Achieving Balanced Sound with VLC: An In-Depth Look at Volume Normalization

How To Normalize Volume in VLC

How to normalize volume, why should we do it, and what is it after all? – these are the questions when it comes to editing our audio files, as well as the video clips we tend to change the sound of. So, first of all, the volume normalization is pretty much explained as follows: The process when a constant amount of gain is applied to the audio recording, bringing the amplitude to a desirable level, which is “the norm” for the project. If it is a little bit difficult to understand, we have to highlight that when this tool is applied to our volume, the whole recording has the same amount of gain across it, every piece affected the same way. Accordingly, when we normalize volume, the relative dynamics are not changed.

But, why bother at all and why not leave it the way it is? Well, the answer to this is almost the same as on why editing exists in general, right? Things are not perfect! This is the fact that prompts us to make our video clips and audio better, improve it at least on the level which can get us the right amount of viewers and listeners. Everyone have had some pain listening to several podcasts, when the volume was too high or too low, or there were so much background noise that the whole recording was hurting the ears of a person! People will not convert to being loyal subscribers, viewers and listeners if their user experience is not favored. So, it is in our best interest to serve their best interest, with a little bit of editing.

When it comes to normalizing audio, there are two reasons we refer to this tool. First is when we feel we need to get the maximum volume, and the second is when we need to match different volumes.

In the first case, you might have somewhat quite voice recording, and would like to make it better without changing its dynamic range, while making it as loud as possible. And when it comes to matching volumes, it is logical that you need to manipulate your editing this way in case you have a group of audio files, each or some of them are at different volumes, so, understandably, if not necessarily, you would like to make them come closer to the same volume.

So, until we give you the step-by step guide on how to normalize your volume in VLC player, we also need to inform you about audio normalization types. Here, generally, we come across three of them: a so-called peak normalization, helping adjust the recording based on the highest signal level present in the recording; another is called loudness normalization and it adjusts the recording based on perceived loudness. Last but not least, RMS (Root-Mean-Square), changes the value of all the samples, where their average electrical volume overall is a specified level.

Using any of this, making it better to listen to your voice, without people being annoyed and their ears becoming exhausting with what you have to offer, you will be making it enjoyable for them and easy to come back to your content, as they will not be obliged to change the volume on their own audio players. Instead, their experience with you will be calm and effortless, which you are aiming to achieve.

So, not, what about VLC? – this is a very popular media player, favorite for a lot of people all around the world, so you should already be quite familiar with what it is, at least by having streamed videos and movies there. Speaking more of what it represents, it is a free-to-use, robust, and feature-packed software that plays a wide range of audio, image, and video files. It is worth noting that it can also play multimedia files directly from extractable devices or the PC and additionally, the program can stream from popular websites such as Disney+, Hulu, Netflix, and so on.

As if it was not enough, you can do simple video and audio editing in VLC Media Player, which a lot of people are unaware of! For example, you can easily trim and cut videos. So, as it happens, we can also normalize volume in VLC Media Player. It is a very handy feature and it works on Windows as well as on Mac. Sooo… How to do that? Because, actually, it is so simple that you might be surprised you didn’t know about this earlier. To learn how to normalize volume in VLC, follow this simple guideline:

First, of course, as every time working with any software, you need to have VLC Media Player installed on your device. Once you have it installed, open VLC. Go to the Tools and Preferences and there, you will need to check the single box which is next to Normalize volume in Effects. Now, set the level to the one that works best for you. Then, when you are happy with the result, you can Save.

This is not something perfect, because it’s so simple to do and actually what it does is just help adjust the general volume, so it leaves the specifics alone.

But, it might be the case that you are not so satisfied with the simple editing and want a little more to get from the editing process on VLC. So, you can do more with the Audio Effects menu there. And the steps are as follows:

First, on your VLC player, find Tools and then, in the menu, go to Preferences. The window will open, and there you need to select All in Show settings – actually it is a little bit hard to find because this is in the bottom left corner of the window. From there, you will need to navigate to Audio, and then, a little below, click on Filters and highlight it. The checkbox next to the Dynamic range compressor will probably be unchecked – so, check in it.

Next, see where Compressor is in the left panel? Select it. And now, you are free to make the changes to the levels as you see fit.

Here, if you are a little bit overwhelmed with the wide range of options to work on, you can just concentrate the most on Makeup gain, Threshold, and Ratio. The first one is by which you adjust in quiet sequences to raise the volume, the second will help you reduce louder sequences to even things out, and ratio is the maximum level of all audio within a movie, let’s say.

Don’t underestimate Attack time and release time, either. They graduate the changes to ramp them up at first, then down again, rather than initiating them immediately. So, if you set them to your liking as well, this will ensure that you have a more fluid transition in and out of the scene and there are less sudden, sometimes scary volume changes.

Therefore, you are now equipped with the most information you will need to normalize volume in VLC Player – so free to give it a go, play around with the different settings and carry out the best result imaginable for you!

How to normalize audio in Wondershare Filmora?

Now, even though we already know how to normalize audio in VLC in the simplest, as well as in the more advanced way, it might be even better if we know some more about normalizing audios in different programs. Something worth discussing is a software called Wondershare Filmora , which carries out the same task wonderfully. Although, unlike VLC Media Player, it is a real video editor , but don’t panic if you have never laid your hand on editing – it is one of the easiest to use ini the word, operating also both on Mac and Windows, and its interface is utterly understandable for beginners right away. And, actually, it is a qhile that Wondershare Filmora X introduced the feature to normalize the audio for the first time. What to say more - you might want to stop now and download the latest version of Filmora because now we are about to learn how to normalize audio from the video there – so, tune in!

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

Free Download For macOS 10.14 or later

When it is done installing, open the software. Now, click and drag the video of which the audio you want to normalize. Now you can select the clip you have chosen – if there are multiple, select all of them, then right-click and choose Detach Audio.

Now if you have this kind of graphic before your eyes, you can be pretty sure without even listening, that the noises are really, really different from each other, which highlights once again how useful audio normalization can be:

Select these files, right-click and choose Adjust Audio. New panel will be opened on left top and there, you will see Audio Normalization – check the box there.

After you have clicked on it, wait until the normalization completes.

Soon, all audio will be normalized, and you will already be able to see on the graphics that the volumes are almost on the same level and when you listen to it, you will make sure that there is no longer apparent difference between how they sound. And from there on, you can save the file you just normalized!

So, in this article, we learned a lot about normalizing volumes, why and how it is done, and, more specifically, how to get this task completed in VLC Media Player as well as in Wondershare Filmora X. you can proceed to putting this new information into a good use and come back to learn more about video and audio editing here!

The Ultimate Guide to Audacity’s Free Audio Post-Production Capabilities, Including Automated Tuning

Audacity is one of the well-known multi-track audio recorders with in-built audio editing tools. It allows adding effects to tweak audio recordings and songs. In short, it incorporates vocal effects to produce better quality audios. You might not find an autotune feature when correcting the pitch of the song in Audacity software. Moreover, there are no inbuilt tools for tuning recordings.

However, GSnap is one of the free plugins that enable you to autotune in Audacity. GSnap plugin is compatible with Windows, Mac, and Linux operating systems. So, you can download it on any one of them to adjust the pitch of audio recordings. The following article will give you in-depth information about Audacity autotune. Let’s begin.

In this article

01 What is Auto Tune and How Does It Work?

02 Top 3 Best Free Autotune Plugins for Audacity

03 How to AutoTune Your Voice for Free with GSnap on Audacity?

Part 1: What is Auto Tune and How Does It Work?

Autotune is a tool that enables you to adjust the pitch of the audio song or recording. It was launched in 1997. The plugin enjoys a trademark from Antares Audio Technologies. It automatically corrects the out-of-tune vocals in your recording.So, if you are struggling with tuning issues after recording a song in software like Audacity, this Audacity autotune tool can help.

Using autotune plugins is one of the best options to autotune songs in Audacity. They are becoming increasingly popular among singers, music producers, and others. Do you want to know why audio recordings need to be tuned and how they are adjusted using autotune? Here’s the answer.

There are high chances of multiple frequencies becoming intertwined when recording audio. Autotune detects the frequencies that are intertwined and splits them into single frequencies. So, the over-tuned vocals are isolated. In brief, autotune is the process of correcting vocal pitch. There are several plugins that can help you deal with tuning issues on piano, guitar, and other musical instruments.

Part 2: Top 3 Best Free Autotune Plugins for Audacity

Audacity comes with built-in audio recording and editing tools. It also allows you to mix different audios. Plus, you can also cut, split, and splice audio files in this amazing software. However, if you are recording a song in Audacity, it won’t be autotuned. Moreover, you cannot auto-correct the song’s pitch by default. So, you need to install autotune plugins for Audacity recording to enhance your vocal performance.

There are a number of plugins that enable you to fine-tune audios in Audacity. If you are interested in mastering the art of autotune using plugins, we have handpicked the following three best free autotune plugins for Audacity. Let’s get into them one by one.

1. GSnap

GSnap is a free audacity autotune plugin offered by GVST. It enables users to fine-tune the vocalist’s pitch, which is also a very easy and quick process. So, you can refine out-of-tune audio using GSnap. The correction mechanism is simple. First, it identifies over-tuned frequencies and then corrects them. Do you want to know more about GSnap and its advantages? If yes, we have summarized all its features in the list below.

Advantages

• GSnap enables you to configure both high and low frequency to offer the best pitch-correction mechanism.
• Background noise can be filtered out by configuring decibel settings.
• Allows controlling the parameters of a vocal performance through Musical Instrument Digital Interface (MIDI).
• GSnap lets you control the pace.
• Enables calibrating tune
• Free and easily accessible
• Available for Windows operating systems
• Maximum pitch bend can be set
• Customizable speed parameters
• Tune calibration

2. MAutoPitch

MAutoPitch provides automatic tuning for audio recording. This plugin comes with a simple yet intuitive interface to facilitate users. It supports pitch correction for all mainstream musical instruments and vocals. In addition to autotuning, MAuto Pitch is also known for offering creativity in your audio recordings. Stereo expansion is one of the creative features provided in this plugin. Furthermore, it also incorporates formant shift.

It applies the channel separation technique to tune the vocals. Moreover, it incorporates a MIDI controller that enables you to control parameters in real-time audio recording. MAutoPitch offers the following benefits to the users.

Advantages

• Offers safety brick wall limiters to limit audio output to a standardized threshold.
• Utilizes efficient and robust algorithms to cope up with fast computers.
• Advanced GUI to maximize flexibility.
• It includes automatic gain compensation to align input loudness with output loudness.
• Compatible with both Windows and Mac
• Easily accessible without internet
• Free updates
• Unique visualization engine

3. Graillon

Graillon is an auto-tuner with the capacity to take your vocal performance to the next level. It comes with unique features, such as pitch-tracking modulation. This can help you change the input voice. Moreover, it also enables users to create choruses. In short, it makes the voice recording pure. In addition to pitch correction, Graillon also performs the pitch-shifting function. So, it’s an ideal solution for people looking for autotuning tools. Here is a brief overview of the pros of Graillon.

Advantages

• Incorporates 23ms of latency
• Maximizes the sound quality of output
• Optimized pitch shifter
• Ability to produce robotic sounds
• Free access to the tool
• Allows altering the vocal pitch
• Compatibility with all mainstream operating systems including Windows, Mac, Linux, and others
• Simple interface
• Equipped with bit crusher
• A full edition version is also available, which provides state-of-the-art features

Part 3: How to AutoTune Your Voice for Free with GSnap on Audacity?

GSnap is a famous plugin for autotuning audio recordings in Audacity. This plugin is free and can be easily installed on Windows, Mac, and Linux operating systems. If you are wondering how to install and use this plugin to autotune your voice in Audacity, the step-by-step guide highlights the process below.

Step 1: Install GSnap

Access the web link https://www.gvst.co.uk/gsnap.htm and click on download GSnap. Choose the GSnap version that matches your operating system.

Note: Audacity must be installed on your computer before the GSnap plugin is downloaded. Plus, the plugin will be downloaded in a zipped file. So, make sure you have an application installed on your device to unzip the downloaded file.

Step 2: Copy GSnap

Navigate to the download folder and right-click on the zipped GSnap option. Select extract here from the menu and copy the file named GSnap.dll.

Step 3: Paste the copied file

Navigate the plugins folder of Audacity and paste the copied file into the folder.

Step 3: Add plugin

Open Audacity and locate the Effects tab on a recording window. Select add/remove plug-ins, click on the GSnap option, and press enable button.

Note: The GSnap plugin will appear in the list under the effects tab and let you autotune your voice recording. You need to configure settings in a GSnap to get the fine-tuned voice.

For the detailed information, you can check the tutorial about how to add and set up GSnap plugin in Audacity.

Conclusion

Human voices and inputs from musical instruments are not perfect by default. Voice recordings in Audacity are no exception. They also need to be processed to enhance the vocal presentation. So, you need to tune the vocals in one way or another. This article mentions free Audacity autotune tools like GSnap to produce better sounds.

02 Top 3 Best Free Autotune Plugins for Audacity

03 How to AutoTune Your Voice for Free with GSnap on Audacity?

Part 1: What is Auto Tune and How Does It Work?

Autotune is a tool that enables you to adjust the pitch of the audio song or recording. It was launched in 1997. The plugin enjoys a trademark from Antares Audio Technologies. It automatically corrects the out-of-tune vocals in your recording.So, if you are struggling with tuning issues after recording a song in software like Audacity, this Audacity autotune tool can help.

Using autotune plugins is one of the best options to autotune songs in Audacity. They are becoming increasingly popular among singers, music producers, and others. Do you want to know why audio recordings need to be tuned and how they are adjusted using autotune? Here’s the answer.

There are high chances of multiple frequencies becoming intertwined when recording audio. Autotune detects the frequencies that are intertwined and splits them into single frequencies. So, the over-tuned vocals are isolated. In brief, autotune is the process of correcting vocal pitch. There are several plugins that can help you deal with tuning issues on piano, guitar, and other musical instruments.

Part 2: Top 3 Best Free Autotune Plugins for Audacity

Audacity comes with built-in audio recording and editing tools. It also allows you to mix different audios. Plus, you can also cut, split, and splice audio files in this amazing software. However, if you are recording a song in Audacity, it won’t be autotuned. Moreover, you cannot auto-correct the song’s pitch by default. So, you need to install autotune plugins for Audacity recording to enhance your vocal performance.

There are a number of plugins that enable you to fine-tune audios in Audacity. If you are interested in mastering the art of autotune using plugins, we have handpicked the following three best free autotune plugins for Audacity. Let’s get into them one by one.

1. GSnap

GSnap is a free audacity autotune plugin offered by GVST. It enables users to fine-tune the vocalist’s pitch, which is also a very easy and quick process. So, you can refine out-of-tune audio using GSnap. The correction mechanism is simple. First, it identifies over-tuned frequencies and then corrects them. Do you want to know more about GSnap and its advantages? If yes, we have summarized all its features in the list below.

Advantages

• GSnap enables you to configure both high and low frequency to offer the best pitch-correction mechanism.
• Background noise can be filtered out by configuring decibel settings.
• Allows controlling the parameters of a vocal performance through Musical Instrument Digital Interface (MIDI).
• GSnap lets you control the pace.
• Enables calibrating tune
• Free and easily accessible
• Available for Windows operating systems
• Maximum pitch bend can be set
• Customizable speed parameters
• Tune calibration

2. MAutoPitch

MAutoPitch provides automatic tuning for audio recording. This plugin comes with a simple yet intuitive interface to facilitate users. It supports pitch correction for all mainstream musical instruments and vocals. In addition to autotuning, MAuto Pitch is also known for offering creativity in your audio recordings. Stereo expansion is one of the creative features provided in this plugin. Furthermore, it also incorporates formant shift.

It applies the channel separation technique to tune the vocals. Moreover, it incorporates a MIDI controller that enables you to control parameters in real-time audio recording. MAutoPitch offers the following benefits to the users.

Advantages

• Offers safety brick wall limiters to limit audio output to a standardized threshold.
• Utilizes efficient and robust algorithms to cope up with fast computers.
• Advanced GUI to maximize flexibility.
• It includes automatic gain compensation to align input loudness with output loudness.
• Compatible with both Windows and Mac
• Easily accessible without internet
• Free updates
• Unique visualization engine

3. Graillon

Graillon is an auto-tuner with the capacity to take your vocal performance to the next level. It comes with unique features, such as pitch-tracking modulation. This can help you change the input voice. Moreover, it also enables users to create choruses. In short, it makes the voice recording pure. In addition to pitch correction, Graillon also performs the pitch-shifting function. So, it’s an ideal solution for people looking for autotuning tools. Here is a brief overview of the pros of Graillon.

Advantages

• Incorporates 23ms of latency
• Maximizes the sound quality of output
• Optimized pitch shifter
• Ability to produce robotic sounds
• Free access to the tool
• Allows altering the vocal pitch
• Compatibility with all mainstream operating systems including Windows, Mac, Linux, and others
• Simple interface
• Equipped with bit crusher
• A full edition version is also available, which provides state-of-the-art features

Part 3: How to AutoTune Your Voice for Free with GSnap on Audacity?

GSnap is a famous plugin for autotuning audio recordings in Audacity. This plugin is free and can be easily installed on Windows, Mac, and Linux operating systems. If you are wondering how to install and use this plugin to autotune your voice in Audacity, the step-by-step guide highlights the process below.

Step 1: Install GSnap

Access the web link https://www.gvst.co.uk/gsnap.htm and click on download GSnap. Choose the GSnap version that matches your operating system.

Note: Audacity must be installed on your computer before the GSnap plugin is downloaded. Plus, the plugin will be downloaded in a zipped file. So, make sure you have an application installed on your device to unzip the downloaded file.

Step 2: Copy GSnap

Navigate to the download folder and right-click on the zipped GSnap option. Select extract here from the menu and copy the file named GSnap.dll.

Step 3: Paste the copied file

Navigate the plugins folder of Audacity and paste the copied file into the folder.

Step 3: Add plugin

Open Audacity and locate the Effects tab on a recording window. Select add/remove plug-ins, click on the GSnap option, and press enable button.

Note: The GSnap plugin will appear in the list under the effects tab and let you autotune your voice recording. You need to configure settings in a GSnap to get the fine-tuned voice.

For the detailed information, you can check the tutorial about how to add and set up GSnap plugin in Audacity.

Conclusion

Human voices and inputs from musical instruments are not perfect by default. Voice recordings in Audacity are no exception. They also need to be processed to enhance the vocal presentation. So, you need to tune the vocals in one way or another. This article mentions free Audacity autotune tools like GSnap to produce better sounds.

02 Top 3 Best Free Autotune Plugins for Audacity

03 How to AutoTune Your Voice for Free with GSnap on Audacity?

Part 1: What is Auto Tune and How Does It Work?

Autotune is a tool that enables you to adjust the pitch of the audio song or recording. It was launched in 1997. The plugin enjoys a trademark from Antares Audio Technologies. It automatically corrects the out-of-tune vocals in your recording.So, if you are struggling with tuning issues after recording a song in software like Audacity, this Audacity autotune tool can help.

Using autotune plugins is one of the best options to autotune songs in Audacity. They are becoming increasingly popular among singers, music producers, and others. Do you want to know why audio recordings need to be tuned and how they are adjusted using autotune? Here’s the answer.

There are high chances of multiple frequencies becoming intertwined when recording audio. Autotune detects the frequencies that are intertwined and splits them into single frequencies. So, the over-tuned vocals are isolated. In brief, autotune is the process of correcting vocal pitch. There are several plugins that can help you deal with tuning issues on piano, guitar, and other musical instruments.

Part 2: Top 3 Best Free Autotune Plugins for Audacity

Audacity comes with built-in audio recording and editing tools. It also allows you to mix different audios. Plus, you can also cut, split, and splice audio files in this amazing software. However, if you are recording a song in Audacity, it won’t be autotuned. Moreover, you cannot auto-correct the song’s pitch by default. So, you need to install autotune plugins for Audacity recording to enhance your vocal performance.

There are a number of plugins that enable you to fine-tune audios in Audacity. If you are interested in mastering the art of autotune using plugins, we have handpicked the following three best free autotune plugins for Audacity. Let’s get into them one by one.

1. GSnap

GSnap is a free audacity autotune plugin offered by GVST. It enables users to fine-tune the vocalist’s pitch, which is also a very easy and quick process. So, you can refine out-of-tune audio using GSnap. The correction mechanism is simple. First, it identifies over-tuned frequencies and then corrects them. Do you want to know more about GSnap and its advantages? If yes, we have summarized all its features in the list below.

Advantages

• GSnap enables you to configure both high and low frequency to offer the best pitch-correction mechanism.
• Background noise can be filtered out by configuring decibel settings.
• Allows controlling the parameters of a vocal performance through Musical Instrument Digital Interface (MIDI).
• GSnap lets you control the pace.
• Enables calibrating tune
• Free and easily accessible
• Available for Windows operating systems
• Maximum pitch bend can be set
• Customizable speed parameters
• Tune calibration

2. MAutoPitch

MAutoPitch provides automatic tuning for audio recording. This plugin comes with a simple yet intuitive interface to facilitate users. It supports pitch correction for all mainstream musical instruments and vocals. In addition to autotuning, MAuto Pitch is also known for offering creativity in your audio recordings. Stereo expansion is one of the creative features provided in this plugin. Furthermore, it also incorporates formant shift.

It applies the channel separation technique to tune the vocals. Moreover, it incorporates a MIDI controller that enables you to control parameters in real-time audio recording. MAutoPitch offers the following benefits to the users.

Advantages

• Offers safety brick wall limiters to limit audio output to a standardized threshold.
• Utilizes efficient and robust algorithms to cope up with fast computers.
• Advanced GUI to maximize flexibility.
• It includes automatic gain compensation to align input loudness with output loudness.
• Compatible with both Windows and Mac
• Easily accessible without internet
• Free updates
• Unique visualization engine

3. Graillon

Graillon is an auto-tuner with the capacity to take your vocal performance to the next level. It comes with unique features, such as pitch-tracking modulation. This can help you change the input voice. Moreover, it also enables users to create choruses. In short, it makes the voice recording pure. In addition to pitch correction, Graillon also performs the pitch-shifting function. So, it’s an ideal solution for people looking for autotuning tools. Here is a brief overview of the pros of Graillon.

Advantages

• Incorporates 23ms of latency
• Maximizes the sound quality of output
• Optimized pitch shifter
• Ability to produce robotic sounds
• Free access to the tool
• Allows altering the vocal pitch
• Compatibility with all mainstream operating systems including Windows, Mac, Linux, and others
• Simple interface
• Equipped with bit crusher
• A full edition version is also available, which provides state-of-the-art features

Part 3: How to AutoTune Your Voice for Free with GSnap on Audacity?

GSnap is a famous plugin for autotuning audio recordings in Audacity. This plugin is free and can be easily installed on Windows, Mac, and Linux operating systems. If you are wondering how to install and use this plugin to autotune your voice in Audacity, the step-by-step guide highlights the process below.

Step 1: Install GSnap

Access the web link https://www.gvst.co.uk/gsnap.htm and click on download GSnap. Choose the GSnap version that matches your operating system.

Note: Audacity must be installed on your computer before the GSnap plugin is downloaded. Plus, the plugin will be downloaded in a zipped file. So, make sure you have an application installed on your device to unzip the downloaded file.

Step 2: Copy GSnap

Navigate to the download folder and right-click on the zipped GSnap option. Select extract here from the menu and copy the file named GSnap.dll.

Step 3: Paste the copied file

Navigate the plugins folder of Audacity and paste the copied file into the folder.

Step 3: Add plugin

Open Audacity and locate the Effects tab on a recording window. Select add/remove plug-ins, click on the GSnap option, and press enable button.

Note: The GSnap plugin will appear in the list under the effects tab and let you autotune your voice recording. You need to configure settings in a GSnap to get the fine-tuned voice.

For the detailed information, you can check the tutorial about how to add and set up GSnap plugin in Audacity.

Conclusion

Human voices and inputs from musical instruments are not perfect by default. Voice recordings in Audacity are no exception. They also need to be processed to enhance the vocal presentation. So, you need to tune the vocals in one way or another. This article mentions free Audacity autotune tools like GSnap to produce better sounds.

02 Top 3 Best Free Autotune Plugins for Audacity

03 How to AutoTune Your Voice for Free with GSnap on Audacity?

Part 1: What is Auto Tune and How Does It Work?

Autotune is a tool that enables you to adjust the pitch of the audio song or recording. It was launched in 1997. The plugin enjoys a trademark from Antares Audio Technologies. It automatically corrects the out-of-tune vocals in your recording.So, if you are struggling with tuning issues after recording a song in software like Audacity, this Audacity autotune tool can help.

Using autotune plugins is one of the best options to autotune songs in Audacity. They are becoming increasingly popular among singers, music producers, and others. Do you want to know why audio recordings need to be tuned and how they are adjusted using autotune? Here’s the answer.

There are high chances of multiple frequencies becoming intertwined when recording audio. Autotune detects the frequencies that are intertwined and splits them into single frequencies. So, the over-tuned vocals are isolated. In brief, autotune is the process of correcting vocal pitch. There are several plugins that can help you deal with tuning issues on piano, guitar, and other musical instruments.

Part 2: Top 3 Best Free Autotune Plugins for Audacity

Audacity comes with built-in audio recording and editing tools. It also allows you to mix different audios. Plus, you can also cut, split, and splice audio files in this amazing software. However, if you are recording a song in Audacity, it won’t be autotuned. Moreover, you cannot auto-correct the song’s pitch by default. So, you need to install autotune plugins for Audacity recording to enhance your vocal performance.

There are a number of plugins that enable you to fine-tune audios in Audacity. If you are interested in mastering the art of autotune using plugins, we have handpicked the following three best free autotune plugins for Audacity. Let’s get into them one by one.

1. GSnap

GSnap is a free audacity autotune plugin offered by GVST. It enables users to fine-tune the vocalist’s pitch, which is also a very easy and quick process. So, you can refine out-of-tune audio using GSnap. The correction mechanism is simple. First, it identifies over-tuned frequencies and then corrects them. Do you want to know more about GSnap and its advantages? If yes, we have summarized all its features in the list below.

Advantages

• GSnap enables you to configure both high and low frequency to offer the best pitch-correction mechanism.
• Background noise can be filtered out by configuring decibel settings.
• Allows controlling the parameters of a vocal performance through Musical Instrument Digital Interface (MIDI).
• GSnap lets you control the pace.
• Enables calibrating tune
• Free and easily accessible
• Available for Windows operating systems
• Maximum pitch bend can be set
• Customizable speed parameters
• Tune calibration

2. MAutoPitch

MAutoPitch provides automatic tuning for audio recording. This plugin comes with a simple yet intuitive interface to facilitate users. It supports pitch correction for all mainstream musical instruments and vocals. In addition to autotuning, MAuto Pitch is also known for offering creativity in your audio recordings. Stereo expansion is one of the creative features provided in this plugin. Furthermore, it also incorporates formant shift.

It applies the channel separation technique to tune the vocals. Moreover, it incorporates a MIDI controller that enables you to control parameters in real-time audio recording. MAutoPitch offers the following benefits to the users.

Advantages

• Offers safety brick wall limiters to limit audio output to a standardized threshold.
• Utilizes efficient and robust algorithms to cope up with fast computers.
• Advanced GUI to maximize flexibility.
• It includes automatic gain compensation to align input loudness with output loudness.
• Compatible with both Windows and Mac
• Easily accessible without internet
• Free updates
• Unique visualization engine

3. Graillon

Graillon is an auto-tuner with the capacity to take your vocal performance to the next level. It comes with unique features, such as pitch-tracking modulation. This can help you change the input voice. Moreover, it also enables users to create choruses. In short, it makes the voice recording pure. In addition to pitch correction, Graillon also performs the pitch-shifting function. So, it’s an ideal solution for people looking for autotuning tools. Here is a brief overview of the pros of Graillon.

Advantages

• Incorporates 23ms of latency
• Maximizes the sound quality of output
• Optimized pitch shifter
• Ability to produce robotic sounds
• Free access to the tool
• Allows altering the vocal pitch
• Compatibility with all mainstream operating systems including Windows, Mac, Linux, and others
• Simple interface
• Equipped with bit crusher
• A full edition version is also available, which provides state-of-the-art features

Part 3: How to AutoTune Your Voice for Free with GSnap on Audacity?

GSnap is a famous plugin for autotuning audio recordings in Audacity. This plugin is free and can be easily installed on Windows, Mac, and Linux operating systems. If you are wondering how to install and use this plugin to autotune your voice in Audacity, the step-by-step guide highlights the process below.

Step 1: Install GSnap

Access the web link https://www.gvst.co.uk/gsnap.htm and click on download GSnap. Choose the GSnap version that matches your operating system.

Note: Audacity must be installed on your computer before the GSnap plugin is downloaded. Plus, the plugin will be downloaded in a zipped file. So, make sure you have an application installed on your device to unzip the downloaded file.

Step 2: Copy GSnap

Navigate to the download folder and right-click on the zipped GSnap option. Select extract here from the menu and copy the file named GSnap.dll.

Step 3: Paste the copied file

Navigate the plugins folder of Audacity and paste the copied file into the folder.

Step 3: Add plugin

Open Audacity and locate the Effects tab on a recording window. Select add/remove plug-ins, click on the GSnap option, and press enable button.

Note: The GSnap plugin will appear in the list under the effects tab and let you autotune your voice recording. You need to configure settings in a GSnap to get the fine-tuned voice.

For the detailed information, you can check the tutorial about how to add and set up GSnap plugin in Audacity.

Conclusion

Human voices and inputs from musical instruments are not perfect by default. Voice recordings in Audacity are no exception. They also need to be processed to enhance the vocal presentation. So, you need to tune the vocals in one way or another. This article mentions free Audacity autotune tools like GSnap to produce better sounds.

“3 Budget-Friendly Ways to Seamlessly Add Soundtracks to Your Videos”

The audio or music of video can dramatically affect our perception of a video – no matter whether it’s a home movie, a commercial, or a video presentation. But what if all you have is silent footage or with just a crackled and distorted audio file that needs to be replaced, and at this time, you want to add a sound to the video?

To solve this problem, I humbly recommend Wondershare Filmora . With it, you can easily add audio to video, record the voiceover directly and add it to video, or replace the original audio track (stream) with a new audio file.

In case you want to add music to video with some online tools, please leave a comment below so I can test some online solutions and share with you the best online tools to add audio to video free. I recommend Filmora because its requirement on the network isn’t so high compared to the online tools.

Below is a creative way of adding sound effects to video.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• User-friendly interface enables you to edit your videos easily;
• Supports almost any video and audio formats (including WMV,MOV,FLV,MTS,etc);
• Convenient to add audio to video without quality loss;
• Adding audio to video is so easy
• Supported OS: Windows (Windows 10 included) & Mac OS X (above 10.6).

You May also like 15 Free Music Sites for Commercial Use >>

How to Add Audio to Video Easily

Now see the easy steps to add audio to video files or replace the original audio track with a new voiceover or music.

Step 1: Add audio and video files to the program

After downloading and installing Wondershare Filmora, you can either click Import on the primary windows and select audio and video files from your computer or simply drag and drop audio and video files to the project media library. Filmora also features a free Audio Library, which provides different genres of music and sound effects.

You can preview it and add the proper audio to your video.

You may also like: 10 Best Free Audio Editor for Windows and Mac

Step 2: Add a new audio file to the video

Drag the audio and video files from the media library or Audio Library and place them on the respective tracks of the timeline, namely, place the audio file to the Audio Track. This way, the audio file(s) will be merged into the video.

Step 3: Record and add your voiceover to video

Instead of adding music to the video , you can also record and add voiceover to the video. It’s a fun way to add narration or complementary audio to video. To do so, click the Record button on the toolbar above timeline, the Record dialog will appear.

Click the red Record button, and you can start to talk in 3 seconds. The voiceover will be added to the User’s Album and timeline when completed.

Step 4: Replace audio track of the video

This is similar to adding audio to video. Just an extra step is required: delete the original audio file. To do so, right-click the video you want to replace audio in it, and select Audio Detach . After that, delete the audio file from the track.

As described above, you can then drag and drop a new audio file from User’s Album to the Audio track.

You can click to see more details about How to Replace Audio in Video >>

Step 5: Adjust the audio file and be creative

Various audio editing tools are available: set volume, speed up, slow down, change pitch and add fade in/out effect. Double-click the audio file on the timeline to change the settings and drag the slide bar.

Hit “Return” to confirm the settings and go back to the main interface.

You can also change your voice by adjusting the pitch or speed of the audio file, check the detailed guide about How to change voice with Filmora Voice Changer

Step 6: Export video with new audio track

Click “Create” and select “Format” when all is ready. From the list, choose any format you want as the output format. If necessary, also change the advanced settings. Finally, click the “Create” button to export a new video file to the specified folder on the computer.

Besides export video to your computer, you can also create video for devices like the iPhone, iPad, iPod, directly upload video to YouTube, or burn it to DVD for playing on TV. All in one video editor, no extra software required.

Conclusion

Above are the steps about how to add audio to video with Filmora video editor on Windows and Mac. Typically, you can add your voiceover to the video or detach the original audio and replace it with your voiceover or music file. Whichever you choose, you can adjust the audio settings to get a better result.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• User-friendly interface enables you to edit your videos easily;
• Supports almost any video and audio formats (including WMV,MOV,FLV,MTS,etc);
• Convenient to add audio to video without quality loss;
• Adding audio to video is so easy
• Supported OS: Windows (Windows 10 included) & Mac OS X (above 10.6).

You May also like 15 Free Music Sites for Commercial Use >>

How to Add Audio to Video Easily

Now see the easy steps to add audio to video files or replace the original audio track with a new voiceover or music.

Step 1: Add audio and video files to the program

After downloading and installing Wondershare Filmora, you can either click Import on the primary windows and select audio and video files from your computer or simply drag and drop audio and video files to the project media library. Filmora also features a free Audio Library, which provides different genres of music and sound effects.

You can preview it and add the proper audio to your video.

You may also like: 10 Best Free Audio Editor for Windows and Mac

Step 2: Add a new audio file to the video

Drag the audio and video files from the media library or Audio Library and place them on the respective tracks of the timeline, namely, place the audio file to the Audio Track. This way, the audio file(s) will be merged into the video.

Step 3: Record and add your voiceover to video

Instead of adding music to the video , you can also record and add voiceover to the video. It’s a fun way to add narration or complementary audio to video. To do so, click the Record button on the toolbar above timeline, the Record dialog will appear.

Click the red Record button, and you can start to talk in 3 seconds. The voiceover will be added to the User’s Album and timeline when completed.

Step 4: Replace audio track of the video

This is similar to adding audio to video. Just an extra step is required: delete the original audio file. To do so, right-click the video you want to replace audio in it, and select Audio Detach . After that, delete the audio file from the track.

As described above, you can then drag and drop a new audio file from User’s Album to the Audio track.

You can click to see more details about How to Replace Audio in Video >>

Step 5: Adjust the audio file and be creative

Various audio editing tools are available: set volume, speed up, slow down, change pitch and add fade in/out effect. Double-click the audio file on the timeline to change the settings and drag the slide bar.

Hit “Return” to confirm the settings and go back to the main interface.

You can also change your voice by adjusting the pitch or speed of the audio file, check the detailed guide about How to change voice with Filmora Voice Changer

Step 6: Export video with new audio track

Click “Create” and select “Format” when all is ready. From the list, choose any format you want as the output format. If necessary, also change the advanced settings. Finally, click the “Create” button to export a new video file to the specified folder on the computer.

Besides export video to your computer, you can also create video for devices like the iPhone, iPad, iPod, directly upload video to YouTube, or burn it to DVD for playing on TV. All in one video editor, no extra software required.

Conclusion

Above are the steps about how to add audio to video with Filmora video editor on Windows and Mac. Typically, you can add your voiceover to the video or detach the original audio and replace it with your voiceover or music file. Whichever you choose, you can adjust the audio settings to get a better result.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• User-friendly interface enables you to edit your videos easily;
• Supports almost any video and audio formats (including WMV,MOV,FLV,MTS,etc);
• Convenient to add audio to video without quality loss;
• Adding audio to video is so easy
• Supported OS: Windows (Windows 10 included) & Mac OS X (above 10.6).

You May also like 15 Free Music Sites for Commercial Use >>

How to Add Audio to Video Easily

Now see the easy steps to add audio to video files or replace the original audio track with a new voiceover or music.

Step 1: Add audio and video files to the program

After downloading and installing Wondershare Filmora, you can either click Import on the primary windows and select audio and video files from your computer or simply drag and drop audio and video files to the project media library. Filmora also features a free Audio Library, which provides different genres of music and sound effects.

You can preview it and add the proper audio to your video.

You may also like: 10 Best Free Audio Editor for Windows and Mac

Step 2: Add a new audio file to the video

Drag the audio and video files from the media library or Audio Library and place them on the respective tracks of the timeline, namely, place the audio file to the Audio Track. This way, the audio file(s) will be merged into the video.

Step 3: Record and add your voiceover to video

Instead of adding music to the video , you can also record and add voiceover to the video. It’s a fun way to add narration or complementary audio to video. To do so, click the Record button on the toolbar above timeline, the Record dialog will appear.

Click the red Record button, and you can start to talk in 3 seconds. The voiceover will be added to the User’s Album and timeline when completed.

Step 4: Replace audio track of the video

This is similar to adding audio to video. Just an extra step is required: delete the original audio file. To do so, right-click the video you want to replace audio in it, and select Audio Detach . After that, delete the audio file from the track.

As described above, you can then drag and drop a new audio file from User’s Album to the Audio track.

You can click to see more details about How to Replace Audio in Video >>

Step 5: Adjust the audio file and be creative

Various audio editing tools are available: set volume, speed up, slow down, change pitch and add fade in/out effect. Double-click the audio file on the timeline to change the settings and drag the slide bar.

Hit “Return” to confirm the settings and go back to the main interface.

You can also change your voice by adjusting the pitch or speed of the audio file, check the detailed guide about How to change voice with Filmora Voice Changer

Step 6: Export video with new audio track

Click “Create” and select “Format” when all is ready. From the list, choose any format you want as the output format. If necessary, also change the advanced settings. Finally, click the “Create” button to export a new video file to the specified folder on the computer.

Besides export video to your computer, you can also create video for devices like the iPhone, iPad, iPod, directly upload video to YouTube, or burn it to DVD for playing on TV. All in one video editor, no extra software required.

Conclusion

Above are the steps about how to add audio to video with Filmora video editor on Windows and Mac. Typically, you can add your voiceover to the video or detach the original audio and replace it with your voiceover or music file. Whichever you choose, you can adjust the audio settings to get a better result.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

• User-friendly interface enables you to edit your videos easily;
• Supports almost any video and audio formats (including WMV,MOV,FLV,MTS,etc);
• Convenient to add audio to video without quality loss;
• Adding audio to video is so easy
• Supported OS: Windows (Windows 10 included) & Mac OS X (above 10.6).

You May also like 15 Free Music Sites for Commercial Use >>

How to Add Audio to Video Easily

Now see the easy steps to add audio to video files or replace the original audio track with a new voiceover or music.

Step 1: Add audio and video files to the program

After downloading and installing Wondershare Filmora, you can either click Import on the primary windows and select audio and video files from your computer or simply drag and drop audio and video files to the project media library. Filmora also features a free Audio Library, which provides different genres of music and sound effects.

You can preview it and add the proper audio to your video.

You may also like: 10 Best Free Audio Editor for Windows and Mac

Step 2: Add a new audio file to the video

Drag the audio and video files from the media library or Audio Library and place them on the respective tracks of the timeline, namely, place the audio file to the Audio Track. This way, the audio file(s) will be merged into the video.

Step 3: Record and add your voiceover to video

Instead of adding music to the video , you can also record and add voiceover to the video. It’s a fun way to add narration or complementary audio to video. To do so, click the Record button on the toolbar above timeline, the Record dialog will appear.

Click the red Record button, and you can start to talk in 3 seconds. The voiceover will be added to the User’s Album and timeline when completed.

Step 4: Replace audio track of the video

This is similar to adding audio to video. Just an extra step is required: delete the original audio file. To do so, right-click the video you want to replace audio in it, and select Audio Detach . After that, delete the audio file from the track.

As described above, you can then drag and drop a new audio file from User’s Album to the Audio track.

You can click to see more details about How to Replace Audio in Video >>

Step 5: Adjust the audio file and be creative

Various audio editing tools are available: set volume, speed up, slow down, change pitch and add fade in/out effect. Double-click the audio file on the timeline to change the settings and drag the slide bar.

Hit “Return” to confirm the settings and go back to the main interface.

You can also change your voice by adjusting the pitch or speed of the audio file, check the detailed guide about How to change voice with Filmora Voice Changer

Step 6: Export video with new audio track

Click “Create” and select “Format” when all is ready. From the list, choose any format you want as the output format. If necessary, also change the advanced settings. Finally, click the “Create” button to export a new video file to the specified folder on the computer.

Besides export video to your computer, you can also create video for devices like the iPhone, iPad, iPod, directly upload video to YouTube, or burn it to DVD for playing on TV. All in one video editor, no extra software required.

Conclusion

Above are the steps about how to add audio to video with Filmora video editor on Windows and Mac. Typically, you can add your voiceover to the video or detach the original audio and replace it with your voiceover or music file. Whichever you choose, you can adjust the audio settings to get a better result.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Also read: