as you have to add a few keyframes to the file and adjust the Audio Level value. However, finding the best way to improve the quality of your soundtrack by applying these effects may take some practice. Do you often add Fade in and fade out audio effects in AE? Leave a comment below and share your experiences with us.

If you want to fade in/out audio easily, we recommend using Filmora . It is designed for people who wish to edit professional videos with simple-to-use features. Besides Fade in/out audio in Filmora, you can automatically sync audio to video. Download it now to have a try (free)!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Many of us get the first association when Adobe After Effects is mentioned: stunning motion graphics and breathtaking visual effects. Very few people think of audio editing when they talk about AE, even though this application offers a simple way to add Fade in and fade out effects to audio files used in soundtracks.

However, you will need to have at least basic video and sound editing skills to fade in and fade out audio files in AE since the app doesn’t offer a preset that you can drag and drop to the timeline. So, in this article, we will show how to create the Fade in and fade out effects in Adobe After Effects in just a few simple steps.

Read More to Get: Best Audio Mixer Software to Trim Your Sound Easily >>

Adding the Fade In and Fade Out Effects to Audio Files in AE

Step 1: Check audio waveform in After Effects

Once you’ve created a new project in AE and you’ve imported the audio files you’d like to include in the soundtrack of the video you’re making, you should place that audio file on the timeline. Click on the arrow located next to the audio file, then click on the Audio arrow that will be displayed under the file, and finally click on the Waveform arrow. This will enable you to see the waveform of the audio file you’d like to edit on the timeline and allow you to add Fade in and fade out effects with more precision. The file you added to your composition will be displayed as a layer in the Composition tab located in the lower-left region of the software’s interface.

Step 2: Add a keyframe to the audio file

The next thing you will have to do is place the playhead at the exact location where you want the Fade In effect to start. In most cases, Fade effects are added at the starting point of the audio file, so you should position the playhead at the beginning of the timeline or zero seconds. You will be able to see a stopwatch next to the Audio Levels option located in the Composition tab. Click on it to add the first keyframe and assign a negative value to the Audio Level setting. -100db or -50db values will make the audio file silent, and you can pick either based on how long you want the Fade in effect to last. If you don’t know how to use keyframes in After Effects, this article will give you some info .

You may also like: 15 Free After Effects Templates to Power up Your Video

Step 3: Complete Fade out/in audio in After Effects

Move the playhead to the location where you want the effect to end and add another keyframe by clicking on the ‘Add or remove keyframe at current time’ icon. Set the Audio Level value to 0db, and that is it. You’ve created the Fade in effect. Keep in mind that you can use more than two keyframes to fade in audio, enabling you to increase the audio level gradually. The process of creating the Fade effect requires you to add a keyframe that has a 0db value a few seconds before the clip ends and then add another keyframe at the very end of the audio file that has -50 or -100db audio level value.

Tips For Making Better Fade In and Fade Out Effects

The process of creating a fade in or a fade out effect in AE is quite simple, but it is up to you to discover creative ways of using these effects. Here are a few tips that can help you use these audio effects more creatively.

1. Avoid Hard Cuts

A high pitch sound at the very begging of a new sequence can ruin your soundtrack and ultimately the entire video, so in case you’ve cut an audio file at the location where the sound peaks, you can apply a fade in effect to make the transition between two audio files softer.

You may also like: How to Cut Video in After Effects

2. Be Mindful of Audio Compression

Audio compression is a process that reduces loud sounds and amplifies quiet sounds, resulting from the audio file’s dynamic range being compressed. In most cases, you won’t notice the effects of audio compression, but if you compress an audio file too much, you might get some unwanted side effects if you add a fade out effect to that file. That’s why it is best to rely on the default audio compression features a video or audio editing app offers.

3. Use the Fade In and Fade Out Effects Creatively

Besides opening and closing scenes, you can also use the Fade in and fade out effects to mix two different tracks while the shot is still in progress. Fade out one track, make it look like a scene is ending, and then introduce a new theme that changes the mood of that scene. The important thing is to avoid reducing the audio level all the way to -100db because you might end up creating silence in a scene that disrupts the flow of an entire video.

Conclusion

Fading in or fading out audio files in Adobe After Effects doesn’t require much effort, as you have to add a few keyframes to the file and adjust the Audio Level value. However, finding the best way to improve the quality of your soundtrack by applying these effects may take some practice. Do you often add Fade in and fade out audio effects in AE? Leave a comment below and share your experiences with us.

If you want to fade in/out audio easily, we recommend using Filmora . It is designed for people who wish to edit professional videos with simple-to-use features. Besides Fade in/out audio in Filmora, you can automatically sync audio to video. Download it now to have a try (free)!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Many of us get the first association when Adobe After Effects is mentioned: stunning motion graphics and breathtaking visual effects. Very few people think of audio editing when they talk about AE, even though this application offers a simple way to add Fade in and fade out effects to audio files used in soundtracks.

However, you will need to have at least basic video and sound editing skills to fade in and fade out audio files in AE since the app doesn’t offer a preset that you can drag and drop to the timeline. So, in this article, we will show how to create the Fade in and fade out effects in Adobe After Effects in just a few simple steps.

Read More to Get: Best Audio Mixer Software to Trim Your Sound Easily >>

Adding the Fade In and Fade Out Effects to Audio Files in AE

Step 1: Check audio waveform in After Effects

Once you’ve created a new project in AE and you’ve imported the audio files you’d like to include in the soundtrack of the video you’re making, you should place that audio file on the timeline. Click on the arrow located next to the audio file, then click on the Audio arrow that will be displayed under the file, and finally click on the Waveform arrow. This will enable you to see the waveform of the audio file you’d like to edit on the timeline and allow you to add Fade in and fade out effects with more precision. The file you added to your composition will be displayed as a layer in the Composition tab located in the lower-left region of the software’s interface.

Step 2: Add a keyframe to the audio file

The next thing you will have to do is place the playhead at the exact location where you want the Fade In effect to start. In most cases, Fade effects are added at the starting point of the audio file, so you should position the playhead at the beginning of the timeline or zero seconds. You will be able to see a stopwatch next to the Audio Levels option located in the Composition tab. Click on it to add the first keyframe and assign a negative value to the Audio Level setting. -100db or -50db values will make the audio file silent, and you can pick either based on how long you want the Fade in effect to last. If you don’t know how to use keyframes in After Effects, this article will give you some info .

You may also like: 15 Free After Effects Templates to Power up Your Video

Step 3: Complete Fade out/in audio in After Effects

Move the playhead to the location where you want the effect to end and add another keyframe by clicking on the ‘Add or remove keyframe at current time’ icon. Set the Audio Level value to 0db, and that is it. You’ve created the Fade in effect. Keep in mind that you can use more than two keyframes to fade in audio, enabling you to increase the audio level gradually. The process of creating the Fade effect requires you to add a keyframe that has a 0db value a few seconds before the clip ends and then add another keyframe at the very end of the audio file that has -50 or -100db audio level value.

Tips For Making Better Fade In and Fade Out Effects

The process of creating a fade in or a fade out effect in AE is quite simple, but it is up to you to discover creative ways of using these effects. Here are a few tips that can help you use these audio effects more creatively.

1. Avoid Hard Cuts

A high pitch sound at the very begging of a new sequence can ruin your soundtrack and ultimately the entire video, so in case you’ve cut an audio file at the location where the sound peaks, you can apply a fade in effect to make the transition between two audio files softer.

You may also like: How to Cut Video in After Effects

2. Be Mindful of Audio Compression

Audio compression is a process that reduces loud sounds and amplifies quiet sounds, resulting from the audio file’s dynamic range being compressed. In most cases, you won’t notice the effects of audio compression, but if you compress an audio file too much, you might get some unwanted side effects if you add a fade out effect to that file. That’s why it is best to rely on the default audio compression features a video or audio editing app offers.

3. Use the Fade In and Fade Out Effects Creatively

Besides opening and closing scenes, you can also use the Fade in and fade out effects to mix two different tracks while the shot is still in progress. Fade out one track, make it look like a scene is ending, and then introduce a new theme that changes the mood of that scene. The important thing is to avoid reducing the audio level all the way to -100db because you might end up creating silence in a scene that disrupts the flow of an entire video.

Conclusion

Fading in or fading out audio files in Adobe After Effects doesn’t require much effort, as you have to add a few keyframes to the file and adjust the Audio Level value. However, finding the best way to improve the quality of your soundtrack by applying these effects may take some practice. Do you often add Fade in and fade out audio effects in AE? Leave a comment below and share your experiences with us.

If you want to fade in/out audio easily, we recommend using Filmora . It is designed for people who wish to edit professional videos with simple-to-use features. Besides Fade in/out audio in Filmora, you can automatically sync audio to video. Download it now to have a try (free)!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

Many of us get the first association when Adobe After Effects is mentioned: stunning motion graphics and breathtaking visual effects. Very few people think of audio editing when they talk about AE, even though this application offers a simple way to add Fade in and fade out effects to audio files used in soundtracks.

However, you will need to have at least basic video and sound editing skills to fade in and fade out audio files in AE since the app doesn’t offer a preset that you can drag and drop to the timeline. So, in this article, we will show how to create the Fade in and fade out effects in Adobe After Effects in just a few simple steps.

Read More to Get: Best Audio Mixer Software to Trim Your Sound Easily >>

Adding the Fade In and Fade Out Effects to Audio Files in AE

Step 1: Check audio waveform in After Effects

Once you’ve created a new project in AE and you’ve imported the audio files you’d like to include in the soundtrack of the video you’re making, you should place that audio file on the timeline. Click on the arrow located next to the audio file, then click on the Audio arrow that will be displayed under the file, and finally click on the Waveform arrow. This will enable you to see the waveform of the audio file you’d like to edit on the timeline and allow you to add Fade in and fade out effects with more precision. The file you added to your composition will be displayed as a layer in the Composition tab located in the lower-left region of the software’s interface.

Step 2: Add a keyframe to the audio file

The next thing you will have to do is place the playhead at the exact location where you want the Fade In effect to start. In most cases, Fade effects are added at the starting point of the audio file, so you should position the playhead at the beginning of the timeline or zero seconds. You will be able to see a stopwatch next to the Audio Levels option located in the Composition tab. Click on it to add the first keyframe and assign a negative value to the Audio Level setting. -100db or -50db values will make the audio file silent, and you can pick either based on how long you want the Fade in effect to last. If you don’t know how to use keyframes in After Effects, this article will give you some info .

You may also like: 15 Free After Effects Templates to Power up Your Video

Step 3: Complete Fade out/in audio in After Effects

Move the playhead to the location where you want the effect to end and add another keyframe by clicking on the ‘Add or remove keyframe at current time’ icon. Set the Audio Level value to 0db, and that is it. You’ve created the Fade in effect. Keep in mind that you can use more than two keyframes to fade in audio, enabling you to increase the audio level gradually. The process of creating the Fade effect requires you to add a keyframe that has a 0db value a few seconds before the clip ends and then add another keyframe at the very end of the audio file that has -50 or -100db audio level value.

Tips For Making Better Fade In and Fade Out Effects

The process of creating a fade in or a fade out effect in AE is quite simple, but it is up to you to discover creative ways of using these effects. Here are a few tips that can help you use these audio effects more creatively.

1. Avoid Hard Cuts

A high pitch sound at the very begging of a new sequence can ruin your soundtrack and ultimately the entire video, so in case you’ve cut an audio file at the location where the sound peaks, you can apply a fade in effect to make the transition between two audio files softer.

You may also like: How to Cut Video in After Effects

2. Be Mindful of Audio Compression

Audio compression is a process that reduces loud sounds and amplifies quiet sounds, resulting from the audio file’s dynamic range being compressed. In most cases, you won’t notice the effects of audio compression, but if you compress an audio file too much, you might get some unwanted side effects if you add a fade out effect to that file. That’s why it is best to rely on the default audio compression features a video or audio editing app offers.

3. Use the Fade In and Fade Out Effects Creatively

Besides opening and closing scenes, you can also use the Fade in and fade out effects to mix two different tracks while the shot is still in progress. Fade out one track, make it look like a scene is ending, and then introduce a new theme that changes the mood of that scene. The important thing is to avoid reducing the audio level all the way to -100db because you might end up creating silence in a scene that disrupts the flow of an entire video.

Conclusion

Fading in or fading out audio files in Adobe After Effects doesn’t require much effort, as you have to add a few keyframes to the file and adjust the Audio Level value. However, finding the best way to improve the quality of your soundtrack by applying these effects may take some practice. Do you often add Fade in and fade out audio effects in AE? Leave a comment below and share your experiences with us.

If you want to fade in/out audio easily, we recommend using Filmora . It is designed for people who wish to edit professional videos with simple-to-use features. Besides Fade in/out audio in Filmora, you can automatically sync audio to video. Download it now to have a try (free)!

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Revolutionizing Your Music Tracks with 7 Key Audio Effects of the Year

7 Types of Audio Effects You Should Know

Benjamin Arango

Mar 27, 2024• Proven solutions

When it comes to producing music, audio effects are a next-level creative tool that you can make use of to create highly enthralling and creative music/videos.

You can either create audio effects of your own or make use of a predefined royalty-free audio effects template (if you don’t wish to invest, as a beginner).

Audio effects have the power to transform any so-so music into a superior finished track.

For this reason, we’ve specifically tailored this post to help you understand the insights of audio effects. Moreover, we’re also going to get familiar with 7 audio effects that must be known! So, let’s not delay any further and start exploring.

• Part 1: The Definition of Audio Effects
• Part 2: Audio effects - Reverb
• Part 3: Audio effects - Panning
• Part 4: Audio effects - Equalization
• Part 5: Audio effects - Delay and Echo
• Part 6: Audio effects - Distortion
• Part 7: Audio effects - Chorus
• Part 8: Audio effects - Filters

Part 1: The Definition of Audio Effects

Before we get our hands on the different core types of audio effects, we should first understand what audio effects are!

Basically, the audio effects are generated by software or hardware devices by manipulating how an audio signal sounds. One can control the Effects with the help of several parameters.

For instance, rate, drive, or feedback. They come in handy as studio tools during the mixing or recording of music or while playing live.

Here are some core types of audio effects we will discover further in the article.

• Time-based effects include “Reverb” and “Delay and Echo.”
• Spectral effects include the “Equalization (EQ)” and “Panning.”
• Dynamic effects include “Distortion.”
• Modulation effects include “Chorus.”
• And “Filters.”

Part 2: Audio effects - Reverb

Reverb is nothing but an audio effect of many echoes occurring simultaneously.

In other words, sound reaches your ears in two ways. One that directly reaches your eardrums without any obstacles or surfaces.

And the other, a bunch of sound waves that reach your ears after getting bounced off different surfaces. This set of echoes reach your eardrums later and is quieter (due to lesser energy).

You may experience different types of reverb audio effects for different kinds of spaces. Basically, Reverb stands for Reverberation. It happens quite always in our daily life, but we hardly notice it.

For instance, Reverb at tunnels or caves is different from the reverb audio effect of cathedrals or halls.

Reverb audio effects can be generated digitally with the help of reverb plugins to create multiple echoes algorithmically and by manipulating the Delay, level, or frequency response.

Part 3: Audio effects - Panning

The panning audio effect is generally created to cast an illusion that the source of the sound is moving from one position of the stage to another. This is achieved by distributing the sound signal in a multichannel or a stereo field.

Panning audio effect is highly helpful when you need to avoid muddiness or masking (when two tracks/sounds overlap) in your mix. You can position the sound artificially to a specific area of your stereo field.

With the help of an auto-pan, you can define the time span during which the sound must sweep across the stereo field.

Usually, the lead elements like vocals or the low-frequency elements like bassline drums panned to the center. This is because the center is the busiest, and also these sound elements ground your mix.

Part 4: Audio effects - Equalization

The sound frequency that falls into the range from 20 to 20,000 Hz is the audible sound spectrum of human ears. With the EQ technique, this spectrum is split into different sections referred to as bands.

These bands are then used to subdue or enhance a mixed track’s fragments.

Remember, EQ-ing works on the existing spectrum only by altering the fragments to create novel-sounding effects. EQ audio effects are majorly used to define a character or tone of the soundtrack.

Moreover, you can define different types of sound characters with the help of different EQ audio effects. For instance, a digital plugin EQ is far more transparent sounding when compared to a vintage EQ.

Part 5: Audio effects - Delay and Echo

Delay is yet another type of audio effect that falls under the Time-based category. Adding layers can significantly provide more complexity and depth to a soundtrack.

The foundation to add Reverb or chorus-like other audio effects is furnished by Delay. Hence, it is prominently utilized by several mixing engineers.

The echo also falls under the time-based audio effect, which is developed due to the Delay audio effect. An echoing effect is simulated at various intervals when Delay audio effect features playback heads or “taps” that are heard apart.

If you want to edit audios like a pro, you should use Filmora . It is the best video editor for different users. You can add echo to audio by directly dragging the effect onto the timeline. Download it now to have a try (Free)!

Part 6: Audio effects - Distortion

When an audio circuit is overloaded, it ultimately leads to a clip the signal is termed as Distortion.

This audio effect can be a highly creative tool if used correctly. Distortion pushes the sound to compress and clip by manipulating the original audio signal.

By manipulating the bit rate or the sampling rate, Bit-crushing is achieved. This, eventually, adds harmony to the sound.

Usually, the electric guitars make use of Distortion audio effect but more progressively it is being used over Synths.

Distortion can be acquired using effects units, rackmounts, pedals, VSTs, or at times, built-in amplifiers and pre-amps. Distortion adds complexity and body to your track by making it fatter and fuller.

Part 7: Audio effects - Chorus

Chorus audio effect is referred to the varying sounds that are similar and are heard as one.

For instance, recording the same note piled over each other and is timed and tuned slightly off each other.

This as a whole, creates a chorus effect. In simple words, a group of singers is voicing a song while creating a special sound effect.

The chorus, too, adds complexity and depth to your soundtracks. It is generally used to enhance the harmony or load up the particular track, making the track fuller and layered.

Part 8: Audio effects - Filters

An audio signal’s frequency range can be altered using the Audio filters. With the help of an audio filter, you can easily amplify or boost the frequency range.

Or, can even cut or attenuate a frequency range too. When it comes to categorizing the Audio Filters, they fall under 3 units; HPF (High-pass filters), LPF (Low-pass filters), BPF (Band-pass filters).

Every other filter has a well-defined threshold for boosting or cutting a frequency. They are then categorized depending on the alterations that have been made above or below this threshold.

An Audio filter is a prominent tool used to correct problems and significantly enhance tracks. You can effectively make dramatic effects or add character to the soundtrack with filters.

Conclusion

With this comprehensive discussion on audio effects and various core types of audio effects, it’s now time to conclude this topic. We now believe you have a full understanding of these core audio effects and can effectively use them as per your needs.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

When it comes to producing music, audio effects are a next-level creative tool that you can make use of to create highly enthralling and creative music/videos.

You can either create audio effects of your own or make use of a predefined royalty-free audio effects template (if you don’t wish to invest, as a beginner).

Audio effects have the power to transform any so-so music into a superior finished track.

For this reason, we’ve specifically tailored this post to help you understand the insights of audio effects. Moreover, we’re also going to get familiar with 7 audio effects that must be known! So, let’s not delay any further and start exploring.

• Part 1: The Definition of Audio Effects
• Part 2: Audio effects - Reverb
• Part 3: Audio effects - Panning
• Part 4: Audio effects - Equalization
• Part 5: Audio effects - Delay and Echo
• Part 6: Audio effects - Distortion
• Part 7: Audio effects - Chorus
• Part 8: Audio effects - Filters

Part 1: The Definition of Audio Effects

Before we get our hands on the different core types of audio effects, we should first understand what audio effects are!

Basically, the audio effects are generated by software or hardware devices by manipulating how an audio signal sounds. One can control the Effects with the help of several parameters.

For instance, rate, drive, or feedback. They come in handy as studio tools during the mixing or recording of music or while playing live.

Here are some core types of audio effects we will discover further in the article.

• Time-based effects include “Reverb” and “Delay and Echo.”
• Spectral effects include the “Equalization (EQ)” and “Panning.”
• Dynamic effects include “Distortion.”
• Modulation effects include “Chorus.”
• And “Filters.”

Part 2: Audio effects - Reverb

Reverb is nothing but an audio effect of many echoes occurring simultaneously.

In other words, sound reaches your ears in two ways. One that directly reaches your eardrums without any obstacles or surfaces.

And the other, a bunch of sound waves that reach your ears after getting bounced off different surfaces. This set of echoes reach your eardrums later and is quieter (due to lesser energy).

You may experience different types of reverb audio effects for different kinds of spaces. Basically, Reverb stands for Reverberation. It happens quite always in our daily life, but we hardly notice it.

For instance, Reverb at tunnels or caves is different from the reverb audio effect of cathedrals or halls.

Reverb audio effects can be generated digitally with the help of reverb plugins to create multiple echoes algorithmically and by manipulating the Delay, level, or frequency response.

Part 3: Audio effects - Panning

The panning audio effect is generally created to cast an illusion that the source of the sound is moving from one position of the stage to another. This is achieved by distributing the sound signal in a multichannel or a stereo field.

Panning audio effect is highly helpful when you need to avoid muddiness or masking (when two tracks/sounds overlap) in your mix. You can position the sound artificially to a specific area of your stereo field.

With the help of an auto-pan, you can define the time span during which the sound must sweep across the stereo field.

Usually, the lead elements like vocals or the low-frequency elements like bassline drums panned to the center. This is because the center is the busiest, and also these sound elements ground your mix.

Part 4: Audio effects - Equalization

The sound frequency that falls into the range from 20 to 20,000 Hz is the audible sound spectrum of human ears. With the EQ technique, this spectrum is split into different sections referred to as bands.

These bands are then used to subdue or enhance a mixed track’s fragments.

Remember, EQ-ing works on the existing spectrum only by altering the fragments to create novel-sounding effects. EQ audio effects are majorly used to define a character or tone of the soundtrack.

Moreover, you can define different types of sound characters with the help of different EQ audio effects. For instance, a digital plugin EQ is far more transparent sounding when compared to a vintage EQ.

Part 5: Audio effects - Delay and Echo

Delay is yet another type of audio effect that falls under the Time-based category. Adding layers can significantly provide more complexity and depth to a soundtrack.

The foundation to add Reverb or chorus-like other audio effects is furnished by Delay. Hence, it is prominently utilized by several mixing engineers.

The echo also falls under the time-based audio effect, which is developed due to the Delay audio effect. An echoing effect is simulated at various intervals when Delay audio effect features playback heads or “taps” that are heard apart.

If you want to edit audios like a pro, you should use Filmora . It is the best video editor for different users. You can add echo to audio by directly dragging the effect onto the timeline. Download it now to have a try (Free)!

Part 6: Audio effects - Distortion

When an audio circuit is overloaded, it ultimately leads to a clip the signal is termed as Distortion.

This audio effect can be a highly creative tool if used correctly. Distortion pushes the sound to compress and clip by manipulating the original audio signal.

By manipulating the bit rate or the sampling rate, Bit-crushing is achieved. This, eventually, adds harmony to the sound.

Usually, the electric guitars make use of Distortion audio effect but more progressively it is being used over Synths.

Distortion can be acquired using effects units, rackmounts, pedals, VSTs, or at times, built-in amplifiers and pre-amps. Distortion adds complexity and body to your track by making it fatter and fuller.

Part 7: Audio effects - Chorus

Chorus audio effect is referred to the varying sounds that are similar and are heard as one.

For instance, recording the same note piled over each other and is timed and tuned slightly off each other.

This as a whole, creates a chorus effect. In simple words, a group of singers is voicing a song while creating a special sound effect.

The chorus, too, adds complexity and depth to your soundtracks. It is generally used to enhance the harmony or load up the particular track, making the track fuller and layered.

Part 8: Audio effects - Filters

An audio signal’s frequency range can be altered using the Audio filters. With the help of an audio filter, you can easily amplify or boost the frequency range.

Or, can even cut or attenuate a frequency range too. When it comes to categorizing the Audio Filters, they fall under 3 units; HPF (High-pass filters), LPF (Low-pass filters), BPF (Band-pass filters).

Every other filter has a well-defined threshold for boosting or cutting a frequency. They are then categorized depending on the alterations that have been made above or below this threshold.

An Audio filter is a prominent tool used to correct problems and significantly enhance tracks. You can effectively make dramatic effects or add character to the soundtrack with filters.

Conclusion

With this comprehensive discussion on audio effects and various core types of audio effects, it’s now time to conclude this topic. We now believe you have a full understanding of these core audio effects and can effectively use them as per your needs.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

When it comes to producing music, audio effects are a next-level creative tool that you can make use of to create highly enthralling and creative music/videos.

You can either create audio effects of your own or make use of a predefined royalty-free audio effects template (if you don’t wish to invest, as a beginner).

Audio effects have the power to transform any so-so music into a superior finished track.

For this reason, we’ve specifically tailored this post to help you understand the insights of audio effects. Moreover, we’re also going to get familiar with 7 audio effects that must be known! So, let’s not delay any further and start exploring.

• Part 1: The Definition of Audio Effects
• Part 2: Audio effects - Reverb
• Part 3: Audio effects - Panning
• Part 4: Audio effects - Equalization
• Part 5: Audio effects - Delay and Echo
• Part 6: Audio effects - Distortion
• Part 7: Audio effects - Chorus
• Part 8: Audio effects - Filters

Part 1: The Definition of Audio Effects

Before we get our hands on the different core types of audio effects, we should first understand what audio effects are!

Basically, the audio effects are generated by software or hardware devices by manipulating how an audio signal sounds. One can control the Effects with the help of several parameters.

For instance, rate, drive, or feedback. They come in handy as studio tools during the mixing or recording of music or while playing live.

Here are some core types of audio effects we will discover further in the article.

• Time-based effects include “Reverb” and “Delay and Echo.”
• Spectral effects include the “Equalization (EQ)” and “Panning.”
• Dynamic effects include “Distortion.”
• Modulation effects include “Chorus.”
• And “Filters.”

Part 2: Audio effects - Reverb

Reverb is nothing but an audio effect of many echoes occurring simultaneously.

In other words, sound reaches your ears in two ways. One that directly reaches your eardrums without any obstacles or surfaces.

And the other, a bunch of sound waves that reach your ears after getting bounced off different surfaces. This set of echoes reach your eardrums later and is quieter (due to lesser energy).

You may experience different types of reverb audio effects for different kinds of spaces. Basically, Reverb stands for Reverberation. It happens quite always in our daily life, but we hardly notice it.

For instance, Reverb at tunnels or caves is different from the reverb audio effect of cathedrals or halls.

Reverb audio effects can be generated digitally with the help of reverb plugins to create multiple echoes algorithmically and by manipulating the Delay, level, or frequency response.

Part 3: Audio effects - Panning

The panning audio effect is generally created to cast an illusion that the source of the sound is moving from one position of the stage to another. This is achieved by distributing the sound signal in a multichannel or a stereo field.

Panning audio effect is highly helpful when you need to avoid muddiness or masking (when two tracks/sounds overlap) in your mix. You can position the sound artificially to a specific area of your stereo field.

With the help of an auto-pan, you can define the time span during which the sound must sweep across the stereo field.

Usually, the lead elements like vocals or the low-frequency elements like bassline drums panned to the center. This is because the center is the busiest, and also these sound elements ground your mix.

Part 4: Audio effects - Equalization

The sound frequency that falls into the range from 20 to 20,000 Hz is the audible sound spectrum of human ears. With the EQ technique, this spectrum is split into different sections referred to as bands.

These bands are then used to subdue or enhance a mixed track’s fragments.

Remember, EQ-ing works on the existing spectrum only by altering the fragments to create novel-sounding effects. EQ audio effects are majorly used to define a character or tone of the soundtrack.

Moreover, you can define different types of sound characters with the help of different EQ audio effects. For instance, a digital plugin EQ is far more transparent sounding when compared to a vintage EQ.

Part 5: Audio effects - Delay and Echo

Delay is yet another type of audio effect that falls under the Time-based category. Adding layers can significantly provide more complexity and depth to a soundtrack.

The foundation to add Reverb or chorus-like other audio effects is furnished by Delay. Hence, it is prominently utilized by several mixing engineers.

The echo also falls under the time-based audio effect, which is developed due to the Delay audio effect. An echoing effect is simulated at various intervals when Delay audio effect features playback heads or “taps” that are heard apart.

If you want to edit audios like a pro, you should use Filmora . It is the best video editor for different users. You can add echo to audio by directly dragging the effect onto the timeline. Download it now to have a try (Free)!

Part 6: Audio effects - Distortion

When an audio circuit is overloaded, it ultimately leads to a clip the signal is termed as Distortion.

This audio effect can be a highly creative tool if used correctly. Distortion pushes the sound to compress and clip by manipulating the original audio signal.

By manipulating the bit rate or the sampling rate, Bit-crushing is achieved. This, eventually, adds harmony to the sound.

Usually, the electric guitars make use of Distortion audio effect but more progressively it is being used over Synths.

Distortion can be acquired using effects units, rackmounts, pedals, VSTs, or at times, built-in amplifiers and pre-amps. Distortion adds complexity and body to your track by making it fatter and fuller.

Part 7: Audio effects - Chorus

Chorus audio effect is referred to the varying sounds that are similar and are heard as one.

For instance, recording the same note piled over each other and is timed and tuned slightly off each other.

This as a whole, creates a chorus effect. In simple words, a group of singers is voicing a song while creating a special sound effect.

The chorus, too, adds complexity and depth to your soundtracks. It is generally used to enhance the harmony or load up the particular track, making the track fuller and layered.

Part 8: Audio effects - Filters

An audio signal’s frequency range can be altered using the Audio filters. With the help of an audio filter, you can easily amplify or boost the frequency range.

Or, can even cut or attenuate a frequency range too. When it comes to categorizing the Audio Filters, they fall under 3 units; HPF (High-pass filters), LPF (Low-pass filters), BPF (Band-pass filters).

Every other filter has a well-defined threshold for boosting or cutting a frequency. They are then categorized depending on the alterations that have been made above or below this threshold.

An Audio filter is a prominent tool used to correct problems and significantly enhance tracks. You can effectively make dramatic effects or add character to the soundtrack with filters.

Conclusion

With this comprehensive discussion on audio effects and various core types of audio effects, it’s now time to conclude this topic. We now believe you have a full understanding of these core audio effects and can effectively use them as per your needs.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Benjamin Arango

Mar 27, 2024• Proven solutions

When it comes to producing music, audio effects are a next-level creative tool that you can make use of to create highly enthralling and creative music/videos.

You can either create audio effects of your own or make use of a predefined royalty-free audio effects template (if you don’t wish to invest, as a beginner).

Audio effects have the power to transform any so-so music into a superior finished track.

For this reason, we’ve specifically tailored this post to help you understand the insights of audio effects. Moreover, we’re also going to get familiar with 7 audio effects that must be known! So, let’s not delay any further and start exploring.

• Part 1: The Definition of Audio Effects
• Part 2: Audio effects - Reverb
• Part 3: Audio effects - Panning
• Part 4: Audio effects - Equalization
• Part 5: Audio effects - Delay and Echo
• Part 6: Audio effects - Distortion
• Part 7: Audio effects - Chorus
• Part 8: Audio effects - Filters

Part 1: The Definition of Audio Effects

Before we get our hands on the different core types of audio effects, we should first understand what audio effects are!

Basically, the audio effects are generated by software or hardware devices by manipulating how an audio signal sounds. One can control the Effects with the help of several parameters.

For instance, rate, drive, or feedback. They come in handy as studio tools during the mixing or recording of music or while playing live.

Here are some core types of audio effects we will discover further in the article.

• Time-based effects include “Reverb” and “Delay and Echo.”
• Spectral effects include the “Equalization (EQ)” and “Panning.”
• Dynamic effects include “Distortion.”
• Modulation effects include “Chorus.”
• And “Filters.”

Part 2: Audio effects - Reverb

Reverb is nothing but an audio effect of many echoes occurring simultaneously.

In other words, sound reaches your ears in two ways. One that directly reaches your eardrums without any obstacles or surfaces.

And the other, a bunch of sound waves that reach your ears after getting bounced off different surfaces. This set of echoes reach your eardrums later and is quieter (due to lesser energy).

You may experience different types of reverb audio effects for different kinds of spaces. Basically, Reverb stands for Reverberation. It happens quite always in our daily life, but we hardly notice it.

For instance, Reverb at tunnels or caves is different from the reverb audio effect of cathedrals or halls.

Reverb audio effects can be generated digitally with the help of reverb plugins to create multiple echoes algorithmically and by manipulating the Delay, level, or frequency response.

Part 3: Audio effects - Panning

The panning audio effect is generally created to cast an illusion that the source of the sound is moving from one position of the stage to another. This is achieved by distributing the sound signal in a multichannel or a stereo field.

Panning audio effect is highly helpful when you need to avoid muddiness or masking (when two tracks/sounds overlap) in your mix. You can position the sound artificially to a specific area of your stereo field.

With the help of an auto-pan, you can define the time span during which the sound must sweep across the stereo field.

Usually, the lead elements like vocals or the low-frequency elements like bassline drums panned to the center. This is because the center is the busiest, and also these sound elements ground your mix.

Part 4: Audio effects - Equalization

The sound frequency that falls into the range from 20 to 20,000 Hz is the audible sound spectrum of human ears. With the EQ technique, this spectrum is split into different sections referred to as bands.

These bands are then used to subdue or enhance a mixed track’s fragments.

Remember, EQ-ing works on the existing spectrum only by altering the fragments to create novel-sounding effects. EQ audio effects are majorly used to define a character or tone of the soundtrack.

Moreover, you can define different types of sound characters with the help of different EQ audio effects. For instance, a digital plugin EQ is far more transparent sounding when compared to a vintage EQ.

Part 5: Audio effects - Delay and Echo

Delay is yet another type of audio effect that falls under the Time-based category. Adding layers can significantly provide more complexity and depth to a soundtrack.

The foundation to add Reverb or chorus-like other audio effects is furnished by Delay. Hence, it is prominently utilized by several mixing engineers.

The echo also falls under the time-based audio effect, which is developed due to the Delay audio effect. An echoing effect is simulated at various intervals when Delay audio effect features playback heads or “taps” that are heard apart.

If you want to edit audios like a pro, you should use Filmora . It is the best video editor for different users. You can add echo to audio by directly dragging the effect onto the timeline. Download it now to have a try (Free)!

Part 6: Audio effects - Distortion

When an audio circuit is overloaded, it ultimately leads to a clip the signal is termed as Distortion.

This audio effect can be a highly creative tool if used correctly. Distortion pushes the sound to compress and clip by manipulating the original audio signal.

By manipulating the bit rate or the sampling rate, Bit-crushing is achieved. This, eventually, adds harmony to the sound.

Usually, the electric guitars make use of Distortion audio effect but more progressively it is being used over Synths.

Distortion can be acquired using effects units, rackmounts, pedals, VSTs, or at times, built-in amplifiers and pre-amps. Distortion adds complexity and body to your track by making it fatter and fuller.

Part 7: Audio effects - Chorus

Chorus audio effect is referred to the varying sounds that are similar and are heard as one.

For instance, recording the same note piled over each other and is timed and tuned slightly off each other.

This as a whole, creates a chorus effect. In simple words, a group of singers is voicing a song while creating a special sound effect.

The chorus, too, adds complexity and depth to your soundtracks. It is generally used to enhance the harmony or load up the particular track, making the track fuller and layered.

Part 8: Audio effects - Filters

An audio signal’s frequency range can be altered using the Audio filters. With the help of an audio filter, you can easily amplify or boost the frequency range.

Or, can even cut or attenuate a frequency range too. When it comes to categorizing the Audio Filters, they fall under 3 units; HPF (High-pass filters), LPF (Low-pass filters), BPF (Band-pass filters).

Every other filter has a well-defined threshold for boosting or cutting a frequency. They are then categorized depending on the alterations that have been made above or below this threshold.

An Audio filter is a prominent tool used to correct problems and significantly enhance tracks. You can effectively make dramatic effects or add character to the soundtrack with filters.

Conclusion

With this comprehensive discussion on audio effects and various core types of audio effects, it’s now time to conclude this topic. We now believe you have a full understanding of these core audio effects and can effectively use them as per your needs.

Benjamin Arango

Benjamin Arango is a writer and a lover of all things video.

Follow @Benjamin Arango

Auditory Enhancements for Photos: A Visionary Approach to Sound Integration

Almost everyone shoots videos and photos now. But sometimes, it’s hard to record videos while boring to capture images. What if a hybrid mingles still images with an audio file? You can add audio to photo easily.

Images with a soundtrack are simpler to create and more interactive than video; they naturally improve the project without time commitment or complexity. The question that appears is; how to add audio to a photo/image and create great multimedia photography?

In this post, we will describe and clear all your queries on how to add audio to photo. Whether you wish to combine audio and image on the computer or add audio to iPhone pictures, you can all find the answer.

In this article

01 [Can I add audio to the photo?](#Part 1)

02 [How to add audio to a photo?](#Part 2)

03 [Secret about adding audio to the photo?](#Part 3)

Part 1 Can I add audio to the photo?

Yes, it’s possible to add audio to photo, and we have various methods to do this. One of the simplest methods is arranging images into slideshows and adding audio.

Yes, there are different ways by which you can add audio to photo online or offline, including both the easiest and most brutal ways. Let’s list out some general courses as follows!

● The first and common way is by making a slideshow or photo collage like a video and adding background music as audio.

● You can use an image collage app or add audio to a photo app for Android or iPhone devices.

● Lastly, you can add audio to the photo online editor or online video editing program and include voiceover or background music.

All in all, it’s possible to add audio to photo provided you’ve to look straightforward and quick ways of doing so.

Part 2 How to add audio to a photo?

ACDSee supports images with embedded audio and photos with associated audio files. Images with embedded audio are JPEG or TIFF images saved inside the photo folder. You can embed audio inside the folder of photos by adding audio to the photo online.

Images with associated audio are photos are merged with individual WAV audio files. The photo folders and their associated audio files contain the same file name and are placed within the same folder.

You can associate any WAV file with a photo by assigning them the same name and locating them in the same folder or adding audio to the photo.

Note: If you rename or move either an audio file or an image file associated with it, you must rename both the folders or they will not associate for longer. It does not apply to photos with embedded audio.

Steps to add audio to photo via ACDSee

Do one of the following:

● Select an image in Manage mode.

● Open an image in View mode.

Step1 Click Tools | Image Audio | Edit

Step2 In the Edit Audio dialog box, click the Browse button

Step3 Select a WAV file and click Save

Step4 If you would like to truncate or clip the audio file, select the Use markers checkbox and drag the Start marker and End marker sliders. Do one of the following

● Click the Truncate button to remove the beginning and end of the audio file (the sections outside of the start and end markers).

● Click the Clip button to remove the audio file section inside the start and end markers.

Step5 To hear a preview of the file, click the Play button

Step6 Click OK

Part 3 Secret about adding audio to the photo?

If you’re looking to add audio to a photo in a straightforward manner, here’s a tip for you than going complex. It’s because the software or programs available are highly problematic when it comes to better understanding. Thus, using the ideal program is the best way out (and a secret)!

We have to admit that customization is quite trendy among the young generation. Customizing a unique album is a cool thing, too.

A professional editing tool would be an ideal helper to do this (hence, the reason you’re here). While a great variety of music management software and video editors support adding audio to images, Wondershare Filmora stands out for its efficiency, simplicity, and robust capability.

To get started, consider a free trial copy of Wondershare Filmora

Step1 Import Media

Hit the “Import” tab to load your songs from ripped CDs or downloaded from the internet.

Then drag and drop your image in a format like JPEG, JPG, JPE, GIF, BMP, DIB, PNG, JFIF, TIFF, TIF to the media library panel. Now you’ll consider using all the imported files displayed as thumbnails in the Media library.

Step2 Drag and Drop to add photos to audio

Drag songs and photos from the Media Library to the Timeline accordingly.

Filmora assists you in adding various photos to the audio. You can highlight the image and hover your mouse to the last section.

Click the “set duration” icon on the toolbar and set it to fit your music file’s length.

Tips: You can zoom-out or zoom-in on the Timeline in the top right corner by dragging the timeline slider to find the ideal position easily.

Check the effect in the preview window after this. If possible, you can ramp up your creation, e.g., add captions, apply special effects, transitions, and even create a picture-in-picture effect.

Step3 Save Music with Photos

When you’re satisfied with the outcomes, hit the Export tab.

Then, select MP4 under the format tab in the output window, or if you want to play the media on your phone, you can choose the device in the Export window and choose target devices among iPad, iPhone, or Apple TV, etc. Filmora will create a proper setting for phone device saving.

Bonus tips

Rip audio from video: If you wish to extract audio from a movie trailer, film, comedy, TV show, etc., highlight the video file in the Timeline tab, right-click it and choose the “Audio Detach” tab, then you can eliminate the original video stream and save in a new MP3 format, and now you can freely add your images to the ripped music.

Or, you can delete the original audio file and add a new one.

Conclusion

So, that’s all you had to know about adding audio to photo. We’ve discussed all the questions you’re wandering on how to add audio to photo online and mentioned the different ways by which you can do the same.

As the uploading speed is slow, we highly suggest using Filmora to add audio to photos. Besides, Filmora provides 50 plus sounds that you can use. Try it now!

02 [How to add audio to a photo?](#Part 2)

03 [Secret about adding audio to the photo?](#Part 3)

Part 1 Can I add audio to the photo?

Yes, it’s possible to add audio to photo, and we have various methods to do this. One of the simplest methods is arranging images into slideshows and adding audio.

Yes, there are different ways by which you can add audio to photo online or offline, including both the easiest and most brutal ways. Let’s list out some general courses as follows!

● The first and common way is by making a slideshow or photo collage like a video and adding background music as audio.

● You can use an image collage app or add audio to a photo app for Android or iPhone devices.

● Lastly, you can add audio to the photo online editor or online video editing program and include voiceover or background music.

All in all, it’s possible to add audio to photo provided you’ve to look straightforward and quick ways of doing so.

Part 2 How to add audio to a photo?

ACDSee supports images with embedded audio and photos with associated audio files. Images with embedded audio are JPEG or TIFF images saved inside the photo folder. You can embed audio inside the folder of photos by adding audio to the photo online.

Images with associated audio are photos are merged with individual WAV audio files. The photo folders and their associated audio files contain the same file name and are placed within the same folder.

You can associate any WAV file with a photo by assigning them the same name and locating them in the same folder or adding audio to the photo.

Note: If you rename or move either an audio file or an image file associated with it, you must rename both the folders or they will not associate for longer. It does not apply to photos with embedded audio.

Steps to add audio to photo via ACDSee

Do one of the following:

● Select an image in Manage mode.

● Open an image in View mode.

Step1 Click Tools | Image Audio | Edit

Step2 In the Edit Audio dialog box, click the Browse button

Step3 Select a WAV file and click Save

Step4 If you would like to truncate or clip the audio file, select the Use markers checkbox and drag the Start marker and End marker sliders. Do one of the following

● Click the Truncate button to remove the beginning and end of the audio file (the sections outside of the start and end markers).

● Click the Clip button to remove the audio file section inside the start and end markers.

Step5 To hear a preview of the file, click the Play button

Step6 Click OK

Part 3 Secret about adding audio to the photo?

If you’re looking to add audio to a photo in a straightforward manner, here’s a tip for you than going complex. It’s because the software or programs available are highly problematic when it comes to better understanding. Thus, using the ideal program is the best way out (and a secret)!

We have to admit that customization is quite trendy among the young generation. Customizing a unique album is a cool thing, too.

A professional editing tool would be an ideal helper to do this (hence, the reason you’re here). While a great variety of music management software and video editors support adding audio to images, Wondershare Filmora stands out for its efficiency, simplicity, and robust capability.

To get started, consider a free trial copy of Wondershare Filmora

Step1 Import Media

Hit the “Import” tab to load your songs from ripped CDs or downloaded from the internet.

Then drag and drop your image in a format like JPEG, JPG, JPE, GIF, BMP, DIB, PNG, JFIF, TIFF, TIF to the media library panel. Now you’ll consider using all the imported files displayed as thumbnails in the Media library.

Step2 Drag and Drop to add photos to audio

Drag songs and photos from the Media Library to the Timeline accordingly.

Filmora assists you in adding various photos to the audio. You can highlight the image and hover your mouse to the last section.

Click the “set duration” icon on the toolbar and set it to fit your music file’s length.

Tips: You can zoom-out or zoom-in on the Timeline in the top right corner by dragging the timeline slider to find the ideal position easily.

Check the effect in the preview window after this. If possible, you can ramp up your creation, e.g., add captions, apply special effects, transitions, and even create a picture-in-picture effect.

Step3 Save Music with Photos

When you’re satisfied with the outcomes, hit the Export tab.

Then, select MP4 under the format tab in the output window, or if you want to play the media on your phone, you can choose the device in the Export window and choose target devices among iPad, iPhone, or Apple TV, etc. Filmora will create a proper setting for phone device saving.

Bonus tips

Rip audio from video: If you wish to extract audio from a movie trailer, film, comedy, TV show, etc., highlight the video file in the Timeline tab, right-click it and choose the “Audio Detach” tab, then you can eliminate the original video stream and save in a new MP3 format, and now you can freely add your images to the ripped music.

Or, you can delete the original audio file and add a new one.

Conclusion

So, that’s all you had to know about adding audio to photo. We’ve discussed all the questions you’re wandering on how to add audio to photo online and mentioned the different ways by which you can do the same.

As the uploading speed is slow, we highly suggest using Filmora to add audio to photos. Besides, Filmora provides 50 plus sounds that you can use. Try it now!

02 [How to add audio to a photo?](#Part 2)

03 [Secret about adding audio to the photo?](#Part 3)

Part 1 Can I add audio to the photo?

Yes, it’s possible to add audio to photo, and we have various methods to do this. One of the simplest methods is arranging images into slideshows and adding audio.

Yes, there are different ways by which you can add audio to photo online or offline, including both the easiest and most brutal ways. Let’s list out some general courses as follows!

● The first and common way is by making a slideshow or photo collage like a video and adding background music as audio.

● You can use an image collage app or add audio to a photo app for Android or iPhone devices.

● Lastly, you can add audio to the photo online editor or online video editing program and include voiceover or background music.

All in all, it’s possible to add audio to photo provided you’ve to look straightforward and quick ways of doing so.

Part 2 How to add audio to a photo?

ACDSee supports images with embedded audio and photos with associated audio files. Images with embedded audio are JPEG or TIFF images saved inside the photo folder. You can embed audio inside the folder of photos by adding audio to the photo online.

Images with associated audio are photos are merged with individual WAV audio files. The photo folders and their associated audio files contain the same file name and are placed within the same folder.

You can associate any WAV file with a photo by assigning them the same name and locating them in the same folder or adding audio to the photo.

Note: If you rename or move either an audio file or an image file associated with it, you must rename both the folders or they will not associate for longer. It does not apply to photos with embedded audio.

Steps to add audio to photo via ACDSee

Do one of the following:

● Select an image in Manage mode.

● Open an image in View mode.

Step1 Click Tools | Image Audio | Edit

Step2 In the Edit Audio dialog box, click the Browse button

Step3 Select a WAV file and click Save

Step4 If you would like to truncate or clip the audio file, select the Use markers checkbox and drag the Start marker and End marker sliders. Do one of the following

● Click the Truncate button to remove the beginning and end of the audio file (the sections outside of the start and end markers).

● Click the Clip button to remove the audio file section inside the start and end markers.

Step5 To hear a preview of the file, click the Play button

Step6 Click OK

Part 3 Secret about adding audio to the photo?

If you’re looking to add audio to a photo in a straightforward manner, here’s a tip for you than going complex. It’s because the software or programs available are highly problematic when it comes to better understanding. Thus, using the ideal program is the best way out (and a secret)!

We have to admit that customization is quite trendy among the young generation. Customizing a unique album is a cool thing, too.

A professional editing tool would be an ideal helper to do this (hence, the reason you’re here). While a great variety of music management software and video editors support adding audio to images, Wondershare Filmora stands out for its efficiency, simplicity, and robust capability.

To get started, consider a free trial copy of Wondershare Filmora

Step1 Import Media

Hit the “Import” tab to load your songs from ripped CDs or downloaded from the internet.

Then drag and drop your image in a format like JPEG, JPG, JPE, GIF, BMP, DIB, PNG, JFIF, TIFF, TIF to the media library panel. Now you’ll consider using all the imported files displayed as thumbnails in the Media library.

Step2 Drag and Drop to add photos to audio

Drag songs and photos from the Media Library to the Timeline accordingly.

Filmora assists you in adding various photos to the audio. You can highlight the image and hover your mouse to the last section.

Click the “set duration” icon on the toolbar and set it to fit your music file’s length.

Tips: You can zoom-out or zoom-in on the Timeline in the top right corner by dragging the timeline slider to find the ideal position easily.

Check the effect in the preview window after this. If possible, you can ramp up your creation, e.g., add captions, apply special effects, transitions, and even create a picture-in-picture effect.

Step3 Save Music with Photos

When you’re satisfied with the outcomes, hit the Export tab.

Then, select MP4 under the format tab in the output window, or if you want to play the media on your phone, you can choose the device in the Export window and choose target devices among iPad, iPhone, or Apple TV, etc. Filmora will create a proper setting for phone device saving.

Bonus tips

Rip audio from video: If you wish to extract audio from a movie trailer, film, comedy, TV show, etc., highlight the video file in the Timeline tab, right-click it and choose the “Audio Detach” tab, then you can eliminate the original video stream and save in a new MP3 format, and now you can freely add your images to the ripped music.

Or, you can delete the original audio file and add a new one.

Conclusion

So, that’s all you had to know about adding audio to photo. We’ve discussed all the questions you’re wandering on how to add audio to photo online and mentioned the different ways by which you can do the same.

As the uploading speed is slow, we highly suggest using Filmora to add audio to photos. Besides, Filmora provides 50 plus sounds that you can use. Try it now!

02 [How to add audio to a photo?](#Part 2)

03 [Secret about adding audio to the photo?](#Part 3)

Part 1 Can I add audio to the photo?

Yes, it’s possible to add audio to photo, and we have various methods to do this. One of the simplest methods is arranging images into slideshows and adding audio.

Yes, there are different ways by which you can add audio to photo online or offline, including both the easiest and most brutal ways. Let’s list out some general courses as follows!

● The first and common way is by making a slideshow or photo collage like a video and adding background music as audio.

● You can use an image collage app or add audio to a photo app for Android or iPhone devices.

● Lastly, you can add audio to the photo online editor or online video editing program and include voiceover or background music.

All in all, it’s possible to add audio to photo provided you’ve to look straightforward and quick ways of doing so.

Part 2 How to add audio to a photo?

ACDSee supports images with embedded audio and photos with associated audio files. Images with embedded audio are JPEG or TIFF images saved inside the photo folder. You can embed audio inside the folder of photos by adding audio to the photo online.

Images with associated audio are photos are merged with individual WAV audio files. The photo folders and their associated audio files contain the same file name and are placed within the same folder.

You can associate any WAV file with a photo by assigning them the same name and locating them in the same folder or adding audio to the photo.

Note: If you rename or move either an audio file or an image file associated with it, you must rename both the folders or they will not associate for longer. It does not apply to photos with embedded audio.

Steps to add audio to photo via ACDSee

Do one of the following:

● Select an image in Manage mode.

● Open an image in View mode.

Step1 Click Tools | Image Audio | Edit

Step2 In the Edit Audio dialog box, click the Browse button

Step3 Select a WAV file and click Save

Step4 If you would like to truncate or clip the audio file, select the Use markers checkbox and drag the Start marker and End marker sliders. Do one of the following

● Click the Truncate button to remove the beginning and end of the audio file (the sections outside of the start and end markers).

● Click the Clip button to remove the audio file section inside the start and end markers.

Step5 To hear a preview of the file, click the Play button

Step6 Click OK

Part 3 Secret about adding audio to the photo?

If you’re looking to add audio to a photo in a straightforward manner, here’s a tip for you than going complex. It’s because the software or programs available are highly problematic when it comes to better understanding. Thus, using the ideal program is the best way out (and a secret)!

We have to admit that customization is quite trendy among the young generation. Customizing a unique album is a cool thing, too.

A professional editing tool would be an ideal helper to do this (hence, the reason you’re here). While a great variety of music management software and video editors support adding audio to images, Wondershare Filmora stands out for its efficiency, simplicity, and robust capability.

To get started, consider a free trial copy of Wondershare Filmora

Step1 Import Media

Hit the “Import” tab to load your songs from ripped CDs or downloaded from the internet.

Then drag and drop your image in a format like JPEG, JPG, JPE, GIF, BMP, DIB, PNG, JFIF, TIFF, TIF to the media library panel. Now you’ll consider using all the imported files displayed as thumbnails in the Media library.

Step2 Drag and Drop to add photos to audio

Drag songs and photos from the Media Library to the Timeline accordingly.

Filmora assists you in adding various photos to the audio. You can highlight the image and hover your mouse to the last section.

Click the “set duration” icon on the toolbar and set it to fit your music file’s length.

Tips: You can zoom-out or zoom-in on the Timeline in the top right corner by dragging the timeline slider to find the ideal position easily.

Check the effect in the preview window after this. If possible, you can ramp up your creation, e.g., add captions, apply special effects, transitions, and even create a picture-in-picture effect.

Step3 Save Music with Photos

When you’re satisfied with the outcomes, hit the Export tab.

Then, select MP4 under the format tab in the output window, or if you want to play the media on your phone, you can choose the device in the Export window and choose target devices among iPad, iPhone, or Apple TV, etc. Filmora will create a proper setting for phone device saving.

Bonus tips

Rip audio from video: If you wish to extract audio from a movie trailer, film, comedy, TV show, etc., highlight the video file in the Timeline tab, right-click it and choose the “Audio Detach” tab, then you can eliminate the original video stream and save in a new MP3 format, and now you can freely add your images to the ripped music.

Or, you can delete the original audio file and add a new one.

Conclusion

So, that’s all you had to know about adding audio to photo. We’ve discussed all the questions you’re wandering on how to add audio to photo online and mentioned the different ways by which you can do the same.

As the uploading speed is slow, we highly suggest using Filmora to add audio to photos. Besides, Filmora provides 50 plus sounds that you can use. Try it now!

Also read: