How Can You Change Your Voice on Audacity Easily?

What does free open source audio software mean? Audacity voice changer is the answer. Along with being free, it is a cross-platform software, which means that it can be used with different software packages. Audacity is easy to use multi-track audio editing and recording software.

It has a simple and clean-looking interface for better user understandability. Audacity has plug-in support for multiple audio formats like LV2, AU, and VST. We will further discuss Audacity as an audio voice changer, and how to use the software under various conditions will also be discussed in the article.

In this article

01 How Can You Use Voice Changer in Audacity?

02 How to Change Pitch in Audacity?

03 How to Change Male Voice to Female Voice with Audacity?

04 How to Create Robot Voice in Audacity?

Part 1. How Can You Use Voice Changer in Audacity?

Voice changers are also commonly referred to as voice enhancers, which can completely change and transform your voice. You can pull pranks on friends with voice changers if you are bored. If you want to hide your identity, you can modify your voice and do that. With voice changers, you can change the tone and the pitch of your voice and add various voice effects.

Voice changer comes with a wide range of sound effects ranging from baby sound, kid, male, female, monster, demon, animal sounds, and a lot more than this. Some great voice changers include AV Voice Changer , MorphVOX Voice Changer , Voicemod , Clownfish Voice Changer , and others. Do you know that these voice changers can be used with Audacity? Let’s tell you how.

Step 1: If you are interested in using a voice changer in Audacity, start by downloading your favorite voice changer to your PC. Once done, install it and after successful installation, launch it.

Step 2: As we have mentioned earlier that you are offered various voice effects in voice changers, so after launching it, select your preferred voice effect, whether it be a baby voice, animal voice, or celebrity voice.

Step 3: On the other side, launch Audacity on your PC. Once it opens, you will see the top menu; just below that, a microphone icon will be seen. Tap on that icon so that the drop-down menu appears, there select the name of your voice changer.

Part 2. How to Change Pitch in Audacity?

Audacity, the audio voice changer, offers a ‘Change Pitch’ feature with which you can change the pitch of the audio without damaging its tempo. You can separately change the speed. With this feature, you can also adjust and play with the frequency and semitones.

The audio editor also features to estimate the starting pitch; for instance, if A3 is a quiet note, followed by a large and loud note like C4, Audacity will detect C4. In case both notes have the same volume, Audacity will detect A3. With Audacity, you also get the ‘To’ and ‘From’ controls if you plan to change the pitch manually. To learn more about changing pitch, follow the steps below:

Step 1: For changing pitch in Audacity, start by launching the software. After launching, you can either record the audio or else, from the ‘File’ section, you can also ‘Open’ any file from your device.

Step 2: Audacity lets you change the pitch of a whole file or else for a small portion as well. Now, to change the pitch of a small portion, click and drag the mouse along the recording. Or else, click on the name of the track to select it completely.

Step 3: After this, head over to the top menu and click on the ‘Effect’ section. A drop-down menu list will appear, locate and select the ‘Change Pitch’ option. You can either use the sliders to adjust the pitch or else write the percentage to change.

Step 4: You can preview the file and check how it sounds once done. When you are satisfied, hit the ‘OK’ button to save the changes. You can also adjust the Speed and Tempo of the track.

Part 3. How to Change Male Voice to Female Voice with Audacity?

The most fun voice transformation is from low pitch to higher pitch. In general, modifying the male voice to a female voice, as the male pitch has a negative value and changing it to a positive pitch, modifies your voice to a female voice. What else could be better to use than the amazing Audacity voice changer? Let’s share the steps that will help you change your male voice to female.

Step 1: First, start by opening the Audacity audio editor. Once it has launched successfully, you should import the audio file. You can record audio with Audacity. Along with this, you can also import files from your device from the ‘File’ section, followed by the ‘Open’ option.

Step 2: After your audio track is visible on the timeline, you have to select the part of the file that you want to edit. You can easily select it by clicking and dragging the mouse. If not this, you can also work with the whole track; for this, simply click on the track name to select it.

Step 3: After you are satisfied with the selection, head to the top menu and select the ‘Effects’ options. A drop-down list appears after this, and you have to look for the ‘Change Pitch’ option and select it.

Step 4: Normally, you can adjust the pitch by taking help from the sliders, but you can also change the pitch manually by adding a percentage. The male pitch originally will have a negative value; change it and set a positive value. You can keep changing until you are satisfied.

Step 5: Lastly, don’t forget to save the changes by hitting the ‘OK’ button at the button and saving the file to your respective device.

Part 4. How to Create Robot Voice in Audacity?

As we have mentioned, Audacity is an audio voice changer, so you must know that Audacity also can change your voice into a robotic voice. Among the different voices, the robot voice sounds interesting, and it’s fun to create. If you are excited to learn to create robot voice in Audacity, follow the guiding steps shared below:

Step 1: For creating an extraordinary robotic voice, start by launching Audacity on your device. After it opens, it’s time to record your voice to create a robot voice. Or else, head to the ‘File’ tab and import your audio file from your device to Audacity from the ‘Open’ option.

Step 2: After this, to start the editing, you need a stereo track on the timeline. For doing this, navigate ‘Tracks’ from the top menu and click on it. Next, hover on the ‘Add New’ option to open its sub-menu. You will see the ‘Stereo Track’ option, select it, and copy-paste the audio file in the new section.

Step 3: Let’s start with the fun part, the editing and adjusting different features. Start by opening the ‘Effects’ tab, and from the long list of options, select ‘Echo.’ There, you can enter the ‘Delay Time’ and change other fields as well.

Step 4: Preview the audio and move on to the next setting. Open the ‘Effects’ section and look for the ‘Change Pitch’ option. You can change and adjust the pitch according to your desire and preview the file again.

Step 5: For creating a robot voice, you can also set the tempo. For that, head to the ‘Change Tempo’ option under the ‘Effects’ section and set the value to minus. Keep adjusting the different effects until you get your perfect robot voice.

Bottom Line

Audacity is not only a great audio editor; it is also a stunning audio voice changer. The software comes with a lot of effects that can completely transform your voice to an unrecognizable level. You can sound like a robot, male, female, and whatever you want with Audacity voice changer. Do you know any video editor that offers sound effects?

If you don’t know, let us introduce Wondershare Filmora Video Editor . This wonderous software is loaded with many editing features to create the best videos. Not only trim, cut, crop, but the software also offers you features like split-screen, chroma key background, keyframing, color match, motion tracking, and whatnot.

Apart from this, this video editor is a hub for cool sound effects and editing elements from its media library, Filmstock. You get a wide range of sound effects, titles, transitions, and many more elements.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 How to Change Pitch in Audacity?

03 How to Change Male Voice to Female Voice with Audacity?

04 How to Create Robot Voice in Audacity?

Part 1. How Can You Use Voice Changer in Audacity?

Voice changers are also commonly referred to as voice enhancers, which can completely change and transform your voice. You can pull pranks on friends with voice changers if you are bored. If you want to hide your identity, you can modify your voice and do that. With voice changers, you can change the tone and the pitch of your voice and add various voice effects.

Voice changer comes with a wide range of sound effects ranging from baby sound, kid, male, female, monster, demon, animal sounds, and a lot more than this. Some great voice changers include AV Voice Changer , MorphVOX Voice Changer , Voicemod , Clownfish Voice Changer , and others. Do you know that these voice changers can be used with Audacity? Let’s tell you how.

Step 1: If you are interested in using a voice changer in Audacity, start by downloading your favorite voice changer to your PC. Once done, install it and after successful installation, launch it.

Step 2: As we have mentioned earlier that you are offered various voice effects in voice changers, so after launching it, select your preferred voice effect, whether it be a baby voice, animal voice, or celebrity voice.

Step 3: On the other side, launch Audacity on your PC. Once it opens, you will see the top menu; just below that, a microphone icon will be seen. Tap on that icon so that the drop-down menu appears, there select the name of your voice changer.

Part 2. How to Change Pitch in Audacity?

Audacity, the audio voice changer, offers a ‘Change Pitch’ feature with which you can change the pitch of the audio without damaging its tempo. You can separately change the speed. With this feature, you can also adjust and play with the frequency and semitones.

The audio editor also features to estimate the starting pitch; for instance, if A3 is a quiet note, followed by a large and loud note like C4, Audacity will detect C4. In case both notes have the same volume, Audacity will detect A3. With Audacity, you also get the ‘To’ and ‘From’ controls if you plan to change the pitch manually. To learn more about changing pitch, follow the steps below:

Step 1: For changing pitch in Audacity, start by launching the software. After launching, you can either record the audio or else, from the ‘File’ section, you can also ‘Open’ any file from your device.

Step 2: Audacity lets you change the pitch of a whole file or else for a small portion as well. Now, to change the pitch of a small portion, click and drag the mouse along the recording. Or else, click on the name of the track to select it completely.

Step 3: After this, head over to the top menu and click on the ‘Effect’ section. A drop-down menu list will appear, locate and select the ‘Change Pitch’ option. You can either use the sliders to adjust the pitch or else write the percentage to change.

Step 4: You can preview the file and check how it sounds once done. When you are satisfied, hit the ‘OK’ button to save the changes. You can also adjust the Speed and Tempo of the track.

Part 3. How to Change Male Voice to Female Voice with Audacity?

The most fun voice transformation is from low pitch to higher pitch. In general, modifying the male voice to a female voice, as the male pitch has a negative value and changing it to a positive pitch, modifies your voice to a female voice. What else could be better to use than the amazing Audacity voice changer? Let’s share the steps that will help you change your male voice to female.

Step 1: First, start by opening the Audacity audio editor. Once it has launched successfully, you should import the audio file. You can record audio with Audacity. Along with this, you can also import files from your device from the ‘File’ section, followed by the ‘Open’ option.

Step 2: After your audio track is visible on the timeline, you have to select the part of the file that you want to edit. You can easily select it by clicking and dragging the mouse. If not this, you can also work with the whole track; for this, simply click on the track name to select it.

Step 3: After you are satisfied with the selection, head to the top menu and select the ‘Effects’ options. A drop-down list appears after this, and you have to look for the ‘Change Pitch’ option and select it.

Step 4: Normally, you can adjust the pitch by taking help from the sliders, but you can also change the pitch manually by adding a percentage. The male pitch originally will have a negative value; change it and set a positive value. You can keep changing until you are satisfied.

Step 5: Lastly, don’t forget to save the changes by hitting the ‘OK’ button at the button and saving the file to your respective device.

Part 4. How to Create Robot Voice in Audacity?

As we have mentioned, Audacity is an audio voice changer, so you must know that Audacity also can change your voice into a robotic voice. Among the different voices, the robot voice sounds interesting, and it’s fun to create. If you are excited to learn to create robot voice in Audacity, follow the guiding steps shared below:

Step 1: For creating an extraordinary robotic voice, start by launching Audacity on your device. After it opens, it’s time to record your voice to create a robot voice. Or else, head to the ‘File’ tab and import your audio file from your device to Audacity from the ‘Open’ option.

Step 2: After this, to start the editing, you need a stereo track on the timeline. For doing this, navigate ‘Tracks’ from the top menu and click on it. Next, hover on the ‘Add New’ option to open its sub-menu. You will see the ‘Stereo Track’ option, select it, and copy-paste the audio file in the new section.

Step 3: Let’s start with the fun part, the editing and adjusting different features. Start by opening the ‘Effects’ tab, and from the long list of options, select ‘Echo.’ There, you can enter the ‘Delay Time’ and change other fields as well.

Step 4: Preview the audio and move on to the next setting. Open the ‘Effects’ section and look for the ‘Change Pitch’ option. You can change and adjust the pitch according to your desire and preview the file again.

Step 5: For creating a robot voice, you can also set the tempo. For that, head to the ‘Change Tempo’ option under the ‘Effects’ section and set the value to minus. Keep adjusting the different effects until you get your perfect robot voice.

Bottom Line

Audacity is not only a great audio editor; it is also a stunning audio voice changer. The software comes with a lot of effects that can completely transform your voice to an unrecognizable level. You can sound like a robot, male, female, and whatever you want with Audacity voice changer. Do you know any video editor that offers sound effects?

If you don’t know, let us introduce Wondershare Filmora Video Editor . This wonderous software is loaded with many editing features to create the best videos. Not only trim, cut, crop, but the software also offers you features like split-screen, chroma key background, keyframing, color match, motion tracking, and whatnot.

Apart from this, this video editor is a hub for cool sound effects and editing elements from its media library, Filmstock. You get a wide range of sound effects, titles, transitions, and many more elements.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 How to Change Pitch in Audacity?

03 How to Change Male Voice to Female Voice with Audacity?

04 How to Create Robot Voice in Audacity?

Part 1. How Can You Use Voice Changer in Audacity?

Voice changers are also commonly referred to as voice enhancers, which can completely change and transform your voice. You can pull pranks on friends with voice changers if you are bored. If you want to hide your identity, you can modify your voice and do that. With voice changers, you can change the tone and the pitch of your voice and add various voice effects.

Voice changer comes with a wide range of sound effects ranging from baby sound, kid, male, female, monster, demon, animal sounds, and a lot more than this. Some great voice changers include AV Voice Changer , MorphVOX Voice Changer , Voicemod , Clownfish Voice Changer , and others. Do you know that these voice changers can be used with Audacity? Let’s tell you how.

Step 1: If you are interested in using a voice changer in Audacity, start by downloading your favorite voice changer to your PC. Once done, install it and after successful installation, launch it.

Step 2: As we have mentioned earlier that you are offered various voice effects in voice changers, so after launching it, select your preferred voice effect, whether it be a baby voice, animal voice, or celebrity voice.

Step 3: On the other side, launch Audacity on your PC. Once it opens, you will see the top menu; just below that, a microphone icon will be seen. Tap on that icon so that the drop-down menu appears, there select the name of your voice changer.

Part 2. How to Change Pitch in Audacity?

Audacity, the audio voice changer, offers a ‘Change Pitch’ feature with which you can change the pitch of the audio without damaging its tempo. You can separately change the speed. With this feature, you can also adjust and play with the frequency and semitones.

The audio editor also features to estimate the starting pitch; for instance, if A3 is a quiet note, followed by a large and loud note like C4, Audacity will detect C4. In case both notes have the same volume, Audacity will detect A3. With Audacity, you also get the ‘To’ and ‘From’ controls if you plan to change the pitch manually. To learn more about changing pitch, follow the steps below:

Step 1: For changing pitch in Audacity, start by launching the software. After launching, you can either record the audio or else, from the ‘File’ section, you can also ‘Open’ any file from your device.

Step 2: Audacity lets you change the pitch of a whole file or else for a small portion as well. Now, to change the pitch of a small portion, click and drag the mouse along the recording. Or else, click on the name of the track to select it completely.

Step 3: After this, head over to the top menu and click on the ‘Effect’ section. A drop-down menu list will appear, locate and select the ‘Change Pitch’ option. You can either use the sliders to adjust the pitch or else write the percentage to change.

Step 4: You can preview the file and check how it sounds once done. When you are satisfied, hit the ‘OK’ button to save the changes. You can also adjust the Speed and Tempo of the track.

Part 3. How to Change Male Voice to Female Voice with Audacity?

The most fun voice transformation is from low pitch to higher pitch. In general, modifying the male voice to a female voice, as the male pitch has a negative value and changing it to a positive pitch, modifies your voice to a female voice. What else could be better to use than the amazing Audacity voice changer? Let’s share the steps that will help you change your male voice to female.

Step 1: First, start by opening the Audacity audio editor. Once it has launched successfully, you should import the audio file. You can record audio with Audacity. Along with this, you can also import files from your device from the ‘File’ section, followed by the ‘Open’ option.

Step 2: After your audio track is visible on the timeline, you have to select the part of the file that you want to edit. You can easily select it by clicking and dragging the mouse. If not this, you can also work with the whole track; for this, simply click on the track name to select it.

Step 3: After you are satisfied with the selection, head to the top menu and select the ‘Effects’ options. A drop-down list appears after this, and you have to look for the ‘Change Pitch’ option and select it.

Step 4: Normally, you can adjust the pitch by taking help from the sliders, but you can also change the pitch manually by adding a percentage. The male pitch originally will have a negative value; change it and set a positive value. You can keep changing until you are satisfied.

Step 5: Lastly, don’t forget to save the changes by hitting the ‘OK’ button at the button and saving the file to your respective device.

Part 4. How to Create Robot Voice in Audacity?

As we have mentioned, Audacity is an audio voice changer, so you must know that Audacity also can change your voice into a robotic voice. Among the different voices, the robot voice sounds interesting, and it’s fun to create. If you are excited to learn to create robot voice in Audacity, follow the guiding steps shared below:

Step 1: For creating an extraordinary robotic voice, start by launching Audacity on your device. After it opens, it’s time to record your voice to create a robot voice. Or else, head to the ‘File’ tab and import your audio file from your device to Audacity from the ‘Open’ option.

Step 2: After this, to start the editing, you need a stereo track on the timeline. For doing this, navigate ‘Tracks’ from the top menu and click on it. Next, hover on the ‘Add New’ option to open its sub-menu. You will see the ‘Stereo Track’ option, select it, and copy-paste the audio file in the new section.

Step 3: Let’s start with the fun part, the editing and adjusting different features. Start by opening the ‘Effects’ tab, and from the long list of options, select ‘Echo.’ There, you can enter the ‘Delay Time’ and change other fields as well.

Step 4: Preview the audio and move on to the next setting. Open the ‘Effects’ section and look for the ‘Change Pitch’ option. You can change and adjust the pitch according to your desire and preview the file again.

Step 5: For creating a robot voice, you can also set the tempo. For that, head to the ‘Change Tempo’ option under the ‘Effects’ section and set the value to minus. Keep adjusting the different effects until you get your perfect robot voice.

Bottom Line

Audacity is not only a great audio editor; it is also a stunning audio voice changer. The software comes with a lot of effects that can completely transform your voice to an unrecognizable level. You can sound like a robot, male, female, and whatever you want with Audacity voice changer. Do you know any video editor that offers sound effects?

If you don’t know, let us introduce Wondershare Filmora Video Editor . This wonderous software is loaded with many editing features to create the best videos. Not only trim, cut, crop, but the software also offers you features like split-screen, chroma key background, keyframing, color match, motion tracking, and whatnot.

Apart from this, this video editor is a hub for cool sound effects and editing elements from its media library, Filmstock. You get a wide range of sound effects, titles, transitions, and many more elements.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

02 How to Change Pitch in Audacity?

03 How to Change Male Voice to Female Voice with Audacity?

04 How to Create Robot Voice in Audacity?

Part 1. How Can You Use Voice Changer in Audacity?

Voice changers are also commonly referred to as voice enhancers, which can completely change and transform your voice. You can pull pranks on friends with voice changers if you are bored. If you want to hide your identity, you can modify your voice and do that. With voice changers, you can change the tone and the pitch of your voice and add various voice effects.

Voice changer comes with a wide range of sound effects ranging from baby sound, kid, male, female, monster, demon, animal sounds, and a lot more than this. Some great voice changers include AV Voice Changer , MorphVOX Voice Changer , Voicemod , Clownfish Voice Changer , and others. Do you know that these voice changers can be used with Audacity? Let’s tell you how.

Step 1: If you are interested in using a voice changer in Audacity, start by downloading your favorite voice changer to your PC. Once done, install it and after successful installation, launch it.

Step 2: As we have mentioned earlier that you are offered various voice effects in voice changers, so after launching it, select your preferred voice effect, whether it be a baby voice, animal voice, or celebrity voice.

Step 3: On the other side, launch Audacity on your PC. Once it opens, you will see the top menu; just below that, a microphone icon will be seen. Tap on that icon so that the drop-down menu appears, there select the name of your voice changer.

Part 2. How to Change Pitch in Audacity?

Audacity, the audio voice changer, offers a ‘Change Pitch’ feature with which you can change the pitch of the audio without damaging its tempo. You can separately change the speed. With this feature, you can also adjust and play with the frequency and semitones.

The audio editor also features to estimate the starting pitch; for instance, if A3 is a quiet note, followed by a large and loud note like C4, Audacity will detect C4. In case both notes have the same volume, Audacity will detect A3. With Audacity, you also get the ‘To’ and ‘From’ controls if you plan to change the pitch manually. To learn more about changing pitch, follow the steps below:

Step 1: For changing pitch in Audacity, start by launching the software. After launching, you can either record the audio or else, from the ‘File’ section, you can also ‘Open’ any file from your device.

Step 2: Audacity lets you change the pitch of a whole file or else for a small portion as well. Now, to change the pitch of a small portion, click and drag the mouse along the recording. Or else, click on the name of the track to select it completely.

Step 3: After this, head over to the top menu and click on the ‘Effect’ section. A drop-down menu list will appear, locate and select the ‘Change Pitch’ option. You can either use the sliders to adjust the pitch or else write the percentage to change.

Step 4: You can preview the file and check how it sounds once done. When you are satisfied, hit the ‘OK’ button to save the changes. You can also adjust the Speed and Tempo of the track.

Part 3. How to Change Male Voice to Female Voice with Audacity?

The most fun voice transformation is from low pitch to higher pitch. In general, modifying the male voice to a female voice, as the male pitch has a negative value and changing it to a positive pitch, modifies your voice to a female voice. What else could be better to use than the amazing Audacity voice changer? Let’s share the steps that will help you change your male voice to female.

Step 1: First, start by opening the Audacity audio editor. Once it has launched successfully, you should import the audio file. You can record audio with Audacity. Along with this, you can also import files from your device from the ‘File’ section, followed by the ‘Open’ option.

Step 2: After your audio track is visible on the timeline, you have to select the part of the file that you want to edit. You can easily select it by clicking and dragging the mouse. If not this, you can also work with the whole track; for this, simply click on the track name to select it.

Step 3: After you are satisfied with the selection, head to the top menu and select the ‘Effects’ options. A drop-down list appears after this, and you have to look for the ‘Change Pitch’ option and select it.

Step 4: Normally, you can adjust the pitch by taking help from the sliders, but you can also change the pitch manually by adding a percentage. The male pitch originally will have a negative value; change it and set a positive value. You can keep changing until you are satisfied.

Step 5: Lastly, don’t forget to save the changes by hitting the ‘OK’ button at the button and saving the file to your respective device.

Part 4. How to Create Robot Voice in Audacity?

As we have mentioned, Audacity is an audio voice changer, so you must know that Audacity also can change your voice into a robotic voice. Among the different voices, the robot voice sounds interesting, and it’s fun to create. If you are excited to learn to create robot voice in Audacity, follow the guiding steps shared below:

Step 1: For creating an extraordinary robotic voice, start by launching Audacity on your device. After it opens, it’s time to record your voice to create a robot voice. Or else, head to the ‘File’ tab and import your audio file from your device to Audacity from the ‘Open’ option.

Step 2: After this, to start the editing, you need a stereo track on the timeline. For doing this, navigate ‘Tracks’ from the top menu and click on it. Next, hover on the ‘Add New’ option to open its sub-menu. You will see the ‘Stereo Track’ option, select it, and copy-paste the audio file in the new section.

Step 3: Let’s start with the fun part, the editing and adjusting different features. Start by opening the ‘Effects’ tab, and from the long list of options, select ‘Echo.’ There, you can enter the ‘Delay Time’ and change other fields as well.

Step 4: Preview the audio and move on to the next setting. Open the ‘Effects’ section and look for the ‘Change Pitch’ option. You can change and adjust the pitch according to your desire and preview the file again.

Step 5: For creating a robot voice, you can also set the tempo. For that, head to the ‘Change Tempo’ option under the ‘Effects’ section and set the value to minus. Keep adjusting the different effects until you get your perfect robot voice.

Bottom Line

Audacity is not only a great audio editor; it is also a stunning audio voice changer. The software comes with a lot of effects that can completely transform your voice to an unrecognizable level. You can sound like a robot, male, female, and whatever you want with Audacity voice changer. Do you know any video editor that offers sound effects?

If you don’t know, let us introduce Wondershare Filmora Video Editor . This wonderous software is loaded with many editing features to create the best videos. Not only trim, cut, crop, but the software also offers you features like split-screen, chroma key background, keyframing, color match, motion tracking, and whatnot.

Apart from this, this video editor is a hub for cool sound effects and editing elements from its media library, Filmstock. You get a wide range of sound effects, titles, transitions, and many more elements.

Try It Free

For Win 7 or later (64-bit)

Try It Free

For macOS 10.12 or later

Auditory Augmentation of Photo Projects: A Comprehensive Guide

Almost everyone shoots videos and photos now. But sometimes, it’s hard to record videos while boring to capture images. What if a hybrid mingles still images with an audio file? You can add audio to photo easily.

Images with a soundtrack are simpler to create and more interactive than video; they naturally improve the project without time commitment or complexity. The question that appears is; how to add audio to a photo/image and create great multimedia photography?

In this post, we will describe and clear all your queries on how to add audio to photo. Whether you wish to combine audio and image on the computer or add audio to iPhone pictures, you can all find the answer.

In this article

01 [Can I add audio to the photo?](#Part 1)

02 [How to add audio to a photo?](#Part 2)

03 [Secret about adding audio to the photo?](#Part 3)

Part 1 Can I add audio to the photo?

Yes, it’s possible to add audio to photo, and we have various methods to do this. One of the simplest methods is arranging images into slideshows and adding audio.

Yes, there are different ways by which you can add audio to photo online or offline, including both the easiest and most brutal ways. Let’s list out some general courses as follows!

● The first and common way is by making a slideshow or photo collage like a video and adding background music as audio.

● You can use an image collage app or add audio to a photo app for Android or iPhone devices.

● Lastly, you can add audio to the photo online editor or online video editing program and include voiceover or background music.

All in all, it’s possible to add audio to photo provided you’ve to look straightforward and quick ways of doing so.

Part 2 How to add audio to a photo?

ACDSee supports images with embedded audio and photos with associated audio files. Images with embedded audio are JPEG or TIFF images saved inside the photo folder. You can embed audio inside the folder of photos by adding audio to the photo online.

Images with associated audio are photos are merged with individual WAV audio files. The photo folders and their associated audio files contain the same file name and are placed within the same folder.

You can associate any WAV file with a photo by assigning them the same name and locating them in the same folder or adding audio to the photo.

Note: If you rename or move either an audio file or an image file associated with it, you must rename both the folders or they will not associate for longer. It does not apply to photos with embedded audio.

Steps to add audio to photo via ACDSee

Do one of the following:

● Select an image in Manage mode.

● Open an image in View mode.

Step1 Click Tools | Image Audio | Edit

Step2 In the Edit Audio dialog box, click the Browse button

Step3 Select a WAV file and click Save

Step4 If you would like to truncate or clip the audio file, select the Use markers checkbox and drag the Start marker and End marker sliders. Do one of the following

● Click the Truncate button to remove the beginning and end of the audio file (the sections outside of the start and end markers).

● Click the Clip button to remove the audio file section inside the start and end markers.

Step5 To hear a preview of the file, click the Play button

Step6 Click OK

Part 3 Secret about adding audio to the photo?

If you’re looking to add audio to a photo in a straightforward manner, here’s a tip for you than going complex. It’s because the software or programs available are highly problematic when it comes to better understanding. Thus, using the ideal program is the best way out (and a secret)!

We have to admit that customization is quite trendy among the young generation. Customizing a unique album is a cool thing, too.

A professional editing tool would be an ideal helper to do this (hence, the reason you’re here). While a great variety of music management software and video editors support adding audio to images, Wondershare Filmora stands out for its efficiency, simplicity, and robust capability.

To get started, consider a free trial copy of Wondershare Filmora

Step1 Import Media

Hit the “Import” tab to load your songs from ripped CDs or downloaded from the internet.

Then drag and drop your image in a format like JPEG, JPG, JPE, GIF, BMP, DIB, PNG, JFIF, TIFF, TIF to the media library panel. Now you’ll consider using all the imported files displayed as thumbnails in the Media library.

Step2 Drag and Drop to add photos to audio

Drag songs and photos from the Media Library to the Timeline accordingly.

Filmora assists you in adding various photos to the audio. You can highlight the image and hover your mouse to the last section.

Click the “set duration” icon on the toolbar and set it to fit your music file’s length.

Tips: You can zoom-out or zoom-in on the Timeline in the top right corner by dragging the timeline slider to find the ideal position easily.

Check the effect in the preview window after this. If possible, you can ramp up your creation, e.g., add captions, apply special effects, transitions, and even create a picture-in-picture effect.

Step3 Save Music with Photos

When you’re satisfied with the outcomes, hit the Export tab.

Then, select MP4 under the format tab in the output window, or if you want to play the media on your phone, you can choose the device in the Export window and choose target devices among iPad, iPhone, or Apple TV, etc. Filmora will create a proper setting for phone device saving.

Bonus tips

Rip audio from video: If you wish to extract audio from a movie trailer, film, comedy, TV show, etc., highlight the video file in the Timeline tab, right-click it and choose the “Audio Detach” tab, then you can eliminate the original video stream and save in a new MP3 format, and now you can freely add your images to the ripped music.

Or, you can delete the original audio file and add a new one.

Conclusion

So, that’s all you had to know about adding audio to photo. We’ve discussed all the questions you’re wandering on how to add audio to photo online and mentioned the different ways by which you can do the same.

As the uploading speed is slow, we highly suggest using Filmora to add audio to photos. Besides, Filmora provides 50 plus sounds that you can use. Try it now!

02 [How to add audio to a photo?](#Part 2)

03 [Secret about adding audio to the photo?](#Part 3)

Part 1 Can I add audio to the photo?

Yes, it’s possible to add audio to photo, and we have various methods to do this. One of the simplest methods is arranging images into slideshows and adding audio.

Yes, there are different ways by which you can add audio to photo online or offline, including both the easiest and most brutal ways. Let’s list out some general courses as follows!

● The first and common way is by making a slideshow or photo collage like a video and adding background music as audio.

● You can use an image collage app or add audio to a photo app for Android or iPhone devices.

● Lastly, you can add audio to the photo online editor or online video editing program and include voiceover or background music.

All in all, it’s possible to add audio to photo provided you’ve to look straightforward and quick ways of doing so.

Part 2 How to add audio to a photo?

ACDSee supports images with embedded audio and photos with associated audio files. Images with embedded audio are JPEG or TIFF images saved inside the photo folder. You can embed audio inside the folder of photos by adding audio to the photo online.

Images with associated audio are photos are merged with individual WAV audio files. The photo folders and their associated audio files contain the same file name and are placed within the same folder.

You can associate any WAV file with a photo by assigning them the same name and locating them in the same folder or adding audio to the photo.

Note: If you rename or move either an audio file or an image file associated with it, you must rename both the folders or they will not associate for longer. It does not apply to photos with embedded audio.

Steps to add audio to photo via ACDSee

Do one of the following:

● Select an image in Manage mode.

● Open an image in View mode.

Step1 Click Tools | Image Audio | Edit

Step2 In the Edit Audio dialog box, click the Browse button

Step3 Select a WAV file and click Save

Step4 If you would like to truncate or clip the audio file, select the Use markers checkbox and drag the Start marker and End marker sliders. Do one of the following

● Click the Truncate button to remove the beginning and end of the audio file (the sections outside of the start and end markers).

● Click the Clip button to remove the audio file section inside the start and end markers.

Step5 To hear a preview of the file, click the Play button

Step6 Click OK

Part 3 Secret about adding audio to the photo?

If you’re looking to add audio to a photo in a straightforward manner, here’s a tip for you than going complex. It’s because the software or programs available are highly problematic when it comes to better understanding. Thus, using the ideal program is the best way out (and a secret)!

We have to admit that customization is quite trendy among the young generation. Customizing a unique album is a cool thing, too.

A professional editing tool would be an ideal helper to do this (hence, the reason you’re here). While a great variety of music management software and video editors support adding audio to images, Wondershare Filmora stands out for its efficiency, simplicity, and robust capability.

To get started, consider a free trial copy of Wondershare Filmora

Step1 Import Media

Hit the “Import” tab to load your songs from ripped CDs or downloaded from the internet.

Then drag and drop your image in a format like JPEG, JPG, JPE, GIF, BMP, DIB, PNG, JFIF, TIFF, TIF to the media library panel. Now you’ll consider using all the imported files displayed as thumbnails in the Media library.

Step2 Drag and Drop to add photos to audio

Drag songs and photos from the Media Library to the Timeline accordingly.

Filmora assists you in adding various photos to the audio. You can highlight the image and hover your mouse to the last section.

Click the “set duration” icon on the toolbar and set it to fit your music file’s length.

Tips: You can zoom-out or zoom-in on the Timeline in the top right corner by dragging the timeline slider to find the ideal position easily.

Check the effect in the preview window after this. If possible, you can ramp up your creation, e.g., add captions, apply special effects, transitions, and even create a picture-in-picture effect.

Step3 Save Music with Photos

When you’re satisfied with the outcomes, hit the Export tab.

Then, select MP4 under the format tab in the output window, or if you want to play the media on your phone, you can choose the device in the Export window and choose target devices among iPad, iPhone, or Apple TV, etc. Filmora will create a proper setting for phone device saving.

Bonus tips

Rip audio from video: If you wish to extract audio from a movie trailer, film, comedy, TV show, etc., highlight the video file in the Timeline tab, right-click it and choose the “Audio Detach” tab, then you can eliminate the original video stream and save in a new MP3 format, and now you can freely add your images to the ripped music.

Or, you can delete the original audio file and add a new one.

Conclusion

So, that’s all you had to know about adding audio to photo. We’ve discussed all the questions you’re wandering on how to add audio to photo online and mentioned the different ways by which you can do the same.

As the uploading speed is slow, we highly suggest using Filmora to add audio to photos. Besides, Filmora provides 50 plus sounds that you can use. Try it now!

02 [How to add audio to a photo?](#Part 2)

03 [Secret about adding audio to the photo?](#Part 3)

Part 1 Can I add audio to the photo?

Yes, it’s possible to add audio to photo, and we have various methods to do this. One of the simplest methods is arranging images into slideshows and adding audio.

Yes, there are different ways by which you can add audio to photo online or offline, including both the easiest and most brutal ways. Let’s list out some general courses as follows!

● The first and common way is by making a slideshow or photo collage like a video and adding background music as audio.

● You can use an image collage app or add audio to a photo app for Android or iPhone devices.

● Lastly, you can add audio to the photo online editor or online video editing program and include voiceover or background music.

All in all, it’s possible to add audio to photo provided you’ve to look straightforward and quick ways of doing so.

Part 2 How to add audio to a photo?

ACDSee supports images with embedded audio and photos with associated audio files. Images with embedded audio are JPEG or TIFF images saved inside the photo folder. You can embed audio inside the folder of photos by adding audio to the photo online.

Images with associated audio are photos are merged with individual WAV audio files. The photo folders and their associated audio files contain the same file name and are placed within the same folder.

You can associate any WAV file with a photo by assigning them the same name and locating them in the same folder or adding audio to the photo.

Note: If you rename or move either an audio file or an image file associated with it, you must rename both the folders or they will not associate for longer. It does not apply to photos with embedded audio.

Steps to add audio to photo via ACDSee

Do one of the following:

● Select an image in Manage mode.

● Open an image in View mode.

Step1 Click Tools | Image Audio | Edit

Step2 In the Edit Audio dialog box, click the Browse button

Step3 Select a WAV file and click Save

Step4 If you would like to truncate or clip the audio file, select the Use markers checkbox and drag the Start marker and End marker sliders. Do one of the following

● Click the Truncate button to remove the beginning and end of the audio file (the sections outside of the start and end markers).

● Click the Clip button to remove the audio file section inside the start and end markers.

Step5 To hear a preview of the file, click the Play button

Step6 Click OK

Part 3 Secret about adding audio to the photo?

If you’re looking to add audio to a photo in a straightforward manner, here’s a tip for you than going complex. It’s because the software or programs available are highly problematic when it comes to better understanding. Thus, using the ideal program is the best way out (and a secret)!

We have to admit that customization is quite trendy among the young generation. Customizing a unique album is a cool thing, too.

A professional editing tool would be an ideal helper to do this (hence, the reason you’re here). While a great variety of music management software and video editors support adding audio to images, Wondershare Filmora stands out for its efficiency, simplicity, and robust capability.

To get started, consider a free trial copy of Wondershare Filmora

Step1 Import Media

Hit the “Import” tab to load your songs from ripped CDs or downloaded from the internet.

Then drag and drop your image in a format like JPEG, JPG, JPE, GIF, BMP, DIB, PNG, JFIF, TIFF, TIF to the media library panel. Now you’ll consider using all the imported files displayed as thumbnails in the Media library.

Step2 Drag and Drop to add photos to audio

Drag songs and photos from the Media Library to the Timeline accordingly.

Filmora assists you in adding various photos to the audio. You can highlight the image and hover your mouse to the last section.

Click the “set duration” icon on the toolbar and set it to fit your music file’s length.

Tips: You can zoom-out or zoom-in on the Timeline in the top right corner by dragging the timeline slider to find the ideal position easily.

Check the effect in the preview window after this. If possible, you can ramp up your creation, e.g., add captions, apply special effects, transitions, and even create a picture-in-picture effect.

Step3 Save Music with Photos

When you’re satisfied with the outcomes, hit the Export tab.

Then, select MP4 under the format tab in the output window, or if you want to play the media on your phone, you can choose the device in the Export window and choose target devices among iPad, iPhone, or Apple TV, etc. Filmora will create a proper setting for phone device saving.

Bonus tips

Rip audio from video: If you wish to extract audio from a movie trailer, film, comedy, TV show, etc., highlight the video file in the Timeline tab, right-click it and choose the “Audio Detach” tab, then you can eliminate the original video stream and save in a new MP3 format, and now you can freely add your images to the ripped music.

Or, you can delete the original audio file and add a new one.

Conclusion

So, that’s all you had to know about adding audio to photo. We’ve discussed all the questions you’re wandering on how to add audio to photo online and mentioned the different ways by which you can do the same.

As the uploading speed is slow, we highly suggest using Filmora to add audio to photos. Besides, Filmora provides 50 plus sounds that you can use. Try it now!

02 [How to add audio to a photo?](#Part 2)

03 [Secret about adding audio to the photo?](#Part 3)

Part 1 Can I add audio to the photo?

Yes, it’s possible to add audio to photo, and we have various methods to do this. One of the simplest methods is arranging images into slideshows and adding audio.

Yes, there are different ways by which you can add audio to photo online or offline, including both the easiest and most brutal ways. Let’s list out some general courses as follows!

● The first and common way is by making a slideshow or photo collage like a video and adding background music as audio.

● You can use an image collage app or add audio to a photo app for Android or iPhone devices.

● Lastly, you can add audio to the photo online editor or online video editing program and include voiceover or background music.

All in all, it’s possible to add audio to photo provided you’ve to look straightforward and quick ways of doing so.

Part 2 How to add audio to a photo?

ACDSee supports images with embedded audio and photos with associated audio files. Images with embedded audio are JPEG or TIFF images saved inside the photo folder. You can embed audio inside the folder of photos by adding audio to the photo online.

Images with associated audio are photos are merged with individual WAV audio files. The photo folders and their associated audio files contain the same file name and are placed within the same folder.

You can associate any WAV file with a photo by assigning them the same name and locating them in the same folder or adding audio to the photo.

Note: If you rename or move either an audio file or an image file associated with it, you must rename both the folders or they will not associate for longer. It does not apply to photos with embedded audio.

Steps to add audio to photo via ACDSee

Do one of the following:

● Select an image in Manage mode.

● Open an image in View mode.

Step1 Click Tools | Image Audio | Edit

Step2 In the Edit Audio dialog box, click the Browse button

Step3 Select a WAV file and click Save

Step4 If you would like to truncate or clip the audio file, select the Use markers checkbox and drag the Start marker and End marker sliders. Do one of the following

● Click the Truncate button to remove the beginning and end of the audio file (the sections outside of the start and end markers).

● Click the Clip button to remove the audio file section inside the start and end markers.

Step5 To hear a preview of the file, click the Play button

Step6 Click OK

Part 3 Secret about adding audio to the photo?

If you’re looking to add audio to a photo in a straightforward manner, here’s a tip for you than going complex. It’s because the software or programs available are highly problematic when it comes to better understanding. Thus, using the ideal program is the best way out (and a secret)!

We have to admit that customization is quite trendy among the young generation. Customizing a unique album is a cool thing, too.

A professional editing tool would be an ideal helper to do this (hence, the reason you’re here). While a great variety of music management software and video editors support adding audio to images, Wondershare Filmora stands out for its efficiency, simplicity, and robust capability.

To get started, consider a free trial copy of Wondershare Filmora

Step1 Import Media

Hit the “Import” tab to load your songs from ripped CDs or downloaded from the internet.

Then drag and drop your image in a format like JPEG, JPG, JPE, GIF, BMP, DIB, PNG, JFIF, TIFF, TIF to the media library panel. Now you’ll consider using all the imported files displayed as thumbnails in the Media library.

Step2 Drag and Drop to add photos to audio

Drag songs and photos from the Media Library to the Timeline accordingly.

Filmora assists you in adding various photos to the audio. You can highlight the image and hover your mouse to the last section.

Click the “set duration” icon on the toolbar and set it to fit your music file’s length.

Tips: You can zoom-out or zoom-in on the Timeline in the top right corner by dragging the timeline slider to find the ideal position easily.

Check the effect in the preview window after this. If possible, you can ramp up your creation, e.g., add captions, apply special effects, transitions, and even create a picture-in-picture effect.

Step3 Save Music with Photos

When you’re satisfied with the outcomes, hit the Export tab.

Then, select MP4 under the format tab in the output window, or if you want to play the media on your phone, you can choose the device in the Export window and choose target devices among iPad, iPhone, or Apple TV, etc. Filmora will create a proper setting for phone device saving.

Bonus tips

Rip audio from video: If you wish to extract audio from a movie trailer, film, comedy, TV show, etc., highlight the video file in the Timeline tab, right-click it and choose the “Audio Detach” tab, then you can eliminate the original video stream and save in a new MP3 format, and now you can freely add your images to the ripped music.

Or, you can delete the original audio file and add a new one.

Conclusion

So, that’s all you had to know about adding audio to photo. We’ve discussed all the questions you’re wandering on how to add audio to photo online and mentioned the different ways by which you can do the same.

As the uploading speed is slow, we highly suggest using Filmora to add audio to photos. Besides, Filmora provides 50 plus sounds that you can use. Try it now!

“Instantaneous Sound Sanitization: Effective Ways to Combat Unwanted Static Noise”

It will be challenging to remove static noise from audio since the language is often muddled by ambient noise, such as the dreaded whirring of an air conditioning unit or fans. This can make it challenging to get good audio. It is common practice to eliminate background noise before recording and mixing sound effects or working on other areas of the video’s design.

You are lucky since the Internet allows you to choose a few strategies for removing noise from audio. You may lessen the amount of noise in your video or audio recording by including some background music or by utilizing software that edits audio or video. This article will significantly assist you in searching for a method to remove static sound from audio, so keep that in mind as you read it. Let’s get started!

Part 1: How to Remove Static Noise from Audio Files with Only & Free tools?

Consider shaky or unclear video to be a problem. Audio noise may damage your video just as fast as poor visual quality. It may be tricky to remove static sound from audio, however. Additionally, it might be difficult to capture clear audio, particularly in busy areas. There are occasions when you get hissy or otherwise noisy audio, whether because of background noise or less-than-ideal equipment.

1. Audiodenoise

The tool lets you change many things, like the time smoothing of the noise reduction filter, the noise model based on tracking noise modulation, the size of the analysis blocks, etc. So, how do you remove the static audio in the background?

Here are the steps to take.

How to use Audio Denoise to get rid of static noise

Step1 Click on the “Choose File” option to start. You can also choose the video from the list of “Demo files.”

Step2 Press the Process button after you’ve uploaded the file to eliminate the noise in the audio.

Step3 After the audio is done being processed, click the Download button to save your video to your PC.

2. Wondershare AILab

You may remove static from audio by using Wondershare AILab. There is no need to specify any settings since the AI will identify and eliminate noise on its own automatically. To improve audio quality, use a noise reduction technique based on AI. No more noise will be from the breeze, the crowd, or another unwelcome sound. AILab gives you access to various free online tools that make creating images, sounds, and videos simpler and more enjoyable.

How to use Wondershare AILab to remove static sound from audio

Step1 First, choose or drag your audio file to start uploading it.

Step2 The AI will analyze the file automatically and eliminate the static sound.

Step3 Finally, at this moment, download the revised audio file.

3. Veed.io

With VEED, you can simultaneously record your computer screen and camera, making it simple to produce instructional films for professional or personal use.

VEED is one of the most straightforward online video editors that can remove static from audio with just one click of the mouse, making it an excellent choice for people who are just starting. You don’t need to re-record your audio or purchase expensive microphones that block sound. It can help you eliminate background noise from MP3, WMA, and other audio files, but with a watermark.

How do I remove static sound from the audio file using Veed online?

Step1 To upload your audio file, click the “Choose Audio” button to upload your audio file.

Step2 Click on the audio track to open the Settings menu, then choose “Clean Audio” from the list of options. The background noise will vanish on its own in a few seconds.

Step3 That’s it; you’re done. When you click “Export,” you will make your new file in a few seconds.

Part 2: How to improve your audio in the best way?

Wondershare is the company that has produced the Filmora family of video production and editing apps. Filmora offers software that may be used by various skill levels, from novice to intermediate. A timeline, a preview window, and an effects library are some of the standard elements of Filmora. These features are accessed and controlled by a drag-and-drop user interface.

Free Download For Win 7 or later(64-bit)

Free Download For macOS 10.14 or later

The Filmora software collection may run on machines running either Windows or macOS operating systems. It is possible to get free product samples to test them out before buying them. On the official Filmora website, you can see pricing choices for each program.

The Filmora Video Editor is easy to use and delivers various features superior to those provided by other video editors. Because of this, it is considered one of the best audio editors to answer how to remove static from audio and video.

Here is how to remove static noise from audio with Filmora.

Step1 Upload Files

Open Wondershare Filmora and load your video into the timeline window. You can get a video preview, cut it up, and remove the bits you don’t want to preserve.

Step2 Edit Audio

Select “Edit Audio” by using the context menu after right-clicking the movie in the timeline. You will see four options: silence detection, modify audio, disconnect audio, and mute. Choose the “Audio” option from the drop-down menu if you want to separate the audio from the video.

Step3 Remove Background Static

Double-click on the audio track to eliminate the background noise directly, and pick “normal denoise” from the Edit Panel. You may also double-click the video clip in the timeline to reach the Editing panel without first separating the audio from the video. Once there, you can edit the audio and eliminate the noise by clicking on the Audio tab in the Editing panel.

Step4 Fine Tune and Export

Lastly, with Equalizer, fine-tune the sound to make it more natural. For a better effect, adjust the audio frame by frame until it fits perfectly with the video. After the result, you can click “Export” to save the less noisy video on your PC or directly post it to YouTube or Vimeo.

Part 3: How to Record Noise-Free Audio?

So, that was how to remove static sound from audio. But what if you record noise-free audio instead?

If you record with a microphone and continue to hear static noise, the problem most likely lies in the cable. Most microphone cables consist of one or two conductors (wires) braided together inside a metal. This is the function that protection fulfills. It prevents the hum or static created by signals coming from outside from interfering with the signal flowing via the internal conductors.

If one of the shield connections at either end of the wire is only sometimes present or isn’t there, this might produce static electricity. If you can access the connection, check that all cables and shields are connected safely and securely.

Near a stable electromagnetic source is another possible explanation for static, which may be industrial motors or high-power radio transmitters.

Another characteristic of microphones is their impedance. It would be best to use microphone with the same impedance as the recording device.

One last step is to test the static using a different microphone to determine whether the problem persists. If this is the case, the recording device can be the source of the issue.

Conclusion

Do you believe that a grainy or unsteady video is a problem? Video quality is vital, but audio noise can quickly damage your film. However, removing static sound from audio may be a pain in the neck. In addition, capturing clear audio may be challenging, particularly in areas with a lot of background noise.

Now you have an audio file with less or no noise and want to learn how to remove static noise from audio. With the above suggestions, I hope you’ll find eliminating background noise from the video easy. If you want to be more creative in removing static noise from audio, try the Filmora video editor to give your mind a boost.

Free Download For macOS 10.14 or later

The Filmora software collection may run on machines running either Windows or macOS operating systems. It is possible to get free product samples to test them out before buying them. On the official Filmora website, you can see pricing choices for each program.

The Filmora Video Editor is easy to use and delivers various features superior to those provided by other video editors. Because of this, it is considered one of the best audio editors to answer how to remove static from audio and video.

Here is how to remove static noise from audio with Filmora.

Step1 Upload Files

Open Wondershare Filmora and load your video into the timeline window. You can get a video preview, cut it up, and remove the bits you don’t want to preserve.

Step2 Edit Audio

Select “Edit Audio” by using the context menu after right-clicking the movie in the timeline. You will see four options: silence detection, modify audio, disconnect audio, and mute. Choose the “Audio” option from the drop-down menu if you want to separate the audio from the video.

Step3 Remove Background Static

Double-click on the audio track to eliminate the background noise directly, and pick “normal denoise” from the Edit Panel. You may also double-click the video clip in the timeline to reach the Editing panel without first separating the audio from the video. Once there, you can edit the audio and eliminate the noise by clicking on the Audio tab in the Editing panel.

Step4 Fine Tune and Export

Lastly, with Equalizer, fine-tune the sound to make it more natural. For a better effect, adjust the audio frame by frame until it fits perfectly with the video. After the result, you can click “Export” to save the less noisy video on your PC or directly post it to YouTube or Vimeo.

Part 3: How to Record Noise-Free Audio?

So, that was how to remove static sound from audio. But what if you record noise-free audio instead?

If you record with a microphone and continue to hear static noise, the problem most likely lies in the cable. Most microphone cables consist of one or two conductors (wires) braided together inside a metal. This is the function that protection fulfills. It prevents the hum or static created by signals coming from outside from interfering with the signal flowing via the internal conductors.

If one of the shield connections at either end of the wire is only sometimes present or isn’t there, this might produce static electricity. If you can access the connection, check that all cables and shields are connected safely and securely.

Near a stable electromagnetic source is another possible explanation for static, which may be industrial motors or high-power radio transmitters.

Another characteristic of microphones is their impedance. It would be best to use microphone with the same impedance as the recording device.

One last step is to test the static using a different microphone to determine whether the problem persists. If this is the case, the recording device can be the source of the issue.

Conclusion

Do you believe that a grainy or unsteady video is a problem? Video quality is vital, but audio noise can quickly damage your film. However, removing static sound from audio may be a pain in the neck. In addition, capturing clear audio may be challenging, particularly in areas with a lot of background noise.

Now you have an audio file with less or no noise and want to learn how to remove static noise from audio. With the above suggestions, I hope you’ll find eliminating background noise from the video easy. If you want to be more creative in removing static noise from audio, try the Filmora video editor to give your mind a boost.

Also read: